summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)AuthorFilesLines
2020-03-12net: mptcp: don't hang before sending 'MP capable with data'Davide Caratti1-0/+4
the following packetdrill script socket(..., SOCK_STREAM, IPPROTO_MPTCP) = 3 fcntl(3, F_GETFL) = 0x2 (flags O_RDWR) fcntl(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0 connect(3, ..., ...) = -1 EINPROGRESS (Operation now in progress) > S 0:0(0) <mss 1460,sackOK,TS val 100 ecr 0,nop,wscale 8,mpcapable v1 flags[flag_h] nokey> < S. 0:0(0) ack 1 win 65535 <mss 1460,sackOK,TS val 700 ecr 100,nop,wscale 8,mpcapable v1 flags[flag_h] key[skey=2]> > . 1:1(0) ack 1 win 256 <nop, nop, TS val 100 ecr 700,mpcapable v1 flags[flag_h] key[ckey,skey]> getsockopt(3, SOL_SOCKET, SO_ERROR, [0], [4]) = 0 fcntl(3, F_SETFL, O_RDWR) = 0 write(3, ..., 1000) = 1000 doesn't transmit 1KB data packet after a successful three-way-handshake, using mp_capable with data as required by protocol v1, and write() hangs forever: PID: 973 TASK: ffff97dd399cae80 CPU: 1 COMMAND: "packetdrill" #0 [ffffa9b94062fb78] __schedule at ffffffff9c90a000 #1 [ffffa9b94062fc08] schedule at ffffffff9c90a4a0 #2 [ffffa9b94062fc18] schedule_timeout at ffffffff9c90e00d #3 [ffffa9b94062fc90] wait_woken at ffffffff9c120184 #4 [ffffa9b94062fcb0] sk_stream_wait_connect at ffffffff9c75b064 #5 [ffffa9b94062fd20] mptcp_sendmsg at ffffffff9c8e801c #6 [ffffa9b94062fdc0] sock_sendmsg at ffffffff9c747324 #7 [ffffa9b94062fdd8] sock_write_iter at ffffffff9c7473c7 #8 [ffffa9b94062fe48] new_sync_write at ffffffff9c302976 #9 [ffffa9b94062fed0] vfs_write at ffffffff9c305685 #10 [ffffa9b94062ff00] ksys_write at ffffffff9c305985 #11 [ffffa9b94062ff38] do_syscall_64 at ffffffff9c004475 #12 [ffffa9b94062ff50] entry_SYSCALL_64_after_hwframe at ffffffff9ca0008c RIP: 00007f959407eaf7 RSP: 00007ffe9e95a910 RFLAGS: 00000293 RAX: ffffffffffffffda RBX: 0000000000000008 RCX: 00007f959407eaf7 RDX: 00000000000003e8 RSI: 0000000001785fe0 RDI: 0000000000000008 RBP: 0000000001785fe0 R8: 0000000000000000 R9: 0000000000000003 R10: 0000000000000007 R11: 0000000000000293 R12: 00000000000003e8 R13: 00007ffe9e95ae30 R14: 0000000000000000 R15: 0000000000000000 ORIG_RAX: 0000000000000001 CS: 0033 SS: 002b Fix it ensuring that socket state is TCP_ESTABLISHED on reception of the third ack. Fixes: 1954b86016cf ("mptcp: Check connection state before attempting send") Suggested-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12net: Add missing annotation for *netlink_seq_start()Jules Irenge1-0/+1
Sparse reports a warning at netlink_seq_start() warning: context imbalance in netlink_seq_start() - wrong count at exit The root cause is the missing annotation at netlink_seq_start() Add the missing __acquires(RCU) annotation Signed-off-by: Jules Irenge <jbi.octave@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12tcp: Add missing annotation for tcp_child_process()Jules Irenge1-0/+1
Sparse reports warning at tcp_child_process() warning: context imbalance in tcp_child_process() - unexpected unlock The root cause is the missing annotation at tcp_child_process() Add the missing __releases(&((child)->sk_lock.slock)) annotation Signed-off-by: Jules Irenge <jbi.octave@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12raw: Add missing annotations to raw_seq_start() and raw_seq_stop()Jules Irenge1-0/+2
Sparse reports warnings at raw_seq_start() and raw_seq_stop() warning: context imbalance in raw_seq_start() - wrong count at exit warning: context imbalance in raw_seq_stop() - unexpected unlock The root cause is the missing annotations at raw_seq_start() and raw_seq_stop() Add the missing __acquires(&h->lock) annotation Add the missing __releases(&h->lock) annotation Signed-off-by: Jules Irenge <jbi.octave@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12net: sched: make newly activated qdiscs visibleJulian Wiedmann2-0/+22
In their .attach callback, mq[prio] only add the qdiscs of the currently active TX queues to the device's qdisc hash list. If a user later increases the number of active TX queues, their qdiscs are not visible via eg. 'tc qdisc show'. Add a hook to netif_set_real_num_tx_queues() that walks all active TX queues and adds those which are missing to the hash list. CC: Eric Dumazet <edumazet@google.com> CC: Jamal Hadi Salim <jhs@mojatatu.com> CC: Cong Wang <xiyou.wangcong@gmail.com> CC: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-11pktgen: Allow on loopback deviceLukas Wunner1-2/+2
When pktgen is used to measure the performance of dev_queue_xmit() packet handling in the core, it is preferable to not hand down packets to a low-level Ethernet driver as it would distort the measurements. Allow using pktgen on the loopback device, thus constraining measurements to core code. Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10mptcp: don't grow mptcp socket receive buffer when rcvbuf is lockedFlorian Westphal1-4/+6
The mptcp rcvbuf size is adjusted according to the subflow rcvbuf size. This should not be done if userspace did set a fixed value. Fixes: 600911ff5f72bae ("mptcp: add rmem queue accounting") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10Merge tag 'batadv-next-for-davem-20200306' of ↵David S. Miller3-6/+6
git://git.open-mesh.org/linux-merge Simon Wunderlich says: ==================== This cleanup patchset includes the following patches: - bump version strings, by Simon Wunderlich - Avoid RCU list-traversal in spinlock, by Sven Eckelmann - Replace zero-length array with flexible-array member, by Gustavo A. R. Silva ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10net: sched: pie: change tc_pie_xstats->probLeslie Monis1-1/+1
Commit 105e808c1da2 ("pie: remove pie_vars->accu_prob_overflows") changes the scale of probability values in PIE from (2^64 - 1) to (2^56 - 1). This affects the precision of tc_pie_xstats->prob in user space. This patch ensures user space is unaffected. Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Leslie Monis <lesliemonis@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10tcp: add bytes not sent to SCM_TIMESTAMPING_OPT_STATSYousuk Seung1-0/+3
Add TCP_NLA_BYTES_NOTSENT to SCM_TIMESTAMPING_OPT_STATS that reports bytes in the write queue but not sent. This is the same metric as what is exported with tcp_info.tcpi_notsent_bytes. Signed-off-by: Yousuk Seung <ysseung@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09net/sched: act_ct: fix lockdep splat in tcf_ct_flow_table_getEric Dumazet1-13/+11
Convert zones_lock spinlock to zones_mutex mutex, and struct (tcf_ct_flow_table)->ref to a refcount, so that control path can use regular GFP_KERNEL allocations from standard process context. This is more robust in case of memory pressure. The refcount is needed because tcf_ct_flow_table_put() can be called from RCU callback, thus in BH context. The issue was spotted by syzbot, as rhashtable_init() was called with a spinlock held, which is bad since GFP_KERNEL allocations can sleep. Note to developers : Please make sure your patches are tested with CONFIG_DEBUG_ATOMIC_SLEEP=y BUG: sleeping function called from invalid context at mm/slab.h:565 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 9582, name: syz-executor610 2 locks held by syz-executor610/9582: #0: ffffffff8a34eb80 (rtnl_mutex){+.+.}, at: rtnl_lock net/core/rtnetlink.c:72 [inline] #0: ffffffff8a34eb80 (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x3f9/0xad0 net/core/rtnetlink.c:5437 #1: ffffffff8a3961b8 (zones_lock){+...}, at: spin_lock_bh include/linux/spinlock.h:343 [inline] #1: ffffffff8a3961b8 (zones_lock){+...}, at: tcf_ct_flow_table_get+0xa3/0x1700 net/sched/act_ct.c:67 Preemption disabled at: [<0000000000000000>] 0x0 CPU: 0 PID: 9582 Comm: syz-executor610 Not tainted 5.6.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x188/0x20d lib/dump_stack.c:118 ___might_sleep.cold+0x1f4/0x23d kernel/sched/core.c:6798 slab_pre_alloc_hook mm/slab.h:565 [inline] slab_alloc_node mm/slab.c:3227 [inline] kmem_cache_alloc_node_trace+0x272/0x790 mm/slab.c:3593 __do_kmalloc_node mm/slab.c:3615 [inline] __kmalloc_node+0x38/0x60 mm/slab.c:3623 kmalloc_node include/linux/slab.h:578 [inline] kvmalloc_node+0x61/0xf0 mm/util.c:574 kvmalloc include/linux/mm.h:645 [inline] kvzalloc include/linux/mm.h:653 [inline] bucket_table_alloc+0x8b/0x480 lib/rhashtable.c:175 rhashtable_init+0x3d2/0x750 lib/rhashtable.c:1054 nf_flow_table_init+0x16d/0x310 net/netfilter/nf_flow_table_core.c:498 tcf_ct_flow_table_get+0xe33/0x1700 net/sched/act_ct.c:82 tcf_ct_init+0xba4/0x18a6 net/sched/act_ct.c:1050 tcf_action_init_1+0x697/0xa20 net/sched/act_api.c:945 tcf_action_init+0x1e9/0x2f0 net/sched/act_api.c:1001 tcf_action_add+0xdb/0x370 net/sched/act_api.c:1411 tc_ctl_action+0x366/0x456 net/sched/act_api.c:1466 rtnetlink_rcv_msg+0x44e/0xad0 net/core/rtnetlink.c:5440 netlink_rcv_skb+0x15a/0x410 net/netlink/af_netlink.c:2478 netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline] netlink_unicast+0x537/0x740 net/netlink/af_netlink.c:1329 netlink_sendmsg+0x882/0xe10 net/netlink/af_netlink.c:1918 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:672 ____sys_sendmsg+0x6b9/0x7d0 net/socket.c:2343 ___sys_sendmsg+0x100/0x170 net/socket.c:2397 __sys_sendmsg+0xec/0x1b0 net/socket.c:2430 do_syscall_64+0xf6/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x4403d9 Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 fb 13 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffd719af218 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 00000000004403d9 RDX: 0000000000000000 RSI: 0000000020000300 RDI: 0000000000000003 RBP: 00000000006ca018 R08: 0000000000000005 R09: 00000000004002c8 R10: 0000000000000008 R11: 00000000000 Fixes: c34b961a2492 ("net/sched: act_ct: Create nf flow table per zone") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Paul Blakey <paulb@mellanox.com> Cc: Jiri Pirko <jiri@mellanox.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09sched: act: allow user to specify type of HW stats for a filterJiri Pirko2-0/+43
Currently, user who is adding an action expects HW to report stats, however it does not have exact expectations about the stats types. That is aligned with TCA_ACT_HW_STATS_TYPE_ANY. Allow user to specify the type of HW stats for an action and require it. Pass the information down to flow_offload layer. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09flow_offload: check for basic action hw stats typeJiri Pirko1-0/+4
Introduce flow_action_basic_hw_stats_types_check() helper and use it in drivers. That sanitizes the drivers which do not have support for action HW stats types. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-06net: sched: Make FIFO Qdisc offloadablePetr Machata1-6/+91
Invoke ndo_setup_tc() as appropriate to signal init / replacement, destroying and dumping of pFIFO / bFIFO Qdisc. A lot of the FIFO logic is used for pFIFO_head_drop as well, but that's a semantically very different Qdisc that isn't really in the same boat as pFIFO / bFIFO. Split some of the functions to keep the Qdisc intact. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-05ethtool: add infrastructure for centralized checking of coalescing parametersJakub Kicinski1-0/+66
Linux supports 22 different interrupt coalescing parameters. No driver implements them all. Some drivers just ignore the ones they don't support, while others have to carry a long list of checks to reject unsupported settings. To simplify the drivers add the ability to specify inside ethtool_ops which parameters are supported and let the core reject attempts to set any other one. This commit makes the mechanism an opt-in, only drivers which set ethtool_opts->coalesce_types to a non-zero value will have the checks enforced. The same mask is used for global and per queue settings. v3: - move the (temporary) check if driver defines types earlier (Michal) - rename used_types -> nonzero_params, and coalesce_types -> supported_coalesce_params (Alex) - use EOPNOTSUPP instead of EINVAL (Andrew, Michal) Leaving the long series of ifs for now, it seems nice to be able to grep for the field and flag names. This will probably have to be revisited once netlink support lands. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-05hsr: fix refcnt leak of hsr slave interfaceTaehee Yoo1-4/+1
In the commit e0a4b99773d3 ("hsr: use upper/lower device infrastructure"), dev_get() was removed but dev_put() in the error path wasn't removed. So, if creating hsr interface command is failed, the reference counter leak of lower interface would occur. Test commands: ip link add dummy0 type dummy ip link add ipvlan0 link dummy0 type ipvlan mode l2 ip link add ipvlan1 link dummy0 type ipvlan mode l2 ip link add hsr0 type hsr slave1 ipvlan0 slave2 ipvlan1 ip link del ipvlan0 Result: [ 633.271992][ T1280] unregister_netdevice: waiting for ipvlan0 to become free. Usage count = -1 Fixes: e0a4b99773d3 ("hsr: use upper/lower device infrastructure") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-05net: mscc: ocelot: eliminate confusion between CPU and NPI portVladimir Oltean1-1/+2
Ocelot has the concept of a CPU port. The CPU port is represented in the forwarding and the queueing system, but it is not a physical device. The CPU port can either be accessed via register-based injection/extraction (which is the case of Ocelot), via Frame-DMA (similar to the first one), or "connected" to a physical Ethernet port (called NPI in the datasheet) which is the case of the Felix DSA switch. In Ocelot the CPU port is at index 11. In Felix the CPU port is at index 6. The CPU bit is treated special in the forwarding, as it is never cleared from the forwarding port mask (once added to it). Other than that, it is treated the same as a normal front port. Both Felix and Ocelot should use the CPU port in the same way. This means that Felix should not use the NPI port directly when forwarding to the CPU, but instead use the CPU port. This patch is fixing this such that Felix will use port 6 as its CPU port, and just use the NPI port to carry the traffic. Therefore, eliminate the "ocelot->cpu" variable which was holding the index of the NPI port for Felix, and the index of the CPU port module for Ocelot, so the variable was actually configuring different things for different drivers and causing at least part of the confusion. Also remove the "ocelot->num_cpu_ports" variable, which is the result of another confusion. The 2 CPU ports mentioned in the datasheet are because there are two frame extraction channels (register based or DMA based). This is of no relevance to the driver at the moment, and invisible to the analyzer module. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Suggested-by: Allan W. Nielsen <allan.nielsen@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-05pie: remove pie_vars->accu_prob_overflowsLeslie Monis2-16/+6
The variable pie_vars->accu_prob is used as an accumulator for probability values. Since probabilty values are scaled using the MAX_PROB macro denoting (2^64 - 1), pie_vars->accu_prob is likely to overflow as it is of type u64. The variable pie_vars->accu_prob_overflows counts the number of times the variable pie_vars->accu_prob overflows. The MAX_PROB macro needs to be equal to at least (2^39 - 1) in order to do precise calculations without any underflow. Thus MAX_PROB can be reduced to (2^56 - 1) without affecting the precision in calculations drastically. Doing so will eliminate the need for the variable pie_vars->accu_prob_overflows as the variable pie_vars->accu_prob will never overflow. Removing the variable pie_vars->accu_prob_overflows also reduces the size of the structure pie_vars to exactly 64 bytes. Signed-off-by: Mohit P. Tahiliani <tahiliani@nitk.edu.in> Signed-off-by: Gautam Ramakrishnan <gautamramk@gmail.com> Signed-off-by: Leslie Monis <lesliemonis@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-05pie: remove unnecessary type castingLeslie Monis1-2/+2
In function pie_calculate_probability(), the variables alpha and beta are of type u64. The variables qdelay, qdelay_old and params->target are of type psched_time_t (which is also u64). The explicit type casting done when calculating the value for the variable delta is redundant and not required. Signed-off-by: Mohit P. Tahiliani <tahiliani@nitk.edu.in> Signed-off-by: Gautam Ramakrishnan <gautamramk@gmail.com> Signed-off-by: Leslie Monis <lesliemonis@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-05pie: use term backlog instead of qlenLeslie Monis1-11/+11
Remove ambiguity by using the term backlog instead of qlen when representing the queue length in bytes. Signed-off-by: Mohit P. Tahiliani <tahiliani@nitk.edu.in> Signed-off-by: Gautam Ramakrishnan <gautamramk@gmail.com> Signed-off-by: Leslie Monis <lesliemonis@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-04net/sched: act_ct: Use pskb_network_may_pull()Paul Blakey1-8/+8
To make the filler functions more generic, use network relative skb pulling. Signed-off-by: Paul Blakey <paulb@mellanox.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-04net/sched: act_ct: Fix ipv6 lookup of offloaded connectionsPaul Blakey1-34/+26
When checking the protocol number tcf_ct_flow_table_lookup() handles the flow as if it's always ipv4, while it can be ipv6. Instead, refactor the code to fetch the tcp header, if available, in the relevant family (ipv4/ipv6) filler function, and do the check on the returned tcp header. Fixes: 46475bb20f4b ("net/sched: act_ct: Software offload of established flows") Signed-off-by: Paul Blakey <paulb@mellanox.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-04net: dsa: Add bypass operations for the flower classifier-action filterVladimir Oltean1-0/+60
Due to the immense variety of classification keys and actions available for tc-flower, as well as due to potentially very different DSA switch capabilities, it doesn't make a lot of sense for the DSA mid layer to even attempt to interpret these. So just pass them on to the underlying switch driver. DSA implements just the standard boilerplate for binding and unbinding flow blocks to ports, since nobody wants to deal with that. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-04net: qrtr: Fix FIXME related to qrtr_ns_init()Bjorn Andersson3-11/+3
The 2 second delay before calling qrtr_ns_init() meant that the remote processors would register as endpoints in qrtr and the say_hello() call would therefor broadcast the outgoing HELLO to them. With the HELLO handshake corrected this delay is no longer needed. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-04net: qrtr: Respond to HELLO messageBjorn Andersson1-24/+30
Lost in the translation from the user space implementation was the detail that HELLO mesages must be exchanged between each node pair. As such the incoming HELLO must be replied to. Similar to the previous implementation no effort is made to prevent two Linux boxes from continuously sending HELLO messages back and forth, this is left to a follow up patch. say_hello() is moved, to facilitate the new call site. Fixes: 0c2204a4ad71 ("net: qrtr: Migrate nameservice to kernel from userspace") Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-04mptcp: Only send DATA_FIN with final mappingMat Martineau1-5/+6
When a DATA_FIN is sent in a MPTCP DSS option that contains a data mapping, the DATA_FIN consumes one byte of space in the mapping. In this case, the DATA_FIN should only be included in the DSS option if its sequence number aligns with the end of the mapped data. Otherwise the subflow can send an incorrect implicit sequence number for the DATA_FIN, and the DATA_ACK for that sequence number would not close the MPTCP-level connection correctly. Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-04mptcp: Use per-subflow storage for DATA_FIN sequence numberMat Martineau3-6/+21
Instead of reading the MPTCP-level sequence number when sending DATA_FIN, store the data in the subflow so it can be safely accessed when the subflow TCP headers are written to the packet without the MPTCP-level lock held. This also allows the MPTCP-level socket to close individual subflows without closing the MPTCP connection. Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-04mptcp: Check connection state before attempting sendMat Martineau1-2/+10
MPTCP should wait for an active connection or skip sending depending on the connection state, as TCP does. This happens before the possible passthrough to a regular TCP sendmsg because the subflow's socket type (MPTCP or TCP fallback) is not known until the connection is complete. This is also relevent at disconnect time, where data should not be sent in certain MPTCP-level connection states. Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-04devlink: Introduce devlink port flavour virtualParav Pandit1-0/+2
Currently mlx5 PCI PF and VF devlink devices register their ports as physical port in non-representors mode. Introduce a new port flavour as virtual so that virtual devices can register 'virtual' flavour to make it more clear to users. An example of one PCI PF and 2 PCI virtual functions, each having one devlink port. $ devlink port show pci/0000:06:00.0/1: type eth netdev ens2f0 flavour physical port 0 pci/0000:06:00.2/1: type eth netdev ens2f2 flavour virtual port 0 pci/0000:06:00.3/1: type eth netdev ens2f3 flavour virtual port 0 Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-04net/sched: act_ct: Software offload of established flowsPaul Blakey1-2/+158
Offload nf conntrack processing by looking up the 5-tuple in the zone's flow table. The nf conntrack module will process the packets until a connection is in established state. Once in established state, the ct state pointer (nf_conn) will be restored on the skb from a successful ft lookup. Signed-off-by: Paul Blakey <paulb@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-04net/sched: act_ct: Offload established connections to flow tablePaul Blakey1-0/+63
Add a ft entry when connections enter an established state and delete the connections when they leave the established state. The flow table assumes ownership of the connection. In the following patch act_ct will lookup the ct state from the FT. In future patches, drivers will register for callbacks for ft add/del events and will be able to use the information to offload the connections. Note that connection aging is managed by the FT. Signed-off-by: Paul Blakey <paulb@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-04net/sched: act_ct: Create nf flow table per zonePaul Blakey2-2/+134
Use the NF flow tables infrastructure for CT offload. Create a nf flow table per zone. Next patches will add FT entries to this table, and do the software offload. Signed-off-by: Paul Blakey <paulb@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-04ipv6: Use math to point per net sysctls into the appropriate struct netCambda Zhu1-17/+4
The data pointers of ipv6 sysctl are set one by one which is hard to maintain, especially with kconfig. This patch simplifies it by using math to point the per net sysctls into the appropriate struct net, just like what we did for ipv4. Signed-off-by: Cambda Zhu <cambda@linux.alibaba.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-01ethtool: Factored out similar ethtool link settings for virtual devices to coreCris Forno1-0/+39
Three virtual devices (ibmveth, virtio_net, and netvsc) all have similar code to set link settings and validate ethtool command. To eliminate duplication of code, it is factored out into core/ethtool.c. Signed-off-by: Cris Forno <cforno12@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-01hsr: use upper/lower device infrastructureTaehee Yoo3-30/+40
netdev_upper_dev_link() is useful to manage lower/upper interfaces. And this function internally validates looping, maximum depth. All or most virtual interfaces that could have a real interface (e.g. macsec, macvlan, ipvlan etc.) use lower/upper infrastructure. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-01hsr: remove unnecessary rcu_read_lock() in hsr moduleTaehee Yoo3-37/+16
In order to access the port list, the hsr_port_get_hsr() is used. And this is protected by RTNL and RCU. The hsr_fill_info(), hsr_check_carrier(), hsr_dev_open() and hsr_get_max_mtu() are protected by RTNL. So, rcu_read_lock() in these functions are not necessary. The hsr_handle_frame() also uses rcu_read_lock() but this function is called by packet path. It's already protected by RCU. So, the rcu_read_lock() in hsr_handle_frame() can be removed. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-01hsr: use netdev_err() instead of WARN_ONCE()Taehee Yoo1-1/+2
When HSR interface is sending a frame, it finds a node with the destination ethernet address from the list. If there is no node, it calls WARN_ONCE(). But, using WARN_ONCE() for this situation is a little bit overdoing. So, in this patch, the netdev_err() is used instead. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-01hsr: use extack error message instead of netdev_infoTaehee Yoo5-21/+35
If HSR uses the extack instead of netdev_info(), users can get error messages immediately without any checking the kernel message. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-01hsr: use debugfs_remove_recursive() instead of debugfs_remove()Taehee Yoo2-5/+1
If it uses debugfs_remove_recursive() instead of debugfs_remove(), hsr_priv() doesn't need to have "node_tbl_file" pointer variable. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-01net: sched: Replace zero-length array with flexible-array memberGustavo A. R. Silva4-4/+4
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller11-187/+516
Alexei Starovoitov says: ==================== pull-request: bpf-next 2020-02-28 The following pull-request contains BPF updates for your *net-next* tree. We've added 41 non-merge commits during the last 7 day(s) which contain a total of 49 files changed, 1383 insertions(+), 499 deletions(-). The main changes are: 1) BPF and Real-Time nicely co-exist. 2) bpftool feature improvements. 3) retrieve bpf_sk_storage via INET_DIAG. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-28net: datagram: drop 'destructor' argument from several helpersPaolo Abeni4-27/+21
The only users for such argument are the UDP protocol and the UNIX socket family. We can safely reclaim the accounted memory directly from the UDP code and, after the previous patch, we can do scm stats accounting outside the datagram helpers. Overall this cleans up a bit some datagram-related helpers, and avoids an indirect call per packet in the UDP receive path. v1 -> v2: - call scm_stat_del() only when not peeking - Kirill - fix build issue with CONFIG_INET_ESPINTCP Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-28unix: uses an atomic type for scm files accountingPaolo Abeni1-15/+6
So the scm_stat_{add,del} helper can be invoked with no additional lock held. This clean-up the code a bit and will make the next patch easier. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-28net: core: Replace zero-length array with flexible-array memberGustavo A. R. Silva3-3/+3
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-28ipv6: Replace zero-length array with flexible-array memberGustavo A. R. Silva2-2/+2
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-28net: dccp: Replace zero-length array with flexible-array memberGustavo A. R. Silva1-1/+1
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-28l2tp: Replace zero-length array with flexible-array memberGustavo A. R. Silva1-1/+1
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] Lastly, fix the following checkpatch warning: CHECK: Prefer kernel type 'u8' over 'uint8_t' #50: FILE: net/l2tp/l2tp_core.h:119: + uint8_t priv[]; /* private data */ This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-28net: mpls: Replace zero-length array with flexible-array memberGustavo A. R. Silva1-2/+2
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-28xdp: Replace zero-length array with flexible-array memberGustavo A. R. Silva1-2/+2
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Acked-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-28bpf: inet_diag: Dump bpf_sk_storages in inet_diag_dump()Martin KaFai Lau1-0/+74
This patch will dump out the bpf_sk_storages of a sk if the request has the INET_DIAG_REQ_SK_BPF_STORAGES nlattr. An array of SK_DIAG_BPF_STORAGE_REQ_MAP_FD can be specified in INET_DIAG_REQ_SK_BPF_STORAGES to select which bpf_sk_storage to dump. If no map_fd is specified, all bpf_sk_storages of a sk will be dumped. bpf_sk_storages can be added to the system at runtime. It is difficult to find a proper static value for cb->min_dump_alloc. This patch learns the nlattr size required to dump the bpf_sk_storages of a sk. If it happens to be the very first nlmsg of a dump and it cannot fit the needed bpf_sk_storages, it will try to expand the skb by "pskb_expand_head()". Instead of expanding it in inet_sk_diag_fill(), it is expanded at a sleepable context in __inet_diag_dump() so __GFP_DIRECT_RECLAIM can be used. In __inet_diag_dump(), it will retry as long as the skb is empty and the cb->min_dump_alloc becomes larger than before. cb->min_dump_alloc is bounded by KMALLOC_MAX_SIZE. The min_dump_alloc is also changed from 'u16' to 'u32' to accommodate a sk that may have a few large bpf_sk_storages. The updated cb->min_dump_alloc will also be used to allocate the skb in the next dump. This logic already exists in netlink_dump(). Here is the sample output of a locally modified 'ss' and it could be made more readable by using BTF later: [root@arch-fb-vm1 ~]# ss --bpf-map-id 14 --bpf-map-id 13 -t6an 'dst [::1]:8989' State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess ESTAB 0 0 [::1]:51072 [::1]:8989 bpf_map_id:14 value:[ 3feb ] bpf_map_id:13 value:[ 3f ] ESTAB 0 0 [::1]:51070 [::1]:8989 bpf_map_id:14 value:[ 3feb ] bpf_map_id:13 value:[ 3f ] [root@arch-fb-vm1 ~]# ~/devshare/github/iproute2/misc/ss --bpf-maps -t6an 'dst [::1]:8989' State Recv-Q Send-Q Local Address:Port Peer Address:Port Process ESTAB 0 0 [::1]:51072 [::1]:8989 bpf_map_id:14 value:[ 3feb ] bpf_map_id:13 value:[ 3f ] bpf_map_id:12 value:[ 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000... total:65407 ] ESTAB 0 0 [::1]:51070 [::1]:8989 bpf_map_id:14 value:[ 3feb ] bpf_map_id:13 value:[ 3f ] bpf_map_id:12 value:[ 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000... total:65407 ] Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20200225230427.1976129-1-kafai@fb.com
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-17 07:29:06 +0300