summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)AuthorFilesLines
2018-08-22Convert net_namespace to new IDA APIMatthew Wilcox1-10/+6
Signed-off-by: Matthew Wilcox <willy@infradead.org>
2018-08-09dsa: slave: eee: Allow ports to use phylinkAndrew Lunn1-2/+2
For a port to be able to use EEE, both the MAC and the PHY must support EEE. A phy can be provided by both a phydev or phylink. Verify at least one of these exist, not just phydev. Fixes: aab9c4067d23 ("net: dsa: Plug in PHYLINK support") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09net/smc: move sock lock in smc_ioctl()Ursula Braun1-3/+7
When an SMC socket is connecting it is decided whether fallback to TCP is needed. To avoid races between connect and ioctl move the sock lock before the use_fallback check. Reported-by: syzbot+5b2cece1a8ecb2ca77d8@syzkaller.appspotmail.com Reported-by: syzbot+19557374321ca3710990@syzkaller.appspotmail.com Fixes: 1992d99882af ("net/smc: take sock lock in smc_ioctl()") Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09net/smc: allow sysctl rmem and wmem defaults for serversUrsula Braun1-0/+2
Without setsockopt SO_SNDBUF and SO_RCVBUF settings, the sysctl defaults net.ipv4.tcp_wmem and net.ipv4.tcp_rmem should be the base for the sizes of the SMC sndbuf and rcvbuf. Any TCP buffer size optimizations for servers should be ignored. Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09net/smc: no shutdown in state SMC_LISTENUrsula Braun1-2/+1
Invoking shutdown for a socket in state SMC_LISTEN does not make sense. Nevertheless programs like syzbot fuzzing the kernel may try to do this. For SMC this means a socket refcounting problem. This patch makes sure a shutdown call for an SMC socket in state SMC_LISTEN simply returns with -ENOTCONN. Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09rxrpc: Fix the keepalive generator [ver #2]David Howells7-89/+109
AF_RXRPC has a keepalive message generator that generates a message for a peer ~20s after the last transmission to that peer to keep firewall ports open. The implementation is incorrect in the following ways: (1) It mixes up ktime_t and time64_t types. (2) It uses ktime_get_real(), the output of which may jump forward or backward due to adjustments to the time of day. (3) If the current time jumps forward too much or jumps backwards, the generator function will crank the base of the time ring round one slot at a time (ie. a 1s period) until it catches up, spewing out VERSION packets as it goes. Fix the problem by: (1) Only using time64_t. There's no need for sub-second resolution. (2) Use ktime_get_seconds() rather than ktime_get_real() so that time isn't perceived to go backwards. (3) Simplifying rxrpc_peer_keepalive_worker() by splitting it into two parts: (a) The "worker" function that manages the buckets and the timer. (b) The "dispatch" function that takes the pending peers and potentially transmits a keepalive packet before putting them back in the ring into the slot appropriate to the revised last-Tx time. (4) Taking everything that's pending out of the ring and splicing it into a temporary collector list for processing. In the case that there's been a significant jump forward, the ring gets entirely emptied and then the time base can be warped forward before the peers are processed. The warping can't happen if the ring isn't empty because the slot a peer is in is keepalive-time dependent, relative to the base time. (5) Limit the number of iterations of the bucket array when scanning it. (6) Set the timer to skip any empty slots as there's no point waking up if there's nothing to do yet. This can be triggered by an incoming call from a server after a reboot with AF_RXRPC and AFS built into the kernel causing a peer record to be set up before userspace is started. The system clock is then adjusted by userspace, thereby potentially causing the keepalive generator to have a meltdown - which leads to a message like: watchdog: BUG: soft lockup - CPU#0 stuck for 23s! [kworker/0:1:23] ... Workqueue: krxrpcd rxrpc_peer_keepalive_worker EIP: lock_acquire+0x69/0x80 ... Call Trace: ? rxrpc_peer_keepalive_worker+0x5e/0x350 ? _raw_spin_lock_bh+0x29/0x60 ? rxrpc_peer_keepalive_worker+0x5e/0x350 ? rxrpc_peer_keepalive_worker+0x5e/0x350 ? __lock_acquire+0x3d3/0x870 ? process_one_work+0x110/0x340 ? process_one_work+0x166/0x340 ? process_one_work+0x110/0x340 ? worker_thread+0x39/0x3c0 ? kthread+0xdb/0x110 ? cancel_delayed_work+0x90/0x90 ? kthread_stop+0x70/0x70 ? ret_from_fork+0x19/0x24 Fixes: ace45bec6d77 ("rxrpc: Fix firewall route keepalive") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-08llc: use refcount_inc_not_zero() for llc_sap_find()Cong Wang1-2/+2
llc_sap_put() decreases the refcnt before deleting sap from the global list. Therefore, there is a chance llc_sap_find() could find a sap with zero refcnt in this global list. Close this race condition by checking if refcnt is zero or not in llc_sap_find(), if it is zero then it is being removed so we can just treat it as gone. Reported-by: <syzbot+278893f3f7803871f7ce@syzkaller.appspotmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-08dccp: fix undefined behavior with 'cwnd' shift in ccid2_cwnd_restart()Alexey Kodanev1-2/+4
The shift of 'cwnd' with '(now - hc->tx_lsndtime) / hc->tx_rto' value can lead to undefined behavior [1]. In order to fix this use a gradual shift of the window with a 'while' loop, similar to what tcp_cwnd_restart() is doing. When comparing delta and RTO there is a minor difference between TCP and DCCP, the last one also invokes dccp_cwnd_restart() and reduces 'cwnd' if delta equals RTO. That case is preserved in this change. [1]: [40850.963623] UBSAN: Undefined behaviour in net/dccp/ccids/ccid2.c:237:7 [40851.043858] shift exponent 67 is too large for 32-bit type 'unsigned int' [40851.127163] CPU: 3 PID: 15940 Comm: netstress Tainted: G W E 4.18.0-rc7.x86_64 #1 ... [40851.377176] Call Trace: [40851.408503] dump_stack+0xf1/0x17b [40851.451331] ? show_regs_print_info+0x5/0x5 [40851.503555] ubsan_epilogue+0x9/0x7c [40851.548363] __ubsan_handle_shift_out_of_bounds+0x25b/0x2b4 [40851.617109] ? __ubsan_handle_load_invalid_value+0x18f/0x18f [40851.686796] ? xfrm4_output_finish+0x80/0x80 [40851.739827] ? lock_downgrade+0x6d0/0x6d0 [40851.789744] ? xfrm4_prepare_output+0x160/0x160 [40851.845912] ? ip_queue_xmit+0x810/0x1db0 [40851.895845] ? ccid2_hc_tx_packet_sent+0xd36/0x10a0 [dccp] [40851.963530] ccid2_hc_tx_packet_sent+0xd36/0x10a0 [dccp] [40852.029063] dccp_xmit_packet+0x1d3/0x720 [dccp] [40852.086254] dccp_write_xmit+0x116/0x1d0 [dccp] [40852.142412] dccp_sendmsg+0x428/0xb20 [dccp] [40852.195454] ? inet_dccp_listen+0x200/0x200 [dccp] [40852.254833] ? sched_clock+0x5/0x10 [40852.298508] ? sched_clock+0x5/0x10 [40852.342194] ? inet_create+0xdf0/0xdf0 [40852.388988] sock_sendmsg+0xd9/0x160 ... Fixes: 113ced1f52e5 ("dccp ccid-2: Perform congestion-window validation") Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-07tipc: fix an interrupt unsafe locking scenarioYing Xue1-3/+1
Commit 9faa89d4ed9d ("tipc: make function tipc_net_finalize() thread safe") tries to make it thread safe to set node address, so it uses node_list_lock lock to serialize the whole process of setting node address in tipc_net_finalize(). But it causes the following interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- rht_deferred_worker() rhashtable_rehash_table() lock(&(&ht->lock)->rlock) tipc_nl_compat_doit() tipc_net_finalize() local_irq_disable(); lock(&(&tn->node_list_lock)->rlock); tipc_sk_reinit() rhashtable_walk_enter() lock(&(&ht->lock)->rlock); <Interrupt> tipc_disc_rcv() tipc_node_check_dest() tipc_node_create() lock(&(&tn->node_list_lock)->rlock); *** DEADLOCK *** When rhashtable_rehash_table() holds ht->lock on CPU0, it doesn't disable BH. So if an interrupt happens after the lock, it can create an inverse lock ordering between ht->lock and tn->node_list_lock. As a consequence, deadlock might happen. The reason causing the inverse lock ordering scenario above is because the initial purpose of node_list_lock is not designed to do the serialization of node address setting. As cmpxchg() can guarantee CAS (compare-and-swap) process is atomic, we use it to replace node_list_lock to ensure setting node address can be atomically finished. It turns out the potential deadlock can be avoided as well. Fixes: 9faa89d4ed9d ("tipc: make function tipc_net_finalize() thread safe") Signed-off-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <maloy@donjonn.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-07vsock: split dwork to avoid reinitializationsCong Wang2-9/+9
syzbot reported that we reinitialize an active delayed work in vsock_stream_connect(): ODEBUG: init active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x90 kernel/workqueue.c:1414 WARNING: CPU: 1 PID: 11518 at lib/debugobjects.c:329 debug_print_object+0x16a/0x210 lib/debugobjects.c:326 The pattern is apparently wrong, we should only initialize the dealyed work once and could repeatly schedule it. So we have to move out the initializations to allocation side. And to avoid confusion, we can split the shared dwork into two, instead of re-using the same one. Fixes: d021c344051a ("VSOCK: Introduce VM Sockets") Reported-by: <syzbot+8a9b1bd330476a4f3db6@syzkaller.appspotmail.com> Cc: Andy king <acking@vmware.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Cc: Jorgen Hansen <jhansen@vmware.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-06packet: refine ring v3 block size test to hold one frameWillem de Bruijn1-4/+6
TPACKET_V3 stores variable length frames in fixed length blocks. Blocks must be able to store a block header, optional private space and at least one minimum sized frame. Frames, even for a zero snaplen packet, store metadata headers and optional reserved space. In the block size bounds check, ensure that the frame of the chosen configuration fits. This includes sockaddr_ll and optional tp_reserve. Syzbot was able to construct a ring with insuffient room for the sockaddr_ll in the header of a zero-length frame, triggering an out-of-bounds write in dev_parse_header. Convert the comparison to less than, as zero is a valid snap len. This matches the test for minimum tp_frame_size immediately below. Fixes: f6fb8f100b80 ("af-packet: TPACKET_V3 flexible buffer implementation.") Fixes: eb73190f4fbe ("net/packet: refine check for priv area size") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-06ip6_tunnel: use the right value for ipv4 min mtu check in ip6_tnl_xmitXin Long1-6/+2
According to RFC791, 68 bytes is the minimum size of IPv4 datagram every device must be able to forward without further fragmentation while 576 bytes is the minimum size of IPv4 datagram every device has to be able to receive, so in ip6_tnl_xmit(), 68(IPV4_MIN_MTU) should be the right value for the ipv4 min mtu check in ip6_tnl_xmit. While at it, change to use max() instead of if statement. Fixes: c9fefa08190f ("ip6_tunnel: get the min mtu properly in ip6_tnl_xmit") Reported-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-06ipv6: fix double refcount of fib6_metricsCong Wang1-4/+0
All the callers of ip6_rt_copy_init()/rt6_set_from() hold refcnt of the "from" fib6_info, so there is no need to hold fib6_metrics refcnt again, because fib6_metrics refcnt is only released when fib6_info is gone, that is, they have the same life time, so the whole fib6_metrics refcnt can be removed actually. This fixes a kmemleak warning reported by Sabrina. Fixes: 93531c674315 ("net/ipv6: separate handling of FIB entries from dst based routes") Reported-by: Sabrina Dubroca <sd@queasysnail.net> Cc: Sabrina Dubroca <sd@queasysnail.net> Cc: David Ahern <dsahern@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-05netlink: Don't shift on 64 for ngroupsDmitry Safonov1-2/+2
It's legal to have 64 groups for netlink_sock. As user-supplied nladdr->nl_groups is __u32, it's possible to subscribe only to first 32 groups. The check for correctness of .bind() userspace supplied parameter is done by applying mask made from ngroups shift. Which broke Android as they have 64 groups and the shift for mask resulted in an overflow. Fixes: 61f4b23769f0 ("netlink: Don't shift with UB on nlk->ngroups") Cc: "David S. Miller" <davem@davemloft.net> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: netdev@vger.kernel.org Cc: stable@vger.kernel.org Reported-and-Tested-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller1-3/+1
Daniel Borkmann says: ==================== pull-request: bpf 2018-08-05 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix bpftool percpu_array dump by using correct roundup to next multiple of 8 for the value size, from Yonghong. 2) Fix in AF_XDP's __xsk_rcv_zc() to not returning frames back to allocator since driver will recycle frame anyway in case of an error, from Jakub. 3) Fix up BPF test_lwt_seg6local test cases to final iproute2 syntax, from Mathieu. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-04net/smc: no cursor update send in state SMC_INITUrsula Braun1-1/+2
If a writer blocked condition is received without data, the current consumer cursor is immediately sent. Servers could already receive this condition in state SMC_INIT without finished tx-setup. This patch avoids sending a consumer cursor update in this case. Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-03l2tp: fix missing refcount drop in pppol2tp_tunnel_ioctl()Guillaume Nault1-4/+9
If 'session' is not NULL and is not a PPP pseudo-wire, then we fail to drop the reference taken by l2tp_session_get(). Fixes: ecd012e45ab5 ("l2tp: filter out non-PPP sessions in pppol2tp_tunnel_ioctl()") Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-02Revert "net/ipv6: fix metrics leak"David S. Miller1-14/+4
This reverts commit df18b50448fab1dff093731dfd0e25e77e1afcd1. This change causes other problems and use-after-free situations as found by syzbot. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-01rxrpc: Fix user call ID check in rxrpc_service_prealloc_oneYueHaibing1-2/+2
There just check the user call ID isn't already in use, hence should compare user_call_ID with xcall->user_call_ID, which is current node's user_call_ID. Fixes: 540b1c48c37a ("rxrpc: Fix deadlock between call creation and sendmsg/recvmsg") Suggested-by: David Howells <dhowells@redhat.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-01net: dsa: Do not suspend/resume closed slave_devFlorian Fainelli1-0/+6
If a DSA slave network device was previously disabled, there is no need to suspend or resume it. Fixes: 2446254915a7 ("net: dsa: allow switch drivers to implement suspend/resume hooks") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-01netlink: Fix spectre v1 gadget in netlink_create()Jeremy Cline1-0/+2
'protocol' is a user-controlled value, so sanitize it after the bounds check to avoid using it for speculative out-of-bounds access to arrays indexed by it. This addresses the following accesses detected with the help of smatch: * net/netlink/af_netlink.c:654 __netlink_create() warn: potential spectre issue 'nlk_cb_mutex_keys' [w] * net/netlink/af_netlink.c:654 __netlink_create() warn: potential spectre issue 'nlk_cb_mutex_key_strings' [w] * net/netlink/af_netlink.c:685 netlink_create() warn: potential spectre issue 'nl_table' [w] (local cap) Cc: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Jeremy Cline <jcline@redhat.com> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-01ipv4: frags: handle possible skb truesize changeEric Dumazet1-0/+5
ip_frag_queue() might call pskb_pull() on one skb that is already in the fragment queue. We need to take care of possible truesize change, or we might have an imbalance of the netns frags memory usage. IPv6 is immune to this bug, because RFC5722, Section 4, amended by Errata ID 3089 states : When reassembling an IPv6 datagram, if one or more its constituent fragments is determined to be an overlapping fragment, the entire datagram (and any constituent fragments) MUST be silently discarded. Fixes: 158f323b9868 ("net: adjust skb->truesize in pskb_expand_head()") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-01inet: frag: enforce memory limits earlierEric Dumazet1-3/+3
We currently check current frags memory usage only when a new frag queue is created. This allows attackers to first consume the memory budget (default : 4 MB) creating thousands of frag queues, then sending tiny skbs to exceed high_thresh limit by 2 to 3 order of magnitude. Note that before commit 648700f76b03 ("inet: frags: use rhashtables for reassembly units"), work queue could be starved under DOS, getting no cpu cycles. After commit 648700f76b03, only the per frag queue timer can eventually remove an incomplete frag queue and its skbs. Fixes: b13d3cbfb8e8 ("inet: frag: move eviction of queues to work queue") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Jann Horn <jannh@google.com> Cc: Florian Westphal <fw@strlen.de> Cc: Peter Oskolkov <posk@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-31net: xsk: don't return frames via the allocator on errorJakub Kicinski1-3/+1
xdp_return_buff() is used when frame has been successfully handled (transmitted) or if an error occurred during delayed processing and there is no way to report it back to xdp_do_redirect(). In case of __xsk_rcv_zc() error is propagated all the way back to the driver, so there is no need to call xdp_return_buff(). Driver will recycle the frame anyway after seeing that error happened. Fixes: 173d3adb6f43 ("xsk: add zero-copy support for Rx") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-30netlink: Don't shift with UB on nlk->ngroupsDmitry Safonov1-1/+5
On i386 nlk->ngroups might be 32 or 0. Which leads to UB, resulting in hang during boot. Check for 0 ngroups and use (unsigned long long) as a type to shift. Fixes: 7acf9d4237c4 ("netlink: Do not subscribe to non-existent groups"). Reported-by: kernel test robot <rong.a.chen@intel.com> Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-30net/ipv6: fix metrics leakSabrina Dubroca1-4/+14
Since commit d4ead6b34b67 ("net/ipv6: move metrics from dst to rt6_info"), ipv6 metrics are shared and refcounted. rt6_set_from() assigns the rt->from pointer and increases the refcount on from's metrics. This reference is never released. Introduce the fib6_metrics_release() helper and use it to release the metrics. Fixes: d4ead6b34b67 ("net/ipv6: move metrics from dst to rt6_info") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-29openvswitch: meter: Fix setting meter id for new entriesJustin Pettit1-5/+5
The meter code would create an entry for each new meter. However, it would not set the meter id in the new entry, so every meter would appear to have a meter id of zero. This commit properly sets the meter id when adding the entry. Fixes: 96fbc13d7e77 ("openvswitch: Add meter infrastructure") Signed-off-by: Justin Pettit <jpettit@ovn.org> Cc: Andy Zhou <azhou@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-29netlink: Do not subscribe to non-existent groupsDmitry Safonov1-0/+1
Make ABI more strict about subscribing to group > ngroups. Code doesn't check for that and it looks bogus. (one can subscribe to non-existing group) Still, it's possible to bind() to all possible groups with (-1) Cc: "David S. Miller" <davem@davemloft.net> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: netdev@vger.kernel.org Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-29tcp_bbr: fix bw probing to raise in-flight data for very small BDPsNeal Cardwell1-0/+4
For some very small BDPs (with just a few packets) there was a quantization effect where the target number of packets in flight during the super-unity-gain (1.25x) phase of gain cycling was implicitly truncated to a number of packets no larger than the normal unity-gain (1.0x) phase of gain cycling. This meant that in multi-flow scenarios some flows could get stuck with a lower bandwidth, because they did not push enough packets inflight to discover that there was more bandwidth available. This was really only an issue in multi-flow LAN scenarios, where RTTs and BDPs are low enough for this to be an issue. This fix ensures that gain cycling can raise inflight for small BDPs by ensuring that in PROBE_BW mode target inflight values with a super-unity gain are always greater than inflight values with a gain <= 1. Importantly, this applies whether the inflight value is calculated for use as a cwnd value, or as a target inflight value for the end of the super-unity phase in bbr_is_next_cycle_phase() (both need to be bigger to ensure we can probe with more packets in flight reliably). This is a candidate fix for stable releases. Fixes: 0f8782ea1497 ("tcp_bbr: add BBR congestion control") Signed-off-by: Neal Cardwell <ncardwell@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Priyaranjan Jha <priyarjha@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-29net: socket: Fix potential spectre v1 gadget in sock_is_registeredJeremy Cline1-1/+2
'family' can be a user-controlled value, so sanitize it after the bounds check to avoid speculative out-of-bounds access. Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Jeremy Cline <jcline@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-29net: socket: fix potential spectre v1 gadget in socketcallJeremy Cline1-0/+2
'call' is a user-controlled value, so sanitize the array index after the bounds check to avoid speculating past the bounds of the 'nargs' array. Found with the help of Smatch: net/socket.c:2508 __do_sys_socketcall() warn: potential spectre issue 'nargs' [r] (local cap) Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Jeremy Cline <jcline@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller4-8/+11
Daniel Borkmann says: ==================== pull-request: bpf 2018-07-28 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) API fixes for libbpf's BTF mapping of map key/value types in order to make them compatible with iproute2's BPF_ANNOTATE_KV_PAIR() markings, from Martin. 2) Fix AF_XDP to not report POLLIN prematurely by using the non-cached consumer pointer of the RX queue, from Björn. 3) Fix __xdp_return() to check for NULL pointer after the rhashtable lookup that retrieves the allocator object, from Taehee. 4) Fix x86-32 JIT to adjust ebp register in prologue and epilogue by 4 bytes which got removed from overall stack usage, from Wang. 5) Fix bpf_skb_load_bytes_relative() length check to use actual packet length, from Daniel. 6) Fix uninitialized return code in libbpf bpf_perf_event_read_simple() handler, from Thomas. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-29ipv4: remove BUG_ON() from fib_compute_spec_dstLorenzo Bianconi1-2/+2
Remove BUG_ON() from fib_compute_spec_dst routine and check in_dev pointer during flowi4 data structure initialization. fib_compute_spec_dst routine can be run concurrently with device removal where ip_ptr net_device pointer is set to NULL. This can happen if userspace enables pkt info on UDP rx socket and the device is removed while traffic is flowing Fixes: 35ebf65e851c ("ipv4: Create and use fib_compute_spec_dst() helper") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-28bpf: use GFP_ATOMIC instead of GFP_KERNEL in bpf_parse_prog()Taehee Yoo1-1/+1
bpf_parse_prog() is protected by rcu_read_lock(). so that GFP_KERNEL is not allowed in the bpf_parse_prog(). [51015.579396] ============================= [51015.579418] WARNING: suspicious RCU usage [51015.579444] 4.18.0-rc6+ #208 Not tainted [51015.579464] ----------------------------- [51015.579488] ./include/linux/rcupdate.h:303 Illegal context switch in RCU read-side critical section! [51015.579510] other info that might help us debug this: [51015.579532] rcu_scheduler_active = 2, debug_locks = 1 [51015.579556] 2 locks held by ip/1861: [51015.579577] #0: 00000000a8c12fd1 (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x2e0/0x910 [51015.579711] #1: 00000000bf815f8e (rcu_read_lock){....}, at: lwtunnel_build_state+0x96/0x390 [51015.579842] stack backtrace: [51015.579869] CPU: 0 PID: 1861 Comm: ip Not tainted 4.18.0-rc6+ #208 [51015.579891] Hardware name: To be filled by O.E.M. To be filled by O.E.M./Aptio CRB, BIOS 5.6.5 07/08/2015 [51015.579911] Call Trace: [51015.579950] dump_stack+0x74/0xbb [51015.580000] ___might_sleep+0x16b/0x3a0 [51015.580047] __kmalloc_track_caller+0x220/0x380 [51015.580077] kmemdup+0x1c/0x40 [51015.580077] bpf_parse_prog+0x10e/0x230 [51015.580164] ? kasan_kmalloc+0xa0/0xd0 [51015.580164] ? bpf_destroy_state+0x30/0x30 [51015.580164] ? bpf_build_state+0xe2/0x3e0 [51015.580164] bpf_build_state+0x1bb/0x3e0 [51015.580164] ? bpf_parse_prog+0x230/0x230 [51015.580164] ? lock_is_held_type+0x123/0x1a0 [51015.580164] lwtunnel_build_state+0x1aa/0x390 [51015.580164] fib_create_info+0x1579/0x33d0 [51015.580164] ? sched_clock_local+0xe2/0x150 [51015.580164] ? fib_info_update_nh_saddr+0x1f0/0x1f0 [51015.580164] ? sched_clock_local+0xe2/0x150 [51015.580164] fib_table_insert+0x201/0x1990 [51015.580164] ? lock_downgrade+0x610/0x610 [51015.580164] ? fib_table_lookup+0x1920/0x1920 [51015.580164] ? lwtunnel_valid_encap_type.part.6+0xcb/0x3a0 [51015.580164] ? rtm_to_fib_config+0x637/0xbd0 [51015.580164] inet_rtm_newroute+0xed/0x1b0 [51015.580164] ? rtm_to_fib_config+0xbd0/0xbd0 [51015.580164] rtnetlink_rcv_msg+0x331/0x910 [ ... ] Fixes: 3a0af8fd61f9 ("bpf: BPF for lightweight tunnel infrastructure") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-28bpf: fix bpf_skb_load_bytes_relative pkt length checkDaniel Borkmann1-5/+7
The len > skb_headlen(skb) cannot be used as a maximum upper bound for the packet length since it does not have any relation to the full linear packet length when filtering is used from upper layers (e.g. in case of reuseport BPF programs) as by then skb->data, skb->len already got mangled through __skb_pull() and others. Fixes: 4e1ec56cdc59 ("bpf: add skb_load_bytes_relative helper") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com>
2018-07-27Merge branch 'master' of ↵David S. Miller4-13/+23
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== pull request (net): ipsec 2018-07-27 1) Fix PMTU handling of vti6. We update the PMTU on the xfrm dst_entry which is not cached anymore after the flowchache removal. So update the PMTU of the original dst_entry instead. From Eyal Birger. 2) Fix a leak of kernel memory to userspace. From Eric Dumazet. 3) Fix a possible dst_entry memleak in xfrm_lookup_route. From Tommi Rantala. 4) Fix a skb leak in case we can't call nlmsg_multicast from xfrm_nlmsg_multicast. From Florian Westphal. 5) Fix a leak of a temporary buffer in the error path of esp6_input. From Zhen Lei. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-27xdp: add NULL pointer check in __xdp_return()Taehee Yoo1-1/+2
rhashtable_lookup() can return NULL. so that NULL pointer check routine should be added. Fixes: 02b55e5657c3 ("xdp: add MEM_TYPE_ZERO_COPY") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-27RDS: RDMA: Fix the NULL-ptr deref in rds_ib_get_mrAvinash Repaka6-20/+39
Registration of a memory region(MR) through FRMR/fastreg(unlike FMR) needs a connection/qp. With a proxy qp, this dependency on connection will be removed, but that needs more infrastructure patches, which is a work in progress. As an intermediate fix, the get_mr returns EOPNOTSUPP when connection details are not populated. The MR registration through sendmsg() will continue to work even with fast registration, since connection in this case is formed upfront. This patch fixes the following crash: kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Modules linked in: CPU: 1 PID: 4244 Comm: syzkaller468044 Not tainted 4.16.0-rc6+ #361 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:rds_ib_get_mr+0x5c/0x230 net/rds/ib_rdma.c:544 RSP: 0018:ffff8801b059f890 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffff8801b07e1300 RCX: ffffffff8562d96e RDX: 000000000000000d RSI: 0000000000000001 RDI: 0000000000000068 RBP: ffff8801b059f8b8 R08: ffffed0036274244 R09: ffff8801b13a1200 R10: 0000000000000004 R11: ffffed0036274243 R12: ffff8801b13a1200 R13: 0000000000000001 R14: ffff8801ca09fa9c R15: 0000000000000000 FS: 00007f4d050af700(0000) GS:ffff8801db300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f4d050aee78 CR3: 00000001b0d9b006 CR4: 00000000001606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __rds_rdma_map+0x710/0x1050 net/rds/rdma.c:271 rds_get_mr_for_dest+0x1d4/0x2c0 net/rds/rdma.c:357 rds_setsockopt+0x6cc/0x980 net/rds/af_rds.c:347 SYSC_setsockopt net/socket.c:1849 [inline] SyS_setsockopt+0x189/0x360 net/socket.c:1828 do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x42/0xb7 RIP: 0033:0x4456d9 RSP: 002b:00007f4d050aedb8 EFLAGS: 00000246 ORIG_RAX: 0000000000000036 RAX: ffffffffffffffda RBX: 00000000006dac3c RCX: 00000000004456d9 RDX: 0000000000000007 RSI: 0000000000000114 RDI: 0000000000000004 RBP: 00000000006dac38 R08: 00000000000000a0 R09: 0000000000000000 R10: 0000000020000380 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fffbfb36d6f R14: 00007f4d050af9c0 R15: 0000000000000005 Code: fa 48 c1 ea 03 80 3c 02 00 0f 85 cc 01 00 00 4c 8b bb 80 04 00 00 48 b8 00 00 00 00 00 fc ff df 49 8d 7f 68 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 9c 01 00 00 4d 8b 7f 68 48 b8 00 00 00 00 00 RIP: rds_ib_get_mr+0x5c/0x230 net/rds/ib_rdma.c:544 RSP: ffff8801b059f890 ---[ end trace 7e1cea13b85473b0 ]--- Reported-by: syzbot+b51c77ef956678a65834@syzkaller.appspotmail.com Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: Avinash Repaka <avinash.repaka@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-27net: rollback orig value on failure of dev_qdisc_change_tx_queue_lenTariq Toukan1-7/+10
Fix dev_change_tx_queue_len so it rolls back original value upon a failure in dev_qdisc_change_tx_queue_len. This is already done for notifirers' failures, share the code. In case of failure in dev_qdisc_change_tx_queue_len, some tx queues would still be of the new length, while they should be reverted. Currently, the revert is not done, and is marked with a TODO label in dev_qdisc_change_tx_queue_len, and should find some nice solution to do it. Yet it is still better to not apply the newly requested value. Fixes: 48bfd55e7e41 ("net_sched: plug in qdisc ops change_tx_queue_len") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Reported-by: Ran Rozenstein <ranro@mellanox.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-26xsk: fix poll/POLLIN premature returnsBjörn Töpel1-1/+1
Polling for the ingress queues relies on reading the producer/consumer pointers of the Rx queue. Prior this commit, a cached consumer pointer could be used, instead of the actual consumer pointer and therefore report POLLIN prematurely. This patch makes sure that the non-cached consumer pointer is used instead. Reported-by: Qi Zhang <qi.z.zhang@intel.com> Tested-by: Qi Zhang <qi.z.zhang@intel.com> Fixes: c497176cb2e4 ("xsk: add Rx receive functions and poll support") Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-26net: igmp: make function __ip_mc_inc_group() staticWei Yongjun1-1/+2
Fixes the following sparse warnings: net/ipv4/igmp.c:1391:6: warning: symbol '__ip_mc_inc_group' was not declared. Should it be static? Fixes: 6e2059b53f98 ("ipv4/igmp: init group mode as INCLUDE when join source group") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-26tcp: ack immediately when a cwr packet arrivesLawrence Brakmo1-1/+8
We observed high 99 and 99.9% latencies when doing RPCs with DCTCP. The problem is triggered when the last packet of a request arrives CE marked. The reply will carry the ECE mark causing TCP to shrink its cwnd to 1 (because there are no packets in flight). When the 1st packet of the next request arrives, the ACK was sometimes delayed even though it is CWR marked, adding up to 40ms to the RPC latency. This patch insures that CWR marked data packets arriving will be acked immediately. Packetdrill script to reproduce the problem: 0.000 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 0.000 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 0.000 setsockopt(3, SOL_TCP, TCP_CONGESTION, "dctcp", 5) = 0 0.000 bind(3, ..., ...) = 0 0.000 listen(3, 1) = 0 0.100 < [ect0] SEW 0:0(0) win 32792 <mss 1000,sackOK,nop,nop,nop,wscale 7> 0.100 > SE. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 8> 0.110 < [ect0] . 1:1(0) ack 1 win 257 0.200 accept(3, ..., ...) = 4 0.200 < [ect0] . 1:1001(1000) ack 1 win 257 0.200 > [ect01] . 1:1(0) ack 1001 0.200 write(4, ..., 1) = 1 0.200 > [ect01] P. 1:2(1) ack 1001 0.200 < [ect0] . 1001:2001(1000) ack 2 win 257 0.200 write(4, ..., 1) = 1 0.200 > [ect01] P. 2:3(1) ack 2001 0.200 < [ect0] . 2001:3001(1000) ack 3 win 257 0.200 < [ect0] . 3001:4001(1000) ack 3 win 257 0.200 > [ect01] . 3:3(0) ack 4001 0.210 < [ce] P. 4001:4501(500) ack 3 win 257 +0.001 read(4, ..., 4500) = 4500 +0 write(4, ..., 1) = 1 +0 > [ect01] PE. 3:4(1) ack 4501 +0.010 < [ect0] W. 4501:5501(1000) ack 4 win 257 // Previously the ACK sequence below would be 4501, causing a long RTO +0.040~+0.045 > [ect01] . 4:4(0) ack 5501 // delayed ack +0.311 < [ect0] . 5501:6501(1000) ack 4 win 257 // More data +0 > [ect01] . 4:4(0) ack 6501 // now acks everything +0.500 < F. 9501:9501(0) ack 4 win 257 Modified based on comments by Neal Cardwell <ncardwell@google.com> Signed-off-by: Lawrence Brakmo <brakmo@fb.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-25ip: in cmsg IP(V6)_ORIGDSTADDR call pskb_may_pullWillem de Bruijn2-4/+10
Syzbot reported a read beyond the end of the skb head when returning IPV6_ORIGDSTADDR: BUG: KMSAN: kernel-infoleak in put_cmsg+0x5ef/0x860 net/core/scm.c:242 CPU: 0 PID: 4501 Comm: syz-executor128 Not tainted 4.17.0+ #9 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:113 kmsan_report+0x188/0x2a0 mm/kmsan/kmsan.c:1125 kmsan_internal_check_memory+0x138/0x1f0 mm/kmsan/kmsan.c:1219 kmsan_copy_to_user+0x7a/0x160 mm/kmsan/kmsan.c:1261 copy_to_user include/linux/uaccess.h:184 [inline] put_cmsg+0x5ef/0x860 net/core/scm.c:242 ip6_datagram_recv_specific_ctl+0x1cf3/0x1eb0 net/ipv6/datagram.c:719 ip6_datagram_recv_ctl+0x41c/0x450 net/ipv6/datagram.c:733 rawv6_recvmsg+0x10fb/0x1460 net/ipv6/raw.c:521 [..] This logic and its ipv4 counterpart read the destination port from the packet at skb_transport_offset(skb) + 4. With MSG_MORE and a local SOCK_RAW sender, syzbot was able to cook a packet that stores headers exactly up to skb_transport_offset(skb) in the head and the remainder in a frag. Call pskb_may_pull before accessing the pointer to ensure that it lies in skb head. Link: http://lkml.kernel.org/r/CAF=yD-LEJwZj5a1-bAAj2Oy_hKmGygV6rsJ_WOrAYnv-fnayiQ@mail.gmail.com Reported-by: syzbot+9adb4b567003cac781f0@syzkaller.appspotmail.com Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller6-147/+189
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Make sure we don't go over the maximum jump stack boundary, from Taehee Yoo. 2) Missing rcu_barrier() in hash and rbtree sets, also from Taehee. 3) Missing check to nul-node in rbtree timeout routine, from Taehee. 4) Use dev->name from flowtable to fix a memleak, from Florian. 5) Oneliner to free flowtable object on removal, from Florian. 6) Memleak in chain rename transaction, again from Florian. 7) Don't allow two chains to use the same name in the same transaction, from Florian. 8) handle DCCP SYNC/SYNCACK as invalid, this triggers an uninitialized timer in conntrack reported by syzbot, from Florian. 9) Fix leak in case netlink_dump_start() fails, from Florian. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-24Merge tag 'mac80211-for-davem-2018-07-24' of ↵David S. Miller5-47/+32
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Only a few fixes: * always keep regulatory user hint * add missing break statement in station flags parsing * fix non-linear SKBs in port-control-over-nl80211 * reconfigure VLAN stations during HW restart ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-24cfg80211: never ignore user regulatory hintAmar Singhal1-25/+3
Currently user regulatory hint is ignored if all wiphys in the system are self managed. But the hint is not ignored if there is no wiphy in the system. This affects the global regulatory setting. Global regulatory setting needs to be maintained so that it can be applied to a new wiphy entering the system. Therefore, do not ignore user regulatory setting even if all wiphys in the system are self managed. Signed-off-by: Amar Singhal <asinghal@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-07-24sock: fix sg page frag coalescing in sk_alloc_sgDaniel Borkmann1-3/+3
Current sg coalescing logic in sk_alloc_sg() (latter is used by tls and sockmap) is not quite correct in that we do fetch the previous sg entry, however the subsequent check whether the refilled page frag from the socket is still the same as from the last entry with prior offset and length matching the start of the current buffer is comparing always the first sg list entry instead of the prior one. Fixes: 3c4d7559159b ("tls: kernel TLS support") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Dave Watson <davejwatson@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-24netfilter: nf_tables: move dumper state allocation into ->startFlorian Westphal1-104/+115
Shaochun Chen points out we leak dumper filter state allocations stored in dump_control->data in case there is an error before netlink sets cb_running (after which ->done will be called at some point). In order to fix this, add .start functions and do the allocations there. ->done is going to clean up, and in case error occurs before ->start invocation no cleanups need to be done anymore. Reported-by: shaochun chen <cscnull@gmail.com> Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-07-23tcp: add tcp_ooo_try_coalesce() helperEric Dumazet1-4/+21
In case skb in out_or_order_queue is the result of multiple skbs coalescing, we would like to get a proper gso_segs counter tracking, so that future tcp_drop() can report an accurate number. I chose to not implement this tracking for skbs in receive queue, since they are not dropped, unless socket is disconnected. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-23tcp: call tcp_drop() from tcp_data_queue_ofo()Eric Dumazet1-2/+2
In order to be able to give better diagnostics and detect malicious traffic, we need to have better sk->sk_drops tracking. Fixes: 9f5afeae5152 ("tcp: use an RB tree for ooo receive queue") Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>