summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)AuthorFilesLines
2012-06-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds4-9/+19
Pull networking updates from David Miller: 1) Make syn floods consume significantly less resources by a) Not pre-COW'ing routing metrics for SYN/ACKs b) Mirroring the device queue mapping of the SYN for the SYN/ACK reply. Both from Eric Dumazet. 2) Fix calculation errors in Byte Queue Limiting, from Hiroaki SHIMODA. 3) Validate the length requested when building a paged SKB for a socket, so we don't overrun the page vector accidently. From Jason Wang. 4) When netlabel is disabled, we abort all IP option processing when we see a CIPSO option. This isn't the right thing to do, we should simply skip over it and continue processing the remaining options (if any). Fix from Paul Moore. 5) SRIOV fixes for the mellanox driver from Jack orgenstein and Marcel Apfelbaum. 6) 8139cp enables the receiver before the ring address is properly programmed, which potentially lets the device crap over random memory. Fix from Jason Wang. 7) e1000/e1000e fixes for i217 RST handling, and an improper buffer address reference in jumbo RX frame processing from Bruce Allan and Sebastian Andrzej Siewior, respectively. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: fec_mpc52xx: fix timestamp filtering mcs7830: Implement link state detection e1000e: fix Rapid Start Technology support for i217 e1000: look into the page instead of skb->data for e1000_tbi_adjust_stats() r8169: call netif_napi_del at errpaths and at driver unload tcp: reflect SYN queue_mapping into SYNACK packets tcp: do not create inetpeer on SYNACK message 8139cp/8139too: terminate the eeprom access with the right opmode 8139cp: set ring address before enabling receiver cipso: handle CIPSO options correctly when NetLabel is disabled net: sock: validate data_len before allocating skb in sock_alloc_send_pskb() bql: Avoid possible inconsistent calculation. bql: Avoid unneeded limit decrement. bql: Fix POSDIFF() to integer overflow aware. net/mlx4_core: Fix obscure mlx4_cmd_box parameter in QUERY_DEV_CAP net/mlx4_core: Check port out-of-range before using in mlx4_slave_cap net/mlx4_core: Fixes for VF / Guest startup flow net/mlx4_en: Fix improper use of "port" parameter in mlx4_en_event net/mlx4_core: Fix number of EQs used in ICM initialisation net/mlx4_core: Fix the slave_id out-of-range test in mlx4_eq_int
2012-06-03tty: Revert the tty locking series, it needs more workLinus Torvalds1-2/+2
This reverts the tty layer change to use per-tty locking, because it's not correct yet, and fixing it will require some more deep surgery. The main revert is d29f3ef39be4 ("tty_lock: Localise the lock"), but there are several smaller commits that built upon it, they also get reverted here. The list of reverted commits is: fde86d310886 - tty: add lockdep annotations 8f6576ad476b - tty: fix ldisc lock inversion trace d3ca8b64b97e - pty: Fix lock inversion b1d679afd766 - tty: drop the pty lock during hangup abcefe5fc357 - tty/amiserial: Add missing argument for tty_unlock() fd11b42e3598 - cris: fix missing tty arg in wait_event_interruptible_tty call d29f3ef39be4 - tty_lock: Localise the lock The revert had a trivial conflict in the 68360serial.c staging driver that got removed in the meantime. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-01tcp: reflect SYN queue_mapping into SYNACK packetsEric Dumazet2-6/+12
While testing how linux behaves on SYNFLOOD attack on multiqueue device (ixgbe), I found that SYNACK messages were dropped at Qdisc level because we send them all on a single queue. Obvious choice is to reflect incoming SYN packet @queue_mapping to SYNACK packet. Under stress, my machine could only send 25.000 SYNACK per second (for 200.000 incoming SYN per second). NIC : ixgbe with 16 rx/tx queues. After patch, not a single SYNACK is dropped. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Hans Schillstrom <hans.schillstrom@ericsson.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-01tcp: do not create inetpeer on SYNACK messageEric Dumazet1-1/+2
Another problem on SYNFLOOD/DDOS attack is the inetpeer cache getting larger and larger, using lots of memory and cpu time. tcp_v4_send_synack() ->inet_csk_route_req() ->ip_route_output_flow() ->rt_set_nexthop() ->rt_init_metrics() ->inet_getpeer( create = true) This is a side effect of commit a4daad6b09230 (net: Pre-COW metrics for TCP) added in 2.6.39 Possible solution : Instruct inet_csk_route_req() to remove FLOWI_FLAG_PRECOW_METRICS Before patch : # grep peer /proc/slabinfo inet_peer_cache 4175430 4175430 192 42 2 : tunables 0 0 0 : slabdata 99415 99415 0 Samples: 41K of event 'cycles', Event count (approx.): 30716565122 + 20,24% ksoftirqd/0 [kernel.kallsyms] [k] inet_getpeer + 8,19% ksoftirqd/0 [kernel.kallsyms] [k] peer_avl_rebalance.isra.1 + 4,81% ksoftirqd/0 [kernel.kallsyms] [k] sha_transform + 3,64% ksoftirqd/0 [kernel.kallsyms] [k] fib_table_lookup + 2,36% ksoftirqd/0 [ixgbe] [k] ixgbe_poll + 2,16% ksoftirqd/0 [kernel.kallsyms] [k] __ip_route_output_key + 2,11% ksoftirqd/0 [kernel.kallsyms] [k] kernel_map_pages + 2,11% ksoftirqd/0 [kernel.kallsyms] [k] ip_route_input_common + 2,01% ksoftirqd/0 [kernel.kallsyms] [k] __inet_lookup_established + 1,83% ksoftirqd/0 [kernel.kallsyms] [k] md5_transform + 1,75% ksoftirqd/0 [kernel.kallsyms] [k] check_leaf.isra.9 + 1,49% ksoftirqd/0 [kernel.kallsyms] [k] ipt_do_table + 1,46% ksoftirqd/0 [kernel.kallsyms] [k] hrtimer_interrupt + 1,45% ksoftirqd/0 [kernel.kallsyms] [k] kmem_cache_alloc + 1,29% ksoftirqd/0 [kernel.kallsyms] [k] inet_csk_search_req + 1,29% ksoftirqd/0 [kernel.kallsyms] [k] __netif_receive_skb + 1,16% ksoftirqd/0 [kernel.kallsyms] [k] copy_user_generic_string + 1,15% ksoftirqd/0 [kernel.kallsyms] [k] kmem_cache_free + 1,02% ksoftirqd/0 [kernel.kallsyms] [k] tcp_make_synack + 0,93% ksoftirqd/0 [kernel.kallsyms] [k] _raw_spin_lock_bh + 0,87% ksoftirqd/0 [kernel.kallsyms] [k] __call_rcu + 0,84% ksoftirqd/0 [kernel.kallsyms] [k] rt_garbage_collect + 0,84% ksoftirqd/0 [kernel.kallsyms] [k] fib_rules_lookup Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Hans Schillstrom <hans.schillstrom@ericsson.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-01Merge branch 'for-linus' of ↵Linus Torvalds1-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs changes from Al Viro. "A lot of misc stuff. The obvious groups: * Miklos' atomic_open series; kills the damn abuse of ->d_revalidate() by NFS, which was the major stumbling block for all work in that area. * ripping security_file_mmap() and dealing with deadlocks in the area; sanitizing the neighborhood of vm_mmap()/vm_munmap() in general. * ->encode_fh() switched to saner API; insane fake dentry in mm/cleancache.c gone. * assorted annotations in fs (endianness, __user) * parts of Artem's ->s_dirty work (jff2 and reiserfs parts) * ->update_time() work from Josef. * other bits and pieces all over the place. Normally it would've been in two or three pull requests, but signal.git stuff had eaten a lot of time during this cycle ;-/" Fix up trivial conflicts in Documentation/filesystems/vfs.txt (the 'truncate_range' inode method was removed by the VM changes, the VFS update adds an 'update_time()' method), and in fs/btrfs/ulist.[ch] (due to sparse fix added twice, with other changes nearby). * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (95 commits) nfs: don't open in ->d_revalidate vfs: retry last component if opening stale dentry vfs: nameidata_to_filp(): don't throw away file on error vfs: nameidata_to_filp(): inline __dentry_open() vfs: do_dentry_open(): don't put filp vfs: split __dentry_open() vfs: do_last() common post lookup vfs: do_last(): add audit_inode before open vfs: do_last(): only return EISDIR for O_CREAT vfs: do_last(): check LOOKUP_DIRECTORY vfs: do_last(): make ENOENT exit RCU safe vfs: make follow_link check RCU safe vfs: do_last(): use inode variable vfs: do_last(): inline walk_component() vfs: do_last(): make exit RCU safe vfs: split do_lookup() Btrfs: move over to use ->update_time fs: introduce inode operation ->update_time reiserfs: get rid of resierfs_sync_super reiserfs: mark the superblock as dirty a bit later ...
2012-06-01Merge branch 'for-3.5' of git://linux-nfs.org/~bfields/linuxLinus Torvalds6-58/+75
Pull the rest of the nfsd commits from Bruce Fields: "... and then I cherry-picked the remainder of the patches from the head of my previous branch" This is the rest of the original nfsd branch, rebased without the delegation stuff that I thought really needed to be redone. I don't like rebasing things like this in general, but in this situation this was the lesser of two evils. * 'for-3.5' of git://linux-nfs.org/~bfields/linux: (50 commits) nfsd4: fix, consolidate client_has_state nfsd4: don't remove rebooted client record until confirmation nfsd4: remove some dprintk's and a comment nfsd4: return "real" sequence id in confirmed case nfsd4: fix exchange_id to return confirm flag nfsd4: clarify that renewing expired client is a bug nfsd4: simpler ordering of setclientid_confirm checks nfsd4: setclientid: remove pointless assignment nfsd4: fix error return in non-matching-creds case nfsd4: fix setclientid_confirm same_cred check nfsd4: merge 3 setclientid cases to 2 nfsd4: pull out common code from setclientid cases nfsd4: merge last two setclientid cases nfsd4: setclientid/confirm comment cleanup nfsd4: setclientid remove unnecessary terms from a logical expression nfsd4: move rq_flavor into svc_cred nfsd4: stricter cred comparison for setclientid/exchange_id nfsd4: move principal name into svc_cred nfsd4: allow removing clients not holding state nfsd4: rearrange exchange_id logic to simplify ...
2012-06-01sch_atm.c: get rid of poinless externAl Viro1-2/+0
sockfd_lookup() is declared in linux/net.h, which is pulled by linux/skbuff.h (and needed for a lot of other stuff in sch_atm.c anyway). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01Merge branch 'for-3.5-take-2' of git://linux-nfs.org/~bfields/linuxLinus Torvalds2-45/+68
Pull nfsd update from Bruce Fields. * 'for-3.5-take-2' of git://linux-nfs.org/~bfields/linux: (23 commits) nfsd: trivial: use SEEK_SET instead of 0 in vfs_llseek SUNRPC: split upcall function to extract reusable parts nfsd: allocate id-to-name and name-to-id caches in per-net operations. nfsd: make name-to-id cache allocated per network namespace context nfsd: make id-to-name cache allocated per network namespace context nfsd: pass network context to idmap init/exit functions nfsd: allocate export and expkey caches in per-net operations. nfsd: make expkey cache allocated per network namespace context nfsd: make export cache allocated per network namespace context nfsd: pass pointer to export cache down to stack wherever possible. nfsd: pass network context to export caches init/shutdown routines Lockd: pass network namespace to creation and destruction routines NFSd: remove hard-coded dereferences to name-to-id and id-to-name caches nfsd: pass pointer to expkey cache down to stack wherever possible. nfsd: use hash table from cache detail in nfsd export seq ops nfsd: pass svc_export_cache pointer as private data to "exports" seq file ops nfsd: use exp_put() for svc_export_cache put nfsd: use cache detail pointer from svc_export structure on cache put nfsd: add link to owner cache detail to svc_export structure nfsd: use passed cache_detail pointer expkey_parse() ...
2012-06-01nfsd4: move rq_flavor into svc_credJ. Bruce Fields2-3/+3
Move the rq_flavor into struct svc_cred, and use it in setclientid and exchange_id comparisons as well. Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-06-01nfsd4: move principal name into svc_credJ. Bruce Fields2-19/+8
Instead of keeping the principal name associated with a request in a structure that's private to auth_gss and using an accessor function, move it to svc_cred. Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-06-01svcrpc: fix a comment typoJ. Bruce Fields1-1/+1
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-06-01sunrpc: do array overrun check in svc_recv before allocating pagesJeff Layton1-1/+1
There's little point in waiting until after we allocate all of the pages to see if we're going to overrun the array. In the event that this calculation is really off we could end up scribbling over a bunch of memory and make it tougher to debug. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-06-01SUNRPC: move per-net operations from svc_destroy()Stanislav Kinsbursky1-4/+0
The idea is to separate service destruction and per-net operations, because these are two different things and the mix looks ugly. Notes: 1) For NFS server this patch looks ugly (sorry for that). But these place will be rewritten soon during NFSd containerization. 2) LockD per-net counter increase int lockd_up() was moved prior to make_socks() to make lockd_down_net() call safe in case of error. Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-06-01SUNRPC: new svc_bind() routine introducedStanislav Kinsbursky2-14/+17
This new routine is responsible for service registration in a specified network context. The idea is to separate service creation from per-net operations. Note also: since registering service with svc_bind() can fail, the service will be destroyed and during destruction it will try to unregister itself from rpcbind. In this case unregistration has to be skipped. Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-06-01rpc: handle rotated gss data for Windows interoperabilityJ. Bruce Fields1-16/+45
The data in Kerberos gss tokens can be rotated. But we were lazy and rejected any nonzero rotation value. It wasn't necessary for the implementations we were testing against at the time. But it appears that Windows does use a nonzero value here. So, implement rotation to bring ourselves into compliance with the spec and to interoperate with Windows. Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-06-01net: sock: validate data_len before allocating skb in sock_alloc_send_pskb()Jason Wang1-2/+5
We need to validate the number of pages consumed by data_len, otherwise frags array could be overflowed by userspace. So this patch validate data_len and return -EMSGSIZE when data_len may occupies more frags than MAX_SKB_FRAGS. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds14-61/+122
Pull networking changes from David S. Miller: 1) Fix IPSEC header length calculation for transport mode in ESP. The issue is whether to do the calculation before or after alignment. Fix from Benjamin Poirier. 2) Fix regression in IPV6 IPSEC fragment length calculations, from Gao Feng. This is another transport vs tunnel mode issue. 3) Handle AF_UNSPEC connect()s properly in L2TP to avoid OOPSes. Fix from James Chapman. 4) Fix USB ASIX driver's reception of full sized VLAN packets, from Eric Dumazet. 5) Allow drop monitor (and, more generically, all generic netlink protocols) to be automatically loaded as a module. From Neil Horman. Fix up trivial conflict in Documentation/feature-removal-schedule.txt due to new entries added next to each other at the end. As usual. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (38 commits) net/smsc911x: Repair broken failure paths virtio-net: remove useless disable on freeze netdevice: Update netif_dbg for CONFIG_DYNAMIC_DEBUG drop_monitor: Add module alias to enable automatic module loading genetlink: Build a generic netlink family module alias net: add MODULE_ALIAS_NET_PF_PROTO_NAME r6040: Do a Proper deinit at errorpath and also when driver unloads (calling r6040_remove_one) r6040: disable pci device if the subsequent calls (after pci_enable_device) fails skb: avoid unnecessary reallocations in __skb_cow net: sh_eth: fix the rxdesc pointer when rx descriptor empty happens asix: allow full size 8021Q frames to be received rds_rdma: don't assume infiniband device is PCI l2tp: fix oops in L2TP IP sockets for connect() AF_UNSPEC case mac80211: fix ADDBA declined after suspend with wowlan wlcore: fix undefined symbols when CONFIG_PM is not defined mac80211: fix flag check for QoS NOACK frames ath9k_hw: apply internal regulator settings on AR933x ath9k_hw: update AR933x initvals to fix issues with high power devices ath9k: fix a use-after-free-bug when ath_tx_setup_buffer() fails ath9k: stop rx dma before stopping tx ...
2012-05-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-clientLinus Torvalds7-276/+235
Pull ceph updates from Sage Weil: "There are some updates and cleanups to the CRUSH placement code, a bug fix with incremental maps, several cleanups and fixes from Josh Durgin in the RBD block device code, a series of cleanups and bug fixes from Alex Elder in the messenger code, and some miscellaneous bounds checking and gfp cleanups/fixes." Fix up trivial conflicts in net/ceph/{messenger.c,osdmap.c} due to the networking people preferring "unsigned int" over just "unsigned". * git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (45 commits) libceph: fix pg_temp updates libceph: avoid unregistering osd request when not registered ceph: add auth buf in prepare_write_connect() ceph: rename prepare_connect_authorizer() ceph: return pointer from prepare_connect_authorizer() ceph: use info returned by get_authorizer ceph: have get_authorizer methods return pointers ceph: ensure auth ops are defined before use ceph: messenger: reduce args to create_authorizer ceph: define ceph_auth_handshake type ceph: messenger: check return from get_authorizer ceph: messenger: rework prepare_connect_authorizer() ceph: messenger: check prepare_write_connect() result ceph: don't set WRITE_PENDING too early ceph: drop msgr argument from prepare_write_connect() ceph: messenger: send banner in process_connect() ceph: messenger: reset connection kvec caller libceph: don't reset kvec in prepare_write_banner() ceph: ignore preferred_osd field ceph: fully initialize new layout ...
2012-05-30Merge branch 'master' of ↵John W. Linville3-8/+9
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2012-05-30drop_monitor: Add module alias to enable automatic module loadingNeil Horman1-0/+1
Now that we have module alias macros for generic netlink families, lets use those to mark modules with the appropriate family names for loading Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Eric Dumazet <eric.dumazet@gmail.com> CC: David Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-30genetlink: Build a generic netlink family module aliasNeil Horman2-3/+2
Generic netlink searches for -type- formatted aliases when requesting a module to fulfill a protocol request (i.e. net-pf-16-proto-16-type-<x>, where x is a type value). However generic netlink protocols have no well defined type numbers, they have string names. Modify genl_ctrl_getfamily to request an alias in the format net-pf-16-proto-16-family-<x> instead, where x is a generic string, and add a macro that builds on the previously added MODULE_ALIAS_NET_PF_PROTO_NAME macro to allow modules to specifify those generic strings. Note, l2tp previously hacked together an net-pf-16-proto-16-type-l2tp alias using the MODULE_ALIAS macro, with these updates we can convert that to use the PROTO_NAME macro. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Eric Dumazet <eric.dumazet@gmail.com> CC: James Chapman <jchapman@katalix.com> CC: David Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-30memcg: decrement static keys at real destroy timeGlauber Costa1-7/+27
We call the destroy function when a cgroup starts to be removed, such as by a rmdir event. However, because of our reference counters, some objects are still inflight. Right now, we are decrementing the static_keys at destroy() time, meaning that if we get rid of the last static_key reference, some objects will still have charges, but the code to properly uncharge them won't be run. This becomes a problem specially if it is ever enabled again, because now new charges will be added to the staled charges making keeping it pretty much impossible. We just need to be careful with the static branch activation: since there is no particular preferred order of their activation, we need to make sure that we only start using it after all call sites are active. This is achieved by having a per-memcg flag that is only updated after static_key_slow_inc() returns. At this time, we are sure all sites are active. This is made per-memcg, not global, for a reason: it also has the effect of making socket accounting more consistent. The first memcg to be limited will trigger static_key() activation, therefore, accounting. But all the others will then be accounted no matter what. After this patch, only limited memcgs will have its sockets accounted. [akpm@linux-foundation.org: move enum sock_flag_bits into sock.h, document enum sock_flag_bits, convert memcg_proto_active() and memcg_proto_activated() to test_bit(), redo tcp_update_limit() comment to 80 cols] Signed-off-by: Glauber Costa <glommer@parallels.com> Cc: Tejun Heo <tj@kernel.org> Cc: Li Zefan <lizefan@huawei.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Acked-by: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-30rds_rdma: don't assume infiniband device is PCIThadeu Lima de Souza Cascardo1-2/+1
RDS code assumes that the struct ib_device dma_device member, which is a pointer, points to a struct device embedded in a struct pci_dev. This is not the case for ehca, for example, which is a OF driver, and makes dma_device point to a struct device embedded in a struct platform_device. This will make the system crash when rds_rdma is loaded in a system with ehca, since it will try to access the bus member of a non-existent struct pci_dev. The only reason rds_rdma uses the struct pci_dev is to get the NUMA node the device is attached to. Using dev_to_node for that is much better, since it won't assume which bus the infiniband is attached to. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Cc: dledford@redhat.com Cc: Jes.Sorensen@redhat.com Cc: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com> Acked-by: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-30l2tp: fix oops in L2TP IP sockets for connect() AF_UNSPEC caseJames Chapman2-3/+39
An application may call connect() to disconnect a socket using an address with family AF_UNSPEC. The L2TP IP sockets were not handling this case when the socket is not bound and an attempt to connect() using AF_UNSPEC in such cases would result in an oops. This patch addresses the problem by protecting the sk_prot->disconnect() call against trying to unhash the socket before it is bound. The L2TP IPv4 and IPv6 sockets have the same problem. Both are fixed by this patch. The patch also adds more checks that the sockaddr supplied to bind() and connect() calls is valid. RIP: 0010:[<ffffffff82e133b0>] [<ffffffff82e133b0>] inet_unhash+0x50/0xd0 RSP: 0018:ffff88001989be28 EFLAGS: 00010293 Stack: ffff8800407a8000 0000000000000000 ffff88001989be78 ffffffff82e3a249 ffffffff82e3a050 ffff88001989bec8 ffff88001989be88 ffff8800407a8000 0000000000000010 ffff88001989bec8 ffff88001989bea8 ffffffff82e42639 Call Trace: [<ffffffff82e3a249>] udp_disconnect+0x1f9/0x290 [<ffffffff82e42639>] inet_dgram_connect+0x29/0x80 [<ffffffff82d012fc>] sys_connect+0x9c/0x100 Reported-by: Sasha Levin <levinsasha928@gmail.com> Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-29mac80211: fix ADDBA declined after suspend with wowlanEyal Shapira1-6/+6
WLAN_STA_BLOCK_BA is set while suspending but doesn't get cleared when resuming in case of wowlan. This causes further ADDBA requests received to be rejected. Fix it by clearing it in the wowlan path as well. Signed-off-by: Eyal Shapira <eyal@wizery.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Cc: stable@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-29mac80211: fix flag check for QoS NOACK framesClaudio Pisa1-1/+1
Signed-off-by: Claudio Pisa <claudio.pisa@uniroma2.it> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-29Merge tag 'nfs-for-3.5-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds4-9/+12
Pull NFS client updates from Trond Myklebust: "New features include: - Rewrite the O_DIRECT code so that it can share the same coalescing and pNFS functionality as the page cache code. - Allow the server to provide hints as to when we should use pNFS, and when it is more efficient to read and write through the metadata server. - NFS cache consistency updates: * Use the ctime to emulate a change attribute for NFSv2/v3 so that all NFS versions can share the same cache management code. * New cache management code will only look at the change attribute and size attribute when deciding whether or not our cached data is still valid or not. * Don't request NFSv4 post-op attributes on writes in cases such as O_DIRECT, where we don't care about data cache consistency, or when we have a write delegation, and know that our cache is still consistent. * Don't request NFSv4 post-op attributes on operations such as COMMIT, where there are no expected metadata updates. * Don't request NFSv4 directory post-op attributes in cases where the operations themselves already return change attribute updates: i.e. operations such as OPEN, CREATE, REMOVE, LINK and RENAME. - Speed up 'ls' and friends by using READDIR rather than READDIRPLUS if we detect no attempts to lookup filenames. - Improve the code sharing between NFSv2/v3 and v4 mounts - NFSv4.1 state management efficiency improvements - More patches in preparation for NFSv4/v4.1 migration functionality." Fix trivial conflict in fs/nfs/nfs4proc.c that was due to the dcache qstr name initialization changes (that made the length/hash a 64-bit union) * tag 'nfs-for-3.5-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (146 commits) NFSv4: Add debugging printks to state manager NFSv4: Map NFS4ERR_SHARE_DENIED into an EACCES error instead of EIO NFSv4: update_changeattr does not need to set NFS_INO_REVAL_PAGECACHE NFSv4.1: nfs4_reset_session should use nfs4_handle_reclaim_lease_error NFSv4.1: Handle other occurrences of NFS4ERR_CONN_NOT_BOUND_TO_SESSION NFSv4.1: Handle NFS4ERR_CONN_NOT_BOUND_TO_SESSION in the state manager NFSv4.1: Handle errors in nfs4_bind_conn_to_session NFSv4.1: nfs4_bind_conn_to_session should drain the session NFSv4.1: Don't clobber the seqid if exchange_id returns a confirmed clientid NFSv4.1: Add DESTROY_CLIENTID NFSv4.1: Ensure we use the correct credentials for bind_conn_to_session NFSv4.1: Ensure we use the correct credentials for session create/destroy NFSv4.1: Move NFSPROC4_CLNT_BIND_CONN_TO_SESSION to the end of the operations NFSv4.1: Handle NFS4ERR_SEQ_MISORDERED when confirming the lease NFSv4: When purging the lease, we must clear NFS4CLNT_LEASE_CONFIRM NFSv4: Clean up the error handling for nfs4_reclaim_lease NFSv4.1: Exchange ID must use GFP_NOFS allocation mode nfs41: Use BIND_CONN_TO_SESSION for CB_PATH_DOWN* nfs4.1: add BIND_CONN_TO_SESSION operation NFSv4.1 test the mdsthreshold hint parameters ...
2012-05-27ipv6: fix incorrect ipsec fragmentGao feng2-18/+53
Since commit ad0081e43a "ipv6: Fragment locally generated tunnel-mode IPSec6 packets as needed" the fragment of packets is incorrect. because tunnel mode needs IPsec headers and trailer for all fragments, while on transport mode it is sufficient to add the headers to the first fragment and the trailer to the last. so modify mtu and maxfraglen base on ipsec mode and if fragment is first or last. with my test,it work well(every fragment's size is the mtu) and does not trigger slow fragment path. Changes from v1: though optimization, mtu_prev and maxfraglen_prev can be delete. replace xfrm mode codes with dst_entry's new frag DST_XFRM_TUNNEL. add fuction ip6_append_data_mtu to make codes clearer. Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-27xfrm: take net hdr len into account for esp payload size calculationBenjamin Poirier2-26/+16
Corrects the function that determines the esp payload size. The calculations done in esp{4,6}_get_mtu() lead to overlength frames in transport mode for certain mtu values and suboptimal frames for others. According to what is done, mainly in esp{,6}_output() and tcp_mtu_to_mss(), net_header_len must be taken into account before doing the alignment calculation. Signed-off-by: Benjamin Poirier <bpoirier@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-25mac80211: Fix race in checking AP status by sending null frameSoumik Das1-1/+2
mac80211 tries to verify the existence of the current AP by probing or sending a NULL frame in function ieee80211_mgd_probe_ap_send. It 1st sends a null frame to the AP, increments probe_send_count and waits for the ACK to the NULL frame for a finite duration of time. At times, it happens that by the time mac80211 gets to increment probe_send_count, the ACK for the NULL frame transmitted has already been processed. This leads to a race condition where mac80211 times out waiting for the ACK for the NULL frame causing unnecessary disconnection with the AP. Signed-off-by: Soumik Das <soumik.das@stericsson.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-25net/wanrouter: Deprecate and schedule for removalJoe Perches1-1/+1
No one uses this on current kernels anymore. Let it be known it's going to be removed eventually. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds46-855/+1350
Pull more networking updates from David Miller: "Ok, everything from here on out will be bug fixes." 1) One final sync of wireless and bluetooth stuff from John Linville. These changes have all been in his tree for more than a week, and therefore have had the necessary -next exposure. John was just away on a trip and didn't have a change to send the pull request until a day or two ago. 2) Put back some defines in user exposed header file areas that were removed during the tokenring purge. From Stephen Hemminger and Paul Gortmaker. 3) A bug fix for UDP hash table allocation got lost in the pile due to one of those "you got it.. no I've got it.." situations. :-) From Tim Bird. 4) SKB coalescing in TCP needs to have stricter checks, otherwise we'll try to coalesce overlapping frags and crash. Fix from Eric Dumazet. 5) RCU routing table lookups can race with free_fib_info(), causing crashes when we deref the device pointers in the route. Fix by releasing the net device in the RCU callback. From Yanmin Zhang. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (293 commits) tcp: take care of overlaps in tcp_try_coalesce() ipv4: fix the rcu race between free_fib_info and ip_route_output_slow mm: add a low limit to alloc_large_system_hash ipx: restore token ring define to include/linux/ipx.h if: restore token ring ARP type to header xen: do not disable netfront in dom0 phy/micrel: Fix ID of KSZ9021 mISDN: Add X-Tensions USB ISDN TA XC-525 gianfar:don't add FCB length to hard_header_len Bluetooth: Report proper error number in disconnection Bluetooth: Create flags for bt_sk() Bluetooth: report the right security level in getsockopt Bluetooth: Lock the L2CAP channel when sending Bluetooth: Restore locking semantics when looking up L2CAP channels Bluetooth: Fix a redundant and problematic incoming MTU check Bluetooth: Add support for Foxconn/Hon Hai AR5BBU22 0489:E03C Bluetooth: Fix EIR data generation for mgmt_device_found Bluetooth: Fix Inquiry with RSSI event mask Bluetooth: improve readability of l2cap_seq_list code Bluetooth: Fix skb length calculation ...
2012-05-24tcp: take care of overlaps in tcp_try_coalesce()Eric Dumazet1-0/+5
Sergio Correia reported following warning : WARNING: at net/ipv4/tcp.c:1301 tcp_cleanup_rbuf+0x4f/0x110() WARN(skb && !before(tp->copied_seq, TCP_SKB_CB(skb)->end_seq), "cleanup rbuf bug: copied %X seq %X rcvnxt %X\n", tp->copied_seq, TCP_SKB_CB(skb)->end_seq, tp->rcv_nxt); It appears TCP coalescing, and more specifically commit b081f85c297 (net: implement tcp coalescing in tcp_queue_rcv()) should take care of possible segment overlaps in receive queue. This was properly done in the case of out_or_order_queue by the caller. For example, segment at tail of queue have sequence 1000-2000, and we add a segment with sequence 1500-2500. This can happen in case of retransmits. In this case, just don't do the coalescing. Reported-by: Sergio Correia <lists@uece.net> Signed-off-by: Eric Dumazet <edumazet@google.com> Tested-by: Sergio Correia <lists@uece.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-24ipv4: fix the rcu race between free_fib_info and ip_route_output_slowYanmin Zhang1-6/+6
We hit a kernel OOPS. <3>[23898.789643] BUG: sleeping function called from invalid context at /data/buildbot/workdir/ics/hardware/intel/linux-2.6/arch/x86/mm/fault.c:1103 <3>[23898.862215] in_atomic(): 0, irqs_disabled(): 0, pid: 10526, name: Thread-6683 <4>[23898.967805] HSU serial 0000:00:05.1: 0000:00:05.2:HSU serial prevented me to suspend... <4>[23899.258526] Pid: 10526, comm: Thread-6683 Tainted: G W 3.0.8-137685-ge7742f9 #1 <4>[23899.357404] HSU serial 0000:00:05.1: 0000:00:05.2:HSU serial prevented me to suspend... <4>[23899.904225] Call Trace: <4>[23899.989209] [<c1227f50>] ? pgtable_bad+0x130/0x130 <4>[23900.000416] [<c1238c2a>] __might_sleep+0x10a/0x110 <4>[23900.007357] [<c1228021>] do_page_fault+0xd1/0x3c0 <4>[23900.013764] [<c18e9ba9>] ? restore_all+0xf/0xf <4>[23900.024024] [<c17c007b>] ? napi_complete+0x8b/0x690 <4>[23900.029297] [<c1227f50>] ? pgtable_bad+0x130/0x130 <4>[23900.123739] [<c1227f50>] ? pgtable_bad+0x130/0x130 <4>[23900.128955] [<c18ea0c3>] error_code+0x5f/0x64 <4>[23900.133466] [<c1227f50>] ? pgtable_bad+0x130/0x130 <4>[23900.138450] [<c17f6298>] ? __ip_route_output_key+0x698/0x7c0 <4>[23900.144312] [<c17f5f8d>] ? __ip_route_output_key+0x38d/0x7c0 <4>[23900.150730] [<c17f63df>] ip_route_output_flow+0x1f/0x60 <4>[23900.156261] [<c181de58>] ip4_datagram_connect+0x188/0x2b0 <4>[23900.161960] [<c18e981f>] ? _raw_spin_unlock_bh+0x1f/0x30 <4>[23900.167834] [<c18298d6>] inet_dgram_connect+0x36/0x80 <4>[23900.173224] [<c14f9e88>] ? _copy_from_user+0x48/0x140 <4>[23900.178817] [<c17ab9da>] sys_connect+0x9a/0xd0 <4>[23900.183538] [<c132e93c>] ? alloc_file+0xdc/0x240 <4>[23900.189111] [<c123925d>] ? sub_preempt_count+0x3d/0x50 Function free_fib_info resets nexthop_nh->nh_dev to NULL before releasing fi. Other cpu might be accessing fi. Fixing it by delaying the releasing. With the patch, we ran MTBF testing on Android mobile for 12 hours and didn't trigger the issue. Thank Eric for very detailed review/checking the issue. Signed-off-by: Yanmin Zhang <yanmin_zhang@linux.intel.com> Signed-off-by: Kun Jiang <kunx.jiang@intel.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-24mm: add a low limit to alloc_large_system_hashTim Bird3-20/+13
UDP stack needs a minimum hash size value for proper operation and also uses alloc_large_system_hash() for proper NUMA distribution of its hash tables and automatic sizing depending on available system memory. On some low memory situations, udp_table_init() must ignore the alloc_large_system_hash() result and reallocs a bigger memory area. As we cannot easily free old hash table, we leak it and kmemleak can issue a warning. This patch adds a low limit parameter to alloc_large_system_hash() to solve this problem. We then specify UDP_HTABLE_SIZE_MIN for UDP/UDPLite hash table allocation. Reported-by: Mark Asselstine <mark.asselstine@windriver.com> Reported-by: Tim Bird <tim.bird@am.sony.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-24Merge branch 'for-linus' of ↵Linus Torvalds6-16/+43
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull user namespace enhancements from Eric Biederman: "This is a course correction for the user namespace, so that we can reach an inexpensive, maintainable, and reasonably complete implementation. Highlights: - Config guards make it impossible to enable the user namespace and code that has not been converted to be user namespace safe. - Use of the new kuid_t type ensures the if you somehow get past the config guards the kernel will encounter type errors if you enable user namespaces and attempt to compile in code whose permission checks have not been updated to be user namespace safe. - All uids from child user namespaces are mapped into the initial user namespace before they are processed. Removing the need to add an additional check to see if the user namespace of the compared uids remains the same. - With the user namespaces compiled out the performance is as good or better than it is today. - For most operations absolutely nothing changes performance or operationally with the user namespace enabled. - The worst case performance I could come up with was timing 1 billion cache cold stat operations with the user namespace code enabled. This went from 156s to 164s on my laptop (or 156ns to 164ns per stat operation). - (uid_t)-1 and (gid_t)-1 are reserved as an internal error value. Most uid/gid setting system calls treat these value specially anyway so attempting to use -1 as a uid would likely cause entertaining failures in userspace. - If setuid is called with a uid that can not be mapped setuid fails. I have looked at sendmail, login, ssh and every other program I could think of that would call setuid and they all check for and handle the case where setuid fails. - If stat or a similar system call is called from a context in which we can not map a uid we lie and return overflowuid. The LFS experience suggests not lying and returning an error code might be better, but the historical precedent with uids is different and I can not think of anything that would break by lying about a uid we can't map. - Capabilities are localized to the current user namespace making it safe to give the initial user in a user namespace all capabilities. My git tree covers all of the modifications needed to convert the core kernel and enough changes to make a system bootable to runlevel 1." Fix up trivial conflicts due to nearby independent changes in fs/stat.c * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (46 commits) userns: Silence silly gcc warning. cred: use correct cred accessor with regards to rcu read lock userns: Convert the move_pages, and migrate_pages permission checks to use uid_eq userns: Convert cgroup permission checks to use uid_eq userns: Convert tmpfs to use kuid and kgid where appropriate userns: Convert sysfs to use kgid/kuid where appropriate userns: Convert sysctl permission checks to use kuid and kgids. userns: Convert proc to use kuid/kgid where appropriate userns: Convert ext4 to user kuid/kgid where appropriate userns: Convert ext3 to use kuid/kgid where appropriate userns: Convert ext2 to use kuid/kgid where appropriate. userns: Convert devpts to use kuid/kgid where appropriate userns: Convert binary formats to use kuid/kgid where appropriate userns: Add negative depends on entries to avoid building code that is userns unsafe userns: signal remove unnecessary map_cred_ns userns: Teach inode_capable to understand inodes whose uids map to other namespaces. userns: Fail exec for suid and sgid binaries with ids outside our user namespace. userns: Convert stat to return values mapped from kuids and kgids userns: Convert user specfied uids and gids in chown into kuids and kgid userns: Use uid_eq gid_eq helpers when comparing kuids and kgids in the vfs ...
2012-05-23Merge branch 'for-linus' of ↵Linus Torvalds2-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial updates from Jiri Kosina: "As usual, it's mostly typo fixes, redundant code elimination and some documentation updates." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (57 commits) edac, mips: don't change code that has been removed in edac/mips tree xtensa: Change mail addresses of Hannes Weiner and Oskar Schirmer lib: Change mail address of Oskar Schirmer net: Change mail address of Oskar Schirmer arm/m68k: Change mail address of Sebastian Hess i2c: Change mail address of Oskar Schirmer net: Fix tcp_build_and_update_options comment in struct tcp_sock atomic64_32.h: fix parameter naming mismatch Kconfig: replace "--- help ---" with "---help---" c2port: fix bogus Kconfig "default no" edac: Fix spelling errors. qla1280: Remove redundant NULL check before release_firmware() call remoteproc: remove redundant NULL check before release_firmware() qla2xxx: Remove redundant NULL check before release_firmware() call. aic94xx: Get rid of redundant NULL check before release_firmware() call tehuti: delete redundant NULL check before release_firmware() qlogic: get rid of a redundant test for NULL before call to release_firmware() bna: remove redundant NULL test before release_firmware() tg3: remove redundant NULL test before release_firmware() call typhoon: get rid of redundant conditional before all to release_firmware() ...
2012-05-23Merge branch 'for-linus' of ↵Linus Torvalds1-26/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID subsystem updates from Jiri Kosina: "Apart from various driver updates and added support for a number of new devices (mostly multitouch ones, but not limited to), there is one change that is worth pointing out explicitly: creation of HID device groups and proper autoloading of hid-multitouch, implemented by Henrik Rydberg." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (50 commits) HID: wacom: fix build breakage without CONFIG_LEDS_CLASS HID: waltop: Extend barrel button fix HID: hyperv: Set the hid drvdata correctly HID: wacom: Unify speed setting HID: wacom: Add speed setting for Intuos4 WL HID: wacom: Move Graphire raport header check. HID: uclogic: Add support for UC-Logic TWHL850 HID: explain the signed/unsigned handling in hid_add_field() HID: handle logical min/max signedness properly in parser HID: logitech: read all 32 bits of report type bitfield HID: wacom: Add LED selector control for Wacom Intuos4 WL HID: hid-multitouch: fix wrong protocol detection HID: wiimote: Fix IR data parser HID: wacom: Add tilt reporting for Intuos4 WL HID: multitouch: MT interface matching for Baanto HID: hid-multitouch: Only match MT interfaces HID: Create a common generic driver HID: hid-multitouch: Switch to device groups HID: Create a generic device group HID: Allow bus wildcard matching ...
2012-05-23Merge branch 'for-3.5' of ↵Linus Torvalds4-83/+65
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup updates from Tejun Heo: "cgroup file type addition / removal is updated so that file types are added and removed instead of individual files so that dynamic file type addition / removal can be implemented by cgroup and used by controllers. blkio controller changes which will come through block tree are dependent on this. Other changes include res_counter cleanup and disallowing kthread / PF_THREAD_BOUND threads to be attached to non-root cgroups. There's a reported bug with the file type addition / removal handling which can lead to oops on cgroup umount. The issue is being looked into. It shouldn't cause problems for most setups and isn't a security concern." Fix up trivial conflict in Documentation/feature-removal-schedule.txt * 'for-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (21 commits) res_counter: Account max_usage when calling res_counter_charge_nofail() res_counter: Merge res_counter_charge and res_counter_charge_nofail cgroups: disallow attaching kthreadd or PF_THREAD_BOUND threads cgroup: remove cgroup_subsys->populate() cgroup: get rid of populate for memcg cgroup: pass struct mem_cgroup instead of struct cgroup to socket memcg cgroup: make css->refcnt clearing on cgroup removal optional cgroup: use negative bias on css->refcnt to block css_tryget() cgroup: implement cgroup_rm_cftypes() cgroup: introduce struct cfent cgroup: relocate __d_cgrp() and __d_cft() cgroup: remove cgroup_add_file[s]() cgroup: convert memcg controller to the new cftype interface memcg: always create memsw files if CONFIG_CGROUP_MEM_RES_CTLR_SWAP cgroup: convert all non-memcg controllers to the new cftype interface cgroup: relocate cftype and cgroup_subsys definitions in controllers cgroup: merge cft_release_agent cftype array into the base files array cgroup: implement cgroup_add_cftypes() and friends cgroup: build list of all cgroups under a given cgroupfs_root cgroup: move cgroup_clear_directory() call out of cgroup_populate_dir() ...
2012-05-23Merge branch 'for-3.5' of ↵Linus Torvalds2-8/+8
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu Pull percpu updates from Tejun Heo: "Contains Alex Shi's three patches to remove percpu_xxx() which overlap with this_cpu_xxx(). There shouldn't be any functional change." * 'for-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: percpu: remove percpu_xxx() functions x86: replace percpu_xxx funcs with this_cpu_xxx net: replace percpu_xxx funcs with this_cpu_xxx or __this_cpu_xxx
2012-05-23Merge tag 'tty-3.5-rc1' of ↵Linus Torvalds1-73/+64
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull TTY updates from Greg Kroah-Hartman: "Here's the big TTY/serial driver pull request for the 3.5-rc1 merge window. Nothing major in here, just lots of incremental changes from Alan and Jiri reworking some tty core things to behave better and to get a more solid grasp on some of the nasty tty locking issues. There are a few tty and serial driver updates in here as well. All of this has been in the linux-next releases for a while with no problems. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'tty-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (115 commits) serial: bfin_uart: Make MMR access compatible with 32 bits bf609 style controller. serial: bfin_uart: RTS and CTS MMRs can be either 16-bit width or 32-bit width. serial: bfin_uart: narrow the reboot condition in DMA tx interrupt serial: bfin_uart: Adapt bf5xx serial driver to bf60x serial4 controller. Revert "serial_core: Update buffer overrun statistics." tty: hvc_xen: NULL dereference on allocation failure tty: Fix LED error return tty: Allow uart_register/unregister/register tty: move global ldisc idle waitqueue to the individual ldisc serial8250-em: Add DT support serial8250-em: clk_get() IS_ERR() error handling fix serial_core: Update buffer overrun statistics. tty: drop the pty lock during hangup cris: fix missing tty arg in wait_event_interruptible_tty call tty/amiserial: Add missing argument for tty_unlock() tty_lock: Localise the lock pty: Lock the devpts bits privately tty_lock: undo the old tty_lock use on the ctty serial8250-em: Emma Mobile UART driver V2 Add missing call to uart_update_timeout() ...
2012-05-23Merge branch 'master' of ↵David S. Miller41-829/+1326
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John says: -------------------- I apologize for not having sent this sooner. FWIW, I was in a car somewhere between Illinois and North Carolina for most of the day Sunday and Monday... :-) This is (obviously) the last non-fix pull request for wireless bits intended for 3.5. It includes AP support for mwifiex, a variety of HCI and other updates for NFC, some brcmfmac and brcmsmac refactoring, a large batch of ssb and bcma updates, a batch of ath6kl updates, some cfg80211 and mac80211 updates/refactoring from Johannes Berg, a rather large collection of Bluetooth updates by way of Gustavo, and a variety of other bits here and there. -------------------- Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-nextJohn W. Linville41-829/+1326
2012-05-22libceph: fix pg_temp updatesSage Weil1-1/+5
Usually, we are adding pg_temp entries or removing them. Occasionally they update. In that case, osdmap_apply_incremental() was failing because the rbtree entry already exists. Fix by removing the existing entry before inserting a new one. Fixes http://tracker.newdream.net/issues/2446 Signed-off-by: Sage Weil <sage@inktank.com> Reviewed-by: Alex Elder <elder@inktank.com>
2012-05-22Merge branch 'next' of ↵Linus Torvalds4-13/+7
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull security subsystem updates from James Morris: "New notable features: - The seccomp work from Will Drewry - PR_{GET,SET}_NO_NEW_PRIVS from Andy Lutomirski - Longer security labels for Smack from Casey Schaufler - Additional ptrace restriction modes for Yama by Kees Cook" Fix up trivial context conflicts in arch/x86/Kconfig and include/linux/filter.h * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (65 commits) apparmor: fix long path failure due to disconnected path apparmor: fix profile lookup for unconfined ima: fix filename hint to reflect script interpreter name KEYS: Don't check for NULL key pointer in key_validate() Smack: allow for significantly longer Smack labels v4 gfp flags for security_inode_alloc()? Smack: recursive tramsmute Yama: replace capable() with ns_capable() TOMOYO: Accept manager programs which do not start with / . KEYS: Add invalidation support KEYS: Do LRU discard in full keyrings KEYS: Permit in-place link replacement in keyring list KEYS: Perform RCU synchronisation on keys prior to key destruction KEYS: Announce key type (un)registration KEYS: Reorganise keys Makefile KEYS: Move the key config into security/keys/Kconfig KEYS: Use the compat keyctl() syscall wrapper on Sparc64 for Sparc32 compat Yama: remove an unused variable samples/seccomp: fix dependencies on arch macros Yama: add additional ptrace scopes ...
2012-05-22Merge tag 'virtio-for-linus' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus Pull virtio updates from Rusty Russell. * tag 'virtio-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: virtio: fix typo in comment virtio-mmio: Devices parameter parsing virtio_blk: Drop unused request tracking list virtio-blk: Fix hot-unplug race in remove method virtio: Use ida to allocate virtio index virtio: balloon: separate out common code between remove and freeze functions virtio: balloon: drop restore_common() 9p: disconnect channel when PCI device is removed virtio: update documentation to v0.9.5 of spec
2012-05-229p: disconnect channel when PCI device is removedSasha Levin1-1/+2
When a virtio_9p pci device is being removed, we should close down any active channels and free up resources, we're not supposed to BUG() if there's still an open channel since it's a valid case when removing the PCI device. Otherwise, removing the PCI device with an open channel would cause the following BUG(): [ 1184.671416] ------------[ cut here ]------------ [ 1184.672057] kernel BUG at net/9p/trans_virtio.c:618! [ 1184.672057] invalid opcode: 0000 [#1] PREEMPT SMP [ 1184.672057] CPU 3 [ 1184.672057] Pid: 5, comm: kworker/u:0 Tainted: G W 3.4.0-rc2-next-20120413-sasha-dirty #76 [ 1184.672057] RIP: 0010:[<ffffffff825c9116>] [<ffffffff825c9116>] p9_virtio_remove+0x16/0x90 [ 1184.672057] RSP: 0018:ffff88000d653ac0 EFLAGS: 00010202 [ 1184.672057] RAX: ffffffff836bfb40 RBX: ffff88000c9b2148 RCX: ffff88000d658978 [ 1184.672057] RDX: 0000000000000006 RSI: 0000000000000000 RDI: ffff880028868000 [ 1184.672057] RBP: ffff88000d653ad0 R08: 0000000000000000 R09: 0000000000000000 [ 1184.672057] R10: 0000000000000000 R11: 0000000000000001 R12: ffff880028868000 [ 1184.672057] R13: ffffffff835aa7c0 R14: ffff880041630000 R15: ffff88000d653da0 [ 1184.672057] FS: 0000000000000000(0000) GS:ffff880035a00000(0000) knlGS:0000000000000000 [ 1184.672057] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 1184.672057] CR2: 0000000001181000 CR3: 000000000eba1000 CR4: 00000000000406e0 [ 1184.672057] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 x000000000117a190 *[ 1184.672057] DR3: 00000000000000** 00 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 1184.672057] Process kworker/u:0 (pid: 5, threadinfo ffff88000d652000, task ffff88000d658000) [ 1184.672057] Stack: [ 1184.672057] ffff880028868000 ffffffff836bfb40 ffff88000d653af0 ffffffff8193661b [ 1184.672057] ffff880028868008 ffffffff836bfb40 ffff88000d653b10 ffffffff81af1c81 [ 1184.672057] ffff880028868068 ffff880028868008 ffff88000d653b30 ffffffff81af257a [ 1184.795301] Call Trace: [ 1184.795301] [<ffffffff8193661b>] virtio_dev_remove+0x1b/0x60 [ 1184.795301] [<ffffffff81af1c81>] __device_release_driver+0x81/0xd0 [ 1184.795301] [<ffffffff81af257a>] device_release_driver+0x2a/0x40 [ 1184.795301] [<ffffffff81af0d48>] bus_remove_device+0x138/0x150 [ 1184.795301] [<ffffffff81aef08d>] device_del+0x14d/0x1b0 [ 1184.795301] [<ffffffff81aef138>] device_unregister+0x48/0x60 [ 1184.795301] [<ffffffff8193694d>] unregister_virtio_device+0xd/0x10 [ 1184.795301] [<ffffffff8265fc74>] virtio_pci_remove+0x2a/0x6c [ 1184.795301] [<ffffffff818a95ad>] pci_device_remove+0x4d/0x110 [ 1184.795301] [<ffffffff81af1c81>] __device_release_driver+0x81/0xd0 [ 1184.795301] [<ffffffff81af257a>] device_release_driver+0x2a/0x40 [ 1184.795301] [<ffffffff81af0d48>] bus_remove_device+0x138/0x150 [ 1184.795301] [<ffffffff81aef08d>] device_del+0x14d/0x1b0 [ 1184.795301] [<ffffffff81aef138>] device_unregister+0x48/0x60 [ 1184.795301] [<ffffffff818a36fa>] pci_stop_bus_device+0x6a/0x90 [ 1184.795301] [<ffffffff818a3791>] pci_stop_and_remove_bus_device+0x11/0x20 [ 1184.795301] [<ffffffff818c21d9>] remove_callback+0x9/0x10 [ 1184.795301] [<ffffffff81252d91>] sysfs_schedule_callback_work+0x21/0x60 [ 1184.795301] [<ffffffff810cb1a1>] process_one_work+0x281/0x430 [ 1184.795301] [<ffffffff810cb140>] ? process_one_work+0x220/0x430 [ 1184.795301] [<ffffffff81252d70>] ? sysfs_read_file+0x1c0/0x1c0 [ 1184.795301] [<ffffffff810cc613>] worker_thread+0x1f3/0x320 [ 1184.795301] [<ffffffff810cc420>] ? manage_workers.clone.13+0x130/0x130 [ 1184.795301] [<ffffffff810d30b2>] kthread+0xb2/0xc0 [ 1184.795301] [<ffffffff826783f4>] kernel_thread_helper+0x4/0x10 [ 1184.795301] [<ffffffff810deb18>] ? finish_task_switch+0x78/0xf0 [ 1184.795301] [<ffffffff82676574>] ? retint_restore_args+0x13/0x13 [ 1184.795301] [<ffffffff810d3000>] ? kthread_flush_work_fn+0x10/0x10 [ 1184.795301] [<ffffffff826783f0>] ? gs_change+0x13/0x13 [ 1184.795301] Code: c1 9e 0a 00 48 83 c4 08 5b c9 c3 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 41 54 49 89 fc 53 48 8b 9f a8 04 00 00 80 3b 00 74 0a <0f> 0b 0f 1f 84 00 00 00 00 00 48 8b 87 88 04 00 00 ff 50 30 31 [ 1184.795301] RIP [<ffffffff825c9116>] p9_virtio_remove+0x16/0x90 [ 1184.795301] RSP <ffff88000d653ac0> [ 1184.952618] ---[ end trace a307b3ed40206b4c ]--- Signed-off-by: Sasha Levin <levinsasha928@gmail.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-05-22Merge branch 'master' of git://git.infradead.org/users/eparis/selinux into nextJames Morris1-0/+1
Per pull request, for 3.5.
2012-05-21net: drop NET dependency from HAVE_BPF_JITSam Ravnborg1-3/+4
There is no point having the NET dependency on the select target, as it forces all users to depend on NET to tell they support BPF_JIT. Move the config option to the bottom of the file - this could be a nice place also for future "selectable" config symbols. Fix up all users to drop the dependency on NET now that it is not required to supress warnings for non-NET builds. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: David Miller <davem@davemloft.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds543-11997/+18656
Pull networking changes from David Miller: 1) Get rid of the error prone NLA_PUT*() macros that used an embedded goto. 2) Kill off the token-ring and MCA networking drivers, from Paul Gortmaker. 3) Reduce high-order allocations made by datagram AF_UNIX sockets, from Eric Dumazet. 4) Add PTP hardware clock support to IGB and IXGBE, from Richard Cochran and Jacob Keller. 5) Allow users to query timestamping capabilities of a card via ethtool, from Richard Cochran. 6) Add loadbalance mode to the teaming driver, from Jiri Pirko. Part of this is that we can now have BPF filters not attached to sockets, and the loadbalancing function is calculated using one. 7) Francois Romieu went through the network drivers removing gratuitous uses of netdev->base_addr, perhaps some day we can remove it completely but it's used for ISA probing still. 8) Add a BPF JIT for sparc. I know, who cares, right? :-) 9) Move networking sysctl registry away from using the compatability mode interfaces in the sysctl code. From Eric W Biederman. 10) Pavel Emelyanov added a way to save and restore TCP socket state via TCP_REPAIR, TCP_REPAIR_QUEUE, and TCP_QUEUE_SEQ socket options as well as a way to forcefully bind a socket to a port via the sk->sk_reuse value SK_FORCE_REUSE. There is also a TCP_REPAIR_OPTIONS which allows to reinstante the TCP options enabled on the connection. 11) Several enhancements from Eric Dumazet that, in particular, can enhance splice performance on TCP sockets significantly. a) Reset the offset of the per-socket sendmsg page when we know we're the only use of the page in linear_to_page(). b) Add facilities such that skb->data can be backed a page rather than SLAB kmalloc'd memory. In particular devices which were receiving into linear RX buffers can now end up providing paged data. The big result is that code like splice and GRO do not have to copy any more. 12) Allow a pure sender to more gracefully handle ACK backlogs in TCP. What can happen at high rates is that the sender hasn't grown his receive buffer limits at all (he's not receiving data so really doesn't need to), but the non-data ACKs consume receive buffer space. sk_add_backlog() is too aggressive in dropping frames in this case, so relax it's requirements by using the receive buffer plus the send buffer limit as the backlog limit instead of just the former. Also from Eric Dumazet. 13) Add ipv6 support to L2TP, from Benjamin LaHaise, James Chapman, and Chris Elston. 14) Implement TCP early retransmit (RFC 5827), from Yuchung Cheng. Basically, we can start fast retransmit before hiting the dupack threshold under certain conditions. 15) New CODEL active queue management packet scheduler, from Eric Dumazet based upon initial work by Dave Taht. Basically, the big feature is that packets are dropped (or ECN bits are set) based upon how long packets live in the queue, rather than the queue length (which is what RED uses). * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1341 commits) drivers/net/stmmac: seq_file fix memory leak ipv6/exthdrs: strict Pad1 and PadN check USB: qmi_wwan: Add ZTE (Vodafone) K3520-Z USB: qmi_wwan: Add ZTE (Vodafone) K3765-Z USB: qmi_wwan: Make forced int 4 whitelist generic net/ipv4: replace simple_strtoul with kstrtoul net/ipv4/ipconfig: neaten __setup placement net: qmi_wwan: Add Vodafone/Huawei K5005 support net: cdc_ether: Add ZTE WWAN matches before generic Ethernet ipv6: use skb coalescing in reassembly ipv4: use skb coalescing in defragmentation net: introduce skb_try_coalesce() net:ipv6:fixed space issues relating to operators. net:ipv6:fixed a trailing white space issue. ipv6: disable GSO on sockets hitting dst_allfrag tg3: use netdev_alloc_frag() API net: napi_frags_skb() is static ppp: avoid false drop_monitor false positives ipv6: bool/const conversions phase2 ipx: Remove spurious NULL checking in ipx_ioctl(). ...