summaryrefslogtreecommitdiff
path: root/samples
AgeCommit message (Collapse)AuthorFilesLines
2019-03-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds39-971/+2216
Pull networking updates from David Miller: "Here we go, another merge window full of networking and #ebpf changes: 1) Snoop DHCPACKS in batman-adv to learn MAC/IP pairs in the DHCP range without dealing with floods of ARP traffic, from Linus Lüssing. 2) Throttle buffered multicast packet transmission in mt76, from Felix Fietkau. 3) Support adaptive interrupt moderation in ice, from Brett Creeley. 4) A lot of struct_size conversions, from Gustavo A. R. Silva. 5) Add peek/push/pop commands to bpftool, as well as bash completion, from Stanislav Fomichev. 6) Optimize sk_msg_clone(), from Vakul Garg. 7) Add SO_BINDTOIFINDEX, from David Herrmann. 8) Be more conservative with local resends due to local congestion, from Yuchung Cheng. 9) Allow vetoing of unsupported VXLAN FDBs, from Petr Machata. 10) Add health buffer support to devlink, from Eran Ben Elisha. 11) Add TXQ scheduling API to mac80211, from Toke Høiland-Jørgensen. 12) Add statistics to basic packet scheduler filter, from Cong Wang. 13) Add GRE tunnel support for mlxsw Spectrum-2, from Nir Dotan. 14) Lots of new IP tunneling forwarding tests, also from Nir Dotan. 15) Add 3ad stats to bonding, from Nikolay Aleksandrov. 16) Lots of probing improvements for bpftool, from Quentin Monnet. 17) Various nfp drive #ebpf JIT improvements from Jakub Kicinski. 18) Allow #ebpf programs to access gso_segs from skb shared info, from Eric Dumazet. 19) Add sock_diag support for AF_XDP sockets, from Björn Töpel. 20) Support 22260 iwlwifi devices, from Luca Coelho. 21) Use rbtree for ipv6 defragmentation, from Peter Oskolkov. 22) Add JMP32 instruction class support to #ebpf, from Jiong Wang. 23) Add spinlock support to #ebpf, from Alexei Starovoitov. 24) Support 256-bit keys and TLS 1.3 in ktls, from Dave Watson. 25) Add device infomation API to devlink, from Jakub Kicinski. 26) Add new timestamping socket options which are y2038 safe, from Deepa Dinamani. 27) Add RX checksum offloading for various sh_eth chips, from Sergei Shtylyov. 28) Flow offload infrastructure, from Pablo Neira Ayuso. 29) Numerous cleanups, improvements, and bug fixes to the PHY layer and many drivers from Heiner Kallweit. 30) Lots of changes to try and make packet scheduler classifiers run lockless as much as possible, from Vlad Buslov. 31) Support BCM957504 chip in bnxt_en driver, from Erik Burrows. 32) Add concurrency tests to tc-tests infrastructure, from Vlad Buslov. 33) Add hwmon support to aquantia, from Heiner Kallweit. 34) Allow 64-bit values for SO_MAX_PACING_RATE, from Eric Dumazet. And I would be remiss if I didn't thank the various major networking subsystem maintainers for integrating much of this work before I even saw it. Alexei Starovoitov, Daniel Borkmann, Pablo Neira Ayuso, Johannes Berg, Kalle Valo, and many others. Thank you!" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2207 commits) net/sched: avoid unused-label warning net: ignore sysctl_devconf_inherit_init_net without SYSCTL phy: mdio-mux: fix Kconfig dependencies net: phy: use phy_modify_mmd_changed in genphy_c45_an_config_aneg net: dsa: mv88e6xxx: add call to mv88e6xxx_ports_cmode_init to probe for new DSA framework selftest/net: Remove duplicate header sky2: Disable MSI on Dell Inspiron 1545 and Gateway P-79 net/mlx5e: Update tx reporter status in case channels were successfully opened devlink: Add support for direct reporter health state update devlink: Update reporter state to error even if recover aborted sctp: call iov_iter_revert() after sending ABORT team: Free BPF filter when unregistering netdev ip6mr: Do not call __IP6_INC_STATS() from preemptible context isdn: mISDN: Fix potential NULL pointer dereference of kzalloc net: dsa: mv88e6xxx: support in-band signalling on SGMII ports with external PHYs cxgb4/chtls: Prefix adapter flags with CXGB4 net-sysfs: Switch to bitmap_zalloc() mellanox: Switch to bitmap_zalloc() bpf: add test cases for non-pointer sanitiation logic mlxsw: i2c: Extend initialization by querying resources data ...
2019-03-05Merge tag 'vfio-v5.1-rc1' of git://github.com/awilliam/linux-vfioLinus Torvalds3-16/+17
Pull VFIO updates from Alex Williamson: - Switch mdev to generic UUID API (Andy Shevchenko) - Fixup platform reset include paths (Masahiro Yamada) - Fix usage of MINORMASK (Chengguang Xu) - Remove noise from duplicate spapr table unsets (Alexey Kardashevskiy) - Restore device state after PM reset (Alex Williamson) - Ensure memory translation enabled for PCI ROM access (Eric Auger) * tag 'vfio-v5.1-rc1' of git://github.com/awilliam/linux-vfio: vfio_pci: Enable memory accesses before calling pci_map_rom vfio/pci: Restore device state on PM transition vfio/spapr_tce: Skip unsetting already unset table samples/vfio-mdev/mtty: expand minor range when registering chrdev region samples/vfio-mdev/mdpy: expand minor range when registering chrdev region samples/vfio-mdev/mbochs: expand minor range when registering chrdev region vfio: expand minor range when registering chrdev region vfio: platform: reset: fix up include directives to remove ccflags-y vfio-mdev: Switch to use new generic UUID API
2019-03-02bpf: HBM test scriptbrakmo1-0/+436
Script for testing HBM (Host Bandwidth Manager) framework. It creates a cgroup to use for testing and load a BPF program to limit egress bandwidht. It then uses iperf3 or netperf to create loads. The output is the goodput in Mbps (unless -D is used). It can work on a single host using loopback or among two hosts (with netperf). When using loopback, it is recommended to also introduce a delay of at least 1ms (-d=1), otherwise the assigned bandwidth is likely to be underutilized. USAGE: $name [out] [-b=<prog>|--bpf=<prog>] [-c=<cc>|--cc=<cc>] [-D] [-d=<delay>|--delay=<delay>] [--debug] [-E] [-f=<#flows>|--flows=<#flows>] [-h] [-i=<id>|--id=<id >] [-l] [-N] [-p=<port>|--port=<port>] [-P] [-q=<qdisc>] [-R] [-s=<server>|--server=<server] [--stats] [-t=<time>|--time=<time>] [-w] [cubic|dctcp] Where: out Egress (default egress) -b or --bpf BPF program filename to load and attach. Default is nrm_out_kern.o for egress, -c or -cc TCP congestion control (cubic or dctcp) -d or --delay Add a delay in ms using netem -D In addition to the goodput in Mbps, it also outputs other detailed information. This information is test dependent (i.e. iperf3 or netperf). --debug Print BPF trace buffer -E Enable ECN (not required for dctcp) -f or --flows Number of concurrent flows (default=1) -i or --id cgroup id (an integer, default is 1) -l Do not limit flows using loopback -N Use netperf instead of iperf3 -h Help -p or --port iperf3 port (default is 5201) -P Use an iperf3 instance for each flow -q Use the specified qdisc. -r or --rate Rate in Mbps (default 1s 1Gbps) -R Use TCP_RR for netperf. 1st flow has req size of 10KB, rest of 1MB. Reply in all cases is 1 byte. More detailed output for each flow can be found in the files netperf.<cg>.<flow>, where <cg> is the cgroup id as specified with the -i flag, and <flow> is the flow id starting at 1 and increasing by 1 for flow (as specified by -f). -s or --server hostname of netperf server. Used to create netperf test traffic between to hosts (default is within host) netserver must be running on the host. --stats Get HBM stats (marked, dropped, etc.) -t or --time duration of iperf3 in seconds (default=5) -w Work conserving flag. cgroup can increase its bandwidth beyond the rate limit specified while there is available bandwidth. Current implementation assumes there is only one NIC (eth0), but can be extended to support multiple NICs. This is just a proof of concept. cubic or dctcp specify TCP CC to use Examples: ./do_hbm_test.sh -l -d=1 -D --stats Runs a 5 second test, using a single iperf3 flow and with the default rate limit of 1Gbps and a delay of 1ms (using netem) using the default TCP congestion control on the loopback device (hence we use "-l" to enforce bandwidth limit on loopback device). Since no direction is specified, it defaults to egress. Since no TCP CC algorithm is specified it uses the system default (Cubic for this test). With no -D flag, only the value of the AGGREGATE OUTPUT would show. id refers to the cgroup id and is useful when running multi cgroup tests (supported by a future patch). This patchset does not support calling TCP's congesion window reduction, even when packets are dropped by the BPF program, resulting in a large number of packets dropped. It is recommended that the current HBM implemenation only be used with ECN enabled flows. A future patch will add support for reducing TCP's cwnd and will increase the performance of non-ECN enabled flows. Output: Details for HBM in cgroup 1 id:1 rate_mbps:493 duration:4.8 secs packets:11355 bytes_MB:590 pkts_dropped:4497 bytes_dropped_MB:292 pkts_marked_percent: 39.60 bytes_marked_percent: 49.49 pkts_dropped_percent: 39.60 bytes_dropped_percent: 49.49 PING AVG DELAY:2.075 AGGREGATE_GOODPUT:505 ./do_nrm_test.sh -l -d=1 -D --stats dctcp Same as above but using dctcp. Note that fewer bytes are dropped (0.01% vs. 49%). Output: Details for HBM in cgroup 1 id:1 rate_mbps:945 duration:4.9 secs packets:16859 bytes_MB:578 pkts_dropped:1 bytes_dropped_MB:0 pkts_marked_percent: 28.74 bytes_marked_percent: 45.15 pkts_dropped_percent: 0.01 bytes_dropped_percent: 0.01 PING AVG DELAY:2.083 AGGREGATE_GOODPUT:965 ./do_nrm_test.sh -d=1 -D --stats As first example, but without limiting loopback device (i.e. no "-l" flag). Since there is no bandwidth limiting, no details for HBM are printed out. Output: Details for HBM in cgroup 1 PING AVG DELAY:2.019 AGGREGATE_GOODPUT:42655 ./do_hbm.sh -l -d=1 -D --stats -f=2 Uses iper3 and does 2 flows ./do_hbm.sh -l -d=1 -D --stats -f=4 -P Uses iperf3 and does 4 flows, each flow as a separate process. ./do_hbm.sh -l -d=1 -D --stats -f=4 -N Uses netperf, 4 flows ./do_hbm.sh -f=1 -r=2000 -t=5 -N -D --stats dctcp -s=<server-name> Uses netperf between two hosts. The remote host name is specified with -s= and you need to start the program netserver manually on the remote host. It will use 1 flow, a rate limit of 2Gbps and dctcp. ./do_hbm.sh -f=1 -r=2000 -t=5 -N -D --stats -w dctcp \ -s=<server-name> As previous, but allows use of extra bandwidth. For this test the rate is 8Gbps vs. 1Gbps of the previous test. Signed-off-by: Lawrence Brakmo <brakmo@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-03-02bpf: User program for testing HBMbrakmo2-0/+444
The program nrm creates a cgroup and attaches a BPF program to the cgroup for testing HBM (Host Bandwidth Manager) for egress traffic. One still needs to create network traffic. This can be done through netesto, netperf or iperf3. A follow-up patch contains a script to create traffic. USAGE: hbm [-d] [-l] [-n <id>] [-r <rate>] [-s] [-t <secs>] [-w] [-h] [prog] Where: -d Print BPF trace debug buffer -l Also limit flows doing loopback -n <#> To create cgroup "/hbm#" and attach prog. Default is /nrm1 This is convenient when testing HBM in more than 1 cgroup -r <rate> Rate limit in Mbps -s Get HBM stats (marked, dropped, etc.) -t <time> Exit after specified seconds (deault is 0) -w Work conserving flag. cgroup can increase its bandwidth beyond the rate limit specified while there is available bandwidth. Current implementation assumes there is only NIC (eth0), but can be extended to support multiple NICs. Currrently only supported for egress. Note, this is just a proof of concept. -h Print this info prog BPF program file name. Name defaults to hbm_out_kern.o More information about HBM can be found in the paper "BPF Host Resource Management" presented at the 2018 Linux Plumbers Conference, Networking Track (http://vger.kernel.org/lpc_net2018_talks/LPC%20BPF%20Network%20Resource%20Paper.pdf) Signed-off-by: Lawrence Brakmo <brakmo@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-03-02bpf: Sample HBM BPF program to limit egress bwbrakmo4-0/+327
A cgroup skb BPF program to limit cgroup output bandwidth. It uses a modified virtual token bucket queue to limit average egress bandwidth. The implementation uses credits instead of tokens. Negative credits imply that queueing would have happened (this is a virtual queue, so no queueing is done by it. However, queueing may occur at the actual qdisc (which is not used for rate limiting). This implementation uses 3 thresholds, one to start marking packets and the other two to drop packets: CREDIT - <--------------------------|------------------------> + | | | 0 | Large pkt | | drop thresh | Small pkt drop Mark threshold thresh The effect of marking depends on the type of packet: a) If the packet is ECN enabled, then the packet is ECN ce marked. The current mark threshold is tuned for DCTCP. c) Else, it is dropped if it is a large packet. If the credit is below the drop threshold, the packet is dropped. Note that dropping a packet through the BPF program does not trigger CWR (Congestion Window Reduction) in TCP packets. A future patch will add support for triggering CWR. This BPF program actually uses 2 drop thresholds, one threshold for larger packets (>= 120 bytes) and another for smaller packets. This protects smaller packets such as SYNs, ACKs, etc. The default bandwidth limit is set at 1Gbps but this can be changed by a user program through a shared BPF map. In addition, by default this BPF program does not limit connections using loopback. This behavior can be overwritten by the user program. There is also an option to calculate some statistics, such as percent of packets marked or dropped, which the user program can access. A latter patch provides such a program (hbm.c) Signed-off-by: Lawrence Brakmo <brakmo@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-03-02samples/bpf: silence compiler warning for xdpsock_user.cYonghong Song1-3/+3
Compiling xdpsock_user.c with 4.8.5, I hit the following compilation warning: HOSTCC samples/bpf/xdpsock_user.o /data/users/yhs/work/net-next/samples/bpf/xdpsock_user.c: In function ‘main’: /data/users/yhs/work/net-next/samples/bpf/xdpsock_user.c:449:6: warning: ‘idx_cq’ may be used unini tialized in this function [-Wmaybe-uninitialized] u32 idx_cq, idx_fq; ^ /data/users/yhs/work/net-next/samples/bpf/xdpsock_user.c:606:7: warning: ‘idx_rx’ may be used unini tialized in this function [-Wmaybe-uninitialized] u32 idx_rx, idx_tx = 0; ^ /data/users/yhs/work/net-next/samples/bpf/xdpsock_user.c:506:6: warning: ‘idx_rx’ may be used unini tialized in this function [-Wmaybe-uninitialized] u32 idx_rx, idx_fq = 0; As an example, the code pattern looks like: u32 idx_cq; ... ret = xsk_ring_prod__reserve(&xsk->umem->fq, rcvd, &idx_fq); if (ret) { ... } ... idx_fq ... The compiler warns since it does not know whether &idx_fq is assigned or not inside the library function xsk_ring_prod__reserve(). Let us assign an initial value 0 to such auto variables to silence compiler warning. Fixes: 248c7f9c0e21 ("samples/bpf: convert xdpsock to use libbpf for AF_XDP access") Signed-off-by: Yonghong Song <yhs@fb.com> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-03-01samples: bpf: use libbpf where easyJakub Kicinski4-25/+35
Some samples don't really need the magic of bpf_load, switch them to libbpf. v2: - specify program types. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-03-01samples: bpf: remove load_sock_ops in favour of bpftoolJakub Kicinski12-114/+16
bpftool can do all the things load_sock_ops used to do, and more. Point users to bpftool instead of maintaining this sample utility. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-03-01samples: bpf: force IPv4 in pingJakub Kicinski5-5/+5
ping localhost may default of IPv6 on modern systems, but samples are trying to only parse IPv4. Force IPv4. samples/bpf/tracex1_user.c doesn't interpret the packet so we don't care which IP version will be used there. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-27samples: bpf: fix: broken sample regarding removed functionDaniel T. Lee3-3/+3
Currently, running sample "task_fd_query" and "tracex3" occurs the following error. On kernel v5.0-rc* this sample will be unavailable due to the removal of function 'blk_start_request' at commit "a1ce35f". (function removed, as "Single Queue IO scheduler" no longer exists) $ sudo ./task_fd_query failed to create kprobe 'blk_start_request' error 'No such file or directory' This commit will change the function 'blk_start_request' to 'blk_mq_start_request' to fix the broken sample. Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-26samples/bpf: convert xdpsock to use libbpf for AF_XDP accessMagnus Karlsson4-648/+261
This commit converts the xdpsock sample application to use the AF_XDP functions present in libbpf. This cuts down the size of it by nearly 300 lines of code. The default ring sizes plus the batch size has been increased and the size of the umem area has decreased. This so that the sample application will provide higher throughput. Note also that the shared umem code has been removed from the sample as this is not supported by libbpf at this point in time. Tested-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-22samples/bpf: Fix dummy program unloading for xdp_redirect samplesToke Høiland-Jørgensen2-2/+2
The xdp_redirect and xdp_redirect_map sample programs both load a dummy program onto the egress interfaces. However, the unload code checks these programs against the wrong id number, and thus refuses to unload them. Fix the comparison to avoid this. Fixes: 3b7a8ec2dec3 ("samples/bpf: Check the prog id before exiting") Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-12samples/vfio-mdev/mtty: expand minor range when registering chrdev regionChengguang Xu1-4/+5
Actually, total amount of available minor number for a single major is MINORMARK + 1. So expand minor range when registering chrdev region. Signed-off-by: Chengguang Xu <cgxu519@gmx.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2019-02-12samples/vfio-mdev/mdpy: expand minor range when registering chrdev regionChengguang Xu1-4/+4
Actually, total amount of available minor number for a single major is MINORMARK + 1. So expand minor range when registering chrdev region. Signed-off-by: Chengguang Xu <cgxu519@gmx.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2019-02-12samples/vfio-mdev/mbochs: expand minor range when registering chrdev regionChengguang Xu1-4/+4
Actually, total amount of available minor number for a single major is MINORMARK + 1. So expand minor range when registering chrdev region. Signed-off-by: Chengguang Xu <cgxu519@gmx.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2019-02-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
An ipvlan bug fix in 'net' conflicted with the abstraction away of the IPV6 specific support in 'net-next'. Similarly, a bug fix for mlx5 in 'net' conflicted with the flow action conversion in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-05vfio-mdev: Switch to use new generic UUID APIAndy Shevchenko1-4/+4
There are new types and helpers that are supposed to be used in new code. As a preparation to get rid of legacy types and API functions do the conversion here. Cc: Kirti Wankhede <kwankhede@nvidia.com> Cc: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2019-02-02samples/bpf: Check the prog id before exitingMaciej Fijalkowski10-48/+308
Check the program id within the signal handler on polling xdp samples that were previously converted to libbpf usage. Avoid the situation of unloading the program that was not attached by sample that is exiting. Handle also the case where bpf_get_link_xdp_id didn't exit with an error but the xdp program was not found on an interface. Reported-by: Michal Papaj <michal.papaj@intel.com> Reported-by: Jakub Spizewski <jakub.spizewski@intel.com> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-02samples/bpf: Add a "force" flag to XDP samplesMaciej Fijalkowski10-40/+119
Make xdp samples consistent with iproute2 behavior and set the XDP_FLAGS_UPDATE_IF_NOEXIST by default when setting the xdp program on interface. Provide an option for user to force the program loading, which as a result will not include the mentioned flag in bpf_set_link_xdp_fd call. Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-02samples/bpf: Extend RLIMIT_MEMLOCK for xdp_{sample_pkts, router_ipv4}Maciej Fijalkowski2-0/+14
There is a common problem with xdp samples that happens when user wants to run a particular sample and some bpf program is already loaded. The default 64kb RLIMIT_MEMLOCK resource limit will cause a following error (assuming that xdp sample that is failing was converted to libbpf usage): libbpf: Error in bpf_object__probe_name():Operation not permitted(1). Couldn't load basic 'r0 = 0' BPF program. libbpf: failed to load object './xdp_sample_pkts_kern.o' Fix it in xdp_sample_pkts and xdp_router_ipv4 by setting RLIMIT_MEMLOCK to RLIM_INFINITY. Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-02samples/bpf: Convert XDP samples to libbpf usageMaciej Fijalkowski6-103/+253
Some of XDP samples that are attaching the bpf program to the interface via libbpf's bpf_set_link_xdp_fd are still using the bpf_load.c for loading and manipulating the ebpf program and maps. Convert them to do this through libbpf usage and remove bpf_load from the picture. While at it remove what looks like debug leftover in xdp_redirect_map_user.c In xdp_redirect_cpu, change the way that the program to be loaded onto interface is chosen - user now needs to pass the program's section name instead of the relative number. In case of typo print out the section names to choose from. Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-02samples/bpf: xdp_redirect_cpu have not need for read_trace_pipeJesper Dangaard Brouer1-10/+0
The sample xdp_redirect_cpu is not using helper bpf_trace_printk. Thus it makes no sense that the --debug option us reading from /sys/kernel/debug/tracing/trace_pipe via read_trace_pipe. Simply remove it. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-01-30samples: mei: use /dev/mei0 instead of /dev/meiTomas Winkler1-1/+1
The device was moved from misc device to character devices to support multiple mei devices. Cc: <stable@vger.kernel.org> #v4.9+ Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller1-0/+20
Daniel Borkmann says: ==================== pull-request: bpf-next 2019-01-29 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Teach verifier dead code removal, this also allows for optimizing / removing conditional branches around dead code and to shrink the resulting image. Code store constrained architectures like nfp would have hard time doing this at JIT level, from Jakub. 2) Add JMP32 instructions to BPF ISA in order to allow for optimizing code generation for 32-bit sub-registers. Evaluation shows that this can result in code reduction of ~5-20% compared to 64 bit-only code generation. Also add implementation for most JITs, from Jiong. 3) Add support for __int128 types in BTF which is also needed for vmlinux's BTF conversion to work, from Yonghong. 4) Add a new command to bpftool in order to dump a list of BPF-related parameters from the system or for a specific network device e.g. in terms of available prog/map types or helper functions, from Quentin. 5) Add AF_XDP sock_diag interface for querying sockets from user space which provides information about the RX/TX/fill/completion rings, umem, memory usage etc, from Björn. 6) Add skb context access for skb_shared_info->gso_segs field, from Eric. 7) Add support for testing flow dissector BPF programs by extending existing BPF_PROG_TEST_RUN infrastructure, from Stanislav. 8) Split BPF kselftest's test_verifier into various subgroups of tests in order better deal with merge conflicts in this area, from Jakub. 9) Add support for queue/stack manipulations in bpftool, from Stanislav. 10) Document BTF, from Yonghong. 11) Dump supported ELF section names in libbpf on program load failure, from Taeung. 12) Silence a false positive compiler warning in verifier's BTF handling, from Peter. 13) Fix help string in bpftool's feature probing, from Prashant. 14) Remove duplicate includes in BPF kselftests, from Yue. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-27selftests: bpf: functional and min/max reasoning unit tests for JMP32Jiong Wang1-0/+20
This patch adds unit tests for new JMP32 instructions. This patch also added the new BPF_JMP32_REG and BPF_JMP32_IMM macros to samples/bpf/bpf_insn.h so that JMP32 insn builders are available to tests under 'samples' directory. Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Jiong Wang <jiong.wang@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-01-15samples/bpf: workaround clang asm goto compilation errorsYonghong Song2-0/+17
x86 compilation has required asm goto support since 4.17. Since clang does not support asm goto, at 4.17, Commit b1ae32dbab50 ("x86/cpufeature: Guard asm_volatile_goto usage for BPF compilation") worked around the issue by permitting an alternative implementation without asm goto for clang. At 5.0, more asm goto usages appeared. [yhs@148 x86]$ egrep -r asm_volatile_goto include/asm/cpufeature.h: asm_volatile_goto("1: jmp 6f\n" include/asm/jump_label.h: asm_volatile_goto("1:" include/asm/jump_label.h: asm_volatile_goto("1:" include/asm/rmwcc.h: asm_volatile_goto (fullop "; j" #cc " %l[cc_label]" \ include/asm/uaccess.h: asm_volatile_goto("\n" \ include/asm/uaccess.h: asm_volatile_goto("\n" \ [yhs@148 x86]$ Compiling samples/bpf directories, most bpf programs failed compilation with error messages like: In file included from /home/yhs/work/bpf-next/samples/bpf/xdp_sample_pkts_kern.c:2: In file included from /home/yhs/work/bpf-next/include/linux/ptrace.h:6: In file included from /home/yhs/work/bpf-next/include/linux/sched.h:15: In file included from /home/yhs/work/bpf-next/include/linux/sem.h:5: In file included from /home/yhs/work/bpf-next/include/uapi/linux/sem.h:5: In file included from /home/yhs/work/bpf-next/include/linux/ipc.h:9: In file included from /home/yhs/work/bpf-next/include/linux/refcount.h:72: /home/yhs/work/bpf-next/arch/x86/include/asm/refcount.h:70:9: error: 'asm goto' constructs are not supported yet return GEN_BINARY_SUFFIXED_RMWcc(LOCK_PREFIX "subl", ^ /home/yhs/work/bpf-next/arch/x86/include/asm/rmwcc.h:67:2: note: expanded from macro 'GEN_BINARY_SUFFIXED_RMWcc' __GEN_RMWcc(op " %[val], %[var]\n\t" suffix, var, cc, \ ^ /home/yhs/work/bpf-next/arch/x86/include/asm/rmwcc.h:21:2: note: expanded from macro '__GEN_RMWcc' asm_volatile_goto (fullop "; j" #cc " %l[cc_label]" \ ^ /home/yhs/work/bpf-next/include/linux/compiler_types.h:188:37: note: expanded from macro 'asm_volatile_goto' #define asm_volatile_goto(x...) asm goto(x) Most implementation does not even provide an alternative implementation. And it is also not practical to make changes for each call site. This patch workarounded the asm goto issue by redefining the macro like below: #define asm_volatile_goto(x...) asm volatile("invalid use of asm_volatile_goto") If asm_volatile_goto is not used by bpf programs, which is typically the case, nothing bad will happen. If asm_volatile_goto is used by bpf programs, which is incorrect, the compiler will issue an error since "invalid use of asm_volatile_goto" is not valid assembly codes. With this patch, all bpf programs under samples/bpf can pass compilation. Note that bpf programs under tools/testing/selftests/bpf/ compiled fine as they do not access kernel internal headers. Fixes: e769742d3584 ("Revert "x86/jump-labels: Macrofy inline assembly code to work around GCC inlining bugs"") Fixes: 18fe58229d80 ("x86, asm: change the GEN_*_RMWcc() macros to not quote the condition") Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-01-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds3-9/+9
Pull networking fixes from David Miller: 1) Fix regression in multi-SKB responses to RTM_GETADDR, from Arthur Gautier. 2) Fix ipv6 frag parsing in openvswitch, from Yi-Hung Wei. 3) Unbounded recursion in ipv4 and ipv6 GUE tunnels, from Stefano Brivio. 4) Use after free in hns driver, from Yonglong Liu. 5) icmp6_send() needs to handle the case of NULL skb, from Eric Dumazet. 6) Missing rcu read lock in __inet6_bind() when operating on mapped addresses, from David Ahern. 7) Memory leak in tipc-nl_compat_publ_dump(), from Gustavo A. R. Silva. 8) Fix PHY vs r8169 module loading ordering issues, from Heiner Kallweit. 9) Fix bridge vlan memory leak, from Ido Schimmel. 10) Dev refcount leak in AF_PACKET, from Jason Gunthorpe. 11) Infoleak in ipv6_local_error(), flow label isn't completely initialized. From Eric Dumazet. 12) Handle mv88e6390 errata, from Andrew Lunn. 13) Making vhost/vsock CID hashing consistent, from Zha Bin. 14) Fix lack of UMH cleanup when it unexpectedly exits, from Taehee Yoo. 15) Bridge forwarding must clear skb->tstamp, from Paolo Abeni. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (87 commits) bnxt_en: Fix context memory allocation. bnxt_en: Fix ring checking logic on 57500 chips. mISDN: hfcsusb: Use struct_size() in kzalloc() net: clear skb->tstamp in bridge forwarding path net: bpfilter: disallow to remove bpfilter module while being used net: bpfilter: restart bpfilter_umh when error occurred net: bpfilter: use cleanup callback to release umh_info umh: add exit routine for UMH process isdn: i4l: isdn_tty: Fix some concurrency double-free bugs vhost/vsock: fix vhost vsock cid hashing inconsistent net: stmmac: Prevent RX starvation in stmmac_napi_poll() net: stmmac: Fix the logic of checking if RX Watchdog must be enabled net: stmmac: Check if CBS is supported before configuring net: stmmac: dwxgmac2: Only clear interrupts that are active net: stmmac: Fix PCI module removal leak tools/bpf: fix bpftool map dump with bitfields tools/bpf: test btf bitfield with >=256 struct member offset bpf: fix bpffs bitfield pretty print net: ethernet: mediatek: fix warning in phy_start_aneg tcp: change txhash on SYN-data timeout ...
2019-01-10samples: bpf: user proper argument indexIoana Ciornei1-1/+1
Use optind as index for argv instead of a hardcoded value. When the program has options this leads to improper parameter handling. Fixes: dc378a1ab5b6 ("samples: bpf: get ifindex from ifname") Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Acked-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-01-08samples/seccomp: Fix 32-bit buildTycho Andersen1-0/+1
Both the .o and the actual executable need to be built with -m32 in order to link correctly. Reported-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Tycho Andersen <tycho@tycho.ws> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: Borislav Petkov <bp@alien8.de> Cc: James Morris <jmorris@namei.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: fec7b6690541 ("samples: add an example of seccomp user trap") Link: http://lkml.kernel.org/r/20190107231631.1849-1-tycho@tycho.ws Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-01-08selftests/bpf: fix incorrect users of create_and_get_cgroupStanislav Fomichev2-8/+8
We have some tests that assume create_and_get_cgroup returns -1 on error which is incorrect (it returns 0 on error). Since fd might be zero in general case, change create_and_get_cgroup to return -1 on error and fix the users that assume 0 on error. Fixes: f269099a7e7a ("tools/bpf: add a selftest for bpf_get_current_cgroup_id() helper") Fixes: 7d2c6cfc5411 ("bpf: use --cgroup in test_suite if supplied") v2: - instead of fixing the uses that assume -1 on error, convert the users that assume 0 on error (fd might be zero in general case) Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-01-06Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID updates from Jiri Kosina: - high-resolution scrolling support that gracefully handles differences between MS and Logitech implementations in HW, from Peter Hutterer and Harry Cutts - MSI IRQ support for intel-ish driver, from Song Hongyan - support for new hardware (Cougar 700K, Odys Winbook 13, ASUS FX503VD, ASUS T101HA) from Daniel M. Lambea, Hans de Goede and Aleix Roca Nonell - other small assorted fixups * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (22 commits) HID: i2c-hid: Add Odys Winbook 13 to descriptor override HID: lenovo: Add checks to fix of_led_classdev_register HID: intel-ish-hid: add MSI interrupt support HID: debug: Change to use DEFINE_SHOW_ATTRIBUTE macro HID: doc: fix wrong data structure reference for UHID_OUTPUT HID: intel-ish-hid: fixes incorrect error handling HID: asus: Add support for the ASUS T101HA keyboard dock HID: logitech: Use LDJ_DEVICE macro for existing Logitech mice HID: logitech: Enable high-resolution scrolling on Logitech mice HID: logitech: Add function to enable HID++ 1.0 "scrolling acceleration" HID: logitech-hidpp: fix typo, hiddpp to hidpp HID: input: use the Resolution Multiplier for high-resolution scrolling HID: core: process the Resolution Multiplier HID: core: store the collections as a basic tree Input: add `REL_WHEEL_HI_RES` and `REL_HWHEEL_HI_RES` HID: input: support Microsoft wireless radio control hotkey HID: use macros in IS_INPUT_APPLICATION HID: asus: Add support for the ASUS FX503VD laptop HID: asus: Add event handler to catch unmapped Asus Vendor UsagePage codes HID: cougar: Add support for Cougar 700K Gaming Keyboard ...
2019-01-06Merge branch 'for-linus' of ↵Linus Torvalds2-0/+9
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching Pull livepatch update from Jiri Kosina: "Return value checking fixup in livepatching samples, from Nicholas Mc Guire" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching: livepatch: check kzalloc return values
2019-01-02Merge branch 'next-seccomp' of ↵Linus Torvalds3-1/+382
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull seccomp updates from James Morris: - Add SECCOMP_RET_USER_NOTIF - seccomp fixes for sparse warnings and s390 build (Tycho) * 'next-seccomp' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: seccomp, s390: fix build for syscall type change seccomp: fix poor type promotion samples: add an example of seccomp user trap seccomp: add a return code to trap to userspace seccomp: switch system call argument type to void * seccomp: hoist struct seccomp_data recalculation higher
2018-12-29Merge tag 'kbuild-v4.21' of ↵Linus Torvalds2-4/+2
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: "Kbuild core: - remove unneeded $(call cc-option,...) switches - consolidate Clang compiler flags into CLANG_FLAGS - announce the deprecation of SUBDIRS - fix single target build for external module - simplify the dependencies of 'prepare' stage targets - allow fixdep to directly write to .*.cmd files - simplify dependency generation for CONFIG_TRIM_UNUSED_KSYMS - change if_changed_rule to accept multi-line recipe - move .SECONDARY special target to scripts/Kbuild.include - remove redundant 'set -e' - improve parallel execution for CONFIG_HEADERS_CHECK - misc cleanups Treewide fixes and cleanups - set Clang flags correctly for PowerPC boot images - fix UML build error with CONFIG_GCC_PLUGINS - remove unneeded patterns from .gitignore files - refactor firmware/Makefile - remove unneeded rules for *offsets.s - avoid unneeded regeneration of intermediate .s files - clean up ./Kbuild Modpost: - remove unused -M, -K options - fix false positive warnings about section mismatch - use simple devtable lookup instead of linker magic - misc cleanups Coccinelle: - relax boolinit.cocci checks for overall consistency - fix warning messages of boolinit.cocci Other tools: - improve -dirty check of scripts/setlocalversion - add a tool to generate compile_commands.json from .*.cmd files" * tag 'kbuild-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (51 commits) kbuild: remove unused cmd_gentimeconst kbuild: remove $(obj)/ prefixes in ./Kbuild treewide: add intermediate .s files to targets treewide: remove explicit rules for *offsets.s firmware: refactor firmware/Makefile firmware: remove unnecessary patterns from .gitignore scripts: remove unnecessary ihex2fw and check-lc_ctypes from .gitignore um: remove unused filechk_gen_header in Makefile scripts: add a tool to produce a compile_commands.json file kbuild: add -Werror=implicit-int flag unconditionally kbuild: add -Werror=strict-prototypes flag unconditionally kbuild: add -fno-PIE flag unconditionally scripts: coccinelle: Correct warning message scripts: coccinelle: only suggest true/false in files that already use them kbuild: handle part-of-module correctly for *.ll and *.symtypes kbuild: refactor part-of-module kbuild: refactor quiet_modtag kbuild: remove redundant quiet_modtag for $(obj-m) kbuild: refactor Makefile.asm-generic user/Makefile: Fix typo and capitalization in comment section ...
2018-12-29Merge tag 'vfio-v4.21-rc1' of git://github.com/awilliam/linux-vfioLinus Torvalds1-13/+13
Pull VFIO updates from Alex Williamson: - Replace global vfio-pci lock with per bus lock to allow concurrent open and release (Alex Williamson) - Declare mdev function as static (Paolo Cretaro) - Convert char to u8 in mdev/mtty sample driver (Nathan Chancellor) * tag 'vfio-v4.21-rc1' of git://github.com/awilliam/linux-vfio: vfio-mdev/samples: Use u8 instead of char for handle functions vfio/mdev: add static modifier to add_mdev_supported_type vfio/pci: Parallelize device open and release
2018-12-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds3-23/+51
Pull networking updates from David Miller: 1) New ipset extensions for matching on destination MAC addresses, from Stefano Brivio. 2) Add ipv4 ttl and tos, plus ipv6 flow label and hop limit offloads to nfp driver. From Stefano Brivio. 3) Implement GRO for plain UDP sockets, from Paolo Abeni. 4) Lots of work from Michał Mirosław to eliminate the VLAN_TAG_PRESENT bit so that we could support the entire vlan_tci value. 5) Rework the IPSEC policy lookups to better optimize more usecases, from Florian Westphal. 6) Infrastructure changes eliminating direct manipulation of SKB lists wherever possible, and to always use the appropriate SKB list helpers. This work is still ongoing... 7) Lots of PHY driver and state machine improvements and simplifications, from Heiner Kallweit. 8) Various TSO deferral refinements, from Eric Dumazet. 9) Add ntuple filter support to aquantia driver, from Dmitry Bogdanov. 10) Batch dropping of XDP packets in tuntap, from Jason Wang. 11) Lots of cleanups and improvements to the r8169 driver from Heiner Kallweit, including support for ->xmit_more. This driver has been getting some much needed love since he started working on it. 12) Lots of new forwarding selftests from Petr Machata. 13) Enable VXLAN learning in mlxsw driver, from Ido Schimmel. 14) Packed ring support for virtio, from Tiwei Bie. 15) Add new Aquantia AQtion USB driver, from Dmitry Bezrukov. 16) Add XDP support to dpaa2-eth driver, from Ioana Ciocoi Radulescu. 17) Implement coalescing on TCP backlog queue, from Eric Dumazet. 18) Implement carrier change in tun driver, from Nicolas Dichtel. 19) Support msg_zerocopy in UDP, from Willem de Bruijn. 20) Significantly improve garbage collection of neighbor objects when the table has many PERMANENT entries, from David Ahern. 21) Remove egdev usage from nfp and mlx5, and remove the facility completely from the tree as it no longer has any users. From Oz Shlomo and others. 22) Add a NETDEV_PRE_CHANGEADDR so that drivers can veto the change and therefore abort the operation before the commit phase (which is the NETDEV_CHANGEADDR event). From Petr Machata. 23) Add indirect call wrappers to avoid retpoline overhead, and use them in the GRO code paths. From Paolo Abeni. 24) Add support for netlink FDB get operations, from Roopa Prabhu. 25) Support bloom filter in mlxsw driver, from Nir Dotan. 26) Add SKB extension infrastructure. This consolidates the handling of the auxiliary SKB data used by IPSEC and bridge netfilter, and is designed to support the needs to MPTCP which could be integrated in the future. 27) Lots of XDP TX optimizations in mlx5 from Tariq Toukan. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1845 commits) net: dccp: fix kernel crash on module load drivers/net: appletalk/cops: remove redundant if statement and mask bnx2x: Fix NULL pointer dereference in bnx2x_del_all_vlans() on some hw net/net_namespace: Check the return value of register_pernet_subsys() net/netlink_compat: Fix a missing check of nla_parse_nested ieee802154: lowpan_header_create check must check daddr net/mlx4_core: drop useless LIST_HEAD mlxsw: spectrum: drop useless LIST_HEAD net/mlx5e: drop useless LIST_HEAD iptunnel: Set tun_flags in the iptunnel_metadata_reply from src net/mlx5e: fix semicolon.cocci warnings staging: octeon: fix build failure with XFRM enabled net: Revert recent Spectre-v1 patches. can: af_can: Fix Spectre v1 vulnerability packet: validate address length if non-zero nfc: af_nfc: Fix Spectre v1 vulnerability phonet: af_phonet: Fix Spectre v1 vulnerability net: core: Fix Spectre v1 vulnerability net: minor cleanup in skb_ext_add() net: drop the unused helper skb_ext_get() ...
2018-12-23treewide: add intermediate .s files to targetsMasahiro Yamada1-0/+1
Avoid unneeded recreation of these in the incremental build. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-23treewide: remove explicit rules for *offsets.sMasahiro Yamada1-3/+0
These explicit rules are unneeded because scripts/Makefile.build provides a pattern rule to create %.s from %.c Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-18livepatch: check kzalloc return valuesNicholas Mc Guire2-0/+9
kzalloc() return should always be checked - notably in example code where this may be seen as reference. On failure of allocation in livepatch_fix1_dummy_alloc() respectively dummy_alloc() previous allocation is freed (thanks to Petr Mladek <pmladek@suse.com> for catching this) and NULL returned. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Fixes: 439e7271dc2b ("livepatch: introduce shadow variable API") Acked-by: Joe Lawrence <joe.lawrence@redhat.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-12-17vfio-mdev/samples: Use u8 instead of char for handle functionsNathan Chancellor1-13/+13
Clang warns: samples/vfio-mdev/mtty.c:592:39: warning: implicit conversion from 'int' to 'char' changes value from 162 to -94 [-Wconstant-conversion] *buf = UART_MSR_DSR | UART_MSR_DDSR | UART_MSR_DCD; ~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~ 1 warning generated. Turns out that all uses of buf in this function ultimately end up stored or cast to an unsigned type. Just use u8, which has the same number of bits but can store this larger number so Clang no longer warns. Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2018-12-12samples: add an example of seccomp user trapTycho Andersen3-1/+382
The idea here is just to give a demonstration of how one could safely use the SECCOMP_RET_USER_NOTIF feature to do mount policies. This particular policy is (as noted in the comment) not very interesting, but it serves to illustrate how one might apply a policy dodging the various TOCTOU issues. Signed-off-by: Tycho Andersen <tycho@tycho.ws> CC: Kees Cook <keescook@chromium.org> CC: Andy Lutomirski <luto@amacapital.net> CC: Oleg Nesterov <oleg@redhat.com> CC: Eric W. Biederman <ebiederm@xmission.com> CC: "Serge E. Hallyn" <serge@hallyn.com> CC: Christian Brauner <christian@brauner.io> CC: Tyler Hicks <tyhicks@canonical.com> CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-04samples: bpf: fix: seg fault with NULL pointer argDaniel T. Lee1-1/+3
When NULL pointer accidentally passed to write_kprobe_events, due to strlen(NULL), segmentation fault happens. Changed code returns -1 to deal with this situation. Bug issued with Smatch, static analysis. Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-03media: v4l2-pci-skeleton: replace vb2_buffer with vb2_v4l2_bufferMichael Tretter1-5/+6
Commit 2d7007153f0c ("[media] media: videobuf2: Restructure vb2_buffer") replaced vb2_buffer with vb2_v4l2_buffer in all v4l2 drivers. The restructuring skipped the v4l2-pci-skeleton, probably because it resides outside the drivers directory. The v4l2_buf_ops assume that the passed buffer is a vb2_v4l2_buffer. This is not the case if the skel_buffer is based on vb2_buffer instead of vb2_v4l2_buffer. Replace vb2_buffer with vb2_v4l2_buffer in the skeleton to make sure that future drivers that are based on the skeleton use vb2_v4l2_buffer. Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-12-01kbuild: announce removal of SUBDIRS if usedMasahiro Yamada1-1/+1
SUBDIRS has been kept as a backward compatibility since commit ("[PATCH] kbuild: external module support") in 2002. We do not need multiple ways to do the same thing, so I will remove SUBDIRS after the Linux 5.3 release. I cleaned up in-tree code, and updated the document so that nobody would try to use it. Meanwhile, display the following warning if SUBDIRS is used. Makefile:189: ================= WARNING ================ Makefile:190: 'SUBDIRS' will be removed after Linux 5.3 Makefile:191: Please use 'M=' or 'KBUILD_EXTMOD' instead Makefile:192: ========================================== Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Boris Brezillon <boris.brezillon@bootlin.com> # for scx200_docflash.c Acked-by: Guenter Roeck <linux@roeck-us.net> # for scx200_wdt.c
2018-12-01samples: bpf: get ifindex from ifnameMatteo Croce1-2/+7
Find the ifindex with if_nametoindex() instead of requiring the numeric ifindex. Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-12-01samples: bpf: improve xdp1 exampleMatteo Croce1-10/+8
Store only the total packet count for every protocol, instead of the whole per-cpu array. Use bpf_map_get_next_key() to iterate the map, instead of looking up all the protocols. Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-11-24samples: bpf: fix: error handling regarding kprobe_eventsDaniel T. Lee1-9/+24
Currently, kprobe_events failure won't be handled properly. Due to calling system() indirectly to write to kprobe_events, it can't be identified whether an error is derived from kprobe or system. // buf = "echo '%c:%s %s' >> /s/k/d/t/kprobe_events" err = system(buf); if (err < 0) { printf("failed to create kprobe .."); return -1; } For example, running ./tracex7 sample in ext4 partition, "echo p:open_ctree open_ctree >> /s/k/d/t/kprobe_events" gets 256 error code system() failure. => The error comes from kprobe, but it's not handled correctly. According to man of system(3), it's return value just passes the termination status of the child shell rather than treating the error as -1. (don't care success) Which means, currently it's not working as desired. (According to the upper code snippet) ex) running ./tracex7 with ext4 env. # Current Output sh: echo: I/O error failed to open event open_ctree # Desired Output failed to create kprobe 'open_ctree' error 'No such file or directory' The problem is, error can't be verified whether from child ps or system. But using write() directly can verify the command failure, and it will treat all error as -1. So I suggest using write() directly to 'kprobe_events' rather than calling system(). Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-11-21HID: samples/hidraw: fix typo in printed messageJonathan Davies1-1/+1
Signed-off-by: Jonathan Davies <jonathan.davies@nutanix.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-11-20tools/bpf: do not use pahole if clang/llvm can generate BTF sectionsYonghong Song1-0/+8
Add additional checks in tools/testing/selftests/bpf and samples/bpf such that if clang/llvm compiler can generate BTF sections, do not use pahole. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-11-08bpf_load: add map name to load_maps error messageShannon Nelson1-2/+2
To help when debugging bpf/xdp load issues, have the load_map() error message include the number and name of the map that failed. Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>