summaryrefslogtreecommitdiff
path: root/scripts/Makefile.lib
AgeCommit message (Collapse)AuthorFilesLines
2023-05-22kbuild: Disallow DTB overlays to built from .dts named source filesAndrew Davis1-3/+0
As a follow up to the series allowing DTB overlays to built from .dtso files. Now that all overlays have been renamed, remove the ability to build from overlays from .dts files to prevent any files with the old name from accidental being added. Signed-off-by: Andrew Davis <afd@ti.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Andy Shevchenko <andriy.shevchenko@intel.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-01-22kbuild: unify cmd_dt_S_dtb and cmd_dt_S_dtboMasahiro Yamada1-30/+15
cmd_dt_S_dtb and cmd_dt_S_dtbo are almost the same; the only difference is the prefix of the begin/end symbols. (__dtb vs __dtbo) Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2022-12-19Merge tag 'powerpc-6.2-1' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - Add powerpc qspinlock implementation optimised for large system scalability and paravirt. See the merge message for more details - Enable objtool to be built on powerpc to generate mcount locations - Use a temporary mm for code patching with the Radix MMU, so the writable mapping is restricted to the patching CPU - Add an option to build the 64-bit big-endian kernel with the ELFv2 ABI - Sanitise user registers on interrupt entry on 64-bit Book3S - Many other small features and fixes Thanks to Aboorva Devarajan, Angel Iglesias, Benjamin Gray, Bjorn Helgaas, Bo Liu, Chen Lifu, Christoph Hellwig, Christophe JAILLET, Christophe Leroy, Christopher M. Riedl, Colin Ian King, Deming Wang, Disha Goel, Dmitry Torokhov, Finn Thain, Geert Uytterhoeven, Gustavo A. R. Silva, Haowen Bai, Joel Stanley, Jordan Niethe, Julia Lawall, Kajol Jain, Laurent Dufour, Li zeming, Miaoqian Lin, Michael Jeanson, Nathan Lynch, Naveen N. Rao, Nayna Jain, Nicholas Miehlbradt, Nicholas Piggin, Pali Rohár, Randy Dunlap, Rohan McLure, Russell Currey, Sathvika Vasireddy, Shaomin Deng, Stephen Kitt, Stephen Rothwell, Thomas Weißschuh, Tiezhu Yang, Uwe Kleine-König, Xie Shaowen, Xiu Jianfeng, XueBing Chen, Yang Yingliang, Zhang Jiaming, ruanjinjie, Jessica Yu, and Wolfram Sang. * tag 'powerpc-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (181 commits) powerpc/code-patching: Fix oops with DEBUG_VM enabled powerpc/qspinlock: Fix 32-bit build powerpc/prom: Fix 32-bit build powerpc/rtas: mandate RTAS syscall filtering powerpc/rtas: define pr_fmt and convert printk call sites powerpc/rtas: clean up includes powerpc/rtas: clean up rtas_error_log_max initialization powerpc/pseries/eeh: use correct API for error log size powerpc/rtas: avoid scheduling in rtas_os_term() powerpc/rtas: avoid device tree lookups in rtas_os_term() powerpc/rtasd: use correct OF API for event scan rate powerpc/rtas: document rtas_call() powerpc/pseries: unregister VPA when hot unplugging a CPU powerpc/pseries: reset the RCU watchdogs after a LPM powerpc: Take in account addition CPU node when building kexec FDT powerpc: export the CPU node count powerpc/cpuidle: Set CPUIDLE_FLAG_POLLING for snooze state powerpc/dts/fsl: Fix pca954x i2c-mux node names cxl: Remove unnecessary cxl_pci_window_alignment() selftests/powerpc: Fix resource leaks ...
2022-12-15Merge tag 'x86_core_for_v6.2' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 core updates from Borislav Petkov: - Add the call depth tracking mitigation for Retbleed which has been long in the making. It is a lighterweight software-only fix for Skylake-based cores where enabling IBRS is a big hammer and causes a significant performance impact. What it basically does is, it aligns all kernel functions to 16 bytes boundary and adds a 16-byte padding before the function, objtool collects all functions' locations and when the mitigation gets applied, it patches a call accounting thunk which is used to track the call depth of the stack at any time. When that call depth reaches a magical, microarchitecture-specific value for the Return Stack Buffer, the code stuffs that RSB and avoids its underflow which could otherwise lead to the Intel variant of Retbleed. This software-only solution brings a lot of the lost performance back, as benchmarks suggest: https://lore.kernel.org/all/20220915111039.092790446@infradead.org/ That page above also contains a lot more detailed explanation of the whole mechanism - Implement a new control flow integrity scheme called FineIBT which is based on the software kCFI implementation and uses hardware IBT support where present to annotate and track indirect branches using a hash to validate them - Other misc fixes and cleanups * tag 'x86_core_for_v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (80 commits) x86/paravirt: Use common macro for creating simple asm paravirt functions x86/paravirt: Remove clobber bitmask from .parainstructions x86/debug: Include percpu.h in debugreg.h to get DECLARE_PER_CPU() et al x86/cpufeatures: Move X86_FEATURE_CALL_DEPTH from bit 18 to bit 19 of word 11, to leave space for WIP X86_FEATURE_SGX_EDECCSSA bit x86/Kconfig: Enable kernel IBT by default x86,pm: Force out-of-line memcpy() objtool: Fix weak hole vs prefix symbol objtool: Optimize elf_dirty_reloc_sym() x86/cfi: Add boot time hash randomization x86/cfi: Boot time selection of CFI scheme x86/ibt: Implement FineIBT objtool: Add --cfi to generate the .cfi_sites section x86: Add prefix symbols for function padding objtool: Add option to generate prefix symbols objtool: Avoid O(bloody terrible) behaviour -- an ode to libelf objtool: Slice up elf_create_section_symbol() kallsyms: Revert "Take callthunks into account" x86: Unconfuse CONFIG_ and X86_FEATURE_ namespaces x86/retpoline: Fix crash printing warning x86/paravirt: Fix a !PARAVIRT build warning ...
2022-11-18objtool: Add --mnop as an option to --mcountSathvika Vasireddy1-0/+3
Some architectures (powerpc) may not support ftrace locations being nop'ed out at build time. Introduce CONFIG_HAVE_OBJTOOL_NOP_MCOUNT for objtool, as a means for architectures to enable nop'ing of ftrace locations. Add --mnop as an option to objtool --mcount, to indicate support for the same. Also, make sure that --mnop can be passed as an option to objtool only when --mcount is passed. Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by: Josh Poimboeuf <jpoimboe@kernel.org> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Sathvika Vasireddy <sv@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221114175754.1131267-12-sv@linux.ibm.com
2022-11-01x86/ibt: Implement FineIBTPeter Zijlstra1-0/+1
Implement an alternative CFI scheme that merges both the fine-grained nature of kCFI but also takes full advantage of the coarse grained hardware CFI as provided by IBT. To contrast: kCFI is a pure software CFI scheme and relies on being able to read text -- specifically the instruction *before* the target symbol, and does the hash validation *before* doing the call (otherwise control flow is compromised already). FineIBT is a software and hardware hybrid scheme; by ensuring every branch target starts with a hash validation it is possible to place the hash validation after the branch. This has several advantages: o the (hash) load is avoided; no memop; no RX requirement. o IBT WAIT-FOR-ENDBR state is a speculation stop; by placing the hash validation in the immediate instruction after the branch target there is a minimal speculation window and the whole is a viable defence against SpectreBHB. o Kees feels obliged to mention it is slightly more vulnerable when the attacker can write code. Obviously this patch relies on kCFI, but additionally it also relies on the padding from the call-depth-tracking patches. It uses this padding to place the hash-validation while the call-sites are re-written to modify the indirect target to be 16 bytes in front of the original target, thus hitting this new preamble. Notably, there is no hardware that needs call-depth-tracking (Skylake) and supports IBT (Tigerlake and onwards). Suggested-by: Joao Moreira (Intel) <joao@overdrivepizza.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20221027092842.634714496@infradead.org
2022-11-01x86: Add prefix symbols for function paddingPeter Zijlstra1-0/+1
When code is compiled with: -fpatchable-function-entry=${PADDING_BYTES},${PADDING_BYTES} functions will have PADDING_BYTES of NOP in front of them. Unwinders and other things that symbolize code locations will typically attribute these bytes to the preceding function. Given that these bytes nominally belong to the following symbol this mis-attribution is confusing. Inspired by the fact that CFI_CLANG emits __cfi_##name symbols to claim these bytes, use objtool to emit __pfx_##name symbols to do the same when CFI_CLANG is not used. This then shows the callthunk for symbol 'name' as: __pfx_##name+0x6/0x10 Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Yujie Liu <yujie.liu@intel.com> Link: https://lkml.kernel.org/r/20221028194453.592512209@infradead.org
2022-10-26Merge branch 'dt/dtbo-rename' into dt/nextRob Herring1-1/+22
2022-10-26kbuild: Allow DTB overlays to built into .dtbo.S filesAndrew Davis1-1/+19
DTB files can be built into the kernel by converting them to assembly files then assembling them into object files. We extend this here for DTB overlays with the .dtso extensions. We change the start and end delimiting tag prefix to make it clear that this data came from overlay files. [Based on patch by Frank Rowand <frank.rowand@sony.com>] Signed-off-by: Andrew Davis <afd@ti.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Frank Rowand <frowand.list@gmail.com> Tested-by: Frank Rowand <frowand.list@gmail.com> Link: https://lore.kernel.org/r/20221024173434.32518-3-afd@ti.com Signed-off-by: Rob Herring <robh@kernel.org>
2022-10-26kbuild: Allow DTB overlays to built from .dtso named source filesAndrew Davis1-0/+3
Currently DTB Overlays (.dtbo) are build from source files with the same extension (.dts) as the base DTs (.dtb). This may become confusing and even lead to wrong results. For example, a composite DTB (created from a base DTB and a set of overlays) might have the same name as one of the overlays that create it. Different files should be generated from differently named sources. .dtb <-> .dts .dtbo <-> .dtso We do not remove the ability to compile DTBO files from .dts files here, only add a new rule allowing the .dtso file name. The current .dts named overlays can be renamed with time. After all have been renamed we can remove the other rule. Signed-off-by: Andrew Davis <afd@ti.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Frank Rowand <frowand.list@gmail.com> Tested-by: Frank Rowand <frowand.list@gmail.com> Link: https://lore.kernel.org/r/20221024173434.32518-2-afd@ti.com Signed-off-by: Rob Herring <robh@kernel.org>
2022-10-22scripts: dtc: only show unique unit address warning for enabled nodesAlexandre Torgue1-4/+8
In some cases an hardware peripheral can be used for two exclusive usages. For example, on STM32MP15 we have the same peripheral for I2S and SPI. We have dedicated driver for each usage and so a dedicated device node in devicetree. To avoid to get useless warnings running "make W=1 dtbs", this patch adds the "-Wunique_unit_address_if_enabled" flag for a make with W=1. In this case we will detect a duplicate address only if both devices are enabled in the devicetree, which is a real error case. Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Link: https://lore.kernel.org/r/20221021084447.5550-1-alexandre.torgue@foss.st.com [robh: Refactor options and keep 'unique_unit_address' for W=2] Signed-off-by: Rob Herring <robh@kernel.org>
2022-10-17objtool: Add --hacks=skylakePeter Zijlstra1-0/+1
Make the call/func sections selectable via the --hacks option. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20220915111146.120821440@infradead.org
2022-10-11Merge tag 'mm-stable-2022-10-08' of ↵Linus Torvalds1-0/+9
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - Yu Zhao's Multi-Gen LRU patches are here. They've been under test in linux-next for a couple of months without, to my knowledge, any negative reports (or any positive ones, come to that). - Also the Maple Tree from Liam Howlett. An overlapping range-based tree for vmas. It it apparently slightly more efficient in its own right, but is mainly targeted at enabling work to reduce mmap_lock contention. Liam has identified a number of other tree users in the kernel which could be beneficially onverted to mapletrees. Yu Zhao has identified a hard-to-hit but "easy to fix" lockdep splat at [1]. This has yet to be addressed due to Liam's unfortunately timed vacation. He is now back and we'll get this fixed up. - Dmitry Vyukov introduces KMSAN: the Kernel Memory Sanitizer. It uses clang-generated instrumentation to detect used-unintialized bugs down to the single bit level. KMSAN keeps finding bugs. New ones, as well as the legacy ones. - Yang Shi adds a userspace mechanism (madvise) to induce a collapse of memory into THPs. - Zach O'Keefe has expanded Yang Shi's madvise(MADV_COLLAPSE) to support file/shmem-backed pages. - userfaultfd updates from Axel Rasmussen - zsmalloc cleanups from Alexey Romanov - cleanups from Miaohe Lin: vmscan, hugetlb_cgroup, hugetlb and memory-failure - Huang Ying adds enhancements to NUMA balancing memory tiering mode's page promotion, with a new way of detecting hot pages. - memcg updates from Shakeel Butt: charging optimizations and reduced memory consumption. - memcg cleanups from Kairui Song. - memcg fixes and cleanups from Johannes Weiner. - Vishal Moola provides more folio conversions - Zhang Yi removed ll_rw_block() :( - migration enhancements from Peter Xu - migration error-path bugfixes from Huang Ying - Aneesh Kumar added ability for a device driver to alter the memory tiering promotion paths. For optimizations by PMEM drivers, DRM drivers, etc. - vma merging improvements from Jakub Matěn. - NUMA hinting cleanups from David Hildenbrand. - xu xin added aditional userspace visibility into KSM merging activity. - THP & KSM code consolidation from Qi Zheng. - more folio work from Matthew Wilcox. - KASAN updates from Andrey Konovalov. - DAMON cleanups from Kaixu Xia. - DAMON work from SeongJae Park: fixes, cleanups. - hugetlb sysfs cleanups from Muchun Song. - Mike Kravetz fixes locking issues in hugetlbfs and in hugetlb core. Link: https://lkml.kernel.org/r/CAOUHufZabH85CeUN-MEMgL8gJGzJEWUrkiM58JkTbBhh-jew0Q@mail.gmail.com [1] * tag 'mm-stable-2022-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (555 commits) hugetlb: allocate vma lock for all sharable vmas hugetlb: take hugetlb vma_lock when clearing vma_lock->vma pointer hugetlb: fix vma lock handling during split vma and range unmapping mglru: mm/vmscan.c: fix imprecise comments mm/mglru: don't sync disk for each aging cycle mm: memcontrol: drop dead CONFIG_MEMCG_SWAP config symbol mm: memcontrol: use do_memsw_account() in a few more places mm: memcontrol: deprecate swapaccounting=0 mode mm: memcontrol: don't allocate cgroup swap arrays when memcg is disabled mm/secretmem: remove reduntant return value mm/hugetlb: add available_huge_pages() func mm: remove unused inline functions from include/linux/mm_inline.h selftests/vm: add selftest for MADV_COLLAPSE of uffd-minor memory selftests/vm: add file/shmem MADV_COLLAPSE selftest for cleared pmd selftests/vm: add thp collapse shmem testing selftests/vm: add thp collapse file and tmpfs testing selftests/vm: modularize thp collapse memory operations selftests/vm: dedup THP helpers mm/khugepaged: add tracepoint to hpage_collapse_scan_file() mm/madvise: add file and shmem support to MADV_COLLAPSE ...
2022-10-10Merge tag 'devicetree-for-6.1' of ↵Linus Torvalds1-8/+6
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: "DT core: - Fix node refcounting in of_find_last_cache_level() - Constify device_node in of_device_compatible_match() - Fix 'dma-ranges' handling in bus controller nodes - Fix handling of initrd start > end - Improve error reporting in of_irq_init() - Taint kernel on DT unittest running - Use strscpy instead of strlcpy - Add a build target, dt_compatible_check, to check for compatible strings used in kernel sources against compatible strings in DT schemas. - Handle DT_SCHEMA_FILES changes when rebuilding DT bindings: - LED bindings for MT6370 PMIC - Convert Mediatek mtk-gce mailbox, MIPS CPU interrupt controller, mt7621 I2C, virtio,pci-iommu, nxp,tda998x, QCom fastrpc, qcom,pdc, and arm,versatile-sysreg to DT schema format - Add nvmem cells to u-boot,env schema - Add more LED_COLOR_ID definitions - Require 'opp-table' uses to be a node - Various schema fixes to match QEMU 'virt' DT usage - Tree wide dropping of redundant 'Device Tree Binding' in schema titles - More (unevaluated|additional)Properties fixes in schema child nodes - Drop various redundant minItems equal to maxItems" * tag 'devicetree-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (62 commits) of: base: Shift refcount decrement in of_find_last_cache_level() dt-bindings: leds: Add MediaTek MT6370 flashlight dt-bindings: leds: mt6370: Add MediaTek MT6370 current sink type LED indicator dt-bindings: mailbox: Convert mtk-gce to DT schema of: base: make of_device_compatible_match() accept const device node of: Fix "dma-ranges" handling for bus controllers of: fdt: Remove unused struct fdt_scan_status dt-bindings: display: st,stm32-dsi: Handle data-lanes in DSI port node dt-bindings: timer: Add power-domains for TI timer-dm on K3 dt: Add a check for undocumented compatible strings in kernel kbuild: take into account DT_SCHEMA_FILES changes while checking dtbs dt-bindings: interrupt-controller: migrate MIPS CPU interrupt controller text bindings to YAML dt-bindings: i2c: migrate mt7621 text bindings to YAML dt-bindings: power: gpcv2: correct patternProperties dt-bindings: virtio: Convert virtio,pci-iommu to DT schema dt-bindings: timer: arm,arch_timer: Allow dual compatible string dt-bindings: arm: cpus: Add kryo240 compatible dt-bindings: display: bridge: nxp,tda998x: Convert to json-schema dt-bindings: nvmem: u-boot,env: add basic NVMEM cells dt-bindings: remoteproc: qcom,adsp: enforce smd-edge schema ...
2022-10-10Merge tag 'kbuild-v6.1' of ↵Linus Torvalds1-15/+18
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Remove potentially incomplete targets when Kbuid is interrupted by SIGINT etc in case GNU Make may miss to do that when stderr is piped to another program. - Rewrite the single target build so it works more correctly. - Fix rpm-pkg builds with V=1. - List top-level subdirectories in ./Kbuild. - Ignore auto-generated __kstrtab_* and __kstrtabns_* symbols in kallsyms. - Avoid two different modules in lib/zstd/ having shared code, which potentially causes building the common code as build-in and modular back-and-forth. - Unify two modpost invocations to optimize the build process. - Remove head-y syntax in favor of linker scripts for placing particular sections in the head of vmlinux. - Bump the minimal GNU Make version to 3.82. - Clean up misc Makefiles and scripts. * tag 'kbuild-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (41 commits) docs: bump minimal GNU Make version to 3.82 ia64: simplify esi object addition in Makefile Revert "kbuild: Check if linker supports the -X option" kbuild: rebuild .vmlinux.export.o when its prerequisite is updated kbuild: move modules.builtin(.modinfo) rules to Makefile.vmlinux_o zstd: Fixing mixed module-builtin objects kallsyms: ignore __kstrtab_* and __kstrtabns_* symbols kallsyms: take the input file instead of reading stdin kallsyms: drop duplicated ignore patterns from kallsyms.c kbuild: reuse mksysmap output for kallsyms mksysmap: update comment about __crc_* kbuild: remove head-y syntax kbuild: use obj-y instead extra-y for objects placed at the head kbuild: hide error checker logs for V=1 builds kbuild: re-run modpost when it is updated kbuild: unify two modpost invocations kbuild: move vmlinux.o rule to the top Makefile kbuild: move .vmlinux.objs rule to Makefile.modpost kbuild: list sub-directories in ./Kbuild Makefile.compiler: replace cc-ifversion with compiler-specific macros ...
2022-10-04kmsan: add KMSAN runtime coreAlexander Potapenko1-0/+9
For each memory location KernelMemorySanitizer maintains two types of metadata: 1. The so-called shadow of that location - а byte:byte mapping describing whether or not individual bits of memory are initialized (shadow is 0) or not (shadow is 1). 2. The origins of that location - а 4-byte:4-byte mapping containing 4-byte IDs of the stack traces where uninitialized values were created. Each struct page now contains pointers to two struct pages holding KMSAN metadata (shadow and origins) for the original struct page. Utility routines in mm/kmsan/core.c and mm/kmsan/shadow.c handle the metadata creation, addressing, copying and checking. mm/kmsan/report.c performs error reporting in the cases an uninitialized value is used in a way that leads to undefined behavior. KMSAN compiler instrumentation is responsible for tracking the metadata along with the kernel memory. mm/kmsan/instrumentation.c provides the implementation for instrumentation hooks that are called from files compiled with -fsanitize=kernel-memory. To aid parameter passing (also done at instrumentation level), each task_struct now contains a struct kmsan_task_state used to track the metadata of function parameters and return values for that task. Finally, this patch provides CONFIG_KMSAN that enables KMSAN, and declares CFLAGS_KMSAN, which are applied to files compiled with KMSAN. The KMSAN_SANITIZE:=n Makefile directive can be used to completely disable KMSAN instrumentation for certain files. Similarly, KMSAN_ENABLE_CHECKS:=n disables KMSAN checks and makes newly created stack memory initialized. Users can also use functions from include/linux/kmsan-checks.h to mark certain memory regions as uninitialized or initialized (this is called "poisoning" and "unpoisoning") or check that a particular region is initialized. Link: https://lkml.kernel.org/r/20220915150417.722975-12-glider@google.com Signed-off-by: Alexander Potapenko <glider@google.com> Acked-by: Marco Elver <elver@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Eric Biggers <ebiggers@google.com> Cc: Eric Biggers <ebiggers@kernel.org> Cc: Eric Dumazet <edumazet@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Ilya Leoshkevich <iii@linux.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kees Cook <keescook@chromium.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vegard Nossum <vegard.nossum@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-28kbuild: list sub-directories in ./KbuildMasahiro Yamada1-0/+2
Use the ordinary obj-y syntax to list subdirectories. Note1: Previously, the link order of lib-y depended on CONFIG_MODULES; lib-y was linked before drivers-y when CONFIG_MODULES=y, otherwise after drivers-y. This was a bug of commit 7273ad2b08f8 ("kbuild: link lib-y objects to vmlinux forcibly when CONFIG_MODULES=y"), but it was not a big deal after all. Now, all objects listed in lib-y are linked last, irrespective of CONFIG_MODULES. Note2: Finally, the single target build in arch/*/lib/ works correctly. There was a bug report about this. [1] $ make ARCH=arm arch/arm/lib/findbit.o CALL scripts/checksyscalls.sh AS arch/arm/lib/findbit.o [1]: https://lore.kernel.org/linux-kbuild/YvUQOwL6lD4%2F5%2FU6@shell.armlinux.org.uk/ Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2022-09-28kbuild: use objtool-args-y to clean up objtool argumentsMasahiro Yamada1-15/+16
Based on Linus' patch. Refactor scripts/Makefile.vmlinux_o as well. Link: https://lore.kernel.org/lkml/CAHk-=wgjTMQgiKzBZTmb=uWGDEQxDdyF1+qxBkODYciuNsmwnw@mail.gmail.com/ Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
2022-09-28Kbuild: add Rust supportMiguel Ojeda1-0/+12
Having most of the new files in place, we now enable Rust support in the build system, including `Kconfig` entries related to Rust, the Rust configuration printer and a few other bits. Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com> Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com> Co-developed-by: Finn Behrens <me@kloenk.de> Signed-off-by: Finn Behrens <me@kloenk.de> Co-developed-by: Adam Bratschi-Kaye <ark.email@gmail.com> Signed-off-by: Adam Bratschi-Kaye <ark.email@gmail.com> Co-developed-by: Wedson Almeida Filho <wedsonaf@google.com> Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com> Co-developed-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Co-developed-by: Sven Van Asbroeck <thesven73@gmail.com> Signed-off-by: Sven Van Asbroeck <thesven73@gmail.com> Co-developed-by: Gary Guo <gary@garyguo.net> Signed-off-by: Gary Guo <gary@garyguo.net> Co-developed-by: Boris-Chengbiao Zhou <bobo1239@web.de> Signed-off-by: Boris-Chengbiao Zhou <bobo1239@web.de> Co-developed-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Co-developed-by: Douglas Su <d0u9.su@outlook.com> Signed-off-by: Douglas Su <d0u9.su@outlook.com> Co-developed-by: Dariusz Sosnowski <dsosnowski@dsosnowski.pl> Signed-off-by: Dariusz Sosnowski <dsosnowski@dsosnowski.pl> Co-developed-by: Antonio Terceiro <antonio.terceiro@linaro.org> Signed-off-by: Antonio Terceiro <antonio.terceiro@linaro.org> Co-developed-by: Daniel Xu <dxu@dxuuu.xyz> Signed-off-by: Daniel Xu <dxu@dxuuu.xyz> Co-developed-by: Björn Roy Baron <bjorn3_gh@protonmail.com> Signed-off-by: Björn Roy Baron <bjorn3_gh@protonmail.com> Co-developed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com> Signed-off-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com> Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2022-09-27kbuild: take into account DT_SCHEMA_FILES changes while checking dtbsDmitry Baryshkov1-8/+6
It is useful to be able to recheck dtbs files against a limited set of DT schema files. This can be accomplished by using differnt DT_SCHEMA_FILES argument values while rerunning make dtbs_check. However for some reason if_changed_rule doesn't pick up the rule_dtc changes (and doesn't retrigger the build). Fix this by changing if_changed_rule to if_changed_dep and squashing DTC and dt-validate into a single new command. Then if_changed_dep triggers on DT_SCHEMA_FILES changes and reruns the build/check. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220915114422.79378-1-dmitry.baryshkov@linaro.org Signed-off-by: Rob Herring <robh@kernel.org>
2022-06-29x86/retbleed: Add fine grained Kconfig knobsPeter Zijlstra1-0/+1
Do fine-grained Kconfig for all the various retbleed parts. NOTE: if your compiler doesn't support return thunks this will silently 'upgrade' your mitigation to IBPB, you might not like this. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Borislav Petkov <bp@suse.de>
2022-06-05Merge tag 'objtool-urgent-2022-06-05' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool fixes from Thomas Gleixner: - Handle __ubsan_handle_builtin_unreachable() correctly and treat it as noreturn - Allow architectures to select uaccess validation - Use the non-instrumented bit test for test_cpu_has() to prevent escape from non-instrumentable regions - Use arch_ prefixed atomics for JUMP_LABEL=n builds to prevent escape from non-instrumentable regions - Mark a few tiny inline as __always_inline to prevent GCC from bringing them out of line and instrumenting them - Mark the empty stub context_tracking_enabled() as always inline as GCC brings them out of line and instruments the empty shell - Annotate ex_handler_msr_mce() as dead end * tag 'objtool-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/extable: Annotate ex_handler_msr_mce() as a dead end context_tracking: Always inline empty stubs x86: Always inline on_thread_stack() and current_top_of_stack() jump_label,noinstr: Avoid instrumentation for JUMP_LABEL=n builds x86/cpu: Elide KCSAN for cpu_has() and friends objtool: Mark __ubsan_handle_builtin_unreachable() as noreturn objtool: Add CONFIG_HAVE_UACCESS_VALIDATION
2022-06-05kbuild: factor out the common objtool argumentsMasahiro Yamada1-0/+26
scripts/Makefile.build and scripts/link-vmlinux.sh have similar setups for the objtool arguments. It was difficult to factor out them because all the vmlinux build rules were written in a shell script. It is somewhat tedious to touch the two files every time a new objtool option is supported. To reduce the code duplication, move the objtool for vmlinux.o into scripts/Makefile.vmlinux_o. Then, move the common macros to Makefile.lib so they are shared between Makefile.build and Makefile.vmlinux_o. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM-14 (x86-64)
2022-05-29kbuild: do not create *.prelink.o for Clang LTO or IBTMasahiro Yamada1-7/+0
When CONFIG_LTO_CLANG=y, additional intermediate *.prelink.o is created for each module. Also, objtool is postponed until LLVM IR is converted to ELF. CONFIG_X86_KERNEL_IBT works in a similar way to postpone objtool until objects are merged together. This commit stops generating *.prelink.o, so the build flow will look similar with/without LTO. The following figures show how the LTO build currently works, and how this commit is changing it. Current build flow ================== [1] single-object module $(LD) $(CC) +objtool $(LD) foo.c --------------------> foo.o -----> foo.prelink.o -----> foo.ko (LLVM IR) (ELF) | (ELF) | foo.mod.o --/ (LLVM IR) [2] multi-object module $(LD) $(CC) $(AR) +objtool $(LD) foo1.c -----> foo1.o -----> foo.o -----> foo.prelink.o -----> foo.ko | (archive) (ELF) | (ELF) foo2.c -----> foo2.o --/ | (LLVM IR) foo.mod.o --/ (LLVM IR) One confusion is that foo.o in multi-object module is an archive despite of its suffix. New build flow ============== [1] single-object module Since there is only one object, there is no need to keep the LLVM IR. Use $(CC)+$(LD) to generate an ELF object in one build rule. When LTO is disabled, $(LD) is unneeded because $(CC) produces an ELF object. $(CC)+$(LD)+objtool $(LD) foo.c ----------------------------> foo.o ---------> foo.ko (ELF) | (ELF) | foo.mod.o --/ (LLVM IR) [2] multi-object module Previously, $(AR) was used to combine LLVM IR files into an archive, but there was no technical reason to do so. Use $(LD) to merge them into a single ELF object. $(LD) $(CC) +objtool $(LD) foo1.c ---------> foo1.o ---------> foo.o ---------> foo.ko | (ELF) | (ELF) foo2.c ---------> foo2.o ----/ | (LLVM IR) foo.mod.o --/ (LLVM IR) Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu> Tested-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Sami Tolvanen <samitolvanen@google.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM-14 (x86-64) Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
2022-05-07kbuild: make multi_depend work with targets in subdirectoryMasahiro Yamada1-3/+3
Precisely speaking, when you get the stem of the path, you should use $(patsubst $(obj)/%,%,...) instead of $(notdir ...). I do not see this usecase, but if you create a composite object in a subdirectory, the Makefile should look like this: obj-$(CONFIG_FOO) += dir/foo.o dir/foo-objs := dir/foo1.o dir/foo2.o The member objects should be assigned to dir/foo-objs instead of foo-objs. This syntax is more consistent with commit 54b8ae66ae1a ("kbuild: change *FLAGS_<basetarget>.o to take the path relative to $(obj)"). Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
2022-05-07kbuild: reuse suffix-search to refactor multi_dependMasahiro Yamada1-1/+1
The complicated part of multi_depend is the same as suffix-search. Reuse it. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
2022-03-31Merge tag 'kbuild-v5.18-v2' of ↵Linus Torvalds1-10/+6
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Add new environment variables, USERCFLAGS and USERLDFLAGS to allow additional flags to be passed to user-space programs. - Fix missing fflush() bugs in Kconfig and fixdep - Fix a minor bug in the comment format of the .config file - Make kallsyms ignore llvm's local labels, .L* - Fix UAPI compile-test for cross-compiling with Clang - Extend the LLVM= syntax to support LLVM=<suffix> form for using a particular version of LLVm, and LLVM=<prefix> form for using custom LLVM in a particular directory path. - Clean up Makefiles * tag 'kbuild-v5.18-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: Make $(LLVM) more flexible kbuild: add --target to correctly cross-compile UAPI headers with Clang fixdep: use fflush() and ferror() to ensure successful write to files arch: syscalls: simplify uapi/kapi directory creation usr/include: replace extra-y with always-y certs: simplify empty certs creation in certs/Makefile certs: include certs/signing_key.x509 unconditionally kallsyms: ignore all local labels prefixed by '.L' kconfig: fix missing '# end of' for empty menu kconfig: add fflush() before ferror() check kbuild: replace $(if A,A,B) with $(or A,B) kbuild: Add environment variables for userprogs flags kbuild: unify cmd_copy and cmd_shipped
2022-03-27Merge tag 'x86_core_for_5.18_rc1' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 CET-IBT (Control-Flow-Integrity) support from Peter Zijlstra: "Add support for Intel CET-IBT, available since Tigerlake (11th gen), which is a coarse grained, hardware based, forward edge Control-Flow-Integrity mechanism where any indirect CALL/JMP must target an ENDBR instruction or suffer #CP. Additionally, since Alderlake (12th gen)/Sapphire-Rapids, speculation is limited to 2 instructions (and typically fewer) on branch targets not starting with ENDBR. CET-IBT also limits speculation of the next sequential instruction after the indirect CALL/JMP [1]. CET-IBT is fundamentally incompatible with retpolines, but provides, as described above, speculation limits itself" [1] https://www.intel.com/content/www/us/en/developer/articles/technical/software-security-guidance/technical-documentation/branch-history-injection.html * tag 'x86_core_for_5.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits) kvm/emulate: Fix SETcc emulation for ENDBR x86/Kconfig: Only allow CONFIG_X86_KERNEL_IBT with ld.lld >= 14.0.0 x86/Kconfig: Only enable CONFIG_CC_HAS_IBT for clang >= 14.0.0 kbuild: Fixup the IBT kbuild changes x86/Kconfig: Do not allow CONFIG_X86_X32_ABI=y with llvm-objcopy x86: Remove toolchain check for X32 ABI capability x86/alternative: Use .ibt_endbr_seal to seal indirect calls objtool: Find unused ENDBR instructions objtool: Validate IBT assumptions objtool: Add IBT/ENDBR decoding objtool: Read the NOENDBR annotation x86: Annotate idtentry_df() x86,objtool: Move the ASM_REACHABLE annotation to objtool.h x86: Annotate call_on_stack() objtool: Rework ASM_REACHABLE x86: Mark __invalid_creds() __noreturn exit: Mark do_group_exit() __noreturn x86: Mark stop_this_cpu() __noreturn objtool: Ignore extra-symbol code objtool: Rename --duplicate to --lto ...
2022-03-22kbuild: Fixup the IBT kbuild changesPeter Zijlstra1-2/+2
Masahiro-san deemed my kbuild changes to support whole module objtool runs too terrible to live and gracefully provided an alternative. Suggested-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/CAK7LNAQ2mYMnOKMQheVi+6byUFE3KEkjm1zcndNUfe0tORGvug@mail.gmail.com
2022-03-11dt-bindings: kbuild: Use DTB files for validationRob Herring1-13/+7
Switch the DT validation to use DTB files directly instead of a DTS to YAML conversion. The original motivation for supporting validation on DTB files was to enable running validation on a running system (e.g. 'dt-validate /sys/firmware/fdt') or other cases where the original source DTS is not available. The YAML format was not without issues. Using DTBs with the schema type information solves some of those problems. The YAML format relies on the DTS source level information including bracketing of properties, size directives, and phandle tags all of which are lost in a DTB file. While standardizing the bracketing is a good thing, it does cause a lot of extra warnings and churn to fix them. Another issue has been signed types are not validated correctly as sign information is not propagated to YAML. Using the schema type information allows for proper handling of signed types. YAML also can't represent the full range of 64-bit integers as numbers are stored as floats by most/all parsers. The DTB validation works by decoding property values using the type information in the schemas themselves. The main corner case this does not work for is matrix types where neither dimension is fixed. For now, checking the dimensions in these cases are skipped. Signed-off-by: Rob Herring <robh@kernel.org> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20220310160513.1708182-3-robh@kernel.org
2022-03-11dt-bindings: kbuild: Pass DT_SCHEMA_FILES to dt-validateRob Herring1-3/+2
In preparation for supporting validation of DTB files, the full processed schema will always be needed in order to extract type information from it. Therefore, the processed schema containing only what DT_SCHEMA_FILES specifies won't work. Instead, dt-validate has gained an option, -l or --limit, to specify which schema(s) to use for validation. As the command line option is new, we the minimum dtschema version must be updated. Cc: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220310160513.1708182-2-robh@kernel.org
2022-02-15kbuild: replace $(if A,A,B) with $(or A,B)Masahiro Yamada1-2/+2
$(or ...) is available since GNU Make 3.81, and useful to shorten the code in some places. Covert as follows: $(if A,A,B) --> $(or A,B) This patch also converts: $(if A, A, B) --> $(or A, B) Strictly speaking, the latter is not an equivalent conversion because GNU Make keeps spaces after commas; if A is not empty, $(if A, A, B) expands to " A", while $(or A, B) expands to "A". Anyway, preceding spaces are not significant in the code hunks I touched. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2022-02-14kbuild: unify cmd_copy and cmd_shippedMasahiro Yamada1-8/+4
cmd_copy and cmd_shipped have similar functionality. The difference is that cmd_copy uses 'cp' while cmd_shipped 'cat'. Unify them into cmd_copy because this macro name is more intuitive. Going forward, cmd_copy will use 'cat' to avoid the permission issue. I also thought of 'cp --no-preserve=mode' but this option is not mentioned in the POSIX spec [1], so I am keeping the 'cat' command. [1]: https://pubs.opengroup.org/onlinepubs/009695299/utilities/cp.html Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Gabriel Krisman Bertazi <krisman@collabora.com>
2022-01-19Merge tag 'kbuild-v5.17' of ↵Linus Torvalds1-7/+28
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Add new kconfig target 'make mod2noconfig', which will be useful to speed up the build and test iteration. - Raise the minimum supported version of LLVM to 11.0.0 - Refactor certs/Makefile - Change the format of include/config/auto.conf to stop double-quoting string type CONFIG options. - Fix ARCH=sh builds in dash - Separate compression macros for general purposes (cmd_bzip2 etc.) and the ones for decompressors (cmd_bzip2_with_size etc.) - Misc Makefile cleanups * tag 'kbuild-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits) kbuild: add cmd_file_size arch: decompressor: remove useless vmlinux.bin.all-y kbuild: rename cmd_{bzip2,lzma,lzo,lz4,xzkern,zstd22} kbuild: drop $(size_append) from cmd_zstd sh: rename suffix-y to suffix_y doc: kbuild: fix default in `imply` table microblaze: use built-in function to get CPU_{MAJOR,MINOR,REV} certs: move scripts/extract-cert to certs/ kbuild: do not quote string values in include/config/auto.conf kbuild: do not include include/config/auto.conf from shell scripts certs: simplify $(srctree)/ handling and remove config_filename macro kbuild: stop using config_filename in scripts/Makefile.modsign certs: remove misleading comments about GCC PR certs: refactor file cleaning certs: remove unneeded -I$(srctree) option for system_certificates.o certs: unify duplicated cmd_extract_certs and improve the log certs: use $< and $@ to simplify the key generation rule kbuild: remove headers_check stub kbuild: move headers_check.pl to usr/include/ certs: use if_changed to re-generate the key when the key type is changed ...
2022-01-13kbuild: add cmd_file_sizeMasahiro Yamada1-0/+3
Some architectures support self-extracting kernel, which embeds the compressed vmlinux. It has 4 byte data at the end so the decompressor can know the vmlinux size beforehand. GZIP natively has it in the trailer, but for the other compression algorithms, the hand-crafted trailer is added. It is unneeded to generate such _corrupted_ compressed files because it is possible to pass the size data as a separate file. For example, the assembly code: .incbin "compressed-vmlinux-with-size-data" can be transformed to: .incbin "compressed-vmlinux" .incbin "size-data" My hope is, after some reworks of the decompressors, the macros cmd_{bzip2,lzma,lzo,lz4,xzkern,zstd22}_with_size will go away. This new macro, cmd_file_size, will be useful to generate a separate size-data file. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <n.schier@avm.de>
2022-01-13kbuild: rename cmd_{bzip2,lzma,lzo,lz4,xzkern,zstd22}Masahiro Yamada1-6/+24
GZIP-compressed files end with 4 byte data that represents the size of the original input. The decompressors (the self-extracting kernel) exploit it to know the vmlinux size beforehand. To mimic the GZIP's trailer, Kbuild provides cmd_{bzip2,lzma,lzo,lz4,xzkern,zstd22}. Unfortunately these macros are used everywhere despite the appended size data is only useful for the decompressors. There is no guarantee that such hand-crafted trailers are safely ignored. In fact, the kernel refuses compressed initramdfs with the garbage data. That is why usr/Makefile overrides size_append to make it no-op. To limit the use of such broken compressed files, this commit renames the existing macros as follows: cmd_bzip2 --> cmd_bzip2_with_size cmd_lzma --> cmd_lzma_with_size cmd_lzo --> cmd_lzo_with_size cmd_lz4 --> cmd_lz4_with_size cmd_xzkern --> cmd_xzkern_with_size cmd_zstd22 --> cmd_zstd22_with_size To keep the decompressors working, I updated the following Makefiles accordingly: arch/arm/boot/compressed/Makefile arch/h8300/boot/compressed/Makefile arch/mips/boot/compressed/Makefile arch/parisc/boot/compressed/Makefile arch/s390/boot/compressed/Makefile arch/sh/boot/compressed/Makefile arch/x86/boot/compressed/Makefile I reused the current macro names for the normal usecases; they produce the compressed data in the proper format. I did not touch the following: arch/arc/boot/Makefile arch/arm64/boot/Makefile arch/csky/boot/Makefile arch/mips/boot/Makefile arch/riscv/boot/Makefile arch/sh/boot/Makefile kernel/Makefile This means those Makefiles will stop appending the size data. I dropped the 'override size_append' hack from usr/Makefile. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <n.schier@avm.de>
2022-01-13kbuild: drop $(size_append) from cmd_zstdMasahiro Yamada1-1/+1
The appended file size is only used by the decompressors, which some architectures support. As the comment "zstd22 is used for kernel compression" says, cmd_zstd22 is used in arch/{mips,s390,x86}/boot/compressed/Makefile. On the other hand, there is no good reason to append the file size to cmd_zstd since it is used for other purposes. Actually cmd_zstd is only used in usr/Makefile, where the appended file size is rather harmful. The initramfs with its file size appended is considered as corrupted data, so commit 65e00e04e5ae ("initramfs: refactor the initramfs build rules") added 'override size_append := :' to make it no-op. As a conclusion, this $(size_append) should not exist here. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <n.schier@avm.de>
2021-12-10kcsan, kbuild: Add option for barrier instrumentation onlyMarco Elver1-0/+5
Source files that disable KCSAN via KCSAN_SANITIZE := n, remove all instrumentation, including explicit barrier instrumentation. With instrumentation for memory barriers, in few places it is required to enable just the explicit instrumentation for memory barriers to avoid false positives. Providing the Makefile variable KCSAN_INSTRUMENT_BARRIERS_obj.o or KCSAN_INSTRUMENT_BARRIERS (for all files) set to 'y' only enables the explicit barrier instrumentation. Signed-off-by: Marco Elver <elver@google.com> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-11-08Merge tag 'kbuild-v5.16' of ↵Linus Torvalds1-11/+0
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Remove the global -isystem compiler flag, which was made possible by the introduction of <linux/stdarg.h> - Improve the Kconfig help to print the location in the top menu level - Fix "FORCE prerequisite is missing" build warning for sparc - Add new build targets, tarzst-pkg and perf-tarzst-src-pkg, which generate a zstd-compressed tarball - Prevent gen_init_cpio tool from generating a corrupted cpio when KBUILD_BUILD_TIMESTAMP is set to 2106-02-07 or later - Misc cleanups * tag 'kbuild-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (28 commits) kbuild: use more subdir- for visiting subdirectories while cleaning sh: remove meaningless archclean line initramfs: Check timestamp to prevent broken cpio archive kbuild: split DEBUG_CFLAGS out to scripts/Makefile.debug gen_init_cpio: add static const qualifiers kbuild: Add make tarzst-pkg build option scripts: update the comments of kallsyms support sparc: Add missing "FORCE" target when using if_changed kconfig: refactor conf_touch_dep() kconfig: refactor conf_write_dep() kconfig: refactor conf_write_autoconf() kconfig: add conf_get_autoheader_name() kconfig: move sym_escape_string_value() to confdata.c kconfig: refactor listnewconfig code kconfig: refactor conf_write_symbol() kconfig: refactor conf_write_heading() kconfig: remove 'const' from the return type of sym_escape_string_value() kconfig: rename a variable in the lexer to a clearer name kconfig: narrow the scope of variables in the lexer kconfig: Create links to main menu items in search ...
2021-09-22kbuild: move objtool_args back to scripts/Makefile.buildMasahiro Yamada1-11/+0
Commit b1a1a1a09b46 ("kbuild: lto: postpone objtool") moved objtool_args to Makefile.lib, so the arguments can be used in Makefile.modfinal as well as Makefile.build. With commit 850ded46c642 ("kbuild: Fix TRIM_UNUSED_KSYMS with LTO_CLANG"), module LTO linking came back to scripts/Makefile.build again. So, there is no more reason to keep objtool_args in a separate file. Get it back to the original place, close to the objtool command. Remove the stale comment too. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
2021-09-21kbuild: Enable dtc 'unit_address_format' warning by defaultRob Herring1-1/+0
With all the 'unit_address_format' warnings fixed, enable the warning by default. Cc: Michal Marek <michal.lkml@markovi.net> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: linux-kbuild@vger.kernel.org Acked-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Nick Desaulniers <ndesaulniers@google.com> Link: https://lore.kernel.org/r/20210913192816.1225025-9-robh@kernel.org
2021-09-04Merge tag 'kbuild-v5.15' of ↵Linus Torvalds1-6/+12
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Add -s option (strict mode) to merge_config.sh to make it fail when any symbol is redefined. - Show a warning if a different compiler is used for building external modules. - Infer --target from ARCH for CC=clang to let you cross-compile the kernel without CROSS_COMPILE. - Make the integrated assembler default (LLVM_IAS=1) for CC=clang. - Add <linux/stdarg.h> to the kernel source instead of borrowing <stdarg.h> from the compiler. - Add Nick Desaulniers as a Kbuild reviewer. - Drop stale cc-option tests. - Fix the combination of CONFIG_TRIM_UNUSED_KSYMS and CONFIG_LTO_CLANG to handle symbols in inline assembly. - Show a warning if 'FORCE' is missing for if_changed rules. - Various cleanups * tag 'kbuild-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (39 commits) kbuild: redo fake deps at include/ksym/*.h kbuild: clean up objtool_args slightly modpost: get the *.mod file path more simply checkkconfigsymbols.py: Fix the '--ignore' option kbuild: merge vmlinux_link() between ARCH=um and other architectures kbuild: do not remove 'linux' link in scripts/link-vmlinux.sh kbuild: merge vmlinux_link() between the ordinary link and Clang LTO kbuild: remove stale *.symversions kbuild: remove unused quiet_cmd_update_lto_symversions gen_compile_commands: extract compiler command from a series of commands x86: remove cc-option-yn test for -mtune= arc: replace cc-option-yn uses with cc-option s390: replace cc-option-yn uses with cc-option ia64: move core-y in arch/ia64/Makefile to arch/ia64/Kbuild sparc: move the install rule to arch/sparc/Makefile security: remove unneeded subdir-$(CONFIG_...) kbuild: sh: remove unused install script kbuild: Fix 'no symbols' warning when CONFIG_TRIM_UNUSD_KSYMS=y kbuild: Switch to 'f' variants of integrated assembler flag kbuild: Shuffle blank line to improve comment meaning ...
2021-09-03kbuild: clean up objtool_args slightlyMasahiro Yamada1-6/+5
The code: $(if $(or $(CONFIG_GCOV_KERNEL),$(CONFIG_LTO_CLANG)), ...) ... can be simpled to: $(if $(CONFIG_GCOV_KERNEL)$(CONFIG_LTO_CLANG), ...) Also, remove meaningless commas at the end of $(if ...). Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-09-03kbuild: Fix TRIM_UNUSED_KSYMS with LTO_CLANGSami Tolvanen1-0/+7
With CONFIG_LTO_CLANG, we currently link modules into native code just before modpost, which means with TRIM_UNUSED_KSYMS enabled, we still look at the LLVM bitcode in the .o files when generating the list of used symbols. As the bitcode doesn't yet have calls to compiler intrinsics and llvm-nm doesn't see function references that only exist in function-level inline assembly, we currently need a whitelist for TRIM_UNUSED_KSYMS to work with LTO. This change moves module LTO linking to happen earlier, and thus avoids the issue with LLVM bitcode and TRIM_UNUSED_KSYMS entirely, allowing us to also drop the whitelist from gen_autoksyms.sh. Link: https://github.com/ClangBuiltLinux/linux/issues/1369 Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Reviewed-by: Alexander Lobakin <alobakin@pm.me> Tested-by: Alexander Lobakin <alobakin@pm.me> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-08-23kbuild: Enable dtc 'pci_device_reg' warning by defaultRob Herring1-2/+1
There's only a couple of instances of the 'pci_device_reg' warnings left and they look legit, so let's enable the warning by default. Cc: Heiko Stuebner <heiko@sntech.de> Cc: Nicolas Saenz Julienne <nsaenz@kernel.org> Cc: soc@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210820165011.3257112-1-robh@kernel.org/
2021-05-05kbuild: refactor modname-multi by using suffix-searchMasahiro Yamada1-1/+1
Improve the readability slightly. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-05-05kbuild: refactor fdtoverlay ruleMasahiro Yamada1-18/+15
Rename overlay-y to multi-dtb-y, which is a consistent name with multi-obj-y. Also, use multi-search to avoid code duplication. Introduce real-dtb-y, which is a consistent name with real-obj-y, to contain primitive blobs compiled from *.dts. This is used to calculate the list of *.dt.yaml files. Set -@ to base DTB without using $(eval ). Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-05-05kbuild: parameterize the .o part of suffix-searchMasahiro Yamada1-8/+11
The suffix-search macro hard-codes the suffix, '.o'. Make it a parameter so that the multi-search and real-search macros can be reused for foo-dtbs syntax introduced by commit 15d16d6dadf6 ("kbuild: Add generic rule to apply fdtoverlay"). Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-05-01kbuild: add comment about why cmd_shipped uses 'cat'Masahiro Yamada1-0/+3
cmd_shipped uses 'cat' instead of 'cp' for copying a file. The reason is explained in the commit [1], but it was in the pre-git era. $ touch a $ chmod -w a $ cp a b $ cp a b cp: cannot create regular file 'b': Permission denied Add comments so that you can see the reason without looking into the history. [1]: https://git.kernel.org/pub/scm/linux/kernel/git/history/history.git/commit/?id=a70dba8086160449cc94c5bdaff78419b6b8e3c8 Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-04-30Merge tag 'kbuild-v5.13' of ↵Linus Torvalds1-8/+8
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Evaluate $(call cc-option,...) etc. only for build targets - Add CONFIG_VMLINUX_MAP to generate .map file when linking vmlinux - Remove unnecessary --gcc-toolchains Clang flag because the --prefix flag finds the toolchains - Do not pass Clang's --prefix flag when using the integrated as - Check the assembler version in Kconfig time - Add new CONFIG options, AS_VERSION, AS_IS_GNU, AS_IS_LLVM to clean up some dependencies in Kconfig - Fix invalid Module.symvers creation when building only modules without vmlinux - Fix false-positive modpost warnings when CONFIG_TRIM_UNUSED_KSYMS is set, but there is no module to build - Refactor module installation Makefile - Support zstd for module compression - Convert alpha and ia64 to use generic shell scripts to generate the syscall headers - Add a new elfnote to indicate if the kernel was built with LTO, which will be used by pahole - Flatten the directory structure under include/config/ so CONFIG options and filenames match - Change the deb source package name from linux-$(KERNELRELEASE) to linux-upstream * tag 'kbuild-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (42 commits) kbuild: Add $(KBUILD_HOSTLDFLAGS) to 'has_libelf' test kbuild: deb-pkg: change the source package name to linux-upstream tools: do not include scripts/Kbuild.include kbuild: redo fake deps at include/config/*.h kbuild: remove TMPO from try-run MAINTAINERS: add pattern for dummy-tools kbuild: add an elfnote for whether vmlinux is built with lto ia64: syscalls: switch to generic syscallhdr.sh ia64: syscalls: switch to generic syscalltbl.sh alpha: syscalls: switch to generic syscallhdr.sh alpha: syscalls: switch to generic syscalltbl.sh sysctl: use min() helper for namecmp() kbuild: add support for zstd compressed modules kbuild: remove CONFIG_MODULE_COMPRESS kbuild: merge scripts/Makefile.modsign to scripts/Makefile.modinst kbuild: move module strip/compression code into scripts/Makefile.modinst kbuild: refactor scripts/Makefile.modinst kbuild: rename extmod-prefix to extmod_prefix kbuild: check module name conflict for external modules as well kbuild: show the target directory for depmod log ...