summaryrefslogtreecommitdiff
path: root/scripts
AgeCommit message (Collapse)AuthorFilesLines
2016-10-06Merge tag 'trace-v4.9' of ↵Linus Torvalds1-0/+115
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: "This release cycle is rather small. Just a few fixes to tracing. The big change is the addition of the hwlat tracer. It not only detects SMIs, but also other latency that's caused by the hardware. I have detected some latency from large boxes having bus contention" * tag 'trace-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Call traceoff trigger after event is recorded ftrace/scripts: Add helper script to bisect function tracing problem functions tracing: Have max_latency be defined for HWLAT_TRACER as well tracing: Add NMI tracing in hwlat detector tracing: Have hwlat trace migrate across tracing_cpumask CPUs tracing: Add documentation for hwlat_detector tracer tracing: Added hardware latency tracer ftrace: Access ret_stack->subtime only in the function profiler function_graph: Handle TRACE_BPUTS in print_graph_comment tracing/uprobe: Drop isdigit() check in create_trace_uprobe
2016-10-05Merge branch 'for-linus' of ↵Linus Torvalds1-1/+4
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Martin Schwidefsky: "The new features and main improvements in this merge for v4.9 - Support for the UBSAN sanitizer - Set HAVE_EFFICIENT_UNALIGNED_ACCESS, it improves the code in some places - Improvements for the in-kernel fpu code, in particular the overhead for multiple consecutive in kernel fpu users is recuded - Add a SIMD implementation for the RAID6 gen and xor operations - Add RAID6 recovery based on the XC instruction - The PCI DMA flush logic has been improved to increase the speed of the map / unmap operations - The time synchronization code has seen some updates And bug fixes all over the place" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (48 commits) s390/con3270: fix insufficient space padding s390/con3270: fix use of uninitialised data MAINTAINERS: update DASD maintainer s390/cio: fix accidental interrupt enabling during resume s390/dasd: add missing \n to end of dev_err messages s390/config: Enable config options for Docker s390/dasd: make query host access interruptible s390/dasd: fix panic during offline processing s390/dasd: fix hanging offline processing s390/pci_dma: improve lazy flush for unmap s390/pci_dma: split dma_update_trans s390/pci_dma: improve map_sg s390/pci_dma: simplify dma address calculation s390/pci_dma: remove dma address range check iommu/s390: simplify registration of I/O address translation parameters s390: migrate exception table users off module.h and onto extable.h s390: export header for CLP ioctl s390/vmur: fix irq pointer dereference in int handler s390/dasd: add missing KOBJ_CHANGE event for unformatted devices s390: enable UBSAN ...
2016-10-04Merge tag 'docs-4.9' of git://git.lwn.net/linuxLinus Torvalds1-16/+32
Pull documentation updates from Jonathan Corbet: "This is the documentation update pull for the 4.9 merge window. The Sphinx transition is still creating a fair amount of work. Here we have a number of fixes and, importantly, a proper PDF output solution, thanks to Jani Nikula, Mauro Carvalho Chehab and Markus Heiser. I've started a couple of new books: a driver API book (based on the old device-drivers.tmpl) and a development tools book. Both are meant to show how we can integrate together our existing documentation into a more coherent and accessible whole. It involves moving some stuff around and formatting changes, but, I think, the results are worth it. The good news is that most of our existing Documentation/*.txt files are *almost* in RST format already; the amount of messing around required is minimal. And, of course, there's the usual set of updates, typo fixes, and more" * tag 'docs-4.9' of git://git.lwn.net/linux: (120 commits) URL changed for Linux Foundation TAB dax : Fix documentation with respect to struct pages iio: Documentation: Correct the path used to create triggers. docs: Remove space-before-label guidance from CodingStyle docs-rst: add inter-document cross references Documentation/email-clients.txt: convert it to ReST markup Documentation/kernel-docs.txt: reorder based on timestamp Documentation/kernel-docs.txt: Add dates for online docs Documentation/kernel-docs.txt: get rid of broken docs Documentation/kernel-docs.txt: move in-kernel docs Documentation/kernel-docs.txt: remove more legacy references Documentation/kernel-docs.txt: add two published books Documentation/kernel-docs.txt: sort books per publication date Documentation/kernel-docs.txt: adjust LDD references Documentation/kernel-docs.txt: some improvements on the ReST output Documentation/kernel-docs.txt: Consistent indenting: 4 spaces Documentation/kernel-docs.txt: Add 4 paper/book references Documentation/kernel-docs.txt: Improve layouting of book list Documentation/kernel-docs.txt: Remove offline or outdated entries docs: Clean up bare :: lines ...
2016-10-04Merge tag 'char-misc-4.9-rc1' of ↵Linus Torvalds2-346/+252
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here's the "big" char and misc driver update for 4.9-rc1. Lots of little things here, all over the driver tree for subsystems that flow through me. Nothing major that I can discern, full details are in the shortlog. All have been in the linux-next tree with no reported issues" * tag 'char-misc-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (144 commits) drivers/misc/hpilo: Changes to support new security states in iLO5 FW at25: fix debug and error messaging misc/genwqe: ensure zero initialization vme: fake: remove unexpected unlock in fake_master_set() vme: fake: mark symbols static where possible spmi: pmic-arb: Return an error code if sanity check fails Drivers: hv: get rid of id in struct vmbus_channel Drivers: hv: make VMBus bus ids persistent mcb: Add a dma_device to mcb_device mcb: Enable PCI bus mastering by default mei: stop the stall timer worker if not needed clk: probe common clock drivers earlier vme: fake: fix build for 64-bit dma_addr_t ttyprintk: Neaten and simplify printing mei: me: add kaby point device ids coresight: tmc: mark symbols static where possible coresight: perf: deal with error condition properly Drivers: hv: hv_util: Avoid dynamic allocation in time synch fpga manager: Add hardware dependency to Zynq driver Drivers: hv: utils: Support TimeSync version 4.0 protocol samples. ...
2016-09-29scripts/recordmcount.c: account for .softirqentry.textDmitry Vyukov2-0/+2
be7635e7287e ("arch, ftrace: for KASAN put hard/soft IRQ entries into separate sections") added .softirqentry.text section, but it was not added to recordmcount. So functions in the section are untracable. Add the section to scripts/recordmcount.c and scripts/recordmcount.pl. Fixes: be7635e7287e ("arch, ftrace: for KASAN put hard/soft IRQ entries into separate sections") Link: http://lkml.kernel.org/r/1474902626-73468-1-git-send-email-dvyukov@google.com Signed-off-by: Dmitry Vyukov <dvyukov@google.com> Acked-by: Steve Rostedt <rostedt@goodmis.org> Cc: <stable@vger.kernel.org> [4.6+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-09-21ftrace/scripts: Add helper script to bisect function tracing problem functionsSteven Rostedt (Red Hat)1-0/+115
Every so often, with a special config or a architecture change, running function or function_graph tracing can cause the machien to hard reboot, crash, or simply hard lockup. There's some functions in the function graph tracer that can not be traced otherwise it causes the function tracer to recurse before the recursion protection mechanisms are in place. When this occurs, using the dynamic ftrace featuer that allows limiting what actually gets traced can be used to bisect down to the problem function. This adds a script that helps with this process in the scripts/tracing directory, called ftrace-bisect.sh The set up is to read all the functions that can be traced from available_filter_functions into a file (full_file). Then run this script passing it the full_file and a "test_file" and "non_test_file", where the test_file will be add to set_ftrace_filter. What ftarce_bisect.sh does, is to copy half of the functions in full_file into the test_file and the other half into the non_test_file. This way, one can cat the test_file into the set_ftrace_filter functions and only test the functions that are in that file. If it works, then we run the process again after copying non_test_file to full_file and repeating the process. If the system crashed, then the bad function is in the test_file and after a reboot, the test_file becomes the new full_file in the next iteration. When we get down to a single function in the full_file, then ftrace_bisect.sh will report that as the bad function. Full documentation of how to use this simple script is within the script file itself. Link: http://lkml.kernel.org/r/20160920100716.131d3647@gandalf.local.home Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-09-20ubsan: allow to disable the null sanitizerChristian Borntraeger1-1/+4
Some architectures use a hardware defined structure at address zero. Checking for a null pointer will result in many ubsan reports. Allow users to disable the null sanitizer. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-09-20scripts/faddr2line: improve on base path filtering a bitLinus Torvalds1-1/+1
Due to our compiler include directives, the build pathnames for header files often end up being of the form "$srcdir/./include/linux/xyz.h", which ends up having that extra "." path component after the build base in it. Teach faddr2line to skip that too, to make code generated in inline functions in header files match the filename for the regular C files. Rabin Vincent pointed out that I can't make a stricter regexp match by using the " at " prefix for the pathname, because that ends up being locale-dependent. But this does require that the path match be preceded by a space, to make it a bit more strict (that matters mainly if we didn't find any base_dir at all, and we only end up with the "./" part of the match) Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Rabin Vincent <rabin@rab.in> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-09-19scripts: add script for translating stack dump function offsetsJosh Poimboeuf1-0/+177
addr2line doesn't work with KASLR addresses. Add a basic addr2line wrapper script which takes the 'func+offset/size' format as input. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-09-06docs: Special-case function-pointer parameters in kernel-docJonathan Corbet1-0/+2
Add yet another regex to kernel-doc to trap @param() references separately and not produce corrupt RST markup. Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-09-06docs: make kernel-doc handle varargs properlyJonathan Corbet1-1/+2
As far as I can tell, the handling of "..." arguments has never worked right, so any documentation provided was ignored in favor of "variable arguments." This makes kernel-doc handle "@...:" as documented. It does *not* fix spots in kerneldoc comments that don't follow that convention, but they are no more broken than before. Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-09-05Merge branch 'rc-fixes' of ↵Linus Torvalds1-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kbuild fix from Michal Marek: "Fix for 'make deb-pkg'. The bug got introduced in v4.8-rc1" * 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: builddeb: Skip gcc-plugins when not configured
2016-09-05Merge 4.8-rc5 into char-misc-nextGreg Kroah-Hartman3-11/+3
We want the fixes in here for merging and testing. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-02treewide: remove references to the now unnecessary DEFINE_PCI_DEVICE_TABLEJoe Perches2-10/+0
It's been eliminated from the sources, remove it from everywhere else. Link: http://lkml.kernel.org/r/076eff466fd7edb550c25c8b25d76924ca0eba62.1472660229.git.joe@perches.com Signed-off-by: Joe Perches <joe@perches.com> Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Andy Whitcroft <apw@canonical.com> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-09-01docs-rst: kernel-doc: fix typedef output in RST formatMauro Carvalho Chehab1-10/+24
When using a typedef function like this one: typedef bool v4l2_check_dv_timings_fnc (const struct v4l2_dv_timings * t, void * handle); The Sphinx C domain expects it to create a c:type: reference, as that's the way it creates the type references when parsing a c:function:: declaration. So, a declaration like: .. c:function:: bool v4l2_valid_dv_timings (const struct v4l2_dv_timings * t, const struct v4l2_dv_timings_cap * cap, v4l2_check_dv_timings_fnc fnc, void * fnc_handle) Will create a cross reference for :c:type:`v4l2_check_dv_timings_fnc`. So, when outputting such typedefs in RST format, we need to handle this special case, as otherwise it will produce those warnings: ./include/media/v4l2-dv-timings.h:43: WARNING: c:type reference target not found: v4l2_check_dv_timings_fnc ./include/media/v4l2-dv-timings.h:60: WARNING: c:type reference target not found: v4l2_check_dv_timings_fnc ./include/media/v4l2-dv-timings.h:81: WARNING: c:type reference target not found: v4l2_check_dv_timings_fnc So, change the kernel-doc script to produce a RST output for the above typedef as: .. c:type:: v4l2_check_dv_timings_fnc **Typedef**: timings check callback **Syntax** ``bool v4l2_check_dv_timings_fnc (const struct v4l2_dv_timings * t, void * handle);`` Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-09-01docs-rst: improve typedef parserMauro Carvalho Chehab1-1/+3
Improve the parser to handle typedefs like: typedef bool v4l2_check_dv_timings_fnc(const struct v4l2_dv_timings *t, void *handle); Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-08-31ver_linux: rename ver_linux.awk to ver_linuxAlexander Kapshuk1-0/+0
ver_linux.awk renamed to ver_linux. Signed-off-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31ver_linux: shell implementation removedAlexander Kapshuk1-193/+0
The shell implementation removed. To be replaced with an all-awk implementation via consecutive patch. Signed-off-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31ver_linux: complete awk implementationAlexander Kapshuk1-0/+89
The algorithm that extracts the version number of the utility being queried, and prints the name of the utility and its version number is currently implemented in awk. The code is used throughout the script, making its use repetative. The proposed implementation confines the algorithm in question to a function, which makes the script easier to read overall, as well as considerably reduces the number of lines of code. Every attempt has been made to retain the look and the format generated by the current implementation. Signed-off-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-28checkkconfigsymbols: use arglist instead of cmd stringValentin Rothberg1-11/+16
Splitting a command string could lead to unintended arguments. Use an argument list in the execute() function instead. Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-28checkkconfigsymblos: consistent symbol terminologyValentin Rothberg1-67/+67
'symbol' and 'feature' are used synonymously to refer to Kconfig symbols (configs, menus, etc.). Use the term 'symbol' to have a consistent terminology and to make the code more comprehensible. Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-28checkkconfigsymbols.py: fix pylint and pep8 warningsValentin Rothberg1-10/+8
Fix pylint and pep8 warnings to have a consistent syntax and style. Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-28checkkconfigsymbols: use ArgumentParserValentin Rothberg1-73/+69
Replace the deprecated OptionParser with ArgumentParser, as recommended by pylint. Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-28checkkconfigsymbols.py: port to Python 3Valentin Rothberg1-16/+17
Python 2 is slowly dying, so port the script to Python 3. Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-27checkkconfigsymbols.py: avoid shell injectionValentin Rothberg1-5/+7
Use subprocess and set shell to False to avoid potential shell injections. Reported-by: Bernd Dietzel <tcpip@t-online.de> Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-27get_maintainer: quiet noisy implicit -f vcs_file_exists checkingJoe Perches1-1/+3
Checking command line filenames that are outside the git tree can emit a noisy and confusing message. Quiet that message by redirecting stderr. Verify that the command was executed successfully. Fixes: 4cad35a7ca69 ("get_maintainer.pl: reduce need for command-line option -f") Link: http://lkml.kernel.org/r/1970a1d2fecb258e384e2e4fdaacdc9ccf3e30a4.1470955439.git.joe@perches.com Signed-off-by: Joe Perches <joe@perches.com> Reported-by: Wolfram Sang <wsa@the-dreams.de> Tested-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-25docs-rst: kernel-doc: better output struct membersMauro Carvalho Chehab1-1/+1
Right now, for a struct, kernel-doc produces the following output: .. c:type:: struct v4l2_prio_state stores the priority states **Definition** :: struct v4l2_prio_state { atomic_t prios[4]; }; **Members** ``atomic_t prios[4]`` array with elements to store the array priorities Putting a member name in verbatim and adding a continuation line causes the LaTeX output to generate something like: item[atomic_t prios\[4\]] array with elements to store the array priorities Everything inside "item" is non-breakable, with may produce lines bigger than the column width. Also, for function members, like: int (* rx_read) (struct v4l2_subdev *sd, u8 *buf, size_t count,ssize_t *num); It puts the name of the member at the end, like: int (*) (struct v4l2_subdev *sd, u8 *buf, size_t count,ssize_t *num) read With is very confusing. The best is to highlight what really matters: the member name. is a secondary information. So, change kernel-doc, for it to produce the output on a different way: **Members** ``prios[4]`` array with elements to store the array priorities Also, as the type is not part of LaTeX "item[]", LaTeX will split it into multiple lines, if needed. So, both LaTeX/PDF and HTML outputs will look good. It should be noticed, however, that the way Sphinx LaTeX output handles things like: Foo bar is different than the HTML output. On HTML, it will produce something like: **Foo** bar While, on LaTeX, it puts both foo and bar at the same line, like: **Foo** bar Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-08-23doc-rst: Revert "kernel-doc: fix handling of address_space tags"Markus Heiser1-3/+0
This reverts commit a88b1672d4ddf9895eb53e6980926d5e960dea8e. From the origin comit log:: The RST cpp:function handler is very pedantic: it doesn't allow any macros like __user on it Since the kernel-doc parser does NOT make use of the cpp:domain, there is no need to change the kernel-doc parser eleminating the address_space tags. Signed-off-by: Markus Heiser <markus.heiser@darmarIT.de> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-08-18checkkconfigsymbols.py: add --no-color option, don't print color to non-TTYAndrew Donnellan1-2/+10
Only print the ANSI colour escape codes if stdout is a TTY. Useful if redirecting output to a file or piping to another script. Also add a new option, --no-color, if the user wants to disable colour output for whatever reason. Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Acked-by: Valentin Rothberg <valentinrothberg@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-16builddeb: Skip gcc-plugins when not configuredKees Cook1-1/+3
When attempting to build a Debian kernel package, the "scripts/gcc-plugins" directory does not exist in the output tree unless CONFIG_GCC_PLUGINS=y. To avoid errors when not defined, this wraps the failing "find" in a config test. Reported-by: Frank Paulsen <frobnic+lkml@gmail.com> Tested-by: Christian Kujau <lists@nerdbynature.de> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Michal Marek <mmarek@suse.com>
2016-08-10get_maintainer: Don't check if STDIN exists in a VCS repositoryJoe Perches1-1/+1
If get_maintainer is not given any filename arguments on the command line, the standard input is read for a patch. But checking if a VCS has a file named &STDIN is not a good idea and fails. Verify the nominal input file is not &STDIN before checking the VCS. Fixes: 4cad35a7ca69 ("get_maintainer.pl: reduce need for command-line option -f") Reported-by: Christopher Covington <cov@codeaurora.org> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-09gcc-plugins: Add support for plugin subdirectoriesEmese Revfy2-4/+8
This adds support for building more complex gcc plugins that live in a subdirectory instead of just in a single source file. Reported-by: PaX Team <pageexec@freemail.hu> Signed-off-by: Emese Revfy <re.emese@gmail.com> [kees: clarified commit message] Signed-off-by: Kees Cook <keescook@chromium.org>
2016-08-09gcc-plugins: Automate make rule generationEmese Revfy1-2/+1
There's no reason to repeat the same names in the Makefile when the .so files have already been listed. The .o list can be generated from them. Reported-by: PaX Team <pageexec@freemail.hu> Signed-off-by: Emese Revfy <re.emese@gmail.com> [kees: clarified commit message] Signed-off-by: Kees Cook <keescook@chromium.org>
2016-08-09gcc-plugins: Add support for passing plugin argumentsEmese Revfy1-1/+1
The latent_entropy plugin needs to pass arguments, so this adds the support. Signed-off-by: Emese Revfy <re.emese@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2016-08-09gcc-plugins: abort builds cleanly when not supportedKees Cook2-9/+39
When the compiler doesn't support gcc plugins (either due to missing headers or too old a version), report the problem and abort the build instead of emitting a warning and letting the build founder with arcane compiler errors. Signed-off-by: Kees Cook <keescook@chromium.org>
2016-08-09kbuild: no gcc-plugins during cc-option testsEmese Revfy1-3/+7
The gcc-plugins arguments should not be included when performing cc-option tests. Steps to reproduce: 1) make mrproper 2) make defconfig 3) enable GCC_PLUGINS, GCC_PLUGIN_CYC_COMPLEXITY 4) enable FUNCTION_TRACER (it will select other options as well) 5) make && make modules Build errors: MODPOST 18 modules ERROR: "__fentry__" [net/netfilter/xt_nat.ko] undefined! ERROR: "__fentry__" [net/netfilter/xt_mark.ko] undefined! ERROR: "__fentry__" [net/netfilter/xt_addrtype.ko] undefined! ERROR: "__fentry__" [net/netfilter/xt_LOG.ko] undefined! ERROR: "__fentry__" [net/netfilter/nf_nat_sip.ko] undefined! ERROR: "__fentry__" [net/netfilter/nf_nat_irc.ko] undefined! ERROR: "__fentry__" [net/netfilter/nf_nat_ftp.ko] undefined! ERROR: "__fentry__" [net/netfilter/nf_nat.ko] undefined! Reported-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Emese Revfy <re.emese@gmail.com> [kees: renamed variable, clarified commit message] Signed-off-by: Kees Cook <keescook@chromium.org>
2016-08-03Merge tag 'trace-v4.8-1' of ↵Linus Torvalds1-1/+8
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: "A few updates and fixes: - move the suppressing of the __builtin_return_address >0 warning to the tracing directory only. - metag recordmcount fix for newer glibc's - two tracing histogram fixes that were reported by KASAN" * tag 'trace-v4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Fix use-after-free in hist_register_trigger() tracing: Fix use-after-free in hist_unreg_all/hist_enable_unreg_all Makefile: Mute warning for __builtin_return_address(>0) for tracing only ftrace/recordmcount: Work around for addition of metag magic but not relocations
2016-08-03Merge branch 'akpm' (patches from Andrew)Linus Torvalds3-10/+41
Merge yet more updates from Andrew Morton: - the rest of ocfs2 - various hotfixes, mainly MM - quite a bit of misc stuff - drivers, fork, exec, signals, etc. - printk updates - firmware - checkpatch - nilfs2 - more kexec stuff than usual - rapidio updates - w1 things * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (111 commits) ipc: delete "nr_ipc_ns" kcov: allow more fine-grained coverage instrumentation init/Kconfig: add clarification for out-of-tree modules config: add android config fragments init/Kconfig: ban CONFIG_LOCALVERSION_AUTO with allmodconfig relay: add global mode support for buffer-only channels init: allow blacklisting of module_init functions w1:omap_hdq: fix regression w1: add helper macro module_w1_family w1: remove need for ida and use PLATFORM_DEVID_AUTO rapidio/switches: add driver for IDT gen3 switches powerpc/fsl_rio: apply changes for RIO spec rev 3 rapidio: modify for rev.3 specification changes rapidio: change inbound window size type to u64 rapidio/idt_gen2: fix locking warning rapidio: fix error handling in mbox request/release functions rapidio/tsi721_dma: advance queue processing from transfer submit call rapidio/tsi721: add messaging mbox selector parameter rapidio/tsi721: add PCIe MRRS override parameter rapidio/tsi721_dma: add channel mask and queue size parameters ...
2016-08-03kcov: allow more fine-grained coverage instrumentationVegard Nossum1-1/+1
For more targeted fuzzing, it's better to disable kernel-wide instrumentation and instead enable it on a per-subsystem basis. This follows the pattern of UBSAN and allows you to compile in the kcov driver without instrumenting the whole kernel. To instrument a part of the kernel, you can use either # for a single file in the current directory KCOV_INSTRUMENT_filename.o := y or # for all the files in the current directory (excluding subdirectories) KCOV_INSTRUMENT := y or # (same as above) ccflags-y += $(CFLAGS_KCOV) or # for all the files in the current directory (including subdirectories) subdir-ccflags-y += $(CFLAGS_KCOV) Link: http://lkml.kernel.org/r/1464008380-11405-1-git-send-email-vegard.nossum@oracle.com Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-03checkpatch: if no filenames then read stdinAllen Hubbe1-2/+2
If no filenames are given, then read the patch from stdin. Link: http://lkml.kernel.org/r/a8784f291ccb5067361992bf5d41ff6cfb0ce5cb.1469830917.git.allenbh@gmail.com Signed-off-by: Allen Hubbe <allenbh@gmail.com> Acked-by: Joe Perches <joe@perches.com> Cc: Andy Whitcroft <apw@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-03checkpatch: check signoff when reading stdinAllen Hubbe1-1/+3
Signoff was not checked if the filename is '-', indicating reading the patch from stdin. Commands such as the below would not warn about a missing signoff, because the patch filename is '-'. This change allows checkpatch to warn about a missing signoff, even if the input filename is '-', but only if the patch has a commit message. git show --pretty=email | scripts/checkpatch.pl - A more common use of checkpatch with stdin is for piping git diff through checkpatch. The diff output would not contain a commit message, and therefore it would not contain a signoff line. For this common use case, a warning should not be printed about the missing signoff. With this change we will only warn about a missing signoff if the input contains a commit message. git diff | scripts/checkpatch.pl - Before this patch, a workaround for the first command was to refer to stdin by a name other than '-'. The workaround is not an elegant solution, because elsewhere checkpatch uses the fact that filename equals '-', such as in setting '$vname' to 'Your patch' for stdin. The command below would report "/dev/stdin has style problems" instead of "Your patch has style problems." git show --pretty=email | scripts/checkpatch.pl /dev/stdin Link: http://lkml.kernel.org/r/48be31e414bddc65bccfa6b1322359be9ba032eb.1469670589.git.allenbh@gmail.com Signed-off-by: Allen Hubbe <allenbh@gmail.com> Acked-by: Joe Perches <joe@perches.com> Cc: Andy Whitcroft <apw@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-03checkpatch: improve 'bare use of' signed/unsigned types warningJoe Perches1-1/+1
Fix false positive warning of identifiers ending in signed with an = assignment of WARNING: Prefer 'signed int' to bare use of 'signed'. Link: http://lkml.kernel.org/r/6a0e24c3e9102337528ecfcbbe91a0eb5b4820ed.1469529497.git.joe@perches.com Signed-off-by: Joe Perches <joe@perches.com> Reported-by: Alan Douglas <alanjhd@gmail.com> Acked-by: Andy Whitcroft <apw@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-03checkpatch: don't complain about BIT macro in uapiTomas Winkler1-2/+3
BIT macro cannot be exported to UAPI, don't complain about it. Link: http://lkml.kernel.org/r/1468707033-16173-1-git-send-email-tomas.winkler@intel.com Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Acked-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-03checkpatch: yet another commit id improvementJoe Perches1-2/+2
Using \b isn't good enough to isolate what appears to be a commit id in a commit message. Make sure there is a space or a quote like character after a continuous run of hexadecimal characters that could be a commit id. Link: http://lkml.kernel.org/r/fdd22b47463a21c21132edbb8aa35e372950a1e6.1468869915.git.joe@perches.com Signed-off-by: Joe Perches <joe@perches.com> Cc: "Zhuo, Qiuxu" <qiuxu.zhuo@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-03checkpatch: allow c99 style // commentsJoe Perches1-0/+6
Sanitise the lines that contain c99 comments so that the error doesn't get emitted. Link: http://lkml.kernel.org/r/d4d22c34ad7bcc1bceb52f0742f76b7a6d585235.1468368420.git.joe@perches.com Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-03checkpatch: skip long lines that use an EFI_GUID macroJoe Perches1-0/+4
These are also possible single line uses that exceed the generic maximum line length (typically 80 columns) Link: http://lkml.kernel.org/r/32a6a85fbd6161f1bb55ce176a464e44591afc5b.1468368420.git.joe@perches.com Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-03get_maintainer.pl: reduce need for command-line option -fJoe Perches1-1/+19
If a vcs is used, look to see if the vcs tracks the file specified and so the -f option becomes optional. Link: http://lkml.kernel.org/r/7c86a8df0d48770c45778a43b6b3e4627b2a90ee.1469746395.git.joe@perches.com Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02Merge branch 'misc' of ↵Linus Torvalds8-20/+162
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull misc kbuild updates from Michal Marek: - coccicheck script improvements by Luis Rodriguez and Deepa Dinamani - new coccinelle patches by Yann Droneaud and Vaishali Thakkar - debian packaging fixes by Wilfried Klaebe, Henning Schild and Marcin Mielniczuk * 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: Fix the Debian packaging script on systems with no codename builddeb: fix file permissions before packaging scripts/coccinelle: require coccinelle >= 1.0.4 on device_node_continue.cocci coccicheck: refer to Documentation/coccinelle.txt and wiki coccicheck: add support for requring a coccinelle version scripts: add Linux .cocciconfig for coccinelle coccicheck: replace --very-quiet with --quiet when debugging coccicheck: add support for DEBUG_FILE coccicheck: enable parmap support coccicheck: make SPFLAGS more useful coccicheck: move spatch binary check up builddeb: really include objtool binary in headers package coccinelle: catch krealloc() on devm_*() allocated memory coccinelle: recognize more devm_* memory allocation functions coccinelle: also catch kzfree() issues coccicheck: Allow for overriding spatch flags Coccinelle: noderef: Add new rules and correct the old rule
2016-08-02Merge branch 'kbuild' of ↵Linus Torvalds20-11/+2051
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kbuild updates from Michal Marek: - GCC plugin support by Emese Revfy from grsecurity, with a fixup from Kees Cook. The plugins are meant to be used for static analysis of the kernel code. Two plugins are provided already. - reduction of the gcc commandline by Arnd Bergmann. - IS_ENABLED / IS_REACHABLE macro enhancements by Masahiro Yamada - bin2c fix by Michael Tautschnig - setlocalversion fix by Wolfram Sang * 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: gcc-plugins: disable under COMPILE_TEST kbuild: Abort build on bad stack protector flag scripts: Fix size mismatch of kexec_purgatory_size kbuild: make samples depend on headers_install Kbuild: don't add obj tree in additional includes Kbuild: arch: look for generated headers in obtree Kbuild: always prefix objtree in LINUXINCLUDE Kbuild: avoid duplicate include path Kbuild: don't add ../../ to include path vmlinux.lds.h: replace config_enabled() with IS_ENABLED() kconfig.h: allow to use IS_{ENABLE,REACHABLE} in macro expansion kconfig.h: use already defined macros for IS_REACHABLE() define export.h: use __is_defined() to check if __KSYM_* is defined kconfig.h: use __is_defined() to check if MODULE is defined kbuild: setlocalversion: print error to STDERR Add sancov plugin Add Cyclomatic complexity GCC plugin GCC plugin infrastructure Shared library support
2016-08-02ftrace/recordmcount: Work around for addition of metag magic but not relocationsLaura Abbott1-1/+8
glibc recently did a sync up (94e73c95d9b5 "elf.h: Sync with the gabi webpage") that added a #define for EM_METAG but did not add relocations This triggers build errors: scripts/recordmcount.c: In function 'do_file': scripts/recordmcount.c:466:28: error: 'R_METAG_ADDR32' undeclared (first use in this function) case EM_METAG: reltype = R_METAG_ADDR32; ^~~~~~~~~~~~~~ scripts/recordmcount.c:466:28: note: each undeclared identifier is reported only once for each function it appears in scripts/recordmcount.c:468:20: error: 'R_METAG_NONE' undeclared (first use in this function) rel_type_nop = R_METAG_NONE; ^~~~~~~~~~~~ Work around this change with some more #ifdefery for the relocations. Fedora Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1354034 Link: http://lkml.kernel.org/r/1468005530-14757-1-git-send-email-labbott@redhat.com Cc: stable@vger.kernel.org # v3.9+ Cc: James Hogan <james.hogan@imgtec.com> Fixes: 00512bdd4573 ("metag: ftrace support") Reported-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>