summaryrefslogtreecommitdiff
path: root/scripts
AgeCommit message (Collapse)AuthorFilesLines
2022-12-16Merge tag 'char-misc-6.2-rc1' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the large set of char/misc and other driver subsystem changes for 6.2-rc1. Nothing earth-shattering in here at all, just a lot of new driver development and minor fixes. Highlights include: - fastrpc driver updates - iio new drivers and updates - habanalabs driver updates for new hardware and features - slimbus driver updates - speakup module parameters added to aid in boot time configuration - i2c probe_new conversions for lots of different drivers - other small driver fixes and additions One semi-interesting change in here is the increase of the number of misc dynamic minors available to 1048448 to handle new huge-cpu systems. All of these have been in linux-next for a while with no reported problems" * tag 'char-misc-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (521 commits) extcon: usbc-tusb320: Convert to i2c's .probe_new() extcon: rt8973: Convert to i2c's .probe_new() extcon: fsa9480: Convert to i2c's .probe_new() extcon: max77843: Replace irqchip mask_invert with unmask_base chardev: fix error handling in cdev_device_add() mcb: mcb-parse: fix error handing in chameleon_parse_gdd() drivers: mcb: fix resource leak in mcb_probe() coresight: etm4x: fix repeated words in comments coresight: cti: Fix null pointer error on CTI init before ETM coresight: trbe: remove cpuhp instance node before remove cpuhp state counter: stm32-lptimer-cnt: fix the check on arr and cmp registers update misc: fastrpc: Add dma_mask to fastrpc_channel_ctx misc: fastrpc: Add mmap request assigning for static PD pool misc: fastrpc: Safekeep mmaps on interrupted invoke misc: fastrpc: Add support for audiopd misc: fastrpc: Rework fastrpc_req_munmap misc: fastrpc: Use fastrpc_map_put in fastrpc_map_create on fail misc: fastrpc: Add fastrpc_remote_heap_alloc misc: fastrpc: Add reserved mem support misc: fastrpc: Rename audio protection domain to root ...
2022-12-15Merge tag 'riscv-for-linus-6.2-mw1' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V updates from Palmer Dabbelt: - Support for the T-Head PMU via the perf subsystem - ftrace support for rv32 - Support for non-volatile memory devices - Various fixes and cleanups * tag 'riscv-for-linus-6.2-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (52 commits) Documentation: RISC-V: patch-acceptance: s/implementor/implementer Documentation: RISC-V: Mention the UEFI Standards Documentation: RISC-V: Allow patches for non-standard behavior Documentation: RISC-V: Fix a typo in patch-acceptance riscv: Fixup compile error with !MMU riscv: Fix P4D_SHIFT definition for 3-level page table mode riscv: Apply a static assert to riscv_isa_ext_id RISC-V: Add some comments about the shadow and overflow stacks RISC-V: Align the shadow stack RISC-V: Ensure Zicbom has a valid block size RISC-V: Introduce riscv_isa_extension_check RISC-V: Improve use of isa2hwcap[] riscv: Don't duplicate _ALTERNATIVE_CFG* macros riscv: alternatives: Drop the underscores from the assembly macro names riscv: alternatives: Don't name unused macro parameters riscv: Don't duplicate __ALTERNATIVE_CFG in __ALTERNATIVE_CFG_2 riscv: mm: call best_map_size many times during linear-mapping riscv: Move cast inside kernel_mapping_[pv]a_to_[vp]a riscv: Fix crash during early errata patching riscv: boot: add zstd support ...
2022-12-15Merge tag 'x86_core_for_v6.2' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 core updates from Borislav Petkov: - Add the call depth tracking mitigation for Retbleed which has been long in the making. It is a lighterweight software-only fix for Skylake-based cores where enabling IBRS is a big hammer and causes a significant performance impact. What it basically does is, it aligns all kernel functions to 16 bytes boundary and adds a 16-byte padding before the function, objtool collects all functions' locations and when the mitigation gets applied, it patches a call accounting thunk which is used to track the call depth of the stack at any time. When that call depth reaches a magical, microarchitecture-specific value for the Return Stack Buffer, the code stuffs that RSB and avoids its underflow which could otherwise lead to the Intel variant of Retbleed. This software-only solution brings a lot of the lost performance back, as benchmarks suggest: https://lore.kernel.org/all/20220915111039.092790446@infradead.org/ That page above also contains a lot more detailed explanation of the whole mechanism - Implement a new control flow integrity scheme called FineIBT which is based on the software kCFI implementation and uses hardware IBT support where present to annotate and track indirect branches using a hash to validate them - Other misc fixes and cleanups * tag 'x86_core_for_v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (80 commits) x86/paravirt: Use common macro for creating simple asm paravirt functions x86/paravirt: Remove clobber bitmask from .parainstructions x86/debug: Include percpu.h in debugreg.h to get DECLARE_PER_CPU() et al x86/cpufeatures: Move X86_FEATURE_CALL_DEPTH from bit 18 to bit 19 of word 11, to leave space for WIP X86_FEATURE_SGX_EDECCSSA bit x86/Kconfig: Enable kernel IBT by default x86,pm: Force out-of-line memcpy() objtool: Fix weak hole vs prefix symbol objtool: Optimize elf_dirty_reloc_sym() x86/cfi: Add boot time hash randomization x86/cfi: Boot time selection of CFI scheme x86/ibt: Implement FineIBT objtool: Add --cfi to generate the .cfi_sites section x86: Add prefix symbols for function padding objtool: Add option to generate prefix symbols objtool: Avoid O(bloody terrible) behaviour -- an ode to libelf objtool: Slice up elf_create_section_symbol() kallsyms: Revert "Take callthunks into account" x86: Unconfuse CONFIG_ and X86_FEATURE_ namespaces x86/retpoline: Fix crash printing warning x86/paravirt: Fix a !PARAVIRT build warning ...
2022-12-14Merge tag 'hardening-v6.2-rc1' of ↵Linus Torvalds1-1/+5
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull kernel hardening updates from Kees Cook: - Convert flexible array members, fix -Wstringop-overflow warnings, and fix KCFI function type mismatches that went ignored by maintainers (Gustavo A. R. Silva, Nathan Chancellor, Kees Cook) - Remove the remaining side-effect users of ksize() by converting dma-buf, btrfs, and coredump to using kmalloc_size_roundup(), add more __alloc_size attributes, and introduce full testing of all allocator functions. Finally remove the ksize() side-effect so that each allocation-aware checker can finally behave without exceptions - Introduce oops_limit (default 10,000) and warn_limit (default off) to provide greater granularity of control for panic_on_oops and panic_on_warn (Jann Horn, Kees Cook) - Introduce overflows_type() and castable_to_type() helpers for cleaner overflow checking - Improve code generation for strscpy() and update str*() kern-doc - Convert strscpy and sigphash tests to KUnit, and expand memcpy tests - Always use a non-NULL argument for prepare_kernel_cred() - Disable structleak plugin in FORTIFY KUnit test (Anders Roxell) - Adjust orphan linker section checking to respect CONFIG_WERROR (Xin Li) - Make sure siginfo is cleared for forced SIGKILL (haifeng.xu) - Fix um vs FORTIFY warnings for always-NULL arguments * tag 'hardening-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (31 commits) ksmbd: replace one-element arrays with flexible-array members hpet: Replace one-element array with flexible-array member um: virt-pci: Avoid GCC non-NULL warning signal: Initialize the info in ksignal lib: fortify_kunit: build without structleak plugin panic: Expose "warn_count" to sysfs panic: Introduce warn_limit panic: Consolidate open-coded panic_on_warn checks exit: Allow oops_limit to be disabled exit: Expose "oops_count" to sysfs exit: Put an upper limit on how often we can oops panic: Separate sysctl logic from CONFIG_SMP mm/pgtable: Fix multiple -Wstringop-overflow warnings mm: Make ksize() a reporting-only function kunit/fortify: Validate __alloc_size attribute results drm/sti: Fix return type of sti_{dvo,hda,hdmi}_connector_mode_valid() drm/fsl-dcu: Fix return type of fsl_dcu_drm_connector_mode_valid() driver core: Add __alloc_size hint to devm allocators overflow: Introduce overflows_type() and castable_to_type() coredump: Proactively round up to kmalloc bucket size ...
2022-12-14Merge tag 'for-linus-iommufd' of ↵Linus Torvalds1-4/+8
git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd Pull iommufd implementation from Jason Gunthorpe: "iommufd is the user API to control the IOMMU subsystem as it relates to managing IO page tables that point at user space memory. It takes over from drivers/vfio/vfio_iommu_type1.c (aka the VFIO container) which is the VFIO specific interface for a similar idea. We see a broad need for extended features, some being highly IOMMU device specific: - Binding iommu_domain's to PASID/SSID - Userspace IO page tables, for ARM, x86 and S390 - Kernel bypassed invalidation of user page tables - Re-use of the KVM page table in the IOMMU - Dirty page tracking in the IOMMU - Runtime Increase/Decrease of IOPTE size - PRI support with faults resolved in userspace Many of these HW features exist to support VM use cases - for instance the combination of PASID, PRI and Userspace IO Page Tables allows an implementation of DMA Shared Virtual Addressing (vSVA) within a guest. Dirty tracking enables VM live migration with SRIOV devices and PASID support allow creating "scalable IOV" devices, among other things. As these features are fundamental to a VM platform they need to be uniformly exposed to all the driver families that do DMA into VMs, which is currently VFIO and VDPA" For more background, see the extended explanations in Jason's pull request: https://lore.kernel.org/lkml/Y5dzTU8dlmXTbzoJ@nvidia.com/ * tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd: (62 commits) iommufd: Change the order of MSI setup iommufd: Improve a few unclear bits of code iommufd: Fix comment typos vfio: Move vfio group specific code into group.c vfio: Refactor dma APIs for emulated devices vfio: Wrap vfio group module init/clean code into helpers vfio: Refactor vfio_device open and close vfio: Make vfio_device_open() truly device specific vfio: Swap order of vfio_device_container_register() and open_device() vfio: Set device->group in helper function vfio: Create wrappers for group register/unregister vfio: Move the sanity check of the group to vfio_create_group() vfio: Simplify vfio_create_group() iommufd: Allow iommufd to supply /dev/vfio/vfio vfio: Make vfio_container optionally compiled vfio: Move container related MODULE_ALIAS statements into container.c vfio-iommufd: Support iommufd for emulated VFIO devices vfio-iommufd: Support iommufd for physical VFIO devices vfio-iommufd: Allow iommufd to be used in place of a container fd vfio: Use IOMMU_CAP_ENFORCE_CACHE_COHERENCY for vfio_file_enforced_coherent() ...
2022-12-14Merge tag 'net-next-6.2' of ↵Linus Torvalds1-14/+35
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Paolo Abeni: "Core: - Allow live renaming when an interface is up - Add retpoline wrappers for tc, improving considerably the performances of complex queue discipline configurations - Add inet drop monitor support - A few GRO performance improvements - Add infrastructure for atomic dev stats, addressing long standing data races - De-duplicate common code between OVS and conntrack offloading infrastructure - A bunch of UBSAN_BOUNDS/FORTIFY_SOURCE improvements - Netfilter: introduce packet parser for tunneled packets - Replace IPVS timer-based estimators with kthreads to scale up the workload with the number of available CPUs - Add the helper support for connection-tracking OVS offload BPF: - Support for user defined BPF objects: the use case is to allocate own objects, build own object hierarchies and use the building blocks to build own data structures flexibly, for example, linked lists in BPF - Make cgroup local storage available to non-cgroup attached BPF programs - Avoid unnecessary deadlock detection and failures wrt BPF task storage helpers - A relevant bunch of BPF verifier fixes and improvements - Veristat tool improvements to support custom filtering, sorting, and replay of results - Add LLVM disassembler as default library for dumping JITed code - Lots of new BPF documentation for various BPF maps - Add bpf_rcu_read_{,un}lock() support for sleepable programs - Add RCU grace period chaining to BPF to wait for the completion of access from both sleepable and non-sleepable BPF programs - Add support storing struct task_struct objects as kptrs in maps - Improve helper UAPI by explicitly defining BPF_FUNC_xxx integer values - Add libbpf *_opts API-variants for bpf_*_get_fd_by_id() functions Protocols: - TCP: implement Protective Load Balancing across switch links - TCP: allow dynamically disabling TCP-MD5 static key, reverting back to fast[er]-path - UDP: Introduce optional per-netns hash lookup table - IPv6: simplify and cleanup sockets disposal - Netlink: support different type policies for each generic netlink operation - MPTCP: add MSG_FASTOPEN and FastOpen listener side support - MPTCP: add netlink notification support for listener sockets events - SCTP: add VRF support, allowing sctp sockets binding to VRF devices - Add bridging MAC Authentication Bypass (MAB) support - Extensions for Ethernet VPN bridging implementation to better support multicast scenarios - More work for Wi-Fi 7 support, comprising conversion of all the existing drivers to internal TX queue usage - IPSec: introduce a new offload type (packet offload) allowing complete header processing and crypto offloading - IPSec: extended ack support for more descriptive XFRM error reporting - RXRPC: increase SACK table size and move processing into a per-local endpoint kernel thread, reducing considerably the required locking - IEEE 802154: synchronous send frame and extended filtering support, initial support for scanning available 15.4 networks - Tun: bump the link speed from 10Mbps to 10Gbps - Tun/VirtioNet: implement UDP segmentation offload support Driver API: - PHY/SFP: improve power level switching between standard level 1 and the higher power levels - New API for netdev <-> devlink_port linkage - PTP: convert existing drivers to new frequency adjustment implementation - DSA: add support for rx offloading - Autoload DSA tagging driver when dynamically changing protocol - Add new PCP and APPTRUST attributes to Data Center Bridging - Add configuration support for 800Gbps link speed - Add devlink port function attribute to enable/disable RoCE and migratable - Extend devlink-rate to support strict prioriry and weighted fair queuing - Add devlink support to directly reading from region memory - New device tree helper to fetch MAC address from nvmem - New big TCP helper to simplify temporary header stripping New hardware / drivers: - Ethernet: - Marvel Octeon CNF95N and CN10KB Ethernet Switches - Marvel Prestera AC5X Ethernet Switch - WangXun 10 Gigabit NIC - Motorcomm yt8521 Gigabit Ethernet - Microchip ksz9563 Gigabit Ethernet Switch - Microsoft Azure Network Adapter - Linux Automation 10Base-T1L adapter - PHY: - Aquantia AQR112 and AQR412 - Motorcomm YT8531S - PTP: - Orolia ART-CARD - WiFi: - MediaTek Wi-Fi 7 (802.11be) devices - RealTek rtw8821cu, rtw8822bu, rtw8822cu and rtw8723du USB devices - Bluetooth: - Broadcom BCM4377/4378/4387 Bluetooth chipsets - Realtek RTL8852BE and RTL8723DS - Cypress.CYW4373A0 WiFi + Bluetooth combo device Drivers: - CAN: - gs_usb: bus error reporting support - kvaser_usb: listen only and bus error reporting support - Ethernet NICs: - Intel (100G): - extend action skbedit to RX queue mapping - implement devlink-rate support - support direct read from memory - nVidia/Mellanox (mlx5): - SW steering improvements, increasing rules update rate - Support for enhanced events compression - extend H/W offload packet manipulation capabilities - implement IPSec packet offload mode - nVidia/Mellanox (mlx4): - better big TCP support - Netronome Ethernet NICs (nfp): - IPsec offload support - add support for multicast filter - Broadcom: - RSS and PTP support improvements - AMD/SolarFlare: - netlink extened ack improvements - add basic flower matches to offload, and related stats - Virtual NICs: - ibmvnic: introduce affinity hint support - small / embedded: - FreeScale fec: add initial XDP support - Marvel mv643xx_eth: support MII/GMII/RGMII modes for Kirkwood - TI am65-cpsw: add suspend/resume support - Mediatek MT7986: add RX wireless wthernet dispatch support - Realtek 8169: enable GRO software interrupt coalescing per default - Ethernet high-speed switches: - Microchip (sparx5): - add support for Sparx5 TC/flower H/W offload via VCAP - Mellanox mlxsw: - add 802.1X and MAC Authentication Bypass offload support - add ip6gre support - Embedded Ethernet switches: - Mediatek (mtk_eth_soc): - improve PCS implementation, add DSA untag support - enable flow offload support - Renesas: - add rswitch R-Car Gen4 gPTP support - Microchip (lan966x): - add full XDP support - add TC H/W offload via VCAP - enable PTP on bridge interfaces - Microchip (ksz8): - add MTU support for KSZ8 series - Qualcomm 802.11ax WiFi (ath11k): - support configuring channel dwell time during scan - MediaTek WiFi (mt76): - enable Wireless Ethernet Dispatch (WED) offload support - add ack signal support - enable coredump support - remain_on_channel support - Intel WiFi (iwlwifi): - enable Wi-Fi 7 Extremely High Throughput (EHT) PHY capabilities - 320 MHz channels support - RealTek WiFi (rtw89): - new dynamic header firmware format support - wake-over-WLAN support" * tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2002 commits) ipvs: fix type warning in do_div() on 32 bit net: lan966x: Remove a useless test in lan966x_ptp_add_trap() net: ipa: add IPA v4.7 support dt-bindings: net: qcom,ipa: Add SM6350 compatible bnxt: Use generic HBH removal helper in tx path IPv6/GRO: generic helper to remove temporary HBH/jumbo header in driver selftests: forwarding: Add bridge MDB test selftests: forwarding: Rename bridge_mdb test bridge: mcast: Support replacement of MDB port group entries bridge: mcast: Allow user space to specify MDB entry routing protocol bridge: mcast: Allow user space to add (*, G) with a source list and filter mode bridge: mcast: Add support for (*, G) with a source list and filter mode bridge: mcast: Avoid arming group timer when (S, G) corresponds to a source bridge: mcast: Add a flag for user installed source entries bridge: mcast: Expose __br_multicast_del_group_src() bridge: mcast: Expose br_multicast_new_group_src() bridge: mcast: Add a centralized error path bridge: mcast: Place netlink policy before validation functions bridge: mcast: Split (*, G) and (S, G) addition into different functions bridge: mcast: Do not derive entry type from its filter mode ...
2022-12-14Merge tag 'modules-6.2-rc1' of ↵Linus Torvalds2-3/+79
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux Pull modules updates from Luis Chamberlain: "Tux gets for xmas an improvement to the average lookup performance of kallsyms_lookup_name() by 715x thanks to the work by Zhen Lei, which upgraded our old implementation from being O(n) to O(log(n)), while also retaining the old implementation support on /proc/kallsyms. The only penalty was increasing the memory footprint by 3 * kallsyms_num_syms. Folks who want to improve this further now also have a dedicated selftest facility through KALLSYMS_SELFTEST. Stephen Boyd added zstd in-kernel decompression support, but the only users of this would be folks using the load-pin LSM because otherwise we do module decompression in userspace. The only other thing with mentioning is a minor boot time optimization by Rasmus Villemoes which deferes param_sysfs_init() to late init. The rest is cleanups and minor fixes" * tag 'modules-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: livepatch: Call klp_match_callback() in klp_find_callback() to avoid code duplication module/decompress: Support zstd in-kernel decompression kallsyms: Remove unneeded semicolon kallsyms: Add self-test facility livepatch: Use kallsyms_on_each_match_symbol() to improve performance kallsyms: Add helper kallsyms_on_each_match_symbol() kallsyms: Reduce the memory occupied by kallsyms_seqs_of_names[] kallsyms: Correctly sequence symbols when CONFIG_LTO_CLANG=y kallsyms: Improve the performance of kallsyms_lookup_name() scripts/kallsyms: rename build_initial_tok_table() module: Fix NULL vs IS_ERR checking for module_get_next_page kernel/params.c: defer most of param_sysfs_init() to late_initcall time module: Remove unused macros module_addr_min/max module: remove redundant module_sysfs_initialized variable
2022-12-14Merge tag 'devicetree-for-6.2' of ↵Linus Torvalds14-52/+132
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: "DT Bindings: - Various LED binding conversions and clean-ups. Convert the ir-spi-led, pwm-ir-tx, and gpio-ir-tx LED bindings to schemas. Consistently reference LED common.yaml or multi-led schemas and disallow undefined properties. - Convert IDT 89HPESx, pwm-clock, st,stmipid02, Xilinx PCIe hosts, and fsl,imx-fb bindings to schema - Add ata-generic, Broadcom u-boot environment, and dynamic MTD sub-partitions bindings. - Make all SPI based displays reference spi-peripheral-props.yaml - Fix some schema property regex's which should be fixed strings or were missing start/end anchors - Remove 'status' in examples, again... DT Core: - Fix a possible NULL dereference in overlay functions - Fix kexec reading 32-bit "linux,initrd-{start,end}" values (which never worked) - Add of_address_count() helper to count number of 'reg' entries - Support .dtso extension for DT overlay source files. Rename staging and unittest overlay files. - Update dtc to upstream v1.6.1-63-g55778a03df61" * tag 'devicetree-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (42 commits) dt-bindings: leds: Add missing references to common LED schema dt-bindings: leds: intel,lgm: Add missing 'led-gpios' property of: overlay: fix null pointer dereferencing in find_dup_cset_node_entry() and find_dup_cset_prop() dt-bindings: lcdif: Fix constraints for imx8mp media: dt-bindings: atmel,isc: Drop unneeded unevaluatedProperties dt-bindings: Drop Jee Heng Sia dt-bindings: thermal: cooling-devices: Add missing cache related properties dt-bindings: leds: irled: ir-spi-led: convert to DT schema dt-bindings: leds: irled: pwm-ir-tx: convert to DT schema dt-bindings: leds: irled: gpio-ir-tx: convert to DT schema dt-bindings: leds: mt6360: rework to match multi-led dt-bindings: leds: lp55xx: rework to match multi-led dt-bindings: leds: lp55xx: switch to preferred 'gpios' suffix dt-bindings: leds: lp55xx: allow label dt-bindings: leds: use unevaluatedProperties for common.yaml dt-bindings: thermal: tsens: Add SM6115 compatible of/kexec: Fix reading 32-bit "linux,initrd-{start,end}" values dt-bindings: display: Convert fsl,imx-fb.txt to dt-schema dt-bindings: Add missing start and/or end of line regex anchors dt-bindings: qcom,pdc: Add missing compatibles ...
2022-12-13Merge tag 'mm-nonmm-stable-2022-12-12' of ↵Linus Torvalds2-2/+51
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: - A ptrace API cleanup series from Sergey Shtylyov - Fixes and cleanups for kexec from ye xingchen - nilfs2 updates from Ryusuke Konishi - squashfs feature work from Xiaoming Ni: permit configuration of the filesystem's compression concurrency from the mount command line - A series from Akinobu Mita which addresses bound checking errors when writing to debugfs files - A series from Yang Yingliang to address rapidio memory leaks - A series from Zheng Yejian to address possible overflow errors in encode_comp_t() - And a whole shower of singleton patches all over the place * tag 'mm-nonmm-stable-2022-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (79 commits) ipc: fix memory leak in init_mqueue_fs() hfsplus: fix bug causing custom uid and gid being unable to be assigned with mount rapidio: devices: fix missing put_device in mport_cdev_open kcov: fix spelling typos in comments hfs: Fix OOB Write in hfs_asc2mac hfs: fix OOB Read in __hfs_brec_find relay: fix type mismatch when allocating memory in relay_create_buf() ocfs2: always read both high and low parts of dinode link count io-mapping: move some code within the include guarded section kernel: kcsan: kcsan_test: build without structleak plugin mailmap: update email for Iskren Chernev eventfd: change int to __u64 in eventfd_signal() ifndef CONFIG_EVENTFD rapidio: fix possible UAF when kfifo_alloc() fails relay: use strscpy() is more robust and safer cpumask: limit visibility of FORCE_NR_CPUS acct: fix potential integer overflow in encode_comp_t() acct: fix accuracy loss for input value of encode_comp_t() linux/init.h: include <linux/build_bug.h> and <linux/stringify.h> rapidio: rio: fix possible name leak in rio_register_mport() rapidio: fix possible name leaks when rio_add_device() fails ...
2022-12-13Merge tag 'docs-6.2' of git://git.lwn.net/linuxLinus Torvalds2-29/+33
Pull documentation updates from Jonathan Corbet: "This was a not-too-busy cycle for documentation; highlights include: - The beginnings of a set of translations into Spanish, headed up by Carlos Bilbao - More Chinese translations - A change to the Sphinx "alabaster" theme by default for HTML generation. Unlike the previous default (Read the Docs), alabaster is shipped with Sphinx by default, reducing the number of other dependencies that need to be installed. It also (IMO) produces a cleaner and more readable result. - The ability to render the documentation into the texinfo format (something Sphinx could always do, we just never wired it up until now) Plus the usual collection of typo fixes, build-warning fixes, and minor updates" * tag 'docs-6.2' of git://git.lwn.net/linux: (67 commits) Documentation/features: Use loongarch instead of loong Documentation/features-refresh.sh: Only sed the beginning "arch" of ARCH_DIR docs/zh_CN: Fix '.. only::' directive's expression docs/sp_SP: Add memory-barriers.txt Spanish translation docs/zh_CN/LoongArch: Update links of LoongArch ISA Vol1 and ELF psABI docs/LoongArch: Update links of LoongArch ISA Vol1 and ELF psABI Documentation/features: Update feature lists for 6.1 Documentation: Fixed a typo in bootconfig.rst docs/sp_SP: Add process coding-style translation docs/sp_SP: Add kernel-docs.rst Spanish translation docs: Create translations/sp_SP/process/, move submitting-patches.rst docs: Add book to process/kernel-docs.rst docs: Retire old resources from kernel-docs.rst docs: Update maintainer of kernel-docs.rst Documentation: riscv: Document the sv57 VM layout Documentation: USB: correct possessive "its" usage math64: fix kernel-doc return value warnings math64: add kernel-doc for DIV64_U64_ROUND_UP math64: favor kernel-doc from header files doc: add texinfodocs and infodocs targets ...
2022-12-13Merge tag 'rust-6.2' of https://github.com/Rust-for-Linux/linuxLinus Torvalds1-1/+7
Pull rust updates from Miguel Ojeda: "The first set of changes after the merge, the major ones being: - String and formatting: new types 'CString', 'CStr', 'BStr' and 'Formatter'; new macros 'c_str!', 'b_str!' and 'fmt!'. - Errors: the rest of the error codes from 'errno-base.h', as well as some 'From' trait implementations for the 'Error' type. - Printing: the rest of the 'pr_*!' levels and the continuation one 'pr_cont!', as well as a new sample. - 'alloc' crate: new constructors 'try_with_capacity()' and 'try_with_capacity_in()' for 'RawVec' and 'Vec'. - Procedural macros: new macros '#[vtable]' and 'concat_idents!', as well as better ergonomics for 'module!' users. - Asserting: new macros 'static_assert!', 'build_error!' and 'build_assert!', as well as a new crate 'build_error' to support them. - Vocabulary types: new types 'Opaque' and 'Either'. - Debugging: new macro 'dbg!'" * tag 'rust-6.2' of https://github.com/Rust-for-Linux/linux: (28 commits) rust: types: add `Opaque` type rust: types: add `Either` type rust: build_assert: add `build_{error,assert}!` macros rust: add `build_error` crate rust: static_assert: add `static_assert!` macro rust: std_vendor: add `dbg!` macro based on `std`'s one rust: str: add `fmt!` macro rust: str: add `CString` type rust: str: add `Formatter` type rust: str: add `c_str!` macro rust: str: add `CStr` unit tests rust: str: implement several traits for `CStr` rust: str: add `CStr` type rust: str: add `b_str!` macro rust: str: add `BStr` type rust: alloc: add `Vec::try_with_capacity{,_in}()` constructors rust: alloc: add `RawVec::try_with_capacity_in()` constructor rust: prelude: add `error::code::*` constant items rust: error: add `From` implementations for `Error` rust: error: add codes from `errno-base.h` ...
2022-12-12Merge tag 'soc-dt-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds2-1/+24
Pull ARM SoC DT updates from Arnd Bergmann: "The devicetree changes contain exactly 1000 non-merge changesets, including a number of new arm64 SoC variants from Qualcomm and Apple, as well as the Renesas r9a07g043f/u chip in both arm64 and riscv variants. While we have occasionally merged support for non-arm SoCs in the past, this is now the normal path for riscv devicetree files. The most notable changes, by SoC platform, are: - The Apple T6000 (M1 Pro), T6001 (M1 Max) and T6002 (M1 Ultra) chips now have initial support. This is particularly nice as I am typing this on a T6002 Mac Studio with only a small number of driver patches. - Qualcomm MSM8996 Pro (Snapdragon 821), SM6115 (Snapdragon 662), SM4250 (Snapdragon 460), SM6375 (Snapdragon 695), SDM670 (Snapdragon 670), MSM8976 (Snapdragon 652) and MSM8956 (Snapdragon 650) are all mobile phone chips that are closely related to others we already support. Adding those helps support more phones and we add several models from Sony (Xperia 10 IV, 5 IV, X, and X compact), OnePlus (One, 3, 3T, and Nord N100), Xiaomi (Poco F1, Mi6), Huawei (Watch) and Google (Pixel 3a). There are also new variants of the Herobrine and Trogdor chromebook motherboards. SA8540P is an automotive SoC used in the Qdrive-3 development platform - Rockchips gains no new SoC variants, but a lot of new boards: three mobile gaming systems based on RK3326 Odroid-Go/rg351 family, two more Anbernic gaming systems based on RK3566 and a number of other RK356x based single-board computers. - Renesas RZ/G2UL (r9a07g043) was already supported for arm64, but as the newly added RZ/Five is based on the same design, this now gets reorganized in order to share most of the dts description between the two and add the RZ/Five SMARC EVK board support. Aside from that, there are the usual changes all over the tree: - New boards on other platforms contain two ASpeed BMC users, two Broadcom based Wifi routers, Zyxel NSA310S NAS, the i.MX6 based Kobo Aura2 ebook reader, two i.MX8 based development boards, two Uniphier Pro5 development boards, the STM32MP1 testbench board from DHCOR, the TI K3 based BeagleBone AI-64 board, and the Mediatek Helio X10 based Sony Xperia M5 phone. - The Starfive JH7100 source gets reorganized in order to support the VisionFive V1 board. - Minor updates and cleanups for Intel SoCFPGA, Marvell PXA168, TI, ST, NXP, Apple, Broadcom, Juno, Marvell MVEBU, at91, nuvoton, Tegra, Mediatek, Renesas, Hisilicon, Allwinner, Samsung, ux500, spear, ... The treewide cleanups now have a lot of fixes for cache nodes and other binding violoations. - Somewhat larger sets of reworks for NVIDIA Tegra, Qualcomm and Renesas platforms, adding a lot more on-chip device support - A rework of the way that DTB overlays are built" * tag 'soc-dt-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (979 commits) arm64: dts: apple: t6002: Fix GPU power domains arm64: dts: apple: t600x-pmgr: Fix search & replace typo arm64: dts: apple: Add t8103 L1/L2 cache properties and nodes arm64: dts: apple: Rename dart-sio* to sio-dart* arch: arm64: apple: t600x: Use standard "iommu" node name arch: arm64: apple: t8103: Use standard "iommu" node name ARM: dts: socfpga: Fix pca9548 i2c-mux node name dt-bindings: iio: adc: qcom,spmi-vadc: fix PM8350 define dt-bindings: iio: adc: qcom,spmi-vadc: extend example arm64: dts: qcom: sc8280xp: fix UFS DMA coherency arm64: dts: qcom: sc7280: Add DT for sc7280-herobrine-zombie arm64: dts: qcom: sm8250-sony-xperia-edo: fix no-mmc property for SDHCI arm64: dts: qcom: sdm845-sony-xperia-tama: fix no-mmc property for SDHCI arm64: dts: qcom: sda660-inforce-ifc6560: fix no-mmc property for SDHCI arm64: dts: qcom: sa8155p-adp: fix no-mmc property for SDHCI arm64: dts: qcom: qrb5165-rb: fix no-mmc property for SDHCI arm64: dts: qcom: sm8450: align MMC node names with dtschema arm64: dts: qcom: sc7180-trogdor: use generic node names arm64: dts: qcom: sm8450-hdk: add sound support arm64: dts: qcom: sm8450: add Soundwire and LPASS ...
2022-12-12Merge tag 'arm64-upstream' of ↵Linus Torvalds2-1/+6
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Will Deacon: "The highlights this time are support for dynamically enabling and disabling Clang's Shadow Call Stack at boot and a long-awaited optimisation to the way in which we handle the SVE register state on system call entry to avoid taking unnecessary traps from userspace. Summary: ACPI: - Enable FPDT support for boot-time profiling - Fix CPU PMU probing to work better with PREEMPT_RT - Update SMMUv3 MSI DeviceID parsing to latest IORT spec - APMT support for probing Arm CoreSight PMU devices CPU features: - Advertise new SVE instructions (v2.1) - Advertise range prefetch instruction - Advertise CSSC ("Common Short Sequence Compression") scalar instructions, adding things like min, max, abs, popcount - Enable DIT (Data Independent Timing) when running in the kernel - More conversion of system register fields over to the generated header CPU misfeatures: - Workaround for Cortex-A715 erratum #2645198 Dynamic SCS: - Support for dynamic shadow call stacks to allow switching at runtime between Clang's SCS implementation and the CPU's pointer authentication feature when it is supported (complete with scary DWARF parser!) Tracing and debug: - Remove static ftrace in favour of, err, dynamic ftrace! - Seperate 'struct ftrace_regs' from 'struct pt_regs' in core ftrace and existing arch code - Introduce and implement FTRACE_WITH_ARGS on arm64 to replace the old FTRACE_WITH_REGS - Extend 'crashkernel=' parameter with default value and fallback to placement above 4G physical if initial (low) allocation fails SVE: - Optimisation to avoid disabling SVE unconditionally on syscall entry and just zeroing the non-shared state on return instead Exceptions: - Rework of undefined instruction handling to avoid serialisation on global lock (this includes emulation of user accesses to the ID registers) Perf and PMU: - Support for TLP filters in Hisilicon's PCIe PMU device - Support for the DDR PMU present in Amlogic Meson G12 SoCs - Support for the terribly-named "CoreSight PMU" architecture from Arm (and Nvidia's implementation of said architecture) Misc: - Tighten up our boot protocol for systems with memory above 52 bits physical - Const-ify static keys to satisty jump label asm constraints - Trivial FFA driver cleanups in preparation for v1.1 support - Export the kernel_neon_* APIs as GPL symbols - Harden our instruction generation routines against instrumentation - A bunch of robustness improvements to our arch-specific selftests - Minor cleanups and fixes all over (kbuild, kprobes, kfence, PMU, ...)" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (151 commits) arm64: kprobes: Return DBG_HOOK_ERROR if kprobes can not handle a BRK arm64: kprobes: Let arch do_page_fault() fix up page fault in user handler arm64: Prohibit instrumentation on arch_stack_walk() arm64:uprobe fix the uprobe SWBP_INSN in big-endian arm64: alternatives: add __init/__initconst to some functions/variables arm_pmu: Drop redundant armpmu->map_event() in armpmu_event_init() kselftest/arm64: Allow epoll_wait() to return more than one result kselftest/arm64: Don't drain output while spawning children kselftest/arm64: Hold fp-stress children until they're all spawned arm64/sysreg: Remove duplicate definitions from asm/sysreg.h arm64/sysreg: Convert ID_DFR1_EL1 to automatic generation arm64/sysreg: Convert ID_DFR0_EL1 to automatic generation arm64/sysreg: Convert ID_AFR0_EL1 to automatic generation arm64/sysreg: Convert ID_MMFR5_EL1 to automatic generation arm64/sysreg: Convert MVFR2_EL1 to automatic generation arm64/sysreg: Convert MVFR1_EL1 to automatic generation arm64/sysreg: Convert MVFR0_EL1 to automatic generation arm64/sysreg: Convert ID_PFR2_EL1 to automatic generation arm64/sysreg: Convert ID_PFR1_EL1 to automatic generation arm64/sysreg: Convert ID_PFR0_EL1 to automatic generation ...
2022-12-09bpf: Rework process_dynptr_funcKumar Kartikeya Dwivedi1-0/+1
Recently, user ringbuf support introduced a PTR_TO_DYNPTR register type for use in callback state, because in case of user ringbuf helpers, there is no dynptr on the stack that is passed into the callback. To reflect such a state, a special register type was created. However, some checks have been bypassed incorrectly during the addition of this feature. First, for arg_type with MEM_UNINIT flag which initialize a dynptr, they must be rejected for such register type. Secondly, in the future, there are plans to add dynptr helpers that operate on the dynptr itself and may change its offset and other properties. In all of these cases, PTR_TO_DYNPTR shouldn't be allowed to be passed to such helpers, however the current code simply returns 0. The rejection for helpers that release the dynptr is already handled. For fixing this, we take a step back and rework existing code in a way that will allow fitting in all classes of helpers and have a coherent model for dealing with the variety of use cases in which dynptr is used. First, for ARG_PTR_TO_DYNPTR, it can either be set alone or together with a DYNPTR_TYPE_* constant that denotes the only type it accepts. Next, helpers which initialize a dynptr use MEM_UNINIT to indicate this fact. To make the distinction clear, use MEM_RDONLY flag to indicate that the helper only operates on the memory pointed to by the dynptr, not the dynptr itself. In C parlance, it would be equivalent to taking the dynptr as a point to const argument. When either of these flags are not present, the helper is allowed to mutate both the dynptr itself and also the memory it points to. Currently, the read only status of the memory is not tracked in the dynptr, but it would be trivial to add this support inside dynptr state of the register. With these changes and renaming PTR_TO_DYNPTR to CONST_PTR_TO_DYNPTR to better reflect its usage, it can no longer be passed to helpers that initialize a dynptr, i.e. bpf_dynptr_from_mem, bpf_ringbuf_reserve_dynptr. A note to reviewers is that in code that does mark_stack_slots_dynptr, and unmark_stack_slots_dynptr, we implicitly rely on the fact that PTR_TO_STACK reg is the only case that can reach that code path, as one cannot pass CONST_PTR_TO_DYNPTR to helpers that don't set MEM_RDONLY. In both cases such helpers won't be setting that flag. The next patch will add a couple of selftest cases to make sure this doesn't break. Fixes: 205715673844 ("bpf: Add bpf_user_ringbuf_drain() helper") Acked-by: Joanne Koong <joannelkoong@gmail.com> Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Link: https://lore.kernel.org/r/20221207204141.308952-4-memxor@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-12-06Merge branch 'for-next/kbuild' into for-next/coreWill Deacon1-1/+0
* for-next/kbuild: arm64: remove special treatment for the link order of head.o
2022-12-04rust: add `build_error` crateGary Guo1-1/+7
The `build_error` crate provides a function `build_error` which will panic at compile-time if executed in const context and, by default, will cause a build error if not executed at compile time and the optimizer does not optimise away the call. The `CONFIG_RUST_BUILD_ASSERT_ALLOW` kernel option allows to relax the default build failure and convert it to a runtime check. If the runtime check fails, `panic!` will be called. Its functionality will be exposed to users as a couple macros in the `kernel` crate in the following patch, thus some documentation here refers to them for simplicity. Signed-off-by: Gary Guo <gary@garyguo.net> Reviewed-by: Wei Liu <wei.liu@kernel.org> [Reworded, adapted for upstream and applied latest changes] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2022-12-02Merge tag 'v6.1-rc7' into iommufd.git for-nextJason Gunthorpe6-27/+13
Resolve conflicts in drivers/vfio/vfio_main.c by using the iommfd version. The rc fix was done a different way when iommufd patches reworked this code. Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2022-12-01checkpatch: add check for array allocator family argument orderLiao Chang1-1/+1
These array allocator family are sometimes misused with the first and second arguments switched. Same issue with calloc, kvcalloc, kvmalloc_array etc. Bleat if sizeof is the first argument. Link: https://lore.kernel.org/lkml/5374345c-7973-6a3c-d559-73bf4ac15079@redhat.com/ Link: https://lkml.kernel.org/r/20221104070523.60296-1-liaochang1@huawei.com Signed-off-by: Liao Chang <liaochang1@huawei.com> Acked-by: Joe Perches <joe@perches.com> Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com> Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Andy Whitcroft <apw@canonical.com> Cc: Bagas Sanjaya <bagasdotme@gmail.com> Cc: Dwaipayan Ray <dwaipayanray1@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski3-6/+7
tools/lib/bpf/ringbuf.c 927cbb478adf ("libbpf: Handle size overflow for ringbuf mmap") b486d19a0ab0 ("libbpf: checkpatch: Fixed code alignments in ringbuf.c") https://lore.kernel.org/all/20221121122707.44d1446a@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-29scripts/kernel-doc: support EXPORT_SYMBOL_NS_GPL() with -exportJason Gunthorpe1-4/+8
Parse EXPORT_SYMBOL_NS_GPL() in addition to EXPORT_SYMBOL_GPL() for use with the -export flag. Link: https://lore.kernel.org/r/4-v6-a196d26f289e+11787-iommufd_jgg@nvidia.com Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2022-11-27Merge tag 'objtool_urgent_for_v6.1_rc7' of ↵Linus Torvalds1-3/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool fix from Borislav Petkov: - Handle different output of readelf on different distros running ppc64le which confuses faddr2line's function offsets conversion * tag 'objtool_urgent_for_v6.1_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: scripts/faddr2line: Fix regression in name resolution on ppc64le
2022-11-24scripts: add rust in scripts/Makefile.packageParan Lee1-2/+2
Add rust argument at TAR_CONTENT in scripts/Makefile.package script with alphabetical order. Signed-off-by: Paran Lee <p4ranlee@gmail.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2022-11-23scripts/kallsyms.c Make the comment up-to-date with current implementationYuma Ueda1-1/+2
The comment in scripts/kallsyms.c describing the usage of scripts/kallsyms does not reflect the latest implementation. Fix the comment to be equivalent to what the usage() function prints. Signed-off-by: Yuma Ueda <cyan@0x00a1e9.dev> Reviewed-by: Miguel Ojeda <ojeda@kernel.org> Link: https://lore.kernel.org/r/20221118133631.4554-1-cyan@0x00a1e9.dev Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-22Merge tag 'v6.1-rc6' into x86/core, to resolve conflictsIngo Molnar4-22/+7
Resolve conflicts between these commits in arch/x86/kernel/asm-offsets.c: # upstream: debc5a1ec0d1 ("KVM: x86: use a separate asm-offsets.c file") # retbleed work in x86/core: 5d8213864ade ("x86/retbleed: Add SKL return thunk") ... and these commits in include/linux/bpf.h: # upstram: 18acb7fac22f ("bpf: Revert ("Fix dispatcher patchable function entry to 5 bytes nop")") # x86/core commits: 931ab63664f0 ("x86/ibt: Implement FineIBT") bea75b33895f ("x86/Kconfig: Introduce function padding") The latter two modify BPF_DISPATCHER_ATTRIBUTES(), which was removed upstream. Conflicts: arch/x86/kernel/asm-offsets.c include/linux/bpf.h Signed-off-by: Ingo Molnar <mingo@kernel.org>
2022-11-19scripts/spelling.txt: add more spellings to spelling.txtColin Ian King1-1/+32
Some of the more common spelling mistakes and typos that I've found while fixing up spelling mistakes in the kernel in the past year. Link: https://lkml.kernel.org/r/20221108110712.114611-1-colin.i.king@gmail.com Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-19scripts: checkpatch: allow "case" macrosStanislaw Gruszka1-0/+1
Do not report errors like below: ./scripts/checkpatch.pl -f drivers/net/wireless/ath/ath10k/wmi.h ERROR: Macros with complex values should be enclosed in parentheses +#define C2S(x) case x: return #x since many "case ..." macros are already used by some in-kernel drivers. Link: https://lkml.kernel.org/r/20221027134334.164301-1-stf_xl@wp.pl Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-19checkpatch: add warning for non-lore mailing list URLsBjorn Helgaas1-0/+17
The lkml.org, marc.info, spinics.net, etc archives are not quite as useful as lore.kernel.org because they use different styles, add advertising, and may disappear in the future. The lore archives are more consistent and more likely to stick around, so prefer https://lore.kernel.org URLs when they exist. [bhelgaas@google.com: only warn if we see "http" before the archive hostname] Link: https://lkml.kernel.org/r/20221114224315.GA939630@bhelgaas Link: https://lkml.kernel.org/r/20221019202843.40810-1-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Peter Collingbourne <pcc@google.com> Cc: Andy Whitcroft <apw@canonical.com> Cc: Dwaipayan Ray <dwaipayanray1@gmail.com> Cc: Kees Cook <keescook@chromium.org> Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com> Cc: Randy Dunlap <rdunlap@infradead.org> # build-tested Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-18kbuild: Cleanup DT Overlay intermediate files as appropriateAndrew Davis1-0/+2
%.dtbo.o and %.dtbo.S files are used to build-in DT Overlay. They should should not be removed by Make or the kernel will be needlessly rebuilt. These should be removed by "clean" and ignored by git like other intermediate files. Reported-by: Andy Shevchenko <andriy.shevchenko@intel.com> Signed-off-by: Andrew Davis <afd@ti.com> Fixes: 941214a512d8 ("kbuild: Allow DTB overlays to built into .dtbo.S files") Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Masahiro Yamada <masahiroy@kernel.org> Link: https://lore.kernel.org/r/20221114205939.27994-1-afd@ti.com Signed-off-by: Rob Herring <robh@kernel.org>
2022-11-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+1
include/linux/bpf.h 1f6e04a1c7b8 ("bpf: Fix offset calculation error in __copy_map_value and zero_map_value") aa3496accc41 ("bpf: Refactor kptr_off_tab into btf_record") f71b2f64177a ("bpf: Refactor map->off_arr handling") https://lore.kernel.org/all/20221114095000.67a73239@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-17kbuild: Restore .version auto-increment behaviour for Debian packagesMarc Zyngier1-1/+1
Since 2df8220cc511 ("kbuild: build init/built-in.a just once"), generating Debian packages using 'make bindeb-pkg' results in packages that are stuck to the same .version, leading to unexpected behaviours (multiple packages with the same version). That's because the mkdebian script samples the build version before building the kernel, and forces the use of that version number for the actual build. Restore the previous behaviour by calling init/build-version instead of reading the .version file. This is likely to result in too many .version bumps, but this is what was happening before (although the bump was affecting builds made after the current one). Fixes: 2df8220cc511 ("kbuild: build init/built-in.a just once") Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2022-11-16scripts/faddr2line: Fix regression in name resolution on ppc64leSrikar Dronamraju1-3/+4
Commit 1d1a0e7c5100 ("scripts/faddr2line: Fix overlapping text section failures") can cause faddr2line to fail on ppc64le on some distributions, while it works fine on other distributions. The failure can be attributed to differences in the readelf output. $ ./scripts/faddr2line vmlinux find_busiest_group+0x00 no match for find_busiest_group+0x00 On ppc64le, readelf adds the localentry tag before the symbol name on some distributions, and adds the localentry tag after the symbol name on other distributions. This problem has been discussed previously: https://lore.kernel.org/bpf/20191211160133.GB4580@calabresa/ This problem can be overcome by filtering out the localentry tags in the readelf output. Similar fixes are already present in the kernel by way of the following commits: 1fd6cee127e2 ("libbpf: Fix VERSIONED_SYM_COUNT number parsing") aa915931ac3e ("libbpf: Fix readelf output parsing for Fedora") [jpoimboe: rework commit log] Fixes: 1d1a0e7c5100 ("scripts/faddr2line: Fix overlapping text section failures") Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Reviewed-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Link: https://lore.kernel.org/r/20220927075211.897152-1-srikar@linux.vnet.ibm.com Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Peter Zijlstra <peterz@infradead.org>
2022-11-13kallsyms: Reduce the memory occupied by kallsyms_seqs_of_names[]Zhen Lei1-1/+4
kallsyms_seqs_of_names[] records the symbol index sorted by address, the maximum value in kallsyms_seqs_of_names[] is the number of symbols. And 2^24 = 16777216, which means that three bytes are enough to store the index. This can help us save (1 * kallsyms_num_syms) bytes of memory. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2022-11-13kallsyms: Correctly sequence symbols when CONFIG_LTO_CLANG=yZhen Lei2-2/+38
LLVM appends various suffixes for local functions and variables, suffixes observed: - foo.llvm.[0-9a-f]+ - foo.[0-9a-f]+ Therefore, when CONFIG_LTO_CLANG=y, kallsyms_lookup_name() needs to truncate the suffix of the symbol name before comparing the local function or variable name. Old implementation code: - if (strcmp(namebuf, name) == 0) - return kallsyms_sym_address(i); - if (cleanup_symbol_name(namebuf) && strcmp(namebuf, name) == 0) - return kallsyms_sym_address(i); The preceding process is traversed by address from low to high. That is, for those with the same name after the suffix is removed, the one with the smallest address is returned first. Therefore, when sorting in the tool, if the raw names are the same, they should be sorted by address in ascending order. ASCII[.] = 2e ASCII[0-9] = 30,39 ASCII[A-Z] = 41,5a ASCII[_] = 5f ASCII[a-z] = 61,7a According to the preceding ASCII code values, the following sorting result is strictly followed. --------------------------------- | main-key | sub-key | |---------------------------------| | | addr_lowest | | <name> | ... | | <name>.<suffix> | ... | | | addr_highest | |---------------------------------| | <name>?<others> | | //? is [_A-Za-z0-9] --------------------------------- Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2022-11-13kallsyms: Improve the performance of kallsyms_lookup_name()Zhen Lei1-0/+37
Currently, to search for a symbol, we need to expand the symbols in 'kallsyms_names' one by one, and then use the expanded string for comparison. It's O(n). If we sort names in ascending order like addresses, we can also use binary search. It's O(log(n)). In order not to change the implementation of "/proc/kallsyms", the table kallsyms_names[] is still stored in a one-to-one correspondence with the address in ascending order. Add array kallsyms_seqs_of_names[], it's indexed by the sequence number of the sorted names, and the corresponding content is the sequence number of the sorted addresses. For example: Assume that the index of NameX in array kallsyms_seqs_of_names[] is 'i', the content of kallsyms_seqs_of_names[i] is 'k', then the corresponding address of NameX is kallsyms_addresses[k]. The offset in kallsyms_names[] is get_symbol_offset(k). Note that the memory usage will increase by (4 * kallsyms_num_syms) bytes, the next two patches will reduce (1 * kallsyms_num_syms) bytes and properly handle the case CONFIG_LTO_CLANG=y. Performance test results: (x86) Before: min=234, max=10364402, avg=5206926 min=267, max=11168517, avg=5207587 After: min=1016, max=90894, avg=7272 min=1014, max=93470, avg=7293 The average lookup performance of kallsyms_lookup_name() improved 715x. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2022-11-13scripts/kallsyms: rename build_initial_tok_table()Zhen Lei1-2/+2
Except for the function build_initial_tok_table(), no token abbreviation is used elsewhere. $ cat scripts/kallsyms.c | grep tok | wc -l 33 $ cat scripts/kallsyms.c | grep token | wc -l 31 Here, it would be clearer to use the full name. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2022-11-11Merge tag 's390-6.1-4' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Alexander Gordeev: - fix memcpy warning about field-spanning write in zcrypt driver - minor updates to defconfigs - remove CONFIG_DEBUG_INFO_BTF from all defconfigs and add btf.config addon config file. It significantly decreases compile time and allows quickly enabling that option into the current kernel config - add kasan.config addon config file which allows to easily enable KASAN into the current kernel config - binutils commit 906f69cf65da ("IBM zSystems: Issue error for *DBL relocs on misaligned symbols") caused several link errors. Always build relocatable kernel to avoid this problem - raise the minimum clang version to 15.0.0 to avoid silent generation of a corrupted code * tag 's390-6.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: scripts/min-tool-version.sh: raise minimum clang version to 15.0.0 for s390 s390: always build relocatable kernel s390/configs: add kasan.config addon config file s390/configs: move CONFIG_DEBUG_INFO_BTF into btf.config addon config s390: update defconfigs s390/zcrypt: fix warning about field-spanning write
2022-11-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-20/+5
drivers/net/can/pch_can.c ae64438be192 ("can: dev: fix skb drop check") 1dd1b521be85 ("can: remove obsolete PCH CAN driver") https://lore.kernel.org/all/20221110102509.1f7d63cc@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-10scripts/dtc: Update to upstream version v1.6.1-63-g55778a03df61Rob Herring13-48/+124
It's been a while since the last sync and Lee needs commit 73590342fc85 ("libfdt: prevent integer overflow in fdt_next_tag"). This adds the following commits from upstream: 55778a03df61 libfdt: tests: add get_next_tag_invalid_prop_len 73590342fc85 libfdt: prevent integer overflow in fdt_next_tag 035fb90d5375 libfdt: add fdt_get_property_by_offset_w helper 98a07006c48d Makefile: fix infinite recursion by dropping non-existent `%.output` a036cc7b0c10 Makefile: limit make re-execution to avoid infinite spin c6e92108bcd9 libdtc: remove duplicate judgments e37c25677dc9 Don't generate erroneous fixups from reference to path 50454658f2b5 libfdt: Don't mask fdt_get_name() returned error e64a204196c9 manual.txt: Follow README.md and remove Jon f508c83fe6f0 Update README in MANIFEST.in and setup.py to README.md c2ccf8a77dd2 Add description of Signed-off-by lines 90b9d9de42ca Split out information for contributors to CONTRIBUTING.md 0ee1d479b23a Remove Jon Loeliger from maintainers list b33a73c62c1c Convert README to README.md 7ad60734b1c1 Allow static building with meson fd9b8c96c780 Allow static building with make fda71da26e7f libfdt: Handle failed get_name() on BEGIN_NODE c7c7f17a83d5 Fix test script to run also on dash shell 01f23ffe1679 Add missing relref_merge test to meson test list ed310803ea89 pylibfdt: add FdtRo.get_path() c001fc01a43e pylibfdt: fix swig build in install 26c54f840d23 tests: add test cases for label-relative path references ec7986e682cf dtc: introduce label relative path references 651410e54cb9 util: introduce xstrndup helper 4048aed12b81 setup.py: fix out of tree build ff5afb96d0c0 Handle integer overflow in check_property_phandle_args() ca7294434309 README: Explain how to add a new API function c0c2e115f82e Fix a UB when fdt_get_string return null cd5f69cbc0d4 tests: setprop_inplace: use xstrdup instead of unchecked strdup a04f69025003 pylibfdt: add Property.as_*int*_array() 83102717d7c4 pylibfdt: add Property.as_stringlist() d152126bb029 Fix Python crash on getprop deallocation 17739b7ef510 Support 'r' format for printing raw bytes with fdtget 45f3d1a095dd libfdt: overlay: make overlay_get_target() public c19a4bafa514 libfdt: fix an incorrect integer promotion 1cc41b1c969f pylibfdt: Add packaging metadata db72398cd437 README: Update pylibfdt install instructions 383e148b70a4 pylibfdt: fix with Python 3.10 23b56cb7e189 pylibfdt: Move setup.py to the top level 69a760747d8d pylibfdt: Split setup.py author name and email 0b106a77dbdc pylibfdt: Use setuptools_scm for the version c691776ddb26 pylibfdt: Use setuptools instead of distutils 5216f3f1bbb7 libfdt: Add static lib to meson build 4eda2590f481 CI: Cirrus: bump used FreeBSD from 12.1 to 13.0 Link: https://lore.kernel.org/r/20221101181427.1808703-1-robh@kernel.org/ Signed-off-by: Rob Herring <robh@kernel.org>
2022-11-09arm64: unwind: add asynchronous unwind tables to kernel and modulesArd Biesheuvel1-0/+6
Enable asynchronous unwind table generation for both the core kernel as well as modules, and emit the resulting .eh_frame sections as init code so we can use the unwind directives for code patching at boot or module load time. This will be used by dynamic shadow call stack support, which will rely on code patching rather than compiler codegen to emit the shadow call stack push and pop instructions. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Sami Tolvanen <samitolvanen@google.com> Tested-by: Sami Tolvanen <samitolvanen@google.com> Link: https://lore.kernel.org/r/20221027155908.1940624-2-ardb@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2022-11-09scripts/min-tool-version.sh: raise minimum clang version to 15.0.0 for s390Heiko Carstens1-1/+1
Before version 15.0.0 llvm's integrated assembler may silently generate corrupted code on s390. See e.g. commit e9953b729b78 ("s390/boot: workaround llvm IAS bug") for further details. While there have been workarounds applied for all known existing locations, there is nothing that prevents that new code with problematic patterns will be added. Therefore raise the minimum clang version to 15.0.0. Note that llvm commit e547b04d5b2c ("[SystemZ] Bugfix for symbolic displacements."), which is included in 15.0.0, fixes the broken code generation. Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Acked-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20221031123456.3872220-1-hca@linux.ibm.com Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2022-11-07arm64: remove special treatment for the link order of head.oMasahiro Yamada1-1/+0
In the previous discussion (see the Link tag), Ard pointed out that arm/arm64/kernel/head.o does not need any special treatment - the only piece that must appear right at the start of the binary image is the image header which is emitted into .head.text. The linker script does the right thing to do. The build system does not need to manipulate the link order of head.o. Link: https://lore.kernel.org/lkml/CAMj1kXH77Ja8bSsq2Qj8Ck9iSZKw=1F8Uy-uAWGVDm4-CG=EuA@mail.gmail.com/ Suggested-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu> Link: https://lore.kernel.org/r/20221012233500.156764-1-masahiroy@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2022-11-02Merge tag 'for-netdev' of ↵Jakub Kicinski1-0/+2
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Daniel Borkmann says: ==================== bpf-next 2022-11-02 We've added 70 non-merge commits during the last 14 day(s) which contain a total of 96 files changed, 3203 insertions(+), 640 deletions(-). The main changes are: 1) Make cgroup local storage available to non-cgroup attached BPF programs such as tc BPF ones, from Yonghong Song. 2) Avoid unnecessary deadlock detection and failures wrt BPF task storage helpers, from Martin KaFai Lau. 3) Add LLVM disassembler as default library for dumping JITed code in bpftool, from Quentin Monnet. 4) Various kprobe_multi_link fixes related to kernel modules, from Jiri Olsa. 5) Optimize x86-64 JIT with emitting BMI2-based shift instructions, from Jie Meng. 6) Improve BPF verifier's memory type compatibility for map key/value arguments, from Dave Marchevsky. 7) Only create mmap-able data section maps in libbpf when data is exposed via skeletons, from Andrii Nakryiko. 8) Add an autoattach option for bpftool to load all object assets, from Wang Yufen. 9) Various memory handling fixes for libbpf and BPF selftests, from Xu Kuohai. 10) Initial support for BPF selftest's vmtest.sh on arm64, from Manu Bretelle. 11) Improve libbpf's BTF handling to dedup identical structs, from Alan Maguire. 12) Add BPF CI and denylist documentation for BPF selftests, from Daniel Müller. 13) Check BPF cpumap max_entries before doing allocation work, from Florian Lehner. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (70 commits) samples/bpf: Fix typo in README bpf: Remove the obsolte u64_stats_fetch_*_irq() users. bpf: check max_entries before allocating memory bpf: Fix a typo in comment for DFS algorithm bpftool: Fix spelling mistake "disasembler" -> "disassembler" selftests/bpf: Fix bpftool synctypes checking failure selftests/bpf: Panic on hard/soft lockup docs/bpf: Add documentation for new cgroup local storage selftests/bpf: Add test cgrp_local_storage to DENYLIST.s390x selftests/bpf: Add selftests for new cgroup local storage selftests/bpf: Fix test test_libbpf_str/bpf_map_type_str bpftool: Support new cgroup local storage libbpf: Support new cgroup local storage bpf: Implement cgroup storage available to non-cgroup-attached bpf progs bpf: Refactor some inode/task/sk storage functions for reuse bpf: Make struct cgroup btf id global selftests/bpf: Tracing prog can still do lookup under busy lock selftests/bpf: Ensure no task storage failure for bpf_lsm.s prog due to deadlock detection bpf: Add new bpf_task_storage_delete proto with no deadlock detection bpf: bpf_task_storage_delete_recur does lookup first before the deadlock check ... ==================== Link: https://lore.kernel.org/r/20221102062120.5724-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-02kconfig: fix segmentation fault in menuconfig searchMasahiro Yamada1-19/+4
Since commit d05377e184fc ("kconfig: Create links to main menu items in search"), menuconfig shows a jump key next to "Main menu" if the nearest visible parent is the rootmenu. If you press that jump key, menuconfig crashes with a segmentation fault. For example, do this: $ make ARCH=arm64 allnoconfig menuconfig Press '/' to search for the string "ACPI". Press '1' to choose "(1) Main menu". Then, menuconfig crashed with a segmentation fault. The following code in search_conf() conf(targets[i]->parent, targets[i]); results in NULL pointer dereference because targets[i] is the rootmenu, which does not have a parent. Commit d05377e184fc tried to fix the issue of top-level items not having a jump key, but adding the "Main menu" was not the right fix. The correct fix is to show the searched item itself. This fixes another weird behavior described in the comment block. Fixes: d05377e184fc ("kconfig: Create links to main menu items in search") Reported-by: Johannes Zink <j.zink@pengutronix.de> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: Bagas Sanjaya <bagasdotme@gmail.com> Tested-by: Johannes Zink <j.zink@pengutronix.de>
2022-11-01x86/ibt: Implement FineIBTPeter Zijlstra1-0/+1
Implement an alternative CFI scheme that merges both the fine-grained nature of kCFI but also takes full advantage of the coarse grained hardware CFI as provided by IBT. To contrast: kCFI is a pure software CFI scheme and relies on being able to read text -- specifically the instruction *before* the target symbol, and does the hash validation *before* doing the call (otherwise control flow is compromised already). FineIBT is a software and hardware hybrid scheme; by ensuring every branch target starts with a hash validation it is possible to place the hash validation after the branch. This has several advantages: o the (hash) load is avoided; no memop; no RX requirement. o IBT WAIT-FOR-ENDBR state is a speculation stop; by placing the hash validation in the immediate instruction after the branch target there is a minimal speculation window and the whole is a viable defence against SpectreBHB. o Kees feels obliged to mention it is slightly more vulnerable when the attacker can write code. Obviously this patch relies on kCFI, but additionally it also relies on the padding from the call-depth-tracking patches. It uses this padding to place the hash-validation while the call-sites are re-written to modify the indirect target to be 16 bytes in front of the original target, thus hitting this new preamble. Notably, there is no hardware that needs call-depth-tracking (Skylake) and supports IBT (Tigerlake and onwards). Suggested-by: Joao Moreira (Intel) <joao@overdrivepizza.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20221027092842.634714496@infradead.org
2022-11-01x86: Add prefix symbols for function paddingPeter Zijlstra1-0/+1
When code is compiled with: -fpatchable-function-entry=${PADDING_BYTES},${PADDING_BYTES} functions will have PADDING_BYTES of NOP in front of them. Unwinders and other things that symbolize code locations will typically attribute these bytes to the preceding function. Given that these bytes nominally belong to the following symbol this mis-attribution is confusing. Inspired by the fact that CFI_CLANG emits __cfi_##name symbols to claim these bytes, use objtool to emit __pfx_##name symbols to do the same when CFI_CLANG is not used. This then shows the callthunk for symbol 'name' as: __pfx_##name+0x6/0x10 Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Yujie Liu <yujie.liu@intel.com> Link: https://lkml.kernel.org/r/20221028194453.592512209@infradead.org
2022-10-29string: Rewrite and add more kern-doc for the str*() functionsKees Cook1-1/+5
While there were varying degrees of kern-doc for various str*()-family functions, many needed updating and clarification, or to just be entirely written. Update (and relocate) existing kern-doc and add missing functions, sadly shaking my head at how many times I have written "Do not use this function". Include the results in the core kernel API doc. Cc: Bagas Sanjaya <bagasdotme@gmail.com> Cc: Andy Shevchenko <andy@kernel.org> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-hardening@vger.kernel.org Tested-by: Akira Yokosawa <akiyks@gmail.com> Link: https://lore.kernel.org/lkml/9b0cf584-01b3-3013-b800-1ef59fe82476@gmail.com Signed-off-by: Kees Cook <keescook@chromium.org>
2022-10-28riscv: remove special treatment for the link order of head.oJisheng Zhang1-1/+0
arch/riscv/kernel/head.o does not need any special treatment - the only requirement is the ".head.text" section must be placed before the normal ".text" section. The linker script does the right thing to do. The build system does not need to manipulate the link order of head.o. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Link: https://lore.kernel.org/r/20221018141200.1040-1-jszhang@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-10-27kbuild: fix typo in modpostWill McVicker1-1/+1
Commit f73edc8951b2 ("kbuild: unify two modpost invocations") introduced a typo (moudle.symvers-if-present) which results in the kernel's Module.symvers to not be included as a prerequisite for $(KBUILD_EXTMOD)/Module.symvers. Fix the typo to restore the intended functionality. Fixes: f73edc8951b2 ("kbuild: unify two modpost invocations") Signed-off-by: Will McVicker <willmcvicker@google.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2022-10-26Merge branch 'dt/dtbo-rename' into dt/nextRob Herring1-1/+22
2022-10-26kbuild: Allow DTB overlays to built into .dtbo.S filesAndrew Davis1-1/+19
DTB files can be built into the kernel by converting them to assembly files then assembling them into object files. We extend this here for DTB overlays with the .dtso extensions. We change the start and end delimiting tag prefix to make it clear that this data came from overlay files. [Based on patch by Frank Rowand <frank.rowand@sony.com>] Signed-off-by: Andrew Davis <afd@ti.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Frank Rowand <frowand.list@gmail.com> Tested-by: Frank Rowand <frowand.list@gmail.com> Link: https://lore.kernel.org/r/20221024173434.32518-3-afd@ti.com Signed-off-by: Rob Herring <robh@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-07 19:41:43 +0300