| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD
LoongArch KVM changes for v6.9
* Set reserved bits as zero in CPUCFG.
* Start SW timer only when vcpu is blocking.
* Do not restart SW timer when it is expired.
* Remove unnecessary CSR register saving during enter guest.
|
|
Commit 4a5838ad9d2d ("kbuild: Add extra gcc checks") added the
-Wpacked-bitfield-compat flag, but there is no need to add it
explicitly.
GCC manual says:
"This warning is enabled by default. Use -Wno-packed-bitfield-compat
to disable this warning."
The test code in the manual:
struct foo
{
char a:4;
char b:8;
} __attribute__ ((packed));
... emits "note: offset of packed bit-field ‘b’ has changed in GCC 4.4"
without W=3.
Let's remove it, as it is a default with GCC.
Clang does not support this flag, so its removal will not affect Clang
builds.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
|
|
Commit 25b146c5b8ce ("kbuild: allow Kbuild to start from any directory")
exported abs_srctree and abs_objtree to avoid recomputation after the
sub-make. However, this approach turned out to be fragile.
Commit 5fa94ceb793e ("kbuild: set correct abs_srctree and abs_objtree
for package builds") moved them above "ifneq ($(sub_make_done),1)",
eliminating the need for exporting them.
These are only needed in the top Makefile. If an absolute path is
required in sub-directories, you can use $(abspath ) or $(realpath )
as needed.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
|
|
Clang enables -Wenum-enum-conversion and -Wenum-compare-conditional
under -Wenum-conversion. A recent change in Clang strengthened these
warnings and they appear frequently in common builds, primarily due to
several instances in common headers but there are quite a few drivers
that have individual instances as well.
include/linux/vmstat.h:508:43: warning: arithmetic between different enumeration types ('enum zone_stat_item' and 'enum numa_stat_item') [-Wenum-enum-conversion]
508 | return vmstat_text[NR_VM_ZONE_STAT_ITEMS +
| ~~~~~~~~~~~~~~~~~~~~~ ^
509 | item];
| ~~~~
drivers/net/wireless/intel/iwlwifi/mvm/mac-ctxt.c:955:24: warning: conditional expression between different enumeration types ('enum iwl_mac_beacon_flags' and 'enum iwl_mac_beacon_flags_v1') [-Wenum-compare-conditional]
955 | flags |= is_new_rate ? IWL_MAC_BEACON_CCK
| ^ ~~~~~~~~~~~~~~~~~~
956 | : IWL_MAC_BEACON_CCK_V1;
| ~~~~~~~~~~~~~~~~~~~~~
drivers/net/wireless/intel/iwlwifi/mvm/mac-ctxt.c:1120:21: warning: conditional expression between different enumeration types ('enum iwl_mac_beacon_flags' and 'enum iwl_mac_beacon_flags_v1') [-Wenum-compare-conditional]
1120 | 0) > 10 ?
| ^
1121 | IWL_MAC_BEACON_FILS :
| ~~~~~~~~~~~~~~~~~~~
1122 | IWL_MAC_BEACON_FILS_V1;
| ~~~~~~~~~~~~~~~~~~~~~~
Doing arithmetic between or returning two different types of enums could
be a bug, so each of the instance of the warning needs to be evaluated.
Unfortunately, as mentioned above, there are many instances of this
warning in many different configurations, which can break the build when
CONFIG_WERROR is enabled.
To avoid introducing new instances of the warnings while cleaning up the
disruption for the majority of users, disable these warnings for the
default build while leaving them on for W=1 builds.
Cc: stable@vger.kernel.org
Closes: https://github.com/ClangBuiltLinux/linux/issues/2002
Link: https://github.com/llvm/llvm-project/commit/8c2ae42b3e1c6aa7c18f873edcebff7c0b45a37e
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Commit 5a1aa8a1aff6 ("kconfig: add named choice group") did not provide
enough explanation regarding its benefits. A use case was found in
another project [1] sometime later, this feature has never been used in
the kernel.
[1]: https://lore.kernel.org/all/201012150034.01356.yann.morin.1998@anciens.enib.fr/
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
|
|
Currently, get_symbol_str() uses a tricky approach to traverse the
associated menus.
With relevant menus now linked to the symbol using a linked list,
use list_for_each_entry() for iterating on the menus.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
|
|
Currently, there is no direct link from (struct symbol) to (struct menu).
It is still possible to access associated menus through the P_SYMBOL
property, because property::menu is the relevant menu entry, but it
results in complex code, as seen in get_symbol_str().
Use a linked list for simpler traversal of relevant menus.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"6 hotfixes. 4 are cc:stable and the remainder pertain to post-6.7
issues or aren't considered to be needed in earlier kernel versions"
* tag 'mm-hotfixes-stable-2024-03-07-16-17' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
scripts/gdb/symbols: fix invalid escape sequence warning
mailmap: fix Kishon's email
init/Kconfig: lower GCC version check for -Warray-bounds
mm, mmap: fix vma_merge() case 7 with vma_ops->close
mm: userfaultfd: fix unexpected change to src_folio when UFFDIO_MOVE fails
mm, vmscan: prevent infinite loop for costly GFP_NOIO | __GFP_RETRY_MAYFAIL allocations
|
|
With python 3.12, '\.' results in this warning
SyntaxWarning: invalid escape sequence '\.'
Link: https://lkml.kernel.org/r/20240304012507.240380-1-andrewjballance@gmail.com
Signed-off-by: Andrew Ballance <andrewjballance@gmail.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Koudai Iwahori <koudai@google.com>
Cc: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
net/core/page_pool_user.c
0b11b1c5c320 ("netdev: let netlink core handle -EMSGSIZE errors")
429679dcf7d9 ("page_pool: fix netlink dump stop/resume")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since commit aed65af1cc2f ("drivers: make device_type const"), the driver
core can properly handle constant struct device_type. Make sure that new
usages of the struct already enter the tree as const.
Link: https://lkml.kernel.org/r/20240218-device_cleanup-checkpatch-v1-1-8b0b89c4f6b1@marliere.net
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
arc, arm64, parisc and powerpc all have their own Kconfig symbols
in place of the common CONFIG_PAGE_SIZE_4KB symbols. Change these
so the common symbols are the ones that are actually used, while
leaving the arhcitecture specific ones as the user visible
place for configuring it, to avoid breaking user configs.
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> (powerpc32)
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
As discussed (see Links), there is some inertia to move to the recent
Sphinx versions for the doc build environment.
As first step, drop the version constraints and the related comments. As
sphinx depends on jinja2, jinja2 is pulled in automatically. So drop that.
Then, the sphinx-pre-install script will fail though with:
Can't get default sphinx version from ./Documentation/sphinx/requirements.txt at ./scripts/sphinx-pre-install line 305.
The script simply expects to parse a version constraint with Sphinx in the
requirements.txt. That version is used in the script for suggesting the
virtualenv directory name.
To suggest a virtualenv directory name, when there is no version given in
the requirements.txt, one could try to guess the version that would be
downloaded with 'pip install -r Documentation/sphinx/requirements.txt'.
However, there seems no simple way to get that version without actually
setting up the venv and running pip. So, instead, name the directory with
the fixed name 'sphinx_latest'.
Finally update the Sphinx build documentation to reflect this directory
name change.
Link: https://lore.kernel.org/linux-doc/874jf4m384.fsf@meer.lwn.net/
Link: https://lore.kernel.org/linux-doc/20240226093854.47830-1-lukas.bulwahn@gmail.com/
Reviewed-by: Akira Yokosawa <akiyks@gmail.com>
Tested-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20240301141800.30218-1-lukas.bulwahn@gmail.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-02-29
We've added 119 non-merge commits during the last 32 day(s) which contain
a total of 150 files changed, 3589 insertions(+), 995 deletions(-).
The main changes are:
1) Extend the BPF verifier to enable static subprog calls in spin lock
critical sections, from Kumar Kartikeya Dwivedi.
2) Fix confusing and incorrect inference of PTR_TO_CTX argument type
in BPF global subprogs, from Andrii Nakryiko.
3) Larger batch of riscv BPF JIT improvements and enabling inlining
of the bpf_kptr_xchg() for RV64, from Pu Lehui.
4) Allow skeleton users to change the values of the fields in struct_ops
maps at runtime, from Kui-Feng Lee.
5) Extend the verifier's capabilities of tracking scalars when they
are spilled to stack, especially when the spill or fill is narrowing,
from Maxim Mikityanskiy & Eduard Zingerman.
6) Various BPF selftest improvements to fix errors under gcc BPF backend,
from Jose E. Marchesi.
7) Avoid module loading failure when the module trying to register
a struct_ops has its BTF section stripped, from Geliang Tang.
8) Annotate all kfuncs in .BTF_ids section which eventually allows
for automatic kfunc prototype generation from bpftool, from Daniel Xu.
9) Several updates to the instruction-set.rst IETF standardization
document, from Dave Thaler.
10) Shrink the size of struct bpf_map resp. bpf_array,
from Alexei Starovoitov.
11) Initial small subset of BPF verifier prepwork for sleepable bpf_timer,
from Benjamin Tissoires.
12) Fix bpftool to be more portable to musl libc by using POSIX's
basename(), from Arnaldo Carvalho de Melo.
13) Add libbpf support to gcc in CORE macro definitions,
from Cupertino Miranda.
14) Remove a duplicate type check in perf_event_bpf_event,
from Florian Lehner.
15) Fix bpf_spin_{un,}lock BPF helpers to actually annotate them
with notrace correctly, from Yonghong Song.
16) Replace the deprecated bpf_lpm_trie_key 0-length array with flexible
array to fix build warnings, from Kees Cook.
17) Fix resolve_btfids cross-compilation to non host-native endianness,
from Viktor Malik.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (119 commits)
selftests/bpf: Test if shadow types work correctly.
bpftool: Add an example for struct_ops map and shadow type.
bpftool: Generated shadow variables for struct_ops maps.
libbpf: Convert st_ops->data to shadow type.
libbpf: Set btf_value_type_id of struct bpf_map for struct_ops.
bpf: Replace bpf_lpm_trie_key 0-length array with flexible array
bpf, arm64: use bpf_prog_pack for memory management
arm64: patching: implement text_poke API
bpf, arm64: support exceptions
arm64: stacktrace: Implement arch_bpf_stack_walk() for the BPF JIT
bpf: add is_async_callback_calling_insn() helper
bpf: introduce in_sleepable() helper
bpf: allow more maps in sleepable bpf programs
selftests/bpf: Test case for lacking CFI stub functions.
bpf: Check cfi_stubs before registering a struct_ops type.
bpf: Clarify batch lookup/lookup_and_delete semantics
bpf, docs: specify which BPF_ABS and BPF_IND fields were zero
bpf, docs: Fix typos in instruction-set.rst
selftests/bpf: update tcp_custom_syncookie to use scalar packet offset
bpf: Shrink size of struct bpf_map/bpf_array.
...
====================
Link: https://lore.kernel.org/r/20240301001625.8800-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- detect ".option arch" support on not-yet-released LLVM builds
- fix missing TLB flush when modifying non-leaf PTEs
- fixes for T-Head custom extensions
- fix for systems with the legacy PMU, that manifests as a crash on
kernels built without SBI PMU support
- fix for systems that clear *envcfg on suspend, which manifests as
cbo.zero trapping after resume
- fixes for Svnapot systems, including removing Svnapot support for
huge vmalloc/vmap regions
* tag 'riscv-for-linus-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Sparse-Memory/vmemmap out-of-bounds fix
riscv: Fix pte_leaf_size() for NAPOT
Revert "riscv: mm: support Svnapot in huge vmap"
riscv: Save/restore envcfg CSR during CPU suspend
riscv: Add a custom ISA extension for the [ms]envcfg CSR
riscv: Fix enabling cbo.zero when running in M-mode
perf: RISCV: Fix panic on pmu overflow handler
MAINTAINERS: Update SiFive driver maintainers
drivers: perf: ctr_get_width function for legacy is not defined
drivers: perf: added capabilities for legacy PMU
RISC-V: Ignore V from the riscv,isa DT property on older T-Head CPUs
riscv: Fix build error if !CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION
riscv: mm: fix NOCACHE_THEAD does not set bit[61] correctly
riscv: add CALLER_ADDRx support
RISC-V: Drop invalid test from CONFIG_AS_HAS_OPTION_ARCH
kbuild: Add -Wa,--fatal-warnings to as-instr invocation
riscv: tlb: fix __p*d_free_tlb()
|
|
Introduce --kallsyms argument for scanning binary files for known symbol
addresses. This would have found the exposure in /sys/kernel/notes:
$ scripts/leaking_addresses.pl --kallsyms=<(sudo cat /proc/kallsyms)
/sys/kernel/notes: hypercall_page @ 156
/sys/kernel/notes: xen_hypercall_set_trap_table @ 156
/sys/kernel/notes: startup_xen @ 132
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Tycho Andersen <tandersen@netflix.com>
Link: https://lore.kernel.org/r/20240222220053.1475824-4-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
These are false positives from the input subsystem:
/proc/bus/input/devices: B: KEY=402000000 3803078f800d001 feffffdfffefffff fffffffffffffffe
/sys/devices/platform/i8042/serio0/input/input1/uevent: KEY=402000000 3803078f800d001 feffffdfffefffff fffffffffffffffe
/sys/devices/platform/i8042/serio0/input/input1/capabilities/key: 402000000 3803078f800d001 feffffdf
Pass in the filename for more context and expand the "ignored pattern"
matcher to notice these.
Reviewed-by: Tycho Andersen <tandersen@netflix.com>
Link: https://lore.kernel.org/r/20240222220053.1475824-3-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Instead of using a statically named path in /tmp, use File::Temp to create
(and remove) the temporary file used for parsing /proc/config.gz.
Reviewed-by: Tycho Andersen <tandersen@netflix.com>
Link: https://lore.kernel.org/r/20240222220053.1475824-2-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
include/linux/overflow.h includes helper macros intended for calculating
sizes of allocations. These macros prevent accidental overflow by
saturating at SIZE_MAX.
In general when calculating such sizes use of the macros is preferred. Add
a semantic patch which can detect code patterns which can be replaced by
struct_size.
Note that I set the confidence to medium because this patch doesn't make an
attempt to ensure that the relevant array is actually a flexible array. The
struct_size macro does specifically require a flexible array. In many cases
the detected code could be refactored to a flexible array, but this is not
always possible (such as if there are multiple over-allocations).
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20230227202428.3657443-1-jacob.e.keller@intel.com
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Add rules for finding places where str_plural() can be used. This
currently finds:
54 files changed, 62 insertions(+), 61 deletions(-)
Co-developed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://lore.kernel.org/all/fc1b25a8-6381-47c2-831c-ab6b8201a82b@intel.com/
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
This is the next upgrade to the Rust toolchain, from 1.75.0 to 1.76.0
(i.e. the latest) [1].
See the upgrade policy [2] and the comments on the first upgrade in
commit 3ed03f4da06e ("rust: upgrade to Rust 1.68.2").
# Unstable features
No unstable features that we use were stabilized in Rust 1.76.0.
The only unstable features allowed to be used outside the `kernel` crate
are still `new_uninit,offset_of`, though other code to be upstreamed
may increase the list.
Please see [3] for details.
# Required changes
`rustc` (and others) now warns when it cannot connect to the Make
jobserver, thus mark those invocations as recursive as needed. Please
see the previous commit for details.
# Other changes
Rust 1.76.0 does not emit the `.debug_pub{names,types}` sections anymore
for DWARFv4 [4][5]. For instance, in the uncompressed debug info case,
this debug information took:
samples/rust/rust_minimal.o ~64 KiB (~18% of total object size)
rust/kernel.o ~92 KiB (~15%)
rust/core.o ~114 KiB ( ~5%)
In the compressed debug info (zlib) case:
samples/rust/rust_minimal.o ~11 KiB (~6%)
rust/kernel.o ~17 KiB (~5%)
rust/core.o ~21 KiB (~1.5%)
In addition, the `rustc_codegen_gcc` backend now does not emit the
`.eh_frame` section when compiling under `-Cpanic=abort` [6], thus
removing the need for the patch in the CI to compile the kernel [7].
Moreover, it also now emits the `.comment` section too [6].
# `alloc` upgrade and reviewing
The vast majority of changes are due to our `alloc` fork being upgraded
at once.
There are two kinds of changes to be aware of: the ones coming from
upstream, which we should follow as closely as possible, and the updates
needed in our added fallible APIs to keep them matching the newer
infallible APIs coming from upstream.
Instead of taking a look at the diff of this patch, an alternative
approach is reviewing a diff of the changes between upstream `alloc` and
the kernel's. This allows to easily inspect the kernel additions only,
especially to check if the fallible methods we already have still match
the infallible ones in the new version coming from upstream.
Another approach is reviewing the changes introduced in the additions in
the kernel fork between the two versions. This is useful to spot
potentially unintended changes to our additions.
To apply these approaches, one may follow steps similar to the following
to generate a pair of patches that show the differences between upstream
Rust and the kernel (for the subset of `alloc` we use) before and after
applying this patch:
# Get the difference with respect to the old version.
git -C rust checkout $(linux/scripts/min-tool-version.sh rustc)
git -C linux ls-tree -r --name-only HEAD -- rust/alloc |
cut -d/ -f3- |
grep -Fv README.md |
xargs -IPATH cp rust/library/alloc/src/PATH linux/rust/alloc/PATH
git -C linux diff --patch-with-stat --summary -R > old.patch
git -C linux restore rust/alloc
# Apply this patch.
git -C linux am rust-upgrade.patch
# Get the difference with respect to the new version.
git -C rust checkout $(linux/scripts/min-tool-version.sh rustc)
git -C linux ls-tree -r --name-only HEAD -- rust/alloc |
cut -d/ -f3- |
grep -Fv README.md |
xargs -IPATH cp rust/library/alloc/src/PATH linux/rust/alloc/PATH
git -C linux diff --patch-with-stat --summary -R > new.patch
git -C linux restore rust/alloc
Now one may check the `new.patch` to take a look at the additions (first
approach) or at the difference between those two patches (second
approach). For the latter, a side-by-side tool is recommended.
Link: https://github.com/rust-lang/rust/blob/stable/RELEASES.md#version-1760-2024-02-08 [1]
Link: https://rust-for-linux.com/rust-version-policy [2]
Link: https://github.com/Rust-for-Linux/linux/issues/2 [3]
Link: https://github.com/rust-lang/compiler-team/issues/688 [4]
Link: https://github.com/rust-lang/rust/pull/117962 [5]
Link: https://github.com/rust-lang/rust/pull/118068 [6]
Link: https://github.com/Rust-for-Linux/ci-rustc_codegen_gcc [7]
Tested-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240217002638.57373-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
`rustc` (like Cargo) may take advantage of the jobserver at any time
(e.g. for backend parallelism, or eventually frontend too). In the kernel,
we call `rustc` with `-Ccodegen-units=1` (and `-Zthreads` is 1 so far),
so we do not expect parallelism. However, in the upcoming Rust 1.76.0, a
warning is emitted by `rustc` [1] when it cannot connect to the jobserver
it was passed (in many cases, but not all: compiling and `--print sysroot`
do, but `--version` does not). And given GNU Make always passes
the jobserver in the environment variable (even when a line is deemed
non-recursive), `rustc` will end up complaining about it (in particular
in Make 4.3 where there is only the simple pipe jobserver style).
One solution is to remove the jobserver from `MAKEFLAGS`. However, we
can mark the lines with calls to `rustc` (and Cargo) as recursive, which
looks simpler. This is being documented as a recommendation in `rustc`
[2] and allows us to be ready for the time we may use parallelism inside
`rustc` (potentially now, if a user passes `-Zthreads`). Thus do so.
Similarly, do the same for `rustdoc` and `cargo` calls.
Finally, there is one case that the solution does not cover, which is the
`$(shell ...)` call we have. Thus, for that one, set an empty `MAKEFLAGS`
environment variable.
Link: https://github.com/rust-lang/rust/issues/120515 [1]
Acked-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://github.com/rust-lang/rust/pull/121564 [2]
Link: https://lore.kernel.org/r/20240217002638.57373-1-ojeda@kernel.org
[ Reworded to add link to PR documenting the recommendation. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Now that all the interrupt warnings have been fixed, enable
'interrupt_provider' check by default. This will also enable
'interrupt_map' check.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240213-arm-dt-cleanups-v1-6-f2dee1292525@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
In kernel-doc comments, unary operator * collides with Sphinx/
docutil's markdown for emphasizing.
This resulted in additional warnings from "make htmldocs":
WARNING: Inline emphasis start-string without end-string.
, as reported recently [1].
Those have been worked around either by escaping * (like \*param) or by
using inline-literal form of ``*param``, both of which are specific
to Sphinx/docutils.
Such workarounds are against the kenrel-doc's ideal and should better
be avoided.
Instead, add "*" to the list of unary operators kernel-doc recognizes
and make the form of *@param available in kernel-doc comments.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: [1] https://lore.kernel.org/r/20240223153636.41358be5@canb.auug.org.au/
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
For the same rationale as commit 54b8ae66ae1a ("kbuild: change
*FLAGS_<basetarget>.o to take the path relative to $(obj)").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
|
|
Commit 54b8ae66ae1a ("kbuild: change *FLAGS_<basetarget>.o to take the
path relative to $(obj)") changed the syntax of per-file compiler flags.
The situation is the same for the following variables:
OBJECT_FILES_NON_STANDARD_<basetarget>.o
GCOV_PROFILE_<basetarget>.o
KASAN_SANITIZE_<basetarget>.o
KMSAN_SANITIZE_<basetarget>.o
KMSAN_ENABLE_CHECKS_<basetarget>.o
UBSAN_SANITIZE_<basetarget>.o
KCOV_INSTRUMENT_<basetarget>.o
KCSAN_SANITIZE_<basetarget>.o
KCSAN_INSTRUMENT_BARRIERS_<basetarget>.o
The <basetarget> is the filename of the target with its directory and
suffix stripped.
This syntax comes into a trouble when two files with the same basename
appear in one Makefile, for example:
obj-y += dir1/foo.o
obj-y += dir2/foo.o
OBJECT_FILES_NON_STANDARD_foo.o := y
OBJECT_FILES_NON_STANDARD_foo.o is applied to both dir1/foo.o and
dir2/foo.o. This syntax is not flexbile enough to handle cases where
one of them is a standard object, but the other is not.
It is more sensible to use the relative path to the Makefile, like this:
obj-y += dir1/foo.o
OBJECT_FILES_NON_STANDARD_dir1/foo.o := y
obj-y += dir2/foo.o
OBJECT_FILES_NON_STANDARD_dir2/foo.o := y
To maintain the current behavior, I made adjustments to the following two
Makefiles:
- arch/x86/entry/vdso/Makefile, which compiles vclock_gettime.o, vgetcpu.o,
and their vdso32 variants.
- arch/x86/kvm/Makefile, which compiles vmx/vmenter.o and svm/vmenter.o
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Acked-by: Sean Christopherson <seanjc@google.com>
|
|
Some sysctl tables are registered for each namespace.
(Like in ipc/ipc_sysctl.c)
These need special handling to track the variable assignments.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Joel Granados <j.granados@samsung.com>
|
|
The script expects the old sysctl_register_paths() API which was removed
some time ago. Adapt it to work with the new
sysctl_register()/sysctl_register_sz()/sysctl_register_init() APIs.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Joel Granados <j.granados@samsung.com>
|
|
Since commit d492cc2573a0 ("driver core: device.h: make struct bus_type a
const *"), the driver core can properly handle constant struct bus_type.
Make sure that new usages of the struct already enter the tree as const.
Link: https://lkml.kernel.org/r/20240204-bus_cleanup-checkpatch-v1-1-8d51dcecda20@marliere.net
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Suggested-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Dwaipayan Ray <dwaipayanray1@gmail.com>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Now that the minimum supported version of LLVM for building the kernel has
been bumped to 13.0.1, the condition for using _mcount as MCOUNT_NAME is
always true, as the build will fail during the configuration stage for
older LLVM versions. Replace MCOUNT_NAME with _mcount directly.
This effectively reverts commit 7ce047715030 ("riscv: Workaround mcount
name prior to clang-13").
Link: https://lkml.kernel.org/r/20240125-bump-min-llvm-ver-to-13-0-1-v1-7-f5ff9bda41c5@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: "Aneesh Kumar K.V (IBM)" <aneesh.kumar@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Conor Dooley <conor@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Bump the minimum supported version of LLVM to 13.0.1".
This series bumps the minimum supported version of LLVM for building the
kernel to 13.0.1. The first patch does the bump and all subsequent
patches clean up all the various workarounds and checks for earlier
versions.
Quoting the first patch's commit message for those that were only on CC
for the clean ups:
When __builtin_mul_overflow() has arguments that differ in terms of
signedness and width, LLVM may generate a libcall to __muloti4 because
it performs the checks in terms of 65-bit multiplication. This issue
becomes harder to hit (but still possible) after LLVM 12.0.0, which
includes a special case for matching widths but different signs.
To gain access to this special case, which the kernel can take advantage
of when calls to __muloti4 appear, bump the minimum supported version of
LLVM for building the kernel to 13.0.1. 13.0.1 was chosen because there
is minimal impact to distribution support while allowing a few more
workarounds to be dropped in the kernel source than if 12.0.0 were
chosen. Looking at container images of up to date distribution versions:
archlinux:latest clang version 16.0.6
debian:oldoldstable-slim clang version 7.0.1-8+deb10u2 (tags/RELEASE_701/final)
debian:oldstable-slim Debian clang version 11.0.1-2
debian:stable-slim Debian clang version 14.0.6
debian:testing-slim Debian clang version 16.0.6 (19)
debian:unstable-slim Debian clang version 16.0.6 (19)
fedora:38 clang version 16.0.6 (Fedora 16.0.6-3.fc38)
fedora:latest clang version 17.0.6 (Fedora 17.0.6-1.fc39)
fedora:rawhide clang version 17.0.6 (Fedora 17.0.6-1.fc40)
opensuse/leap:latest clang version 15.0.7
opensuse/tumbleweed:latest clang version 17.0.6
ubuntu:focal clang version 10.0.0-4ubuntu1
ubuntu:latest Ubuntu clang version 14.0.0-1ubuntu1.1
ubuntu:rolling Ubuntu clang version 16.0.6 (15)
ubuntu:devel Ubuntu clang version 17.0.6 (3)
The only distribution that gets left behind is Debian Bullseye, as the
default version is 11.0.1; other distributions either have a newer
version than 13.0.1 or one older than the current minimum of 11.0.0.
Debian has easy access to more recent LLVM versions through
apt.llvm.org, so this is not as much of a concern. There are also the
kernel.org LLVM toolchains, which should work with distributions with
glibc 2.28 and newer.
Another benefit of slimming up the number of supported versions of LLVM
for building the kernel is reducing the build capacity needed to support
a matrix that builds with each supported version, which allows a matrix
to reallocate the freed up build capacity towards something else, such
as more configuration combinations.
This passes my build matrix with all supported versions.
This is based on Andrew's mm-nonmm-unstable to avoid trivial conflicts
with my series to update the LLVM links across the repository [1] but I
can easily rebase it to linux-kbuild if Masahiro would rather these
patches go through there (and defer the conflict resolution to the merge
window).
[1]: https://lore.kernel.org/20240109-update-llvm-links-v1-0-eb09b59db071@kernel.org/
This patch (of 11):
When __builtin_mul_overflow() has arguments that differ in terms of
signedness and width, LLVM may generate a libcall to __muloti4 because it
performs the checks in terms of 65-bit multiplication. This issue becomes
harder to hit (but still possible) after LLVM 12.0.0, which includes a
special case for matching widths but different signs.
To gain access to this special case, which the kernel can take advantage
of when calls to __muloti4 appear, bump the minimum supported version of
LLVM for building the kernel to 13.0.1. 13.0.1 was chosen because there
is minimal impact to distribution support while allowing a few more
workarounds to be dropped in the kernel source than if 12.0.0 were chosen.
Looking at container images of up to date distribution versions:
archlinux:latest clang version 16.0.6
debian:oldoldstable-slim clang version 7.0.1-8+deb10u2 (tags/RELEASE_701/final)
debian:oldstable-slim Debian clang version 11.0.1-2
debian:stable-slim Debian clang version 14.0.6
debian:testing-slim Debian clang version 16.0.6 (19)
debian:unstable-slim Debian clang version 16.0.6 (19)
fedora:38 clang version 16.0.6 (Fedora 16.0.6-3.fc38)
fedora:latest clang version 17.0.6 (Fedora 17.0.6-1.fc39)
fedora:rawhide clang version 17.0.6 (Fedora 17.0.6-1.fc40)
opensuse/leap:latest clang version 15.0.7
opensuse/tumbleweed:latest clang version 17.0.6
ubuntu:focal clang version 10.0.0-4ubuntu1
ubuntu:latest Ubuntu clang version 14.0.0-1ubuntu1.1
ubuntu:rolling Ubuntu clang version 16.0.6 (15)
ubuntu:devel Ubuntu clang version 17.0.6 (3)
The only distribution that gets left behind is Debian Bullseye, as the
default version is 11.0.1; other distributions either have a newer version
than 13.0.1 or one older than the current minimum of 11.0.0. Debian has
easy access to more recent LLVM versions through apt.llvm.org, so this is
not as much of a concern. There are also the kernel.org LLVM toolchains,
which should work with distributions with glibc 2.28 and newer.
Another benefit of slimming up the number of supported versions of LLVM
for building the kernel is reducing the build capacity needed to support a
matrix that builds with each supported version, which allows a matrix to
reallocate the freed up build capacity towards something else, such as
more configuration combinations.
Link: https://lkml.kernel.org/r/20240125-bump-min-llvm-ver-to-13-0-1-v1-0-f5ff9bda41c5@kernel.org
Closes: https://github.com/ClangBuiltLinux/linux/issues/1975
Link: https://github.com/llvm/llvm-project/issues/38013
Link: https://github.com/llvm/llvm-project/commit/3203143f1356a4e4e3ada231156fc6da6e1a9f9d
Link: https://mirrors.edge.kernel.org/pub/tools/llvm/
Link: https://lkml.kernel.org/r/20240125-bump-min-llvm-ver-to-13-0-1-v1-1-f5ff9bda41c5@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: "Aneesh Kumar K.V (IBM)" <aneesh.kumar@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Conor Dooley <conor@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf and netfilter.
Current release - regressions:
- af_unix: fix another unix GC hangup
Previous releases - regressions:
- core: fix a possible AF_UNIX deadlock
- bpf: fix NULL pointer dereference in sk_psock_verdict_data_ready()
- netfilter: nft_flow_offload: release dst in case direct xmit path
is used
- bridge: switchdev: ensure MDB events are delivered exactly once
- l2tp: pass correct message length to ip6_append_data
- dccp/tcp: unhash sk from ehash for tb2 alloc failure after
check_estalblished()
- tls: fixes for record type handling with PEEK
- devlink: fix possible use-after-free and memory leaks in
devlink_init()
Previous releases - always broken:
- bpf: fix an oops when attempting to read the vsyscall page through
bpf_probe_read_kernel
- sched: act_mirred: use the backlog for mirred ingress
- netfilter: nft_flow_offload: fix dst refcount underflow
- ipv6: sr: fix possible use-after-free and null-ptr-deref
- mptcp: fix several data races
- phonet: take correct lock to peek at the RX queue
Misc:
- handful of fixes and reliability improvements for selftests"
* tag 'net-6.8.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits)
l2tp: pass correct message length to ip6_append_data
net: phy: realtek: Fix rtl8211f_config_init() for RTL8211F(D)(I)-VD-CG PHY
selftests: ioam: refactoring to align with the fix
Fix write to cloned skb in ipv6_hop_ioam()
phonet/pep: fix racy skb_queue_empty() use
phonet: take correct lock to peek at the RX queue
net: sparx5: Add spinlock for frame transmission from CPU
net/sched: flower: Add lock protection when remove filter handle
devlink: fix port dump cmd type
net: stmmac: Fix EST offset for dwmac 5.10
tools: ynl: don't leak mcast_groups on init error
tools: ynl: make sure we always pass yarg to mnl_cb_run
net: mctp: put sock on tag allocation failure
netfilter: nf_tables: use kzalloc for hook allocation
netfilter: nf_tables: register hooks last when adding new chain/flowtable
netfilter: nft_flow_offload: release dst in case direct xmit path is used
netfilter: nft_flow_offload: reset dst in route object after setting up flow
netfilter: nf_tables: set dormant flag on hook register failure
selftests: tls: add test for peeking past a record of a different type
selftests: tls: add test for merging of same-type control messages
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2024-02-22
The following pull-request contains BPF updates for your *net* tree.
We've added 11 non-merge commits during the last 24 day(s) which contain
a total of 15 files changed, 217 insertions(+), 17 deletions(-).
The main changes are:
1) Fix a syzkaller-triggered oops when attempting to read the vsyscall
page through bpf_probe_read_kernel and friends, from Hou Tao.
2) Fix a kernel panic due to uninitialized iter position pointer in
bpf_iter_task, from Yafang Shao.
3) Fix a race between bpf_timer_cancel_and_free and bpf_timer_cancel,
from Martin KaFai Lau.
4) Fix a xsk warning in skb_add_rx_frag() (under CONFIG_DEBUG_NET)
due to incorrect truesize accounting, from Sebastian Andrzej Siewior.
5) Fix a NULL pointer dereference in sk_psock_verdict_data_ready,
from Shigeru Yoshida.
6) Fix a resolve_btfids warning when bpf_cpumask symbol cannot be
resolved, from Hari Bathini.
bpf-for-netdev
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf, sockmap: Fix NULL pointer dereference in sk_psock_verdict_data_ready()
selftests/bpf: Add negtive test cases for task iter
bpf: Fix an issue due to uninitialized bpf_iter_task
selftests/bpf: Test racing between bpf_timer_cancel_and_free and bpf_timer_cancel
bpf: Fix racing between bpf_timer_cancel_and_free and bpf_timer_cancel
selftest/bpf: Test the read of vsyscall page under x86-64
x86/mm: Disallow vsyscall page read for copy_from_kernel_nofault()
x86/mm: Move is_vsyscall_vaddr() into asm/vsyscall.h
bpf, scripts: Correct GPL license name
xsk: Add truesize to skb_add_rx_frag().
bpf: Fix warning for bpf_cpumask in verifier
====================
Link: https://lore.kernel.org/r/20240221231826.1404-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The patch series "Mitigate a vmap lock contention" removes vmap_area_list,
which will break the gdb vmallocinfo command:
(gdb) lx-vmallocinfo
Python Exception <class 'gdb.error'>: No symbol "vmap_area_list" in current context.
Error occurred in Python: No symbol "vmap_area_list" in current context.
So we can instead use vmap_nodes to iterate all vmallocinfo.
Link: https://lkml.kernel.org/r/20240207085856.11190-1-Kuan-Ying.Lee@mediatek.com
Signed-off-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Cc: Casper Li <casper.li@mediatek.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Qun-Wei Lin <qun-wei.lin@mediatek.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In addition to #ifdef, #define and #endif, also handle
any #if since we may be using e.g. #if IS_ENABLED(...).
I didn't find any instances of this in the kernel now,
there are enums with such ifs inside, but I didn't find
any with kernel-doc as well. However, it came up as we
were adding such a construct in our driver and warnings
from kernel-doc were the result.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240214142937.80ee86a3beae.Ibcc5bd97a20cd10a792663e4b254cd46c7e8b520@changeid
|
|
Untangle some of the $is_macro logic and the nested conditionals.
This makes it easier to see where and how the signature is actually
printed.
No functional change.
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240215134828.1277109-5-vegard.nossum@oracle.com
|
|
Format the entire function signature and place it in a separate variable;
this both makes it easier to understand what these lines of code are doing
and will allow us to simplify the code further in the following patch.
No functional change.
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240215134828.1277109-4-vegard.nossum@oracle.com
|
|
Get rid of the $start variable, since it's really not necessary.
No functional change.
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240215134828.1277109-3-vegard.nossum@oracle.com
|
|
Set 'softtabstop' to 4 spaces, which will hopefully help keep the
indentation in this file consistent going forwards.
This mirrors the modeline in scripts such as recordmcount.pl, ktest.pl,
and others.
Emacs seems to use 4 spaces to indent by default, so it doesn't require
anything special here.
No functional change.
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240215134828.1277109-2-vegard.nossum@oracle.com
|
|
In order to mitigate unexpected signed wrap-around[1], bring back the
signed integer overflow sanitizer. It was removed in commit 6aaa31aeb9cf
("ubsan: remove overflow checks") because it was effectively a no-op
when combined with -fno-strict-overflow (which correctly changes signed
overflow from being "undefined" to being explicitly "wrap around").
Compilers are adjusting their sanitizers to trap wrap-around and to
detecting common code patterns that should not be instrumented
(e.g. "var + offset < var"). Prepare for this and explicitly rename
the option from "OVERFLOW" to "WRAP" to more accurately describe the
behavior.
To annotate intentional wrap-around arithmetic, the helpers
wrapping_add/sub/mul_wrap() can be used for individual statements. At
the function level, the __signed_wrap attribute can be used to mark an
entire function as expecting its signed arithmetic to wrap around. For a
single object file the Makefile can use "UBSAN_SIGNED_WRAP_target.o := n"
to mark it as wrapping, and for an entire directory, "UBSAN_SIGNED_WRAP :=
n" can be used.
Additionally keep these disabled under CONFIG_COMPILE_TEST for now.
Link: https://github.com/KSPP/linux/issues/26 [1]
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Hao Luo <haoluo@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
When a checklist is opened, the cursor is rendered in a wrong position
(after the last list element on the screen). You can observe it by
opening any checklist in menuconfig.
Added wmove() to set the cursor in the proper position, just like in
menubox.c. Removed wnoutrefresh(dialog) because dialog window has
already been updated in print_buttons(). Replaced wnoutrefresh(list) and
doupdate() calls with one wrefresh(list) call.
Signed-off-by: Matthew Bystrin <dev.mbstr@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Use helper macros in hashtable.h for generic hashtable implementation.
We can git rid of the hash head index of for_all_symbols().
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
for_all_symbols() iterates in the symbol hash table. The order of
iteration depends on the hash table implementation.
If you use it for printing errors, they are shown in random order.
For example, the order of following test input and the corresponding
error do not match:
- scripts/kconfig/tests/err_recursive_dep/Kconfig
- scripts/kconfig/tests/err_recursive_dep/expected_stderr
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Do not feed back the choice type to choice values.
Each choice value should explicitly specify 'bool' or 'tristate',
as all the Kconfig files already do. If the type were missing,
"config symbol defined without type" would be shown.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Currently, a linked list is used to keep track of all the Kconfig
files that have ever been parsed. Every time the "source" statement
is encountered, the linked list is traversed to check if the file has
been opened before. This prevents the same file from being recorded
in include/config/auto.conf.cmd again.
Given 1500+ Kconfig files parsed, a hashtable is now a more optimal
data structure.
By the way, you may wonder why we check this in the first place.
It matters only when the same file is included multiple times.
In old days, such a use case was forbidden, but commit f094f8a1b273
("kconfig: allow multiple inclusion of the same file") provided a bit
more flexibility. Of course, it is almost hypothetical...
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Remove the 'static' qualifier from strhash() so that it can be accessed
from other files. Move it to util.c, which is a more appropriate location.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Conditional atomic operations (e.g. cmpxchg()) only provide ordering
when the condition holds; when the condition does not hold, the location
is not modified and relaxed ordering is provided. Where ordering is
needed for failed conditional atomics, it is necessary to use
smp_mb__before_atomic() and/or smp_mb__after_atomic().
This is explained tersely in memory-barriers.txt, and is implied but not
explicitly stated in the kerneldoc comments for the conditional
operations. The lack of an explicit statement has lead to some off-list
queries about the ordering semantics of failing conditional operations,
so evidently this is confusing.
Update the kerneldoc comments to explicitly describe the lack of ordering
for failed conditional atomic operations.
For most conditional atomic operations, this is written as:
| If (${condition}), atomically updates @v to (${new}) with ${desc_order} ordering.
| Otherwise, @v is not modified and relaxed ordering is provided.
For the try_cmpxchg() operations, this is written as:
| If (${condition}), atomically updates @v to @new with ${desc_order} ordering.
| Otherwise, @v is not modified, @old is updated to the current value of @v,
| and relaxed ordering is provided.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Link: https://lore.kernel.org/r/20240209124010.2096198-1-mark.rutland@arm.com
|
|
To use ARRAY_SIZE from other files, move it to its own header,
just like include/linux/array_size.h.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
This is similar to include/linux/hashtable.h, but the implementation
has been simplified.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Import more macros and inline functions from include/linux/list.h
and include/linux/types.h.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
