Age | Commit message (Collapse) | Author | Files | Lines |
|
__hashtab_insert() in hashtab.h has a cleaner interface that allows the
caller to specify the chain node location that the new node is being
inserted into so that it can update the node that currently occupies it.
Signed-off-by: Jacob Satterfield <jsatterfield.linux@gmail.com>
Reviewed-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
avtab_read_item() is a hot function called when reading each rule in a
binary policydb. With the current Fedora policy and refpolicy, this
function is called nearly 100,000 times per policy load.
A single avtab node is only permitted to have a single specifier to
describe the data it holds. As such, a check is performed to make sure
only one specifier is set. Previously this was done via a for-loop.
However, there is already an optimal function for finding the number of
bits set (hamming weight) and on some architectures, dedicated
instructions (popcount) which can be executed much more efficiently.
Even when using -mcpu=generic on a x86-64 Fedora 38 VM, this commit
results in a modest 2-4% speedup for policy loading due to a substantial
reduction in the number of instructions executed.
Signed-off-by: Jacob Satterfield <jsatterfield.linux@gmail.com>
Reviewed-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
The number of buckets is calculated by performing a binary AND against
the mask of the hash table, which is one less than its size (which is a
power of two). This leads to all top bits being discarded, e.g. with
the Reference Policy on Debian there exists 376 entries, leading to a
size of 512, discarding the top 23 bits.
Use jhash to improve the hash table utilization:
# current
roletr: 376 entries and 124/512 buckets used,
longest chain length 8, sum of chain length^2 1496
# patch
roletr: 376 entries and 266/512 buckets used,
longest chain length 4, sum of chain length^2 646
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Reviewed-by: Stephen Smalley <stephen.smalley.work@gmail.com>
[PM: line wrap in the commit description]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Instead of dividing by 8 and then performing log2 by hand, use a more
readable calculation.
The behavior of rounddown_pow_of_two() for an input of 0 is undefined,
so handle that case and small values manually to achieve the same
results.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Reviewed-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Print the sum of chain lengths squared as a metric for hash tables to
provide more insights, similar to avtabs.
While on it add a comma in the avtab message to improve readability of
the output.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Reviewed-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct sidtab_str_cache.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Paul Moore <paul@paul-moore.com>
Cc: Stephen Smalley <stephen.smalley.work@gmail.com>
Cc: Eric Paris <eparis@parisplace.org>
Cc: Ondrej Mosnacek <omosnace@redhat.com>
Cc: selinux@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore:
"Thirty three SELinux patches, which is a pretty big number for us, but
there isn't really anything scary in here; in fact we actually manage
to remove 10 lines of code with this :)
- Promote the SELinux DEBUG_HASHES macro to CONFIG_SECURITY_SELINUX_DEBUG
The DEBUG_HASHES macro was a buried SELinux specific preprocessor
debug macro that was a problem waiting to happen. Promoting the
debug macro to a proper Kconfig setting should help both improve
the visibility of the feature as well enable improved test
coverage. We've moved some additional debug functions under the
CONFIG_SECURITY_SELINUX_DEBUG flag and we may see more work in the
future.
- Emit a pr_notice() message if virtual memory is executable by default
As this impacts the SELinux access control policy enforcement, if
the system's configuration is such that virtual memory is
executable by default we print a single line notice to the console.
- Drop avtab_search() in favor of avtab_search_node()
Both functions are nearly identical so we removed avtab_search()
and converted the callers to avtab_search_node().
- Add some SELinux network auditing helpers
The helpers not only reduce a small amount of code duplication, but
they provide an opportunity to improve UDP flood performance
slightly by delaying initialization of the audit data in some
cases.
- Convert GFP_ATOMIC allocators to GFP_KERNEL when reading SELinux policy
There were two SELinux policy load helper functions that were
allocating memory using GFP_ATOMIC, they have been converted to
GFP_KERNEL.
- Quiet a KMSAN warning in selinux_inet_conn_request()
A one-line error path (re)set patch that resolves a KMSAN warning.
It is important to note that this doesn't represent a real bug in
the current code, but it quiets KMSAN and arguably hardens the code
against future changes.
- Cleanup the policy capability accessor functions
This is a follow-up to the patch which reverted SELinux to using a
global selinux_state pointer. This patch cleans up some artifacts
of that change and turns each accessor into a one-line READ_ONCE()
call into the policy capabilities array.
- A number of patches from Christian Göttsche
Christian submitted almost two-thirds of the patches in this pull
request as he worked to harden the SELinux code against type
differences, variable overflows, etc.
- Support for separating early userspace from the kernel in policy,
with a later revert
We did have a patch that added a new userspace initial SID which
would allow SELinux to distinguish between early user processes
created before the initial policy load and the kernel itself.
Unfortunately additional post-merge testing revealed a problematic
interaction with an old SELinux userspace on an old version of
Ubuntu so we've reverted the patch until we can resolve the
compatibility issue.
- Remove some outdated comments dealing with LSM hook registration
When we removed the runtime disable functionality we forgot to
remove some old comments discussing the importance of LSM hook
registration ordering.
- Minor administrative changes
Stephen Smalley updated his email address and "debranded" SELinux
from "NSA SELinux" to simply "SELinux". We've come a long way from
the original NSA submission and I would consider SELinux a true
community project at this point so removing the NSA branding just
makes sense"
* tag 'selinux-pr-20230829' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: (33 commits)
selinux: prevent KMSAN warning in selinux_inet_conn_request()
selinux: use unsigned iterator in nlmsgtab code
selinux: avoid implicit conversions in policydb code
selinux: avoid implicit conversions in selinuxfs code
selinux: make left shifts well defined
selinux: update type for number of class permissions in services code
selinux: avoid implicit conversions in avtab code
selinux: revert SECINITSID_INIT support
selinux: use GFP_KERNEL while reading binary policy
selinux: update comment on selinux_hooks[]
selinux: avoid implicit conversions in services code
selinux: avoid implicit conversions in mls code
selinux: use identical iterator type in hashtab_duplicate()
selinux: move debug functions into debug configuration
selinux: log about VM being executable by default
selinux: fix a 0/NULL mistmatch in ad_net_init_from_iif()
selinux: introduce SECURITY_SELINUX_DEBUG configuration
selinux: introduce and use lsm_ad_net_init*() helpers
selinux: update my email address
selinux: add missing newlines in pr_err() statements
...
|
|
Set the next pointer in filename_trans_read_helper() before attaching
the new node under construction to the list, otherwise garbage would be
dereferenced on subsequent failure during cleanup in the out goto label.
Cc: <stable@vger.kernel.org>
Fixes: 430059024389 ("selinux: implement new format of filename transitions")
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Use the identical type for local variables, e.g. loop counters.
Declare members of struct policydb_compat_info unsigned to consistently
use unsigned iterators. They hold read-only non-negative numbers in the
global variable policydb_compat.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
The loops upper bound represent the number of permissions used (for the
current class or in general). The limit for this is 32, thus we might
left shift of one less, 31. Shifting a base of 1 results in undefined
behavior; use (u32)1 as base.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Security classes have only up to 32 permissions, hence using an u16 is
sufficient (while improving padding in struct selinux_mapping).
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Return u32 from avtab_hash() instead of int, since the hashing is done
on u32 and the result is used as an index on the hash array.
Use the type of the limit in for loops.
Avoid signed to unsigned conversion of multiplication result in
avtab_hash_eval() and perform multiplication in destination type.
Use unsigned loop iterator for index operations, to avoid sign
extension.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
This commit reverts 5b0eea835d4e ("selinux: introduce an initial SID
for early boot processes") as it was found to cause problems on
distros with old SELinux userspace tools/libraries, specifically
Ubuntu 16.04.
Hopefully we will be able to re-add this functionality at a later
date, but let's revert this for now to help ensure a stable and
backwards compatible SELinux tree.
Link: https://lore.kernel.org/selinux/87edkseqf8.fsf@mail.lhotse
Acked-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Use GFP_KERNEL instead of GFP_ATOMIC while reading a binary policy in
sens_read() and cat_read(), similar to surrounding code.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Use u32 as the output parameter type in security_get_classes() and
security_get_permissions(), based on the type of the symtab nprim
member.
Declare the read-only class string parameter of
security_get_permissions() const.
Avoid several implicit conversions by using the identical type for the
destination.
Use the type identical to the source for local variables.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
[PM: cleanup extra whitespace in subject]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Use u32 for ebitmap bits and sensitivity levels, char for the default
range of a class.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
[PM: description tweaks]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Use the identical type u32 for the loop iterator.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
[PM: remove extra whitespace in subject]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
avtab_hash_eval() and hashtab_stat() are only used in policydb.c when
the configuration SECURITY_SELINUX_DEBUG is enabled.
Move the function definitions under that configuration as well and
provide empty definitions in case SECURITY_SELINUX_DEBUG is disabled, to
avoid using #ifdef in the callers.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
The policy database code contains several debug output statements
related to hashtable utilization. Those are guarded by the macro
DEBUG_HASHES, which is neither documented nor set anywhere.
Introduce a new Kconfig configuration guarding this and potential
other future debugging related code. Disable the setting by default.
Suggested-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
[PM: fixed line lengths in the help text]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Update my email address; MAINTAINERS was updated some time ago.
Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
The kernel print statements do not append an implicit newline to format
strings.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
[PM: subject line tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
avtab_search() shares the same logic with avtab_search_node(), except
that it returns, if found, a pointer to the struct avtab_node member
datum instead of the node itself. Since the member is an embedded
struct, and not a pointer, the returned value of avtab_search() and
avtab_search_node() will always in unison either be NULL or non-NULL.
Drop avtab_search() and replace its calls by avtab_search_node() to
deduplicate logic and adopt the only caller caring for the type of
the returned value accordingly.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
hashtab_init() takes an u32 as size parameter type.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
[PM: subject line tweaks]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
The specifier for avtab keys is always supplied with a type of u16,
either as a macro to security_compute_sid() or the member specified of
the struct avtab_key.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Prevent inserting more than the supported U32_MAX number of entries.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
The function is always inlined and most of the time both relevant
arguments are compile time constants, allowing compilers to elide the
check. Also the function is part of outputting the policy, which is not
performance critical.
Also convert the type of the third parameter into a size_t, since it
should always be a non-negative number of elements.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Currently, SELinux doesn't allow distinguishing between kernel threads
and userspace processes that are started before the policy is first
loaded - both get the label corresponding to the kernel SID. The only
way a process that persists from early boot can get a meaningful label
is by doing a voluntary dyntransition or re-executing itself.
Reusing the kernel label for userspace processes is problematic for
several reasons:
1. The kernel is considered to be a privileged domain and generally
needs to have a wide range of permissions allowed to work correctly,
which prevents the policy writer from effectively hardening against
early boot processes that might remain running unintentionally after
the policy is loaded (they represent a potential extra attack surface
that should be mitigated).
2. Despite the kernel being treated as a privileged domain, the policy
writer may want to impose certain special limitations on kernel
threads that may conflict with the requirements of intentional early
boot processes. For example, it is a good hardening practice to limit
what executables the kernel can execute as usermode helpers and to
confine the resulting usermode helper processes. However, a
(legitimate) process surviving from early boot may need to execute a
different set of executables.
3. As currently implemented, overlayfs remembers the security context of
the process that created an overlayfs mount and uses it to bound
subsequent operations on files using this context. If an overlayfs
mount is created before the SELinux policy is loaded, these "mounter"
checks are made against the kernel context, which may clash with
restrictions on the kernel domain (see 2.).
To resolve this, introduce a new initial SID (reusing the slot of the
former "init" initial SID) that will be assigned to any userspace
process started before the policy is first loaded. This is easy to do,
as we can simply label any process that goes through the
bprm_creds_for_exec LSM hook with the new init-SID instead of
propagating the kernel SID from the parent.
To provide backwards compatibility for existing policies that are
unaware of this new semantic of the "init" initial SID, introduce a new
policy capability "userspace_initial_context" and set the "init" SID to
the same context as the "kernel" SID unless this capability is set by
the policy.
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Avoid using the identifier `bool` to improve support with future C
standards. C23 is about to make `bool` a predefined macro (see N2654).
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
The object context type `fs`, not to be confused with the well used
object context type `fscon`, was introduced in the initial git commit
1da177e4c3f4 ("Linux-2.6.12-rc2") but never actually used since.
The paper "A Security Policy Configuration for the Security-Enhanced
Linux" [1] mentions it under `7.2 File System Contexts` but also states:
Currently, this configuration is unused.
The policy statement defining such object contexts is `fscon`, e.g.:
fscon 2 3 gen_context(system_u:object_r:conA_t,s0) \
gen_context(system_u:object_r:conB_t,s0)
It is not documented at selinuxproject.org or in the SELinux notebook
and not supported by the Reference Policy buildsystem - the statement is
not properly sorted - and thus not used in the Reference or Fedora
Policy.
Print a warning message at policy load for each such object context:
SELinux: void and deprecated fs ocon 02:03
This topic was initially highlighted by Nicolas Iooss [2].
[1]: https://media.defense.gov/2021/Jul/29/2002815735/-1/-1/0/SELINUX-SECURITY-POLICY-CONFIGURATION-REPORT.PDF
[2]: https://lore.kernel.org/selinux/CAJfZ7=mP2eJaq2BfO3y0VnwUJaY2cS2p=HZMN71z1pKjzaT0Eg@mail.gmail.com/
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
[PM: tweaked deprecation comment, description line wrapping]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Commit 53f3517ae087 ("selinux: do not leave dangling pointer behind")
reset the `str` field of the `context` struct in an OOM error branch.
In this struct the fields `str` and `len` are coupled and should be kept
in sync. Set the length to zero according to the string be set to NULL.
Fixes: 53f3517ae087 ("selinux: do not leave dangling pointer behind")
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
A few small tweaks to selinux_audit_rule_init():
- Adjust how we use the @rc variable so we are not doing any extra
work in the common/success case.
- Related to the above, rework the 'out' jump label so that the
success and error paths are different, simplifying both.
- Cleanup some of the vertical whitespace while we are making the
other changes.
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
The array of mount tokens in only used in match_opt_prefix() and never
modified.
The array of symtab names is never modified and only used in the
DEBUG_HASHES configuration as output.
The array of files for the SElinux filesystem sub-directory `ss` is
similar to the other `struct tree_descr` usages only read from to
construct the containing entries.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
The second parameter `tag` of avtab_hash_eval() is only used for
printing. In policydb_index() it is called with a string literal:
avtab_hash_eval(&p->te_avtab, "rules");
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
[PM: slight formatting tweak in description]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Found by codespell(1)
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
In case mls_context_cpy() fails due to OOM set the free'd pointer in
context_cpy() to NULL to avoid it potentially being dereferenced or
free'd again in future. Freeing a NULL pointer is well-defined and a
hard NULL dereference crash is at least not exploitable and should give
a workable stack trace.
Fixes: 12b29f34558b ("selinux: support deferred mapping of contexts")
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Linus observed that the pervasive passing of selinux_state pointers
introduced by me in commit aa8e712cee93 ("selinux: wrap global selinux
state") adds overhead and complexity without providing any
benefit. The original idea was to pave the way for SELinux namespaces
but those have not yet been implemented and there isn't currently
a concrete plan to do so. Remove the passing of the selinux_state
pointers, reverting to direct use of the single global selinux_state,
and likewise remove passing of child pointers like the selinux_avc.
The selinux_policy pointer remains as it is needed for atomic switching
of policies.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202303101057.mZ3Gv5fK-lkp@intel.com/
Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore:
"Two SELinux patches: one increases the sleep time on deprecated
functionality, and one removes the indirect calls in the sidtab
context conversion code"
* tag 'selinux-pr-20221212' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: remove the sidtab context conversion indirect calls
selinux: increase the deprecation sleep for checkreqprot and runtime disable
|
|
The sidtab conversion code has support for multiple context
conversion routines through the use of function pointers and
indirect calls. However, the reality is that all current users rely
on the same conversion routine: convert_context(). This patch does
away with this extra complexity and replaces the indirect calls
with direct function calls; allowing us to remove a layer of
obfuscation and create cleaner, more maintainable code.
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
The following warning was triggered on a hardware environment:
SELinux: Converting 162 SID table entries...
BUG: sleeping function called from invalid context at
__might_sleep+0x60/0x74 0x0
in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 5943, name: tar
CPU: 7 PID: 5943 Comm: tar Tainted: P O 5.10.0 #1
Call trace:
dump_backtrace+0x0/0x1c8
show_stack+0x18/0x28
dump_stack+0xe8/0x15c
___might_sleep+0x168/0x17c
__might_sleep+0x60/0x74
__kmalloc_track_caller+0xa0/0x7dc
kstrdup+0x54/0xac
convert_context+0x48/0x2e4
sidtab_context_to_sid+0x1c4/0x36c
security_context_to_sid_core+0x168/0x238
security_context_to_sid_default+0x14/0x24
inode_doinit_use_xattr+0x164/0x1e4
inode_doinit_with_dentry+0x1c0/0x488
selinux_d_instantiate+0x20/0x34
security_d_instantiate+0x70/0xbc
d_splice_alias+0x4c/0x3c0
ext4_lookup+0x1d8/0x200 [ext4]
__lookup_slow+0x12c/0x1e4
walk_component+0x100/0x200
path_lookupat+0x88/0x118
filename_lookup+0x98/0x130
user_path_at_empty+0x48/0x60
vfs_statx+0x84/0x140
vfs_fstatat+0x20/0x30
__se_sys_newfstatat+0x30/0x74
__arm64_sys_newfstatat+0x1c/0x2c
el0_svc_common.constprop.0+0x100/0x184
do_el0_svc+0x1c/0x2c
el0_svc+0x20/0x34
el0_sync_handler+0x80/0x17c
el0_sync+0x13c/0x140
SELinux: Context system_u:object_r:pssp_rsyslog_log_t:s0:c0 is
not valid (left unmapped).
It was found that within a critical section of spin_lock_irqsave in
sidtab_context_to_sid(), convert_context() (hooked by
sidtab_convert_params.func) might cause the process to sleep via
allocating memory with GFP_KERNEL, which is problematic.
As Ondrej pointed out [1], convert_context()/sidtab_convert_params.func
has another caller sidtab_convert_tree(), which is okay with GFP_KERNEL.
Therefore, fix this problem by adding a gfp_t argument for
convert_context()/sidtab_convert_params.func and pass GFP_KERNEL/_ATOMIC
properly in individual callers.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20221018120111.1474581-1-gongruiqi1@huawei.com/ [1]
Reported-by: Tan Ninghao <tanninghao1@huawei.com>
Fixes: ee1a84fdfeed ("selinux: overhaul sidtab to fix bug and improve performance")
Signed-off-by: GONG, Ruiqi <gongruiqi1@huawei.com>
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
[PM: wrap long BUG() output lines, tweak subject line]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Declare ebitmap, mls_level and mls_context parameters const where they
are only read from. This allows callers to supply pointers to const
as arguments and increases readability.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Just like next_entry(), boundary check is necessary to prevent memory
out-of-bound access.
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
In this function, it directly returns the result of __security_read_policy
without freeing the allocated memory in *data, cause memory leak issue,
so free the memory if __security_read_policy failed.
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
[PM: subject line tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore:
"We've got twelve patches queued for v5.19, with most being fairly
minor. The highlights are below:
- The checkreqprot and runtime disable knobs have been deprecated for
some time with no active users that we can find. In an effort to
move things along we are adding a pause when the knobs are used to
help make the deprecation more noticeable in case anyone is still
using these hacks in the shadows.
- We've added the anonymous inode class name to the AVC audit records
when anonymous inodes are involved. This should make writing policy
easier when anonymous inodes are involved.
- More constification work. This is fairly straightforward and the
source of most of the diffstat.
- The usual minor cleanups: remove unnecessary assignments, assorted
style/checkpatch fixes, kdoc fixes, macro while-loop
encapsulations, #include tweaks, etc"
* tag 'selinux-pr-20220523' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
security: declare member holding string literal const
selinux: log anon inode class name
selinux: declare data arrays const
selinux: fix indentation level of mls_ops block
selinux: include necessary headers in headers
selinux: avoid extra semicolon
selinux: update parameter documentation
selinux: resolve checkpatch errors
selinux: don't sleep when CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE is true
selinux: checkreqprot is deprecated, add some ssleep() discomfort
selinux: runtime disable is deprecated, add some ssleep() discomfort
selinux: Remove redundant assignments
|
|
The code attempts to free the 'new' pointer using kmem_cache_free(),
which is wrong because this function isn't responsible of freeing it.
Instead, the function should free new->htable and clear the contents of
*new (to prevent double-free).
Cc: stable@vger.kernel.org
Fixes: c7c556f1e81b ("selinux: refactor changing booleans")
Reported-by: Wander Lairson Costa <wander@redhat.com>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
The arrays for the policy capability names, the initial sid identifiers
and the class and permission names are not changed at runtime. Declare
them const to avoid accidental modification.
Do not override the classmap and the initial sid list in the build time
script genheaders.
Check flose(3) is successful in genheaders.c, otherwise the written data
might be corrupted or incomplete.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
[PM: manual merge due to fuzz, minor style tweaks]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Add one level of indentation to the code block of the label mls_ops in
constraint_expr_eval(), to adjust the trailing break; to the parent
case: branch.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Wrap macro into `do { } while (0)` to avoid Clang emitting warnings
about extra semicolons.
Similar to userspace commit
https://github.com/SELinuxProject/selinux/commit/9d85aa60d12e468e7fd510c2b5475b5299b71622
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
[PM: whitespace/indenting tweaks]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Reported by checkpatch:
security/selinux/nlmsgtab.c
---------------------------
ERROR: that open brace { should be on the previous line
#29: FILE: security/selinux/nlmsgtab.c:29:
+static const struct nlmsg_perm nlmsg_route_perms[] =
+{
ERROR: that open brace { should be on the previous line
#97: FILE: security/selinux/nlmsgtab.c:97:
+static const struct nlmsg_perm nlmsg_tcpdiag_perms[] =
+{
ERROR: that open brace { should be on the previous line
#105: FILE: security/selinux/nlmsgtab.c:105:
+static const struct nlmsg_perm nlmsg_xfrm_perms[] =
+{
ERROR: that open brace { should be on the previous line
#134: FILE: security/selinux/nlmsgtab.c:134:
+static const struct nlmsg_perm nlmsg_audit_perms[] =
+{
security/selinux/ss/policydb.c
------------------------------
ERROR: that open brace { should be on the previous line
#318: FILE: security/selinux/ss/policydb.c:318:
+static int (*destroy_f[SYM_NUM]) (void *key, void *datum, void *datap) =
+{
ERROR: that open brace { should be on the previous line
#674: FILE: security/selinux/ss/policydb.c:674:
+static int (*index_f[SYM_NUM]) (void *key, void *datum, void *datap) =
+{
ERROR: that open brace { should be on the previous line
#1643: FILE: security/selinux/ss/policydb.c:1643:
+static int (*read_f[SYM_NUM]) (struct policydb *p, struct symtab *s, void *fp) =
+{
ERROR: that open brace { should be on the previous line
#3246: FILE: security/selinux/ss/policydb.c:3246:
+ void *datap) =
+{
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Get rid of redundant assignments which end up in values not being
read either because they are overwritten or the function ends.
Reported by clang-tidy [deadcode.DeadStores]
Signed-off-by: Michal Orzel <michalorzel.eng@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore:
"We've got a number of SELinux patches queued up, the highlights are:
- Fixup the security_fs_context_parse_param() LSM hook so it executes
all of the LSM hook implementations unless a serious error occurs.
We also correct the SELinux hook implementation so that it returns
zero on success.
- In addition to a few SELinux mount option parsing fixes, we
simplified the parsing by moving it earlier in the process.
The logic was that it was unlikely an admin/user would use the new
mount API and not have the policy loaded before passing the SELinux
options.
- Properly fixed the LSM/SELinux/SCTP hooks with the addition of the
security_sctp_assoc_established() hook.
This work was done in conjunction with the netdev folks and should
complete the move of the SCTP labeling from the endpoints to the
associations.
- Fixed a variety of sparse warnings caused by changes in the "__rcu"
markings of some core kernel structures.
- Ensure we access the superblock's LSM security blob using the
stacking-safe accessors.
- Added the ability for the kernel to always allow FIOCLEX and
FIONCLEX if the "ioctl_skip_cloexec" policy capability is
specified.
- Various constifications improvements, type casting improvements,
additional return value checks, and dead code/parameter removal.
- Documentation fixes"
* tag 'selinux-pr-20220321' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: (23 commits)
selinux: shorten the policy capability enum names
docs: fix 'make htmldocs' warning in SCTP.rst
selinux: allow FIOCLEX and FIONCLEX with policy capability
selinux: use correct type for context length
selinux: drop return statement at end of void functions
security: implement sctp_assoc_established hook in selinux
security: add sctp_assoc_established hook
selinux: parse contexts for mount options early
selinux: various sparse fixes
selinux: try to use preparsed sid before calling parse_sid()
selinux: Fix selinux_sb_mnt_opts_compat()
LSM: general protection fault in legacy_parse_param
selinux: fix a type cast problem in cred_init_security()
selinux: drop unused macro
selinux: simplify cred_init_security
selinux: do not discard const qualifier in cast
selinux: drop unused parameter of avtab_insert_node
selinux: drop cast to same type
selinux: enclose macro arguments in parenthesis
selinux: declare name parameter of hash_eval const
...
|