| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This code is rarely (never?) enabled by distros, and it hasn't caught
anything in decades. Let's kill off this legacy debug code.
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull LSM updates from Paul Moore:
- Add new credential functions, get_cred_many() and put_cred_many() to
save some atomic_t operations for a few operations.
While not strictly LSM related, this patchset had been rotting on the
mailing lists for some time and since the LSMs do care a lot about
credentials I thought it reasonable to give this patch a home.
- Five patches to constify different LSM hook parameters.
- Fix a spelling mistake.
* tag 'lsm-pr-20231030' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
lsm: fix a spelling mistake
cred: add get_cred_many and put_cred_many
lsm: constify 'sb' parameter in security_sb_kern_mount()
lsm: constify 'bprm' parameter in security_bprm_committed_creds()
lsm: constify 'bprm' parameter in security_bprm_committing_creds()
lsm: constify 'file' parameter in security_bprm_creds_from_file()
lsm: constify 'sb' parameter in security_quotactl()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore:
- improve the SELinux debugging configuration controls in Kconfig
- print additional information about the hash table chain lengths when
when printing SELinux debugging information
- simplify the SELinux access vector hash table calcaulations
- use a better hashing function for the SELinux role tansition hash
table
- improve SELinux load policy time through the use of optimized
functions for calculating the number of bits set in a field
- addition of a __counted_by annotation
- simplify the avtab_inert_node() function through a simplified
prototype
* tag 'selinux-pr-20231030' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: simplify avtab_insert_node() prototype
selinux: hweight optimization in avtab_read_item
selinux: improve role transition hashing
selinux: simplify avtab slot calculation
selinux: improve debug configuration
selinux: print sum of chain lengths^2 for hash tables
selinux: Annotate struct sidtab_str_cache with __counted_by
|
|
Convert to using the new inode timestamp accessor functions.
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20231004185347.80880-83-jlayton@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
__hashtab_insert() in hashtab.h has a cleaner interface that allows the
caller to specify the chain node location that the new node is being
inserted into so that it can update the node that currently occupies it.
Signed-off-by: Jacob Satterfield <jsatterfield.linux@gmail.com>
Reviewed-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
The "sb_kern_mount" hook has implementation registered in SELinux.
Looking at the function implementation we observe that the "sb"
parameter is not changing.
Mark the "sb" parameter of LSM hook security_sb_kern_mount() as "const"
since it will not be changing in the LSM hook.
Signed-off-by: Khadija Kamran <kamrankhadijadj@gmail.com>
[PM: minor merge fuzzing due to other constification patches]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Three LSMs register the implementations for the 'bprm_committed_creds()'
hook: AppArmor, SELinux and tomoyo. Looking at the function
implementations we may observe that the 'bprm' parameter is not changing.
Mark the 'bprm' parameter of LSM hook security_bprm_committed_creds() as
'const' since it will not be changing in the LSM hook.
Signed-off-by: Khadija Kamran <kamrankhadijadj@gmail.com>
[PM: minor merge fuzzing due to other constification patches]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
The 'bprm_committing_creds' hook has implementations registered in
SELinux and Apparmor. Looking at the function implementations we observe
that the 'bprm' parameter is not changing.
Mark the 'bprm' parameter of LSM hook security_bprm_committing_creds()
as 'const' since it will not be changing in the LSM hook.
Signed-off-by: Khadija Kamran <kamrankhadijadj@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
SELinux registers the implementation for the "quotactl" hook. Looking at
the function implementation we observe that the parameter "sb" is not
changing.
Mark the "sb" parameter of LSM hook security_quotactl() as "const" since
it will not be changing in the LSM hook.
Signed-off-by: Khadija Kamran <kamrankhadijadj@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
avtab_read_item() is a hot function called when reading each rule in a
binary policydb. With the current Fedora policy and refpolicy, this
function is called nearly 100,000 times per policy load.
A single avtab node is only permitted to have a single specifier to
describe the data it holds. As such, a check is performed to make sure
only one specifier is set. Previously this was done via a for-loop.
However, there is already an optimal function for finding the number of
bits set (hamming weight) and on some architectures, dedicated
instructions (popcount) which can be executed much more efficiently.
Even when using -mcpu=generic on a x86-64 Fedora 38 VM, this commit
results in a modest 2-4% speedup for policy loading due to a substantial
reduction in the number of instructions executed.
Signed-off-by: Jacob Satterfield <jsatterfield.linux@gmail.com>
Reviewed-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
The number of buckets is calculated by performing a binary AND against
the mask of the hash table, which is one less than its size (which is a
power of two). This leads to all top bits being discarded, e.g. with
the Reference Policy on Debian there exists 376 entries, leading to a
size of 512, discarding the top 23 bits.
Use jhash to improve the hash table utilization:
# current
roletr: 376 entries and 124/512 buckets used,
longest chain length 8, sum of chain length^2 1496
# patch
roletr: 376 entries and 266/512 buckets used,
longest chain length 4, sum of chain length^2 646
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Reviewed-by: Stephen Smalley <stephen.smalley.work@gmail.com>
[PM: line wrap in the commit description]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Instead of dividing by 8 and then performing log2 by hand, use a more
readable calculation.
The behavior of rounddown_pow_of_two() for an input of 0 is undefined,
so handle that case and small values manually to achieve the same
results.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Reviewed-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
If the SELinux debug configuration is enabled define the macro DEBUG
such that pr_debug() calls are always enabled, regardless of
CONFIG_DYNAMIC_DEBUG, since those message are the main reason for this
configuration in the first place.
Mention example usage in case CONFIG_DYNAMIC_DEBUG is enabled in the
help section of the configuration.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Reviewed-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Print the sum of chain lengths squared as a metric for hash tables to
provide more insights, similar to avtabs.
While on it add a comma in the avtab message to improve readability of
the output.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Reviewed-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
selinux_set_mnt_opts() relies on the fact that the mount options pointer
is always NULL when all options are unset (specifically in its
!selinux_initialized() branch. However, the new
selinux_fs_context_submount() hook breaks this rule by allocating a new
structure even if no options are set. That causes any submount created
before a SELinux policy is loaded to be rejected in
selinux_set_mnt_opts().
Fix this by making selinux_fs_context_submount() leave fc->security
set to NULL when there are no options to be copied from the reference
superblock.
Cc: <stable@vger.kernel.org>
Reported-by: Adam Williamson <awilliam@redhat.com>
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2236345
Fixes: d80a8f1b58c2 ("vfs, security: Fix automount superblock LSM init problem, preventing NFS sb sharing")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct sidtab_str_cache.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Paul Moore <paul@paul-moore.com>
Cc: Stephen Smalley <stephen.smalley.work@gmail.com>
Cc: Eric Paris <eparis@parisplace.org>
Cc: Ondrej Mosnacek <omosnace@redhat.com>
Cc: selinux@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull LSM updates from Paul Moore:
- Add proper multi-LSM support for xattrs in the
security_inode_init_security() hook
Historically the LSM layer has only allowed a single LSM to add an
xattr to an inode, with IMA/EVM measuring that and adding its own as
well. As we work towards promoting IMA/EVM to a "proper LSM" instead
of the special case that it is now, we need to better support the
case of multiple LSMs each adding xattrs to an inode and after
several attempts we now appear to have something that is working
well. It is worth noting that in the process of making this change we
uncovered a problem with Smack's SMACK64TRANSMUTE xattr which is also
fixed in this pull request.
- Additional LSM hook constification
Two patches to constify parameters to security_capget() and
security_binder_transfer_file(). While I generally don't make a
special note of who submitted these patches, these were the work of
an Outreachy intern, Khadija Kamran, and that makes me happy;
hopefully it does the same for all of you reading this.
- LSM hook comment header fixes
One patch to add a missing hook comment header, one to fix a minor
typo.
- Remove an old, unused credential function declaration
It wasn't clear to me who should pick this up, but it was trivial,
obviously correct, and arguably the LSM layer has a vested interest
in credentials so I merged it. Sadly I'm now noticing that despite my
subject line cleanup I didn't cleanup the "unsued" misspelling, sigh
* tag 'lsm-pr-20230829' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
lsm: constify the 'file' parameter in security_binder_transfer_file()
lsm: constify the 'target' parameter in security_capget()
lsm: add comment block for security_sk_classify_flow LSM hook
security: Fix ret values doc for security_inode_init_security()
cred: remove unsued extern declaration change_create_files_as()
evm: Support multiple LSMs providing an xattr
evm: Align evm_inode_init_security() definition with LSM infrastructure
smack: Set the SMACK64TRANSMUTE xattr in smack_inode_init_security()
security: Allow all LSMs to provide xattrs for inode_init_security hook
lsm: fix typo in security_file_lock() comment header
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore:
"Thirty three SELinux patches, which is a pretty big number for us, but
there isn't really anything scary in here; in fact we actually manage
to remove 10 lines of code with this :)
- Promote the SELinux DEBUG_HASHES macro to CONFIG_SECURITY_SELINUX_DEBUG
The DEBUG_HASHES macro was a buried SELinux specific preprocessor
debug macro that was a problem waiting to happen. Promoting the
debug macro to a proper Kconfig setting should help both improve
the visibility of the feature as well enable improved test
coverage. We've moved some additional debug functions under the
CONFIG_SECURITY_SELINUX_DEBUG flag and we may see more work in the
future.
- Emit a pr_notice() message if virtual memory is executable by default
As this impacts the SELinux access control policy enforcement, if
the system's configuration is such that virtual memory is
executable by default we print a single line notice to the console.
- Drop avtab_search() in favor of avtab_search_node()
Both functions are nearly identical so we removed avtab_search()
and converted the callers to avtab_search_node().
- Add some SELinux network auditing helpers
The helpers not only reduce a small amount of code duplication, but
they provide an opportunity to improve UDP flood performance
slightly by delaying initialization of the audit data in some
cases.
- Convert GFP_ATOMIC allocators to GFP_KERNEL when reading SELinux policy
There were two SELinux policy load helper functions that were
allocating memory using GFP_ATOMIC, they have been converted to
GFP_KERNEL.
- Quiet a KMSAN warning in selinux_inet_conn_request()
A one-line error path (re)set patch that resolves a KMSAN warning.
It is important to note that this doesn't represent a real bug in
the current code, but it quiets KMSAN and arguably hardens the code
against future changes.
- Cleanup the policy capability accessor functions
This is a follow-up to the patch which reverted SELinux to using a
global selinux_state pointer. This patch cleans up some artifacts
of that change and turns each accessor into a one-line READ_ONCE()
call into the policy capabilities array.
- A number of patches from Christian Göttsche
Christian submitted almost two-thirds of the patches in this pull
request as he worked to harden the SELinux code against type
differences, variable overflows, etc.
- Support for separating early userspace from the kernel in policy,
with a later revert
We did have a patch that added a new userspace initial SID which
would allow SELinux to distinguish between early user processes
created before the initial policy load and the kernel itself.
Unfortunately additional post-merge testing revealed a problematic
interaction with an old SELinux userspace on an old version of
Ubuntu so we've reverted the patch until we can resolve the
compatibility issue.
- Remove some outdated comments dealing with LSM hook registration
When we removed the runtime disable functionality we forgot to
remove some old comments discussing the importance of LSM hook
registration ordering.
- Minor administrative changes
Stephen Smalley updated his email address and "debranded" SELinux
from "NSA SELinux" to simply "SELinux". We've come a long way from
the original NSA submission and I would consider SELinux a true
community project at this point so removing the NSA branding just
makes sense"
* tag 'selinux-pr-20230829' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: (33 commits)
selinux: prevent KMSAN warning in selinux_inet_conn_request()
selinux: use unsigned iterator in nlmsgtab code
selinux: avoid implicit conversions in policydb code
selinux: avoid implicit conversions in selinuxfs code
selinux: make left shifts well defined
selinux: update type for number of class permissions in services code
selinux: avoid implicit conversions in avtab code
selinux: revert SECINITSID_INIT support
selinux: use GFP_KERNEL while reading binary policy
selinux: update comment on selinux_hooks[]
selinux: avoid implicit conversions in services code
selinux: avoid implicit conversions in mls code
selinux: use identical iterator type in hashtab_duplicate()
selinux: move debug functions into debug configuration
selinux: log about VM being executable by default
selinux: fix a 0/NULL mistmatch in ad_net_init_from_iif()
selinux: introduce SECURITY_SELINUX_DEBUG configuration
selinux: introduce and use lsm_ad_net_init*() helpers
selinux: update my email address
selinux: add missing newlines in pr_err() statements
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Some swap cleanups from Ma Wupeng ("fix WARN_ON in
add_to_avail_list")
- Peter Xu has a series (mm/gup: Unify hugetlb, speed up thp") which
reduces the special-case code for handling hugetlb pages in GUP. It
also speeds up GUP handling of transparent hugepages.
- Peng Zhang provides some maple tree speedups ("Optimize the fast path
of mas_store()").
- Sergey Senozhatsky has improved te performance of zsmalloc during
compaction (zsmalloc: small compaction improvements").
- Domenico Cerasuolo has developed additional selftest code for zswap
("selftests: cgroup: add zswap test program").
- xu xin has doe some work on KSM's handling of zero pages. These
changes are mainly to enable the user to better understand the
effectiveness of KSM's treatment of zero pages ("ksm: support
tracking KSM-placed zero-pages").
- Jeff Xu has fixes the behaviour of memfd's
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED sysctl ("mm/memfd: fix sysctl
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED").
- David Howells has fixed an fscache optimization ("mm, netfs, fscache:
Stop read optimisation when folio removed from pagecache").
- Axel Rasmussen has given userfaultfd the ability to simulate memory
poisoning ("add UFFDIO_POISON to simulate memory poisoning with
UFFD").
- Miaohe Lin has contributed some routine maintenance work on the
memory-failure code ("mm: memory-failure: remove unneeded PageHuge()
check").
- Peng Zhang has contributed some maintenance work on the maple tree
code ("Improve the validation for maple tree and some cleanup").
- Hugh Dickins has optimized the collapsing of shmem or file pages into
THPs ("mm: free retracted page table by RCU").
- Jiaqi Yan has a patch series which permits us to use the healthy
subpages within a hardware poisoned huge page for general purposes
("Improve hugetlbfs read on HWPOISON hugepages").
- Kemeng Shi has done some maintenance work on the pagetable-check code
("Remove unused parameters in page_table_check").
- More folioification work from Matthew Wilcox ("More filesystem folio
conversions for 6.6"), ("Followup folio conversions for zswap"). And
from ZhangPeng ("Convert several functions in page_io.c to use a
folio").
- page_ext cleanups from Kemeng Shi ("minor cleanups for page_ext").
- Baoquan He has converted some architectures to use the
GENERIC_IOREMAP ioremap()/iounmap() code ("mm: ioremap: Convert
architectures to take GENERIC_IOREMAP way").
- Anshuman Khandual has optimized arm64 tlb shootdown ("arm64: support
batched/deferred tlb shootdown during page reclamation/migration").
- Better maple tree lockdep checking from Liam Howlett ("More strict
maple tree lockdep"). Liam also developed some efficiency
improvements ("Reduce preallocations for maple tree").
- Cleanup and optimization to the secondary IOMMU TLB invalidation,
from Alistair Popple ("Invalidate secondary IOMMU TLB on permission
upgrade").
- Ryan Roberts fixes some arm64 MM selftest issues ("selftests/mm fixes
for arm64").
- Kemeng Shi provides some maintenance work on the compaction code
("Two minor cleanups for compaction").
- Some reduction in mmap_lock pressure from Matthew Wilcox ("Handle
most file-backed faults under the VMA lock").
- Aneesh Kumar contributes code to use the vmemmap optimization for DAX
on ppc64, under some circumstances ("Add support for DAX vmemmap
optimization for ppc64").
- page-ext cleanups from Kemeng Shi ("add page_ext_data to get client
data in page_ext"), ("minor cleanups to page_ext header").
- Some zswap cleanups from Johannes Weiner ("mm: zswap: three
cleanups").
- kmsan cleanups from ZhangPeng ("minor cleanups for kmsan").
- VMA handling cleanups from Kefeng Wang ("mm: convert to
vma_is_initial_heap/stack()").
- DAMON feature work from SeongJae Park ("mm/damon/sysfs-schemes:
implement DAMOS tried total bytes file"), ("Extend DAMOS filters for
address ranges and DAMON monitoring targets").
- Compaction work from Kemeng Shi ("Fixes and cleanups to compaction").
- Liam Howlett has improved the maple tree node replacement code
("maple_tree: Change replacement strategy").
- ZhangPeng has a general code cleanup - use the K() macro more widely
("cleanup with helper macro K()").
- Aneesh Kumar brings memmap-on-memory to ppc64 ("Add support for
memmap on memory feature on ppc64").
- pagealloc cleanups from Kemeng Shi ("Two minor cleanups for pcp list
in page_alloc"), ("Two minor cleanups for get pageblock
migratetype").
- Vishal Moola introduces a memory descriptor for page table tracking,
"struct ptdesc" ("Split ptdesc from struct page").
- memfd selftest maintenance work from Aleksa Sarai ("memfd: cleanups
for vm.memfd_noexec").
- MM include file rationalization from Hugh Dickins ("arch: include
asm/cacheflush.h in asm/hugetlb.h").
- THP debug output fixes from Hugh Dickins ("mm,thp: fix sloppy text
output").
- kmemleak improvements from Xiaolei Wang ("mm/kmemleak: use
object_cache instead of kmemleak_initialized").
- More folio-related cleanups from Matthew Wilcox ("Remove _folio_dtor
and _folio_order").
- A VMA locking scalability improvement from Suren Baghdasaryan
("Per-VMA lock support for swap and userfaults").
- pagetable handling cleanups from Matthew Wilcox ("New page table
range API").
- A batch of swap/thp cleanups from David Hildenbrand ("mm/swap: stop
using page->private on tail pages for THP_SWAP + cleanups").
- Cleanups and speedups to the hugetlb fault handling from Matthew
Wilcox ("Change calling convention for ->huge_fault").
- Matthew Wilcox has also done some maintenance work on the MM
subsystem documentation ("Improve mm documentation").
* tag 'mm-stable-2023-08-28-18-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (489 commits)
maple_tree: shrink struct maple_tree
maple_tree: clean up mas_wr_append()
secretmem: convert page_is_secretmem() to folio_is_secretmem()
nios2: fix flush_dcache_page() for usage from irq context
hugetlb: add documentation for vma_kernel_pagesize()
mm: add orphaned kernel-doc to the rst files.
mm: fix clean_record_shared_mapping_range kernel-doc
mm: fix get_mctgt_type() kernel-doc
mm: fix kernel-doc warning from tlb_flush_rmaps()
mm: remove enum page_entry_size
mm: allow ->huge_fault() to be called without the mmap_lock held
mm: move PMD_ORDER to pgtable.h
mm: remove checks for pte_index
memcg: remove duplication detection for mem_cgroup_uncharge_swap
mm/huge_memory: work on folio->swap instead of page->private when splitting folio
mm/swap: inline folio_set_swap_entry() and folio_swap_entry()
mm/swap: use dedicated entry for swap in folio
mm/swap: stop using page->private on tail pages for THP_SWAP
selftests/mm: fix WARNING comparing pointer to 0
selftests: cgroup: fix test_kmem_memcg_deletion kernel mem check
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Increase size limits for to-be-sent skb frag allocations. This
allows tun, tap devices and packet sockets to better cope with
large writes operations
- Store netdevs in an xarray, to simplify iterating over netdevs
- Refactor nexthop selection for multipath routes
- Improve sched class lifetime handling
- Add backup nexthop ID support for bridge
- Implement drop reasons support in openvswitch
- Several data races annotations and fixes
- Constify the sk parameter of routing functions
- Prepend kernel version to netconsole message
Protocols:
- Implement support for TCP probing the peer being under memory
pressure
- Remove hard coded limitation on IPv6 specific info placement inside
the socket struct
- Get rid of sysctl_tcp_adv_win_scale and use an auto-estimated per
socket scaling factor
- Scaling-up the IPv6 expired route GC via a separated list of
expiring routes
- In-kernel support for the TLS alert protocol
- Better support for UDP reuseport with connected sockets
- Add NEXT-C-SID support for SRv6 End.X behavior, reducing the SR
header size
- Get rid of additional ancillary per MPTCP connection struct socket
- Implement support for BPF-based MPTCP packet schedulers
- Format MPTCP subtests selftests results in TAP
- Several new SMC 2.1 features including unique experimental options,
max connections per lgr negotiation, max links per lgr negotiation
BPF:
- Multi-buffer support in AF_XDP
- Add multi uprobe BPF links for attaching multiple uprobes and usdt
probes, which is significantly faster and saves extra fds
- Implement an fd-based tc BPF attach API (TCX) and BPF link support
on top of it
- Add SO_REUSEPORT support for TC bpf_sk_assign
- Support new instructions from cpu v4 to simplify the generated code
and feature completeness, for x86, arm64, riscv64
- Support defragmenting IPv(4|6) packets in BPF
- Teach verifier actual bounds of bpf_get_smp_processor_id() and fix
perf+libbpf issue related to custom section handling
- Introduce bpf map element count and enable it for all program types
- Add a BPF hook in sys_socket() to change the protocol ID from
IPPROTO_TCP to IPPROTO_MPTCP to cover migration for legacy
- Introduce bpf_me_mcache_free_rcu() and fix OOM under stress
- Add uprobe support for the bpf_get_func_ip helper
- Check skb ownership against full socket
- Support for up to 12 arguments in BPF trampoline
- Extend link_info for kprobe_multi and perf_event links
Netfilter:
- Speed-up process exit by aborting ruleset validation if a fatal
signal is pending
- Allow NLA_POLICY_MASK to be used with BE16/BE32 types
Driver API:
- Page pool optimizations, to improve data locality and cache usage
- Introduce ndo_hwtstamp_get() and ndo_hwtstamp_set() to avoid the
need for raw ioctl() handling in drivers
- Simplify genetlink dump operations (doit/dumpit) providing them the
common information already populated in struct genl_info
- Extend and use the yaml devlink specs to [re]generate the split ops
- Introduce devlink selective dumps, to allow SF filtering SF based
on handle and other attributes
- Add yaml netlink spec for netlink-raw families, allow route, link
and address related queries via the ynl tool
- Remove phylink legacy mode support
- Support offload LED blinking to phy
- Add devlink port function attributes for IPsec
New hardware / drivers:
- Ethernet:
- Broadcom ASP 2.0 (72165) ethernet controller
- MediaTek MT7988 SoC
- Texas Instruments AM654 SoC
- Texas Instruments IEP driver
- Atheros qca8081 phy
- Marvell 88Q2110 phy
- NXP TJA1120 phy
- WiFi:
- MediaTek mt7981 support
- Can:
- Kvaser SmartFusion2 PCI Express devices
- Allwinner T113 controllers
- Texas Instruments tcan4552/4553 chips
- Bluetooth:
- Intel Gale Peak
- Qualcomm WCN3988 and WCN7850
- NXP AW693 and IW624
- Mediatek MT2925
Drivers:
- Ethernet NICs:
- nVidia/Mellanox:
- mlx5:
- support UDP encapsulation in packet offload mode
- IPsec packet offload support in eswitch mode
- improve aRFS observability by adding new set of counters
- extends MACsec offload support to cover RoCE traffic
- dynamic completion EQs
- mlx4:
- convert to use auxiliary bus instead of custom interface
logic
- Intel
- ice:
- implement switchdev bridge offload, even for LAG
interfaces
- implement SRIOV support for LAG interfaces
- igc:
- add support for multiple in-flight TX timestamps
- Broadcom:
- bnxt:
- use the unified RX page pool buffers for XDP and non-XDP
- use the NAPI skb allocation cache
- OcteonTX2:
- support Round Robin scheduling HTB offload
- TC flower offload support for SPI field
- Freescale:
- add XDP_TX feature support
- AMD:
- ionic: add support for PCI FLR event
- sfc:
- basic conntrack offload
- introduce eth, ipv4 and ipv6 pedit offloads
- ST Microelectronics:
- stmmac: maximze PTP timestamping resolution
- Virtual NICs:
- Microsoft vNIC:
- batch ringing RX queue doorbell on receiving packets
- add page pool for RX buffers
- Virtio vNIC:
- add per queue interrupt coalescing support
- Google vNIC:
- add queue-page-list mode support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add port range matching tc-flower offload
- permit enslavement to netdevices with uppers
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- convert to phylink_pcs
- Renesas:
- r8A779fx: add speed change support
- rzn1: enables vlan support
- Ethernet PHYs:
- convert mv88e6xxx to phylink_pcs
- WiFi:
- Qualcomm Wi-Fi 7 (ath12k):
- extremely High Throughput (EHT) PHY support
- RealTek (rtl8xxxu):
- enable AP mode for: RTL8192FU, RTL8710BU (RTL8188GU),
RTL8192EU and RTL8723BU
- RealTek (rtw89):
- Introduce Time Averaged SAR (TAS) support
- Connector:
- support for event filtering"
* tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1806 commits)
net: ethernet: mtk_wed: minor change in wed_{tx,rx}info_show
net: ethernet: mtk_wed: add some more info in wed_txinfo_show handler
net: stmmac: clarify difference between "interface" and "phy_interface"
r8152: add vendor/device ID pair for D-Link DUB-E250
devlink: move devlink_notify_register/unregister() to dev.c
devlink: move small_ops definition into netlink.c
devlink: move tracepoint definitions into core.c
devlink: push linecard related code into separate file
devlink: push rate related code into separate file
devlink: push trap related code into separate file
devlink: use tracepoint_enabled() helper
devlink: push region related code into separate file
devlink: push param related code into separate file
devlink: push resource related code into separate file
devlink: push dpipe related code into separate file
devlink: move and rename devlink_dpipe_send_and_alloc_skb() helper
devlink: push shared buffer related code into separate file
devlink: push port related code into separate file
devlink: push object register/unregister notifications into separate helpers
inet: fix IP_TRANSPARENT error handling
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"This contains the usual miscellaneous features, cleanups, and fixes
for vfs and individual filesystems.
Features:
- Block mode changes on symlinks and rectify our broken semantics
- Report file modifications via fsnotify() for splice
- Allow specifying an explicit timeout for the "rootwait" kernel
command line option. This allows to timeout and reboot instead of
always waiting indefinitely for the root device to show up
- Use synchronous fput for the close system call
Cleanups:
- Get rid of open-coded lockdep workarounds for async io submitters
and replace it all with a single consolidated helper
- Simplify epoll allocation helper
- Convert simple_write_begin and simple_write_end to use a folio
- Convert page_cache_pipe_buf_confirm() to use a folio
- Simplify __range_close to avoid pointless locking
- Disable per-cpu buffer head cache for isolated cpus
- Port ecryptfs to kmap_local_page() api
- Remove redundant initialization of pointer buf in pipe code
- Unexport the d_genocide() function which is only used within core
vfs
- Replace printk(KERN_ERR) and WARN_ON() with WARN()
Fixes:
- Fix various kernel-doc issues
- Fix refcount underflow for eventfds when used as EFD_SEMAPHORE
- Fix a mainly theoretical issue in devpts
- Check the return value of __getblk() in reiserfs
- Fix a racy assert in i_readcount_dec
- Fix integer conversion issues in various functions
- Fix LSM security context handling during automounts that prevented
NFS superblock sharing"
* tag 'v6.6-vfs.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (39 commits)
cachefiles: use kiocb_{start,end}_write() helpers
ovl: use kiocb_{start,end}_write() helpers
aio: use kiocb_{start,end}_write() helpers
io_uring: use kiocb_{start,end}_write() helpers
fs: create kiocb_{start,end}_write() helpers
fs: add kerneldoc to file_{start,end}_write() helpers
io_uring: rename kiocb_end_write() local helper
splice: Convert page_cache_pipe_buf_confirm() to use a folio
libfs: Convert simple_write_begin and simple_write_end to use a folio
fs/dcache: Replace printk and WARN_ON by WARN
fs/pipe: remove redundant initialization of pointer buf
fs: Fix kernel-doc warnings
devpts: Fix kernel-doc warnings
doc: idmappings: fix an error and rephrase a paragraph
init: Add support for rootwait timeout parameter
vfs: fix up the assert in i_readcount_dec
fs: Fix one kernel-doc comment
docs: filesystems: idmappings: clarify from where idmappings are taken
fs/buffer.c: disable per-CPU buffer_head cache for isolated CPUs
vfs, security: Fix automount superblock LSM init problem, preventing NFS sb sharing
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs timestamp updates from Christian Brauner:
"This adds VFS support for multi-grain timestamps and converts tmpfs,
xfs, ext4, and btrfs to use them. This carries acks from all relevant
filesystems.
The VFS always uses coarse-grained timestamps when updating the ctime
and mtime after a change. This has the benefit of allowing filesystems
to optimize away a lot of metadata updates, down to around 1 per
jiffy, even when a file is under heavy writes.
Unfortunately, this has always been an issue when we're exporting via
NFSv3, which relies on timestamps to validate caches. A lot of changes
can happen in a jiffy, so timestamps aren't sufficient to help the
client decide to invalidate the cache.
Even with NFSv4, a lot of exported filesystems don't properly support
a change attribute and are subject to the same problems with timestamp
granularity. Other applications have similar issues with timestamps
(e.g., backup applications).
If we were to always use fine-grained timestamps, that would improve
the situation, but that becomes rather expensive, as the underlying
filesystem would have to log a lot more metadata updates.
This introduces fine-grained timestamps that are used when they are
actively queried.
This uses the 31st bit of the ctime tv_nsec field to indicate that
something has queried the inode for the mtime or ctime. When this flag
is set, on the next mtime or ctime update, the kernel will fetch a
fine-grained timestamp instead of the usual coarse-grained one.
As POSIX generally mandates that when the mtime changes, the ctime
must also change the kernel always stores normalized ctime values, so
only the first 30 bits of the tv_nsec field are ever used.
Filesytems can opt into this behavior by setting the FS_MGTIME flag in
the fstype. Filesystems that don't set this flag will continue to use
coarse-grained timestamps.
Various preparatory changes, fixes and cleanups are included:
- Fixup all relevant places where POSIX requires updating ctime
together with mtime. This is a wide-range of places and all
maintainers provided necessary Acks.
- Add new accessors for inode->i_ctime directly and change all
callers to rely on them. Plain accesses to inode->i_ctime are now
gone and it is accordingly rename to inode->__i_ctime and commented
as requiring accessors.
- Extend generic_fillattr() to pass in a request mask mirroring in a
sense the statx() uapi. This allows callers to pass in a request
mask to only get a subset of attributes filled in.
- Rework timestamp updates so it's possible to drop the @now
parameter the update_time() inode operation and associated helpers.
- Add inode_update_timestamps() and convert all filesystems to it
removing a bunch of open-coding"
* tag 'v6.6-vfs.ctime' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (107 commits)
btrfs: convert to multigrain timestamps
ext4: switch to multigrain timestamps
xfs: switch to multigrain timestamps
tmpfs: add support for multigrain timestamps
fs: add infrastructure for multigrain timestamps
fs: drop the timespec64 argument from update_time
xfs: have xfs_vn_update_time gets its own timestamp
fat: make fat_update_time get its own timestamp
fat: remove i_version handling from fat_update_time
ubifs: have ubifs_update_time use inode_update_timestamps
btrfs: have it use inode_update_timestamps
fs: drop the timespec64 arg from generic_update_time
fs: pass the request_mask to generic_fillattr
fs: remove silly warning from current_time
gfs2: fix timestamp handling on quota inodes
fs: rename i_ctime field to __i_ctime
selinux: convert to ctime accessor functions
security: convert to ctime accessor functions
apparmor: convert to ctime accessor functions
sunrpc: convert to ctime accessor functions
...
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
include/net/inet_sock.h
f866fbc842de ("ipv4: fix data-races around inet->inet_id")
c274af224269 ("inet: introduce inet->inet_flags")
https://lore.kernel.org/all/679ddff6-db6e-4ff6-b177-574e90d0103d@tessares.net/
Adjacent changes:
drivers/net/bonding/bond_alb.c
e74216b8def3 ("bonding: fix macvlan over alb bond support")
f11e5bd159b0 ("bonding: support balance-alb with openvswitch")
drivers/net/ethernet/broadcom/bgmac.c
d6499f0b7c7c ("net: bgmac: Return PTR_ERR() for fixed_phy_register()")
23a14488ea58 ("net: bgmac: Fix return value check for fixed_phy_register()")
drivers/net/ethernet/broadcom/genet/bcmmii.c
32bbe64a1386 ("net: bcmgenet: Fix return value check for fixed_phy_register()")
acf50d1adbf4 ("net: bcmgenet: Return PTR_ERR() for fixed_phy_register()")
net/sctp/socket.c
f866fbc842de ("ipv4: fix data-races around inet->inet_id")
b09bde5c3554 ("inet: move inet->mc_loop to inet->inet_frags")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the helpers to simplify code.
Link: https://lkml.kernel.org/r/20230728050043.59880-4-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Stephen Smalley <stephen.smalley.work@gmail.com>
Cc: Eric Paris <eparis@parisplace.org>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Christian Göttsche <cgzones@googlemail.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@gmail.com>
Cc: Felix Kuehling <felix.kuehling@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Set the next pointer in filename_trans_read_helper() before attaching
the new node under construction to the list, otherwise garbage would be
dereferenced on subsequent failure during cleanup in the out goto label.
Cc: <stable@vger.kernel.org>
Fixes: 430059024389 ("selinux: implement new format of filename transitions")
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
KMSAN reports the following issue:
[ 81.822503] =====================================================
[ 81.823222] BUG: KMSAN: uninit-value in selinux_inet_conn_request+0x2c8/0x4b0
[ 81.823891] selinux_inet_conn_request+0x2c8/0x4b0
[ 81.824385] security_inet_conn_request+0xc0/0x160
[ 81.824886] tcp_v4_route_req+0x30e/0x490
[ 81.825343] tcp_conn_request+0xdc8/0x3400
[ 81.825813] tcp_v4_conn_request+0x134/0x190
[ 81.826292] tcp_rcv_state_process+0x1f4/0x3b40
[ 81.826797] tcp_v4_do_rcv+0x9ca/0xc30
[ 81.827236] tcp_v4_rcv+0x3bf5/0x4180
[ 81.827670] ip_protocol_deliver_rcu+0x822/0x1230
[ 81.828174] ip_local_deliver_finish+0x259/0x370
[ 81.828667] ip_local_deliver+0x1c0/0x450
[ 81.829105] ip_sublist_rcv+0xdc1/0xf50
[ 81.829534] ip_list_rcv+0x72e/0x790
[ 81.829941] __netif_receive_skb_list_core+0x10d5/0x1180
[ 81.830499] netif_receive_skb_list_internal+0xc41/0x1190
[ 81.831064] napi_complete_done+0x2c4/0x8b0
[ 81.831532] e1000_clean+0x12bf/0x4d90
[ 81.831983] __napi_poll+0xa6/0x760
[ 81.832391] net_rx_action+0x84c/0x1550
[ 81.832831] __do_softirq+0x272/0xa6c
[ 81.833239] __irq_exit_rcu+0xb7/0x1a0
[ 81.833654] irq_exit_rcu+0x17/0x40
[ 81.834044] common_interrupt+0x8d/0xa0
[ 81.834494] asm_common_interrupt+0x2b/0x40
[ 81.834949] default_idle+0x17/0x20
[ 81.835356] arch_cpu_idle+0xd/0x20
[ 81.835766] default_idle_call+0x43/0x70
[ 81.836210] do_idle+0x258/0x800
[ 81.836581] cpu_startup_entry+0x26/0x30
[ 81.837002] __pfx_ap_starting+0x0/0x10
[ 81.837444] secondary_startup_64_no_verify+0x17a/0x17b
[ 81.837979]
[ 81.838166] Local variable nlbl_type.i created at:
[ 81.838596] selinux_inet_conn_request+0xe3/0x4b0
[ 81.839078] security_inet_conn_request+0xc0/0x160
KMSAN warning is reproducible with:
* netlabel_mgmt_protocount is 0 (e.g. netlbl_enabled() returns 0)
* CONFIG_SECURITY_NETWORK_XFRM may be set or not
* CONFIG_KMSAN=y
* `ssh USER@HOSTNAME /bin/date`
selinux_skb_peerlbl_sid() will call selinux_xfrm_skb_sid(), then fall
to selinux_netlbl_skbuff_getsid() which will not initialize nlbl_type,
but it will be passed to:
err = security_net_peersid_resolve(nlbl_sid,
nlbl_type, xfrm_sid, sid);
and checked by KMSAN, although it will not be used inside
security_net_peersid_resolve() (at least now), since this function
will check either (xfrm_sid == SECSID_NULL) or (nlbl_sid ==
SECSID_NULL) first and return before using uninitialized nlbl_type.
Signed-off-by: Andrew Kanner <andrew.kanner@gmail.com>
[PM: subject line tweak, removed 'fixes' tag as code is not broken]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
SELinux registers the implementation for the "binder_transfer_file"
hook. Looking at the function implementation we observe that the
parameter "file" is not changing.
Mark the "file" parameter of LSM hook security_binder_transfer_file() as
"const" since it will not be changing in the LSM hook.
Signed-off-by: Khadija Kamran <kamrankhadijadj@gmail.com>
[PM: subject line whitespace fix]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
sharing
When NFS superblocks are created by automounting, their LSM parameters
aren't set in the fs_context struct prior to sget_fc() being called,
leading to failure to match existing superblocks.
This bug leads to messages like the following appearing in dmesg when
fscache is enabled:
NFS: Cache volume key already in use (nfs,4.2,2,108,106a8c0,1,,,,100000,100000,2ee,3a98,1d4c,3a98,1)
Fix this by adding a new LSM hook to load fc->security for submount
creation.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/165962680944.3334508.6610023900349142034.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/165962729225.3357250.14350728846471527137.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/165970659095.2812394.6868894171102318796.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/166133579016.3678898.6283195019480567275.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/217595.1662033775@warthog.procyon.org.uk/ # v5
Fixes: 9bc61ab18b1d ("vfs: Introduce fs_context, switch vfs_kern_mount() to it.")
Fixes: 779df6a5480f ("NFS: Ensure security label is set for root inode")
Tested-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: "Christian Brauner (Microsoft)" <brauner@kernel.org>
Acked-by: Paul Moore <paul@paul-moore.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Message-Id: <20230808-master-v9-1-e0ecde888221@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Use an unsigned type as loop iterator.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Use the identical type for local variables, e.g. loop counters.
Declare members of struct policydb_compat_info unsigned to consistently
use unsigned iterators. They hold read-only non-negative numbers in the
global variable policydb_compat.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Use umode_t as parameter type for sel_make_inode(), which assigns the
value to the member i_mode of struct inode.
Use identical and unsigned types for loop iterators.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
The loops upper bound represent the number of permissions used (for the
current class or in general). The limit for this is 32, thus we might
left shift of one less, 31. Shifting a base of 1 results in undefined
behavior; use (u32)1 as base.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Security classes have only up to 32 permissions, hence using an u16 is
sufficient (while improving padding in struct selinux_mapping).
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Return u32 from avtab_hash() instead of int, since the hashing is done
on u32 and the result is used as an index on the hash array.
Use the type of the limit in for loops.
Avoid signed to unsigned conversion of multiplication result in
avtab_hash_eval() and perform multiplication in destination type.
Use unsigned loop iterator for index operations, to avoid sign
extension.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
This commit reverts 5b0eea835d4e ("selinux: introduce an initial SID
for early boot processes") as it was found to cause problems on
distros with old SELinux userspace tools/libraries, specifically
Ubuntu 16.04.
Hopefully we will be able to re-add this functionality at a later
date, but let's revert this for now to help ensure a stable and
backwards compatible SELinux tree.
Link: https://lore.kernel.org/selinux/87edkseqf8.fsf@mail.lhotse
Acked-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Three LSMs register the implementations for the "capget" hook: AppArmor,
SELinux, and the normal capability code. Looking at the function
implementations we may observe that the first parameter "target" is not
changing.
Mark the first argument "target" of LSM hook security_capget() as
"const" since it will not be changing in the LSM hook.
cap_capget() LSM hook declaration exceeds the 80 characters per line
limit. Split the function declaration to multiple lines to decrease the
line length.
Signed-off-by: Khadija Kamran <kamrankhadijadj@gmail.com>
Acked-by: John Johansen <john.johansen@canonical.com>
[PM: align the cap_capget() declaration, spelling fixes]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Use GFP_KERNEL instead of GFP_ATOMIC while reading a binary policy in
sens_read() and cat_read(), similar to surrounding code.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
After commit f22f9aaf6c3d ("selinux: remove the runtime disable
functionality"), the comment on selinux_hooks[] is out-of-date,
remove the last paragraph about runtime disable functionality.
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Use u32 as the output parameter type in security_get_classes() and
security_get_permissions(), based on the type of the symtab nprim
member.
Declare the read-only class string parameter of
security_get_permissions() const.
Avoid several implicit conversions by using the identical type for the
destination.
Use the type identical to the source for local variables.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
[PM: cleanup extra whitespace in subject]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Use u32 for ebitmap bits and sensitivity levels, char for the default
range of a class.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
[PM: description tweaks]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Use the identical type u32 for the loop iterator.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
[PM: remove extra whitespace in subject]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
avtab_hash_eval() and hashtab_stat() are only used in policydb.c when
the configuration SECURITY_SELINUX_DEBUG is enabled.
Move the function definitions under that configuration as well and
provide empty definitions in case SECURITY_SELINUX_DEBUG is disabled, to
avoid using #ifdef in the callers.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
In case virtual memory is being marked as executable by default, SELinux
checks regarding explicit potential dangerous use are disabled.
Inform the user about it.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
In later patches, we're going to change how the inode's ctime field is
used. Switch to using accessor functions instead of raw accesses of
inode->i_ctime.
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230705190309.579783-89-jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Use a NULL instead of a zero to resolve a int/pointer mismatch.
Cc: Paolo Abeni <pabeni@redhat.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202307210332.4AqFZfzI-lkp@intel.com/
Fixes: dd51fcd42fd6 ("selinux: introduce and use lsm_ad_net_init*() helpers")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
The policy database code contains several debug output statements
related to hashtable utilization. Those are guarded by the macro
DEBUG_HASHES, which is neither documented nor set anywhere.
Introduce a new Kconfig configuration guarding this and potential
other future debugging related code. Disable the setting by default.
Suggested-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
[PM: fixed line lengths in the help text]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Perf traces of network-related workload shows a measurable overhead
inside the network-related selinux hooks while zeroing the
lsm_network_audit struct.
In most cases we can delay the initialization of such structure to the
usage point, avoiding such overhead in a few cases.
Additionally, the audit code accesses the IP address information only
for AF_INET* families, and selinux_parse_skb() will fill-out the
relevant fields in such cases. When the family field is zeroed or the
initialization is followed by the mentioned parsing, the zeroing can be
limited to the sk, family and netif fields.
By factoring out the audit-data initialization to new helpers, this
patch removes some duplicate code and gives small but measurable
performance gain under UDP flood.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Update my email address; MAINTAINERS was updated some time ago.
Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
The kernel print statements do not append an implicit newline to format
strings.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
[PM: subject line tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
avtab_search() shares the same logic with avtab_search_node(), except
that it returns, if found, a pointer to the struct avtab_node member
datum instead of the node itself. Since the member is an embedded
struct, and not a pointer, the returned value of avtab_search() and
avtab_search_node() will always in unison either be NULL or non-NULL.
Drop avtab_search() and replace its calls by avtab_search_node() to
deduplicate logic and adopt the only caller caring for the type of
the returned value accordingly.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
