summaryrefslogtreecommitdiff
path: root/security
AgeCommit message (Collapse)AuthorFilesLines
2017-11-14Merge branch 'linus' of ↵Linus Torvalds1-39/+17
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "Here is the crypto update for 4.15: API: - Disambiguate EBUSY when queueing crypto request by adding ENOSPC. This change touches code outside the crypto API. - Reset settings when empty string is written to rng_current. Algorithms: - Add OSCCA SM3 secure hash. Drivers: - Remove old mv_cesa driver (replaced by marvell/cesa). - Enable rfc3686/ecb/cfb/ofb AES in crypto4xx. - Add ccm/gcm AES in crypto4xx. - Add support for BCM7278 in iproc-rng200. - Add hash support on Exynos in s5p-sss. - Fix fallback-induced error in vmx. - Fix output IV in atmel-aes. - Fix empty GCM hash in mediatek. Others: - Fix DoS potential in lib/mpi. - Fix potential out-of-order issues with padata" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (162 commits) lib/mpi: call cond_resched() from mpi_powm() loop crypto: stm32/hash - Fix return issue on update crypto: dh - Remove pointless checks for NULL 'p' and 'g' crypto: qat - Clean up error handling in qat_dh_set_secret() crypto: dh - Don't permit 'key' or 'g' size longer than 'p' crypto: dh - Don't permit 'p' to be 0 crypto: dh - Fix double free of ctx->p hwrng: iproc-rng200 - Add support for BCM7278 dt-bindings: rng: Document BCM7278 RNG200 compatible crypto: chcr - Replace _manual_ swap with swap macro crypto: marvell - Add a NULL entry at the end of mv_cesa_plat_id_table[] hwrng: virtio - Virtio RNG devices need to be re-registered after suspend/resume crypto: atmel - remove empty functions crypto: ecdh - remove empty exit() MAINTAINERS: update maintainer for qat crypto: caam - remove unused param of ctx_map_to_sec4_sg() crypto: caam - remove unneeded edesc zeroization crypto: atmel-aes - Reset the controller before each use crypto: atmel-aes - properly set IV after {en,de}crypt hwrng: core - Reset user selected rng by writing "" to rng_current ...
2017-11-14Merge branch 'timers-core-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "Yet another big pile of changes: - More year 2038 work from Arnd slowly reaching the point where we need to think about the syscalls themself. - A new timer function which allows to conditionally (re)arm a timer only when it's either not running or the new expiry time is sooner than the armed expiry time. This allows to use a single timer for multiple timeout requirements w/o caring about the first expiry time at the call site. - A new NMI safe accessor to clock real time for the printk timestamp work. Can be used by tracing, perf as well if required. - A large number of timer setup conversions from Kees which got collected here because either maintainers requested so or they simply got ignored. As Kees pointed out already there are a few trivial merge conflicts and some redundant commits which was unavoidable due to the size of this conversion effort. - Avoid a redundant iteration in the timer wheel softirq processing. - Provide a mechanism to treat RTC implementations depending on their hardware properties, i.e. don't inflict the write at the 0.5 seconds boundary which originates from the PC CMOS RTC to all RTCs. No functional change as drivers need to be updated separately. - The usual small updates to core code clocksource drivers. Nothing really exciting" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (111 commits) timers: Add a function to start/reduce a timer pstore: Use ktime_get_real_fast_ns() instead of __getnstimeofday() timer: Prepare to change all DEFINE_TIMER() callbacks netfilter: ipvs: Convert timers to use timer_setup() scsi: qla2xxx: Convert timers to use timer_setup() block/aoe: discover_timer: Convert timers to use timer_setup() ide: Convert timers to use timer_setup() drbd: Convert timers to use timer_setup() mailbox: Convert timers to use timer_setup() crypto: Convert timers to use timer_setup() drivers/pcmcia: omap1: Fix error in automated timer conversion ARM: footbridge: Fix typo in timer conversion drivers/sgi-xp: Convert timers to use timer_setup() drivers/pcmcia: Convert timers to use timer_setup() drivers/memstick: Convert timers to use timer_setup() drivers/macintosh: Convert timers to use timer_setup() hwrng/xgene-rng: Convert timers to use timer_setup() auxdisplay: Convert timers to use timer_setup() sparc/led: Convert timers to use timer_setup() mips: ip22/32: Convert timers to use timer_setup() ...
2017-11-13Merge branch 'locking-core-for-linus' of ↵Linus Torvalds2-15/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core locking updates from Ingo Molnar: "The main changes in this cycle are: - Another attempt at enabling cross-release lockdep dependency tracking (automatically part of CONFIG_PROVE_LOCKING=y), this time with better performance and fewer false positives. (Byungchul Park) - Introduce lockdep_assert_irqs_enabled()/disabled() and convert open-coded equivalents to lockdep variants. (Frederic Weisbecker) - Add down_read_killable() and use it in the VFS's iterate_dir() method. (Kirill Tkhai) - Convert remaining uses of ACCESS_ONCE() to READ_ONCE()/WRITE_ONCE(). Most of the conversion was Coccinelle driven. (Mark Rutland, Paul E. McKenney) - Get rid of lockless_dereference(), by strengthening Alpha atomics, strengthening READ_ONCE() with smp_read_barrier_depends() and thus being able to convert users of lockless_dereference() to READ_ONCE(). (Will Deacon) - Various micro-optimizations: - better PV qspinlocks (Waiman Long), - better x86 barriers (Michael S. Tsirkin) - better x86 refcounts (Kees Cook) - ... plus other fixes and enhancements. (Borislav Petkov, Juergen Gross, Miguel Bernal Marin)" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits) locking/x86: Use LOCK ADD for smp_mb() instead of MFENCE rcu: Use lockdep to assert IRQs are disabled/enabled netpoll: Use lockdep to assert IRQs are disabled/enabled timers/posix-cpu-timers: Use lockdep to assert IRQs are disabled/enabled sched/clock, sched/cputime: Use lockdep to assert IRQs are disabled/enabled irq_work: Use lockdep to assert IRQs are disabled/enabled irq/timings: Use lockdep to assert IRQs are disabled/enabled perf/core: Use lockdep to assert IRQs are disabled/enabled x86: Use lockdep to assert IRQs are disabled/enabled smp/core: Use lockdep to assert IRQs are disabled/enabled timers/hrtimer: Use lockdep to assert IRQs are disabled/enabled timers/nohz: Use lockdep to assert IRQs are disabled/enabled workqueue: Use lockdep to assert IRQs are disabled/enabled irq/softirqs: Use lockdep to assert IRQs are disabled/enabled locking/lockdep: Add IRQs disabled/enabled assertion APIs: lockdep_assert_irqs_enabled()/disabled() locking/pvqspinlock: Implement hybrid PV queued/unfair locks locking/rwlocks: Fix comments x86/paravirt: Set up the virt_spin_lock_key after static keys get initialized block, locking/lockdep: Assign a lock_class per gendisk used for wait_for_completion() workqueue: Remove now redundant lock acquisitions wrt. workqueue flushes ...
2017-11-13Merge branch 'next-integrity' of ↵Linus Torvalds13-110/+108
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull security subsystem integrity updates from James Morris: "There is a mixture of bug fixes, code cleanup, preparatory code for new functionality and new functionality. Commit 26ddabfe96bb ("evm: enable EVM when X509 certificate is loaded") enabled EVM without loading a symmetric key, but was limited to defining the x509 certificate pathname at build. Included in this set of patches is the ability of enabling EVM, without loading the EVM symmetric key, from userspace. New is the ability to prevent the loading of an EVM symmetric key." * 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: ima: Remove redundant conditional operator ima: Fix bool initialization/comparison ima: check signature enforcement against cmdline param instead of CONFIG module: export module signature enforcement status ima: fix hash algorithm initialization EVM: Only complain about a missing HMAC key once EVM: Allow userspace to signal an RSA key has been loaded EVM: Include security.apparmor in EVM measurements ima: call ima_file_free() prior to calling fasync integrity: use kernel_read_file_from_path() to read x509 certs ima: always measure and audit files in policy ima: don't remove the securityfs policy file vfs: fix mounting a filesystem with i_version
2017-11-13Merge branch 'next-general' of ↵Linus Torvalds6-99/+220
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull general security subsystem updates from James Morris: "TPM (from Jarkko): - essential clean up for tpm_crb so that ARM64 and x86 versions do not distract each other as much as before - /dev/tpm0 rejects now too short writes (shorter buffer than specified in the command header - use DMA-safe buffer in tpm_tis_spi - otherwise mostly minor fixes. Smack: - base support for overlafs Capabilities: - BPRM_FCAPS fixes, from Richard Guy Briggs: The audit subsystem is adding a BPRM_FCAPS record when auditing setuid application execution (SYSCALL execve). This is not expected as it was supposed to be limited to when the file system actually had capabilities in an extended attribute. It lists all capabilities making the event really ugly to parse what is happening. The PATH record correctly records the setuid bit and owner. Suppress the BPRM_FCAPS record on set*id. TOMOYO: - Y2038 timestamping fixes" * 'next-general' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (28 commits) MAINTAINERS: update the IMA, EVM, trusted-keys, encrypted-keys entries Smack: Base support for overlayfs MAINTAINERS: remove David Safford as maintainer for encrypted+trusted keys tomoyo: fix timestamping for y2038 capabilities: audit log other surprising conditions capabilities: fix logic for effective root or real root capabilities: invert logic for clarity capabilities: remove a layer of conditional logic capabilities: move audit log decision to function capabilities: use intuitive names for id changes capabilities: use root_priveleged inline to clarify logic capabilities: rename has_cap to has_fcap capabilities: intuitive names for cap gain status capabilities: factor out cap_bprm_set_creds privileged root tpm, tpm_tis: use ARRAY_SIZE() to define TPM_HID_USR_IDX tpm: fix duplicate inline declaration specifier tpm: fix type of a local variables in tpm_tis_spi.c tpm: fix type of a local variable in tpm2_map_command() tpm: fix type of a local variable in tpm2_get_cc_attrs_tbl() tpm-dev-common: Reject too short writes ...
2017-11-08ima: Remove redundant conditional operatorThiago Jung Bauermann1-2/+2
A non-zero value is converted to 1 when assigned to a bool variable, so the conditional operator in is_ima_appraise_enabled is redundant. The value of a comparison operator is either 1 or 0 so the conditional operator in ima_inode_setxattr is redundant as well. Confirmed that the patch is correct by comparing the object file from before and after the patch. They are identical. Signed-off-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2017-11-08ima: Fix bool initialization/comparisonThomas Meyer2-4/+4
Bool initializations should use true and false. Bool tests don't need comparisons. Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2017-11-08ima: check signature enforcement against cmdline param instead of CONFIGBruno E. O. Meneguele1-3/+3
When the user requests MODULE_CHECK policy and its kernel is compiled with CONFIG_MODULE_SIG_FORCE not set, all modules would not load, just those loaded in initram time. One option the user would have would be set a kernel cmdline param (module.sig_enforce) to true, but the IMA module check code doesn't rely on this value, it checks just CONFIG_MODULE_SIG_FORCE. This patch solves this problem checking for the exported value of module.sig_enforce cmdline param intead of CONFIG_MODULE_SIG_FORCE, which holds the effective value (CONFIG || param). Signed-off-by: Bruno E. O. Meneguele <brdeoliv@redhat.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2017-11-08ima: fix hash algorithm initializationBoshi Wang1-0/+4
The hash_setup function always sets the hash_setup_done flag, even when the hash algorithm is invalid. This prevents the default hash algorithm defined as CONFIG_IMA_DEFAULT_HASH from being used. This patch sets hash_setup_done flag only for valid hash algorithms. Fixes: e7a2ad7eb6f4 "ima: enable support for larger default filedata hash algorithms" Signed-off-by: Boshi Wang <wangboshi@huawei.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2017-11-08EVM: Only complain about a missing HMAC key onceMatthew Garrett1-1/+1
A system can validate EVM digital signatures without requiring an HMAC key, but every EVM validation will generate a kernel error. Change this so we only generate an error once. Signed-off-by: Matthew Garrett <mjg59@google.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2017-11-08EVM: Allow userspace to signal an RSA key has been loadedMatthew Garrett2-12/+20
EVM will only perform validation once a key has been loaded. This key may either be a symmetric trusted key (for HMAC validation and creation) or the public half of an asymmetric key (for digital signature validation). The /sys/kernel/security/evm interface allows userland to signal that a symmetric key has been loaded, but does not allow userland to signal that an asymmetric public key has been loaded. This patch extends the interface to permit userspace to pass a bitmask of loaded key types. It also allows userspace to block loading of a symmetric key in order to avoid a compromised system from being able to load an additional key type later. Signed-off-by: Matthew Garrett <mjg59@google.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2017-11-08EVM: Include security.apparmor in EVM measurementsMatthew Garrett1-0/+3
Apparmor will be gaining support for security.apparmor labels, and it would be helpful to include these in EVM validation now so appropriate signatures can be generated even before full support is merged. Signed-off-by: Matthew Garrett <mjg59@google.com> Acked-by: John Johansen <John.johansen@canonical.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2017-11-08integrity: use kernel_read_file_from_path() to read x509 certsChristoph Hellwig4-56/+13
The CONFIG_IMA_LOAD_X509 and CONFIG_EVM_LOAD_X509 options permit loading x509 signed certificates onto the trusted keyrings without verifying the x509 certificate file's signature. This patch replaces the call to the integrity_read_file() specific function with the common kernel_read_file_from_path() function. To avoid verifying the file signature, this patch defines READING_X509_CERTFICATE. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2017-11-08ima: always measure and audit files in policyMimi Zohar3-30/+56
All files matching a "measure" rule must be included in the IMA measurement list, even when the file hash cannot be calculated. Similarly, all files matching an "audit" rule must be audited, even when the file hash can not be calculated. The file data hash field contained in the IMA measurement list template data will contain 0's instead of the actual file hash digest. Note: In general, adding, deleting or in anyway changing which files are included in the IMA measurement list is not a good idea, as it might result in not being able to unseal trusted keys sealed to a specific TPM PCR value. This patch not only adds file measurements that were not previously measured, but specifies that the file hash value for these files will be 0's. As the IMA measurement list ordering is not consistent from one boot to the next, it is unlikely that anyone is sealing keys based on the IMA measurement list. Remote attestation servers should be able to process these new measurement records, but might complain about these unknown records. Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Reviewed-by: Dmitry Kasatkin <dmitry.kasatkin@huawei.com>
2017-11-08ima: don't remove the securityfs policy fileMimi Zohar1-2/+2
The securityfs policy file is removed unless additional rules can be appended to the IMA policy (CONFIG_IMA_WRITE_POLICY), regardless as to whether the policy is configured so that it can be displayed. This patch changes this behavior, removing the securityfs policy file, only if CONFIG_IMA_READ_POLICY is also not enabled. Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2017-11-08apparmor: fix off-by-one comparison on MAXMAPPED_SIGJohn Johansen1-2/+2
This came in yesterday, and I have verified our regression tests were missing this and it can cause an oops. Please apply. There is a an off-by-one comparision on sig against MAXMAPPED_SIG that can lead to a read outside the sig_map array if sig is MAXMAPPED_SIG. Fix this. Verified that the check is an out of bounds case that can cause an oops. Revised: add comparison fix to second case Fixes: cd1dbf76b23d ("apparmor: add the ability to mediate signals") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: John Johansen <john.johansen@canonical.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-07Merge branch 'linus' into locking/core, to resolve conflictsIngo Molnar62-871/+96
Conflicts: include/linux/compiler-clang.h include/linux/compiler-gcc.h include/linux/compiler-intel.h include/uapi/linux/stddef.h Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-03ima: move to generic async completionGilad Ben-Yossef1-39/+17
ima starts several async crypto ops and waits for their completions. Move it over to generic code doing the same. Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com> Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-02Merge tag 'spdx_identifiers-4.14-rc8' of ↵Linus Torvalds49-0/+49
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull initial SPDX identifiers from Greg KH: "License cleanup: add SPDX license identifiers to some files Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: License cleanup: add SPDX license identifier to uapi header files with a license License cleanup: add SPDX license identifier to uapi header files with no license License cleanup: add SPDX GPL-2.0 license identifier to files with no license
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman49-0/+49
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02KEYS: trusted: fix writing past end of buffer in trusted_read()Eric Biggers1-11/+12
When calling keyctl_read() on a key of type "trusted", if the user-supplied buffer was too small, the kernel ignored the buffer length and just wrote past the end of the buffer, potentially corrupting userspace memory. Fix it by instead returning the size required, as per the documentation for keyctl_read(). We also don't even fill the buffer at all in this case, as this is slightly easier to implement than doing a short read, and either behavior appears to be permitted. It also makes it match the behavior of the "encrypted" key type. Fixes: d00a1c72f7f4 ("keys: add new trusted key-type") Reported-by: Ben Hutchings <ben@decadent.org.uk> Cc: <stable@vger.kernel.org> # v2.6.38+ Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Reviewed-by: James Morris <james.l.morris@oracle.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-11-02KEYS: return full count in keyring_read() if buffer is too smallEric Biggers1-20/+19
Commit e645016abc80 ("KEYS: fix writing past end of user-supplied buffer in keyring_read()") made keyring_read() stop corrupting userspace memory when the user-supplied buffer is too small. However it also made the return value in that case be the short buffer size rather than the size required, yet keyctl_read() is actually documented to return the size required. Therefore, switch it over to the documented behavior. Note that for now we continue to have it fill the short buffer, since it did that before (pre-v3.13) and dump_key_tree_aux() in keyutils arguably relies on it. Fixes: e645016abc80 ("KEYS: fix writing past end of user-supplied buffer in keyring_read()") Reported-by: Ben Hutchings <ben@decadent.org.uk> Cc: <stable@vger.kernel.org> # v3.13+ Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: James Morris <james.l.morris@oracle.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-11-02Smack: Base support for overlayfsCasey Schaufler1-0/+79
Supply the Smack module hooks in support of overlayfs. Ensure that the Smack label of new files gets the correct value when a directory is transmuting. Original implementation by Romanini Daniele, with a few tweaks added. Signed-off-by: Romanini Daniele <daniele.romanini@aalto.fi> Signed-off-by: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-10-26Revert "apparmor: add base infastructure for socket mediation"Linus Torvalds12-840/+16
This reverts commit 651e28c5537abb39076d3949fb7618536f1d242e. This caused a regression: "The specific problem is that dnsmasq refuses to start on openSUSE Leap 42.2. The specific cause is that and attempt to open a PF_LOCAL socket gets EACCES. This means that networking doesn't function on a system with a 4.14-rc2 system." Sadly, the developers involved seemed to be in denial for several weeks about this, delaying the revert. This has not been a good release for the security subsystem, and this area needs to change development practices. Reported-and-bisected-by: James Bottomley <James.Bottomley@hansenpartnership.com> Tracked-by: Thorsten Leemhuis <regressions@leemhuis.info> Cc: John Johansen <john.johansen@canonical.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Seth Arnold <seth.arnold@canonical.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-10-24Merge tag 'v4.14-rc6' into locking/core, to pick up fixesIngo Molnar15-54/+90
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-21tomoyo: fix timestamping for y2038Arnd Bergmann4-34/+13
Tomoyo uses an open-coded version of time_to_tm() to create a timestamp from the current time as read by get_seconds(). This will overflow and give wrong results on 32-bit systems in 2038. To correct this, this changes the code to use ktime_get_real_seconds() and the generic time64_to_tm() function that are both y2038-safe. Using the library function avoids adding an expensive 64-bit division in this code and can benefit from any optimizations we do in common code. Acked-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-10-20capabilities: audit log other surprising conditionsRichard Guy Briggs1-7/+22
The existing condition tested for process effective capabilities set by file attributes but intended to ignore the change if the result was unsurprisingly an effective full set in the case root is special with a setuid root executable file and we are root. Stated again: - When you execute a setuid root application, it is no surprise and expected that it got all capabilities, so we do not want capabilities recorded. if (pE_grew && !(pE_fullset && (eff_root || real_root) && root_priveleged) ) Now make sure we cover other cases: - If something prevented a setuid root app getting all capabilities and it wound up with one capability only, then it is a surprise and should be logged. When it is a setuid root file, we only want capabilities when the process does not get full capabilities.. root_priveleged && setuid_root && !pE_fullset - Similarly if a non-setuid program does pick up capabilities due to file system based capabilities, then we want to know what capabilities were picked up. When it has file system based capabilities we want the capabilities. !is_setuid && (has_fcap && pP_gained) - If it is a non-setuid file and it gets ambient capabilities, we want the capabilities. !is_setuid && pA_gained - These last two are combined into one due to the common first parameter. Related: https://github.com/linux-audit/audit-kernel/issues/16 Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Reviewed-by: Serge Hallyn <serge@hallyn.com> Acked-by: James Morris <james.l.morris@oracle.com> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Paul Moore <paul@paul-moore.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-10-20capabilities: fix logic for effective root or real rootRichard Guy Briggs1-3/+2
Now that the logic is inverted, it is much easier to see that both real root and effective root conditions had to be met to avoid printing the BPRM_FCAPS record with audit syscalls. This meant that any setuid root applications would print a full BPRM_FCAPS record when it wasn't necessary, cluttering the event output, since the SYSCALL and PATH records indicated the presence of the setuid bit and effective root user id. Require only one of effective root or real root to avoid printing the unnecessary record. Ref: commit 3fc689e96c0c ("Add audit_log_bprm_fcaps/AUDIT_BPRM_FCAPS") See: https://github.com/linux-audit/audit-kernel/issues/16 Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Reviewed-by: Serge Hallyn <serge@hallyn.com> Acked-by: James Morris <james.l.morris@oracle.com> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Paul Moore <paul@paul-moore.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-10-20capabilities: invert logic for clarityRichard Guy Briggs1-4/+4
The way the logic was presented, it was awkward to read and verify. Invert the logic using DeMorgan's Law to be more easily able to read and understand. Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Reviewed-by: Serge Hallyn <serge@hallyn.com> Acked-by: James Morris <james.l.morris@oracle.com> Acked-by: Kees Cook <keescook@chromium.org> Okay-ished-by: Paul Moore <paul@paul-moore.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-10-20capabilities: remove a layer of conditional logicRichard Guy Briggs1-13/+10
Remove a layer of conditional logic to make the use of conditions easier to read and analyse. Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Reviewed-by: Serge Hallyn <serge@hallyn.com> Acked-by: James Morris <james.l.morris@oracle.com> Acked-by: Kees Cook <keescook@chromium.org> Okay-ished-by: Paul Moore <paul@paul-moore.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-10-20capabilities: move audit log decision to functionRichard Guy Briggs1-20/+30
Move the audit log decision logic to its own function to isolate the complexity in one place. Suggested-by: Serge Hallyn <serge@hallyn.com> Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Reviewed-by: Serge Hallyn <serge@hallyn.com> Acked-by: James Morris <james.l.morris@oracle.com> Acked-by: Kees Cook <keescook@chromium.org> Okay-ished-by: Paul Moore <paul@paul-moore.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-10-20capabilities: use intuitive names for id changesRichard Guy Briggs1-6/+22
Introduce a number of inlines to make the use of the negation of uid_eq() easier to read and analyse. Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Reviewed-by: Serge Hallyn <serge@hallyn.com> Acked-by: James Morris <james.l.morris@oracle.com> Acked-by: Kees Cook <keescook@chromium.org> Okay-ished-by: Paul Moore <paul@paul-moore.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-10-20capabilities: use root_priveleged inline to clarify logicRichard Guy Briggs1-2/+4
Introduce inline root_privileged() to make use of SECURE_NONROOT easier to read. Suggested-by: Serge Hallyn <serge@hallyn.com> Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Reviewed-by: Serge Hallyn <serge@hallyn.com> Acked-by: James Morris <james.l.morris@oracle.com> Acked-by: Kees Cook <keescook@chromium.org> Okay-ished-by: Paul Moore <paul@paul-moore.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-10-20capabilities: rename has_cap to has_fcapRichard Guy Briggs1-10/+10
Rename has_cap to has_fcap to clarify it applies to file capabilities since the entire source file is about capabilities. Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Reviewed-by: Serge Hallyn <serge@hallyn.com> Acked-by: James Morris <james.l.morris@oracle.com> Acked-by: Kees Cook <keescook@chromium.org> Okay-ished-by: Paul Moore <paul@paul-moore.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-10-20capabilities: intuitive names for cap gain statusRichard Guy Briggs1-7/+11
Introduce macros cap_gained, cap_grew, cap_full to make the use of the negation of is_subset() easier to read and analyse. Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Reviewed-by: Serge Hallyn <serge@hallyn.com> Acked-by: James Morris <james.l.morris@oracle.com> Acked-by: Kees Cook <keescook@chromium.org> Okay-ished-by: Paul Moore <paul@paul-moore.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-10-20capabilities: factor out cap_bprm_set_creds privileged rootRichard Guy Briggs1-28/+48
Factor out the case of privileged root from the function cap_bprm_set_creds() to make the latter easier to read and analyse. Suggested-by: Serge Hallyn <serge@hallyn.com> Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Reviewed-by: Serge Hallyn <serge@hallyn.com> Acked-by: James Morris <james.l.morris@oracle.com> Acked-by: Kees Cook <keescook@chromium.org> Okay-ished-by: Paul Moore <paul@paul-moore.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-10-19commoncap: move assignment of fs_ns to avoid null pointer dereferenceColin Ian King1-1/+2
The pointer fs_ns is assigned from inode->i_ib->s_user_ns before a null pointer check on inode, hence if inode is actually null we will get a null pointer dereference on this assignment. Fix this by only dereferencing inode after the null pointer check on inode. Detected by CoverityScan CID#1455328 ("Dereference before null check") Fixes: 8db6c34f1dbc ("Introduce v3 namespaced file capabilities") Signed-off-by: Colin Ian King <colin.king@canonical.com> Cc: stable@vger.kernel.org Acked-by: Serge Hallyn <serge@hallyn.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-10-19Merge commit 'tags/keys-fixes-20171018' into fixes-v4.14-rc5James Morris14-53/+88
2017-10-18KEYS: load key flags and expiry time atomically in proc_keys_show()Eric Biggers1-10/+14
In proc_keys_show(), the key semaphore is not held, so the key ->flags and ->expiry can be changed concurrently. We therefore should read them atomically just once. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com>
2017-10-18KEYS: Load key expiry time atomically in keyring_search_iterator()Eric Biggers1-1/+3
Similar to the case for key_validate(), we should load the key ->expiry once atomically in keyring_search_iterator(), since it can be changed concurrently with the flags whenever the key semaphore isn't held. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com>
2017-10-18KEYS: load key flags and expiry time atomically in key_validate()Eric Biggers1-3/+4
In key_validate(), load the flags and expiry time once atomically, since these can change concurrently if key_validate() is called without the key semaphore held. And we don't want to get inconsistent results if a variable is referenced multiple times. For example, key->expiry was referenced in both 'if (key->expiry)' and in 'if (now.tv_sec >= key->expiry)', making it theoretically possible to see a spurious EKEYEXPIRED while the expiration time was being removed, i.e. set to 0. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com>
2017-10-18KEYS: don't let add_key() update an uninstantiated keyDavid Howells1-0/+10
Currently, when passed a key that already exists, add_key() will call the key's ->update() method if such exists. But this is heavily broken in the case where the key is uninstantiated because it doesn't call __key_instantiate_and_link(). Consequently, it doesn't do most of the things that are supposed to happen when the key is instantiated, such as setting the instantiation state, clearing KEY_FLAG_USER_CONSTRUCT and awakening tasks waiting on it, and incrementing key->user->nikeys. It also never takes key_construction_mutex, which means that ->instantiate() can run concurrently with ->update() on the same key. In the case of the "user" and "logon" key types this causes a memory leak, at best. Maybe even worse, the ->update() methods of the "encrypted" and "trusted" key types actually just dereference a NULL pointer when passed an uninstantiated key. Change key_create_or_update() to wait interruptibly for the key to finish construction before continuing. This patch only affects *uninstantiated* keys. For now we still allow a negatively instantiated key to be updated (thereby positively instantiating it), although that's broken too (the next patch fixes it) and I'm not sure that anyone actually uses that functionality either. Here is a simple reproducer for the bug using the "encrypted" key type (requires CONFIG_ENCRYPTED_KEYS=y), though as noted above the bug pertained to more than just the "encrypted" key type: #include <stdlib.h> #include <unistd.h> #include <keyutils.h> int main(void) { int ringid = keyctl_join_session_keyring(NULL); if (fork()) { for (;;) { const char payload[] = "update user:foo 32"; usleep(rand() % 10000); add_key("encrypted", "desc", payload, sizeof(payload), ringid); keyctl_clear(ringid); } } else { for (;;) request_key("encrypted", "desc", "callout_info", ringid); } } It causes: BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 IP: encrypted_update+0xb0/0x170 PGD 7a178067 P4D 7a178067 PUD 77269067 PMD 0 PREEMPT SMP CPU: 0 PID: 340 Comm: reproduce Tainted: G D 4.14.0-rc1-00025-g428490e38b2e #796 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 task: ffff8a467a39a340 task.stack: ffffb15c40770000 RIP: 0010:encrypted_update+0xb0/0x170 RSP: 0018:ffffb15c40773de8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8a467a275b00 RCX: 0000000000000000 RDX: 0000000000000005 RSI: ffff8a467a275b14 RDI: ffffffffb742f303 RBP: ffffb15c40773e20 R08: 0000000000000000 R09: ffff8a467a275b17 R10: 0000000000000020 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: ffff8a4677057180 R15: ffff8a467a275b0f FS: 00007f5d7fb08700(0000) GS:ffff8a467f200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000018 CR3: 0000000077262005 CR4: 00000000001606f0 Call Trace: key_create_or_update+0x2bc/0x460 SyS_add_key+0x10c/0x1d0 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x7f5d7f211259 RSP: 002b:00007ffed03904c8 EFLAGS: 00000246 ORIG_RAX: 00000000000000f8 RAX: ffffffffffffffda RBX: 000000003b2a7955 RCX: 00007f5d7f211259 RDX: 00000000004009e4 RSI: 00000000004009ff RDI: 0000000000400a04 RBP: 0000000068db8bad R08: 000000003b2a7955 R09: 0000000000000004 R10: 000000000000001a R11: 0000000000000246 R12: 0000000000400868 R13: 00007ffed03905d0 R14: 0000000000000000 R15: 0000000000000000 Code: 77 28 e8 64 34 1f 00 45 31 c0 31 c9 48 8d 55 c8 48 89 df 48 8d 75 d0 e8 ff f9 ff ff 85 c0 41 89 c4 0f 88 84 00 00 00 4c 8b 7d c8 <49> 8b 75 18 4c 89 ff e8 24 f8 ff ff 85 c0 41 89 c4 78 6d 49 8b RIP: encrypted_update+0xb0/0x170 RSP: ffffb15c40773de8 CR2: 0000000000000018 Cc: <stable@vger.kernel.org> # v2.6.12+ Reported-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com> cc: Eric Biggers <ebiggers@google.com>
2017-10-18KEYS: Fix race between updating and finding a negative keyDavid Howells12-39/+49
Consolidate KEY_FLAG_INSTANTIATED, KEY_FLAG_NEGATIVE and the rejection error into one field such that: (1) The instantiation state can be modified/read atomically. (2) The error can be accessed atomically with the state. (3) The error isn't stored unioned with the payload pointers. This deals with the problem that the state is spread over three different objects (two bits and a separate variable) and reading or updating them atomically isn't practical, given that not only can uninstantiated keys change into instantiated or rejected keys, but rejected keys can also turn into instantiated keys - and someone accessing the key might not be using any locking. The main side effect of this problem is that what was held in the payload may change, depending on the state. For instance, you might observe the key to be in the rejected state. You then read the cached error, but if the key semaphore wasn't locked, the key might've become instantiated between the two reads - and you might now have something in hand that isn't actually an error code. The state is now KEY_IS_UNINSTANTIATED, KEY_IS_POSITIVE or a negative error code if the key is negatively instantiated. The key_is_instantiated() function is replaced with key_is_positive() to avoid confusion as negative keys are also 'instantiated'. Additionally, barriering is included: (1) Order payload-set before state-set during instantiation. (2) Order state-read before payload-read when using the key. Further separate barriering is necessary if RCU is being used to access the payload content after reading the payload pointers. Fixes: 146aa8b1453b ("KEYS: Merge the type-specific data with the payload data") Cc: stable@vger.kernel.org # v4.4+ Reported-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Eric Biggers <ebiggers@google.com>
2017-10-18security/keys: BIG_KEY requires CONFIG_CRYPTOArnd Bergmann1-0/+1
The recent rework introduced a possible randconfig build failure when CONFIG_CRYPTO configured to only allow modules: security/keys/big_key.o: In function `big_key_crypt': big_key.c:(.text+0x29f): undefined reference to `crypto_aead_setkey' security/keys/big_key.o: In function `big_key_init': big_key.c:(.init.text+0x1a): undefined reference to `crypto_alloc_aead' big_key.c:(.init.text+0x45): undefined reference to `crypto_aead_setauthsize' big_key.c:(.init.text+0x77): undefined reference to `crypto_destroy_tfm' crypto/gcm.o: In function `gcm_hash_crypt_remain_continue': gcm.c:(.text+0x167): undefined reference to `crypto_ahash_finup' crypto/gcm.o: In function `crypto_gcm_exit_tfm': gcm.c:(.text+0x847): undefined reference to `crypto_destroy_tfm' When we 'select CRYPTO' like the other users, we always get a configuration that builds. Fixes: 428490e38b2e ("security/keys: rewrite all of big_key crypto") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David Howells <dhowells@redhat.com>
2017-10-12KEYS: encrypted: fix dereference of NULL user_key_payloadEric Biggers1-0/+7
A key of type "encrypted" references a "master key" which is used to encrypt and decrypt the encrypted key's payload. However, when we accessed the master key's payload, we failed to handle the case where the master key has been revoked, which sets the payload pointer to NULL. Note that request_key() *does* skip revoked keys, but there is still a window where the key can be revoked before we acquire its semaphore. Fix it by checking for a NULL payload, treating it like a key which was already revoked at the time it was requested. This was an issue for master keys of type "user" only. Master keys can also be of type "trusted", but those cannot be revoked. Fixes: 7e70cb497850 ("keys: add new key-type encrypted") Reviewed-by: James Morris <james.l.morris@oracle.com> Cc: <stable@vger.kernel.org> [v2.6.38+] Cc: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: David Safford <safford@us.ibm.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com>
2017-10-10locking/rwsem, security/apparmor: Replace homebrew use of write_can_lock() ↵Will Deacon2-15/+4
with lockdep The lockdep subsystem provides a robust way to assert that a lock is held, so use that instead of write_can_lock, which can give incorrect results for qrwlocks. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: John Johansen <john.johansen@canonical.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: paulmck@linux.vnet.ibm.com Link: http://lkml.kernel.org/r/1507055129-12300-1-git-send-email-will.deacon@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-05timer: Remove expires and data arguments from DEFINE_TIMERKees Cook1-1/+1
Drop the arguments from the macro and adjust all callers with the following script: perl -pi -e 's/DEFINE_TIMER\((.*), 0, 0\);/DEFINE_TIMER($1);/g;' \ $(git grep DEFINE_TIMER | cut -d: -f1 | sort -u | grep -v timer.h) Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # for m68k parts Acked-by: Guenter Roeck <linux@roeck-us.net> # for watchdog parts Acked-by: David S. Miller <davem@davemloft.net> # for networking parts Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Kalle Valo <kvalo@codeaurora.org> # for wireless parts Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: linux-mips@linux-mips.org Cc: Petr Mladek <pmladek@suse.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Lai Jiangshan <jiangshanlai@gmail.com> Cc: Sebastian Reichel <sre@kernel.org> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: linux1394-devel@lists.sourceforge.net Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: linux-s390@vger.kernel.org Cc: linux-wireless@vger.kernel.org Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Ursula Braun <ubraun@linux.vnet.ibm.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Harish Patil <harish.patil@cavium.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Michael Reed <mdr@sgi.com> Cc: Manish Chopra <manish.chopra@cavium.com> Cc: Len Brown <len.brown@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: linux-pm@vger.kernel.org Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Julian Wiedmann <jwi@linux.vnet.ibm.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Mark Gross <mark.gross@intel.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-scsi@vger.kernel.org Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Guenter Roeck <linux@roeck-us.net> Cc: netdev@vger.kernel.org Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linuxppc-dev@lists.ozlabs.org Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Link: https://lkml.kernel.org/r/1507159627-127660-11-git-send-email-keescook@chromium.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-10-04lsm: fix smack_inode_removexattr and xattr_getsecurity memleakCasey Schaufler1-30/+25
security_inode_getsecurity() provides the text string value of a security attribute. It does not provide a "secctx". The code in xattr_getsecurity() that calls security_inode_getsecurity() and then calls security_release_secctx() happened to work because SElinux and Smack treat the attribute and the secctx the same way. It fails for cap_inode_getsecurity(), because that module has no secctx that ever needs releasing. It turns out that Smack is the one that's doing things wrong by not allocating memory when instructed to do so by the "alloc" parameter. The fix is simple enough. Change the security_release_secctx() to kfree() because it isn't a secctx being returned by security_inode_getsecurity(). Change Smack to allocate the string when told to do so. Note: this also fixes memory leaks for LSMs which implement inode_getsecurity but not release_secctx, such as capabilities. Signed-off-by: Casey Schaufler <casey@schaufler-ca.com> Reported-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: stable@vger.kernel.org Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-09-28Merge commit 'keys-fixes-20170927' into fixes-v4.14-rc3James Morris9-152/+137
From David Howells: "There are two sets of patches here: (1) A bunch of core keyrings bug fixes from Eric Biggers. (2) Fixing big_key to use safe crypto from Jason A. Donenfeld."
2017-09-26security/keys: rewrite all of big_key cryptoJason A. Donenfeld2-71/+60
This started out as just replacing the use of crypto/rng with get_random_bytes_wait, so that we wouldn't use bad randomness at boot time. But, upon looking further, it appears that there were even deeper underlying cryptographic problems, and that this seems to have been committed with very little crypto review. So, I rewrote the whole thing, trying to keep to the conventions introduced by the previous author, to fix these cryptographic flaws. It makes no sense to seed crypto/rng at boot time and then keep using it like this, when in fact there's already get_random_bytes_wait, which can ensure there's enough entropy and be a much more standard way of generating keys. Since this sensitive material is being stored untrusted, using ECB and no authentication is simply not okay at all. I find it surprising and a bit horrifying that this code even made it past basic crypto review, which perhaps points to some larger issues. This patch moves from using AES-ECB to using AES-GCM. Since keys are uniquely generated each time, we can set the nonce to zero. There was also a race condition in which the same key would be reused at the same time in different threads. A mutex fixes this issue now. So, to summarize, this commit fixes the following vulnerabilities: * Low entropy key generation, allowing an attacker to potentially guess or predict keys. * Unauthenticated encryption, allowing an attacker to modify the cipher text in particular ways in order to manipulate the plaintext, which is is even more frightening considering the next point. * Use of ECB mode, allowing an attacker to trivially swap blocks or compare identical plaintext blocks. * Key re-use. * Faulty memory zeroing. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by: Eric Biggers <ebiggers3@gmail.com> Signed-off-by: David Howells <dhowells@redhat.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Kirill Marinushkin <k.marinushkin@gmail.com> Cc: security@kernel.org Cc: stable@vger.kernel.org