Age | Commit message (Collapse) | Author | Files | Lines |
|
Integrity file violations - ToM/ToU, open writers - are recorded in the IMA
measurement list, containing 0x00's in both the template data and file data
hash fields, but 0xFF's are actually extended into TPM PCRs. Although the
original 'ima' template data field ('d') is limited to 20 bytes, the 'd-ng'
template digest field is not.
The violation file data hash template field ('d-ng') is unnecessarily hard
coded to SHA1. Instead of simply replacing the hard coded SHA1 hash
algorithm with a larger hash algorithm, use the hash algorithm as defined
in "ima_hash_algo". ima_hash_algo is set to either the Kconfig IMA default
hash algorithm or as defined on the boot command line (ima_hash=).
Including a non-SHA1 file data hash algorithm in the 'd-ng' field of
violations is a cosmetic change. The template data hash field, which is
extended into the TPM PCRs, is not affected by this change and should not
affect attestation of the IMA measurement list.
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
Initially the 'd-ng' template field did not prefix the digest with either
"md5" or "sha1" hash algorithms. Prior to being upstreamed this changed,
but the comments and documentation were not updated. Fix the comments
and documentation.
Fixes: 4d7aeee73f53 ("ima: define new template ima-ng and template fields d-ng and n-ng")
Reported-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
Unfortunately commit 81200b0265b1 ("selinux: checkreqprot is
deprecated, add some ssleep() discomfort") added a five second sleep
during early kernel boot, e.g. start_kernel(), which could cause a
"scheduling while atomic" panic. This patch fixes this problem by
moving the sleep out of checkreqprot_set() and into
sel_write_checkreqprot() so that we only sleep when the checkreqprot
setting is set during runtime, after the kernel has booted. The
error message remains the same in both cases.
Fixes: 81200b0265b1 ("selinux: checkreqprot is deprecated, add some ssleep() discomfort")
Reported-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
The initialization of "security_hook_heads" is done by casting it to
another structure pointer type, and treating it as an array of "struct
hlist_head" objects. This requires an exception be made in "randstruct",
because otherwise it will emit an error, reducing the effectiveness of
the hardening technique.
Instead of using a cast, initialize the individual struct hlist_head
elements in security_hook_heads explicitly. This removes the need for
the cast and randstruct exception.
Signed-off-by: Bill Wendling <morbo@google.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220407175930.471870-1-morbo@google.com
|
|
There isn't enough information to make this a useful check any more;
the useful parts of it were moved in earlier patches, so remove this
set of checks now.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Kees Cook <keescook@chromium.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220110231530.665970-5-willy@infradead.org
|
|
The original 'ima' measurement list template contains a hash, defined
as 20 bytes, and a null terminated pathname, limited to 255
characters. Other measurement list templates permit both larger hashes
and longer pathnames. When the "ima" template is configured as the
default, a new measurement list template (ima_template=) must be
specified before specifying a larger hash algorithm (ima_hash=) on the
boot command line.
To avoid this boot command line ordering issue, remove the legacy "ima"
template configuration option, allowing it to still be specified on the
boot command line.
The root cause of this issue is that during the processing of ima_hash,
we would try to check whether the hash algorithm is compatible with the
template. If the template is not set at the moment we do the check, we
check the algorithm against the configured default template. If the
default template is "ima", then we reject any hash algorithm other than
sha1 and md5.
For example, if the compiled default template is "ima", and the default
algorithm is sha1 (which is the current default). In the cmdline, we put
in "ima_hash=sha256 ima_template=ima-ng". The expected behavior would be
that ima starts with ima-ng as the template and sha256 as the hash
algorithm. However, during the processing of "ima_hash=",
"ima_template=" has not been processed yet, and hash_setup would check
the configured hash algorithm against the compiled default: ima, and
reject sha256. So at the end, the hash algorithm that is actually used
will be sha1.
With template "ima" removed from the configured default, we ensure that
the default tempalte would at least be "ima-ng" which allows for
basically any hash algorithm.
This change would not break the algorithm compatibility checks for IMA.
Fixes: 4286587dccd43 ("ima: add Kconfig default measurement list template")
Signed-off-by: GUO Zihua <guozihua@huawei.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
Replace the PTR_EQ NULL checks with the more idiomatic and specific NULL
macros.
Acked-by: Daniel Latypov <dlatypov@google.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Acked-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The pointer 'file' is being initialized with a value that is never read,
it is being re-assigned the same value later on closer to where it is
being first used. The initialization is redundant and can be removed.
Cleans up clang scan build warning:
security/integrity/ima/ima_main.c:434:15: warning: Value stored to 'file'
during its initialization is never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
The checkreqprot functionality was disabled by default back in
Linux v4.4 (2015) with commit 2a35d196c160e3 ("selinux: change
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE default") and it was
officially marked as deprecated in Linux v5.7. It was always a
bit of a hack to workaround very old userspace and to the best of
our knowledge, the checkreqprot functionality has been disabled by
Linux distributions for quite some time.
This patch moves the deprecation messages from KERN_WARNING to
KERN_ERR and adds a five second sleep to anyone using it to help
draw their attention to the deprecation and provide a URL which
helps explain things in more detail.
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
We deprecated the SELinux runtime disable functionality in Linux
v5.6, and it is time to get a bit more serious about removing it.
Add a five second sleep to anyone using it to help draw their
attention to the deprecation and provide a URL which helps explain
things in more detail, including how to add kernel command line
parameters to some of the more popular Linux distributions.
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Get rid of redundant assignments which end up in values not being
read either because they are overwritten or the function ends.
Reported by clang-tidy [deadcode.DeadStores]
Signed-off-by: Michal Orzel <michalorzel.eng@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"This addresses an -Warray-bounds warning found under a few ARM
defconfigs, and disables long-broken HARDENED_USERCOPY_PAGESPAN"
* tag 'hardening-v5.18-rc1-fix1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
ARM/dma-mapping: Remove CMA code when not built with CMA
usercopy: Disable CONFIG_HARDENED_USERCOPY_PAGESPAN
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull ptrace cleanups from Eric Biederman:
"This set of changes removes tracehook.h, moves modification of all of
the ptrace fields inside of siglock to remove races, adds a missing
permission check to ptrace.c
The removal of tracehook.h is quite significant as it has been a major
source of confusion in recent years. Much of that confusion was around
task_work and TIF_NOTIFY_SIGNAL (which I have now decoupled making the
semantics clearer).
For people who don't know tracehook.h is a vestiage of an attempt to
implement uprobes like functionality that was never fully merged, and
was later superseeded by uprobes when uprobes was merged. For many
years now we have been removing what tracehook functionaly a little
bit at a time. To the point where anything left in tracehook.h was
some weird strange thing that was difficult to understand"
* tag 'ptrace-cleanups-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
ptrace: Remove duplicated include in ptrace.c
ptrace: Check PTRACE_O_SUSPEND_SECCOMP permission on PTRACE_SEIZE
ptrace: Return the signal to continue with from ptrace_stop
ptrace: Move setting/clearing ptrace_message into ptrace_stop
tracehook: Remove tracehook.h
resume_user_mode: Move to resume_user_mode.h
resume_user_mode: Remove #ifdef TIF_NOTIFY_RESUME in set_notify_resume
signal: Move set_notify_signal and clear_notify_signal into sched/signal.h
task_work: Decouple TIF_NOTIFY_SIGNAL and task_work
task_work: Call tracehook_notify_signal from get_signal on all architectures
task_work: Introduce task_work_pending
task_work: Remove unnecessary include from posix_timers.h
ptrace: Remove tracehook_signal_handler
ptrace: Remove arch_syscall_{enter,exit}_tracehook
ptrace: Create ptrace_report_syscall_{entry,exit} in ptrace.h
ptrace/arm: Rename tracehook_report_syscall report_syscall
ptrace: Move ptrace_report_syscall into ptrace.h
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock updates from Mickaël Salaün:
"These two commits contain a minor fix for the sandboxer sample, and a
Landlock ruleset FD name standardization"
* tag 'landlock-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
landlock: Use square brackets around "landlock-ruleset"
samples/landlock: Fix path_list memory leak
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull FORTIFY_SOURCE updates from Kees Cook:
"This series consists of two halves:
- strict compile-time buffer size checking under FORTIFY_SOURCE for
the memcpy()-family of functions (for extensive details and
rationale, see the first commit)
- enabling FORTIFY_SOURCE for Clang, which has had many overlapping
bugs that we've finally worked past"
* tag 'memcpy-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
fortify: Add Clang support
fortify: Make sure strlen() may still be used as a constant expression
fortify: Use __diagnose_as() for better diagnostic coverage
fortify: Make pointer arguments const
Compiler Attributes: Add __diagnose_as for Clang
Compiler Attributes: Add __overloadable for Clang
Compiler Attributes: Add __pass_object_size for Clang
fortify: Replace open-coded __gnu_inline attribute
fortify: Update compile-time tests for Clang 14
fortify: Detect struct member overflows in memset() at compile-time
fortify: Detect struct member overflows in memmove() at compile-time
fortify: Detect struct member overflows in memcpy() at compile-time
|
|
Pull drm updates from Dave Airlie:
"Lots of work all over, Intel improving DG2 support, amdkfd CRIU
support, msm new hw support, and faster fbdev support.
dma-buf:
- rename dma-buf-map to iosys-map
core:
- move buddy allocator to core
- add pci/platform init macros
- improve EDID parser deep color handling
- EDID timing type 7 support
- add GPD Win Max quirk
- add yes/no helpers to string_helpers
- flatten syncobj chains
- add nomodeset support to lots of drivers
- improve fb-helper clipping support
- add default property value interface
fbdev:
- improve fbdev ops speed
ttm:
- add a backpointer from ttm bo->ttm resource
dp:
- move displayport headers
- add a dp helper module
bridge:
- anx7625 atomic support, HDCP support
panel:
- split out panel-lvds and lvds bindings
- find panels in OF subnodes
privacy:
- add chromeos privacy screen support
fb:
- hot unplug fw fb on forced removal
simpledrm:
- request region instead of marking ioresource busy
- add panel oreintation property
udmabuf:
- fix oops with 0 pages
amdgpu:
- power management code cleanup
- Enable freesync video mode by default
- RAS code cleanup
- Improve VRAM access for debug using SDMA
- SR-IOV rework special register access and fixes
- profiling power state request ioctl
- expose IP discovery via sysfs
- Cyan skillfish updates
- GC 10.3.7, SDMA 5.2.7, DCN 3.1.6 updates
- expose benchmark tests via debugfs
- add module param to disable XGMI for testing
- GPU reset debugfs register dumping support
amdkfd:
- CRIU support
- SDMA queue fixes
radeon:
- UVD suspend fix
- iMac backlight fix
i915:
- minimal parallel submission for execlists
- DG2-G12 subplatform added
- DG2 programming workarounds
- DG2 accelerated migration support
- flat CCS and CCS engine support for XeHP
- initial small BAR support
- drop fake LMEM support
- ADL-N PCH support
- bigjoiner updates
- introduce VMA resources and async unbinding
- register definitions cleanups
- multi-FBC refactoring
- DG1 OPROM over SPI support
- ADL-N platform enabling
- opregion mailbox #5 support
- DP MST ESI improvements
- drm device based logging
- async flip optimisation for DG2
- CPU arch abstraction fixes
- improve GuC ADS init to work on aarch64
- tweak TTM LRU priority hint
- GuC 69.0.3 support
- remove short term execbuf pins
nouveau:
- higher DP/eDP bitrates
- backlight fixes
msm:
- dpu + dp support for sc8180x
- dp support for sm8350
- dpu + dsi support for qcm2290
- 10nm dsi phy tuning support
- bridge support for dp encoder
- gpu support for additional 7c3 SKUs
ingenic:
- HDMI support for JZ4780
- aux channel EDID support
ast:
- AST2600 support
- add wide screen support
- create DP/DVI connectors
omapdrm:
- fix implicit dma_buf fencing
vc4:
- add CSC + full range support
- better display firmware handoff
panfrost:
- add initial dual-core GPU support
stm:
- new revision support
- fb handover support
mediatek:
- transfer display binding document to yaml format.
- add mt8195 display device binding.
- allow commands to be sent during video mode.
- add wait_for_event for crtc disable by cmdq.
tegra:
- YUV format support
rcar-du:
- LVDS support for M3-W+ (R8A77961)
exynos:
- BGR pixel format for FIMD device"
* tag 'drm-next-2022-03-24' of git://anongit.freedesktop.org/drm/drm: (1529 commits)
drm/i915/display: Do not re-enable PSR after it was marked as not reliable
drm/i915/display: Fix HPD short pulse handling for eDP
drm/amdgpu: Use drm_mode_copy()
drm/radeon: Use drm_mode_copy()
drm/amdgpu: Use ternary operator in `vcn_v1_0_start()`
drm/amdgpu: Remove pointless on stack mode copies
drm/amd/pm: fix indenting in __smu_cmn_reg_print_error()
drm/amdgpu/dc: fix typos in comments
drm/amdgpu: fix typos in comments
drm/amd/pm: fix typos in comments
drm/amdgpu: Add stolen reserved memory for MI25 SRIOV.
drm/amdgpu: Merge get_reserved_allocation to get_vbios_allocations.
drm/amdkfd: evict svm bo worker handle error
drm/amdgpu/vcn: fix vcn ring test failure in igt reload test
drm/amdgpu: only allow secure submission on rings which support that
drm/amdgpu: fixed the warnings reported by kernel test robot
drm/amd/display: 3.2.177
drm/amd/display: [FW Promotion] Release 0.0.108.0
drm/amd/display: Add save/restore PANEL_PWRSEQ_REF_DIV2
drm/amd/display: Wait for hubp read line for Pollock
...
|
|
CONFIG_HARDENED_USERCOPY_PAGESPAN has been mostly broken for a while,
and it has become hard to ignore with some recent scsi changes[1].
While there is a more complete series to replace it with better checks[2],
it should have more soak time in -next. Instead, disable the config now,
with the expectation that it will be fully replaced in the next kernel
release.
[1] https://lore.kernel.org/lkml/20220324064846.GA12961@lst.de/
[2] https://lore.kernel.org/linux-hardening/20220110231530.665970-1-willy@infradead.org/
Suggested-by: Christoph Hellwig <hch@lst.de>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"The sprinkling of SPI drivers is because we added a new one and Mark
sent us a SPI driver interface conversion pull request.
Core
----
- Introduce XDP multi-buffer support, allowing the use of XDP with
jumbo frame MTUs and combination with Rx coalescing offloads (LRO).
- Speed up netns dismantling (5x) and lower the memory cost a little.
Remove unnecessary per-netns sockets. Scope some lists to a netns.
Cut down RCU syncing. Use batch methods. Allow netdev registration
to complete out of order.
- Support distinguishing timestamp types (ingress vs egress) and
maintaining them across packet scrubbing points (e.g. redirect).
- Continue the work of annotating packet drop reasons throughout the
stack.
- Switch netdev error counters from an atomic to dynamically
allocated per-CPU counters.
- Rework a few preempt_disable(), local_irq_save() and busy waiting
sections problematic on PREEMPT_RT.
- Extend the ref_tracker to allow catching use-after-free bugs.
BPF
---
- Introduce "packing allocator" for BPF JIT images. JITed code is
marked read only, and used to be allocated at page granularity.
Custom allocator allows for more efficient memory use, lower iTLB
pressure and prevents identity mapping huge pages from getting
split.
- Make use of BTF type annotations (e.g. __user, __percpu) to enforce
the correct probe read access method, add appropriate helpers.
- Convert the BPF preload to use light skeleton and drop the
user-mode-driver dependency.
- Allow XDP BPF_PROG_RUN test infra to send real packets, enabling
its use as a packet generator.
- Allow local storage memory to be allocated with GFP_KERNEL if
called from a hook allowed to sleep.
- Introduce fprobe (multi kprobe) to speed up mass attachment (arch
bits to come later).
- Add unstable conntrack lookup helpers for BPF by using the BPF
kfunc infra.
- Allow cgroup BPF progs to return custom errors to user space.
- Add support for AF_UNIX iterator batching.
- Allow iterator programs to use sleepable helpers.
- Support JIT of add, and, or, xor and xchg atomic ops on arm64.
- Add BTFGen support to bpftool which allows to use CO-RE in kernels
without BTF info.
- Large number of libbpf API improvements, cleanups and deprecations.
Protocols
---------
- Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev.
- Adjust TSO packet sizes based on min_rtt, allowing very low latency
links (data centers) to always send full-sized TSO super-frames.
- Make IPv6 flow label changes (AKA hash rethink) more configurable,
via sysctl and setsockopt. Distinguish between server and client
behavior.
- VxLAN support to "collect metadata" devices to terminate only
configured VNIs. This is similar to VLAN filtering in the bridge.
- Support inserting IPv6 IOAM information to a fraction of frames.
- Add protocol attribute to IP addresses to allow identifying where
given address comes from (kernel-generated, DHCP etc.)
- Support setting socket and IPv6 options via cmsg on ping6 sockets.
- Reject mis-use of ECN bits in IP headers as part of DSCP/TOS.
Define dscp_t and stop taking ECN bits into account in fib-rules.
- Add support for locked bridge ports (for 802.1X).
- tun: support NAPI for packets received from batched XDP buffs,
doubling the performance in some scenarios.
- IPv6 extension header handling in Open vSwitch.
- Support IPv6 control message load balancing in bonding, prevent
neighbor solicitation and advertisement from using the wrong port.
Support NS/NA monitor selection similar to existing ARP monitor.
- SMC
- improve performance with TCP_CORK and sendfile()
- support auto-corking
- support TCP_NODELAY
- MCTP (Management Component Transport Protocol)
- add user space tag control interface
- I2C binding driver (as specified by DMTF DSP0237)
- Multi-BSSID beacon handling in AP mode for WiFi.
- Bluetooth:
- handle MSFT Monitor Device Event
- add MGMT Adv Monitor Device Found/Lost events
- Multi-Path TCP:
- add support for the SO_SNDTIMEO socket option
- lots of selftest cleanups and improvements
- Increase the max PDU size in CAN ISOTP to 64 kB.
Driver API
----------
- Add HW counters for SW netdevs, a mechanism for devices which
offload packet forwarding to report packet statistics back to
software interfaces such as tunnels.
- Select the default NIC queue count as a fraction of number of
physical CPU cores, instead of hard-coding to 8.
- Expose devlink instance locks to drivers. Allow device layer of
drivers to use that lock directly instead of creating their own
which always runs into ordering issues in devlink callbacks.
- Add header/data split indication to guide user space enabling of
TCP zero-copy Rx.
- Allow configuring completion queue event size.
- Refactor page_pool to enable fragmenting after allocation.
- Add allocation and page reuse statistics to page_pool.
- Improve Multiple Spanning Trees support in the bridge to allow
reuse of topologies across VLANs, saving HW resources in switches.
- DSA (Distributed Switch Architecture):
- replay and offload of host VLAN entries
- offload of static and local FDB entries on LAG interfaces
- FDB isolation and unicast filtering
New hardware / drivers
----------------------
- Ethernet:
- LAN937x T1 PHYs
- Davicom DM9051 SPI NIC driver
- Realtek RTL8367S, RTL8367RB-VB switch and MDIO
- Microchip ksz8563 switches
- Netronome NFP3800 SmartNICs
- Fungible SmartNICs
- MediaTek MT8195 switches
- WiFi:
- mt76: MediaTek mt7916
- mt76: MediaTek mt7921u USB adapters
- brcmfmac: Broadcom BCM43454/6
- Mobile:
- iosm: Intel M.2 7360 WWAN card
Drivers
-------
- Convert many drivers to the new phylink API built for split PCS
designs but also simplifying other cases.
- Intel Ethernet NICs:
- add TTY for GNSS module for E810T device
- improve AF_XDP performance
- GTP-C and GTP-U filter offload
- QinQ VLAN support
- Mellanox Ethernet NICs (mlx5):
- support xdp->data_meta
- multi-buffer XDP
- offload tc push_eth and pop_eth actions
- Netronome Ethernet NICs (nfp):
- flow-independent tc action hardware offload (police / meter)
- AF_XDP
- Other Ethernet NICs:
- at803x: fiber and SFP support
- xgmac: mdio: preamble suppression and custom MDC frequencies
- r8169: enable ASPM L1.2 if system vendor flags it as safe
- macb/gem: ZynqMP SGMII
- hns3: add TX push mode
- dpaa2-eth: software TSO
- lan743x: multi-queue, mdio, SGMII, PTP
- axienet: NAPI and GRO support
- Mellanox Ethernet switches (mlxsw):
- source and dest IP address rewrites
- RJ45 ports
- Marvell Ethernet switches (prestera):
- basic routing offload
- multi-chain TC ACL offload
- NXP embedded Ethernet switches (ocelot & felix):
- PTP over UDP with the ocelot-8021q DSA tagging protocol
- basic QoS classification on Felix DSA switch using dcbnl
- port mirroring for ocelot switches
- Microchip high-speed industrial Ethernet (sparx5):
- offloading of bridge port flooding flags
- PTP Hardware Clock
- Other embedded switches:
- lan966x: PTP Hardward Clock
- qca8k: mdio read/write operations via crafted Ethernet packets
- Qualcomm 802.11ax WiFi (ath11k):
- add LDPC FEC type and 802.11ax High Efficiency data in radiotap
- enable RX PPDU stats in monitor co-exist mode
- Intel WiFi (iwlwifi):
- UHB TAS enablement via BIOS
- band disablement via BIOS
- channel switch offload
- 32 Rx AMPDU sessions in newer devices
- MediaTek WiFi (mt76):
- background radar detection
- thermal management improvements on mt7915
- SAR support for more mt76 platforms
- MBSSID and 6 GHz band on mt7915
- RealTek WiFi:
- rtw89: AP mode
- rtw89: 160 MHz channels and 6 GHz band
- rtw89: hardware scan
- Bluetooth:
- mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS)
- Microchip CAN (mcp251xfd):
- multiple RX-FIFOs and runtime configurable RX/TX rings
- internal PLL, runtime PM handling simplification
- improve chip detection and error handling after wakeup"
* tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2521 commits)
llc: fix netdevice reference leaks in llc_ui_bind()
drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool
ice: don't allow to run ice_send_event_to_aux() in atomic ctx
ice: fix 'scheduling while atomic' on aux critical err interrupt
net/sched: fix incorrect vlan_push_eth dest field
net: bridge: mst: Restrict info size queries to bridge ports
net: marvell: prestera: add missing destroy_workqueue() in prestera_module_init()
drivers: net: xgene: Fix regression in CRC stripping
net: geneve: add missing netlink policy and size for IFLA_GENEVE_INNER_PROTO_INHERIT
net: dsa: fix missing host-filtered multicast addresses
net/mlx5e: Fix build warning, detected write beyond size of field
iwlwifi: mvm: Don't fail if PPAG isn't supported
selftests/bpf: Fix kprobe_multi test.
Revert "rethook: x86: Add rethook x86 implementation"
Revert "arm64: rethook: Add arm64 rethook implementation"
Revert "powerpc: Add rethook support"
Revert "ARM: rethook: Add rethook arm implementation"
netdevice: add missing dm_private kdoc
net: bridge: mst: prevent NULL deref in br_mst_info_size()
selftests: forwarding: Use same VRF for port and VLAN upper
...
|
|
Pull tomoyo update from Tetsuo Handa:
"Avoid unnecessarily leaking kernel command line arguments"
* tag 'tomoyo-pr-20220322' of git://git.osdn.net/gitroot/tomoyo/tomoyo-test1:
TOMOYO: fix __setup handlers return values
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM driver updates from Arnd Bergmann:
"There are a few separately maintained driver subsystems that we merge
through the SoC tree, notable changes are:
- Memory controller updates, mainly for Tegra and Mediatek SoCs, and
clarifications for the memory controller DT bindings
- SCMI firmware interface updates, in particular a new transport
based on OPTEE and support for atomic operations.
- Cleanups to the TEE subsystem, refactoring its memory management
For SoC specific drivers without a separate subsystem, changes include
- Smaller updates and fixes for TI, AT91/SAMA5, Qualcomm and NXP
Layerscape SoCs.
- Driver support for Microchip SAMA5D29, Tesla FSD, Renesas RZ/G2L,
and Qualcomm SM8450.
- Better power management on Mediatek MT81xx, NXP i.MX8MQ and older
NVIDIA Tegra chips"
* tag 'arm-drivers-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (154 commits)
ARM: spear: fix typos in comments
soc/microchip: fix invalid free in mpfs_sys_controller_delete
soc: s4: Add support for power domains controller
dt-bindings: power: add Amlogic s4 power domains bindings
ARM: at91: add support in soc driver for new SAMA5D29
soc: mediatek: mmsys: add sw0_rst_offset in mmsys driver data
dt-bindings: memory: renesas,rpc-if: Document RZ/V2L SoC
memory: emif: check the pointer temp in get_device_details()
memory: emif: Add check for setup_interrupts
dt-bindings: arm: mediatek: mmsys: add support for MT8186
dt-bindings: mediatek: add compatible for MT8186 pwrap
soc: mediatek: pwrap: add pwrap driver for MT8186 SoC
soc: mediatek: mmsys: add mmsys reset control for MT8186
soc: mediatek: mtk-infracfg: Disable ACP on MT8192
soc: ti: k3-socinfo: Add AM62x JTAG ID
soc: mediatek: add MTK mutex support for MT8186
soc: mediatek: mmsys: add mt8186 mmsys routing table
soc: mediatek: pm-domains: Add support for mt8186
dt-bindings: power: Add MT8186 power domains
soc: mediatek: pm-domains: Add support for mt8195
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore:
"We've got a number of SELinux patches queued up, the highlights are:
- Fixup the security_fs_context_parse_param() LSM hook so it executes
all of the LSM hook implementations unless a serious error occurs.
We also correct the SELinux hook implementation so that it returns
zero on success.
- In addition to a few SELinux mount option parsing fixes, we
simplified the parsing by moving it earlier in the process.
The logic was that it was unlikely an admin/user would use the new
mount API and not have the policy loaded before passing the SELinux
options.
- Properly fixed the LSM/SELinux/SCTP hooks with the addition of the
security_sctp_assoc_established() hook.
This work was done in conjunction with the netdev folks and should
complete the move of the SCTP labeling from the endpoints to the
associations.
- Fixed a variety of sparse warnings caused by changes in the "__rcu"
markings of some core kernel structures.
- Ensure we access the superblock's LSM security blob using the
stacking-safe accessors.
- Added the ability for the kernel to always allow FIOCLEX and
FIONCLEX if the "ioctl_skip_cloexec" policy capability is
specified.
- Various constifications improvements, type casting improvements,
additional return value checks, and dead code/parameter removal.
- Documentation fixes"
* tag 'selinux-pr-20220321' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: (23 commits)
selinux: shorten the policy capability enum names
docs: fix 'make htmldocs' warning in SCTP.rst
selinux: allow FIOCLEX and FIONCLEX with policy capability
selinux: use correct type for context length
selinux: drop return statement at end of void functions
security: implement sctp_assoc_established hook in selinux
security: add sctp_assoc_established hook
selinux: parse contexts for mount options early
selinux: various sparse fixes
selinux: try to use preparsed sid before calling parse_sid()
selinux: Fix selinux_sb_mnt_opts_compat()
LSM: general protection fault in legacy_parse_param
selinux: fix a type cast problem in cred_init_security()
selinux: drop unused macro
selinux: simplify cred_init_security
selinux: do not discard const qualifier in cast
selinux: drop unused parameter of avtab_insert_node
selinux: drop cast to same type
selinux: enclose macro arguments in parenthesis
selinux: declare name parameter of hash_eval const
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity subsystem updates from Mimi Zohar:
"Except for extending the 'encrypted' key type to support user provided
data, the rest is code cleanup, __setup() usage bug fix, and a trivial
change"
* tag 'integrity-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
MAINTAINERS: add missing security/integrity/platform_certs
EVM: fix the evm= __setup handler return value
KEYS: encrypted: Instantiate key with user-provided decrypted data
ima: define ima_max_digest_data struct without a flexible array variable
ima: rename IMA_ACTION_FLAGS to IMA_NONACTION_FLAGS
ima: Return error code obtained from securityfs functions
MAINTAINERS: add missing "security/integrity" directory
ima: Fix trivial typos in the comments
|
|
Pull smack update from Casey Schaufler:
"A single fix to repair an incorrect use of ntohs() in IPv6 audit code.
It's very minor and went unnoticed until lkp found it.
It's been in next and passes all tests"
* tag 'Smack-for-5.18' of https://github.com/cschaufler/smack-next:
Fix incorrect type in assignment of ipv6 port for audit
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull kernel hardening updates from Kees Cook:
- Add arm64 Shadow Call Stack support for GCC 12 (Dan Li)
- Avoid memset with stack offset randomization under Clang (Marco
Elver)
- Clean up stackleak plugin to play nice with .noinstr (Kees Cook)
- Check stack depth for greater usercopy hardening coverage (Kees Cook)
* tag 'hardening-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
arm64: Add gcc Shadow Call Stack support
m68k: Implement "current_stack_pointer"
xtensa: Implement "current_stack_pointer"
usercopy: Check valid lifetime via stack depth
stack: Constrain and fix stack offset randomization with Clang builds
stack: Introduce CONFIG_RANDOMIZE_KSTACK_OFFSET
gcc-plugins/stackleak: Ignore .noinstr.text and .entry.text
gcc-plugins/stackleak: Exactly match strings instead of prefixes
gcc-plugins/stackleak: Provide verbose mode
|
|
Pull block updates from Jens Axboe:
- BFQ cleanups and fixes (Yu, Zhang, Yahu, Paolo)
- blk-rq-qos completion fix (Tejun)
- blk-cgroup merge fix (Tejun)
- Add offline error return value to distinguish it from an IO error on
the device (Song)
- IO stats fixes (Zhang, Christoph)
- blkcg refcount fixes (Ming, Yu)
- Fix for indefinite dispatch loop softlockup (Shin'ichiro)
- blk-mq hardware queue management improvements (Ming)
- sbitmap dead code removal (Ming, John)
- Plugging merge improvements (me)
- Show blk-crypto capabilities in sysfs (Eric)
- Multiple delayed queue run improvement (David)
- Block throttling fixes (Ming)
- Start deprecating auto module loading based on dev_t (Christoph)
- bio allocation improvements (Christoph, Chaitanya)
- Get rid of bio_devname (Christoph)
- bio clone improvements (Christoph)
- Block plugging improvements (Christoph)
- Get rid of genhd.h header (Christoph)
- Ensure drivers use appropriate flush helpers (Christoph)
- Refcounting improvements (Christoph)
- Queue initialization and teardown improvements (Ming, Christoph)
- Misc fixes/improvements (Barry, Chaitanya, Colin, Dan, Jiapeng,
Lukas, Nian, Yang, Eric, Chengming)
* tag 'for-5.18/block-2022-03-18' of git://git.kernel.dk/linux-block: (127 commits)
block: cancel all throttled bios in del_gendisk()
block: let blkcg_gq grab request queue's refcnt
block: avoid use-after-free on throttle data
block: limit request dispatch loop duration
block/bfq-iosched: Fix spelling mistake "tenative" -> "tentative"
sr: simplify the local variable initialization in sr_block_open()
block: don't merge across cgroup boundaries if blkcg is enabled
block: fix rq-qos breakage from skipping rq_qos_done_bio()
block: flush plug based on hardware and software queue order
block: ensure plug merging checks the correct queue at least once
block: move rq_qos_exit() into disk_release()
block: do more work in elevator_exit
block: move blk_exit_queue into disk_release
block: move q_usage_counter release into blk_queue_release
block: don't remove hctx debugfs dir from blk_mq_exit_queue
block: move blkcg initialization/destroy into disk allocation/release handler
sr: implement ->free_disk to simplify refcounting
sd: implement ->free_disk to simplify refcounting
sd: delay calling free_opal_dev
sd: call sd_zbc_release_disk before releasing the scsi_device reference
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- hwrng core now credits for low-quality RNG devices.
Algorithms:
- Optimisations for neon aes on arm/arm64.
- Add accelerated crc32_be on arm64.
- Add ffdheXYZ(dh) templates.
- Disallow hmac keys < 112 bits in FIPS mode.
- Add AVX assembly implementation for sm3 on x86.
Drivers:
- Add missing local_bh_disable calls for crypto_engine callback.
- Ensure BH is disabled in crypto_engine callback path.
- Fix zero length DMA mappings in ccree.
- Add synchronization between mailbox accesses in octeontx2.
- Add Xilinx SHA3 driver.
- Add support for the TDES IP available on sama7g5 SoC in atmel"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (137 commits)
crypto: xilinx - Turn SHA into a tristate and allow COMPILE_TEST
MAINTAINERS: update HPRE/SEC2/TRNG driver maintainers list
crypto: dh - Remove the unused function dh_safe_prime_dh_alg()
hwrng: nomadik - Change clk_disable to clk_disable_unprepare
crypto: arm64 - cleanup comments
crypto: qat - fix initialization of pfvf rts_map_msg structures
crypto: qat - fix initialization of pfvf cap_msg structures
crypto: qat - remove unneeded assignment
crypto: qat - disable registration of algorithms
crypto: hisilicon/qm - fix memset during queues clearing
crypto: xilinx: prevent probing on non-xilinx hardware
crypto: marvell/octeontx - Use swap() instead of open coding it
crypto: ccree - Fix use after free in cc_cipher_exit()
crypto: ccp - ccp_dmaengine_unregister release dma channels
crypto: octeontx2 - fix missing unlock
hwrng: cavium - fix NULL but dereferenced coccicheck error
crypto: cavium/nitrox - don't cast parameter in bit operations
crypto: vmx - add missing dependencies
MAINTAINERS: Add maintainer for Xilinx ZynqMP SHA3 driver
crypto: xilinx - Add Xilinx SHA3 driver
...
|
|
__ima_inode_hash() checks if a digest has been already calculated by
looking for the integrity_iint_cache structure associated to the passed
inode.
Users of ima_file_hash() (e.g. eBPF) might be interested in obtaining the
information without having to setup an IMA policy so that the digest is
always available at the time they call this function.
In addition, they likely expect the digest to be fresh, e.g. recalculated
by IMA after a file write. Although getting the digest from the
bprm_committed_creds hook (as in the eBPF test) ensures that the digest is
fresh, as the IMA hook is executed before that hook, this is not always the
case (e.g. for the mmap_file hook).
Call ima_collect_measurement() in __ima_inode_hash(), if the file
descriptor is available (passed by ima_file_hash()) and the digest is not
available/not fresh, and store the file measurement in a temporary
integrity_iint_cache structure.
This change does not cause memory usage increase, due to using the
temporary integrity_iint_cache structure, and due to freeing the
ima_digest_data structure inside integrity_iint_cache before exiting from
__ima_inode_hash().
For compatibility reasons, the behavior of ima_inode_hash() remains
unchanged.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Link: https://lore.kernel.org/bpf/20220302111404.193900-3-roberto.sassu@huawei.com
|
|
Fix the following warnings in ima_main.c, displayed with W=n make argument:
security/integrity/ima/ima_main.c:432: warning: Function parameter or
member 'vma' not described in 'ima_file_mprotect'
security/integrity/ima/ima_main.c:636: warning: Function parameter or
member 'inode' not described in 'ima_post_create_tmpfile'
security/integrity/ima/ima_main.c:636: warning: Excess function parameter
'file' description in 'ima_post_create_tmpfile'
security/integrity/ima/ima_main.c:843: warning: Function parameter or
member 'load_id' not described in 'ima_post_load_data'
security/integrity/ima/ima_main.c:843: warning: Excess function parameter
'id' description in 'ima_post_load_data'
Also, fix some style issues in the description of ima_post_create_tmpfile()
and ima_post_path_mknod().
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Link: https://lore.kernel.org/bpf/20220302111404.193900-2-roberto.sassu@huawei.com
|
|
Now that all of the definitions have moved out of tracehook.h into
ptrace.h, sched/signal.h, resume_user_mode.h there is nothing left in
tracehook.h so remove it.
Update the few files that were depending upon tracehook.h to bring in
definitions to use the headers they need directly.
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20220309162454.123006-13-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
With the introduction of uefi_check_trust_mok_keys, it signifies the end-
user wants to trust the machine keyring as trusted keys. If they have
chosen to trust the machine keyring, load the qualifying keys into it
during boot, then link it to the secondary keyring . If the user has not
chosen to trust the machine keyring, it will be empty and not linked to
the secondary keyring.
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
A new Machine Owner Key (MOK) variable called MokListTrustedRT has been
introduced in shim. When this UEFI variable is set, it indicates the
end-user has made the decision themselves that they wish to trust MOK keys
within the Linux trust boundary. It is not an error if this variable
does not exist. If it does not exist, the MOK keys should not be trusted
within the kernel.
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Expose the .machine keyring created in integrity code by adding
a reference. Store a reference to the machine keyring in
system keyring code. The system keyring code needs this to complete
the keyring link to the machine keyring.
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Currently both Secure Boot DB and Machine Owner Keys (MOK) go through
the same keyring handler (get_handler_for_db). With the addition of the
new machine keyring, the end-user may choose to trust MOK keys.
Introduce a new keyring handler specific for MOK keys. If MOK keys are
trusted by the end-user, use the new keyring handler instead.
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Many UEFI Linux distributions boot using shim. The UEFI shim provides
what is called Machine Owner Keys (MOK). Shim uses both the UEFI Secure
Boot DB and MOK keys to validate the next step in the boot chain. The
MOK facility can be used to import user generated keys. These keys can
be used to sign an end-users development kernel build. When Linux
boots, both UEFI Secure Boot DB and MOK keys get loaded in the Linux
.platform keyring.
Define a new Linux keyring called machine. This keyring shall contain just
MOK keys and not the remaining keys in the platform keyring. This new
machine keyring will be used in follow on patches. Unlike keys in the
platform keyring, keys contained in the machine keyring will be trusted
within the kernel if the end-user has chosen to do so.
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
make W=1 generates the following warning in keyring_handler.c
security/integrity/platform_certs/keyring_handler.c:71:30: warning: no previous prototype for get_handler_for_db [-Wmissing-prototypes]
__init efi_element_handler_t get_handler_for_db(const efi_guid_t *sig_type)
^~~~~~~~~~~~~~~~~~
security/integrity/platform_certs/keyring_handler.c:82:30: warning: no previous prototype for get_handler_for_dbx [-Wmissing-prototypes]
__init efi_element_handler_t get_handler_for_dbx(const efi_guid_t *sig_type)
^~~~~~~~~~~~~~~~~~~
Add the missing prototypes by including keyring_handler.h.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
If one loads and unloads the trusted module, trusted_key_exit can be
NULL. Call it through static_call_cond() to avoid a kernel trap.
Fixes: 5d0682be3189 ("KEYS: trusted: Add generic trusted keys framework")
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Cc: Sumit Garg <sumit.garg@linaro.org>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Mimi Zohar <zohar@linux.ibm.com>
Cc: David Howells <dhowells@redhat.com>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: linux-integrity@vger.kernel.org
Cc: keyrings@vger.kernel.org
Cc: linux-security-module@vger.kernel.org
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Before this commit the kernel could end up with no trusted key sources
even though both of the currently supported backends (TPM and TEE) were
compiled as modules. This manifested in the trusted key type not being
registered at all.
When checking if a CONFIG_… preprocessor variable is defined we only
test for the builtin (=y) case and not the module (=m) case. By using
the IS_REACHABLE() macro we do test for both cases.
Fixes: 5d0682be3189 ("KEYS: trusted: Add generic trusted keys framework")
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Andreas Rammhold <andreas@rammhold.de>
Tested-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
In many cases, keyctl_pkey_params_get_2() is validating the user buffer
lengths against the wrong algorithm properties. Fix it to check against
the correct properties.
Probably this wasn't noticed before because for all asymmetric keys of
the "public_key" subtype, max_data_size == max_sig_size == max_enc_size
== max_dec_size. However, this isn't necessarily true for the
"asym_tpm" subtype (it should be, but it's not strictly validated). Of
course, future key types could have different values as well.
Fixes: 00d60fd3b932 ("KEYS: Provide keyctls to drive the new key type ops for asymmetric keys [ver #2]")
Cc: <stable@vger.kernel.org> # v4.20+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
The offloaded HW stats are designed to allow per-netdevice enablement and
disablement. These stats are only accessible through RTM_GETSTATS, and
therefore should be toggled by a RTM_SETSTATS message. Add it, and the
necessary skeleton handler.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
struct dh contains several pointer members corresponding to DH parameters:
->key, ->p and ->g. A subsequent commit will introduce "dh" wrapping
templates of the form "ffdhe2048(dh)", "ffdhe3072(dh)" and so on in order
to provide built-in support for the well-known safe-prime ffdhe group
parameters specified in RFC 7919. These templates will need to set the
group parameter related members of the (serialized) struct dh instance
passed to the inner "dh" kpp_alg instance, i.e. ->p and ->g, to some
constant, static storage arrays.
Turn the struct dh pointer members' types into "pointer to const" in
preparation for this.
Signed-off-by: Nicolai Stange <nstange@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The SELinux policy capability enum names are rather long and follow
the "POLICYDB_CAPABILITY_XXX format". While the "POLICYDB_" prefix
is helpful in tying the enums to other SELinux policy constants,
macros, etc. there is no reason why we need to spell out
"CAPABILITY" completely. Shorten "CAPABILITY" to "CAP" in order to
make things a bit shorter and cleaner.
Moving forward, the SELinux policy capability enum names should
follow the "POLICYDB_CAP_XXX" format.
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
This patch adds new rtm tunnel msg and api for tunnel id
filtering in dst_metadata devices. First dst_metadata
device to use the api is vxlan driver with AF_BRIDGE
family.
This and later changes add ability in vxlan driver to do
tunnel id filtering (or vni filtering) on dst_metadata
devices. This is similar to vlan api in the vlan filtering bridge.
this patch includes selinux nlmsg_route_perms support for RTM_*TUNNEL
api from Benjamin Poirier.
Signed-off-by: Roopa Prabhu <roopa@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove inappropriate use of ntohs() and assign the
port value directly.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
|
|
This backmerges v5.17-rc6 so I can merge some amdgpu and some tegra changes on top.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
These ioctls are equivalent to fcntl(fd, F_SETFD, flags), which SELinux
always allows too. Furthermore, a failed FIOCLEX could result in a file
descriptor being leaked to a process that should not have access to it.
As this patch removes access controls, a policy capability needs to be
enabled in policy to always allow these ioctls.
Based-on-patch-by: Demi Marie Obenour <demiobenour@gmail.com>
Signed-off-by: Richard Haines <richard_c_haines@btinternet.com>
[PM: subject line tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
git://git.linaro.org:/people/jens.wiklander/linux-tee into arm/drivers
TEE shared memory cleanup for v5.18
- The TEE shared memory pool based on two pools is replaced with a single
somewhat more capable pool.
- Replaces tee_shm_alloc() and tee_shm_register() with new functions
easier to use and maintain. The TEE subsystem and the TEE drivers are
updated to use the new functions instead.
- The TEE based Trusted keys routines are updated to use the new
simplified functions above.
- The OP-TEE based rng driver is updated to use the new simplified
functions above.
- The TEE_SHM-flags are refactored to better match their usage
* tag 'tee-shm-for-v5.18' of git://git.linaro.org:/people/jens.wiklander/linux-tee:
tee: refactor TEE_SHM_* flags
tee: replace tee_shm_register()
KEYS: trusted: tee: use tee_shm_register_kernel_buf()
tee: add tee_shm_register_{user,kernel}_buf()
optee: add optee_pool_op_free_helper()
tee: replace tee_shm_alloc()
tee: simplify shm pool handling
tee: add tee_shm_alloc_user_buf()
tee: remove unused tee_shm_pool_alloc_res_mem()
hwrng: optee-rng: use tee_shm_alloc_kernel_buf()
optee: use driver internal tee_context for some rpc
Link: https://lore.kernel.org/r/20220218184802.GA968155@jade
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
tools/testing/selftests/net/mptcp/mptcp_join.sh
34aa6e3bccd8 ("selftests: mptcp: add ip mptcp wrappers")
857898eb4b28 ("selftests: mptcp: add missing join check")
6ef84b1517e0 ("selftests: mptcp: more robust signal race test")
https://lore.kernel.org/all/20220221131842.468893-1-broonie@kernel.org/
drivers/net/ethernet/mellanox/mlx5/core/en/tc/act/act.h
drivers/net/ethernet/mellanox/mlx5/core/en/tc/act/ct.c
fb7e76ea3f3b6 ("net/mlx5e: TC, Skip redundant ct clear actions")
c63741b426e11 ("net/mlx5e: Fix MPLSoUDP encap to use MPLS action information")
09bf97923224f ("net/mlx5e: TC, Move pedit_headers_action to parse_attr")
84ba8062e383 ("net/mlx5e: Test CT and SAMPLE on flow attr")
efe6f961cd2e ("net/mlx5e: CT, Don't set flow flag CT for ct clear flow")
3b49a7edec1d ("net/mlx5e: TC, Reject rules with multiple CT actions")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.18:
UAPI Changes:
Cross-subsystem Changes:
- Split out panel-lvds and lvds dt bindings .
- Put yes/no on/off disabled/enabled strings in linux/string_helpers.h
and use it in drivers and tomoyo.
- Clarify dma_fence_chain and dma_fence_array should never include eachother.
- Flatten chains in syncobj's.
- Don't double add in fbdev/defio when page is already enlisted.
- Don't sort deferred-I/O pages by default in fbdev.
Core Changes:
- Fix missing pm_runtime_put_sync in bridge.
- Set modifier support to only linear fb modifier if drivers don't
advertise support.
- As a result, we remove allow_fb_modifiers.
- Add missing clear for EDID Deep Color Modes in drm_reset_display_info.
- Assorted documentation updates.
- Warn once in drm_clflush if there is no arch support.
- Add missing select for dp helper in drm_panel_edp.
- Assorted small fixes.
- Improve fb-helper's clipping handling.
- Don't dump shmem mmaps in a core dump.
- Add accounting to ttm resource manager, and use it in amdgpu.
- Allow querying the detected eDP panel through debugfs.
- Add helpers for xrgb8888 to 8 and 1 bits gray.
- Improve drm's buddy allocator.
- Add selftests for the buddy allocator.
Driver Changes:
- Add support for nomodeset to a lot of drm drivers.
- Use drm_module_*_driver in a lot of drm drivers.
- Assorted small fixes to bridge/lt9611, v3d, vc4, vmwgfx, mxsfb, nouveau,
bridge/dw-hdmi, panfrost, lima, ingenic, sprd, bridge/anx7625, ti-sn65dsi86.
- Add bridge/it6505.
- Create DP and DVI-I connectors in ast.
- Assorted nouveau backlight fixes.
- Rework amdgpu reset handling.
- Add dt bindings for ingenic,jz4780-dw-hdmi.
- Support reading edid through aux channel in ingenic.
- Add a drm driver for Solomon SSD130x OLED displays.
- Add simple support for sharp LQ140M1JW46.
- Add more panels to nt35560.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/686ec871-e77f-c230-22e5-9e3bb80f064a@linux.intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux fix from Paul Moore:
"A second small SELinux fix which addresses an incorrect
mutex_is_locked() check"
* tag 'selinux-pr-20220223' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: fix misuse of mutex_is_locked()
|
|
__setup() handlers should return 1 if the parameter is handled.
Returning 0 causes the entire string to be added to init's
environment strings (limited to 32 strings), unnecessarily polluting it.
Using the documented strings "TOMOYO_loader=string1" and
"TOMOYO_trigger=string2" causes an Unknown parameter message:
Unknown kernel command line parameters
"BOOT_IMAGE=/boot/bzImage-517rc5 TOMOYO_loader=string1 \
TOMOYO_trigger=string2", will be passed to user space.
and these strings are added to init's environment string space:
Run /sbin/init as init process
with arguments:
/sbin/init
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/bzImage-517rc5
TOMOYO_loader=string1
TOMOYO_trigger=string2
With this change, these __setup handlers act as expected,
and init's environment is not polluted with these strings.
Fixes: 0e4ae0e0dec63 ("TOMOYO: Make several options configurable.")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Link: https://lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Cc: James Morris <jmorris@namei.org>
Cc: Kentaro Takeda <takedakn@nttdata.co.jp>
Cc: tomoyo-dev-en@lists.osdn.me
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
|