| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This commit takes ALSA dice driver to perform sequence replay for media
clock recovery.
Unlike the other types of device, DICE-based devices interpret the value
of syt field of CIP header in rx packets as presentation time for audio
playback, thus it's required for driver to compute value for outgoing
packet adequate to the device. It's done by media clock recovery by
handling tx packets.
The device starts packet transmission immediately at operation to
GLOBAL_ENABLE thus on-the-fly mode is not required.
DICE ASICs supports several pairs of isochronous packet streams.
Actually, maximum two pairs of streams are supported by devices.
We have three cases regarding to the number of streams:
1. a pair of streams
2. two tx packet streams and one rx packet streams
3. one tx packet streams and two rx packet streams
4. two pair of streams
The decision of playback timing is slightly different in the four cases.
In the case 1, sequence replay in the pair results in suitable playback
timing.
In the case 2, sequence replay from the first tx packet stream to rx
packet stream results in suitable playback timing.
In the case 3, sequence replay from tx packet stream to all of rx packet
stream results in suitable playback timing. Furthermore, the cycle to
start receiving packets should be the same between all rx packet streams.
In the case 4, sequence replay in each pair results in suitable playback
timing. Furthermore, the cycle to start receiving packets should be the
same between all rx packet streams.
The sequence replay is tested with below models:
* For case 1:
* TC Electronic Konnekt 24d (DiceII)
* TC Electronic Konnekt 8 (DiceII)
* TC Electronic Konnekt Live (DiceII)
* TC Electronic Impact Twin (DiceII)
* TC Electronic Digital Konnekt X32 (DiceII)
* TC Electronic Desktop Konnekt 6 (TCD2220)
* Solid State Logic Duende Classic (DiceII)
* Solid State Logic Duende Mini (DiceII)
* PreSonus FireStudio Project (TCD2210)
* PreSonus FireStudio Mobile (TCD2210)
* Lexicon I-ONIX FW810s (TCD2220)
* Avid Mbox 3 Pro (TCD2220)
* For case 2 (but case 1 depends on sampling transfer frequency):
* Alesis iO 26 (DiceII)
* Alesis iO 14 (DiceII)
* Alesis MultiMix 12 FireWire (DiceII)
* Focusrite Saffire Pro 26 (TCD2220)
* For case 3 (but case 1 depends on sampling transfer frequency):
* M-Audio Profire 610 (TCD2220)
* Loud Technology Mackie Onyx Blackbird (TCD2210)
* For case 4:
* TC Electronic Studio Konnekt 48 (DiceII + TCD2220)
* PreSonus FireStudio (DiceII)
* M-Audio Profire 2626 (TCD2220)
* Focusrite Liquid Saffire 56 (TCD2220)
* Focusrite Saffire Pro 40 (TCD2220)
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210601081753.9191-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
operation
NOTIFY_CLOCK_ACCEPTED notification is always generated as a result of
GLOBAL_CLOCK_SELECT operation, however NOTIFY_LOCK_CHG notification
doesn't, as long as the selected clock is already configured. In the case,
ALSA dice driver waits so long. It's inconvenient for some devices to lock
to the sequence of value in syt field of CIP header in rx packets.
This commit wait just for NOTIFY_CLOCK_ACCEPTED notification by reverting
changes partially done by two commits below:
* commit fbeac84dbe9e ("ALSA: dice: old firmware optimization for Dice notification")
* commit aec045b80d79 ("ALSA: dice: change notification mask to detect lock status change")
I note that the successful lock to the sequence of value in syt field of
CIP header in rx packets results in NOTIFY_EXT_STATUS notification, then
EXT_STATUS_ARX1_LOCKED bit stands in GLOBAL_EXTENDED_STATUS register.
The notification can occur enough after receiving the batch of rx packets.
When the sequence doesn't include value in syt field of CIP header in rx
packets adequate to the device, the notification occurs again and the bit
is off.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210601081753.9191-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This commit takes ALSA fireface driver to perform sequence replay for
media clock recovery.
The protocol specific to RME Fireface series is not compliant to
IEC 61883-1/6 since it has no CIP header, therefore presentation time
is not used for media clock recovery. The sequence of the number of data
blocks per packet is important.
I note that the device skips an isochronous cycle corresponding to an
empty packet or a NODATA packet in blocking transmission method of
IEC 61883-1/6. For sequence replay, the cycle is handled as receiving an
empty packet. Furthermore, it doesn't start packet transmission till
receiving any packet.
The sequence replay is tested with below models:
* Fireface 400
* Fireface 800
* Fireface 802
I note that it is better to initialize Fireface 400 in advance by
initialization transaction implemented in snd-fireface-ctl-service of
snd-firewire-ctl-services project. You can see whether initialized or
not by HOST LED on the device. Unless, the device often stops packet
transmission even if session starts.
I guess the sequence replay also works well with below models:
* Fireface UFX
* Fireface UCX
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210531025103.17880-7-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This commit takes ALSA firewire-tascam driver to perform sequence replay
for media clock recovery.
The protocol specific to Tascam FireWire series is not compliant to
IEC 61883-1/6 in terms of syt field of CIP. The protocol doesn't use
presentation time in received CIP for playback timing. The sequence of
the number of data blocks per packet is important for media clock
recovery.
Although the devices in Tascam FireWire series transfer packets
regardless of receiving packets, the tx packets includes no events
in the beginning of streaming. It takes so long to multiplex any event
into the packet after receiving the sequence of packets. As long as I
experienced, it takes several thousands of isochronous cycle. Furthermore,
just after changing sampling transmission frequency, it stops multiplexing
event at once, then starts multiplexing again.
The sequence replay is tested with below models:
* FW-1884
* FW-1804
* FW-1082
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210531025103.17880-6-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This commit takes ALSA firewire-digi00x driver to perform sequence replay
for media clock recovery.
All of models in Digidesign digi00x family don't transfer isochronous
packets till receiving isochronous packets. The on-the-fly mode is used
for the purpose. They don't interpret presentation time expressed in syt
field of received CIP, therefore the sequence of the number of data blocks
per packet is important for media clock recovery.
The sequence replay is tested with below models:
* Digidesign Digi 002
* Digidesign Digi 002 Rack
* Digidesign Digi 003
* Digidesign Digi 003 Rack
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210531025103.17880-5-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This commit takes ALSA oxfw driver to perform sequence replay for media
clock recovery. Unfortunately, OXFW970 ASIC and its firmware has a quirk
called jumbo payload which skips several isochronous cycles for packet
transmission, thus the sequence replay is just adopted to OXFW971 ASIC.
As well as Fireworks, OXFW ASICs also ignores presentation time against
the way in IEC 61883-1/6.
The sequence replay is tested with below models:
* Tascam FireOne
* Stanton Magnetics SCS.1m
* Apogee Duet FireWire
For below models, the sequence replay is tested to be disabled:
* Griffin FireWave
* Behringer F-Control Audio 202
* Loud Technology Tapco Link.FireWire 4x6
* Loud Technology Mackie Onyx Satellite
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210531025103.17880-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Echo Digital Audio Corporation had US patent US7599388B2 titled as
'System and method for high-bandwidth serial bus data transfer'. In the
patent, dual-banked shared memory is used to deliver data between
serial bus transmission and processor in FIFO way. The patent seems to be
used for Fireworks board module. The mechanism is not compliant to
synchronization based on presentation time expressed in syt field
of CIP header. Fireworks board module takes care of the sequence of
the number of data blocks per packet and just ignores the value of syt
field.
This commit takes fireworks driver to performs sequence replay for media
clock recovery. As long as I tested, Audiofire 2 and 4 have a quirk to
skip an isochronous cycle several thousands after starting packet
transmission.
The sequence replay is tested with below models:
* Loud Technology Mackie 400f
* Echo Audio Audiofire 12 (DSP model)
* Echo Audio Audiofire 12 (FPGA model)
* Echo Audio Audiofire 8 (DSP model)
* Echo Audio Audiofire 8 (FPGA model)
* Echo Audio Audiofire Pre8
* Echo Audio Audiofire 4
* Echo Audio Audiofire 2
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210531025103.17880-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
In the design of Fireworks board module, the device does't adjust its
media clock voluntarily by the sequence of presentation time expressed in
syt field of CIP header of received packet.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210531025103.17880-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Drivers of ALSA firewire stack can process packets for IT/IR context in
process context when the process operates ALSA PCM character device by
calling ioctl(2) with some requests. The ioctl requests are:
* SNDRV_PCM_IOCTL_HWSYNC
* SNDRV_PCM_IOCTL_SYNC_PTR
* SNDRV_PCM_IOCTL_REWIND
* SNDRV_PCM_IOCTL_FORWARD
* SNDRV_PCM_IOCTL_WRITEI_FRAMES
* SNDRV_PCM_IOCTL_READI_FRAMES
* SNDRV_PCM_IOCTL_WRITEN_FRAMES
* SNDRV_PCM_IOCTL_READN_FRAMES
This means that general application can process PCM frames apart from
hardware IRQ invocation, even if they are programmed by either IRQ-based
scheduling model or Timer-based scheduling model.
This commit add support for Timer-based scheduling model by allowing
PCM runtime to suppress both process wakeup per period and scheduling
hardware IRQ.
SNDRV_PCM_INFO_BATCH is obsoleted since ALSA IEC 61883-1/6 packet streaming
engine can report the number of transferred PCM frames within PCM period
boundary. The granularity equals to SYT_INTERVAL in blocking transmission.
In non-blocking transmission, it doesn't equal to SYT_INTERVAL but doesn't
exceed.
This patch is tested with PulseAudio, and --sched-model option of axfer
with fix against the issue reported at:
* https://lore.kernel.org/alsa-devel/687f9871-7484-1370-04d1-9c968e86f72b@linux.intel.com/#r
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210527123253.174315-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Models in below series start transmission of packet after receiving the
sequence of packets:
* Digidesign Digi00x family
* RME Fireface series
Additionally, models in Tascam FireWire series start multiplexing PCM
frames into packets enough after receiving packets. It's required to
transfer packets on-the-fly for the above models according to nominal
sampling transfer frequency before starting sequence replay.
This commit allows drivers to decide whether the engine transfers packet
on-the-fly or not.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210527122611.173711-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
ALSA IEC 61883-1/6 packet streaming engine uses pre-computed parameters
ideal for nominal sampling transfer frequency (STF) to transfer packets
to device since it was added 2011. As a result of user experience for a
decade, it is clear that the sequence is not suitable to some actual
devices. It takes the devices to generate noise, and causes any type of
discontinuity in the series of packet transferred from the device. It's
required for the engine to transfer packets according to effective STF.
The effective STF is given by media clock recovered by the sequence of
packet transferred from the target device. In the previous commit, the
sequence is already cached. The media clock recovery can be achieved by
analyzing the sequence.
In technological world, many ideas are proposed for media clock recovery.
However, the small part of them could be actually adopted in our case
since floating point arithmetic is not mostly available in Linux kernel
land.
This commit adopts the simple way from them; sequence replay, which means
that the sequence of parameters from incoming packet is used as is to
transfer outgoing packets. The media clock is not computed internally,
but the sequence of outgoing packet superficially looks to be generated by
the media clock.
The association between source and destination is decided when starting
AMDTP domain. When the target device supports a pair of isochronous packet
streams, the tx stream is source and the rx stream is destination. When it
supports two pair of streams, each of tx stream is associated to
corresponding rx stream in its order. When it supports less number of tx
streams than rx streams, the fist tx stream is selected for all of rx
streams. When it supports more tx streams than rx streams, the first tx
packet is associated to the rx stream.
As I noted in previous commit, the sequence of parameters from incoming
packet is different between devices, time to time. It is worse idea to
replay the sequence of parameters from a device for the sequence of
packet to the other devices even if they are in the same category of
device.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210527122611.173711-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
In design of audio and music unit in IEEE 1394 bus, feedback of
effective sampling transfer frequency (STF) is delivered by packets
transferred from device. The devices supported by ALSA firewire stack
are categorized to three groups regarding to it.
* Group 1:
* Echo Audio Fireworks board module
* Oxford Semiconductor OXFW971 ASIC
* Digidesign Digi00x family
* Tascam FireWire series
* RME Fireface series
* Group 2:
* BridgeCo. DM1000/DM1100/DM1500 ASICs for BeBoB solution
* TC Applied Technologies DICE ASICs
* Group 3:
* Mark of the Unicord FireWire series
In group 1, the effective STF is determined by the sequence of the number
of events per packet. In group 2, the sequence of presentation timestamp
expressed in syt field of CIP header is interpreted as well. In group 3,
the presentation timestamp is expressed in source packet header (SPH) of
each data block.
I note that some models doesn't take care of effective STF with large
internal buffer. It's reasonable to name it as group 0:
* Group 0
* Oxford Semiconductor OXFW970 ASIC
The effective STF is known to be slightly different from nominal STF for
all of devices, and to be different between the devices. Furthermore, the
effective STF is known to be shifted for long-period transmission. This
makes it hard for software to satisfy the effective STF when processing
packets to the device.
The effective STF is deterministic as a result of analyzing the batch of
packet transferred from the device. For the analysis, caching the sequence
of parameter in the packet is required.
This commit adds an option so that AMDTP domain structure takes AMDTP
stream structure to cache the sequence of parameters in packet transferred
from the device. The parameters are offset ticks of syt field against the
cycle to receive the packet and the number of data blocks per packet.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210527122611.173711-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
In former commit, ALSA IEC 61883-1/6 packet streaming engine drops
initial tx packets till the packet includes any event. This allows ALSA
bebob driver not to give option to skip initial packet since the engine
does drop the initial packet.
However, M-Audio ProFire Lightbridge has a quirk to stop packet
transmission after start multiplexing event to the packet. After several
thousands cycles, it restart packet transmission again.
This commit specializes the usage of initial skip option for the model.
Additionally, this commit expands timeout enough to wait processing
content of tx packet.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210524031346.50539-5-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The order to establish connection seems to be meaningless.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210524031346.50539-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The member of callbacked in AMDTP stream structure is not used anymore.
Instead, ready_processing member is used to wake up yielding task of user
process.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210524031346.50539-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The devices based on BeBoB ASICs or the devices in Tascam FireWire
series transfer a batch of NODATA packet or empty packet in the beginning
of packet streaming. To avoid processing them, current implementation uses
an option to skip processing content of tx packet during some initial
cycles. However, the hard-coded number is not enough useful.
This commit drops content of packets till the packet includes any event
firstly. The function of option is to skip processing content of tx packet
with any event after dropping.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210524031346.50539-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
In later commit, transfer delay is used in both IR and IT contexts. This
commit refactors regardless of transfer delay.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210522013303.49596-7-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This commit dissolves sequence generator in terms of the number of data
blocks per packet.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210522013303.49596-6-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This commit dissolves sequence generator in terms of syt offsets for
packet.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210522013303.49596-5-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This commit refactors the arguments of helper function to generate the
descriptors of packet.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210522013303.49596-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Current implementation pools the sequence in AMDTP domain. This is convenient
regarding to memory usage and computation time, however inconvenient for the
devices such that several rx streams are expected to transfer timing
information independently.
This commit refactors to pool the sequence per rx packet stream.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210522013303.49596-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Many devices are unaware of syt field in rx CIP for playback timing.
This commit adds a flag to cancel processing syt field. Actually,
syt calculation is required to decide the number of events per rx packet.
The flag put 0xffff to CIP header of rx packet. On the other hand,
The value of syt field in CIP header of tx packet is unavailable. The
sequence of packet descriptor for tx packet includes 0 for the offset
of syt field to avoid computation.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210522013303.49596-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The check of error is just done for the case that CIP header is available.
This commit moves auto variable into the branch to process CIP header.
Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: c09010eeb373 ("ALSA: firewire-lib: handle the case that empty isochronous packet payload for CIP")
Suggested-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210520130409.GA170303@workstation
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
When starting AMDTP domain, tasks in process context yields running CPU
till all of isochronous context get callback, with an assumption that
it's OK to process content of packet.
However several isochronous cycles are skipped to transfer rx packets, or
the content of rx packets are dropped, to manage the timing to start
processing the packets.
This commit changes the timing for tasks in process context to wake up
when processing content of packet is actually ready.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210520040154.80450-9-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
several IT contexts
DICE ASICs support several pairs of isochronous packet streaming and
expect software to queue packets with the same timing information into
the same isochronous cycle.
This commit adds structure member to manage the cycle to start
processing packet in several IT contexts. The cycle is decided when
batch of isochronous cycle is skipped in callback to isochronous context
for IRQ target.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210520040154.80450-8-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
It's several hundred cycles from starting isochronous contexts and the
actual cycle to start processing content of packet. It's useless to
start the context for IRQ target apart from the other contexts.
This commit refactors helper function to start AMDTP domain in the point.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210520040154.80450-7-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Current implementation of ALSA IEC 61883-1/6 packet streaming engine
allows drivers to decide isochronous cycle to start IR context. This
option is mainly used to avoid processing the sequence of packet with
some quirks; e.g. discontinuity of counter. However, it's inconvenient
to fail to continue packet processing when the target device doesn't
start transmission of packet till the decided cycle.
This commit changes the behaviour. As an alternative to the start cycle
for IR context, the cycle count to drop content of packet in the beginning
of IR context.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210520040154.80450-6-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
several IR contexts
DICE ASICs support several pairs of isochronous packet streaming. It's
convenient for drivers to process content of the packet in the same cycle
timing.
This commit adds structure member to manage the cycle to start
processing packet in several IR contexts. The cycle is decided in the
first callback of the IR contexts. The content of packet is dropped
till the cycle.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210520040154.80450-5-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This commit refactors regarding to the size of CIP header.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210520040154.80450-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
It's convenient to calculate the size of context payload apart from
the size of isochronous packet payload.
This commit adds a helper function for it.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210520040154.80450-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Some macros are added to refactor codes related to CIP header.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210520040154.80450-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This commit fulfils sequence descriptors for skipped cycle when
it's one cycle. This is preparation for future integration.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210518130048.146596-9-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Within devices supported by drivers in ALSA firewire stack, OXFW-based
devices and Fireface devices are known to skip isochronous cycle for
packet transmission. The former is due to the jumbo payload quirk. The
latter is due to vendor protocol in which empty packet is not
transferred in blocking mode.
Although nothing to do just for handling events of the packet, packet
continuity is necessarily for media clock recovery. This commit checks
whether any cycle is continue or not.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210518130048.146596-8-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The size of CIP payload is now passed to helper function to parse CIP
header.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210518130048.146596-7-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This commit refactors regarding to function argument for the length of
isochronous packet payload.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210518130048.146596-6-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
1394 cycle
Some macros and functions are renamed so that they compute isochronous
cycle within maximum count of second in isochronous context of 1394
OHCI.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210518130048.146596-5-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
A internal structure is used to gather parameters relevant to sequence
descriptor.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210518130048.146596-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
for CIP
Two quadlets are at least included in isochronous packet payload for
Common Isochronous Packet (CIP) format in IEC 61883-1. However, it's
better to equip ALSA IEC 61883-1/6 packet streaming engine for contrary
packet.
This commit handles isochronous cycle to process such packet so that the
cycle is skipped.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210518130048.146596-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
period in domain structure
The number of PCM frame per period is common between PCM substreams
handled in AMDTP stream in AMDTP domain.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210518130048.146596-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Stanton SCS.1m and Apogee Duet FireWire use blocking transmission method
unlike the other models.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210518084557.102681-12-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
A new entry is added to the quirk enumeration for wrong_dbs quirk to
obsolete structure member.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210518084557.102681-11-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
A new macro is added to describe the maximum number of cycles to accept
cycle skip by jumbo payload quirk.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210518084557.102681-10-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This commit adds enumeration to describe quirks of OXFW ASICs.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210518084557.102681-9-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
ALSA OXFW supports two types of ASICS; OXFW970 and OXFW971. The former
is known to have a quirk we call 'jumbo payload' that some isochronous
cycles are skipped to transfer isochronous packets during handling
asynchronous transaction. The quirk seems to correspond to firmware
initially delivered by Oxford Semiconductor since the quirk is not
confirmed for Mackie Onyx Satellite in which the revised firmware is
available. The quirk is not confirmed in the latter.
This commit adds code comment to describe the quirk.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210518084557.102681-8-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Sattelite
Loud Technologies Mackie Onyx Satellite is identified as the model with
OXFW970 ASIC.
This commit adds explicit entry for the model.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210518084557.102681-7-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Link.FireWire 4x6
Loud Technologies Tapco Link.FireWire 4x6 is identified as the model
with OXFW970 ASIC.
This commit adds explicit entry for the model.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210518084557.102681-6-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This commit changes condition statement to call mackie models detection
just for the device entry. Additionally, comment is added for Onyx 1640i.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210518084557.102681-5-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
version
All of the devices known to be based on OXFW ASICs have the same layout
of configuration ROM, in which unit directory includes vendor, model,
specifier_id and version immediate values. Especially, the pair of
specifier_id and version is fixed to represent AV/C general protocol.
This commit refactors device entries to fulfil with these 4 elements.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210518084557.102681-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
enumerator-constant
It brings some inconvenience in practice to use enumerated type for
variable to which bitwise OR with enumerator constant is assigned.
This commit replaces declarations of enumerated type with int type.
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210518084557.102681-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This reverts commit 0edabdfe89581669609eaac5f6a8d0ae6fe95e7f.
I've explained that optional FireWire card for d.2 is also built-in to
d.2 Pro, however it's wrong. The optional card uses DM1000 ASIC and has
'Mackie DJ Mixer' in its model name of configuration ROM. On the other
hand, built-in FireWire card for d.2 Pro and d.4 Pro uses OXFW971 ASIC
and has 'd.Pro' in its model name according to manuals and user
experiences. The former card is not the card for d.2 Pro. They are similar
in appearance but different internally.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210518084557.102681-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
