| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The cs_dsp instance is initialized in the driver probe() so it
should be freed in the driver remove(). Also fix a missing call
to cs_dsp_remove() in the error path of cs35l56_hda_common_probe().
The call to cs_dsp_remove() was being done in the component unbind
callback cs35l56_hda_unbind(). This meant that if the driver was
unbound and then re-bound it would be using an uninitialized cs_dsp
instance.
It is best to initialize the cs_dsp instance in probe() so that it
can return an error if it fails. The component binding API doesn't
have any error handling so there's no way to handle a failure if
cs_dsp was initialized in the bind.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 73cfbfa9caea ("ALSA: hda/cs35l56: Add driver for Cirrus Logic CS35L56 amplifier")
Link: https://lore.kernel.org/r/20240508100811.49514-1-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Move the initialization of the shared struct hda_component array into
hda_component_manager_bind().
The purpose of the manager bind() callback is to allow it to perform
initialization before binding in the component drivers. This is the
correct place to initialize the shared data.
The original implementation initialized the shared data in
hda_component_manager_init(). This is only done once during probe()
of the manager driver. So if the component binding was unbound and
then rebound, the shared data would not be re-initialized.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: fd895a74dc1d ("ALSA: hda: realtek: Move hda_component implementation to module")
Link: https://lore.kernel.org/r/20240508100347.47283-1-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Use the control private_free callback to free the associated data
block. This ensures that the memory won't leak, whatever way the
control gets destroyed.
The original implementation didn't actually remove the ALSA
controls in hda_cs_dsp_control_remove(). It only freed the internal
tracking structure. This meant it was possible to remove/unload the
amp driver while leaving its ALSA controls still present in the
soundcard. Obviously attempting to access them could cause segfaults
or at least dereferencing stale pointers.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 3233b978af23 ("ALSA: hda: hda_cs_dsp_ctl: Add Library to support CS_DSP ALSA controls")
Link: https://lore.kernel.org/r/20240508095627.44476-1-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20240507135513.14919-3-tiwai@suse.de
|
|
This laptop uses CS35L41 HDA with 2 amps using I2C and Internal Boost.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240507160131.356114-1-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This fixes the sound not working from internal speakers on Lenovo
Legion Y9000X 2022 IAH7 models.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218744
Signed-off-by: Junhao Pei <ArcticLampyrid@outlook.com>
Link: https://lore.kernel.org/r/TYCP286MB2535ACD5188A91C000B7CD13C41C2@TYCP286MB2535.JPNP286.PROD.OUTLOOK.COM
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Pull HD-audio CONFIG_PM cleanup.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add HD Audio PCI ID and HDMI codec vendor ID for Intel Battlemage.
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://lore.kernel.org/r/20240506052531.1150062-1-chaitanya.kumar.borah@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
All of these laptops do not have _DSD, so need to be added to the
configuration table.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240429154853.9393-3-sbinding@opensource.cirrus.com
|
|
IRQs used for CS35L41 HDA are used to detect and attempt to recover
from errors. Without these interrupts, the driver should behave as
normal.
For laptops which contain a bad configuration for the interrupt in the
BIOS, the current behaviour of failing when trying to configure the
interrupt means the probe fails, and audio is broken.
It is better for the user experience if the driver instead warns that
no interrupt is configured rather than simply failing.
The drawback is that if an error occurs without the interrupt, we
firstly would not be able to trace the issue, and secondly would not
be able to attempt to recover from the issue, but this is better than
failing immediately.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240429154853.9393-2-sbinding@opensource.cirrus.com
|
|
CONFIG_PM dependencies got reduced in HD-audio codec core driver, and
now it's time to reduce in HD-audio via codec driver, too.
Simply drop CONFIG_PM ifdefs.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240506161359.6960-13-tiwai@suse.de
|
|
CONFIG_PM dependencies got reduced in HD-audio codec core driver, and
now it's time to reduce in HD-audio sigmatel codec driver, too.
Simply drop CONFIG_PM ifdefs.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240506161359.6960-12-tiwai@suse.de
|
|
CONFIG_PM dependencies got reduced in HD-audio codec core driver, and
now it's time to reduce in HD-audio realtek codec driver, too.
Simply drop CONFIG_PM ifdefs. A superfluous __maybe_unused attribute
was dropped as well.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240506161359.6960-11-tiwai@suse.de
|
|
CONFIG_PM dependencies got reduced in HD-audio codec core driver, and
now it's time to reduce in HD-audio HDMI codec driver, too.
Simply drop CONFIG_PM ifdefs.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240506161359.6960-10-tiwai@suse.de
|
|
CONFIG_PM dependencies got reduced in HD-audio codec core driver, and
now it's time to reduce in HD-audio generic cs8409 driver, too.
Simply drop CONFIG_PM ifdefs.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240506161359.6960-9-tiwai@suse.de
|
|
CONFIG_PM dependencies got reduced in HD-audio codec core driver, and
now it's time to reduce in HD-audio conexant codec driver, too.
Simply drop CONFIG_PM ifdefs.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240506161359.6960-8-tiwai@suse.de
|
|
CONFIG_PM dependencies got reduced in HD-audio codec core driver, and
now it's time to reduce in HD-audio cirrus codec driver, too.
Simply drop CONFIG_PM ifdefs.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240506161359.6960-7-tiwai@suse.de
|
|
CONFIG_PM dependencies got reduced in HD-audio codec core driver, and
now it's time to reduce in HD-audio ca0132 codec driver, too.
Simply drop CONFIG_PM ifdefs.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240506161359.6960-6-tiwai@suse.de
|
|
CONFIG_PM dependencies got reduced in HD-audio codec core driver, and
now it's time to reduce in HD-audio analog codec driver, too.
Simply drop CONFIG_PM ifdefs.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240506161359.6960-5-tiwai@suse.de
|
|
CONFIG_PM dependencies got reduced in HD-audio codec core driver, and
now it's time to reduce in HD-audio generic codec driver, too.
Simply drop CONFIG_PM ifdefs.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240506161359.6960-4-tiwai@suse.de
|
|
CONFIG_PM is almost mandatory nowadays for real systems, but we have
lots of CONFIG_PM dependent code in snd-hda-codec helper code.
Let's reduce the dependencies of CONFIG_PM now. The only visible
drawback would be a couple of superfluous trace entries for runtime
PM, but we can live with that.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240506161359.6960-3-tiwai@suse.de
|
|
snd-hda-intel contains lots of CONFIG_PM dependent code although
CONFIG_PM is almost mandatory nowadays, and it makes the code
unnecessarily complex.
Let's reduce the dependencies of CONFIG_PM in snd-hda-intel driver
code. I left a few module options to be dependent on CONFIG_PM (which
are visible to users), but other places are either enabled or
optimized by compiler automatically.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240506161359.6960-2-tiwai@suse.de
|
|
The alc_spec.power_hook is defined only with CONFIG_PM, and the recent
fix overlooked it, resulting in a build error without CONFIG_PM.
Fix it with the simple ifdef and set __maybe_unused for the function.
We may drop the whole CONFIG_PM dependency there, but it should be
done in a separate cleanup patch later.
Fixes: 1e707769df07 ("ALSA: hda/realtek - Set GPIO3 to default at S4 state for Thinkpad with ALC1318")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202405012104.Dr7h318W-lkp@intel.com/
Message-ID: <20240502062442.30545-1-tiwai@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.9
This is much larger than is ideal, partly due to your holiday but also
due to several vendors having come in with relatively large fixes at
similar times. It's all driver specific stuff.
The meson fixes from Jerome fix some rare timing issues with blocking
operations happening in triggers, plus the continuous clock support
which fixes clocking for some platforms. The SOF series from Peter
builds to the fix to avoid spurious resets of ChainDMA which triggered
errors in cleanup paths with both PulseAudio and PipeWire, and there's
also some simple new debugfs files from Pierre which make support a lot
eaiser.
|
|
Unfortunately both Lenovo Legion Pro 7 16ARX8H and Legion 7i 16IAX7
got the very same PCI SSID while the hardware implementations are
completely different (the former is with TI TAS2781 codec while the
latter is with Cirrus CS35L41 codec). The former model got broken by
the recent fix for the latter model.
For addressing the regression, check the codec SSID and apply the
proper quirk for each model now.
Fixes: 24b6332c2d4f ("ALSA: hda: Add Lenovo Legion 7i gen7 sound quirk")
Cc: <stable@vger.kernel.org>
Link: https://bugzilla.suse.com/show_bug.cgi?id=1223462
Message-ID: <20240430163206.5200-1-tiwai@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
There is a chance of damaging the IC when S4 resume.
Add safe mode for no stream to disable GPIO3.
Thinkpad with ALC1318 platform need to add this workaround.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/r/a853dc4f0a4e412381d5f60565181247@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This patch simply add SND_PCI_QUIRK for HP Laptop 15-da3001TU to fixed
mute led of laptop.
Signed-off-by: Aman Dhoot <amandhoot12@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/CAMTp=B+3NG65Z684xMwHqdXDJhY+DJK-kuSw4adn6xwnG+b5JA@mail.gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Pull emu10k1 fixes from Oswald Buddenhagen
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
... into snd_emu1010_load_firmware_entry(). This makes it clearer that
these steps belong together tightly, as implied by prior commits.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20240428093717.3198716-5-oswald.buddenhagen@gmx.de>
|
|
It is a low-level I/O access function, so io.c is the natural place for
it.
While we're moving the code, reduce the scope of some variables, use
compound assignment operators, and add/adjust some comments.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20240428093717.3198716-4-oswald.buddenhagen@gmx.de>
|
|
There is only one call site, and there we already know that we actually
have a firmware.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20240428093717.3198716-3-oswald.buddenhagen@gmx.de>
|
|
Firstly, it is pointless to explicitly disable the power to the dock
prior to resetting the FPGA, as the latter will do the former anyway.
Secondly, it doesn't make much sense to check whether the FPGA is
already programmed. It's much simpler to just presume it is, and issue
the self-reset command. If it isn't, the effect isn't worse than the
checks themselves. As a side effect, we lose the info if the reset
fails, but there is no plausible way how that could happen unless the
card burns out while operating, and in that case we'll detect a firmware
upload failure a bit later anyway.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20240428093717.3198716-2-oswald.buddenhagen@gmx.de>
|
|
We did not delay after the second strobe signal, so another immediately
following access could potentially corrupt the written value.
This is a purely speculative fix with no supporting evidence, but after
taking out the spinlocks around the writes, it seems plausible that a
modern processor could be actually too fast. Also, it's just cleaner to
be consistent.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20240428093716.3198666-7-oswald.buddenhagen@gmx.de>
|
|
A side effect of making the dock monitoring interrupt-driven was that
we'd be very quick to program a freshly connected dock. However, for
unclear reasons, the dock does not work when we do that - despite the
FPGA netlist upload going just fine. We work around this by adding a
delay before programming the dock; for safety, the value is several
times as much as was determined empirically.
Note that a badly timed dock hot-plug would have triggered the problem
even before the referenced commit - but now it would happen 100% instead
of about 3% of the time, thus making it impossible to work around by
re-plugging.
Fixes: fbb64eedf5a3 ("ALSA: emu10k1: make E-MU dock monitoring interrupt-driven")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218584
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20240428093716.3198666-6-oswald.buddenhagen@gmx.de>
|
|
The FPGA access through the GPIO port does not interfere with other
sound processor register access, so there is no need to subject it to
emu_lock. And after moving all FPGA access out of the interrupt handler,
it does not need to be IRQ-safe, either.
What's more, attaching the dock causes a firmware upload, which takes
several seconds. We really don't want to disable IRQs for this long, and
even less also have someone else spin with IRQs disabled waiting for us.
Therefore, use a mutex for FPGA access locking.
This makes the code somewhat more noisy, as we need to wrap bigger
sections into the mutex, as it needs to enclose the spinlocks.
The latter has the "side effect" of fixing dock FPGA programming in a
corner case: a really badly timed mixer access right between entering
FPGA programming mode and uploading the netlist would mess up the
protocol.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20240428093716.3198666-5-oswald.buddenhagen@gmx.de>
|
|
The actual event processing was already done by workqueue items. We can
move the event dispatching there as well, rather than doing it already
in the interrupt handler callback.
This change has a rather profound "side effect" on the reliability of
the FPGA programming: once we enter programming mode, we must not issue
any snd_emu1010_fpga_{read,write}() calls until we're done, as these
would badly mess up the programming protocol. But exactly that would
happen when trying to program the dock, as that triggers GPIO interrupts
as a side effect. This is mitigated by deferring the actual interrupt
handling, as workqueue items are not re-entrant.
To avoid scheduling the dispatcher on non-events, we now explicitly
ignore GPIO IRQs triggered by "uninteresting" pins, which happens a lot
as a side effect of calling snd_emu1010_fpga_{read,write}().
Fixes: fbb64eedf5a3 ("ALSA: emu10k1: make E-MU dock monitoring interrupt-driven")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218584
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20240428093716.3198666-4-oswald.buddenhagen@gmx.de>
|
|
Pulled out of the next patch to improve its legibility.
As the function is now available, call it directly from
snd_emu10k1_emu1010_init(), thus making the MicroDock firmware loading
synchronous - there isn't really a reason not to. Note that this does
not affect the AudioDocks of rev1 cards, as these have no independent
power supplies, and thus come up only a while after the main card is
initialized.
As a drive-by, adjust the priorities of two messages to better reflect
their impact.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20240428093716.3198666-3-oswald.buddenhagen@gmx.de>
|
|
While there are two separate IRQ status bits for dock attach and detach,
the hardware appears to mix them up more or less randomly, making them
useless for tracking what actually happened. It is much safer to check
the dock status separately and proceed based on that, as the old polling
code did.
Note that the code assumes that only the dock can be hot-plugged - if
other option card bits changed, the logic would break.
Fixes: fbb64eedf5a3 ("ALSA: emu10k1: make E-MU dock monitoring interrupt-driven")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218584
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20240428093716.3198666-2-oswald.buddenhagen@gmx.de>
|
|
Add laptop using CS35L41 HDA.
This laptop does not have _DSD, so require entries in property
configuration table for cs35l41_hda driver.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Message-ID: <20240423162303.638211-3-sbinding@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This laptop does not have the correct _DSD settings, so needs to
obtain its configuration from the configuration table.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Message-ID: <20240423162303.638211-2-sbinding@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The Haier Boyue G42 with ALC269VC cannot detect the MIC of headset,
the line out and internal speaker until
ALC269VC_FIXUP_ACER_VCOPPERBOX_PINS quirk applied.
Signed-off-by: Ai Chao <aichao@kylinos.cn>
Cc: <stable@vger.kernel.org>
Message-ID: <20240419082159.476879-1-aichao@kylinos.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The headset mic requires a fixup to be properly detected/used.
As a reference, this specific model from 2021 reports
the following devices:
https://alsa-project.org/db/?f=1a5ddeb0b151db8fe051407f5bb1c075b7dd3e4a
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: <stable@vger.kernel.org>
Message-ID: <b92a9e49fb504eec8416bcc6882a52de89450102.1713370457.git.mchehab@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
change HDA & AMP configuration from ALC287_FIXUP_CS35L41_I2C_2 to
ALC287_FIXUP_MG_RTKC_CSAMP_CS35L41_I2C_THINKPAD for ThinkBook 16P Gen4
models to fix volumn control issue (cannot fully mute).
Signed-off-by: Huayu Zhang <zhanghuayu1233@qq.com>
Fixes: 6214e24cae9b ("ALSA: hda/realtek: Add quirks for Lenovo Thinkbook 16P laptops")
Message-ID: <tencent_37EB880C5E5BD99D21C16B288115C4545F06@qq.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Added the correct pin table for Asus GU605M and GA403U, enabling all
speakers to be controlled with the master.
Updated quirks for GU605M and GA403U by including the pin table patch
in the chain.
Co-developed-by: Luke D. Jones <luke@ljones.dev>
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Signed-off-by: Vitalii Torshyn <vitaly.torshyn@gmail.com>
Message-ID: <20240411125803.18539-1-vitaly.torshyn@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
These laptops do not have _DSD and must be added by configuration
table, however, the initial entries for them are incorrect:
Neither laptop contains a Speaker ID GPIO.
This issue would not affect audio playback, but may affect which files
are loaded when loading firmware.
Fixes: b67a7dc418aa ("ALSA: hda/realtek: Add sound quirks for Lenovo Legion slim 7 16ARHA7 models")
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20240411110813.330483-8-sbinding@opensource.cirrus.com>
|
|
In every case the 'dir' argument to cs35l41_request_firmware_file() is passed
the string "cirrus/", so this is a redundant argument and can be removed.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20240411110813.330483-7-sbinding@opensource.cirrus.com>
|
|
The original mechanism for applying calibration assumed that the
calibration data would be ordered the same as the amp instances.
However, for some 4 amp laptops, this is not the case.
To ensure that the correct calibration is applied to the correct amp,
the calibration data contains a unique id, which matches a unique id
inside the CS35L41. This can be used to match to the correct data
entry. This mechanism is available inside the shared module cs-amp-lib.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20240411110813.330483-6-sbinding@opensource.cirrus.com>
|
|
Currently, all PC systems are set to use VBSTMON for DSP1RX5_SRC,
however, this is required only for external boost systems.
Internal boost systems require VPMON instead of VBSTMON to be the
input to DSP1RX5_SRC.
All systems require DSP1RX6_SRC to be set to VBSTMON.
Also fix incorrect comment for DACPCM1_SRC to use DSP1TX1.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20240411110813.330483-5-sbinding@opensource.cirrus.com>
|
|
Add 4 laptops using CS35L41 HDA.
None of these laptops have _DSD, so require entries in property
configuration table for cs35l41_hda driver.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20240411110813.330483-4-sbinding@opensource.cirrus.com>
|
|
Add support for 2 new HP Omen models without _DSD into configuration
table.
These laptops use the PCM Gain setting for the tuning setting file.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20240411110813.330483-3-sbinding@opensource.cirrus.com>
|
