| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit 094d11768f740f11483dad4efcd9bbcffa4ce146 ]
The recent introduction of the ACP/PSP communication for IRAM/DRAM fence
register modification breaks the audio support on Valve's Steam Deck
OLED device.
It causes IPC timeout errors when trying to load DSP topology during
probing:
1707255557.688176 kernel: snd_sof_amd_vangogh 0000:04:00.5: ipc tx timed out for 0x30100000 (msg/reply size: 48/0)
1707255557.689035 kernel: snd_sof_amd_vangogh 0000:04:00.5: ------------[ IPC dump start ]------------
1707255557.689421 kernel: snd_sof_amd_vangogh 0000:04:00.5: dsp_msg = 0x0 dsp_ack = 0x91d14f6f host_msg = 0x1 host_ack = 0xead0f1a4 irq_stat >
1707255557.689730 kernel: snd_sof_amd_vangogh 0000:04:00.5: ------------[ IPC dump end ]------------
1707255557.690074 kernel: snd_sof_amd_vangogh 0000:04:00.5: ------------[ DSP dump start ]------------
1707255557.690376 kernel: snd_sof_amd_vangogh 0000:04:00.5: IPC timeout
1707255557.690744 kernel: snd_sof_amd_vangogh 0000:04:00.5: fw_state: SOF_FW_BOOT_COMPLETE (7)
1707255557.691037 kernel: snd_sof_amd_vangogh 0000:04:00.5: invalid header size 0xdb43fe7. FW oops is bogus
1707255557.694824 kernel: snd_sof_amd_vangogh 0000:04:00.5: unexpected fault 0x6942d3b3 trace 0x6942d3b3
1707255557.695392 kernel: snd_sof_amd_vangogh 0000:04:00.5: ------------[ DSP dump end ]------------
1707255557.695755 kernel: snd_sof_amd_vangogh 0000:04:00.5: Failed to setup widget PIPELINE.6.ACPHS1.IN
1707255557.696069 kernel: snd_sof_amd_vangogh 0000:04:00.5: error: tplg component load failed -110
1707255557.696374 kernel: snd_sof_amd_vangogh 0000:04:00.5: error: failed to load DSP topology -22
1707255557.697904 kernel: snd_sof_amd_vangogh 0000:04:00.5: ASoC: error at snd_soc_component_probe on 0000:04:00.5: -22
1707255557.698405 kernel: sof_mach nau8821-max: ASoC: failed to instantiate card -22
1707255557.701061 kernel: sof_mach nau8821-max: error -EINVAL: Failed to register card(sof-nau8821-max)
1707255557.701624 kernel: sof_mach: probe of nau8821-max failed with error -22
Introduce a new member skip_iram_dram_size_mod to struct acp_quirk_entry and
use it to skip IRAM/DRAM size modification for Vangogh Galileo device.
Fixes: 55d7bbe43346 ("ASoC: SOF: amd: Add acp-psp mailbox interface for iram-dram fence register modification")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://msgid.link/r/20240220201623.438944-3-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 33c3d813330718c403a60d220f03fbece0f4fb5c ]
The signed_fw_image member of struct sof_amd_acp_desc is used to enable
signed firmware support in the driver via the acp_sof_quirk_table.
In preparation to support additional use cases of the quirk table (i.e.
adding new flags), move signed_fw_image to a new struct acp_quirk_entry
and update all references to it accordingly.
No functional changes intended.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://msgid.link/r/20240220201623.438944-2-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: 094d11768f74 ("ASoC: SOF: amd: Skip IRAM/DRAM size modification for Steam Deck OLED")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9e2ab4b18ebd46813fc3459207335af4d368e323 ]
The sample rates set by the rockchip_i2s_tdm driver in master mode are
inaccurate up to 5% in several cases, due to the driver logic to configure
clocks and a nasty interaction with the Common Clock Framework.
To understand what happens, here is the relevant section of the clock tree
(slightly simplified), along with the names used in the driver:
vpll0 _OR_ vpll1 "mclk_root"
clk_i2s2_8ch_tx_src "mclk_parent"
clk_i2s2_8ch_tx_mux
clk_i2s2_8ch_tx "mclk" or "mclk_tx"
This is what happens when playing back e.g. at 192 kHz using
audio-graph-card (when recording the same applies, only s/tx/rx/):
0. at probe, rockchip_i2s_tdm_set_sysclk() stores the passed frequency in
i2s_tdm->mclk_tx_freq (*) which is 50176000, and that is never modified
afterwards
1. when playback is started, rockchip_i2s_tdm_hw_params() is called and
does the following two calls
2. rockchip_i2s_tdm_calibrate_mclk():
2a. selects mclk_root0 (vpll0) as a parent for mclk_parent
(mclk_tx_src), which is OK because the vpll0 rate is a good for
192000 (and sumbultiple) rates
2b. sets the mclk_root frequency based on ppm calibration computations
2c. sets mclk_tx_src to 49152000 (= 256 * 192000), which is also OK as
it is a multiple of the required bit clock
3. rockchip_i2s_tdm_set_mclk()
3a. calls clk_set_rate() to set the rate of mclk_tx (clk_i2s2_8ch_tx)
to the value of i2s_tdm->mclk_tx_freq (*), i.e. 50176000 which is
not a multiple of the sampling frequency -- this is not OK
3a1. clk_set_rate() reacts by reparenting clk_i2s2_8ch_tx_src to
vpll1 -- this is not OK because the default vpll1 rate can be
divided to get 44.1 kHz and related rates, not 192 kHz
The result is that the driver does a lot of ad-hoc decisions about clocks
and ends up in using the wrong parent at an unoptimal rate.
Step 0 is one part of the problem: unless the card driver calls set_sysclk
at each stream start, whatever rate is set in mclk_tx_freq during boot will
be taken and used until reboot. Moreover the driver does not care if its
value is not a multiple of any audio frequency.
Another part of the problem is that the whole reparenting and clock rate
setting logic is conflicting with the CCF algorithms to achieve largely the
same goal: selecting the best parent and setting the closest clock
rate. And it turns out that only calling once clk_set_rate() on
clk_i2s2_8ch_tx picks the correct vpll and sets the correct rate.
The fix is based on removing the custom logic in the driver to select the
parent and set the various clocks, and just let the Clock Framework do it
all. As a side effect, the set_sysclk() op becomes useless because we now
let the CCF compute the appropriate value for the sampling rate. It also
implies that the whole calibration logic is now dead code and so it is
removed along with the "PCM Clock Compensation in PPM" kcontrol, which has
always been broken anyway. The handling of the 4 optional clocks also
becomes dead code and is removed.
The actual rates have been tested playing 30 seconds of audio at various
sampling rates before and after this change using sox:
time play -r <sample_rate> -n synth 30 sine 950 gain -3
The time reported in the table below is the 'real' value reported by the
'time' command in the above command line.
rate before after
--------- ------ ------
8000 Hz 30.60s 30.63s
11025 Hz 30.45s 30.51s
16000 Hz 30.47s 30.50s
22050 Hz 30.78s 30.41s
32000 Hz 31.02s 30.43s
44100 Hz 30.78s 30.41s
48000 Hz 29.81s 30.45s
88200 Hz 30.78s 30.41s
96000 Hz 29.79s 30.42s
176400 Hz 27.40s 30.41s
192000 Hz 29.79s 30.42s
While the tests are running the clock tree confirms that:
* without the patch, vpll1 is always used and clk_i2s2_8ch_tx always
produces 50176000 Hz, which cannot be divided for most audio rates
except the slowest ones, generating inaccurate rates
* with the patch:
- for 192000 Hz vpll0 is used
- for 176400 Hz vpll1 is used
- clk_i2s2_8ch_tx always produces (256 * <rate>) Hz
Tested on the RK3308 using the internal audio codec.
Fixes: 081068fd6414 ("ASoC: rockchip: add support for i2s-tdm controller")
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://msgid.link/r/20240305-rk3308-audio-codec-v4-1-312acdbe628f@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f31e0d0c2cad23e0cc48731634f85bb2d8707790 ]
Using __exit for the remove function results in the remove callback
being discarded with SND_SOC_TLV320ADC3XXX=y. When such a device gets
unbound (e.g. using sysfs or hotplug), the driver is just removed
without the cleanup being performed. This results in resource leaks. Fix
it by compiling in the remove callback unconditionally.
This also fixes a W=1 modpost warning:
WARNING: modpost: sound/soc/codecs/snd-soc-tlv320adc3xxx: section mismatch in reference: adc3xxx_i2c_driver+0x10 (section: .data) -> adc3xxx_i2c_remove (section: .exit.text)
(which only happens with SND_SOC_TLV320ADC3XXX=m).
Fixes: e9a3b57efd28 ("ASoC: codec: tlv320adc3xxx: New codec driver")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://msgid.link/r/20240310143852.397212-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 59c6a3a43b221cc2a211181b1298e43b2c2df782 ]
According to Amlogic datasheets for the SoCs supported by this driver, the
maximum bit clock rate is 100MHz.
The tdm interface allows the rates listed by the DAI driver, regardless of
the number slots or their width. However, these will impact the bit clock
rate.
Hitting the 100MHz limit is very unlikely for most use cases but it is
possible.
For example with 32 slots / 32 bits wide, the maximum rate is no longer
384kHz but ~96kHz.
Add the constraint accordingly if the component is not already active.
If it is active, the rate is already constrained by the first stream rate.
Fixes: d60e4f1e4be5 ("ASoC: meson: add tdm interface driver")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://msgid.link/r/20240223175116.2005407-3-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e3741a8d28a1137f8b19ae6f3d6e3be69a454a0a ]
By default, when mclk-fs is not provided, the tdm-interface driver
requests an MCLK that is 4x the bit clock, SCLK.
However there is no justification for this:
* If the codec needs MCLK for its operation, mclk-fs is expected to be set
according to the codec requirements.
* If the codec does not need MCLK the minimum is 2 * SCLK, because this is
minimum the divider between SCLK and MCLK can do.
Multiplying by 4 may cause problems because the PLL limit may be reached
sooner than it should, so use 2x instead.
Fixes: d60e4f1e4be5 ("ASoC: meson: add tdm interface driver")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://msgid.link/r/20240223175116.2005407-2-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 98f681b0f84cfc3a1d83287b77697679e0398306 ]
Smatch complains about "head->full_size - head->header_size" can
underflow. To some extent, we're always going to have to trust the
firmware a bit. However, it's easy enough to add a check for negatives,
and let's add a upper bounds check as well.
Fixes: d2458baa799f ("ASoC: SOF: ipc3-loader: Implement firmware parsing and loading")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://msgid.link/r/5593d147-058c-4de3-a6f5-540ecb96f6f8@moroto.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5ad992c71b6a8e8a547954addc7af9fbde6ca10a ]
clang-16 warns about casting functions to incompatible types, as is done
here to call clk_disable_unprepare:
sound/soc/meson/t9015.c:274:4: error: cast from 'void (*)(struct clk *)' to 'void (*)(void *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict]
274 | (void(*)(void *))clk_disable_unprepare,
The pattern of getting, enabling and setting a disable callback for a
clock can be replaced with devm_clk_get_enabled(), which also fixes
this warning.
Fixes: 33901f5b9b16 ("ASoC: meson: add t9015 internal DAC driver")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Link: https://msgid.link/r/20240213215807.3326688-3-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 98ac85a00f31d2e9d5452b825a9ed0153d934043 ]
clang-16 warns about casting functions to incompatible types, as is done
here to call clk_disable_unprepare:
sound/soc/meson/aiu.c:243:12: error: cast from 'void (*)(struct clk *)' to 'void (*)(void *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict]
243 | (void(*)(void *))clk_disable_unprepare,
The pattern of getting, enabling and setting a disable callback for a
clock can be replaced with devm_clk_get_enabled(), which also fixes
this warning.
Fixes: 6ae9ca9ce986 ("ASoC: meson: aiu: add i2s and spdif support")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Link: https://msgid.link/r/20240213215807.3326688-2-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c1469c3a8a306e5f1eab1ae9585640d08e183f87 ]
As this function is now used in sof_board_helpers it requires a build
stub for the case SSP_COMMON is not built in.
Fixes: ba0c7c328762 ("ASoC: Intel: board_helpers: support amp link initialization")
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240208165545.93811-21-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9a6d7c4fb2801b675a9c31a7ceb78c84b8c439bc ]
The devm_request_irq() call is done for "dma_rt" interrupt but the error
message printed "dma_tx" interrupt on failure, fix this by updating
dma_tx -> dma_rt in dev_err_probe() message. While at it aligned the code.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Fixes: 38c042b59af0248a ("ASoC: sh: rz-ssi: Update interrupt handling for half duplex channels")
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://msgid.link/r/20240130150822.327434-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d9cacc1a2af2e1cd781b5cd2a3e57fbde64f5a2d ]
Commit 6c393ebbd74a ("ASoC: SOF: core: Implement IPC version fallback if
firmware files are missing") changed the order of some operations and
the firmware paths are not available anymore at snd_sof_probe() time.
Precisely, fw_filename_prefix is set by sof_select_ipc_and_paths() via
plat_data->fw_filename_prefix = out_profile.fw_path;
but sof_init_environment() which calls this function was moved from
snd_sof_device_probe() to sof_probe_continue(). Moreover,
snd_sof_probe() was moved from sof_probe_continue() to
sof_init_environment(), but before the call to
sof_select_ipc_and_paths().
The problem here is that amd_sof_acp_probe() uses fw_filename_prefix to
compute fw_code_bin and fw_data_bin paths, and because the field is not
yet initialized, the paths end up containing (null):
snd_sof_amd_vangogh 0000:04:00.5: Direct firmware load for (null)/sof-vangogh-code.bin failed with error -2
snd_sof_amd_vangogh 0000:04:00.5: sof signed firmware code bin is missing
snd_sof_amd_vangogh 0000:04:00.5: error: failed to load DSP firmware -2
snd_sof_amd_vangogh: probe of 0000:04:00.5 failed with error -2
Move usage of fw_filename_prefix right before request_firmware() calls
in acp_sof_load_signed_firmware().
Fixes: 6c393ebbd74a ("ASoC: SOF: core: Implement IPC version fallback if firmware files are missing")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://msgid.link/r/20231219030728.2431640-9-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 369b997a1371aeecd0a1fb0f9f4ef3747a1d07a4 ]
The ACP driver for Vangogh platform uses a quirk for Valve Galileo
device to setup a custom firmware loader, which neither requires nor
uses the firmware file indicated via the default_fw_filename member of
struct sof_dev_desc.
Since commit 6c393ebbd74a ("ASoC: SOF: core: Implement IPC version
fallback if firmware files are missing"), the provided filename gets
verified and triggers a fatal error on probe:
[ 7.719337] snd_sof_amd_vangogh 0000:04:00.5: enabling device (0000 -> 0002)
[ 7.721486] snd_sof_amd_vangogh 0000:04:00.5: SOF firmware and/or topology file not found.
[ 7.721565] snd_sof_amd_vangogh 0000:04:00.5: Supported default profiles
[ 7.721569] snd_sof_amd_vangogh 0000:04:00.5: - ipc type 0 (Requested):
[ 7.721573] snd_sof_amd_vangogh 0000:04:00.5: Firmware file: amd/sof/sof-vangogh.ri
[ 7.721577] snd_sof_amd_vangogh 0000:04:00.5: Topology file: amd/sof-tplg/sof-vangogh-nau8821-max.tplg
[ 7.721582] snd_sof_amd_vangogh 0000:04:00.5: Check if you have 'sof-firmware' package installed.
[ 7.721585] snd_sof_amd_vangogh 0000:04:00.5: Optionally it can be manually downloaded from:
[ 7.721589] snd_sof_amd_vangogh 0000:04:00.5: https://github.com/thesofproject/sof-bin/
[ 7.721997] snd_sof_amd_vangogh: probe of 0000:04:00.5 failed with error -2
According to AMD, a combined ".ri" file which includes the code and data
segments cannot be used due to a limitation preventing the code image to
be signed on build time.
Fix the issue by skipping the firmware file test if a custom loader is
being used instead of the generic one.
Fixes: 6c393ebbd74a ("ASoC: SOF: core: Implement IPC version fallback if firmware files are missing")
Co-developed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://msgid.link/r/20231219030728.2431640-8-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 222be59e5eed1554119294edc743ee548c2371d0 ]
Driver uses kasprintf() to initialize fw_{code,data}_bin members of
struct acp_dev_data, but kfree() is never called to deallocate the
memory, which results in a memory leak.
Fix the issue by switching to devm_kasprintf(). Additionally, ensure the
allocation was successful by checking the pointer validity.
Fixes: f7da88003c53 ("ASoC: SOF: amd: Enable signed firmware image loading for Vangogh platform")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://msgid.link/r/20231219030728.2431640-6-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d0ada20279db2649a7549a2b8a4a3379c59f238d ]
Handle potential acp_sofdsp_dai_links_create() errors in ACP SOF machine
driver's probe function. Note there is no need for an undo.
While at it, switch to dev_err_probe().
Fixes: 9f84940f5004 ("ASoC: amd: acp: Add SOF audio support on Chrome board")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://msgid.link/r/20231219030728.2431640-4-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
Use source instead of ret, which seems to be unrelated and will always
be zero.
Signed-off-by: Stuart Henderson <stuarth@opensource.cirrus.com>
Link: https://msgid.link/r/20240306161439.1385643-5-stuarth@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Signed-off-by: Stuart Henderson <stuarth@opensource.cirrus.com>
Link: https://msgid.link/r/20240306161439.1385643-2-stuarth@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Signed-off-by: Stuart Henderson <stuarth@opensource.cirrus.com>
Link: https://msgid.link/r/20240306161439.1385643-1-stuarth@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The HP Pavilion Aero Laptop 13-be2xxx(8BD6) requires a quirk entry for its internal microphone to function.
Signed-off-by: Al Raj Hassain <alrajhassain@gmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://msgid.link/r/20240304103924.13673-1-alrajhassain@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Timing select registers for SRC and CMD are by default
referring to the corresponding SSI word select.
The calculation rule from HW spec skips SSI8, which has
no clock connection.
>From section 43.2.18 CMD Output Timing Select Register (CMDOUT_TIMSEL),
of R-Car Series, 3rd Generation Hardware User’s Manual Rev.2.20:
CMD0_OUT_DIVCLK_ Output Timing
SEL [4:0] Signal Select
B'0 0110: ssi_ws0
B'0 0111: ssi_ws1
B'0 1000: ssi_ws2
B'0 1001: ssi_ws3
B'0 1010: ssi_ws4
B'0 1011: ssi_ws5
B'0 1100: ssi_ws6
B'0 1101: ssi_ws7
<GAP>
B'0 1110: ssi_ws9
B'0 1111: Setting prohibited
Fix the erroneous prohibited setting of timsel value 1111 (0xf) for SSI9
by using timsel value 1110 (0xe) instead. This is possible because SSI8
is not connected as shown by <GAP> in the table above.
[21.695055] rcar_sound ec500000.sound: b adg[0]-CMDOUT_TIMSEL (32):00000f00/00000f1f
Correct the timsel assignment.
Fixes: 629509c5bc478c ("ASoC: rsnd: add Gen2 SRC and DMAEngine support")
Suggested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Andreas Pape <Andreas.Pape4@bosch.com>
Signed-off-by: Yeswanth Rayapati <yeswanth.rayapati@in.bosch.com>
Tested-by: Yeswanth Rayapati <yeswanth.rayapati@in.bosch.com>
[erosca: massage commit description]
Signed-off-by: Eugeniu Rosca <eugeniu.rosca@bosch.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/20240301085003.3057-1-erosca@de.adit-jv.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The bios version can differ depending if it is a dual-boot variant of the tablet.
Therefore another DMI match is required.
Signed-off-by: Alban Boyé <alban.boye@protonmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240228192807.15130-1-alban.boye@protonmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Fix a typo in the shift value used in madera_set_fll_clks.
Fixes: 3863857dd5ca3 ("ASoC: madera: Enable clocks for input pins when used for the FLL")
Signed-off-by: Stuart Henderson <stuarth@opensource.cirrus.com>
Link: https://msgid.link/r/20240229114637.352098-1-stuarth@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Like many other models, the Lenovo 21J2 (ThinkBook 16 G5+ APO)
needs a quirk entry for the internal microphone to function.
Signed-off-by: Jiawei Wang <me@jwang.link>
Link: https://msgid.link/r/20240228073914.232204-2-me@jwang.link
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The Lenovo 21J2 (ThinkBook 16 G5+ APO) has this new variant,
as detected with lspci:
64:00.5 Multimedia controller: Advanced Micro Devices, Inc. [AMD]
ACP/ACP3X/ACP6x Audio Coprocessor (rev 63)
Signed-off-by: Jiawei Wang <me@jwang.link>
Link: https://msgid.link/r/20240228073914.232204-1-me@jwang.link
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch adds Lenovo 21J0 (ThinkBook 16 G5+ ARP) to the DMI quirks table
to enable internal microphone array.
Cc: linux-sound@vger.kernel.org
Signed-off-by: Johnny Hsieh <mnixry@outlook.com>
Link: https://msgid.link/r/TYSPR04MB8429D62DFDB6727866ECF1DEC55A2@TYSPR04MB8429.apcprd04.prod.outlook.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
snd_soc_card_get_kcontrol() must be holding a read lock on
card->controls_rwsem while walking the controls list.
Compare with snd_ctl_find_numid().
The existing function is renamed snd_soc_card_get_kcontrol_locked()
so that it can be called from contexts that are already holding
card->controls_rwsem (for example, control get/put functions).
There are few direct or indirect callers of
snd_soc_card_get_kcontrol(), and most are safe. Three require
changes, which have been included in this patch:
codecs/cs35l45.c:
cs35l45_activate_ctl() is called from a control put() function so
is changed to call snd_soc_card_get_kcontrol_locked().
codecs/cs35l56.c:
cs35l56_sync_asp1_mixer_widgets_with_firmware() is called from
control get()/put() functions so is changed to call
snd_soc_card_get_kcontrol_locked().
fsl/fsl_xcvr.c:
fsl_xcvr_activate_ctl() is called from three places, one of which
already holds card->controls_rwsem:
1. fsl_xcvr_mode_put(), a control put function, which will
already be holding card->controls_rwsem.
2. fsl_xcvr_startup(), a DAI startup function.
3. fsl_xcvr_shutdown(), a DAI shutdown function.
To fix this, fsl_xcvr_activate_ctl() has been changed to call
snd_soc_card_get_kcontrol_locked() so that it is safe to call
directly from fsl_xcvr_mode_put().
The fsl_xcvr_startup() and fsl_xcvr_shutdown() functions have been
changed to take a read lock on card->controls_rsem() around calls
to fsl_xcvr_activate_ctl(). While this is not very elegant, it
keeps the change small, to avoid this patch creating a large
collateral churn in fsl/fsl_xcvr.c.
Analysis of other callers of snd_soc_card_get_kcontrol() is that
they do not need any changes, they are not holding card->controls_rwsem
when they call snd_soc_card_get_kcontrol().
Direct callers of snd_soc_card_get_kcontrol():
fsl/fsl_spdif.c: fsl_spdif_dai_probe() - DAI probe function
fsl/fsl_micfil.c: voice_detected_fn() - IRQ handler
Indirect callers via soc_component_notify_control():
codecs/cs42l43: cs42l43_mic_shutter() - IRQ handler
codecs/cs42l43: cs42l43_spk_shutter() - IRQ handler
codecs/ak4118.c: ak4118_irq_handler() - IRQ handler
codecs/wm_adsp.c: wm_adsp_write_ctl() - not currently used
Indirect callers via snd_soc_limit_volume():
qcom/sc8280xp.c: sc8280xp_snd_init() - DAIlink init function
ti/rx51.c: rx51_aic34_init() - DAI init function
I don't have hardware to test the fsl/*, qcom/sc828xp.c, ti/rx51.c
and ak4118.c changes.
Backport note:
The fsl/, qcom/, cs35l45, cs35l56 and cs42l43 callers were added
since the Fixes commit so won't all be present on older kernels.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 209c6cdfd283 ("ASoC: soc-card: move snd_soc_card_get_kcontrol() to soc-card")
Link: https://lore.kernel.org/r/20240221123710.690224-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In the case where __lpass_get_dmactl_handle is called and the driver
id dai_id is invalid the pointer dmactl is not being assigned a value,
and dmactl contains a garbage value since it has not been initialized
and so the null check may not work. Fix this to initialize dmactl to
NULL. One could argue that modern compilers will set this to zero, but
it is useful to keep this initialized as per the same way in functions
__lpass_platform_codec_intf_init and lpass_cdc_dma_daiops_hw_params.
Cleans up clang scan build warning:
sound/soc/qcom/lpass-cdc-dma.c:275:7: warning: Branch condition
evaluates to a garbage value [core.uninitialized.Branch]
Fixes: b81af585ea54 ("ASoC: qcom: Add lpass CPU driver for codec dma control")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://msgid.link/r/20240221134804.3475989-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The driver must write 0 to HALO_STATE before sending the SYSTEM_RESET
command to the firmware.
HALO_STATE is in DSP memory, which is preserved across a soft reset.
The SYSTEM_RESET command does not change the value of HALO_STATE.
There is period of time while the CS35L56 is resetting, before the
firmware has started to boot, where a read of HALO_STATE will return
the value it had before the SYSTEM_RESET. If the driver does not
clear HALO_STATE, this would return BOOT_DONE status even though the
firmware has not booted.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 8a731fd37f8b ("ASoC: cs35l56: Move utility functions to shared file")
Link: https://msgid.link/r/20240216140535.1434933-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The ACPI in some SoundWire laptops has a spk-id-gpios property but
it points to the wrong Device node. This patch adds a workaround to
try to get the GPIO directly from the correct Device node.
If the attempt to get the GPIOs from the property fails, the workaround
looks for the SDCA node "AF01", which is where the GpioIo resource is
defined. If this exists, a spk-id-gpios mapping is added to that node
and then the GPIO is got from that node using the property.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://msgid.link/r/20240209111840.1543630-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
Hi,
Align the IPC4 firmware path/name and the topology path to the documentation:
default_fw_path: intel/sof-ipc4/{platform_name}
default_lib_path: intel/sof-ipc4-lib/{platform_name}
default_tplg_path: intel/sof-ipc4-tplg
default_fw_filename: sof-{platform_name}.ri
Tiger Lake and Lunar Lake support is not yet available via the official
firmware release, the paths can be changed now to avoid misalignment in the
future.
Regards,
Peter
---
Peter Ujfalusi (2):
ASoC: SOF: Intel: pci-tgl: Change the default paths and firmware names
ASoC: SOF: Intel: pci-lnl: Change the topology path to
intel/sof-ipc4-tplg
sound/soc/sof/intel/pci-lnl.c | 2 +-
sound/soc/sof/intel/pci-tgl.c | 64 +++++++++++++++++------------------
2 files changed, 33 insertions(+), 33 deletions(-)
--
2.43.0
|
|
commit 74ad8ed65121 ("ASoC: SOF: ipc3: Implement rx_msg IPC ops")
introduced a new allocation before the upper bounds check in
do_rx_work. As a result A DSP can cause bad allocations if spewing
garbage.
Fixes: 74ad8ed65121 ("ASoC: SOF: ipc3: Implement rx_msg IPC ops")
Reported-by: Tim Van Patten <timvp@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://msgid.link/r/20240213123834.4827-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When the system is suspended while audio is active, the
sof_ipc4_pcm_hw_free() is invoked to reset the pipelines since during
suspend the DSP is turned off, streams will be re-started after resume.
If the firmware crashes during while audio is running (or when we reset
the stream before suspend) then the sof_ipc4_set_multi_pipeline_state()
will fail with IPC error and the state change is interrupted.
This will cause misalignment between the kernel and firmware state on next
DSP boot resulting errors returned by firmware for IPC messages, eventually
failing the audio resume.
On stream close the errors are ignored so the kernel state will be
corrected on the next DSP boot, so the second boot after the DSP panic.
If sof_ipc4_trigger_pipelines() is called from sof_ipc4_pcm_hw_free() then
state parameter is SOF_IPC4_PIPE_RESET and only in this case.
Treat a forced pipeline reset similarly to how we treat a pcm_free by
ignoring error on state sending to allow the kernel's state to be
consistent with the state the firmware will have after the next boot.
Link: https://github.com/thesofproject/sof/issues/8721
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://msgid.link/r/20240213115233.15716-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
clang-16 points out a mismatch in function types that was hidden
by a typecast:
sound/soc/qcom/qdsp6/q6apm-dai.c:355:38: error: cast from 'void (*)(uint32_t, uint32_t, uint32_t *, void *)' (aka 'void (*)(unsigned int, unsigned int, unsigned int *, void *)') to 'q6apm_cb' (aka 'void (*)(unsigned int, unsigned int, void *, void *)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
355 | prtd->graph = q6apm_graph_open(dev, (q6apm_cb)event_handler, prtd, graph_id);
sound/soc/qcom/qdsp6/q6apm-dai.c:499:38: error: cast from 'void (*)(uint32_t, uint32_t, uint32_t *, void *)' (aka 'void (*)(unsigned int, unsigned int, unsigned int *, void *)') to 'q6apm_cb' (aka 'void (*)(unsigned int, unsigned int, void *, void *)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
499 | prtd->graph = q6apm_graph_open(dev, (q6apm_cb)event_handler_compr, prtd, graph_id);
The only difference here is the 'payload' argument, which is not even
used in this function, so just fix its type and remove the cast.
Fixes: 88b60bf047fd ("ASoC: q6dsp: q6apm-dai: Add open/free compress DAI callbacks")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://msgid.link/r/20240213101105.459402-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The firmware release which going to introduce support for Lunar Lake will
use the documented default topology directory for IPC4:
intel/sof-ipc4-tplg
Change the default path accordingly before sof-bin (sof-firmware) release
includes Lunar Lake firmware and topologies.
Link: https://github.com/thesofproject/sof-docs/blob/master/getting_started/intel_debug/introduction.rst#2-topology-file
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Mengdong Lin <mengdong.lin@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Chao Song <chao.song@linux.intel.com>
Link: https://msgid.link/r/20240213080418.21256-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The currently used paths and firmware name reflects the reference firmware
convention:
default_fw_path: intel/avs/{platform_name}
default_lib_path: intel/avs-lib/{platform_name}
default_tplg_path: intel/avs-tplg
default_fw_filename: dsp_basefw.bin
The SOF supports building the firmware for cAVS2.5 platforms using IPC4 and
it is the preferred IPC4 implementation to be used on these devices.
Change the paths and firmware names to reflect this:
default_fw_path: intel/sof-ipc4/{platform_name}
default_lib_path: intel/sof-ipc4-lib/{platform_name}
default_tplg_path: intel/sof-ipc4-tplg
default_fw_filename: sof-{platform_name}.ri
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240213080418.21256-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Like many other models, the Lenovo 82UU (Yoga Slim 7 Pro 14ARH7)
needs a quirk entry for the internal microphone to function.
Signed-off-by: Attila Tőkés <attitokes@gmail.com>
Link: https://msgid.link/r/20240210193638.144028-1-attitokes@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The MeeGoPad T8 uses the standard rt5645 jd_mode=3 setting for jack-detect,
but the used jack connector outputs an inverted jack-detect signal.
Add a DMI quirk for this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://msgid.link/r/20240211212736.179605-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The DMI strings used for the LattePanda board DMI quirks are very generic.
Using the dmidecode database from https://linux-hardware.org/ shows
that the chosen DMI strings also match the following 2 laptops
which also have a rt5645 codec:
Insignia NS-P11W7100 https://linux-hardware.org/?computer=E092FFF8BA04
Insignia NS-P10W8100 https://linux-hardware.org/?computer=AFB6C0BF7934
All 4 hw revisions of the LattePanda board have "S70CR" in their BIOS
version DMI strings:
DF-BI-7-S70CR100-*
DF-BI-7-S70CR110-*
DF-BI-7-S70CR200-*
LP-BS-7-S70CR700-*
See e.g. https://linux-hardware.org/?computer=D98250A817C0
Add a partial (non exact) DMI match on this string to make the LattePanda
board DMI match more precise to avoid false-positive matches.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://msgid.link/r/20240211212736.179605-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Hans de Goede <hdegoede@redhat.com>:
While testing 6.8 on a Bay Trail device with a ALC5640 codec
I noticed a regression in 6.8 which causes a NULL pointer deref
in probe().
All BYT/CHT Intel machine drivers are affected. Patch 1/2 of
this series fixes all of them.
Patch 2/2 adds some small cleanups to cht_bsw_rt5645.c for
issues which I noticed while working on 1/2.
|
|
A recent change in acp_irq_thread() was meant to address a potential race
condition while trying to acquire the hardware semaphore responsible for
the synchronization between firmware and host IPC interrupts.
This resulted in an improper use of the IPC spinlock, causing normal
kernel memory allocations (which may sleep) inside atomic contexts:
1707255557.133976 kernel: BUG: sleeping function called from invalid context at include/linux/sched/mm.h:315
...
1707255557.134757 kernel: sof_ipc3_rx_msg+0x70/0x130 [snd_sof]
1707255557.134793 kernel: acp_sof_ipc_irq_thread+0x1e0/0x550 [snd_sof_amd_acp]
1707255557.134855 kernel: acp_irq_thread+0xa3/0x130 [snd_sof_amd_acp]
1707255557.134904 kernel: ? irq_thread+0xb5/0x1e0
1707255557.134947 kernel: ? __pfx_irq_thread_fn+0x10/0x10
1707255557.134985 kernel: irq_thread_fn+0x23/0x60
Moreover, there are attempts to lock a mutex from the same atomic
context:
1707255557.136357 kernel: =============================
1707255557.136393 kernel: [ BUG: Invalid wait context ]
1707255557.136413 kernel: 6.8.0-rc3-next-20240206-audio-next #9 Tainted: G W
1707255557.136432 kernel: -----------------------------
1707255557.136451 kernel: irq/66-AudioDSP/502 is trying to lock:
1707255557.136470 kernel: ffff965152f26af8 (&sb->s_type->i_mutex_key#2){+.+.}-{3:3}, at: start_creating.part.0+0x5f/0x180
...
1707255557.137429 kernel: start_creating.part.0+0x5f/0x180
1707255557.137457 kernel: __debugfs_create_file+0x61/0x210
1707255557.137475 kernel: snd_sof_debugfs_io_item+0x75/0xc0 [snd_sof]
1707255557.137494 kernel: sof_ipc3_do_rx_work+0x7cf/0x9f0 [snd_sof]
1707255557.137513 kernel: sof_ipc3_rx_msg+0xb3/0x130 [snd_sof]
1707255557.137532 kernel: acp_sof_ipc_irq_thread+0x1e0/0x550 [snd_sof_amd_acp]
1707255557.137551 kernel: acp_irq_thread+0xa3/0x130 [snd_sof_amd_acp]
Fix the issues by reducing the lock scope in acp_irq_thread(), so that
it guards only the hardware semaphore acquiring attempt. Additionally,
restore the initial locking in acp_sof_ipc_irq_thread() to synchronize
the handling of immediate replies from DSP core.
Fixes: 802134c8c2c8 ("ASoC: SOF: amd: Refactor spinlock_irq(&sdev->ipc_lock) sequence in irq_handler")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20240208234315.2182048-1-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There is a path in rt5645_jack_detect_work(), where rt5645->jd_mutex
is left locked forever. That may lead to deadlock
when rt5645_jack_detect_work() is called for the second time.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: cdba4301adda ("ASoC: rt5650: add mutex to avoid the jack detection failure")
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Link: https://lore.kernel.org/r/1707645514-21196-1-git-send-email-khoroshilov@ispras.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
4 fixes / cleanups to the rt5645 mc driver's codec_name handling:
1. In the for loop looking for the dai_index for the codec, replace
card->dai_link[i] with cht_dailink[i]. The for loop already uses
ARRAY_SIZE(cht_dailink) as bound and card->dai_link is just a pointer to
cht_dailink using card->dai_link only obfuscates that cht_dailink is being
modified directly rather then say a copy of cht_dailink. Using
cht_dailink[i] also makes the code consistent with other machine drivers.
2. Don't set cht_dailink[dai_index].codecs->name in the for loop,
this immediately gets overridden using acpi_dev_name(adev) directly
below the loop.
3. Add a missing break to the loop.
4. Remove the now no longer used (only set, never read) codec_name field
from struct cht_mc_private.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240210134400.24913-3-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Since commit 13f58267cda3 ("ASoC: soc.h: don't create dummy Component
via COMP_DUMMY()") dummy snd_soc_dai_link.codecs entries no longer
have a name set.
This means that when looking for the codec dai_link the machine
driver can no longer unconditionally run strcmp() on
snd_soc_dai_link.codecs[0].name since this may now be NULL.
Add a check for snd_soc_dai_link.codecs[0].name being NULL to all
BYT/CHT machine drivers to avoid NULL pointer dereferences in
their probe() methods.
Fixes: 13f58267cda3 ("ASoC: soc.h: don't create dummy Component via COMP_DUMMY()")
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240210134400.24913-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The driver never uses the IRQ1_CFG register so there's no need to provide
a default value. It's set as a readable register only for debugging
through the regmap registers file.
A system-specific firmware could overwrite this register with a non-default
value. Therefore the driver can't hardcode what the initial value actually
is. As the register is only for debugging the value can be left unknown
until someone wants to read it through debugfs.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240209145700.1555950-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
With the change in the widget free logic to power down the cores only
when the scheduler widgets are freed, we need to ensure that the
scheduler widget is freed only after all the widgets associated with the
scheduler are freed. This is to ensure that the secondary core that the
scheduler is scheduled to run on is kept powered on until all widgets
that need them are in use. While this works well for dynamic pipelines,
in the case of static pipelines the current logic does not take this into
account and frees all widgets in the order they occur in the
widget_list. So, modify this to ensure that the scheduler widgets are freed
only after all other types of widgets in the widget_list are freed.
Link: https://github.com/thesofproject/linux/issues/4807
Fixes: 31ed8da1c8e5 ("ASoC: SOF: sof-audio: Modify logic for enabling/disabling topology cores")
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20240208133432.1688-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Rewrite the handling of ASP1 TX mixer mux initialization to prevent a
deadlock during component_remove().
The firmware can overwrite the ASP1 TX mixer registers with
system-specific settings. This is mainly for hardware that uses the
ASP as a chip-to-chip link controlled by the firmware. Because of this
the driver cannot know the starting state of the ASP1 mixer muxes until
the firmware has been downloaded and rebooted.
The original workaround for this was to queue a work function from the
dsp_work() job. This work then read the register values (populating the
regmap cache the first time around) and then called
snd_soc_dapm_mux_update_power(). The problem with this is that it was
ultimately triggered by cs35l56_component_probe() queueing dsp_work,
which meant that it would be running in parallel with the rest of the
ASoC component and card initialization. To prevent accessing DAPM before
it was fully initialized the work function took the card mutex. But this
would deadlock if cs35l56_component_remove() was called before the work job
had completed, because ASoC calls component_remove() with the card mutex
held.
This new version removes the work function. Instead the regmap cache and
DAPM mux widgets are initialized the first time any of the associated ALSA
controls is read or written.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 07f7d6e7a124 ("ASoC: cs35l56: Fix for initializing ASP1 mixer registers")
Link: https://lore.kernel.org/r/20240208123742.1278104-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In case TDM is set in topology on SSP0, parser will overwrite vindex
value, because it only checks if port is set. Fix this by checking whole
field value.
Fixes: e6d50e474e45 ("ASoC: Intel: avs: Improve topology parsing of dynamic strings")
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20240207112624.2132821-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The IRQ should be disabled whilst entering and exiting system suspend to
avoid the IRQ handler being called whilst the PM runtime is disabled.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240206113850.719888-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
As devm_pm_runtime_enable can fail due to memory allocations, it is
best to handle the error.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240206113850.719888-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The laptop requires a quirk ID to enable its internal microphone. Add
it to the DMI quirk table.
Reported-by: Stanislav Petrov <stanislav.i.petrov@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=216925
Cc: stable@vger.kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20240205214853.2689-1-mario.limonciello@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
