summaryrefslogtreecommitdiff
path: root/sound/usb
AgeCommit message (Collapse)AuthorFilesLines
2024-01-15ALSA: scarlett2: Fix yet more -Wformat-truncation warningsTakashi Iwai1-21/+21
The recent code change introduced a few false-positive compile warnings with -Wformat-trucation again. Suppress them by replacing snprintf() with scnprintf(). Fixes: 0a995e38dc44 ("ALSA: scarlett2: Add support for software-controllable input gain") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202401062344.AzZCYlpa-lkp@intel.com/ Link: https://lore.kernel.org/r/20240112171000.31855-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: scarlett2: Add PCM Input Switch for Solo Gen 4Geoffrey D. Bennett1-0/+151
When the Direct button on the Solo Gen 4 is held for 3 seconds, the PCM 1 and 2 inputs are toggled between DSP Outputs 1 and 2, and Mixer Outputs E and F. This patch adds the corresponding ALSA control. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/8c67c6131c459588ac4edab11e1fbc40a8297328.1703612638.git.g@b4.vu
2023-12-29ALSA: scarlett2: Add support for Solo, 2i2, and 4i4 Gen 4Geoffrey D. Bennett2-15/+349
Add new Focusrite Scarlett Gen 4 USB IDs, notification arrays, config sets, and device info data. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/b33526d3b7a56bb2c86aa4eb2137a415bd23f1ce.1703612638.git.g@b4.vu
2023-12-29ALSA: scarlett2: Add R/O headphone volume controlGeoffrey D. Bennett1-1/+81
The Scarlett 4i4 Gen 4 adds a R/O headphone volume control in addition to a R/O master volume control (which is already supported). Mark the new scarlett2_notify_volume() function with __always_unused until it gets used when the Gen 4 notification callback function arrays are added. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/bd4a76da157f8cc3fbfa02eba96d02bdb86817c5.1703612638.git.g@b4.vu
2023-12-29ALSA: scarlett2: Add minimum firmware version checkGeoffrey D. Bennett1-5/+66
Early firmware for the Scarlett Gen 4 devices has sufficient differences that it is better to enforce a minimum firmware version than to try and work around those differences. Add a minimum firmware version field to the device info struct, and display a message if the firmware version is too old. Only create the Firmware Version and MSD (optional) controls in this case. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/5455a7e54bda81556066abd7f761b10e9c5f8a16.1703612638.git.g@b4.vu
2023-12-29ALSA: scarlett2: Rename DSP mux channelsGeoffrey D. Bennett1-6/+26
The DSP mux channels are of type SCARLETT2_PORT_TYPE_MIX so the ALSA controls would refer to them "Mix X" and "Mixer Input X". This patch fixes them to be called "DSP X" and "DSP Input X". Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/2d91d0a74d5c7f6179e950bed2c80a4498d16649.1703612638.git.g@b4.vu
2023-12-29ALSA: scarlett2: Add support for DSP mux channelsGeoffrey D. Bennett1-3/+11
The DSP mux channels in the Scarlett 4th Gen appear as SCARLETT2_PORT_TYPE_MIX ports but do not have corresponding mixer controls. Add a dsp_count option to the device info struct to exclude those DSP channels from the num_mix_in/num_mix_out counts. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/b78bdb1a7624d55783f5bf0e1ffbfa47a9e9a800.1703612638.git.g@b4.vu
2023-12-29ALSA: scarlett2: Add support for custom Gen 4 Direct Monitor mixesGeoffrey D. Bennett1-4/+141
The mixes used by Direct Monitor feature on the Scarlett 4th Gen Solo and 2i2 interfaces are configurable. This patch adds ALSA controls for the gains which are copied to the mixer when Direct Monitor is enabled. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/96282a805b45f04560e5923d170745363906b7f3.1703612638.git.g@b4.vu
2023-12-29ALSA: scarlett2: Handle Gen 4 Direct Monitor mix updatesGeoffrey D. Bennett1-0/+12
When the Direct Monitor feature on the Scarlett 4th Gen Solo and 2i2 interfaces is used, the Mix A and B gains are updated by the interface. This patch calls snd_ctl_notify() for the ALSA mix controls when a Direct Monitor notification is received. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/713d032e343e0547212368919bef17d6fa1c9d29.1703612638.git.g@b4.vu
2023-12-29ALSA: scarlett2: Store mix_ctls for Gen 4 Direct MonitorGeoffrey D. Bennett1-8/+42
The Scarlett 4th Gen small interfaces have a software-controllable mixer like the large 2nd and 3rd Gen interfaces do. Pressing the "Direct" button on the interface updates the mixer controls, which this driver hasn't needed to deal with previously. This commit stores the ALSA mixer controls, and adds a mix_updated flag so that the controls can be updated when a notification is received. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/3ba27c60230511b80b0fa75727551ea70f17d829.1703612638.git.g@b4.vu
2023-12-29ALSA: scarlett2: Add power status controlGeoffrey D. Bennett1-0/+123
Add a control to retrieve the power status from the interface (bus-powered, external-powered, or insufficient power). Mark the new scarlett2_notify_power_status() function with __always_unused until it gets used when the Gen 4 notification callback function arrays are added. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/d9806bc41adc45b1c19749562fec7765ba24351d.1703612638.git.g@b4.vu
2023-12-29ALSA: scarlett2: Disable autogain during phantom power state changeGeoffrey D. Bennett1-10/+113
When phantom power is enabled or disabled, the autogain control cannot be enabled until the interface has signalled that the change is complete and the input is unmuted. Update those controls to be read-only during this time. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/f49f7bf9358e1f20713d95d407d8d6a436859877.1703612638.git.g@b4.vu
2023-12-29ALSA: scarlett2: Disable input controls while autogain is runningGeoffrey D. Bennett1-25/+273
While the autogain function is running, the other input controls (select, link, gain, safe, level, air, and phantom) can't be modified. Update those controls to be read-only during this time. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/ad13bacae77860de8c2d7c89f6ec2a1ee104e65f.1703612638.git.g@b4.vu
2023-12-29ALSA: scarlett2: Minor refactor MSD mode checkGeoffrey D. Bennett1-1/+4
Create local variable for storing private data pointer in snd_scarlett2_controls_create(). It's currently only used for checking msd_switch, but it will be used again. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/ab50939dca0fdc5fa3493fc8eee3a2fdefffa62d.1703612638.git.g@b4.vu
2023-12-29ALSA: scarlett2: Add support for software-controllable input gainGeoffrey D. Bennett1-1/+795
Some devices in the Scarlett Gen 4 series have support for software-controllable input gain. Along with this comes a channel select option, an auto-gain feature, "safe" mode, and linking two channels into a stereo pair. Mark the new scarlett2_notify_input_*() functions with __always_unused until they get used when the Gen 4 notification callback function arrays are added. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/fc39e80bb39863dd1579d342097203942b4f3034.1703612638.git.g@b4.vu
2023-12-29ALSA: scarlett2: Add support for Air Presence + Drive optionGeoffrey D. Bennett1-10/+36
Extend the existing "air" option support from Scarlett Gen 3, which had two states (off/on), to accommodate Scarlett Gen 4's new state: Presence + Drive. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/a9ccda7222842a72e4ce7aa258614ff45248bb16.1703612638.git.g@b4.vu
2023-12-29ALSA: scarlett2: Allow for controls with a "mute mode"Geoffrey D. Bennett1-3/+28
Gen 2/3 interfaces would only use 0/1 values for input level and phantom power switch controls. Gen 4 interfaces use the second bit to indicate that the state should be changed (or is changing), and the input is to be muted (or is muted) while that happens. Add a "mute" flag to config items to enable this behaviour for the level/phantom controls. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/f603cd16079c97fad910087e0302828a289d1c15.1703612638.git.g@b4.vu
2023-12-29ALSA: scarlett2: Add support for Gen 4 style parametersGeoffrey D. Bennett1-5/+48
Writing Scarlett Gen 4 parameters differs from Gen 2 and Gen 3: - the values are written into a shared write location - the values are only byte-sized - the read locations now extend beyond 0xFF - a separate NVRAM save step is no longer required This patch implements that alternate write style, triggered by setting the config item size field to zero. The write address is specified through a new config set field gen4_write_addr. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/1624e6d8a0c629c3bdfe53825b16e8b589724fc4.1703612638.git.g@b4.vu
2023-12-29ALSA: scarlett2: Add support for air/phantom control on input 2Geoffrey D. Bennett1-3/+12
The Focusrite Scarlett Gen 4 Solo has Air and Phantom Power controls on analogue input #2 (the Gen 3 Solo had these controls on analogue input #1). Add air_input_first and phantom_first device info options to cater for this. These options are similar to the level_input_first option that was added for the Gen 3 Solo, but these new options do not require adjusting the index of the control. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/19511f18895b8c094985a4a5691fbc1dc028c108.1703612638.git.g@b4.vu
2023-12-29ALSA: scarlett2: Remove repeated elem->head.mixer referencesGeoffrey D. Bennett1-3/+4
Use a local variable *mixer rather than repeating elem->header.mixer in scarlett2_direct_monitor_ctl_get() and scarlett2_meter_ctl_get(). Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/b21bacf4056366e10e01077e224d2b4970fdfe31.1703612638.git.g@b4.vu
2023-12-29ALSA: scarlett2: Split direct_monitor out from monitor_otherGeoffrey D. Bennett1-131/+158
The notification value for monitor_other on the large interfaces is the same as the notification value for direct_monitor on the 3rd Gen small interfaces. Add a separate scarlett3a_notifications array and split out the direct_monitor handling. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Link: https://lore.kernel.org/r/9b56a483e3e9c1447684f18239a88652c1f01445.1703444932.git.g@b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: scarlett2: Split input_other into level/pad/air/phantomGeoffrey D. Bennett1-58/+140
Gen 2/3 devices have a single notification value for "input other" changes. Gen 4 has separate notification values for level, pad, air, and phantom power changes. Therefore, split the input_other_updated field and the scarlett2_update_input_other() function into the four components so that they can be handled separately later. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Link: https://lore.kernel.org/r/a1a1d190659d56689792aa20ceeb53a6175171ad.1703444932.git.g@b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: scarlett2: Rename db_scale_scarlett2_gain to volumeGeoffrey D. Bennett1-3/+3
db_scale_scarlett2_gain is the TLV for the output volume controls. Gen 4 has software-controllable input gain controls, so rename this to db_scale_scarlett2_volume so we can use that name for the inputs. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Link: https://lore.kernel.org/r/d544ec7cc5d5a849da104a5a78b17f61f50657c1.1703444932.git.g@b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: scarlett2: Add #define for SCARLETT2_MIX_MAXGeoffrey D. Bennett1-1/+4
Add a #define for SCARLETT2_MIX_MAX (max of mixer inputs * outputs) as that will be used again soon. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Link: https://lore.kernel.org/r/83cec5ccd75f0db2bd061a76d31a7023d26300c1.1703444932.git.g@b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: scarlett2: Add scarlett2_mixer_value_to_db()Geoffrey D. Bennett1-11/+17
Refactor scarlett2_usb_get_mix(), moving the scarlett2_mixer_values[] lookup into scarlett2_mixer_value_to_db(). Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Link: https://lore.kernel.org/r/7adf869852aba2819fddb850b0ea8df5f7d73931.1703444932.git.g@b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: scarlett2: Allow for interfaces without per-channel volumeGeoffrey D. Bennett1-28/+40
Currently-supported interfaces with a mixer have per-channel volume controls, but this changes in Gen 4. Add a check so that the Playback Volume and associated controls don't get created unless the SCARLETT2_CONFIG_LINE_OUT_VOLUME config item is present. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Link: https://lore.kernel.org/r/30f68cb311e27f2cc1351cb846218f7248a90263.1703444932.git.g@b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: scarlett2: Remove line_out_hw_vol device info entryGeoffrey D. Bennett1-49/+96
By splitting config set gen2 into gen2a/b (for 6i6/18i8 vs 18i20), and gen3b into gen3b/c (for 4i4/8i6 vs 18i8/18i20), we can use scarlett2_has_config_item() instead of the per-device line_out_hw_vol. As Gen 4 has a master volume control but no SW/HW switches, check for both SCARLETT2_CONFIG_MASTER_VOLUME and SCARLETT2_CONFIG_SW_HW_SWITCH as needed, even though for Gen 2 and Gen 3 the former implies the latter. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Link: https://lore.kernel.org/r/307c4f8d6d2e034f3e386b51d72a39d77c8a9fce.1703444932.git.g@b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: scarlett2: Split dim_mute_update from vol_updatedGeoffrey D. Bennett1-21/+42
Scarlett Gen 2 and Gen 3 devices combine volume and dim/mute notifications. The Scarlett 4i4 Gen 4 has volume change notification but no dim/mute control so split dim_mute_update out from vol_update. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Link: https://lore.kernel.org/r/bf63f48bcc68ae739bd9948c8ee2f87ee7af22a2.1703444932.git.g@b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: scarlett2: Remove struct scarlett2_usb_volume_statusGeoffrey D. Bennett1-69/+61
The struct scarlett2_usb_volume_status matched the config space layout of a few volume controls that could be read together and were in fixed locations between Gen 2 and Gen 3 devices. Gen 4 devices have removed, moved, and new related controls, so this needs to be cleaned up. By adding SCARLETT2_CONFIG_MASTER_VOLUME (the only config item that didn't already have its own entry, because it is read-only), we can remove: - struct scarlett2_usb_volume_state, - #define SCARLETT2_USB_VOLUME_STATUS_OFFSET, and - scarlett2_usb_get_volume_status() and replace with calls to scarlett2_usb_get_config(). Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Link: https://lore.kernel.org/r/2ee88994857246bf89fab8e62ac279f3bcf96192.1703444932.git.g@b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: scarlett2: Refactor common port_count lookupsGeoffrey D. Bennett1-72/+35
Rather than looking up the analogue and mixer I/O counts repeatedly in info->port_count[SCARLETT2_PORT_TYPE_*][SCARLETT2_PORT_*], save those numbers in private variables. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Link: https://lore.kernel.org/r/db0a5b56bdff476e2e31ad8e5ee15008314412b7.1703444932.git.g@b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: scarlett2: Change num_mux_* from int to u8Geoffrey D. Bennett1-2/+2
num_mux_srcs and num_mux_dsts will fit into a u8, so change the type. More similar counts are coming soon. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Link: https://lore.kernel.org/r/886fbd9ce7f06b13c6dbf36f64e6b2d107d16a83.1703444932.git.g@b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: scarlett2: Parameterise notificationsGeoffrey D. Bennett1-17/+45
The notification values were previously #define'd, and checked with a series of if() statements calling functions. Replace with an array of masks/callback function pointers, and a pointer to that array in the scarlett2_config_set definitions. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Link: https://lore.kernel.org/r/0ee2a3786f9d30c89eeae59d7e933424e8f39162.1703444932.git.g@b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: scarlett2: Formatting fixesGeoffrey D. Bennett1-14/+8
Add missing blank line before comment. For consistency with other functions that have few parameters, move the parameters onto the same line as the function name. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Link: https://lore.kernel.org/r/72be568b02eea12621b0c4a96f8e8cc65b0c13c0.1703444932.git.g@b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: scarlett2: Refactor scarlett2_config_save()Geoffrey D. Bennett1-21/+19
Use the new scarlett2_usb_activate_config() helper function rather than preparing the request manually and calling scarlett2_usb(). Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Link: https://lore.kernel.org/r/bbc733dc081f311fb3167e81b15cd76324aa6307.1703444932.git.g@b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: scarlett2: Refactor scarlett2_usb_set_config()Geoffrey D. Bennett1-16/+41
Pull out common code from scarlett2_usb_set_config() and create scarlett2_usb_set_data() and scarlett2_usb_activate_config(). Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Link: https://lore.kernel.org/r/257eca0b07708339133f916930e388057d116eb8.1703444932.git.g@b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: scarlett2: Add check for config_item presenceGeoffrey D. Bennett1-0/+12
Update scarlett2_usb_get_config() and scarlett2_usb_set_config() to make sure that the config_item_num is valid for the device. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Link: https://lore.kernel.org/r/b0572b23291ffd1b208f21d298adaf4d9f1fe4bc.1703444932.git.g@b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: scarlett2: Remove scarlett2_config_sets arrayGeoffrey D. Bennett1-188/+173
Replace array index into config sets with a pointer to a config set. Copy the config_set pointer to the scarlett2_data struct. This simplifies both the definition and use of the config sets. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Link: https://lore.kernel.org/r/61f69519fb6fbb677e066891a3a6771aeeec106d.1703444932.git.g@b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: scarlett2: Add config set structGeoffrey D. Bennett1-78/+89
Add struct scarlett2_config_set so that data which is common to all devices in a config set can be stored there rather than in the model-specific data. Accordingly, rename scarlett2_config_items[] to scarlett2_config_sets[]. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Link: https://lore.kernel.org/r/bfdb04cd6239af9a8c26a52da0537980f77c0437.1703444932.git.g@b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: scarlett2: Check presence of mixer using mux_assignmentGeoffrey D. Bennett1-3/+9
Currently the presence of a mixer is determined by checking if the device uses the GEN_3A config set. Add scarlett2_has_mixer() function which checks for the presence of mux_assignment entries instead. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Link: https://lore.kernel.org/r/ef6f4d360c2fe682ab65f83cccbe5be66ccc6296.1703444932.git.g@b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: scarlett2: Check for phantom persistence config itemGeoffrey D. Bennett1-6/+12
Allow for the phantom persistence config item to not exist. This is needed for the Scarlett Gen 4 series. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Link: https://lore.kernel.org/r/3ccaf8069280827bd6c44f103fcb770bd50b7e2e.1703444932.git.g@b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: scarlett2: Infer standalone switch from config itemsGeoffrey D. Bennett1-6/+10
Rather than assuming the standalone switch is present for all devices with a mixer, instead check for the presence of the SCARLETT2_CONFIG_STANDALONE_SWITCH config item. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Link: https://lore.kernel.org/r/59c30885b02d65feaab2c338cf46889d72d01813.1703444932.git.g@b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: scarlett2: Infer has_msd_mode from config itemsGeoffrey D. Bennett1-15/+15
Rather than storing has_msd_mode in the per-device structure, infer this from the presence of the SCARLETT2_CONFIG_MSD_SWITCH entry in the device's configuration set. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Link: https://lore.kernel.org/r/ecbf3740e6b30a245333528ae4c504f37a9bc6bf.1703444932.git.g@b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: scarlett2: Simplify enums by removing explicit valuesGeoffrey D. Bennett1-38/+38
This commit removes the explicit integer assignments from the enums. The actual values matter little, and not assigning explicit values makes it easier to modify the longer lists in the future. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Link: https://lore.kernel.org/r/67f0f1bb8b90d7c76dfe7062d22d33bbde19cf93.1703444932.git.g@b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: scarlett2: Add support for uploading new firmwareGeoffrey D. Bennett1-3/+93
Add ops.write to the hwdep interface. Once the upgrade firmware flash segment has been erased, writes to the hwdep fd are permitted, and translated to SCARLETT2_USB_WRITE_SEGMENT commands to the device. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Link: https://lore.kernel.org/r/ZY65S0ojShSNSeRQ@m.b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: scarlett2: Add ioctl commands to erase flash segmentsGeoffrey D. Bennett1-6/+422
Add ioctls: - SCARLETT2_IOCTL_SELECT_FLASH_SEGMENT - SCARLETT2_IOCTL_ERASE_FLASH_SEGMENT - SCARLETT2_IOCTL_GET_ERASE_PROGRESS The settings or the firmware flash segment can be selected and then erased (asynchronous operation), and the erase progress can be monitored. If the erase progress is not monitored, then subsequent hwdep operations will block until the erase is complete. Once the erase is started, ALSA controls that communicate with the device will all return -EBUSY, and the device must be rebooted. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Link: https://lore.kernel.org/r/227409adb672f174bf3db211e9bda016fb4646ea.1703001053.git.g@b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: scarlett2: Add skeleton hwdep/ioctl interfaceGeoffrey D. Bennett1-1/+66
Add skeleton hwdep/ioctl interface, beginning with SCARLETT2_IOCTL_PVERSION and SCARLETT2_IOCTL_REBOOT. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Link: https://lore.kernel.org/r/24ffcd47a8a02ebad3c8b2438104af8f0169164e.1703001053.git.g@b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: scarlett2: Retrieve useful flash segment numbersGeoffrey D. Bennett1-0/+103
Call SCARLETT2_USB_INFO_FLASH and SCARLETT2_USB_INFO_SEGMENT to find the App_Settings and App_Upgrade flash segment numbers, and store them in the scarlett2_data struct. These will be used later to implement reset to factory defaults and firmware upgrade functions. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Link: https://lore.kernel.org/r/70f0108a9cf99b69f7aa920c4bcdb0cf4bf3da98.1703001053.git.g@b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: scarlett2: Add #defines for firmware upgradeGeoffrey D. Bennett1-11/+17
Add #defines for SCARLETT2_USB_* needed for firmware upgrade: reboot, info-flash, info-segment, erase-segment, get-erase, and write-segment. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Link: https://lore.kernel.org/r/3077651c21bc8d4f046c68b79ec387aa16fcc5e4.1703001053.git.g@b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: scarlett2: Add missing mutex lock around get meter levelsGeoffrey D. Bennett1-2/+7
As scarlett2_meter_ctl_get() uses meter_level_map[], the data_mutex should be locked while accessing it. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Fixes: 3473185f31df ("ALSA: scarlett2: Remap Level Meter values") Link: https://lore.kernel.org/r/77e093c27402c83d0730681448fa4f57583349dd.1703001053.git.g@b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: scarlett2: Add clamp() in scarlett2_mixer_ctl_put()Geoffrey D. Bennett1-1/+2
Ensure the value passed to scarlett2_mixer_ctl_put() is between 0 and SCARLETT2_MIXER_MAX_VALUE so we don't attempt to access outside scarlett2_mixer_values[]. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Fixes: 9e4d5c1be21f ("ALSA: usb-audio: Scarlett Gen 2 mixer interface") Link: https://lore.kernel.org/r/3b19fb3da641b587749b85fe1daa1b4e696c0c1b.1703001053.git.g@b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-24 09:20:45 +0300