summaryrefslogtreecommitdiff
path: root/sound
AgeCommit message (Collapse)AuthorFilesLines
2012-06-02Merge tag 'sound-3.5' of ↵Linus Torvalds4-12/+29
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Just a few trivial driver-specific fixes." * tag 'sound-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hdspm - Work around broken DDS value on PCI RME MADI ALSA: usb-audio: fix rate_list memory leak ASoC: fsi: bugfix: ensure dma is terminated ASoC: fsi: bugfix: correct dma area ASoC: fsi: bugfix: enable master clock control on DMA stream ASoC: imx-ssi: Use clk_prepare_enable/clk_disable_unprepare
2012-05-31Merge tag 'asoc-3.5' of ↵Takashi Iwai2-12/+19
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: A few bug fixes for the merge window Small driver-specific updates.
2012-05-31ALSA: hdspm - Work around broken DDS value on PCI RME MADIAdrian Knoth1-0/+7
On PCI RME MADI cards, the PLL register does not contain the proper value, so the calculated system_sample_rate is wrong. In this case, we simply return the cached rate from struct hdspm. Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-05-31ALSA: usb-audio: fix rate_list memory leakClemens Ladisch1-0/+3
The array of sample rates is reallocated every time when opening the PCM device, but was freed only once when unplugging the device. Reported-by: "Alexander E. Patrakov" <patrakov@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-05-30ASoC: fsi: bugfix: ensure dma is terminatedKuninori Morimoto1-0/+2
FSI DMAEngine has to be stopped certainly at the start/stop time. Without this patch, it will include noise on playback. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-30ASoC: fsi: bugfix: correct dma areaKuninori Morimoto1-9/+9
FSI driver is using dma_sync_single_xxx(), but the dma area was not correct. This patch fix it up. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-30ASoC: fsi: bugfix: enable master clock control on DMA streamKuninori Morimoto1-0/+5
DMA stream handler didn't care about master clock. This patch fixes it up. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-28ASoC: imx-ssi: Use clk_prepare_enable/clk_disable_unprepareFabio Estevam1-3/+3
Fix the following kernel crash: ------------[ cut here ]------------ WARNING: at drivers/clk/clk.c:508 __clk_enable+0x9c/0xa8() Modules linked in: Backtrace: [<80011ef4>] (dump_backtrace+0x0/0x10c) from [<803fd48c>] (dump_stack+0x18/0x1c) r7:00000009 r6:000001fc r5:803002ac r4:00000000 [<803fd474>] (dump_stack+0x0/0x1c) from [<8002003c>] (warn_slowpath_common+0x54/0x6c) [<8001ffe8>] (warn_slowpath_common+0x0/0x6c) from [<80020078>] (warn_slowpath_null+0x24/0x2c) r9:00000090 r8:8600e2c0 r7:8605c808 r6:8605c800 r5:8605d780 r4:8600e2c0 [<80020054>] (warn_slowpath_null+0x0/0x2c) from [<803002ac>] (__clk_enable+0x9c/0xa8) [<80300210>] (__clk_enable+0x0/0xa8) from [<803002d0>] (clk_enable+0x18/0x30) r5:8605d780 r4:80000013 [<803002b8>] (clk_enable+0x0/0x30) from [<803247c4>] (imx_ssi_probe+0xa0/0x4f4) r5:8605d780 r4:86174180 [<80324724>] (imx_ssi_probe+0x0/0x4f4) from [<8022b0fc>] (platform_drv_probe+0x20/0x24) [<8022b0dc>] (platform_drv_probe+0x0/0x24) from [<80229c40>] (driver_probe_device+0x80/0x1f0) [<80229bc0>] (driver_probe_device+0x0/0x1f0) from [<80229e44>] (__driver_attach+0x94/0x98) r9:00000090 r8:805b7800 r7:00000000 r6:8605c83c r5:805b1b44 r4:8605c808 [<80229db0>] (__driver_attach+0x0/0x98) from [<8022856c>] (bus_for_each_dev+0x68/0x94) r7:00000000 r6:80229db0 r5:86033eb0 r4:805b1b44 [<80228504>] (bus_for_each_dev+0x0/0x94) from [<80229aa0>] (driver_attach+0x20/0x28) r7:00000000 r6:86174100 r5:8059f6d0 r4:805b1b44 [<80229a80>] (driver_attach+0x0/0x28) from [<80228d50>] (bus_add_driver+0x18c/0x268) [<80228bc4>] (bus_add_driver+0x0/0x268) from [<8022a474>] (driver_register+0x80/0x134) [<8022a3f4>] (driver_register+0x0/0x134) from [<8022b4a4>] (platform_driver_register+0x4c/0x60) r7:00000000 r6:805b7800 r5:00000018 r4:86032000 [<8022b458>] (platform_driver_register+0x0/0x60) from [<80556890>] (imx_ssi_driver_init+0x14/0x1c) [<8055687c>] (imx_ssi_driver_init+0x0/0x1c) from [<8000868c>] (do_one_initcall+0x40/0x194) [<8000864c>] (do_one_initcall+0x0/0x194) from [<8052f3b0>] (kernel_init+0x114/0x1f0) [<8052f29c>] (kernel_init+0x0/0x1f0) from [<8002445c>] (do_exit+0x0/0x788) ---[ end trace d4aa739205917dbb ]--- asoc: mc13783-hifi <-> imx-ssi.0 mapping ok Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-26Merge tag 'clock' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds2-0/+14
Pull arm-soc clock driver changes from Olof Johansson: "The new clock subsystem was merged in linux-3.4 without any users, this now moves the first three platforms over to it: imx, mxs and spear. The series also contains the changes for the clock subsystem itself, since Mike preferred to have it together with the platforms that require these changes, in order to avoid interdependencies and conflicts." Fix up trivial conflicts in arch/arm/mach-kirkwood/common.c (code removed in one branch, added OF support in another) and drivers/dma/imx-sdma.c (independent changes next to each other). * tag 'clock' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (97 commits) clk: Fix CLK_SET_RATE_GATE flag validation in clk_set_rate(). clk: Provide dummy clk_unregister() SPEAr: Update defconfigs SPEAr: Add SMI NOR partition info in dts files SPEAr: Switch to common clock framework SPEAr: Call clk_prepare() before calling clk_enable SPEAr: clk: Add General Purpose Timer Synthesizer clock SPEAr: clk: Add Fractional Synthesizer clock SPEAr: clk: Add Auxiliary Synthesizer clock SPEAr: clk: Add VCO-PLL Synthesizer clock SPEAr: Add DT bindings for SPEAr's timer ARM i.MX: remove now unused clock files ARM: i.MX6: implement clocks using common clock framework ARM i.MX35: implement clocks using common clock framework ARM i.MX5: implement clocks using common clock framework ARM: Kirkwood: Replace clock gating ARM: Orion: Audio: Add clk/clkdev support ARM: Orion: PCIE: Add support for clk ARM: Orion: XOR: Add support for clk ARM: Orion: CESA: Add support for clk ...
2012-05-25Merge tag 'sound-3.5' of ↵Linus Torvalds14-234/+540
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound update from Takashi Iwai: "This is the second updates for 3.5-rc1. It's mainly for OMAP4 HDMI updates and the device tree updates for OMAP, in addition to a couple of PCM accuray improvement and Realtek ALC269VD codec support." * tag 'sound-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (21 commits) ALSA: hda/realtek - Add new codec support for ALC269VD ALSA: core: group read of pointer, tstamp and jiffies ASoC: OMAP: HDMI: Rename sound card source file ASoC: OMAP: HDMI: Make sound card naming more generic ASoC: OMAP: HDMI: Make build config options more generic ASoC: OMAP: HDMI: Expand capabilities of the HDMI DAI ASoC: OMAP: HDMI: Improve how the display state is verified ASoC: OMAP: HDMI: Expand configuration of hw_params ASoC: OMAP: HDMI: Use the DSS audio interface ASoC: OMAP: HDMI: Create a structure for private data of the CPU DAI ASoC: OMAP: HDMI: Change error values in HDMI CPU DAI ASoC: OMAP: HDMI: Update the platform device names ASoC: omap-abe-twl6040: Introduce driver data for runtime parameters ASoC: omap-abe-twl6040: Move Digital Mic widget into dapm table ASoC: omap-abe-twl6040: Keep only one snd_soc_dai_link structure ASoC: omap-dmic: Add device tree bindings ASoC: omap-mcpdm: Add device tree bindings ASoC: omap-mcbsp: buffer size constraint only applies to playback stream ASoC: omap-mcbsp: Use the common interrupt line if supported by the SoC ASoC: omap-mcbsp: Remove unused FRAME dma_op_mode ...
2012-05-25Merge tag 'hda-switcheroo' of ↵Linus Torvalds3-67/+316
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull VGA-switcheroo audio client support for HD-audio from Takashi Iwai. This depended on the recent drm pull. * tag 'hda-switcheroo' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - unlock on error in azx_interrupt() ALSA: hda - Support VGA-switcheroo ALSA: hda - Export snd_hda_lock_devices() ALSA: hda - Check the dead HDMI audio controller by vga-switcheroo
2012-05-25ALSA: hda/realtek - Add new codec support for ALC269VDKailang Yang1-5/+33
Also fix some settings applied only for ALC269VB. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-05-24Merge tag 'firewire-updates' of ↵Linus Torvalds3-29/+2
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394 Pull IEEE 1394 (FireWire) subsystem updates from Stefan Richter: - Fix mismatch between DMA mapping direction (was wrong) and DMA synchronization direction (was correct) of isochronous reception buffers of userspace drivers if vma-mapped for R/W access. For example, libdc1394 was affected. - more consistent retry stategy in device discovery/ rediscovery, and improved failure diagnostics - various small cleanups, e.g. use SCSI layer's DMA mapping API in firewire-sbp2 * tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: sbp2: document the absence of alignment requirements firewire: sbp2: remove superfluous blk_queue_max_segment_size() call firewire: sbp2: use scsi_dma_(un)map firewire: sbp2: give correct DMA device to scsi framework firewire: core: fw_device_refresh(): clean up error handling firewire: core: log config rom reading errors firewire: core: log error in case of failed bus manager lock firewire: move rcode_string() to core firewire: core: improve reread_config_rom() interface firewire: core: wait for inaccessible devices after bus reset firewire: ohci: omit spinlock IRQ flags where possible firewire: ohci: correct signedness of a local variable firewire: core: fix DMA mapping direction firewire: use module_pci_driver
2012-05-24Merge branch 'v4l_for_linus' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - some V4L2 API updates needed by embedded devices - DVB API extensions for ATSC-MH delivery system, used in US for mobile TV - new tuners for fc0011/0012/0013 and tua9001 - a new dvb driver for af9033/9035 - a new ATSC-MH frontend (lg2160) - new remote controller keymaps - Removal of a few legacy webcam driver that got replaced by gspca on several kernel versions ago - a new driver for Exynos 4/5 webcams(s5pp fimc-lite) - a new webcam sensor driver (smiapp) - a new video input driver for embedded (sta2x1xx) - several improvements, fixes, cleanups, etc inside the drivers. Manually fix up conflicts due to err() -> dev_err() conversion in drivers/staging/media/easycap/easycap_main.c * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (484 commits) [media] saa7134-cards: Remove a PCI entry added by mistake [media] radio-sf16fmi: add support for SF16-FMD [media] rc-loopback: remove duplicate line [media] patch for Asus My Cinema PS3-100 (1043:48cd) [media] au0828: Move the Kconfig knob under V4L_USB_DRIVERS [media] em28xx: simple comment fix [media] [resend] radio-sf16fmr2: add PnP support for SF16-FMD2 [media] smiapp: Use v4l2_ctrl_new_int_menu() instead of v4l2_ctrl_new_custom() [media] smiapp: Add support for 8-bit uncompressed formats [media] smiapp: Allow generic quirk registers [media] smiapp: Use non-binning limits if the binning limit is zero [media] smiapp: Initialise rval in smiapp_read_nvm() [media] smiapp: Round minimum pre_pll up rather than down in ip_clk_freq check [media] smiapp: Use 8-bit reads only before identifying the sensor [media] smiapp: Quirk for sensors that only do 8-bit reads [media] smiapp: Pass struct sensor to register writing commands instead of i2c_client [media] smiapp: Allow using external clock from the clock framework [media] zl10353: change .read_snr() to report SNR as a 0.1 dB [media] media: add support to gspca/pac7302.c for 093a:2627 (Genius FaceCam 300) [media] m88rs2000 - only flip bit 2 on reg 0x70 on 16th try ...
2012-05-24Merge tag 'sound-3.5' of ↵Linus Torvalds251-7963/+21166
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "This is the first big chunk for 3.5 merges of sound stuff. There are a few big changes in different areas. First off, the streaming logic of USB-audio endpoints has been largely rewritten for the better support of "implicit feedback". If anything about USB got broken, this change has to be checked. For HD-audio, the resume procedure was changed; instead of delaying the resume of the hardware until the first use, now waking up immediately at resume. This is for buggy BIOS. For ASoC, dynamic PCM support and the improved support for digital links between off-SoC devices are major framework changes. Some highlights are below: * HD-audio - Avoid accesses of invalid pin-control bits that may stall the codec - V-ref setup cleanups - Fix the races in power-saving code - Fix the races in codec cache hashes and connection lists - Split some common codes for BIOS auto-parser to hda_auto_parser.c - Changed the PM resume code to wake up immediately for buggy BIOS - Creative SoundCore3D support - Add Conexant CX20751/2/3/4 codec support * ASoC - Dynamic PCM support, allowing support for SoCs with internal routing through components with tight sequencing and formatting constraints within their internal paths or where there are multiple components connected with CPU managed DMA controllers inside the SoC. - Greatly improved support for direct digital links between off-SoC devices, providing a much simpler way of connecting things like digital basebands to CODECs. - Much more fine grained and robust locking, cleaning up some of the confusion that crept in with multi-component. - CPU support for nVidia Tegra 30 I2S and audio hub controllers and ST-Ericsson MSP I2S controolers - New CODEC drivers for Cirrus CS42L52, LAPIS Semiconductor ML26124, Texas Instruments LM49453. - Some regmap changes needed by the Tegra I2S driver. - mc13783 audio support. * Misc - Rewrite with module_pci_driver() - Xonar DGX support for snd-oxygen - Improvement of packet handling in snd-firewire driver - New USB-endpoint streaming logic - Enhanced M-audio FTU quirks and relevant cleanups - Increment the support of OSS devices to 256 - snd-aloop accuracy improvement There are a few more pending changes for 3.5, but they will be sent slightly later as partly depending on the changes of DRM." Fix up conflicts in regmap (due to duplicate patches, with some further updates then having already come in from the regmap tree). Also some fairly trivial context conflicts in the imx and mcx soc drivers. * tag 'sound-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (280 commits) ALSA: snd-usb: fix stream info output in /proc ALSA: pcm - Add proper state checks to snd_pcm_drain() ALSA: sh: Fix up namespace collision in sh_dac_audio. ALSA: hda/realtek - Fix unused variable compile warning ASoC: sh: fsi: enable chip specific data transfer mode ASoC: sh: fsi: call fsi_hw_startup/shutdown from fsi_dai_trigger() ASoC: sh: fsi: use same format for IN/OUT ASoC: sh: fsi: add fsi_version() and removed meaningless version check ASoC: sh: fsi: use register field macro name on IN/OUT_DMAC ASoC: tegra: Add machine driver for WM8753 codec ALSA: hda - Fix possible races of accesses to connection list array ASoC: OMAP: HDMI: Introduce codec ARM: mx31_3ds: Add sound support ASoC: imx-mc13783 cleanup mx31moboard: Add sound support ASoC: mc13783 codec cleanups ASoC: add imx-mc13783 sound support ASoC: Add mc13783 codec mfd: mc13xxx: add codec platform data ASoC: don't flip master of DT-instantiated DAI links ...
2012-05-23Merge branch 'for-linus' of ↵Linus Torvalds3-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial updates from Jiri Kosina: "As usual, it's mostly typo fixes, redundant code elimination and some documentation updates." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (57 commits) edac, mips: don't change code that has been removed in edac/mips tree xtensa: Change mail addresses of Hannes Weiner and Oskar Schirmer lib: Change mail address of Oskar Schirmer net: Change mail address of Oskar Schirmer arm/m68k: Change mail address of Sebastian Hess i2c: Change mail address of Oskar Schirmer net: Fix tcp_build_and_update_options comment in struct tcp_sock atomic64_32.h: fix parameter naming mismatch Kconfig: replace "--- help ---" with "---help---" c2port: fix bogus Kconfig "default no" edac: Fix spelling errors. qla1280: Remove redundant NULL check before release_firmware() call remoteproc: remove redundant NULL check before release_firmware() qla2xxx: Remove redundant NULL check before release_firmware() call. aic94xx: Get rid of redundant NULL check before release_firmware() call tehuti: delete redundant NULL check before release_firmware() qlogic: get rid of a redundant test for NULL before call to release_firmware() bna: remove redundant NULL test before release_firmware() tg3: remove redundant NULL test before release_firmware() call typhoon: get rid of redundant conditional before all to release_firmware() ...
2012-05-23ALSA: core: group read of pointer, tstamp and jiffiesPierre-Louis Bossart1-5/+18
Group read of hw_ptr, tstamp and jiffies in a sequence for better correlation. Previous code took timestamp at the end, which could introduce delays between audio time and system time. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-05-23Merge branch 'for-3.5' of ↵Takashi Iwai12-224/+489
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/asoc into topic/asoc
2012-05-22Merge tag 'pinctrl' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-0/+8
Pull arm soc-specific pinctrl changes from Olof Johansson: "With this, five platforms are moving to the relatively new pinctrl subsystem for their pin management, replacing the older soc specific in-kernel interfaces with common code. There is quite a bit of net addition of code for each platform being added to the pinctrl subsystem. But the payback comes later when adding new boards can be done by only providing new device trees instead." Fix up trivial conflicts in arch/arm/mach-ux500/{Makefile,board-mop500.c} * tag 'pinctrl' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (61 commits) mtd: nand: gpmi: fix compile error caused by pinctrl call ARM: PRIMA2: select PINCTRL and PINCTRL_SIRF in Kconfig ARM: nomadik: enable PINCTRL_NOMADIK where needed ARM: mxs: enable pinctrl support video: mxsfb: adopt pinctrl support ASoC: mxs-saif: adopt pinctrl support i2c: mxs: adopt pinctrl support mtd: nand: gpmi: adopt pinctrl support mmc: mxs-mmc: adopt pinctrl support serial: mxs-auart: adopt pinctrl support serial: amba-pl011: adopt pinctrl support spi/imx: adopt pinctrl support i2c: imx: adopt pinctrl support can: flexcan: adopt pinctrl support net: fec: adopt pinctrl support ARM: ux500: switch MSP to using pinctrl for pins ARM: ux500: alter MSP registration to return a device pointer ARM: ux500: switch to using pinctrl for uart0 ARM: ux500: delete custom pin control system ARM: ux500: switch over to Nomadik pinctrl driver ...
2012-05-22ASoC: OMAP: HDMI: Rename sound card source fileRicardo Neri2-2/+2
Rename sound card driver source file to encompass not only OMAP4 but future OMAP versions that feature HDMI. Signed-off-by: Ricardo Neri <ricardo.neri@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-05-22ASoC: OMAP: HDMI: Make sound card naming more genericRicardo Neri1-14/+14
Rename all the relevant structures, variables and functions to not make specific reference to OMAP4. This is to make the driver encompass future OMAP versions that feature HDMI and not only OMAP4. These changes are only in naming. There are not functional changes. Signed-off-by: Ricardo Neri <ricardo.neri@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-05-22ASoC: OMAP: HDMI: Make build config options more genericRicardo Neri2-4/+4
Make Kconfig and Makefile more generic to encompass not only OMAP4 but other OMAP processors featuring HDMI. Also, relax the dependency list to depend only on any OMAP processor supporting OMAP2_DSS and OMAP4_DSS_HDMI. As HDMI support for future OMAP versions is added, the dependency list must change accordingly. Signed-off-by: Ricardo Neri <ricardo.neri@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-05-22ASoC: OMAP: HDMI: Expand capabilities of the HDMI DAIRicardo Neri2-2/+4
According to the HDMI specification, a source is permitted to transmit L-PCM audio in the following sample rates: 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz or 192kHz. It also supports up to 8 audio channels. The sink may not necessarily support all these sample rates and channels. However, as this CPU DAI describes the HDMI source, it makes sense to include them. The limitation of capabilities as supported by the sink should be done in the ASoC HDMI codec. Signed-off-by: Ricardo Neri <ricardo.neri@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-05-22ASoC: OMAP: HDMI: Improve how the display state is verifiedRicardo Neri2-35/+8
Before starting to play audio, we need to make sure that the display is active and the current video mode supports audio. instead of using the overlay manager in the machine driver, we use the DSS audio interface's audio_supported function. As we already have a pointer to the correct dssdev, we do not have to look for it every time audio is to be played. Also, the CPU DAI startup function is called earlier than the card hw_param function. Hence and we can detect the state of the display earlier. While there, add a error message if the constraint cannot be applied. Signed-off-by: Ricardo Neri <ricardo.neri@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> squash to improve err Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-05-22ASoC: OMAP: HDMI: Expand configuration of hw_paramsRicardo Neri1-1/+115
Expand the configuration of the hw_params to include the IEC-60958 channel status word and the CEA-861 audio infoframe. The configuration of such structures depends on the snd_pcm_hw_params received. A omap_dss_audio is used to pass the configuration parameters to DSS. Signed-off-by: Ricardo Neri <ricardo.neri@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-05-22ASoC: OMAP: HDMI: Use the DSS audio interfaceRicardo Neri2-0/+78
Instead of accessing the HDMI IP directly, the CPU DAI driver takes advantage of the audio interface provided by the DSS device driver. The ASoC driver will link the DSS audio functionality with ALSA by calling the appropriate DSS device driver functions at the relevant moments. For this, three new DAI operations are added: trigger, prepare and shutdown operations. At the moment, it is assumed that only one HDMI display is available in the system, as it is the case in OMAP4. However, in the future, one DAI for each HDMI display should be provided. Signed-off-by: Ricardo Neri <ricardo.neri@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-05-22ASoC: OMAP: HDMI: Create a structure for private data of the CPU DAIRicardo Neri1-9/+19
Create a struct hdmi_priv to store the relevant data of the CPU DAI driver. As more data is added to the driver, having all the data in the same location eases its handling. At the moment, only the DMA configuration parameters are included in the structure. Also, the required memory is allocated using devm_kzalloc rather than using a static global variable. Signed-off-by: Ricardo Neri <ricardo.neri@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-05-22ASoC: OMAP: HDMI: Change error values in HDMI CPU DAIRicardo Neri1-2/+2
When getting the needed resources fails, return -ENODEV. This is more in line with other drivers do and it gives a more descriptive error. Signed-off-by: Ricardo Neri <ricardo.neri@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-05-22ASoC: OMAP: HDMI: Update the platform device namesRicardo Neri2-6/+6
In order to utilize the new OMAP HDMI codec and the updated name of the device of the CPU DAI, update the names at the drivers accordingly. While there, also update the name of the machine driver to be more generic and encompass more OMAP processors featuring HDMI and not only OMAP4. Signed-off-by: Ricardo Neri <ricardo.neri@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-05-22ASoC: omap-abe-twl6040: Introduce driver data for runtime parametersPeter Ujfalusi1-4/+21
In preparation to Device Tree support. With DT booted kernel we can not rely on pdata which used to hold information needed for the driver at runtime. Use the card's driver data to hold these informations from now on. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-05-22ASoC: omap-abe-twl6040: Move Digital Mic widget into dapm tablePeter Ujfalusi1-10/+3
The needed change in routing will be done runtime for the non twl6040 connected widgets, like the Digital microphone. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-05-22ASoC: omap-abe-twl6040: Keep only one snd_soc_dai_link structurePeter Ujfalusi1-21/+9
There is no need to have two snd_soc_dai_link structure for the two setup the machine driver supports. We can just tell core to register only the first link if the DMIC link is not in use on the device. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-05-22ASoC: omap-dmic: Add device tree bindingsPeter Ujfalusi1-0/+8
Device tree support for OMAP4+ dmic cpu dai driver. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-05-22ASoC: omap-mcpdm: Add device tree bindingsPeter Ujfalusi1-0/+8
Device tree support for OMAP4+ McPDM cpu dai driver. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-05-22ASoC: omap-mcbsp: buffer size constraint only applies to playback streamPeter Ujfalusi1-6/+8
In capture stream the buffer size does not need to be constrained to be bigger then the McBSP FIFO. In capture the FIFO content is taken out in period length burst, this enusres that the FIFO is not going to overflow. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-05-22ASoC: omap-mcbsp: Use the common interrupt line if supported by the SoCPeter Ujfalusi2-25/+95
With the common irq the driver only needs to use one interrupt line, and it provides better debugging possibilites compared to the legacy TX/RX interrupt lines. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-05-22ASoC: omap-mcbsp: Remove unused FRAME dma_op_modePeter Ujfalusi3-3/+1
The frame dma_op_mode has never been used, and it is just creating confusion for users/developers. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-05-22ASoC: omap-mcbsp: Use DMA packet mode for non mono streams on OMAP3+Peter Ujfalusi1-13/+17
Take the DMA packet mode into use when the McBSP is configured in element dma_op_mode if the stream is not mono. In this way we transfer one sample from/to McBSP FIFO upon DMA request. This change only affects OMAP3+ versions, where the McBSP ports have FIFO. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-05-22Merge tag 'asoc-3.5' of ↵Takashi Iwai8-66/+470
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Last minute updates These are all new code, they've been in -next already so should be OK for merge this time round. I'd been planning to send a pull request today after they'd had a bit of exposure there to make sure breakage didn't propagate into your tree.
2012-05-22Merge tag 'regulator-3.5' of ↵Linus Torvalds1-2/+6
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator updates from Mark Brown: "The major thing here is the addition of some helpers to factor code out of drivers, making a fair proportion of regulators much more just data rather than code which is nice. - Helpers in the core for regulators using regmap, providing generic implementations of the enable and voltage selection operations which just need data to describe them in the drivers. - Split out voltage mapping and voltage setting, allowing many more drivers to take advantage of the infrastructure for selectors. - Loads and loads of cleanups from Axel Lin once again, including many changes to take advantage of the above new framework features - New drivers for Ricoh RC5T583, TI TPS62362, TI TPS62363, TI TPS65913, TI TWL6035 and TI TWL6037. Some of the registration changes to support the core refactoring caused so many conflicts that eventually topic branches were abandoned for this release." * tag 'regulator-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (227 commits) regulator: tps65910: use of_node of matched regulator being register regulator: tps65910: dt: support when "regulators" node found regulator: tps65910: add error message in case of failure regulator: tps62360: dt: initialize of_node param for regulator register. regulator: tps65910: use devm_* for memory allocation regulator: tps65910: use small letter for regulator names mfd: tpx6586x: Depend on regulator regulator: regulator for Palmas Kconfig regulator: regulator driver for Palmas series chips regulator: Enable Device Tree for the db8500-prcmu regulator driver regulator: db8500-prcmu: Separate regulator registration from probe regulator: ab3100: Use regulator_map_voltage_iterate() regulator: tps65217: Convert to set_voltage_sel and map_voltage regulator: Enable the ab8500 for Device Tree regulator: ab8500: Split up probe() into manageable pieces regulator: max8925: Remove check_range function and max_uV from struct rc5t583_regulator_info regulator: max8649: Remove unused check_range() function regulator: rc5t583: Remove max_uV from struct rc5t583_regulator_info regulator: da9052: Convert to set_voltage_sel and map_voltage regulator: max8952: Use devm_kzalloc ...
2012-05-21Merge tag 'v3.4' with SCSI updates, needed for subsequent firewire-sbp2 changesStefan Richter39-235/+517
Linux 3.4
2012-05-21Merge branch 'topic/misc' into for-linusTakashi Iwai75-1646/+2148
2012-05-21Merge branch 'topic/hda' into for-linusTakashi Iwai19-1387/+1612
2012-05-21ALSA: snd-usb: fix stream info output in /procDaniel Mack1-0/+12
Set some substream struct members to make the proc interface code work again. Signed-off-by: Daniel Mack <zonque@gmail.com> Reported-by: Felix Homann <linuxaudio@showlabor.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-05-21Merge branch 'topic/asoc' into for-linusTakashi Iwai156-4908/+16954
2012-05-21ALSA: pcm - Add proper state checks to snd_pcm_drain()Takashi Iwai1-1/+11
The handling for some PCM states is missing for snd_pcm_drain(). At least, XRUN streams should be simply dropped to SETUP, and a few initial invalid states should be rejected. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-05-21ALSA: sh: Fix up namespace collision in sh_dac_audio.Paul Mundt1-2/+2
The module_platform_driver() conversion ended up tripping over the driver name, leading to confusion in the macro with regards to 'driver' being redefined. rename it to something slightly more suitable to avoid namespace collisions. sound/sh/sh_dac_audio.c:444:122: error: conflicting types for 'driver_init' include/linux/device.h:773:6: note: previous declaration of 'driver_init' was here make[3]: *** [sound/sh/sh_dac_audio.o] Error 1 Signed-off-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-05-21ALSA: hda/realtek - Fix unused variable compile warningTakashi Iwai1-1/+0
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-05-19ASoC: sh: fsi: enable chip specific data transfer modeKuninori Morimoto1-34/+143
SupherH FSI2 can use special data transfer, but it depends on CPU-FSI2 connection style. We can use 16bit data stream mode if it was valid connection, and it is required for 16bit data DMA transfer / SPDIF sound output. We can use 24bit data transfer if it was invalid connection. We can select connection type if CPU is SH7372, and it is always valid connection if latest SuperH. This patch adds new bus_option and fsi_bus_setup() for supporting these feature. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-19ASoC: sh: fsi: call fsi_hw_startup/shutdown from fsi_dai_trigger()Kuninori Morimoto1-2/+5
fsi_hw_startup/shutdown() needs the setup of bus width, but it is impossible to get parameter of snd_pcm_runtime at this timing. So, these functions are changed so that be called from fsi_dai_trigger(). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>