summaryrefslogtreecommitdiff
path: root/sound
AgeCommit message (Collapse)AuthorFilesLines
2013-07-17ALSA: seq-oss: Initialize MIDI clients asynchronouslyTakashi Iwai2-4/+14
We've got bug reports that the module loading stuck on Debian system with 3.10 kernel. The debugging session revealed that the initial registration of OSS sequencer clients stuck at module loading time, which involves again with request_module() at the init phase. This is triggered only by special --install stuff Debian is using, but it's still not good to have such loops. As a workaround, call the registration part asynchronously. This is a better approach irrespective of the hang fix, in anyway. Reported-and-tested-by: Philipp Matthias Hahn <pmhahn@pmhahn.de> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-16ALSA: hda - Add new GPU codec ID to snd-hdaAaron Plattner1-0/+2
Vendor ID 0x10de0060 is used by a yet-to-be-named GPU chip. Reviewed-by: Andy Ritger <aritger@nvidia.com> Signed-off-by: Aaron Plattner <aplattner@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-15ASoC: s6000: Fix unlocked snd_pcm_stop() callTakashi Iwai1-0/+2
snd_pcm_stop() must be called in the PCM substream lock context. Cc: <stable@vger.kernel.org> Acked-by: Mark Brown <broonie@linaro.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-15ASoC: atmel: Fix unlocked snd_pcm_stop() callTakashi Iwai1-0/+2
snd_pcm_stop() must be called in the PCM substream lock context. Cc: <stable@vger.kernel.org> Acked-by: Mark Brown <broonie@linaro.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-15ALSA: pxa2xx: Fix unlocked snd_pcm_stop() callTakashi Iwai1-0/+2
snd_pcm_stop() must be called in the PCM substream lock context. Cc: <stable@vger.kernel.org> Acked-by: Mark Brown <broonie@linaro.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-15ALSA: usx2y: Fix unlocked snd_pcm_stop() callTakashi Iwai1-0/+4
snd_pcm_stop() must be called in the PCM substream lock context. Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-15ALSA: ua101: Fix unlocked snd_pcm_stop() callTakashi Iwai1-2/+12
snd_pcm_stop() must be called in the PCM substream lock context. Cc: <stable@vger.kernel.org> Acked-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-15ALSA: 6fire: Fix unlocked snd_pcm_stop() callTakashi Iwai1-2/+10
snd_pcm_stop() must be called in the PCM substream lock context. Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-15ALSA: atiixp: Fix unlocked snd_pcm_stop() callTakashi Iwai2-0/+4
snd_pcm_stop() must be called in the PCM substream lock context. Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-15ALSA: asihpi: Fix unlocked snd_pcm_stop() callTakashi Iwai1-0/+3
snd_pcm_stop() must be called in the PCM substream lock context. Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-15Merge tag 'asoc-v3.11-rc1' of ↵Takashi Iwai9-54/+46
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for v3.11 The biggest change here is the OMAP change, these are larger than I'd have liked but make the driver actually usable - during the merge window OMAP removed support for non-DT OMAP4 boards but in doing so removed the method of accessing DMA channels used by the ASoC drivers rendering them unusuable. Otherwise nothing exciting, the symmetric rates change for WM8978 is a fix for the information we expose to userspace.
2013-07-15Merge remote-tracking branch 'asoc/fix/wm8994' into asoc-linusMark Brown1-4/+0
2013-07-15Merge remote-tracking branch 'asoc/fix/wm8978' into asoc-linusMark Brown1-0/+1
2013-07-15Merge remote-tracking branch 'asoc/fix/sgtl5000' into asoc-linusMark Brown2-2/+2
2013-07-15Merge remote-tracking branch 'asoc/fix/samsung' into asoc-linusMark Brown1-4/+4
2013-07-15Merge remote-tracking branch 'asoc/fix/omap' into asoc-linusMark Brown4-44/+39
2013-07-15sound: oss/vwsnd: Always define vwsnd_mutexTakashi Iwai1-1/+2
While the conversion of BKL to mutex in commit 645ef9ef, the mutex definition was put in a wrong place inside #ifdef WSND_DEBUG, which leads to the build error. Just move it outside the ifdef. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-15sound: oss/vwsnd: Add missing inclusion of linux/delay.hTakashi Iwai1-0/+1
Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-14Merge tag 'fixes-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "This is our first set of fixes from arm-soc for 3.11. - A handful of build and warning fixes from Arnd - A collection of OMAP fixes - defconfig updates to make the default configs more useful for real use (and testing) out of the box on hardware And a couple of other small fixes. Some of these have been recently applied but it's normally how we deal with fixes, with less bake time in -next needed" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (32 commits) arm: multi_v7_defconfig: Tweaks for omap and sunxi arm: multi_v7_defconfig: add i.MX options and NFS root ARM: omap2: add select of TI_PRIV_EDMA ARM: exynos: select PM_GENERIC_DOMAINS only when used ARM: ixp4xx: avoid circular header dependency ARM: OMAP: omap_common_late_init may be unused ARM: sti: move DEBUG_STI_UART into alphabetical order ARM: OMAP: build mach-omap code only if needed ARM: zynq: use DT_MACHINE_START ARM: omap5: omap5 has SCU and TWD ARM: OMAP2+: omap2plus_defconfig: Enable appended DTB support ARM: OMAP2+: Enable TI_EDMA in omap2plus_defconfig ARM: OMAP2+: omap2plus_defconfig: enable DRA752 thermal support by default ARM: OMAP2+: omap2plus_defconfig: enable TI bandgap driver ARM: OMAP2+: devices: remove duplicated include from devices.c ARM: OMAP3: igep0020: Set DSS pins in correct mux mode. ARM: OMAP2+: N900: enable N900-specific drivers even if device tree is enabled ARM: OMAP2+: Cocci spatch "ptr_ret.spatch" ARM: OMAP2+: Remove obsolete Makefile line ARM: OMAP5: Enable Cortex A15 errata 798181 ...
2013-07-12ASoC: wm8978: enable symmetric ratesKuninori Morimoto1-0/+1
wm8978 needs .symmetric_rates = 1. The playback/capture will be strange without this patch when it used asymmetric rate in same time Tested-by: Yusuke Goda <yusuke.goda.sx@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-11Merge tag 'sound-3.11' of ↵Linus Torvalds8-73/+73
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A few small fixes (and cleanups) for HD-audio, USB-audio and ASoC" * tag 'sound-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: usb-audio: fix regression for fixed stream quirk ALSA: hda - Keep halting ALC5505 DSP ASoC: wm8962: fix NULL pdata pointer ASoC: imx-sgtl5000: return E_PROBE_DEFER if ssi/codec not found ASoC: Samsung: Remove redundant comment ALSA: hda - Fix EAPD vmaster hook for AD1884 & co ASoC: samsung: Remove obsolete GPIO based DT pinmuxing ASoC: mxs: register saif mclk to clock framework
2013-07-11ASoC: omap-mcbsp: Use different method for DMA request when booted with DTPeter Ujfalusi1-17/+22
The DMA resource no longer available via this API when booting with DT. When the board is booted with DT do not use platform_get_resource_byname(), instead set the dma_data.filter_data to the name of the DMA channel and omap-pcm can use this name to request the DMA channel. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-11ASoC: omap-dmic: Do not use platform_get_resource_byname() for DMAPeter Ujfalusi1-10/+1
The DMA resource no longer available via this API when booting with DT. DMIC is only available on OMAP4/5 and both can boot with DT only. Set the dma_data.filter_data to the DMA name which will be used by omap-pcm to request the DMA channel. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-11ASoC: omap-mcpdm: Do not use platform_get_resource_byname() for DMAPeter Ujfalusi1-14/+2
The DMA resource no longer available via this API when booting with DT. McPDM is only available on OMAP4/5 and both can boot with DT only. Set the dma_data.filter_data to the DMA name which will be used by omap-pcm to request the DMA channel. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-11ASoC: omap-pcm: Request the DMA channel differently when DT is involvedPeter Ujfalusi1-3/+14
When booting with DT the platform_get_resource_byname() is not available to get the DMA resource. In this case the DAI drivers will set the filter_data to the name of the DMA and omap-pcm can use this to request the DMA channel. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-11ASoC: Samsung: Set RFS and BFS in slave modePadmavathi Venna1-4/+4
As per the User Manual, the RFS and BFS should be set in slave mode for correct operation. Signed-off-by: Padmavathi Venna <padma.v@samsung.com> Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Reviewed-by: Simon Glass <sjg@google.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-10Merge tag 'firewire-updates' of ↵Linus Torvalds3-107/+82
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394 Pull firewire updates from Stefan Richter: "Make struct ieee1394_device_id.driver_data actually avaliable to 1394 protocol drivers. This is especially useful to 1394 audio drivers for model-specific parameters and methods" * tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: remove support of fw_driver.driver.probe and .remove methods firewire: introduce fw_driver.probe and .remove methods
2013-07-10ALSA: usb-audio: fix regression for fixed stream quirkEldad Zack1-0/+4
Commit 8f898e92aea2c24c7f379ee265d178f69ebb9c07 removed the redundant reads of bInterfaceProtocol from the descriptors, but introduced a regression to devices with quirks of type QUIRK_AUDIO_FIXED_ENDPOINT, since fp->protocol is not set in setup process. As a consequence, audio streams would not get initialized, as the following logs show: [ 48.923043] setting usb interface 3:1 [ 48.923056] Creating new capture data endpoint #81 [ 48.923484] 4:3:1: cannot set freq 48000 to ep 0x81 This patch sets fp->protocol in create_fixed_stream_quirk() and resolves the regression. Signed-off-by: Eldad Zack <eldad@fogrefinery.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-10Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds5-17/+192
Pull drm updates from Dave Airlie: "Okay this is the big one, I was stalled on the fbdev pull req as I stupidly let fbdev guys merge a patch I required to fix a warning with some patches I had, they ended up merging the patch from the wrong place, but the warning should be fixed. In future I'll just take the patch myself! Outside drm: There are some snd changes for the HDMI audio interactions on haswell, they've been acked for inclusion via my tree. This relies on the wound/wait tree from Ingo which is already merged. Major changes: AMD finally released the dynamic power management code for all their GPUs from r600->present day, this is great, off by default for now but also a huge amount of code, in fact it is most of this pull request. Since it landed there has been a lot of community testing and Alex has sent a lot of fixes for any bugs found so far. I suspect radeon might now be the biggest kernel driver ever :-P p.s. radeon.dpm=1 to enable dynamic powermanagement for anyone. New drivers: Renesas r-car display unit. Other highlights: - core: GEM CMA prime support, use new w/w mutexs for TTM reservations, cursor hotspot, doc updates - dvo chips: chrontel 7010B support - i915: Haswell (fbc, ips, vecs, watermarks, audio powerwell), Valleyview (enabled by default, rc6), lots of pll reworking, 30bpp support (this time for sure) - nouveau: async buffer object deletion, context/register init updates, kernel vp2 engine support, GF117 support, GK110 accel support (with external nvidia ucode), context cleanups. - exynos: memory leak fixes, Add S3C64XX SoC series support, device tree updates, common clock framework support, - qxl: cursor hotspot support, multi-monitor support, suspend/resume support - mgag200: hw cursor support, g200 mode limiting - shmobile: prime support - tegra: fixes mostly I've been banging on this quite a lot due to the size of it, and it seems to okay on everything I've tested it on." * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (811 commits) drm/radeon/dpm: implement vblank_too_short callback for si drm/radeon/dpm: implement vblank_too_short callback for cayman drm/radeon/dpm: implement vblank_too_short callback for btc drm/radeon/dpm: implement vblank_too_short callback for evergreen drm/radeon/dpm: implement vblank_too_short callback for 7xx drm/radeon/dpm: add checks against vblank time drm/radeon/dpm: add helper to calculate vblank time drm/radeon: remove stray line in old pm code drm/radeon/dpm: fix display_gap programming on rv7xx drm/nvc0/gr: fix gpc firmware regression drm/nouveau: fix minor thinko causing bo moves to not be async on kepler drm/radeon/dpm: implement force performance level for TN drm/radeon/dpm: implement force performance level for ON/LN drm/radeon/dpm: implement force performance level for SI drm/radeon/dpm: implement force performance level for cayman drm/radeon/dpm: implement force performance levels for 7xx/eg/btc drm/radeon/dpm: add infrastructure to force performance levels drm/radeon: fix surface setup on r1xx drm/radeon: add support for 3d perf states on older asics drm/radeon: set default clocks for SI when DPM is disabled ...
2013-07-08ALSA: hda - Keep halting ALC5505 DSPTakashi Iwai1-2/+17
ALC5505 DSP is enabled even though we don't use the features yet at all. This results in the unnecessarily high power consumption, more than 100mV higher. Until we implement the DSP support, better to bypass DSP for saving more power. Reported-by: Mengdong Lin <mengdong.lin@intel.com> [Patch modified by Mengdong to cal alc5505_dsp_init() with extra acl5505_dsp_halt().] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-05ASoC: wm8994: Remove overly noisy debug loggingMark Brown1-4/+0
This was committed in error. Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-05Merge tag 'asoc-v3.11-4' of ↵Takashi Iwai5-68/+43
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for v3.11 A few small fixes, all driver specific. The removal of the GPIO based pinmuxing is a bug fix, since the obsolete nodes had been removed from the DT it stopped the driver loading.
2013-07-05ASoC: sglt5000: Fix SGTL5000_PLL_FRAC_DIV_MASKFabio Estevam1-1/+1
SGTL5000_PLL_FRAC_DIV_MASK is used to mask bits 0-10 (11 bits in total) of register CHIP_PLL_CTRL, so fix the mask to accomodate all this bit range. Reported-by: Oskar Schirmer <oskar@scara.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
2013-07-05ASoC: sglt5000: Fix the default value of CHIP_SSS_CTRLFabio Estevam1-1/+1
According to the sgtl5000 reference manual, the default value of CHIP_SSS_CTRL is 0x10. Reported-by: Oskar Schirmer <oskar@scara.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
2013-07-04Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina: "The usual stuff from trivial tree" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits) treewide: relase -> release Documentation/cgroups/memory.txt: fix stat file documentation sysctl/net.txt: delete reference to obsolete 2.4.x kernel spinlock_api_smp.h: fix preprocessor comments treewide: Fix typo in printk doc: device tree: clarify stuff in usage-model.txt. open firmware: "/aliasas" -> "/aliases" md: bcache: Fixed a typo with the word 'arithmetic' irq/generic-chip: fix a few kernel-doc entries frv: Convert use of typedef ctl_table to struct ctl_table sgi: xpc: Convert use of typedef ctl_table to struct ctl_table doc: clk: Fix incorrect wording Documentation/arm/IXP4xx fix a typo Documentation/networking/ieee802154 fix a typo Documentation/DocBook/media/v4l fix a typo Documentation/video4linux/si476x.txt fix a typo Documentation/virtual/kvm/api.txt fix a typo Documentation/early-userspace/README fix a typo Documentation/video4linux/soc-camera.txt fix a typo lguest: fix CONFIG_PAE -> CONFIG_x86_PAE in comment ...
2013-07-04Merge remote-tracking branch 'asoc/fix/wm8962' into asoc-linusMark Brown1-1/+1
2013-07-04Merge remote-tracking branch 'asoc/fix/samsung' into asoc-linusMark Brown2-65/+5
2013-07-04Merge remote-tracking branch 'asoc/fix/mxs' into asoc-linusMark Brown1-0/+35
2013-07-04Merge remote-tracking branch 'asoc/fix/fsl' into asoc-linusMark Brown123-2848/+8113
2013-07-04ASoC: wm8962: fix NULL pdata pointerShawn Guo1-1/+1
There is an error in merge commit 384b834 on conflict resolution which causes the following NULL pdata pointer bug. wm8962 0-001a: customer id 0 revision D Unable to handle kernel NULL pointer dereference at virtual address 00000004 pgd = 80004000 [00000004] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.0+ #1 task: bf870000 ti: bf874000 task.ti: bf874000 PC is at wm8962_probe+0x134/0x6c8 LR is at regmap_unlock_mutex+0x10/0x14 pc : [<80452100>] lr : [<80304cf4>] psr: a0000113 sp : bf875c98 ip : 00000000 fp : bf875cd4 r10: 00000000 r9 : bfb1830c r8 : 80779bc4 r7 : 00000000 r6 : 00000001 r5 : bfbac010 r4 : bfb33e00 r3 : 80304ce4 r2 : 00000000 r1 : 00000001 r0 : fffffffb Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c53c7d Table: 1000404a DAC: 00000017 Process swapper/0 (pid: 1, stack limit = 0xbf874238) Stack: (0xbf875c98 to 0xbf876000) ... Fix the error by assigning pdata a correct pointer. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-04ASoC: imx-sgtl5000: return E_PROBE_DEFER if ssi/codec not foundArnaud Patard (Rtp)1-2/+2
If the ssi or codec drivers are not loaded (for instance, because spi or i2c bus drivers are not loaded), returning -EINVAL will for people to unload and then reload the module to get sound working. Returning E_PROBE_DEFER will mitigate this. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-04ASoC: Samsung: Remove redundant commentSachin Kamat1-3/+1
There is a typo in the filename (i2c mentioned instead of i2s). However, this is a redundant piece of information. Delete it altogether. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-04ARM: OMAP2+: N900: enable N900-specific drivers even if device tree is enabledPavel Machek1-1/+1
We still need video & sound drivers with device tree enabled. Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-07-04ALSA: hda - Fix EAPD vmaster hook for AD1884 & coTakashi Iwai1-3/+9
ad1884_fixup_hp_eapd() tries to set the NID for controlling the speaker EAPD from the pin configuration. But the current code can't work expectedly since it sets spec->eapd_nid before calling the generic parser where the autocfg pins are set up. This patch changes the function to set spec->eapd_nid after the generic parser call while it sets vmaster hook unconditionally. The spec->eapd_nid check is moved in the hook function itself instead. Cc: <stable@vger.kernel.org> [v3.9+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-04Merge tag 'sound-3.11' of ↵Linus Torvalds291-3987/+11293
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "A relative calm release at this time with a flat diffstat. The only significant change in the ALSA core side is the support for more than 32 card instances, configurable via kconfig. Other than that, in both ASoC and other parts, mostly some improvements and fixes on the driver side. - hda: More quirks for ALC269-variants on Dell & co, VIA codec fixes - hda: Haswell HDMI audio fixes, runtime PM improvements - hda: Intel BayTrail support, ALC5505 DSP support - es1968: MediaForte M56VAP support - usb-audio: Improved support for Yamaha/Roland devices - usb-audio: M2Tech hiFace, Audio Advantage Micro II support - hdspm: wordclock fixes - ASoC: Pending fixes for WM8962 - ASoC: Cleanups and fixes for Blackfin, SGTL5000 and UX500 - ASoC: Generalisation of the Bluetooth and HDMI stub drivers - ASoC: SSM2518 and RT5640 codec drivers. - ASoC: Tegra CPUs with RT5640 machine driver - ASoC: AC'97 refactoring bug fixes - ASoC: ADAU1701 driver fixes - Clean up of *_set_drvdata() in a wide range of drivers" * tag 'sound-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (284 commits) ALSA: vmaster: Fix the regression of missing vmaster hook call ALSA: hda - Add Dell SSID to support Headset Mic recording ASoC: adau1701: remove control_data assignment ASoC: adau1701: more direct regmap usage ASoC: ac97: fixup multi-platform AC'97 module build failure ASoC: pxa2xx: fixup multi-platform AC'97 build failures ASoC: tegra20-ac97: Remove unused variable ASoC: tegra20-ac97: Remove duplicate error message ALSA: usb-audio: Add Audio Advantage Micro II ASoC: tas5086: fix Mid-Z implementation ASoC: tas5086: fix TAS5086_CLOCK_CONTROL register size ALSA: Replace the magic number 44 with const ALSA: hda - Fix the max length of control name in generic parser ALSA: hda - Guess what, it's two more Dell headset mic quirks ALSA: hda - Yet another Dell headset mic quirk ALSA: hda - Add support for ALC5505 DSP power-save mode ASoC: mfld: Remove unused variable ALSA: usb-audio: add quirks for Roland QUAD/OCTO-CAPTURE ALSA: usb-audio: claim autodetected PCM interfaces all at once ALSA: usb-audio: remove superfluous Roland quirks ...
2013-07-04drivers: avoid format string in dev_set_nameKees Cook1-1/+1
Calling dev_set_name with a single paramter causes it to be handled as a format string. Many callers are passing potentially dynamic string content, so use "%s" in those cases to avoid any potential accidents, including wrappers like device_create*() and bdi_register(). Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04sound/soc/codecs/si476x.c: don't use 0bNNNAndrew Morton1-3/+3
spacr64 gcc-3.4.5 (at least) spits this back. Cc: Andrey Smirnov <andrey.smirnov@convergeddevices.net> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03Merge branch 'for-linus' of ↵Linus Torvalds1-25/+15
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull second set of VFS changes from Al Viro: "Assorted f_pos race fixes, making do_splice_direct() safe to call with i_mutex on parent, O_TMPFILE support, Jeff's locks.c series, ->d_hash/->d_compare calling conventions changes from Linus, misc stuff all over the place." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits) Document ->tmpfile() ext4: ->tmpfile() support vfs: export lseek_execute() to modules lseek_execute() doesn't need an inode passed to it block_dev: switch to fixed_size_llseek() cpqphp_sysfs: switch to fixed_size_llseek() tile-srom: switch to fixed_size_llseek() proc_powerpc: switch to fixed_size_llseek() ubi/cdev: switch to fixed_size_llseek() pci/proc: switch to fixed_size_llseek() isapnp: switch to fixed_size_llseek() lpfc: switch to fixed_size_llseek() locks: give the blocked_hash its own spinlock locks: add a new "lm_owner_key" lock operation locks: turn the blocked_list into a hashtable locks: convert fl_link to a hlist_node locks: avoid taking global lock if possible when waking up blocked waiters locks: protect most of the file_lock handling with i_lock locks: encapsulate the fl_link list handling locks: make "added" in __posix_lock_file a bool ...
2013-07-03ALSA: vmaster: Fix the regression of missing vmaster hook callTakashi Iwai1-1/+1
The commit [1ca2f2ec: ALSA: vmaster: Add snd_ctl_sync_vmaster() helper function] changed master_put() function and the check for the required vmaster hook call is wrongly performed now, which results in the missing hook call upon "Master Playback Switch" value changes. This patch corrects the check logic. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-07-03Merge tag 'drivers-for-linus' of ↵Linus Torvalds1-5/+5
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver specific changes from Arnd Bergmann: "These changes are all driver specific and cross over between arm-soc contents and some other subsystem, in these cases cpufreq, crypto, dma, pinctrl, mailbox and usb, and the subsystem owners agreed to have these changes merged through arm-soc. As we proceed to untangle the dependencies between platform code and driver code, the amount of changes in this category is fortunately shrinking, for 3.11 we have 16 branches here and 101 non-merge changesets, the majority of which are for the stedma40 dma engine driver used in the ux500 platform. Cleaning up that code touches multiple subsystems, but gets rid of the dependency in the end. The mailbox code moved out from mach-omap2 to drivers/mailbox is an intermediate step and is still omap specific at the moment. Patches exist to generalize the subsystem and add other drivers with the same API, but those did not make it for 3.11." * tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (101 commits) crypto: ux500: use dmaengine_submit API crypto: ux500: use dmaengine_prep_slave_sg API crypto: ux500: use dmaengine_device_control API crypto: ux500/crypt: add missing __iomem qualifiers crypto: ux500/hash: add missing static qualifiers crypto: ux500/hash: use readl on iomem addresses dmaengine: ste_dma40: Declare memcpy config as static ARM: ux500: Remove mop500_snowball_ethernet_clock_enable() ARM: ux500: Correct the EN_3v3 regulator's on/off GPIO ARM: ux500: Provide a AB8500 GPIO Device Tree node gpio: rcar: fix gpio_rcar_of_table gpio-rcar: Remove #ifdef CONFIG_OF around OF-specific sections gpio-rcar: Reference core gpio documentation in the DT bindings clk: exynos5250: Add enum entries for divider clock of i2s1 and i2s2 ARM: dts: Update Samsung I2S documentation ARM: dts: add clock provider information for i2s controllers in Exynos5250 ARM: dts: add Exynos audio subsystem clock controller node clk: samsung: register audio subsystem clocks using common clock framework ARM: dts: use #include for all device trees for Samsung pinctrl: s3c24xx: use correct header for chained_irq functions ...