summaryrefslogtreecommitdiff
path: root/tools/Makefile
AgeCommit message (Collapse)AuthorFilesLines
2015-11-13tools: Add a "make all" ruleKamal Mostafa1-0/+9
Signed-off-by: Kamal Mostafa <kamal@canonical.com> Acked-by: Pavel Machek <pavel@ucw.cz> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Pali Rohar <pali.rohar@gmail.com> Cc: Roberta Dobrescu <roberta.dobrescu@gmail.com> Link: http://lkml.kernel.org/r/1447280736-2161-2-git-send-email-kamal@canonical.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-12tools: Actually install tmon in the install ruleKamal Mostafa1-1/+1
Signed-off-by: Kamal Mostafa <kamal@canonical.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Pali Rohar <pali.rohar@gmail.com> Cc: Roberta Dobrescu <roberta.dobrescu@gmail.com> Link: http://lkml.kernel.org/r/1447280736-2161-1-git-send-email-kamal@canonical.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-27Merge tag 'staging-4.2-rc1' of ↵Linus Torvalds1-3/+5
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver updates from Greg KH: "Here's the big, really big, staging tree patches for 4.2-rc1. Loads of stuff in here, almost all just coding style fixes / churn, and a few new drivers as well, one of which I just disabled from the build a few minutes ago due to way too many build warnings. Other than the one "disable this driver" patch, all of these have been in linux-next for quite a while with no reported issues" * tag 'staging-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1163 commits) staging: wilc1000: disable driver due to build warnings Staging: rts5208: fix CHANGE_LINK_STATE value Staging: sm750fb: ddk750_swi2c.c: Insert spaces before parenthesis Staging: sm750fb: ddk750_swi2c.c: Place braces on correct lines Staging: sm750fb: ddk750_swi2c.c: Insert spaces around operators Staging: sm750fb: ddk750_swi2c.c: Replace spaces with tabs Staging: sm750fb: ddk750_swi2c.h: Shorten lines to under 80 characters Staging: sm750fb: ddk750_swi2c.h: Replace spaces with tabs Staging: sm750fb: modedb.h: Shorten lines to under 80 characters Staging: sm750fb: modedb.h: Replace spaces with tabs staging: comedi: addi_apci_3120: rename 'this_board' variables staging: comedi: addi_apci_1516: rename 'this_board' variables staging: comedi: ni_atmio: cleanup ni_getboardtype() staging: comedi: vmk80xx: sanity check context used to get the boardinfo staging: comedi: vmk80xx: rename 'boardinfo' variables staging: comedi: dt3000: rename 'this_board' variables staging: comedi: adv_pci_dio: rename 'this_board' variables staging: comedi: cb_pcidas64: rename 'thisboard' variables staging: comedi: cb_pcidas: rename 'thisboard' variables staging: comedi: me4000: rename 'thisboard' variables ...
2015-06-25Merge tag 'docs-for-linus' of git://git.lwn.net/linux-2.6Linus Torvalds1-2/+12
Pull documentation updates from Jonathan Corbet: "The main thing here is Ingo's big subdirectory documenting feature support for each architecture. Beyond that, it's the usual pile of fixes, tweaks, and small additions" * tag 'docs-for-linus' of git://git.lwn.net/linux-2.6: (79 commits) doc:md: fix typo in md.txt. Documentation/mic/mpssd: don't build x86 userspace when cross compiling Documentation/prctl: don't build tsc tests when cross compiling Documentation/vDSO: don't build tests when cross compiling Doc:ABI/testing: Fix typo in sysfs-bus-fcoe Doc: Docbook: Change wikipedia's URL from http to https in scsi.tmpl Doc: Change wikipedia's URL from http to https Documentation/kernel-parameters: add missing pciserial to the earlyprintk Doc:pps: Fix typo in pps.txt kbuild : Fix documentation of INSTALL_HDR_PATH Documentation: filesystems: updated struct file_operations documentation in vfs.txt kbuild: edit explanation of clean-files variable Doc: ja_JP: Fix typo in HOWTO Move freefall program from Documentation/ to tools/ Documentation: ARM: EXYNOS: Describe boot loaders interface Doc:nfc: Fix typo in nfc-hci.txt vfs: Minor documentation fix Doc: networking: txtimestamp: fix printf format warning Documentation, intel_pstate: Improve legacy mode internal governors description Documentation: extend use case for EXPORT_SYMBOL_GPL() ...
2015-06-09Move freefall program from Documentation/ to tools/Pali Rohár1-2/+12
Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2015-04-29tools build: Fix Makefile(s) to properly invoke tools buildJiri Olsa1-1/+11
Several fixes were needed to allow following builds: $ make tools/tmon $ make -C <kernelsrc> tools/perf $ make -C <kernelsrc>/tools perf - some of the tools (perf) use same make variables as in kernel build, unsetting srctree and objtree - using original $(O) for O variable - perf build does not follow the descend function setup invoking it via it's own make rule I tried the rest of the tools/Makefile targets and they seem to work now. Reported-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: Brian Norris <computersforpeace@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: David Howells <dhowells@redhat.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: linux-kbuild@vger.kernel.org Link: http://lkml.kernel.org/r/1429389280-18720-3-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-29tools build: No need to make libapi for perf explicitlyJiri Olsa1-4/+4
The perf build handles its dependencies by itself. Also renaming libapi libapikfs to libapi as it got changed just recently. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: Brian Norris <computersforpeace@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: David Howells <dhowells@redhat.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: linux-kbuild@vger.kernel.org Link: http://lkml.kernel.org/r/1429389280-18720-2-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-09tools: iio: Add iio targets in tools MakefileRoberta Dobrescu1-3/+4
This patch adds targets for building and cleaning iio tools to tools/Makefile. To build iio tools from the toplevel kernel directory one should call: $ make -C tools iio and for cleaning it $ make -C tools iio_clean Signed-off-by: Roberta Dobrescu <roberta.dobrescu@gmail.com> Reviewed-by: Daniel Baluta <daniel.baluta@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-05-08tools/liblockdep: Build liblockdep from tools/MakefileS. Lockwood-Childs1-0/+6
add targets to build liblockdep with make -C tools liblockdep like the way other stuff under tools/ can be built Signed-off-by: S. Lockwood-Childs <sjl@vctlabs.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2014-02-15Adding makefile for tools/hvBjarke Istrup Pedersen1-5/+6
Currently, there is no makefile for the Hyper-V tools. This patch adds the missing makefile, and adds it to the main tools makefile. Signed-off-by: Bjarke Istrup Pedersen <gurligebis@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-25Merge tag 'pm+acpi-3.14-rc1' of ↵Linus Torvalds1-3/+13
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management updates from Rafael Wysocki: "As far as the number of commits goes, the top spot belongs to ACPI this time with cpufreq in the second position and a handful of PM core, PNP and cpuidle updates. They are fixes and cleanups mostly, as usual, with a couple of new features in the mix. The most visible change is probably that we will create struct acpi_device objects (visible in sysfs) for all devices represented in the ACPI tables regardless of their status and there will be a new sysfs attribute under those objects allowing user space to check that status via _STA. Consequently, ACPI device eject or generally hot-removal will not delete those objects, unless the table containing the corresponding namespace nodes is unloaded, which is extremely rare. Also ACPI container hotplug will be handled quite a bit differently and cpufreq will support CPU boost ("turbo") generically and not only in the acpi-cpufreq driver. Specifics: - ACPI core changes to make it create a struct acpi_device object for every device represented in the ACPI tables during all namespace scans regardless of the current status of that device. In accordance with this, ACPI hotplug operations will not delete those objects, unless the underlying ACPI tables go away. - On top of the above, new sysfs attribute for ACPI device objects allowing user space to check device status by triggering the execution of _STA for its ACPI object. From Srinivas Pandruvada. - ACPI core hotplug changes reducing code duplication, integrating the PCI root hotplug with the core and reworking container hotplug. - ACPI core simplifications making it use ACPI_COMPANION() in the code "glueing" ACPI device objects to "physical" devices. - ACPICA update to upstream version 20131218. This adds support for the DBG2 and PCCT tables to ACPICA, fixes some bugs and improves debug facilities. From Bob Moore, Lv Zheng and Betty Dall. - Init code change to carry out the early ACPI initialization earlier. That should allow us to use ACPI during the timekeeping initialization and possibly to simplify the EFI initialization too. From Chun-Yi Lee. - Clenups of the inclusions of ACPI headers in many places all over from Lv Zheng and Rashika Kheria (work in progress). - New helper for ACPI _DSM execution and rework of the code in drivers that uses _DSM to execute it via the new helper. From Jiang Liu. - New Win8 OSI blacklist entries from Takashi Iwai. - Assorted ACPI fixes and cleanups from Al Stone, Emil Goode, Hanjun Guo, Lan Tianyu, Masanari Iida, Oliver Neukum, Prarit Bhargava, Rashika Kheria, Tang Chen, Zhang Rui. - intel_pstate driver updates, including proper Baytrail support, from Dirk Brandewie and intel_pstate documentation from Ramkumar Ramachandra. - Generic CPU boost ("turbo") support for cpufreq from Lukasz Majewski. - powernow-k6 cpufreq driver fixes from Mikulas Patocka. - cpufreq core fixes and cleanups from Viresh Kumar, Jane Li, Mark Brown. - Assorted cpufreq drivers fixes and cleanups from Anson Huang, John Tobias, Paul Bolle, Paul Walmsley, Sachin Kamat, Shawn Guo, Viresh Kumar. - cpuidle cleanups from Bartlomiej Zolnierkiewicz. - Support for hibernation APM events from Bin Shi. - Hibernation fix to avoid bringing up nonboot CPUs with ACPI EC disabled during thaw transitions from Bjørn Mork. - PM core fixes and cleanups from Ben Dooks, Leonardo Potenza, Ulf Hansson. - PNP subsystem fixes and cleanups from Dmitry Torokhov, Levente Kurusa, Rashika Kheria. - New tool for profiling system suspend from Todd E Brandt and a cpupower tool cleanup from One Thousand Gnomes" * tag 'pm+acpi-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (153 commits) thermal: exynos: boost: Automatic enable/disable of BOOST feature (at Exynos4412) cpufreq: exynos4x12: Change L0 driver data to CPUFREQ_BOOST_FREQ Documentation: cpufreq / boost: Update BOOST documentation cpufreq: exynos: Extend Exynos cpufreq driver to support boost cpufreq / boost: Kconfig: Support for software-managed BOOST acpi-cpufreq: Adjust the code to use the common boost attribute cpufreq: Add boost frequency support in core intel_pstate: Add trace point to report internal state. cpufreq: introduce cpufreq_generic_get() routine ARM: SA1100: Create dummy clk_get_rate() to avoid build failures cpufreq: stats: create sysfs entries when cpufreq_stats is a module cpufreq: stats: free table and remove sysfs entry in a single routine cpufreq: stats: remove hotplug notifiers cpufreq: stats: handle cpufreq_unregister_driver() and suspend/resume properly cpufreq: speedstep: remove unused speedstep_get_state platform: introduce OF style 'modalias' support for platform bus PM / tools: new tool for suspend/resume performance optimization ACPI: fix module autoloading for ACPI enumerated devices ACPI: add module autoloading support for ACPI enumerated devices ACPI: fix create_modalias() return value handling ...
2014-01-16ACPICA: acpidump: Enable tools Makefile to include acpi tools.Lv Zheng1-3/+13
This patch enables ACPI tool build in the tools/Makefile, so that the ACPI tools can be built/cleaned/installed along with other tools. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-12-16tools/: Convert to new topic librariesBorislav Petkov1-6/+6
Move debugfs.* to api/fs/. We have a common tools/lib/api/ place where the Makefile lives and then we place the headers in subdirs. For example, all the fs-related stuff goes to tools/lib/api/fs/ from which we get libapikfs.a (acme got almost the naming he wanted :-)) and we link it into the tools which need it - in this case perf and tools/vm/page-types. acme: "Looking at the implementation, I think some tools can even link directly to the .o files, avoiding the .a file altogether. But that is just an optimization/finer granularity tools/lib/ cherrypicking that toolers can make use of." Fixup documentation cleaning target while at it. Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robert Richter <rric@kernel.org> Cc: Stanislav Fomichev <stfomichev@yandex-team.ru> Cc: Stephane Eranian <eranian@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1386605664-24041-2-git-send-email-bp@alien8.de Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-11-07tools/thermal: Introduce tmon, a tool for thermal subsystemJacob Pan1-2/+13
Increasingly, Linux is running on thermally constrained devices. The simple thermal relationship between processor and fan has become past for modern computers. As hardware vendors cope with the thermal constraints on their products, more sensors are added, new cooling capabilities are introduced. The complexity of the thermal relationship can grow exponentially among cooling devices, zones, sensors, and trip points. They can also change dynamically. To expose such relationship to the userspace, Linux generic thermal layer introduced sysfs entry at /sys/class/thermal with a matrix of symbolic links, trip point bindings, and device instances. To traverse such matrix by hand is not a trivial task. Testing is also difficult in that thermal conditions are often exception cases that hard to reach in normal operations. TMON is conceived as a tool to help visualize, tune, and test the complex thermal subsystem. Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2013-05-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-5/+6
Pull networking updates from David Miller: "Highlights (1721 non-merge commits, this has to be a record of some sort): 1) Add 'random' mode to team driver, from Jiri Pirko and Eric Dumazet. 2) Make it so that any driver that supports configuration of multiple MAC addresses can provide the forwarding database add and del calls by providing a default implementation and hooking that up if the driver doesn't have an explicit set of handlers. From Vlad Yasevich. 3) Support GSO segmentation over tunnels and other encapsulating devices such as VXLAN, from Pravin B Shelar. 4) Support L2 GRE tunnels in the flow dissector, from Michael Dalton. 5) Implement Tail Loss Probe (TLP) detection in TCP, from Nandita Dukkipati. 6) In the PHY layer, allow supporting wake-on-lan in situations where the PHY registers have to be written for it to be configured. Use it to support wake-on-lan in mv643xx_eth. From Michael Stapelberg. 7) Significantly improve firewire IPV6 support, from YOSHIFUJI Hideaki. 8) Allow multiple packets to be sent in a single transmission using network coding in batman-adv, from Martin Hundebøll. 9) Add support for T5 cxgb4 chips, from Santosh Rastapur. 10) Generalize the VXLAN forwarding tables so that there is more flexibility in configurating various aspects of the endpoints. From David Stevens. 11) Support RSS and TSO in hardware over GRE tunnels in bxn2x driver, from Dmitry Kravkov. 12) Zero copy support in nfnelink_queue, from Eric Dumazet and Pablo Neira Ayuso. 13) Start adding networking selftests. 14) In situations of overload on the same AF_PACKET fanout socket, or per-cpu packet receive queue, minimize drop by distributing the load to other cpus/fanouts. From Willem de Bruijn and Eric Dumazet. 15) Add support for new payload offset BPF instruction, from Daniel Borkmann. 16) Convert several drivers over to mdoule_platform_driver(), from Sachin Kamat. 17) Provide a minimal BPF JIT image disassembler userspace tool, from Daniel Borkmann. 18) Rewrite F-RTO implementation in TCP to match the final specification of it in RFC4138 and RFC5682. From Yuchung Cheng. 19) Provide netlink socket diag of netlink sockets ("Yo dawg, I hear you like netlink, so I implemented netlink dumping of netlink sockets.") From Andrey Vagin. 20) Remove ugly passing of rtnetlink attributes into rtnl_doit functions, from Thomas Graf. 21) Allow userspace to be able to see if a configuration change occurs in the middle of an address or device list dump, from Nicolas Dichtel. 22) Support RFC3168 ECN protection for ipv6 fragments, from Hannes Frederic Sowa. 23) Increase accuracy of packet length used by packet scheduler, from Jason Wang. 24) Beginning set of changes to make ipv4/ipv6 fragment handling more scalable and less susceptible to overload and locking contention, from Jesper Dangaard Brouer. 25) Get rid of using non-type-safe NLMSG_* macros and use nlmsg_*() instead. From Hong Zhiguo. 26) Optimize route usage in IPVS by avoiding reference counting where possible, from Julian Anastasov. 27) Convert IPVS schedulers to RCU, also from Julian Anastasov. 28) Support cpu fanouts in xt_NFQUEUE netfilter target, from Holger Eitzenberger. 29) Network namespace support for nf_log, ebt_log, xt_LOG, ipt_ULOG, nfnetlink_log, and nfnetlink_queue. From Gao feng. 30) Implement RFC3168 ECN protection, from Hannes Frederic Sowa. 31) Support several new r8169 chips, from Hayes Wang. 32) Support tokenized interface identifiers in ipv6, from Daniel Borkmann. 33) Use usbnet_link_change() helper in USB net driver, from Ming Lei. 34) Add 802.1ad vlan offload support, from Patrick McHardy. 35) Support mmap() based netlink communication, also from Patrick McHardy. 36) Support HW timestamping in mlx4 driver, from Amir Vadai. 37) Rationalize AF_PACKET packet timestamping when transmitting, from Willem de Bruijn and Daniel Borkmann. 38) Bring parity to what's provided by /proc/net/packet socket dumping and the info provided by netlink socket dumping of AF_PACKET sockets. From Nicolas Dichtel. 39) Fix peeking beyond zero sized SKBs in AF_UNIX, from Benjamin Poirier" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1722 commits) filter: fix va_list build error af_unix: fix a fatal race with bit fields bnx2x: Prevent memory leak when cnic is absent bnx2x: correct reading of speed capabilities net: sctp: attribute printl with __printf for gcc fmt checks netlink: kconfig: move mmap i/o into netlink kconfig netpoll: convert mutex into a semaphore netlink: Fix skb ref counting. net_sched: act_ipt forward compat with xtables mlx4_en: fix a build error on 32bit arches Revert "bnx2x: allow nvram test to run when device is down" bridge: avoid OOPS if root port not found drivers: net: cpsw: fix kernel warn on cpsw irq enable sh_eth: use random MAC address if no valid one supplied 3c509.c: call SET_NETDEV_DEV for all device types (ISA/ISAPnP/EISA) tg3: fix to append hardware time stamping flags unix/stream: fix peeking with an offset larger than data in queue unix/dgram: fix peeking with an offset larger than data in queue unix/dgram: peek beyond 0-sized skbs openvswitch: Remove unneeded ovs_netdev_get_ifindex() ...
2013-03-21filter: add minimal BPF JIT image disassemblerDaniel Borkmann1-5/+6
This is a minimal stand-alone user space helper, that allows for debugging or verification of emitted BPF JIT images. This is in particular useful for emitted opcode debugging, since minor bugs in the JIT compiler can be fatal. The disassembler is architecture generic and uses libopcodes and libbfd. How to get to the disassembly, example: 1) `echo 2 > /proc/sys/net/core/bpf_jit_enable` 2) Load a BPF filter (e.g. `tcpdump -p -n -s 0 -i eth1 host 192.168.20.0/24`) 3) Run e.g. `bpf_jit_disasm -o` to disassemble the most recent JIT code output `bpf_jit_disasm -o` will display the related opcodes to a particular instruction as well. Example for x86_64: $ ./bpf_jit_disasm 94 bytes emitted from JIT compiler (pass:3, flen:9) ffffffffa0356000 + <x>: 0: push %rbp 1: mov %rsp,%rbp 4: sub $0x60,%rsp 8: mov %rbx,-0x8(%rbp) c: mov 0x68(%rdi),%r9d 10: sub 0x6c(%rdi),%r9d 14: mov 0xe0(%rdi),%r8 1b: mov $0xc,%esi 20: callq 0xffffffffe0d01b71 25: cmp $0x86dd,%eax 2a: jne 0x000000000000003d 2c: mov $0x14,%esi 31: callq 0xffffffffe0d01b8d 36: cmp $0x6,%eax [...] 5c: leaveq 5d: retq $ ./bpf_jit_disasm -o 94 bytes emitted from JIT compiler (pass:3, flen:9) ffffffffa0356000 + <x>: 0: push %rbp 55 1: mov %rsp,%rbp 48 89 e5 4: sub $0x60,%rsp 48 83 ec 60 8: mov %rbx,-0x8(%rbp) 48 89 5d f8 c: mov 0x68(%rdi),%r9d 44 8b 4f 68 10: sub 0x6c(%rdi),%r9d 44 2b 4f 6c [...] 5c: leaveq c9 5d: retq c3 Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-21Merge tag 'perf-core-for-mingo' of ↵Ingo Molnar1-2/+14
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Conflicts: tools/Makefile Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: . Honor parallel jobs, fix from Borislav Petkov . Introduce tools/lib/lk library, initially just removing duplication among tools/perf and tools/vm. from Borislav Petkov . Fix build on non-glibc systems due to libio.h absence, from Cody P Schafer. . Remove some perf_session and tracing dead code, from David Ahern. . Introduce perf stat --repeat forever, from Frederik Deweerdt. . Add perf test entries for checking --cpu in record and stat, from Jiri Olsa. . Add perf test entries for checking breakpoint overflow signal handler issues, from Jiri Olsa. . Add perf test entry for for checking number of EXIT events, from Namhyung Kim. . Simplify some perf_evlist methods and to allow 'stat' to share code with 'record' and 'trace'. . Remove dead code in related to libtraceevent integration, from Namhyung Kim. . Event group view for 'annotate' in --stdio, --tui and --gtk, from Namhyung Kim. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> [ resolved the trivial merge conflict with upstream ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-03-15perf tools: Introduce tools/lib/lk libraryBorislav Petkov1-2/+14
This introduces the tools/lib/lk library, that will gradually have the routines that now are used in tools/perf/ and other tools and that can be shared. Start by carving out debugfs routines for general use. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1361374353-30385-5-git-send-email-bp@alien8.de [ committer note: Add tools/lib/lk/ to perf's MANIFEST so that its tarballs continue to build ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-02-20Merge branch 'for-3.9' of ↵Linus Torvalds1-9/+10
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup changes from Tejun Heo: "Nothing too drastic. - Removal of synchronize_rcu() from userland visible paths. - Various fixes and cleanups from Li. - cgroup_rightmost_descendant() added which will be used by cpuset changes (it will be a separate pull request)." * 'for-3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: fail if monitored file and event_control are in different cgroup cgroup: fix cgroup_rmdir() vs close(eventfd) race cpuset: fix cpuset_print_task_mems_allowed() vs rename() race cgroup: fix exit() vs rmdir() race cgroup: remove bogus comments in cgroup_diput() cgroup: remove synchronize_rcu() from cgroup_diput() cgroup: remove duplicate RCU free on struct cgroup sched: remove redundant NULL cgroup check in task_group_path() sched: split out css_online/css_offline from tg creation/destruction cgroup: initialize cgrp->dentry before css_alloc() cgroup: remove a NULL check in cgroup_exit() cgroup: fix bogus kernel warnings when cgroup_create() failed cgroup: remove synchronize_rcu() from rebind_subsystems() cgroup: remove synchronize_rcu() from cgroup_attach_{task|proc}() cgroup: use new hashtable implementation cgroups: fix cgroup_event_listener error handling cgroups: move cgroup_event_listener.c to tools/cgroup cgroup: implement cgroup_rightmost_descendant() cgroup: remove unused dummy cgroup_fork_callbacks()
2013-01-30tools: Correct typo in tools MakefileBorislav Petkov1-1/+1
It should be make -C tools/ <tool>_install Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Ingo Molnar <mingo@kernel.org> Link: http://lkml.kernel.org/r/1359456492-22156-1-git-send-email-bp@alien8.de Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-01-07cgroups: move cgroup_event_listener.c to tools/cgroupGreg Thelen1-9/+10
Move the cgroup_event_listener.c tool from Documentation into the new tools/cgroup directory. This change involves wiring cgroup_event_listener.c into the tools/ make system so that is can be built with: $ make tools/cgroup Signed-off-by: Greg Thelen <gthelen@google.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2012-11-20tools: Define a Makefile function to do subdir processingDavid Howells1-12/+12
Define a Makefile function that can be called with $(call ...) to wrap the subdir make invocations in tools/Makefile. This will allow us in the next patch to insert bits in there to honour O= flags when called from the top-level Makefile. Signed-off-by: David Howells <dhowells@redhat.com> Cc: Borislav Petkov <bp@amd64.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1378.1352379110@warthog.procyon.org.uk Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-11tools: Connect to the kernel build systemBorislav Petkov1-0/+10
Now you can do $ make tools/<toolname> from the toplevel kernel directory and have the respective tool built. If you want to build and install it, do $ make tools/<toolname>_install $ make tools/<toolname>_clean should clean the respective tool directories. If you want to clean all in tools, simply do $ make tools/clean Also, if you want to get what the possible targets are, simply calling $ make tools/ should give you the short help. $ make tools/install installs all tools, of course. Doh. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Michal Marek <mmarek@suse.cz> Cc: Sam Ravnborg <sam@ravnborg.org> Link: http://lkml.kernel.org/r/1334162178-17152-6-git-send-email-bp@amd64.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-11tools: Add a help targetBorislav Petkov1-0/+20
... and make it the default one so that calling 'make' without arguments in the tools/ directory gives you the possible targets to build along with a short description of what they are. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Michal Marek <mmarek@suse.cz> Cc: Sam Ravnborg <sam@ravnborg.org> Link: http://lkml.kernel.org/r/1334162178-17152-5-git-send-email-bp@amd64.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-04-11tools: Add a toplevel MakefileBorislav Petkov1-0/+47
Add a Makefile with all the targets under tools/. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Michal Marek <mmarek@suse.cz> Cc: Sam Ravnborg <sam@ravnborg.org> Link: http://lkml.kernel.org/r/1334162178-17152-4-git-send-email-bp@amd64.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>