Age | Commit message (Collapse) | Author | Files | Lines |
|
LLVM automatically places __arena variables into ".arena.1" ELF section.
In order to use such global variables bpf program must include definition
of arena map in ".maps" section, like:
struct {
__uint(type, BPF_MAP_TYPE_ARENA);
__uint(map_flags, BPF_F_MMAPABLE);
__uint(max_entries, 1000); /* number of pages */
__ulong(map_extra, 2ull << 44); /* start of mmap() region */
} arena SEC(".maps");
libbpf recognizes both uses of arena and creates single `struct bpf_map *`
instance in libbpf APIs.
".arena.1" ELF section data is used as initial data image, which is exposed
through skeleton and bpf_map__initial_value() to the user, if they need to tune
it before the load phase. During load phase, this initial image is copied over
into mmap()'ed region corresponding to arena, and discarded.
Few small checks here and there had to be added to make sure this
approach works with bpf_map__initial_value(), mostly due to hard-coded
assumption that map->mmaped is set up with mmap() syscall and should be
munmap()'ed. For arena, .arena.1 can be (much) smaller than maximum
arena size, so this smaller data size has to be tracked separately.
Given it is enforced that there is only one arena for entire bpf_object
instance, we just keep it in a separate field. This can be generalized
if necessary later.
All global variables from ".arena.1" section are accessible from user space
via skel->arena->name_of_var.
For bss/data/rodata the skeleton/libbpf perform the following sequence:
1. addr = mmap(MAP_ANONYMOUS)
2. user space optionally modifies global vars
3. map_fd = bpf_create_map()
4. bpf_update_map_elem(map_fd, addr) // to store values into the kernel
5. mmap(addr, MAP_FIXED, map_fd)
after step 5 user spaces see the values it wrote at step 2 at the same addresses
arena doesn't support update_map_elem. Hence skeleton/libbpf do:
1. addr = malloc(sizeof SEC ".arena.1")
2. user space optionally modifies global vars
3. map_fd = bpf_create_map(MAP_TYPE_ARENA)
4. real_addr = mmap(map->map_extra, MAP_SHARED | MAP_FIXED, map_fd)
5. memcpy(real_addr, addr) // this will fault-in and allocate pages
At the end look and feel of global data vs __arena global data is the same from
bpf prog pov.
Another complication is:
struct {
__uint(type, BPF_MAP_TYPE_ARENA);
} arena SEC(".maps");
int __arena foo;
int bar;
ptr1 = &foo; // relocation against ".arena.1" section
ptr2 = &arena; // relocation against ".maps" section
ptr3 = &bar; // relocation against ".bss" section
Fo the kernel ptr1 and ptr2 has point to the same arena's map_fd
while ptr3 points to a different global array's map_fd.
For the verifier:
ptr1->type == unknown_scalar
ptr2->type == const_ptr_to_map
ptr3->type == ptr_to_map_value
After verification, from JIT pov all 3 ptr-s are normal ld_imm64 insns.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20240308010812.89848-11-alexei.starovoitov@gmail.com
|
|
Teach bpftool to recognize arena map type.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20240308010812.89848-10-alexei.starovoitov@gmail.com
|
|
It's not restricted to working with "internal" maps, it cares about any
map that can be mmap'ed. Reflect that in more succinct and generic name.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20240307031228.42896-6-alexei.starovoitov@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
The example in bpftool-gen.8 explains how to use the pointer of the shadow
type to change the value of a field of a struct_ops map.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20240229064523.2091270-5-thinker.li@gmail.com
|
|
Declares and defines a pointer of the shadow type for each struct_ops map.
The code generator will create an anonymous struct type as the shadow type
for each struct_ops map. The shadow type is translated from the original
struct type of the map. The user of the skeleton use pointers of them to
access the values of struct_ops maps.
However, shadow types only supports certain types of fields, including
scalar types and function pointers. Any fields of unsupported types are
translated into an array of characters to occupy the space of the original
field. Function pointers are translated into pointers of the struct
bpf_program. Additionally, padding fields are generated to occupy the space
between two consecutive fields.
The pointers of shadow types of struct_osp maps are initialized when
*__open_opts() in skeletons are called. For a map called FOO, the user can
access it through the pointer at skel->struct_ops.FOO.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20240229064523.2091270-4-thinker.li@gmail.com
|
|
The .BTF_ids section is pre-filled with zeroed BTF ID entries during the
build and afterwards patched by resolve_btfids with correct values.
Since resolve_btfids always writes in host-native endianness, it relies
on libelf to do the translation when the target ELF is cross-compiled to
a different endianness (this was introduced in commit 61e8aeda9398
("bpf: Fix libelf endian handling in resolv_btfids")).
Unfortunately, the translation will corrupt the flags fields of SET8
entries because these were written during vmlinux compilation and are in
the correct endianness already. This will lead to numerous selftests
failures such as:
$ sudo ./test_verifier 502 502
#502/p sleepable fentry accept FAIL
Failed to load prog 'Invalid argument'!
bpf_fentry_test1 is not sleepable
verification time 34 usec
stack depth 0
processed 0 insns (limit 1000000) max_states_per_insn 0 total_states 0 peak_states 0 mark_read 0
Summary: 0 PASSED, 0 SKIPPED, 1 FAILED
Since it's not possible to instruct libelf to translate just certain
values, let's manually bswap the flags (both global and entry flags) in
resolve_btfids when needed, so that libelf then translates everything
correctly.
Fixes: ef2c6f370a63 ("tools/resolve_btfids: Add support for 8-byte BTF sets")
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/7b6bff690919555574ce0f13d2a5996cacf7bf69.1707223196.git.vmalik@redhat.com
|
|
Instead of using magic offsets to access BTF ID set data, leverage types
from btf_ids.h (btf_id_set and btf_id_set8) which define the actual
layout of the data. Thanks to this change, set sorting should also
continue working if the layout changes.
This requires to sync the definition of 'struct btf_id_set8' from
include/linux/btf_ids.h to tools/include/linux/btf_ids.h. We don't sync
the rest of the file at the moment, b/c that would require to also sync
multiple dependent headers and we don't need any other defs from
btf_ids.h.
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/bpf/ff7f062ddf6a00815fda3087957c4ce667f50532.1707223196.git.vmalik@redhat.com
|
|
musl libc had the basename() prototype in string.h, but this is a
glibc-ism, now they removed the _GNU_SOURCE bits in their devel distro,
Alpine Linux edge:
https://git.musl-libc.org/cgit/musl/commit/?id=725e17ed6dff4d0cd22487bb64470881e86a92e7
So lets use the POSIX version, the whole rationale is spelled out at:
https://gitlab.alpinelinux.org/alpine/aports/-/issues/15643
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <olsajiri@gmail.com>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/lkml/ZZhsPs00TI75RdAr@kernel.org
Link: https://lore.kernel.org/bpf/Zbe3NuOgaupvUcpF@kernel.org
|
|
Displaying cookies for kprobe multi link, in plain mode:
# bpftool link
...
1397: kprobe_multi prog 47532
kretprobe.multi func_cnt 3
addr cookie func [module]
ffffffff82b370c0 3 bpf_fentry_test1
ffffffff82b39780 1 bpf_fentry_test2
ffffffff82b397a0 2 bpf_fentry_test3
And in json mode:
# bpftool link -j | jq
...
{
"id": 1397,
"type": "kprobe_multi",
"prog_id": 47532,
"retprobe": true,
"func_cnt": 3,
"missed": 0,
"funcs": [
{
"addr": 18446744071607382208,
"func": "bpf_fentry_test1",
"module": null,
"cookie": 3
},
{
"addr": 18446744071607392128,
"func": "bpf_fentry_test2",
"module": null,
"cookie": 1
},
{
"addr": 18446744071607392160,
"func": "bpf_fentry_test3",
"module": null,
"cookie": 2
}
]
}
Cookie is attached to specific address, and because we sort addresses
before printing, we need to sort cookies the same way, hence adding
the struct addr_cookie to keep and sort them together.
Also adding missing dd.sym_count check to show_kprobe_multi_json.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240119110505.400573-9-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Displaying cookie for perf event link probes, in plain mode:
# bpftool link
17: perf_event prog 90
kprobe ffffffff82b1c2b0 bpf_fentry_test1 cookie 3735928559
18: perf_event prog 90
kretprobe ffffffff82b1c2b0 bpf_fentry_test1 cookie 3735928559
20: perf_event prog 92
tracepoint sched_switch cookie 3735928559
21: perf_event prog 93
event software:page-faults cookie 3735928559
22: perf_event prog 91
uprobe /proc/self/exe+0xd703c cookie 3735928559
And in json mode:
# bpftool link -j | jq
{
"id": 30,
"type": "perf_event",
"prog_id": 160,
"retprobe": false,
"addr": 18446744071607272112,
"func": "bpf_fentry_test1",
"offset": 0,
"missed": 0,
"cookie": 3735928559
}
{
"id": 33,
"type": "perf_event",
"prog_id": 162,
"tracepoint": "sched_switch",
"cookie": 3735928559
}
{
"id": 34,
"type": "perf_event",
"prog_id": 163,
"event_type": "software",
"event_config": "page-faults",
"cookie": 3735928559
}
{
"id": 35,
"type": "perf_event",
"prog_id": 161,
"retprobe": false,
"file": "/proc/self/exe",
"offset": 880700,
"cookie": 3735928559
}
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240119110505.400573-8-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The error path frees wrong array, it should be ref_ctr_offsets.
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Fixes: a7795698f8b6 ("bpftool: Add support to display uprobe_multi links")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240119110505.400573-4-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
There exists the following warning when building bpftool:
CC prog.o
prog.c: In function ‘profile_open_perf_events’:
prog.c:2301:24: warning: ‘calloc’ sizes specified with ‘sizeof’ in the earlier argument and not in the later argument [-Wcalloc-transposed-args]
2301 | sizeof(int), obj->rodata->num_cpu * obj->rodata->num_metric);
| ^~~
prog.c:2301:24: note: earlier argument should specify number of elements, later size of each element
Tested with the latest upstream GCC which contains a new warning option
-Wcalloc-transposed-args. The first argument to calloc is documented to
be number of elements in array, while the second argument is size of each
element, just switch the first and second arguments of calloc() to silence
the build warning, compile tested only.
Fixes: 47c09d6a9f67 ("bpftool: Introduce "prog profile" command")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20240116061920.31172-1-yangtiezhu@loongson.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
bpfilter was supposed to convert iptables filtering rules into
BPF programs on the fly, from the kernel, through a usermode
helper. The base code for the UMH was introduced in 2018, and
couple of attempts (2, 3) tried to introduce the BPF program
generate features but were abandoned.
bpfilter now sits in a kernel tree unused and unusable, occasionally
causing confusion amongst Linux users (4, 5).
As bpfilter is now developed in a dedicated repository on GitHub (6),
it was suggested a couple of times this year (LSFMM/BPF 2023,
LPC 2023) to remove the deprecated kernel part of the project. This
is the purpose of this patch.
[1]: https://lore.kernel.org/lkml/20180522022230.2492505-1-ast@kernel.org/
[2]: https://lore.kernel.org/bpf/20210829183608.2297877-1-me@ubique.spb.ru/#t
[3]: https://lore.kernel.org/lkml/20221224000402.476079-1-qde@naccy.de/
[4]: https://dxuuu.xyz/bpfilter.html
[5]: https://github.com/linuxkit/linuxkit/pull/3904
[6]: https://github.com/facebook/bpfilter
Signed-off-by: Quentin Deslandes <qde@naccy.de>
Link: https://lore.kernel.org/r/20231226130745.465988-1-qde@naccy.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Adding support to display details for uprobe_multi links,
both plain:
# bpftool link -p
...
24: uprobe_multi prog 126
uprobe.multi path /home/jolsa/bpf/test_progs func_cnt 3 pid 4143
offset ref_ctr_offset cookies
0xd1f88 0xf5d5a8 0xdead
0xd1f8f 0xf5d5aa 0xbeef
0xd1f96 0xf5d5ac 0xcafe
and json:
# bpftool link -p
[{
...
},{
"id": 24,
"type": "uprobe_multi",
"prog_id": 126,
"retprobe": false,
"path": "/home/jolsa/bpf/test_progs",
"func_cnt": 3,
"pid": 4143,
"funcs": [{
"offset": 860040,
"ref_ctr_offset": 16111016,
"cookie": 57005
},{
"offset": 860047,
"ref_ctr_offset": 16111018,
"cookie": 48879
},{
"offset": 860054,
"ref_ctr_offset": 16111020,
"cookie": 51966
}
]
}
]
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/bpf/20231125193130.834322-7-jolsa@kernel.org
|
|
Commit ef01f4e25c17 ("bpf: restore the ebpf program ID for BPF_AUDIT_UNLOAD
and PERF_BPF_EVENT_PROG_UNLOAD") stopped removing program's id from
idr when the offloaded/bound netdev goes away. I was supposed to
take a look and check in [0], but apparently I did not.
Martin points out it might be useful to keep it that way for
observability sake, but we at least need to mark those programs as
unusable.
Mark those programs as 'orphaned' and keep printing the list when
we encounter ENODEV.
0: unspec tag 0000000000000000
xlated 0B not jited memlock 4096B orphaned
[0]: https://lore.kernel.org/all/CAKH8qBtyR20ZWAc11z1-6pGb3Hd47AQUTbE_cfoktG59TqaJ7Q@mail.gmail.com/
v3:
* use two spaces for " orphaned" (Quentin)
Cc: netdev@vger.kernel.org
Fixes: ef01f4e25c17 ("bpf: restore the ebpf program ID for BPF_AUDIT_UNLOAD and PERF_BPF_EVENT_PROG_UNLOAD")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20231127182057.1081138-1-sdf@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
bpftool's man page lists "program" as one of possible values for OBJECT,
while in fact bpftool accepts "prog" instead.
Reported-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Artem Savkov <asavkov@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20231103081126.170034-1-asavkov@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add support to dump BPF programs on netkit via bpftool. This includes both
the BPF link and attach ops programs. Dumped information contain the attach
location, function entry name, program ID and link ID when applicable.
Example with tc BPF link:
# ./bpftool net
xdp:
tc:
nk1(22) netkit/peer tc1 prog_id 43 link_id 12
[...]
Example with json dump:
# ./bpftool net --json | jq
[
{
"xdp": [],
"tc": [
{
"devname": "nk1",
"ifindex": 18,
"kind": "netkit/primary",
"name": "tc1",
"prog_id": 29,
"prog_flags": [],
"link_id": 8,
"link_flags": []
}
],
"flow_dissector": [],
"netfilter": []
}
]
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20231024214904.29825-6-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Add support to dump netkit link information to bpftool in similar way as
we have for XDP. The netkit link info only exposes the ifindex and the
attach_type.
Below shows an example link dump output, and a cgroup link is included for
comparison, too:
# bpftool link
[...]
10: cgroup prog 2466
cgroup_id 1 attach_type cgroup_inet6_post_bind
[...]
8: netkit prog 35
ifindex nk1(18) attach_type netkit_primary
[...]
Equivalent json output:
# bpftool link --json
[...]
{
"id": 10,
"type": "cgroup",
"prog_id": 2466,
"cgroup_id": 1,
"attach_type": "cgroup_inet6_post_bind"
},
[...]
{
"id": 12,
"type": "netkit",
"prog_id": 61,
"devname": "nk1",
"ifindex": 21,
"attach_type": "netkit_primary"
}
[...]
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20231024214904.29825-5-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
When dumping a struct_ops, 2 dictionaries are emitted.
When using `name`, they were already wrapped in an array, but not when
using `id`. Causing `jq` to fail at parsing the payload as it reached
the comma following the first dict.
This change wraps those dictionaries in an array so valid json is emitted.
Before, jq fails to parse the output:
```
$ sudo bpftool struct_ops dump id 1523612 | jq . > /dev/null
parse error: Expected value before ',' at line 19, column 2
```
After, no error parsing the output:
```
sudo ./bpftool struct_ops dump id 1523612 | jq . > /dev/null
```
Signed-off-by: Manu Bretelle <chantr4@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20231018230133.1593152-3-chantr4@gmail.com
|
|
When printing a pointer value, "%p" will either print the hexadecimal
value of the pointer (e.g `0x1234`), or `(nil)` when NULL.
Both of those are invalid json "integer" values and need to be wrapped
in quotes.
Before:
```
$ sudo bpftool struct_ops dump name ned_dummy_cca | grep next
"next": (nil),
$ sudo bpftool struct_ops dump name ned_dummy_cca | \
jq '.[1].bpf_struct_ops_tcp_congestion_ops.data.list.next'
parse error: Invalid numeric literal at line 29, column 34
```
After:
```
$ sudo ./bpftool struct_ops dump name ned_dummy_cca | grep next
"next": "(nil)",
$ sudo ./bpftool struct_ops dump name ned_dummy_cca | \
jq '.[1].bpf_struct_ops_tcp_congestion_ops.data.list.next'
"(nil)"
```
Signed-off-by: Manu Bretelle <chantr4@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20231018230133.1593152-2-chantr4@gmail.com
|
|
Add the necessary plumbing to hook up the new cgroup unix sockaddr
hooks into bpftool.
Signed-off-by: Daan De Meyer <daan.j.demeyer@gmail.com>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20231011185113.140426-7-daan.j.demeyer@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
A C string lacks alignment so use aligned arrays to avoid potential
alignment problems. Switch to using sizeof (less 1 for the \0
terminator) rather than a hardcode size constant.
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20231007044439.25171-2-irogers@google.com
|
|
libbpf accesses the ELF data requiring at least 8 byte alignment,
however, the data is generated into a C string that doesn't guarantee
alignment. Fix this by assigning to an aligned char array. Use sizeof
on the array, less one for the \0 terminator, rather than generating a
constant.
Fixes: a6cc6b34b93e ("bpftool: Provide a helper method for accessing skeleton's embedded ELF data")
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20231007044439.25171-1-irogers@google.com
|
|
Adding 'missed' field to display missed counts for kprobes
attached by perf event link, like:
# bpftool link
5: perf_event prog 82
kprobe ffffffff815203e0 ksys_write
6: perf_event prog 83
kprobe ffffffff811d1e50 scheduler_tick missed 682217
# bpftool link -jp
[{
"id": 5,
"type": "perf_event",
"prog_id": 82,
"retprobe": false,
"addr": 18446744071584220128,
"func": "ksys_write",
"offset": 0,
"missed": 0
},{
"id": 6,
"type": "perf_event",
"prog_id": 83,
"retprobe": false,
"addr": 18446744071580753488,
"func": "scheduler_tick",
"offset": 0,
"missed": 693469
}
]
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20230920213145.1941596-7-jolsa@kernel.org
|
|
Adding 'missed' field to display missed counts for kprobes
attached by kprobe multi link, like:
# bpftool link
5: kprobe_multi prog 76
kprobe.multi func_cnt 1 missed 1
addr func [module]
ffffffffa039c030 fp3_test [fprobe_test]
# bpftool link -jp
[{
"id": 5,
"type": "kprobe_multi",
"prog_id": 76,
"retprobe": false,
"func_cnt": 1,
"missed": 1,
"funcs": [{
"addr": 18446744072102723632,
"func": "fp3_test",
"module": "fprobe_test"
}
]
}
]
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20230920213145.1941596-6-jolsa@kernel.org
|
|
This cast was made by purpose for older libbpf where the
bpf_object_skeleton field is void * instead of const void *
to eliminate a warning (as i understand
-Wincompatible-pointer-types-discards-qualifiers) but this
cast introduces another warning (-Wcast-qual) for libbpf
where data field is const void *
It makes sense for bpftool to be in sync with libbpf from
kernel sources
Signed-off-by: Denys Zagorui <dzagorui@cisco.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20230907090210.968612-1-dzagorui@cisco.com
|
|
Quentin reported build warnings when building bpftool :
link.c: In function ‘perf_config_hw_cache_str’:
link.c:86:18: warning: comparison of unsigned expression in ‘>= 0’ is always true [-Wtype-limits]
86 | if ((id) >= 0 && (id) < ARRAY_SIZE(array)) \
| ^~
link.c:320:20: note: in expansion of macro ‘perf_event_name’
320 | hw_cache = perf_event_name(evsel__hw_cache, config & 0xff);
| ^~~~~~~~~~~~~~~
[... more of the same for the other calls to perf_event_name ...]
He also pointed out the reason and the solution:
We're always passing unsigned, so it should be safe to drop the check on
(id) >= 0.
Fixes: 62b57e3ddd64 ("bpftool: Add perf event names")
Reported-by: Quentin Monnet <quentin@isovalent.com>
Suggested-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Closes: https://lore.kernel.org/bpf/a35d9a2d-54a0-49ec-9ed1-8fcf1369d3cc@isovalent.com
Link: https://lore.kernel.org/bpf/20230830030325.3786-1-laoar.shao@gmail.com
|
|
Add support to dump XDP link information to bpftool. This reuses the
recently added show_link_ifindex_{plain,json}(). The XDP link info only
exposes the ifindex.
Below shows an example link dump output, and a cgroup link is included
for comparison, too:
# bpftool link
[...]
10: cgroup prog 2466
cgroup_id 1 attach_type cgroup_inet6_post_bind
[...]
16: xdp prog 2477
ifindex enp5s0(3)
[...]
Equivalent json output:
# bpftool link --json
[...]
{
"id": 10,
"type": "cgroup",
"prog_id": 2466,
"cgroup_id": 1,
"attach_type": "cgroup_inet6_post_bind"
},
[...]
{
"id": 16,
"type": "xdp",
"prog_id": 2477,
"devname": "enp5s0",
"ifindex": 3
}
[...]
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20230816095651.10014-2-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Add support to dump tcx link information to bpftool. This adds a
common helper show_link_ifindex_{plain,json}() which can be reused
also for other link types. The plain text and json device output is
the same format as in bpftool net dump.
Below shows an example link dump output along with a cgroup link
for comparison:
# bpftool link
[...]
10: cgroup prog 1977
cgroup_id 1 attach_type cgroup_inet6_post_bind
[...]
13: tcx prog 2053
ifindex enp5s0(3) attach_type tcx_ingress
14: tcx prog 2080
ifindex enp5s0(3) attach_type tcx_egress
[...]
Equivalent json output:
# bpftool link --json
[...]
{
"id": 10,
"type": "cgroup",
"prog_id": 1977,
"cgroup_id": 1,
"attach_type": "cgroup_inet6_post_bind"
},
[...]
{
"id": 13,
"type": "tcx",
"prog_id": 2053,
"devname": "enp5s0",
"ifindex": 3,
"attach_type": "tcx_ingress"
},
{
"id": 14,
"type": "tcx",
"prog_id": 2080,
"devname": "enp5s0",
"ifindex": 3,
"attach_type": "tcx_egress"
}
[...]
Suggested-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/r/20230816095651.10014-1-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Currently, bpftool perf subcommand has typo with the help message.
$ tools/bpf/bpftool/bpftool perf help
Usage: bpftool perf { show | list }
bpftool perf help }
Since this bpftool perf subcommand help message has the extra bracket,
this commit fix the typo by removing the extra bracket.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20230811121603.17429-1-danieltimlee@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Add support to dump fd-based attach types via bpftool. This includes both
the tc BPF link and attach ops programs. Dumped information contain the
attach location, function entry name, program ID and link ID when applicable.
Example with tc BPF link:
# ./bpftool net
xdp:
tc:
bond0(4) tcx/ingress cil_from_netdev prog_id 784 link_id 10
bond0(4) tcx/egress cil_to_netdev prog_id 804 link_id 11
flow_dissector:
netfilter:
Example with tc BPF attach ops:
# ./bpftool net
xdp:
tc:
bond0(4) tcx/ingress cil_from_netdev prog_id 654
bond0(4) tcx/egress cil_to_netdev prog_id 672
flow_dissector:
netfilter:
Currently, permanent flags are not yet supported, so 'unknown' ones are dumped
via NET_DUMP_UINT_ONLY() and once we do have permanent ones, we dump them as
human readable string.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20230719140858.13224-7-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
After using "__fallthrough;" in a switch/case block in bpftool's
btf_dumper.c [0], and then turning it into a comment [1] to prevent a
merge conflict in linux-next when the keyword was changed into just
"fallthrough;" [2], we can now drop the comment and use the new keyword,
no underscores.
Also update the other occurrence of "/* fallthrough */" in bpftool.
[0] commit 9fd496848b1c ("bpftool: Support inline annotations when dumping the CFG of a program")
[1] commit 4b7ef71ac977 ("bpftool: Replace "__fallthrough" by a comment to address merge conflict")
[2] commit f7a858bffcdd ("tools: Rename __fallthrough to fallthrough")
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230712152322.81758-1-quentin@isovalent.com
|
|
Enhance bpftool to display comprehensive information about exposed
perf_event links, covering uprobe, kprobe, tracepoint, and generic perf
event. The resulting output will include the following details:
$ tools/bpf/bpftool/bpftool link show
3: perf_event prog 14
event software:cpu-clock
bpf_cookie 0
pids perf_event(19483)
4: perf_event prog 14
event hw-cache:LLC-load-misses
bpf_cookie 0
pids perf_event(19483)
5: perf_event prog 14
event hardware:cpu-cycles
bpf_cookie 0
pids perf_event(19483)
6: perf_event prog 19
tracepoint sched_switch
bpf_cookie 0
pids tracepoint(20947)
7: perf_event prog 26
uprobe /home/dev/waken/bpf/uprobe/a.out+0x1338
bpf_cookie 0
pids uprobe(21973)
8: perf_event prog 27
uretprobe /home/dev/waken/bpf/uprobe/a.out+0x1338
bpf_cookie 0
pids uprobe(21973)
10: perf_event prog 43
kprobe ffffffffb70a9660 kernel_clone
bpf_cookie 0
pids kprobe(35275)
11: perf_event prog 41
kretprobe ffffffffb70a9660 kernel_clone
bpf_cookie 0
pids kprobe(35275)
$ tools/bpf/bpftool/bpftool link show -j
[{"id":3,"type":"perf_event","prog_id":14,"event_type":"software","event_config":"cpu-clock","bpf_cookie":0,"pids":[{"pid":19483,"comm":"perf_event"}]},{"id":4,"type":"perf_event","prog_id":14,"event_type":"hw-cache","event_config":"LLC-load-misses","bpf_cookie":0,"pids":[{"pid":19483,"comm":"perf_event"}]},{"id":5,"type":"perf_event","prog_id":14,"event_type":"hardware","event_config":"cpu-cycles","bpf_cookie":0,"pids":[{"pid":19483,"comm":"perf_event"}]},{"id":6,"type":"perf_event","prog_id":19,"tracepoint":"sched_switch","bpf_cookie":0,"pids":[{"pid":20947,"comm":"tracepoint"}]},{"id":7,"type":"perf_event","prog_id":26,"retprobe":false,"file":"/home/dev/waken/bpf/uprobe/a.out","offset":4920,"bpf_cookie":0,"pids":[{"pid":21973,"comm":"uprobe"}]},{"id":8,"type":"perf_event","prog_id":27,"retprobe":true,"file":"/home/dev/waken/bpf/uprobe/a.out","offset":4920,"bpf_cookie":0,"pids":[{"pid":21973,"comm":"uprobe"}]},{"id":10,"type":"perf_event","prog_id":43,"retprobe":false,"addr":18446744072485508704,"func":"kernel_clone","offset":0,"bpf_cookie":0,"pids":[{"pid":35275,"comm":"kprobe"}]},{"id":11,"type":"perf_event","prog_id":41,"retprobe":true,"addr":18446744072485508704,"func":"kernel_clone","offset":0,"bpf_cookie":0,"pids":[{"pid":35275,"comm":"kprobe"}]}]
For generic perf events, the displayed information in bpftool is limited to
the type and configuration, while other attributes such as sample_period,
sample_freq, etc., are not included.
The kernel function address won't be exposed if it is not permitted by
kptr_restrict. The result as follows when kptr_restrict is 2.
$ tools/bpf/bpftool/bpftool link show
3: perf_event prog 14
event software:cpu-clock
4: perf_event prog 14
event hw-cache:LLC-load-misses
5: perf_event prog 14
event hardware:cpu-cycles
6: perf_event prog 19
tracepoint sched_switch
7: perf_event prog 26
uprobe /home/dev/waken/bpf/uprobe/a.out+0x1338
8: perf_event prog 27
uretprobe /home/dev/waken/bpf/uprobe/a.out+0x1338
10: perf_event prog 43
kprobe kernel_clone
11: perf_event prog 41
kretprobe kernel_clone
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230709025630.3735-11-laoar.shao@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add new functions and macros to get perf event names. These names except
the perf_type_name are all copied from
tool/perf/util/{parse-events,evsel}.c, so that in the future we will
have a good chance to use the same code.
Suggested-by: Jiri Olsa <olsajiri@gmail.com>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230709025630.3735-10-laoar.shao@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Show the already expose kprobe_multi link info in bpftool. The result as
follows,
$ tools/bpf/bpftool/bpftool link show
91: kprobe_multi prog 244
kprobe.multi func_cnt 7
addr func [module]
ffffffff98c44f20 schedule_timeout_interruptible
ffffffff98c44f60 schedule_timeout_killable
ffffffff98c44fa0 schedule_timeout_uninterruptible
ffffffff98c44fe0 schedule_timeout_idle
ffffffffc075b8d0 xfs_trans_get_efd [xfs]
ffffffffc0768a10 xfs_trans_get_buf_map [xfs]
ffffffffc076c320 xfs_trans_get_dqtrx [xfs]
pids kprobe_multi(188367)
92: kprobe_multi prog 244
kretprobe.multi func_cnt 7
addr func [module]
ffffffff98c44f20 schedule_timeout_interruptible
ffffffff98c44f60 schedule_timeout_killable
ffffffff98c44fa0 schedule_timeout_uninterruptible
ffffffff98c44fe0 schedule_timeout_idle
ffffffffc075b8d0 xfs_trans_get_efd [xfs]
ffffffffc0768a10 xfs_trans_get_buf_map [xfs]
ffffffffc076c320 xfs_trans_get_dqtrx [xfs]
pids kprobe_multi(188367)
$ tools/bpf/bpftool/bpftool link show -j
[{"id":91,"type":"kprobe_multi","prog_id":244,"retprobe":false,"func_cnt":7,"funcs":[{"addr":18446744071977586464,"func":"schedule_timeout_interruptible","module":null},{"addr":18446744071977586528,"func":"schedule_timeout_killable","module":null},{"addr":18446744071977586592,"func":"schedule_timeout_uninterruptible","module":null},{"addr":18446744071977586656,"func":"schedule_timeout_idle","module":null},{"addr":18446744072643524816,"func":"xfs_trans_get_efd","module":"xfs"},{"addr":18446744072643578384,"func":"xfs_trans_get_buf_map","module":"xfs"},{"addr":18446744072643592992,"func":"xfs_trans_get_dqtrx","module":"xfs"}],"pids":[{"pid":188367,"comm":"kprobe_multi"}]},{"id":92,"type":"kprobe_multi","prog_id":244,"retprobe":true,"func_cnt":7,"funcs":[{"addr":18446744071977586464,"func":"schedule_timeout_interruptible","module":null},{"addr":18446744071977586528,"func":"schedule_timeout_killable","module":null},{"addr":18446744071977586592,"func":"schedule_timeout_uninterruptible","module":null},{"addr":18446744071977586656,"func":"schedule_timeout_idle","module":null},{"addr":18446744072643524816,"func":"xfs_trans_get_efd","module":"xfs"},{"addr":18446744072643578384,"func":"xfs_trans_get_buf_map","module":"xfs"},{"addr":18446744072643592992,"func":"xfs_trans_get_dqtrx","module":"xfs"}],"pids":[{"pid":188367,"comm":"kprobe_multi"}]}]
When kptr_restrict is 2, the result is,
$ tools/bpf/bpftool/bpftool link show
91: kprobe_multi prog 244
kprobe.multi func_cnt 7
92: kprobe_multi prog 244
kretprobe.multi func_cnt 7
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230709025630.3735-4-laoar.shao@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
If the kernel symbol is in a module, we will dump the module name as
well. The square brackets around the module name are trimmed.
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230709025630.3735-3-laoar.shao@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Fix the following error when building bpftool:
CLANG profiler.bpf.o
CLANG pid_iter.bpf.o
skeleton/profiler.bpf.c:18:21: error: invalid application of 'sizeof' to an incomplete type 'struct bpf_perf_event_value'
__uint(value_size, sizeof(struct bpf_perf_event_value));
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
tools/bpf/bpftool/bootstrap/libbpf/include/bpf/bpf_helpers.h:13:39: note: expanded from macro '__uint'
tools/bpf/bpftool/bootstrap/libbpf/include/bpf/bpf_helper_defs.h:7:8: note: forward declaration of 'struct bpf_perf_event_value'
struct bpf_perf_event_value;
^
struct bpf_perf_event_value is being used in the kernel only when
CONFIG_BPF_EVENTS is enabled, so it misses a BTF entry then.
Define struct bpf_perf_event_value___local with the
`preserve_access_index` attribute inside the pid_iter BPF prog to
allow compiling on any configs. It is a full mirror of a UAPI
structure, so is compatible both with and w/o CO-RE.
bpf_perf_event_read_value() requires a pointer of the original type,
so a cast is needed.
Fixes: 47c09d6a9f67 ("bpftool: Introduce "prog profile" command")
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230707095425.168126-5-quentin@isovalent.com
|
|
In order to allow the BPF program in bpftool's pid_iter.bpf.c to compile
correctly on hosts where vmlinux.h does not define
BPF_LINK_TYPE_PERF_EVENT (running kernel versions lower than 5.15, for
example), define and use a local copy of the enum value. This requires
LLVM 12 or newer to build the BPF program.
Fixes: cbdaf71f7e65 ("bpftool: Add bpf_cookie to link output")
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230707095425.168126-4-quentin@isovalent.com
|
|
When building bpftool with !CONFIG_PERF_EVENTS:
skeleton/pid_iter.bpf.c:47:14: error: incomplete definition of type 'struct bpf_perf_link'
perf_link = container_of(link, struct bpf_perf_link, link);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
tools/bpf/bpftool/bootstrap/libbpf/include/bpf/bpf_helpers.h:74:22: note: expanded from macro 'container_of'
((type *)(__mptr - offsetof(type, member))); \
^~~~~~~~~~~~~~~~~~~~~~
tools/bpf/bpftool/bootstrap/libbpf/include/bpf/bpf_helpers.h:68:60: note: expanded from macro 'offsetof'
#define offsetof(TYPE, MEMBER) ((unsigned long)&((TYPE *)0)->MEMBER)
~~~~~~~~~~~^
skeleton/pid_iter.bpf.c:44:9: note: forward declaration of 'struct bpf_perf_link'
struct bpf_perf_link *perf_link;
^
&bpf_perf_link is being defined and used only under the ifdef.
Define struct bpf_perf_link___local with the `preserve_access_index`
attribute inside the pid_iter BPF prog to allow compiling on any
configs. CO-RE will substitute it with the real struct bpf_perf_link
accesses later on.
container_of() uses offsetof(), which does the necessary CO-RE
relocation if the field is specified with `preserve_access_index` - as
is the case for struct bpf_perf_link___local.
Fixes: cbdaf71f7e65 ("bpftool: Add bpf_cookie to link output")
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230707095425.168126-3-quentin@isovalent.com
|
|
When CONFIG_PERF_EVENTS is not set, struct perf_event remains empty.
However, the structure is being used by bpftool indirectly via BTF.
This leads to:
skeleton/pid_iter.bpf.c:49:30: error: no member named 'bpf_cookie' in 'struct perf_event'
return BPF_CORE_READ(event, bpf_cookie);
~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~
...
skeleton/pid_iter.bpf.c:49:9: error: returning 'void' from a function with incompatible result type '__u64' (aka 'unsigned long long')
return BPF_CORE_READ(event, bpf_cookie);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Tools and samples can't use any CONFIG_ definitions, so the fields
used there should always be present.
Define struct perf_event___local with the `preserve_access_index`
attribute inside the pid_iter BPF prog to allow compiling on any
configs. CO-RE will substitute it with the real struct perf_event
accesses later on.
Fixes: cbdaf71f7e65 ("bpftool: Add bpf_cookie to link output")
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230707095425.168126-2-quentin@isovalent.com
|
|
The -target option has been deprecated since clang 3.4 in 2013. Therefore, use
the preferred --target=bpf form instead. This also matches how we use --target=
in scripts/Makefile.clang.
Signed-off-by: Fangrui Song <maskray@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://github.com/llvm/llvm-project/commit/274b6f0c87a6a1798de0a68135afc7f95def6277
Link: https://lore.kernel.org/bpf/20230624001856.1903733-1-maskray@google.com
|
|
Building BPF selftests with custom HOSTCFLAGS yields an error:
# make HOSTCFLAGS="-O2"
[...]
HOSTCC ./tools/testing/selftests/bpf/tools/build/resolve_btfids/main.o
main.c:73:10: fatal error: linux/rbtree.h: No such file or directory
73 | #include <linux/rbtree.h>
| ^~~~~~~~~~~~~~~~
The reason is that tools/bpf/resolve_btfids/Makefile passes header
include paths by extending HOSTCFLAGS which is overridden by setting
HOSTCFLAGS in the make command (because of Makefile rules [1]).
This patch fixes the above problem by passing the include paths via
`HOSTCFLAGS_resolve_btfids` which is used by tools/build/Build.include
and can be combined with overridding HOSTCFLAGS.
[1] https://www.gnu.org/software/make/manual/html_node/Overriding.html
Fixes: 56a2df7615fa ("tools/resolve_btfids: Compile resolve_btfids as host program")
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20230530123352.1308488-1-vmalik@redhat.com
|
|
Add ability to specify a network interface used to resolve XDP hints
kfuncs when loading program through bpftool.
Usage:
bpftool prog load [...] xdpmeta_dev <ifname>
Writing just 'dev <ifname>' instead of 'xdpmeta_dev' is a very probable
mistake that results in not very descriptive errors,
so 'bpftool prog load [...] dev <ifname>' syntax becomes deprecated,
followed by 'bpftool map create [...] dev <ifname>' for consistency.
Now, to offload program, execute:
bpftool prog load [...] offload_dev <ifname>
To offload map:
bpftool map create [...] offload_dev <ifname>
'dev <ifname>' still performs offloading in the commands above, but now
triggers a warning and is excluded from bash completion.
'xdpmeta_dev' and 'offload_dev' are mutually exclusive options, because
'xdpmeta_dev' basically makes a program device-bound without loading it
onto the said device. For now, offloaded programs cannot use XDP hints [0],
but if this changes, using 'offload_dev <ifname>' should cover this case.
[0] https://lore.kernel.org/bpf/a5a636cc-5b03-686f-4be0-000383b05cfc@linux.dev
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20230517160103.1088185-1-larysa.zaremba@intel.com
|
|
The target_btf_id can help us understand which kernel function is
linked by a tracing prog. The target_btf_id and target_obj_id have
already been exposed to userspace, so we just need to show them.
The result as follows,
$ tools/bpf/bpftool/bpftool link show
2: tracing prog 13
prog_type tracing attach_type trace_fentry
target_obj_id 1 target_btf_id 13964
pids trace(10673)
$ tools/bpf/bpftool/bpftool link show -j
[{"id":2,"type":"tracing","prog_id":13,"prog_type":"tracing","attach_type":"trace_fentry","target_obj_id":1,"target_btf_id":13964,"pids":[{"pid":10673,"comm":"trace"}]}]
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230517103126.68372-3-laoar.shao@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Currently, when using prog loadall and the pin path is a bpffs mountpoint,
bpffs will be repeatedly mounted to the parent directory of the bpffs
mountpoint path. For example, a `bpftool prog loadall test.o /sys/fs/bpf`
will trigger this.
Signed-off-by: Pengcheng Yang <yangpc@wangsu.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/1683342439-3677-1-git-send-email-yangpc@wangsu.com
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-05-16
We've added 57 non-merge commits during the last 19 day(s) which contain
a total of 63 files changed, 3293 insertions(+), 690 deletions(-).
The main changes are:
1) Add precision propagation to verifier for subprogs and callbacks,
from Andrii Nakryiko.
2) Improve BPF's {g,s}setsockopt() handling with wrong option lengths,
from Stanislav Fomichev.
3) Utilize pahole v1.25 for the kernel's BTF generation to filter out
inconsistent function prototypes, from Alan Maguire.
4) Various dyn-pointer verifier improvements to relax restrictions,
from Daniel Rosenberg.
5) Add a new bpf_task_under_cgroup() kfunc for designated task,
from Feng Zhou.
6) Unblock tests for arm64 BPF CI after ftrace supporting direct call,
from Florent Revest.
7) Add XDP hint kfunc metadata for RX hash/timestamp for igc,
from Jesper Dangaard Brouer.
8) Add several new dyn-pointer kfuncs to ease their usability,
from Joanne Koong.
9) Add in-depth LRU internals description and dot function graph,
from Joe Stringer.
10) Fix KCSAN report on bpf_lru_list when accessing node->ref,
from Martin KaFai Lau.
11) Only dump unprivileged_bpf_disabled log warning upon write,
from Kui-Feng Lee.
12) Extend test_progs to directly passing allow/denylist file,
from Stephen Veiss.
13) Fix BPF trampoline memleak upon failure attaching to fentry,
from Yafang Shao.
14) Fix emitting struct bpf_tcp_sock type in vmlinux BTF,
from Yonghong Song.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (57 commits)
bpf: Fix memleak due to fentry attach failure
bpf: Remove bpf trampoline selector
bpf, arm64: Support struct arguments in the BPF trampoline
bpftool: JIT limited misreported as negative value on aarch64
bpf: fix calculation of subseq_idx during precision backtracking
bpf: Remove anonymous union in bpf_kfunc_call_arg_meta
bpf: Document EFAULT changes for sockopt
selftests/bpf: Correctly handle optlen > 4096
selftests/bpf: Update EFAULT {g,s}etsockopt selftests
bpf: Don't EFAULT for {g,s}setsockopt with wrong optlen
libbpf: fix offsetof() and container_of() to work with CO-RE
bpf: Address KCSAN report on bpf_lru_list
bpf: Add --skip_encoding_btf_inconsistent_proto, --btf_gen_optimized to pahole flags for v1.25
selftests/bpf: Accept mem from dynptr in helper funcs
bpf: verifier: Accept dynptr mem as mem in helpers
selftests/bpf: Check overflow in optional buffer
selftests/bpf: Test allowing NULL buffer in dynptr slice
bpf: Allow NULL buffers in bpf_dynptr_slice(_rw)
selftests/bpf: Add testcase for bpf_task_under_cgroup
bpf: Add bpf_task_under_cgroup() kfunc
...
====================
Link: https://lore.kernel.org/r/20230515225603.27027-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
On aarch64, "bpftool feature" reports an incorrect BPF JIT limit:
$ sudo /sbin/bpftool feature
Scanning system configuration...
bpf() syscall restricted to privileged users
JIT compiler is enabled
JIT compiler hardening is disabled
JIT compiler kallsyms exports are enabled for root
skipping kernel config, can't open file: No such file or directory
Global memory limit for JIT compiler for unprivileged users is -201326592 bytes
This is because /proc/sys/net/core/bpf_jit_limit reports
$ sudo cat /proc/sys/net/core/bpf_jit_limit
68169519595520
...and an int is assumed in read_procfs(). Change read_procfs()
to return a long to avoid negative value reporting.
Fixes: 7a4522bbef0c ("tools: bpftool: add probes for /proc/ eBPF parameters")
Reported-by: Nicky Veitch <nicky.veitch@oracle.com>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20230512113134.58996-1-alan.maguire@oracle.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"Mainly singleton patches all over the place.
Series of note are:
- updates to scripts/gdb from Glenn Washburn
- kexec cleanups from Bjorn Helgaas"
* tag 'mm-nonmm-stable-2023-04-27-16-01' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (50 commits)
mailmap: add entries for Paul Mackerras
libgcc: add forward declarations for generic library routines
mailmap: add entry for Oleksandr
ocfs2: reduce ioctl stack usage
fs/proc: add Kthread flag to /proc/$pid/status
ia64: fix an addr to taddr in huge_pte_offset()
checkpatch: introduce proper bindings license check
epoll: rename global epmutex
scripts/gdb: add GDB convenience functions $lx_dentry_name() and $lx_i_dentry()
scripts/gdb: create linux/vfs.py for VFS related GDB helpers
uapi/linux/const.h: prefer ISO-friendly __typeof__
delayacct: track delays from IRQ/SOFTIRQ
scripts/gdb: timerlist: convert int chunks to str
scripts/gdb: print interrupts
scripts/gdb: raise error with reduced debugging information
scripts/gdb: add a Radix Tree Parser
lib/rbtree: use '+' instead of '|' for setting color.
proc/stat: remove arch_idle_time()
checkpatch: check for misuse of the link tags
checkpatch: allow Closes tags with links
...
|
|
When using `bpftool map dump` with map_of_maps, it is usually
more convenient to show the inner map id instead of raw value.
We are changing the plain print behavior to show inner_map_id
instead of hex value, this would help with quick look up of
inner map with `bpftool map dump id <inner_map_id>`.
To avoid disrupting scripted behavior, we will add a new
`inner_map_id` field to json output instead of replacing value.
plain print:
```
$ bpftool map dump id 138
Without Patch:
key:
fc 00 00 00 00 00 00 00 00 00 00 00 00 00 00 05
27 16 06 00
value:
8b 00 00 00
Found 1 element
With Patch:
key:
fc 00 00 00 00 00 00 00 00 00 00 00 00 00 00 05
27 16 06 00
inner_map_id:
139
Found 1 element
```
json print:
```
$ bpftool -p map dump id 567
Without Patch:
[{
"key": ["0xc0","0x00","0x02","0x05","0x27","0x16","0x06","0x00"
],
"value": ["0x38","0x02","0x00","0x00"
]
}
]
With Patch:
[{
"key": ["0xc0","0x00","0x02","0x05","0x27","0x16","0x06","0x00"
],
"value": ["0x38","0x02","0x00","0x00"
],
"inner_map_id": 568
}
]
```
Signed-off-by: Xueming Feng <kuro@kuroa.me>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20230427120313.43574-1-kuro@kuroa.me
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
A new link type, BPF_LINK_TYPE_STRUCT_OPS, was added to attach
struct_ops to links. (226bc6ae6405) It would be helpful for users to
know which map is associated with the link.
The assumption was that every link is associated with a BPF program, but
this does not hold true for struct_ops. It would be better to display
map_id instead of prog_id for struct_ops links. However, some tools may
rely on the old assumption and need a prog_id. The discussion on the
mailing list suggests that tools should parse JSON format. We will maintain
the existing JSON format by adding a map_id without removing prog_id. As
for plain text format, we will remove prog_id from the header line and add
a map_id for struct_ops links.
Signed-off-by: Kui-Feng Lee <kuifeng@meta.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20230421214131.352662-1-kuifeng@meta.com
|