| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[Differences from V1:
- Do not introduce a global typedef, as this is a public header.
- Keep the void* casts in BPF_KPROBE_READ_RET_IP and
BPF_KRETPROBE_READ_RET_IP, as these are necessary
for converting to a const void* argument of
bpf_probe_read_kernel.]
The BPF_PROG, BPF_KPROBE and BPF_KSYSCALL macros defined in
tools/lib/bpf/bpf_tracing.h use a clever hack in order to provide a
convenient way to define entry points for BPF programs as if they were
normal C functions that get typed actual arguments, instead of as
elements in a single "context" array argument.
For example, PPF_PROGS allows writing:
SEC("struct_ops/cwnd_event")
void BPF_PROG(cwnd_event, struct sock *sk, enum tcp_ca_event event)
{
bbr_cwnd_event(sk, event);
dctcp_cwnd_event(sk, event);
cubictcp_cwnd_event(sk, event);
}
That expands into a pair of functions:
void ____cwnd_event (unsigned long long *ctx, struct sock *sk, enum tcp_ca_event event)
{
bbr_cwnd_event(sk, event);
dctcp_cwnd_event(sk, event);
cubictcp_cwnd_event(sk, event);
}
void cwnd_event (unsigned long long *ctx)
{
_Pragma("GCC diagnostic push")
_Pragma("GCC diagnostic ignored \"-Wint-conversion\"")
return ____cwnd_event(ctx, (void*)ctx[0], (void*)ctx[1]);
_Pragma("GCC diagnostic pop")
}
Note how the 64-bit unsigned integers in the incoming CTX get casted
to a void pointer, and then implicitly converted to whatever type of
the actual argument in the wrapped function. In this case:
Arg1: unsigned long long -> void * -> struct sock *
Arg2: unsigned long long -> void * -> enum tcp_ca_event
The behavior of GCC and clang when facing such conversions differ:
pointer -> pointer
Allowed by the C standard.
GCC: no warning nor error.
clang: no warning nor error.
pointer -> integer type
[C standard says the result of this conversion is implementation
defined, and it may lead to unaligned pointer etc.]
GCC: error: integer from pointer without a cast [-Wint-conversion]
clang: error: incompatible pointer to integer conversion [-Wint-conversion]
pointer -> enumerated type
GCC: error: incompatible types in assigment (*)
clang: error: incompatible pointer to integer conversion [-Wint-conversion]
These macros work because converting pointers to pointers is allowed,
and converting pointers to integers also works provided a suitable
integer type even if it is implementation defined, much like casting a
pointer to uintptr_t is guaranteed to work by the C standard. The
conversion errors emitted by both compilers by default are silenced by
the pragmas.
However, the GCC error marked with (*) above when assigning a pointer
to an enumerated value is not associated with the -Wint-conversion
warning, and it is not possible to turn it off.
This is preventing building the BPF kernel selftests with GCC.
This patch fixes this by avoiding intermediate casts to void*,
replaced with casts to `unsigned long long', which is an integer type
capable of safely store a BPF pointer, much like the standard
uintptr_t.
Testing performed in bpf-next master:
- vmtest.sh -- ./test_verifier
- vmtest.sh -- ./test_progs
- make M=samples/bpf
No regressions.
Signed-off-by: Jose E. Marchesi <jose.marchesi@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240502170925.3194-1-jose.marchesi@oracle.com
|
|
In our monrepo, we try to minimize special processing when importing
(aka vendor) third-party source code. Ideally, we try to import
directly from the repositories with the code without changing it, we
try to stick to the source code dependency instead of the artifact
dependency. In the current situation, a patch has to be made for
libbpf to fix the includes in bpf headers so that they work directly
from libbpf/src.
Signed-off-by: Sergey Kacheev <s.kacheev@gmail.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/CAJVhQqUg6OKq6CpVJP5ng04Dg+z=igevPpmuxTqhsR3dKvd9+Q@mail.gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Loading programs that use bpf_usdt_arg() on s390x fails with:
; if (arg_num >= BPF_USDT_MAX_ARG_CNT || arg_num >= spec->arg_cnt)
128: (79) r1 = *(u64 *)(r10 -24) ; frame1: R1_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff)) R10=fp0
129: (25) if r1 > 0xb goto pc+83 ; frame1: R1_w=scalar(umax=11,var_off=(0x0; 0xf))
...
; arg_spec = &spec->args[arg_num];
135: (79) r1 = *(u64 *)(r10 -24) ; frame1: R1_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff)) R10=fp0
...
; switch (arg_spec->arg_type) {
139: (61) r1 = *(u32 *)(r2 +8)
R2 unbounded memory access, make sure to bounds check any such access
The reason is that, even though the C code enforces that
arg_num < BPF_USDT_MAX_ARG_CNT, the verifier cannot propagate this
constraint to the arg_spec assignment yet. Help it by forcing r1 back
to stack after comparison.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230128000650.1516334-23-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
GCC expects the always_inline attribute to only be set on inline
functions, as such we should make all functions with this attribute
use the __always_inline macro which makes the function inline and
sets the attribute.
Fixes errors like:
/home/buildroot/bpf-next/tools/testing/selftests/bpf/tools/include/bpf/bpf_tracing.h:439:1: error: ‘always_inline’ function might not be inlinable [-Werror=attributes]
439 | ____##name(unsigned long long *ctx, ##args)
| ^~~~
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20220803151403.793024-1-james.hilliard1@gmail.com
|
|
Libbpf supports single virtual __kconfig extern currently: LINUX_KERNEL_VERSION.
LINUX_KERNEL_VERSION isn't coming from /proc/kconfig.gz and is intead
customly filled out by libbpf.
This patch generalizes this approach to support more such virtual
__kconfig externs. One such extern added in this patch is
LINUX_HAS_BPF_COOKIE which is used for BPF-side USDT supporting code in
usdt.bpf.h instead of using CO-RE-based enum detection approach for
detecting bpf_get_attach_cookie() BPF helper. This allows to remove
otherwise not needed CO-RE dependency and keeps user-space and BPF-side
parts of libbpf's USDT support strictly in sync in terms of their
feature detection.
We'll use similar approach for syscall wrapper detection for
BPF_KSYSCALL() BPF-side macro in follow up patch.
Generally, currently libbpf reserves CONFIG_ prefix for Kconfig values
and LINUX_ for virtual libbpf-backed externs. In the future we might
extend the set of prefixes that are supported. This can be done without
any breaking changes, as currently any __kconfig extern with
unrecognized name is rejected.
For LINUX_xxx externs we support the normal "weak rule": if libbpf
doesn't recognize given LINUX_xxx extern but such extern is marked as
__weak, it is not rejected and defaults to zero. This follows
CONFIG_xxx handling logic and will allow BPF applications to
opportunistically use newer libbpf virtual externs without breaking on
older libbpf versions unnecessarily.
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220714070755.3235561-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Use __weak __hidden for bpf_usdt_xxx() APIs instead of much more
confusing `static inline __noinline`. This was previously impossible due
to libbpf erroring out on CO-RE relocations pointing to eliminated weak
subprogs. Now that previous patch fixed this issue, switch back to
__weak __hidden as it's a more direct way of specifying the desired
behavior.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220408181425.2287230-3-andrii@kernel.org
|
|
BPF_USDT_ARG_REG_DEREF handling always reads 8 bytes, regardless of
the actual argument size. On little-endian the relevant argument bits
end up in the lower bits of val, and later on the code that handles
all the argument types expects them to be there.
On big-endian they end up in the upper bits of val, breaking that
expectation. Fix by right-shifting val on big-endian.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220407214411.257260-3-iii@linux.ibm.com
|
|
Fix several typos and references to non-existing headers.
Also use __BYTE_ORDER__ instead of __BYTE_ORDER for consistency with
the rest of the bpf code - see commit 45f2bebc8079 ("libbpf: Fix
endianness detection in BPF_CORE_READ_BITFIELD_PROBED()") for
rationale).
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220407214411.257260-2-iii@linux.ibm.com
|
|
Add BPF-side implementation of libbpf-provided USDT support. This
consists of single header library, usdt.bpf.h, which is meant to be used
from user's BPF-side source code. This header is added to the list of
installed libbpf header, along bpf_helpers.h and others.
BPF-side implementation consists of two BPF maps:
- spec map, which contains "a USDT spec" which encodes information
necessary to be able to fetch USDT arguments and other information
(argument count, user-provided cookie value, etc) at runtime;
- IP-to-spec-ID map, which is only used on kernels that don't support
BPF cookie feature. It allows to lookup spec ID based on the place
in user application that triggers USDT program.
These maps have default sizes, 256 and 1024, which are chosen
conservatively to not waste a lot of space, but handling a lot of common
cases. But there could be cases when user application needs to either
trace a lot of different USDTs, or USDTs are heavily inlined and their
arguments are located in a lot of differing locations. For such cases it
might be necessary to size those maps up, which libbpf allows to do by
overriding BPF_USDT_MAX_SPEC_CNT and BPF_USDT_MAX_IP_CNT macros.
It is an important aspect to keep in mind. Single USDT (user-space
equivalent of kernel tracepoint) can have multiple USDT "call sites".
That is, single logical USDT is triggered from multiple places in user
application. This can happen due to function inlining. Each such inlined
instance of USDT invocation can have its own unique USDT argument
specification (instructions about the location of the value of each of
USDT arguments). So while USDT looks very similar to usual uprobe or
kernel tracepoint, under the hood it's actually a collection of uprobes,
each potentially needing different spec to know how to fetch arguments.
User-visible API consists of three helper functions:
- bpf_usdt_arg_cnt(), which returns number of arguments of current USDT;
- bpf_usdt_arg(), which reads value of specified USDT argument (by
it's zero-indexed position) and returns it as 64-bit value;
- bpf_usdt_cookie(), which functions like BPF cookie for USDT
programs; this is necessary as libbpf doesn't allow specifying actual
BPF cookie and utilizes it internally for USDT support implementation.
Each bpf_usdt_xxx() APIs expect struct pt_regs * context, passed into
BPF program. On kernels that don't support BPF cookie it is used to
fetch absolute IP address of the underlying uprobe.
usdt.bpf.h also provides BPF_USDT() macro, which functions like
BPF_PROG() and BPF_KPROBE() and allows much more user-friendly way to
get access to USDT arguments, if USDT definition is static and known to
the user. It is expected that majority of use cases won't have to use
bpf_usdt_arg_cnt() and bpf_usdt_arg() directly and BPF_USDT() will cover
all their needs.
Last, usdt.bpf.h is utilizing BPF CO-RE for one single purpose: to
detect kernel support for BPF cookie. If BPF CO-RE dependency is
undesirable, user application can redefine BPF_USDT_HAS_BPF_COOKIE to
either a boolean constant (or equivalently zero and non-zero), or even
point it to its own .rodata variable that can be specified from user's
application user-space code. It is important that
BPF_USDT_HAS_BPF_COOKIE is known to BPF verifier as static value (thus
.rodata and not just .data), as otherwise BPF code will still contain
bpf_get_attach_cookie() BPF helper call and will fail validation at
runtime, if not dead-code eliminated.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/20220404234202.331384-2-andrii@kernel.org
|
