summaryrefslogtreecommitdiff
path: root/tools/net/ynl
AgeCommit message (Collapse)AuthorFilesLines
2024-09-12selftests: add ncdevmem, netcat for devmem TCPMina Almasry1-0/+1
ncdevmem is a devmem TCP netcat. It works similarly to netcat, but it sends and receives data using the devmem TCP APIs. It uses udmabuf as the dmabuf provider. It is compatible with a regular netcat running on a peer, or a ncdevmem running on a peer. In addition to normal netcat support, ncdevmem has a validation mode, where it sends a specific pattern and validates this pattern on the receiver side to ensure data integrity. Suggested-by: Stanislav Fomichev <sdf@fomichev.me> Signed-off-by: Mina Almasry <almasrymina@google.com> Link: https://patch.msgid.link/20240910171458.219195-13-almasrymina@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-3/+4
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/phy/phy_device.c 2560db6ede1a ("net: phy: Fix missing of_node_put() for leds") 1dce520abd46 ("net: phy: Use for_each_available_child_of_node_scoped()") https://lore.kernel.org/20240904115823.74333648@canb.auug.org.au Adjacent changes: drivers/net/ethernet/xilinx/xilinx_axienet.h drivers/net/ethernet/xilinx/xilinx_axienet_main.c 858430db28a5 ("net: xilinx: axienet: Fix race in axienet_stop") 76abb5d675c4 ("net: xilinx: axienet: Add statistics support") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-06tools/net/ynl: fix cli.py --subscribe featureArkadiusz Kubalewski1-3/+4
Execution of command: ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/dpll.yaml / --subscribe "monitor" --sleep 10 fails with: File "/repo/./tools/net/ynl/cli.py", line 109, in main ynl.check_ntf() File "/repo/tools/net/ynl/lib/ynl.py", line 924, in check_ntf op = self.rsp_by_value[nl_msg.cmd()] KeyError: 19 Parsing Generic Netlink notification messages performs lookup for op in the message. The message was not yet decoded, and is not yet considered GenlMsg, thus msg.cmd() returns Generic Netlink family id (19) instead of proper notification command id (i.e.: DPLL_CMD_PIN_CHANGE_NTF=13). Allow the op to be obtained within NetlinkProtocol.decode(..) itself if the op was not passed to the decode function, thus allow parsing of Generic Netlink notifications without causing the failure. Suggested-by: Donald Hunter <donald.hunter@gmail.com> Link: https://lore.kernel.org/netdev/m2le0n5xpn.fsf@gmail.com/ Fixes: 0a966d606c68 ("tools/net/ynl: Fix extack decoding for directional ops") Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Link: https://patch.msgid.link/20240904135034.316033-1-arkadiusz.kubalewski@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-29tools: ynl: error check scanf() in a sampleJakub Kicinski1-1/+5
Someone reported on GitHub that the YNL NIPA test is failing when run locally. The test builds the tools, and it hits: netdev.c:82:9: warning: ignoring return value of ‘scanf’ declared with attribute ‘warn_unused_result’ [-Wunused-result] 82 | scanf("%d", &ifindex); I can't repro this on my setups but error seems clear enough. Link: https://github.com/linux-netdev/nipa/discussions/37 Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Link: https://patch.msgid.link/20240828173609.2951335-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-22tools: ynl: lift an assumption about spec file namePaolo Abeni1-2/+4
Currently the parsing code generator assumes that the yaml specification file name and the main 'name' attribute carried inside correspond, that is the field is the c-name representation of the file basename. The above assumption held true within the current tree, but will be hopefully broken soon by the upcoming net shaper specification. Additionally, it makes the field 'name' itself useless. Lift the assumption, always computing the generated include file name from the generated c file name. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Link: https://patch.msgid.link/24da5a3596d814beeb12bd7139a6b4f89756cc19.1724165948.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-06tools: ynl: remove extraneous ; after statementsColin Ian King1-2/+2
There are a couple of statements with two following semicolons, replace these with just one semicolon. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Link: https://patch.msgid.link/20240802113436.448939-1-colin.i.king@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-04tools: ynl: use ident name for Family, too.Paolo Abeni1-26/+26
This allow consistent naming convention between Family and others element's name. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Link: https://patch.msgid.link/9bbcab3094970b371bd47aa18481ae6ca5a93687.1719930479.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-03tools: net: package libynl for use in selftestsJakub Kicinski2-2/+8
Support building the C YNL userspace library into one big static file. We can then link selftests against it for easy to use C netlink interface. Signed-off-by: Mina Almasry <almasrymina@google.com> Link: https://patch.msgid.link/20240628003253.1694510-14-almasrymina@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-01tcp_metrics: add netlink protocol spec in YAMLJakub Kicinski1-0/+1
Add a protocol spec for tcp_metrics, so that it's accessible via YNL. Useful at the very least for testing fixes. In this episode of "10,000 ways to complicate netlink" the metric nest has defines which are off by 1. iproute2 does: struct rtattr *m[TCP_METRIC_MAX + 1 + 1]; parse_rtattr_nested(m, TCP_METRIC_MAX + 1, a); for (i = 0; i < TCP_METRIC_MAX + 1; i++) { // ... attr = m[i + 1]; This is too weird to support in YNL, add a new set of defines with _correct_ values to the official kernel header. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-28ethtool: Add an interface for flashing transceiver modules' firmwareDanielle Ratson1-1/+2
CMIS compliant modules such as QSFP-DD might be running a firmware that can be updated in a vendor-neutral way by exchanging messages between the host and the module as described in section 7.3.1 of revision 5.2 of the CMIS standard. Add a pair of new ethtool messages that allow: * User space to trigger firmware update of transceiver modules * The kernel to notify user space about the progress of the process The user interface is designed to be asynchronous in order to avoid RTNL being held for too long and to allow several modules to be updated simultaneously. The interface is designed with CMIS compliant modules in mind, but kept generic enough to accommodate future use cases, if these arise. Signed-off-by: Danielle Ratson <danieller@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-28tools: ynl: use display hints for formatting of scalar attrsJakub Kicinski1-0/+2
Use display hints for formatting scalar attrs. This is specifically useful for formatting IPv4 addresses carried typically as u32. Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Link: https://patch.msgid.link/20240626201234.2572964-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-09tools: ynl: make user space policies constJakub Kicinski4-13/+13
Dan, who's working on C++ YNL, pointed out that the C code does not make policies const. Sprinkle some 'const's around. Reported-by: Dan Melnic <dmm@meta.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-05-31tools: ynl: make the attr and msg helpers more C++ friendlyJakub Kicinski1-11/+11
Folks working on a C++ codegen would like to reuse the attribute helpers directly. Add the few necessary casts, it's not too ugly. Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Link: https://lore.kernel.org/r/20240529192031.3785761-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-30doc: netlink: Fix op pre and post fields in generated .rstDonald Hunter1-1/+4
The generated .rst has pre and post headings without any values, e.g. here: https://docs.kernel.org/6.9/networking/netlink_spec/dpll.html#device-id-get Emit keys and values in the generated .rst Signed-off-by: Donald Hunter <donald.hunter@gmail.com> Link: https://lore.kernel.org/r/20240528140652.9445-5-donald.hunter@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-30doc: netlink: Fix formatting of op flags in generated .rstDonald Hunter1-1/+3
Generate op flags as an inline list instead of a stringified python value. Signed-off-by: Donald Hunter <donald.hunter@gmail.com> Link: https://lore.kernel.org/r/20240528140652.9445-4-donald.hunter@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-30doc: netlink: Don't 'sanitize' op docstrings in generated .rstDonald Hunter1-1/+1
The doc strings for do/dump ops are emitted as toplevel .rst constructs so they can be multi-line. Pass multi-line text straight through to the .rst to retain any simple formatting from the .yaml This fixes e.g. list formatting for the pin-get docs in dpll.yaml: https://docs.kernel.org/6.9/networking/netlink_spec/dpll.html#pin-get Signed-off-by: Donald Hunter <donald.hunter@gmail.com> Link: https://lore.kernel.org/r/20240528140652.9445-3-donald.hunter@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-30doc: netlink: Fix generated .rst for multi-line docsDonald Hunter1-1/+1
Fix the newline replacement in ynl-gen-rst.py to put spaces between concatenated lines. This fixes the broken doc string formatting. See the dpll docs for an example of broken concatenation: https://docs.kernel.org/6.9/networking/netlink_spec/dpll.html#lock-status Signed-off-by: Donald Hunter <donald.hunter@gmail.com> Link: https://lore.kernel.org/r/20240528140652.9445-2-donald.hunter@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-14ynl: ensure exact-len value is resolvedAntonio Quartulli1-2/+2
For type String and Binary we are currently usinig the exact-len limit value as is without attempting any name resolution. However, the spec may specify the name of a constant rather than an actual value, which would result in using the constant name as is and thus break the policy. Ensure the limit value is passed to get_limit(), which will always attempt resolving the name before printing the policy rule. Signed-off-by: Antonio Quartulli <a@unstable.cc> Link: https://lore.kernel.org/r/20240510232202.24051-1-a@unstable.cc Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-04tools: ynl: add --list-ops and --list-msgs to CLIJakub Kicinski2-0/+11
I often forget the exact naming of ops and have to look at the spec to find it. Add support for listing the operations: $ ./cli.py --spec .../netdev.yaml --list-ops dev-get [ do, dump ] page-pool-get [ do, dump ] page-pool-stats-get [ do, dump ] queue-get [ do, dump ] napi-get [ do, dump ] qstats-get [ dump ] For completeness also support listing all ops (including notifications: # ./cli.py --spec .../netdev.yaml --list-msgs dev-get [ dump, do ] dev-add-ntf [ notify ] dev-del-ntf [ notify ] dev-change-ntf [ notify ] page-pool-get [ dump, do ] page-pool-add-ntf [ notify ] page-pool-del-ntf [ notify ] page-pool-change-ntf [ notify ] page-pool-stats-get [ dump, do ] queue-get [ dump, do ] napi-get [ dump, do ] qstats-get [ dump ] Use double space after the name for slightly easier to read output. Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Link: https://lore.kernel.org/r/20240502164043.2130184-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-27tools: ynl: don't append doc of missing type directly to the typeJakub Kicinski1-3/+2
When using YNL in tests appending the doc string to the type name makes it harder to check that we got the correct error. Put the doc under a separate key. Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Link: https://lore.kernel.org/r/20240426003111.359285-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+1
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/ti/icssg/icssg_prueth.c net/mac80211/chan.c 89884459a0b9 ("wifi: mac80211: fix idle calculation with multi-link") 87f5500285fb ("wifi: mac80211: simplify ieee80211_assign_link_chanctx()") https://lore.kernel.org/all/20240422105623.7b1fbda2@canb.auug.org.au/ net/unix/garbage.c 1971d13ffa84 ("af_unix: Suppress false-positive lockdep splat for spin_lock() in __unix_gc().") 4090fa373f0e ("af_unix: Replace garbage collection algorithm.") drivers/net/ethernet/ti/icssg/icssg_prueth.c drivers/net/ethernet/ti/icssg/icssg_common.c 4dcd0e83ea1d ("net: ti: icssg-prueth: Fix signedness bug in prueth_init_rx_chns()") e2dc7bfd677f ("net: ti: icssg-prueth: Move common functions into a separate file") No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-23tools: ynl: don't ignore errors in NLMSG_DONE messagesJakub Kicinski1-0/+1
NLMSG_DONE contains an error code, it has to be extracted. Prior to this change all dumps will end in success, and in case of failure the result is silently truncated. Fixes: e4b48ed460d3 ("tools: ynl: add a completely generic client") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Link: https://lore.kernel.org/r/20240420020827.3288615-1-kuba@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-04-23tools/net/ynl: Add multi message support to ynlDonald Hunter2-22/+71
Add a "--multi <do-op> <json>" command line to ynl that makes it possible to add several operations to a single netlink request payload. The --multi command line option is repeated for each operation. This is used by the nftables family for transaction batches. For example: ./tools/net/ynl/cli.py \ --spec Documentation/netlink/specs/nftables.yaml \ --multi batch-begin '{"res-id": 10}' \ --multi newtable '{"name": "test", "nfgen-family": 1}' \ --multi newchain '{"name": "chain", "table": "test", "nfgen-family": 1}' \ --multi batch-end '{"res-id": 10}' [None, None, None, None] It can also be used for bundling get requests: ./tools/net/ynl/cli.py \ --spec Documentation/netlink/specs/nftables.yaml \ --multi gettable '{"name": "test", "nfgen-family": 1}' \ --multi getchain '{"name": "chain", "table": "test", "nfgen-family": 1}' \ --output-json [{"name": "test", "use": 1, "handle": 1, "flags": [], "nfgen-family": 1, "version": 0, "res-id": 2}, {"table": "test", "name": "chain", "handle": 1, "use": 0, "nfgen-family": 1, "version": 0, "res-id": 2}] Signed-off-by: Donald Hunter <donald.hunter@gmail.com> Link: https://lore.kernel.org/r/20240418104737.77914-4-donald.hunter@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-23tools/net/ynl: Fix extack decoding for directional opsDonald Hunter1-8/+6
NetlinkProtocol.decode() was looking up ops by response value which breaks when it is used for extack decoding of directional ops. Instead, pass the op to decode(). Signed-off-by: Donald Hunter <donald.hunter@gmail.com> Link: https://lore.kernel.org/r/20240418104737.77914-3-donald.hunter@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-15tools: ynl: don't return None for dumpsJakub Kicinski1-1/+3
YNL currently reports None for empty dump: $ cli.py ...netdev.yaml --dump page-pool-get None This doesn't matter for the CLI but when writing YNL based tests having to deal with either list or None is annoying. Limit the None conversion to non-dump ops: $ cli.py ...netdev.yaml --dump page-pool-get [] Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Link: https://lore.kernel.org/r/20240412141436.828666-3-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-06ynl: support binary and integer sub-type for indexed-arrayHangbin Liu1-0/+10
Add binary and integer sub-type support for indexed-array to display bond arp and ns targets. Here is what the result looks like: # ip link add bond0 type bond mode 1 \ arp_ip_target 192.168.1.1,192.168.1.2 ns_ip6_target 2001::1,2001::2 # ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/rt_link.yaml \ --do getlink --json '{"ifname": "bond0"}' --output-json | jq '.linkinfo' "arp-ip-target": [ "192.168.1.1", "192.168.1.2" ], [...] "ns-ip6-target": [ "2001::1", "2001::2" ], Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://lore.kernel.org/r/20240404063114.1221532-3-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-06ynl: rename array-nest to indexed-arrayHangbin Liu2-11/+20
Some implementations, like bonding, has nest array with same attr type. To support all kinds of entries under one nest array. As discussed[1], let's rename array-nest to indexed-array, and assuming the value is a nest by passing the type via sub-type. [1] https://lore.kernel.org/netdev/20240312100105.16a59086@kernel.org/ Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://lore.kernel.org/r/20240404063114.1221532-2-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-06tools: ynl: ethtool.py: Output timestamping statistics from tsinfo-get operationRahul Rameshbabu1-1/+10
Print the nested stats attribute containing timestamping statistics when the --show-time-stamping flag is used. [root@binary-eater-vm-01 linux-ethtool-ts]# ./tools/net/ynl/ethtool.py --show-time-stamping mlx5_1 Time stamping parameters for mlx5_1: Capabilities: hardware-transmit hardware-receive hardware-raw-clock PTP Hardware Clock: 0 Hardware Transmit Timestamp Modes: off on Hardware Receive Filter Modes: none all Statistics: tx-pkts: 8 tx-lost: 0 tx-err: 0 Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Link: https://lore.kernel.org/r/20240403212931.128541-8-rrameshbabu@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-04tools: ynl: copy netlink error to NlErrorJakub Kicinski1-1/+2
Typing e.nl_msg.error when processing exception is a bit tedious and counter-intuitive. Set a local .error member to the positive value of the netlink level error. Reviewed-by: Petr Machata <petrm@nvidia.com> Link: https://lore.kernel.org/r/20240403023426.1762996-3-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-04tools: ynl: ethtool.py: Make tool invokable from any CWDRahul Rameshbabu1-2/+6
ethtool.py depends on yml files in a specific location of the linux kernel tree. Using relative lookup for those files means that ethtool.py would need to be run under tools/net/ynl/. Lookup needed yml files without depending on the current working directory that ethtool.py is invoked from. Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Link: https://lore.kernel.org/r/20240402204000.115081-1-rrameshbabu@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-03tools: ynl: add ynl_dump_empty() helperJakub Kicinski2-0/+14
Checking if dump is empty requires a couple of casts. Add a convenient wrapper. Add an example use in the netdev sample, loopback is always present so an empty dump is an error. Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Link: https://lore.kernel.org/r/20240329181651.319326-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-02doc: netlink: Add hyperlinks to generated Netlink docsDonald Hunter1-18/+42
Update ynl-gen-rst to generate hyperlinks to definitions, attribute sets and sub-messages from all the places that reference them. Note that there is a single label namespace for all of the kernel docs. Hyperlinks within a single netlink doc need to be qualified by the family name to avoid collisions. The label format is 'family-type-name' which gives, for example, 'rt-link-attribute-set-link-attrs' as the link id. Signed-off-by: Donald Hunter <donald.hunter@gmail.com> Link: https://lore.kernel.org/r/20240329135021.52534-3-donald.hunter@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-02doc: netlink: Change generated docs to limit TOC to depth 3Donald Hunter1-1/+1
The tables of contents in the generated Netlink docs include individual attribute definitions. This can make the contents exceedingly long and repeats a lot of what is on the rest of the pages. See for example: https://docs.kernel.org/networking/netlink_spec/tc.html Add a depth limit to the contents directive in generated .rst files to limit the contents depth to 3 levels. This reduces the contents to: - Family - Summary - Operations - op-one - op-two - ... - Definitions - struct-one - struct-two - enum-one - ... - Attribute sets - attrs-one - attrs-two - ... Signed-off-by: Donald Hunter <donald.hunter@gmail.com> Reviewed-by: Breno Leitao <leitao@debian.org> Link: https://lore.kernel.org/r/20240329135021.52534-2-donald.hunter@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-29tools/net/ynl: Add extack policy attribute decodingDonald Hunter1-0/+46
The NLMSGERR_ATTR_POLICY extack attribute has been ignored by ynl up to now. Extend extack decoding to include _POLICY and the nested NL_POLICY_TYPE_ATTR_* attributes. For example: ./tools/net/ynl/cli.py \ --spec Documentation/netlink/specs/rt_link.yaml \ --create --do newlink --json '{ "ifname": "12345678901234567890", "linkinfo": {"kind": "bridge"} }' Netlink error: Numerical result out of range nl_len = 104 (88) nl_flags = 0x300 nl_type = 2 error: -34 extack: {'msg': 'Attribute failed policy validation', 'policy': {'max-length': 15, 'type': 'string'}, 'bad-attr': '.ifname'} Signed-off-by: Donald Hunter <donald.hunter@gmail.com> Link: https://lore.kernel.org/r/20240328155636.64688-1-donald.hunter@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-29ynl: support hex display_hint for integerHangbin Liu1-1/+4
Some times it would be convenient to read the integer as hex, like mask values. Suggested-by: Donald Hunter <donald.hunter@gmail.com> Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://lore.kernel.org/r/20240327123130.1322921-2-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-23tools: ynl: fix setting presence bits in simple nestsJakub Kicinski1-2/+5
When we set members of simple nested structures in requests we need to set "presence" bits for all the nesting layers below. This has nothing to do with the presence type of the last layer. Fixes: be5bea1cc0bf ("net: add basic C code generators for Netlink") Reviewed-by: Breno Leitao <leitao@debian.org> Link: https://lore.kernel.org/r/20240321020214.1250202-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-19tools: ynl: add header guards for nlctrlJakub Kicinski1-0/+1
I "extracted" YNL C into a GitHub repo to make it easier to use in other projects: https://github.com/linux-netdev/ynl-c GitHub actions use Ubuntu by default, and the kernel headers there are missing f329a0ebeaba ("genetlink: correct uAPI defines"). Add the direct include workaround for nlctrl. Fixes: 768e044a5fd4 ("doc/netlink/specs: Add spec for nlctrl netlink family") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Link: https://lore.kernel.org/r/20240315002108.523232-1-kuba@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-03-12netlink: specs: support generating code for genl socket privJakub Kicinski2-0/+12
The family struct is auto-generated for new families, support use of the sock_priv_* mechanism added in commit a731132424ad ("genetlink: introduce per-sock family private storage"). For example if the family wants to use struct sk_buff as its private struct (unrealistic but just for illustration), it would add to its spec: kernel-family: headers: [ "linux/skbuff.h" ] sock-priv: struct sk_buff ynl-gen-c will declare the appropriate priv size and hook in function prototypes to be implemented by the family. Link: https://lore.kernel.org/r/20240308190319.2523704-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-12tools: ynl: remove trailing semicolonJakub Kicinski1-1/+1
Commit e8a6c515ff5f ("tools: ynl: allow user to pass enum string instead of scalar value") added a semicolon at the end of a line. Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20240308192555.2550253-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-11tools: ynl-gen: support using pre-defined values in attr checksHangbin Liu1-0/+2
Support using pre-defined values in checks so we don't need to use hard code number for the string, binary length. e.g. we have a definition like #define TEAM_STRING_MAX_LEN 32 Which defined in yaml like: definitions: - name: string-max-len type: const value: 32 It can be used in the attribute-sets like attribute-sets: - name: attr-option name-prefix: team-attr-option- attributes: - name: name type: string checks: len: string-max-len With this patch it will be converted to [TEAM_ATTR_OPTION_NAME] = { .type = NLA_STRING, .len = TEAM_STRING_MAX_LEN, } Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://lore.kernel.org/r/20240311140727.109562-1-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-11ynl: samples: fix recycling rate calculationJakub Kicinski1-0/+2
Running the page-pool sample on production machines under moderate networking load shows recycling rate higher than 100%: $ page-pool eth0[2] page pools: 14 (zombies: 0) refs: 89088 bytes: 364904448 (refs: 0 bytes: 0) recycling: 100.3% (alloc: 1392:2290247724 recycle: 469289484:1828235386) Note that outstanding refs (89088) == slow alloc * cache size (1392 * 64) which means this machine is recycling page pool pages perfectly, not a single page has been released. The extra 0.3% is because sample ignores allocations from the ptr_ring. Treat those the same as alloc_fast, the ring vs cache alloc is already captured accurately enough by recycling stats. With the fix: $ page-pool eth0[2] page pools: 14 (zombies: 0) refs: 89088 bytes: 364904448 (refs: 0 bytes: 0) recycling: 100.0% (alloc: 1392:2331141604 recycle: 473625579:1857460661) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-09tools: ynl: Fix spelling mistake "Constructred" -> "Constructed"Colin Ian King1-1/+1
There is a spelling mistake in an error message. Fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20240308084458.2045266-1-colin.i.king@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-08tools/net/ynl: Add nest-type-value decodingDonald Hunter1-0/+12
The nlctrl genetlink-legacy family uses nest-type-value encoding as described in Documentation/userspace-api/netlink/genetlink-legacy.rst Add nest-type-value decoding to ynl. Signed-off-by: Donald Hunter <donald.hunter@gmail.com> Link: https://lore.kernel.org/r/20240306231046.97158-5-donald.hunter@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-08tools/net/ynl: Fix c codegen for array-nestDonald Hunter1-1/+1
ynl-gen-c generates e.g. 'calloc(mcast_groups, sizeof(*dst->mcast_groups))' for array-nest attrs when it should be 'n_mcast_groups'. Add a 'n_' prefix in the generated code for array-nests. Signed-off-by: Donald Hunter <donald.hunter@gmail.com> Link: https://lore.kernel.org/r/20240306231046.97158-4-donald.hunter@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-08tools/net/ynl: Report netlink errors without stacktraceDonald Hunter2-9/+13
ynl does not handle NlError exceptions so they get reported like program failures. Handle the NlError exceptions and report the netlink errors more cleanly. Example now: Netlink error: No such file or directory nl_len = 44 (28) nl_flags = 0x300 nl_type = 2 error: -2 extack: {'bad-attr': '.op'} Example before: Traceback (most recent call last): File "/home/donaldh/net-next/./tools/net/ynl/cli.py", line 81, in <module> main() File "/home/donaldh/net-next/./tools/net/ynl/cli.py", line 69, in main reply = ynl.dump(args.dump, attrs) ^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/donaldh/net-next/tools/net/ynl/lib/ynl.py", line 906, in dump return self._op(method, vals, [], dump=True) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/donaldh/net-next/tools/net/ynl/lib/ynl.py", line 872, in _op raise NlError(nl_msg) lib.ynl.NlError: Netlink error: No such file or directory nl_len = 44 (28) nl_flags = 0x300 nl_type = 2 error: -2 extack: {'bad-attr': '.op'} Signed-off-by: Donald Hunter <donald.hunter@gmail.com> Link: https://lore.kernel.org/r/20240306231046.97158-3-donald.hunter@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-08tools/net/ynl: Fix extack decoding for netlink-rawDonald Hunter1-1/+6
Extack decoding was using a hard-coded msg header size of 20 but netlink-raw has a header size of 16. Use a protocol specific msghdr_size() when decoding the attr offssets. Signed-off-by: Donald Hunter <donald.hunter@gmail.com> Link: https://lore.kernel.org/r/20240306231046.97158-2-donald.hunter@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-07tools: ynl: check for overflow of constructed messagesJakub Kicinski3-4/+68
Donald points out that we don't check for overflows. Stash the length of the message on nlmsg_pid (nlmsg_seq would do as well). This allows the attribute helpers to remain self-contained (no extra arguments). Also let the put helpers continue to return nothing. The error is checked only in (newly introduced) ynl_msg_end(). Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Link: https://lore.kernel.org/r/20240305185000.964773-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-06tools: ynl: add --dbg-small-recv for easier kernel testingJakub Kicinski1-1/+6
Most "production" netlink clients use large buffers to make dump efficient, which means that handling of dump continuation in the kernel is not very well tested. Add an option for debugging / testing handling of dumps. It enables printing of extra netlink-level debug and lowers the recv() buffer size in one go. When used without any argument (--dbg-small-recv) it picks a very small default (4000), explicit size can be set, too (--dbg-small-recv 5000). Example: $ ./cli.py [...] --dbg-small-recv Recv: read 3712 bytes, 29 messages nl_len = 128 (112) nl_flags = 0x0 nl_type = 19 [...] nl_len = 128 (112) nl_flags = 0x0 nl_type = 19 Recv: read 3968 bytes, 31 messages nl_len = 128 (112) nl_flags = 0x0 nl_type = 19 [...] nl_len = 128 (112) nl_flags = 0x0 nl_type = 19 Recv: read 532 bytes, 5 messages nl_len = 128 (112) nl_flags = 0x0 nl_type = 19 [...] nl_len = 128 (112) nl_flags = 0x0 nl_type = 19 nl_len = 20 (4) nl_flags = 0x2 nl_type = 3 (the [...] are edits to shorten the commit message). Note that the first message of the dump is sized conservatively by the kernel. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-06tools: ynl: support debug printing messagesJakub Kicinski1-0/+15
For manual debug, allow printing the netlink level messages to stderr. Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-06tools: ynl: allow setting recv() sizeJakub Kicinski1-3/+18
Make the size of the buffer we use for recv() configurable. The details of the buffer sizing in netlink are somewhat arcane, we could spend a lot of time polishing this API. Let's just leave some hopefully helpful comments for now. This is a for-developers-only feature, anyway. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-01 05:51:22 +0300