summaryrefslogtreecommitdiff
path: root/tools/objtool
AgeCommit message (Collapse)AuthorFilesLines
2021-03-12objtool,x86: Fix uaccess PUSHF/POPF validationPeter Zijlstra1-0/+3
Commit ab234a260b1f ("x86/pv: Rework arch_local_irq_restore() to not use popf") replaced "push %reg; popf" with something like: "test $0x200, %reg; jz 1f; sti; 1:", which breaks the pushf/popf symmetry that commit ea24213d8088 ("objtool: Add UACCESS validation") relies on. The result is: drivers/gpu/drm/amd/amdgpu/si.o: warning: objtool: si_common_hw_init()+0xf36: PUSHF stack exhausted Meanwhile, commit c9c324dc22aa ("objtool: Support stack layout changes in alternatives") makes that we can actually use stack-ops in alternatives, which means we can revert 1ff865e343c2 ("x86,smap: Fix smap_{save,restore}() alternatives"). That in turn means we can limit the PUSHF/POPF handling of ea24213d8088 to those instructions that are in alternatives. Fixes: ab234a260b1f ("x86/pv: Rework arch_local_irq_restore() to not use popf") Reported-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lkml.kernel.org/r/YEY4rIbQYa5fnnEp@hirez.programming.kicks-ass.net
2021-02-25Merge tag 'x86-entry-2021-02-24' of ↵Linus Torvalds1-0/+14
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 irq entry updates from Thomas Gleixner: "The irq stack switching was moved out of the ASM entry code in course of the entry code consolidation. It ended up being suboptimal in various ways. This reworks the X86 irq stack handling: - Make the stack switching inline so the stackpointer manipulation is not longer at an easy to find place. - Get rid of the unnecessary indirect call. - Avoid the double stack switching in interrupt return and reuse the interrupt stack for softirq handling. - A objtool fix for CONFIG_FRAME_POINTER=y builds where it got confused about the stack pointer manipulation" * tag 'x86-entry-2021-02-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Fix stack-swizzle for FRAME_POINTER=y um: Enforce the usage of asm-generic/softirq_stack.h x86/softirq/64: Inline do_softirq_own_stack() softirq: Move do_softirq_own_stack() to generic asm header softirq: Move __ARCH_HAS_DO_SOFTIRQ to Kconfig x86: Select CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK x86/softirq: Remove indirection in do_softirq_own_stack() x86/entry: Use run_sysvec_on_irqstack_cond() for XEN upcall x86/entry: Convert device interrupts to inline stack switching x86/entry: Convert system vectors to irq stack macro x86/irq: Provide macro for inlining irq stack switching x86/apic: Split out spurious handling code x86/irq/64: Adjust the per CPU irq stack pointer by 8 x86/irq: Sanitize irq stack tracking x86/entry: Fix instrumentation annotation
2021-02-25kasan: prefix global functions with kasan_Andrey Konovalov1-1/+1
Patch series "kasan: HW_TAGS tests support and fixes", v4. This patchset adds support for running KASAN-KUnit tests with the hardware tag-based mode and also contains a few fixes. This patch (of 15): There's a number of internal KASAN functions that are used across multiple source code files and therefore aren't marked as static inline. To avoid littering the kernel function names list with generic function names, prefix all such KASAN functions with kasan_. As a part of this change: - Rename internal (un)poison_range() to kasan_(un)poison() (no _range) to avoid name collision with a public kasan_unpoison_range(). - Rename check_memory_region() to kasan_check_range(), as it's a more fitting name. Link: https://lkml.kernel.org/r/cover.1610733117.git.andreyknvl@google.com Link: https://linux-review.googlesource.com/id/I719cc93483d4ba288a634dba80ee6b7f2809cd26 Link: https://lkml.kernel.org/r/13777aedf8d3ebbf35891136e1f2287e2f34aaba.1610733117.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Suggested-by: Marco Elver <elver@google.com> Reviewed-by: Marco Elver <elver@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Peter Collingbourne <pcc@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-24Merge tag 'clang-lto-v5.12-rc1-part2' of ↵Linus Torvalds6-8/+104
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull more clang LTO updates from Kees Cook: "Clang LTO x86 enablement. Full disclosure: while this has _not_ been in linux-next (since it initially looked like the objtool dependencies weren't going to make v5.12), it has been under daily build and runtime testing by Sami for quite some time. These x86 portions have been discussed on lkml, with Peter, Josh, and others helping nail things down. The bulk of the changes are to get objtool working happily. The rest of the x86 enablement is very small. Summary: - Generate __mcount_loc in objtool (Peter Zijlstra) - Support running objtool against vmlinux.o (Sami Tolvanen) - Clang LTO enablement for x86 (Sami Tolvanen)" Link: https://lore.kernel.org/lkml/20201013003203.4168817-26-samitolvanen@google.com/ Link: https://lore.kernel.org/lkml/cover.1611263461.git.jpoimboe@redhat.com/ * tag 'clang-lto-v5.12-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: kbuild: lto: force rebuilds when switching CONFIG_LTO x86, build: allow LTO to be selected x86, cpu: disable LTO for cpu.c x86, vdso: disable LTO only for vDSO kbuild: lto: postpone objtool objtool: Split noinstr validation from --vmlinux x86, build: use objtool mcount tracing: add support for objtool mcount objtool: Don't autodetect vmlinux.o objtool: Fix __mcount_loc generation with Clang's assembler objtool: Add a pass for generating __mcount_loc
2021-02-23objtool: Split noinstr validation from --vmlinuxSami Tolvanen3-3/+4
This change adds a --noinstr flag to objtool to allow us to specify that we're processing vmlinux.o without also enabling noinstr validation. This is needed to avoid false positives with LTO when we run objtool on vmlinux.o without CONFIG_DEBUG_ENTRY. Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
2021-02-23objtool: Don't autodetect vmlinux.oSami Tolvanen1-5/+1
With LTO, we run objtool on vmlinux.o, but don't want noinstr validation. This change requires --vmlinux to be passed to objtool explicitly. Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Reviewed-by: Kees Cook <keescook@chromium.org>
2021-02-23objtool: Fix __mcount_loc generation with Clang's assemblerSami Tolvanen1-2/+15
When objtool generates relocations for the __mcount_loc section, it tries to reference __fentry__ calls by their section symbol offset. However, this fails with Clang's integrated assembler as it may not generate section symbols for every section. This patch looks up a function symbol instead if the section symbol is missing, similarly to commit e81e07244325 ("objtool: Support Clang non-section symbols in ORC generation"). Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
2021-02-23objtool: Add a pass for generating __mcount_locPeter Zijlstra6-2/+88
Add the --mcount option for generating __mcount_loc sections needed for dynamic ftrace. Using this pass requires the kernel to be compiled with -mfentry and CC_USING_NOP_MCOUNT to be defined in Makefile. Link: https://lore.kernel.org/lkml/20200625200235.GQ4781@hirez.programming.kicks-ass.net/ Signed-off-by: Peter Zijlstra <peterz@infradead.org> [Sami: rebased, dropped config changes, fixed to actually use --mcount, and wrote a commit message.] Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Reviewed-by: Kees Cook <keescook@chromium.org>
2021-02-23Merge tag 'objtool-core-2021-02-23' of ↵Linus Torvalds27-379/+621
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool updates from Thomas Gleixner: - Make objtool work for big-endian cross compiles - Make stack tracking via stack pointer memory operations match push/pop semantics to prepare for architectures w/o PUSH/POP instructions. - Add support for analyzing alternatives - Improve retpoline detection and handling - Improve assembly code coverage on x86 - Provide support for inlined stack switching * tag 'objtool-core-2021-02-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits) objtool: Support stack-swizzle objtool,x86: Additionally decode: mov %rsp, (%reg) x86/unwind/orc: Change REG_SP_INDIRECT x86/power: Support objtool validation in hibernate_asm_64.S x86/power: Move restore_registers() to top of the file x86/power: Annotate indirect branches as safe x86/acpi: Support objtool validation in wakeup_64.S x86/acpi: Annotate indirect branch as safe x86/ftrace: Support objtool vmlinux.o validation in ftrace_64.S x86/xen/pvh: Annotate indirect branch as safe x86/xen: Support objtool vmlinux.o validation in xen-head.S x86/xen: Support objtool validation in xen-asm.S objtool: Add xen_start_kernel() to noreturn list objtool: Combine UNWIND_HINT_RET_OFFSET and UNWIND_HINT_FUNC objtool: Add asm version of STACK_FRAME_NON_STANDARD objtool: Assume only ELF functions do sibling calls x86/ftrace: Add UNWIND_HINT_FUNC annotation for ftrace_stub objtool: Support retpoline jump detection for vmlinux.o objtool: Fix ".cold" section suffix check for newer versions of GCC objtool: Fix retpoline detection in asm code ...
2021-02-22objtool: Fix stack-swizzle for FRAME_POINTER=yPeter Zijlstra1-0/+14
When objtool encounters the stack-swizzle: mov %rsp, (%[tos]) mov %[tos], %rsp ... pop %rsp Inside a FRAME_POINTER=y build, things go a little screwy because clearly we're not adjusting the cfa->base. This then results in the pop %rsp not being detected as a restore of cfa->base so it will turn into a regular POP and offset the stack, resulting in: kernel/softirq.o: warning: objtool: do_softirq()+0xdb: return with modified stack frame Therefore, have "mov %[tos], %rsp" act like a PUSH (it sorta is anyway) to balance the things out. We're not too concerned with the actual stack_size for frame-pointer builds, since we don't generate ORC data for them anyway. Fixes: aafeb14e9da2 ("objtool: Support stack-swizzle") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lkml.kernel.org/r/YC6UC+rc9KKmQrkd@hirez.programming.kicks-ass.net
2021-02-17static_call: Allow module use without exposing static_call_keyJosh Poimboeuf1-2/+15
When exporting static_call_key; with EXPORT_STATIC_CALL*(), the module can use static_call_update() to change the function called. This is not desirable in general. Not exporting static_call_key however also disallows usage of static_call(), since objtool needs the key to construct the static_call_site. Solve this by allowing objtool to create the static_call_site using the trampoline address when it builds a module and cannot find the static_call_key symbol. The module loader will then try and map the trampole back to a key before it constructs the normal sites list. Doing this requires a trampoline -> key associsation, so add another magic section that keeps those. Originally-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20210127231837.ifddpn7rhwdaepiu@treble
2021-02-17rbtree: Add generic add and find helpersPeter Zijlstra1-62/+11
I've always been bothered by the endless (fragile) boilerplate for rbtree, and I recently wrote some rbtree helpers for objtool and figured I should lift them into the kernel and use them more widely. Provide: partial-order; less() based: - rb_add(): add a new entry to the rbtree - rb_add_cached(): like rb_add(), but for a rb_root_cached total-order; cmp() based: - rb_find(): find an entry in an rbtree - rb_find_add(): find an entry, and add if not found - rb_find_first(): find the first (leftmost) matching entry - rb_next_match(): continue from rb_find_first() - rb_for_each(): iterate a sub-tree using the previous two Inlining and constant propagation should see the compiler inline the whole thing, including the various compare functions. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Michel Lespinasse <walken@google.com> Acked-by: Davidlohr Bueso <dbueso@suse.de>
2021-02-12Merge branch 'x86/paravirt' into x86/entryIngo Molnar2-11/+17
Merge in the recent paravirt changes to resolve conflicts caused by objtool annotations. Conflicts: arch/x86/xen/xen-asm.S Signed-off-by: Ingo Molnar <mingo@kernel.org>
2021-02-10objtool: Support stack-swizzlePeter Zijlstra1-0/+45
Natively support the stack swizzle pattern: mov %rsp, (%[tos]) mov %[tos], %rsp ... pop %rsp It uses the vals[] array to link the first two stack-ops, and detect the SP to SP_INDIRECT swizzle. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
2021-02-10objtool,x86: Additionally decode: mov %rsp, (%reg)Peter Zijlstra1-8/+34
Where we already decode: mov %rsp, %reg, also decode mov %rsp, (%reg). Nothing should match for this new stack-op. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
2021-02-10x86/unwind/orc: Change REG_SP_INDIRECTPeter Zijlstra1-1/+1
Currently REG_SP_INDIRECT is unused but means (%rsp + offset), change it to mean (%rsp) + offset. The reason is that we're going to swizzle stack in the middle of a C function with non-trivial stack footprint. This means that when the unwinder finds the ToS, it needs to dereference it (%rsp) and then add the offset to the next frame, resulting in: (%rsp) + offset This is somewhat unfortunate, since REG_BP_INDIRECT is used (by DRAP) and thus needs to retain the current (%rbp + offset). Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
2021-01-26objtool: Add xen_start_kernel() to noreturn listJosh Poimboeuf1-0/+1
xen_start_kernel() doesn't return. Annotate it as such so objtool can follow the code flow. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lore.kernel.org/r/930deafa89256c60b180442df59a1bbae48f30ab.1611263462.git.jpoimboe@redhat.com
2021-01-26objtool: Combine UNWIND_HINT_RET_OFFSET and UNWIND_HINT_FUNCJosh Poimboeuf3-25/+17
The ORC metadata generated for UNWIND_HINT_FUNC isn't actually very func-like. With certain usages it can cause stack state mismatches because it doesn't set the return address (CFI_RA). Also, users of UNWIND_HINT_RET_OFFSET no longer need to set a custom return stack offset. Instead they just need to specify a func-like situation, so the current ret_offset code is hacky for no good reason. Solve both problems by simplifying the RET_OFFSET handling and converting it into a more useful UNWIND_HINT_FUNC. If we end up needing the old 'ret_offset' functionality again in the future, we should be able to support it pretty easily with the addition of a custom 'sp_offset' in UNWIND_HINT_FUNC. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lore.kernel.org/r/db9d1f5d79dddfbb3725ef6d8ec3477ad199948d.1611263462.git.jpoimboe@redhat.com
2021-01-26objtool: Assume only ELF functions do sibling callsJosh Poimboeuf1-14/+22
There's an inconsistency in how sibling calls are detected in non-function asm code, depending on the scope of the object. If the target code is external to the object, objtool considers it a sibling call. If the target code is internal but not a function, objtool *doesn't* consider it a sibling call. This can cause some inconsistencies between per-object and vmlinux.o validation. Instead, assume only ELF functions can do sibling calls. This generally matches existing reality, and makes sibling call validation consistent between vmlinux.o and per-object. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lore.kernel.org/r/0e9ab6f3628cc7bf3bde7aa6762d54d7df19ad78.1611263461.git.jpoimboe@redhat.com
2021-01-26objtool: Support retpoline jump detection for vmlinux.oJosh Poimboeuf1-4/+4
Objtool converts direct retpoline jumps to type INSN_JUMP_DYNAMIC, since that's what they are semantically. That conversion doesn't work in vmlinux.o validation because the indirect thunk function is present in the object, so the intra-object jump check succeeds before the retpoline jump check gets a chance. Rearrange the checks: check for a retpoline jump before checking for an intra-object jump. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lore.kernel.org/r/4302893513770dde68ddc22a9d6a2a04aca491dd.1611263461.git.jpoimboe@redhat.com
2021-01-26objtool: Fix ".cold" section suffix check for newer versions of GCCJosh Poimboeuf1-2/+2
With my version of GCC 9.3.1 the ".cold" subfunctions no longer have a numbered suffix, so the trailing period is no longer there. Presumably this doesn't yet trigger a user-visible bug since most of the subfunction detection logic is duplicated. I only found it when testing vmlinux.o validation. Fixes: 54262aa28301 ("objtool: Fix sibling call detection") Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lore.kernel.org/r/ca0b5a57f08a2fbb48538dd915cc253b5edabb40.1611263461.git.jpoimboe@redhat.com
2021-01-26objtool: Fix retpoline detection in asm codeJosh Poimboeuf3-2/+14
The JMP_NOSPEC macro branches to __x86_retpoline_*() rather than the __x86_indirect_thunk_*() wrappers used by C code. Detect jumps to __x86_retpoline_*() as retpoline dynamic jumps. Presumably this doesn't trigger a user-visible bug. I only found it when testing vmlinux.o validation. Fixes: 39b735332cb8 ("objtool: Detect jumps to retpoline thunks") Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lore.kernel.org/r/31f5833e2e4f01e3d755889ac77e3661e906c09f.1611263461.git.jpoimboe@redhat.com
2021-01-26objtool: Fix error handling for STD/CLD warningsJosh Poimboeuf1-2/+6
Actually return an error (and display a backtrace, if requested) for directional bit warnings. Fixes: 2f0f9e9ad7b3 ("objtool: Add Direction Flag validation") Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lore.kernel.org/r/dc70f2adbc72f09526f7cab5b6feb8bf7f6c5ad4.1611263461.git.jpoimboe@redhat.com
2021-01-22objtool: Don't fail on missing symbol tableJosh Poimboeuf1-2/+5
Thanks to a recent binutils change which doesn't generate unused symbols, it's now possible for thunk_64.o be completely empty without CONFIG_PREEMPTION: no text, no data, no symbols. We could edit the Makefile to only build that file when CONFIG_PREEMPTION is enabled, but that will likely create confusion if/when the thunks end up getting used by some other code again. Just ignore it and move on. Reported-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Tested-by: Nathan Chancellor <natechancellor@gmail.com> Link: https://github.com/ClangBuiltLinux/linux/issues/1254 Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
2021-01-22objtool: Don't fail the kernel build on fatal errorsJosh Poimboeuf1-9/+5
This is basically a revert of commit 644592d32837 ("objtool: Fail the kernel build on fatal errors"). That change turned out to be more trouble than it's worth. Failing the build is an extreme measure which sometimes gets too much attention and blocks CI build testing. These fatal-type warnings aren't yet as rare as we'd hope, due to the ever-increasing matrix of supported toolchains/plugins and their fast-changing nature as of late. Also, there are more people (and bots) looking for objtool warnings than ever before, so even non-fatal warnings aren't likely to be ignored for long. Suggested-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
2021-01-14objtool: Support stack layout changes in alternativesJosh Poimboeuf4-111/+159
The ORC unwinder showed a warning [1] which revealed the stack layout didn't match what was expected. The problem was that paravirt patching had replaced "CALL *pv_ops.irq.save_fl" with "PUSHF;POP". That changed the stack layout between the PUSHF and the POP, so unwinding from an interrupt which occurred between those two instructions would fail. Part of the agreed upon solution was to rework the custom paravirt patching code to use alternatives instead, since objtool already knows how to read alternatives (and converging runtime patching infrastructure is always a good thing anyway). But the main problem still remains, which is that runtime patching can change the stack layout. Making stack layout changes in alternatives was disallowed with commit 7117f16bf460 ("objtool: Fix ORC vs alternatives"), but now that paravirt is going to be doing it, it needs to be supported. One way to do so would be to modify the ORC table when the code gets patched. But ORC is simple -- a good thing! -- and it's best to leave it alone. Instead, support stack layout changes by "flattening" all possible stack states (CFI) from parallel alternative code streams into a single set of linear states. The only necessary limitation is that CFI conflicts are disallowed at all possible instruction boundaries. For example, this scenario is allowed: Alt1 Alt2 Alt3 0x00 CALL *pv_ops.save_fl CALL xen_save_fl PUSHF 0x01 POP %RAX 0x02 NOP ... 0x05 NOP ... 0x07 <insn> The unwind information for offset-0x00 is identical for all 3 alternatives. Similarly offset-0x05 and higher also are identical (and the same as 0x00). However offset-0x01 has deviating CFI, but that is only relevant for Alt3, neither of the other alternative instruction streams will ever hit that offset. This scenario is NOT allowed: Alt1 Alt2 0x00 CALL *pv_ops.save_fl PUSHF 0x01 NOP6 ... 0x07 NOP POP %RAX The problem here is that offset-0x7, which is an instruction boundary in both possible instruction patch streams, has two conflicting stack layouts. [ The above examples were stolen from Peter Zijlstra. ] The new flattened CFI array is used both for the detection of conflicts (like the second example above) and the generation of linear ORC entries. BTW, another benefit of these changes is that, thanks to some related cleanups (new fake nops and alt_group struct) objtool can finally be rid of fake jumps, which were a constant source of headaches. [1] https://lkml.kernel.org/r/20201111170536.arx2zbn4ngvjoov7@treble Cc: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
2021-01-14objtool: Add 'alt_group' structJosh Poimboeuf2-7/+35
Create a new struct associated with each group of alternatives instructions. This will help with the removal of fake jumps, and more importantly with adding support for stack layout changes in alternatives. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
2021-01-14objtool: Refactor ORC section generationJosh Poimboeuf7-159/+140
Decouple ORC entries from instructions. This simplifies the control/data flow, and is going to make it easier to support alternative instructions which change the stack layout. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
2021-01-14objtool: Rework header include pathsVasily Gorbik26-47/+48
Currently objtool headers are being included either by their base name or included via ../ from a parent directory. In case of a base name usage: #include "warn.h" #include "arch_elf.h" it does not make it apparent from which directory the file comes from. To make it slightly better, and actually to avoid name clashes some arch specific files have "arch_" suffix. And files from an arch folder have to revert to including via ../ e.g: #include "../../elf.h" With additional architectures support and the code base growth there is a need for clearer headers naming scheme for multiple reasons: 1. to make it instantly obvious where these files come from (objtool itself / objtool arch|generic folders / some other external files), 2. to avoid name clashes of objtool arch specific headers, potential obtool arch generic headers and the system header files (there is /usr/include/elf.h already), 3. to avoid ../ includes and improve code readability. 4. to give a warm fuzzy feeling to developers who are mostly kernel developers and are accustomed to linux kernel headers arranging scheme. Doesn't this make it instantly obvious where are these files come from? #include <objtool/warn.h> #include <arch/elf.h> And doesn't it look nicer to avoid ugly ../ includes? Which also guarantees this is elf.h from the objtool and not /usr/include/elf.h. #include <objtool/elf.h> This patch defines and implements new objtool headers arranging scheme. Which is: - all generic headers go to include/objtool (similar to include/linux) - all arch headers go to arch/$(SRCARCH)/include/arch (to get arch prefix). This is similar to linux arch specific "asm/*" headers but we are not abusing "asm" name and calling it what it is. This also helps to prevent name clashes (arch is not used in system headers or kernel exports). To bring objtool to this state the following things are done: 1. current top level tools/objtool/ headers are moved into include/objtool/ subdirectory, 2. arch specific headers, currently only arch/x86/include/ are moved into arch/x86/include/arch/ and were stripped of "arch_" suffix, 3. new -I$(srctree)/tools/objtool/include include path to make includes like <objtool/warn.h> possible, 4. rewriting file includes, 5. make git not to ignore include/objtool/ subdirectory. Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
2021-01-14objtool: Fix x86 orc generation on big endian cross-compilesVasily Gorbik6-6/+60
Correct objtool orc generation endianness problems to enable fully functional x86 cross-compiles on big endian hardware. Introduce bswap_if_needed() macro, which does a byte swap if target endianness doesn't match the host, i.e. cross-compilation for little endian on big endian and vice versa. The macro is used for conversion of multi-byte values which are read from / about to be written to a target native endianness ELF file. Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
2021-01-14objtool: Fix reloc generation on big endian cross-compilesMartin Schwidefsky1-15/+19
Relocations generated in elf_rebuild_rel[a]_reloc_section() are broken if objtool is built and run on a big endian system. The following errors pop up during x86 cross-compilation: x86_64-9.1.0-ld: fs/efivarfs/inode.o: bad reloc symbol index (0x2000000 >= 0x22) for offset 0 in section `.orc_unwind_ip' x86_64-9.1.0-ld: final link failed: bad value Convert those functions to use gelf_update_rel[a](), similar to what elf_write_reloc() does. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Co-developed-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
2021-01-14objtool: Make SP memory operation match PUSH/POP semanticsJulien Thierry1-0/+20
Architectures without PUSH/POP instructions will always access the stack though memory operations (SRC/DEST_INDIRECT). Make those operations have the same effect on the CFA as PUSH/POP, with no stack pointer modification. Signed-off-by: Julien Thierry <jthierry@redhat.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
2021-01-14objtool: Support addition to set CFA baseJulien Thierry1-0/+11
On arm64, the compiler can set the frame pointer either with a move operation or with and add operation like: add (SP + constant), BP For a simple move operation, the CFA base is changed from SP to BP. Handle also changing the CFA base when the frame pointer is set with an addition instruction. Signed-off-by: Julien Thierry <jthierry@redhat.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
2021-01-14objtool: Fully validate the stack frameJulien Thierry1-4/+11
A valid stack frame should contain both the return address and the previous frame pointer value. On x86, the return value is placed on the stack by the calling instructions. On other architectures, the callee needs to explicitly save the return address on the stack. Add the necessary checks to verify a function properly sets up all the elements of the stack frame. Signed-off-by: Julien Thierry <jthierry@redhat.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
2021-01-14objtool: Don't add empty symbols to the rbtreeJosh Poimboeuf1-0/+7
Building with the Clang assembler shows the following warning: arch/x86/kernel/ftrace_64.o: warning: objtool: missing symbol for insn at offset 0x16 The Clang assembler strips section symbols. That ends up giving objtool's find_func_containing() much more test coverage than normal. Turns out, find_func_containing() doesn't work so well for overlapping symbols: 2: 000000000000000e 0 NOTYPE LOCAL DEFAULT 2 fgraph_trace 3: 000000000000000f 0 NOTYPE LOCAL DEFAULT 2 trace 4: 0000000000000000 165 FUNC GLOBAL DEFAULT 2 __fentry__ 5: 000000000000000e 0 NOTYPE GLOBAL DEFAULT 2 ftrace_stub The zero-length NOTYPE symbols are inside __fentry__(), confusing the rbtree search for any __fentry__() offset coming after a NOTYPE. Try to avoid this problem by not adding zero-length symbols to the rbtree. They're rare and aren't needed in the rbtree anyway. One caveat, this actually might not end up being the right fix. Non-empty overlapping symbols, if they exist, could have the same problem. But that would need bigger changes, let's see if we can get away with the easy fix for now. Reported-by: Arnd Bergmann <arnd@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
2020-12-27Merge tag 'objtool-urgent-2020-12-27' of ↵Linus Torvalds4-26/+42
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool fix from Ingo Molnar: "Fix a segfault that occurs when built with Clang" * tag 'objtool-urgent-2020-12-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Fix seg fault with Clang non-section symbols
2020-12-16objtool: Fix seg fault with Clang non-section symbolsJosh Poimboeuf4-26/+42
The Clang assembler likes to strip section symbols, which means objtool can't reference some text code by its section. This confuses objtool greatly, causing it to seg fault. The fix is similar to what was done before, for ORC reloc generation: e81e07244325 ("objtool: Support Clang non-section symbols in ORC generation") Factor out that code into a common helper and use it for static call reloc generation as well. Reported-by: Arnd Bergmann <arnd@kernel.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Link: https://github.com/ClangBuiltLinux/linux/issues/1207 Link: https://lkml.kernel.org/r/ba6b6c0f0dd5acbba66e403955a967d9fdd1726a.1607983452.git.jpoimboe@redhat.com
2020-11-11tools: Factor HOSTCC, HOSTLD, HOSTAR definitionsJean-Philippe Brucker1-9/+0
Several Makefiles in tools/ need to define the host toolchain variables. Move their definition to tools/scripts/Makefile.include Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/bpf/20201110164310.2600671-2-jean-philippe@linaro.org
2020-10-14Merge tag 'objtool-core-2020-10-13' of ↵Linus Torvalds18-245/+398
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool updates from Ingo Molnar: "Most of the changes are cleanups and reorganization to make the objtool code more arch-agnostic. This is in preparation for non-x86 support. Other changes: - KASAN fixes - Handle unreachable trap after call to noreturn functions better - Ignore unreachable fake jumps - Misc smaller fixes & cleanups" * tag 'objtool-core-2020-10-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits) perf build: Allow nested externs to enable BUILD_BUG() usage objtool: Allow nested externs to enable BUILD_BUG() objtool: Permit __kasan_check_{read,write} under UACCESS objtool: Ignore unreachable trap after call to noreturn functions objtool: Handle calling non-function symbols in other sections objtool: Ignore unreachable fake jumps objtool: Remove useless tests before save_reg() objtool: Decode unwind hint register depending on architecture objtool: Make unwind hint definitions available to other architectures objtool: Only include valid definitions depending on source file type objtool: Rename frame.h -> objtool.h objtool: Refactor jump table code to support other architectures objtool: Make relocation in alternative handling arch dependent objtool: Abstract alternative special case handling objtool: Move macros describing structures to arch-dependent code objtool: Make sync-check consider the target architecture objtool: Group headers to check in a single list objtool: Define 'struct orc_entry' only when needed objtool: Skip ORC entry creation for non-text sections objtool: Move ORC logic out of check() ...
2020-10-12Merge tag 'core-static_call-2020-10-12' of ↵Linus Torvalds7-7/+149
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull static call support from Ingo Molnar: "This introduces static_call(), which is the idea of static_branch() applied to indirect function calls. Remove a data load (indirection) by modifying the text. They give the flexibility of function pointers, but with better performance. (This is especially important for cases where retpolines would otherwise be used, as retpolines can be pretty slow.) API overview: DECLARE_STATIC_CALL(name, func); DEFINE_STATIC_CALL(name, func); DEFINE_STATIC_CALL_NULL(name, typename); static_call(name)(args...); static_call_cond(name)(args...); static_call_update(name, func); x86 is supported via text patching, otherwise basic indirect calls are used, with function pointers. There's a second variant using inline code patching, inspired by jump-labels, implemented on x86 as well. The new APIs are utilized in the x86 perf code, a heavy user of function pointers, where static calls speed up the PMU handler by 4.2% (!). The generic implementation is not really excercised on other architectures, outside of the trivial test_static_call_init() self-test" * tag 'core-static_call-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits) static_call: Fix return type of static_call_init tracepoint: Fix out of sync data passing by static caller tracepoint: Fix overly long tracepoint names x86/perf, static_call: Optimize x86_pmu methods tracepoint: Optimize using static_call() static_call: Allow early init static_call: Add some validation static_call: Handle tail-calls static_call: Add static_call_cond() x86/alternatives: Teach text_poke_bp() to emulate RET static_call: Add simple self-test for static calls x86/static_call: Add inline static call implementation for x86-64 x86/static_call: Add out-of-line static call implementation static_call: Avoid kprobes on inline static_call()s static_call: Add inline static call infrastructure static_call: Add basic static call infrastructure compiler.h: Make __ADDRESSABLE() symbol truly unique jump_label,module: Fix module lifetime for __jump_label_mod_text_reserved() module: Properly propagate MODULE_STATE_COMING failure module: Fix up module_notifier return values ...
2020-10-12Merge tag 'locking-core-2020-10-12' of ↵Linus Torvalds1-0/+55
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking updates from Ingo Molnar: "These are the locking updates for v5.10: - Add deadlock detection for recursive read-locks. The rationale is outlined in commit 224ec489d3cd ("lockdep/ Documention: Recursive read lock detection reasoning") The main deadlock pattern we want to detect is: TASK A: TASK B: read_lock(X); write_lock(X); read_lock_2(X); - Add "latch sequence counters" (seqcount_latch_t): A sequence counter variant where the counter even/odd value is used to switch between two copies of protected data. This allows the read path, typically NMIs, to safely interrupt the write side critical section. We utilize this new variant for sched-clock, and to make x86 TSC handling safer. - Other seqlock cleanups, fixes and enhancements - KCSAN updates - LKMM updates - Misc updates, cleanups and fixes" * tag 'locking-core-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (67 commits) lockdep: Revert "lockdep: Use raw_cpu_*() for per-cpu variables" lockdep: Fix lockdep recursion lockdep: Fix usage_traceoverflow locking/atomics: Check atomic-arch-fallback.h too locking/seqlock: Tweak DEFINE_SEQLOCK() kernel doc lockdep: Optimize the memory usage of circular queue seqlock: Unbreak lockdep seqlock: PREEMPT_RT: Do not starve seqlock_t writers seqlock: seqcount_LOCKNAME_t: Introduce PREEMPT_RT support seqlock: seqcount_t: Implement all read APIs as statement expressions seqlock: Use unique prefix for seqcount_t property accessors seqlock: seqcount_LOCKNAME_t: Standardize naming convention seqlock: seqcount latch APIs: Only allow seqcount_latch_t rbtree_latch: Use seqcount_latch_t x86/tsc: Use seqcount_latch_t timekeeping: Use seqcount_latch_t time/sched_clock: Use seqcount_latch_t seqlock: Introduce seqcount_latch_t mm/swap: Do not abuse the seqcount_t latching API time/sched_clock: Use raw_read_seqcount_latch() during suspend ...
2020-10-12Merge tag 'ras_updates_for_v5.10' of ↵Linus Torvalds1-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RAS updates from Borislav Petkov: - Extend the recovery from MCE in kernel space also to processes which encounter an MCE in kernel space but while copying from user memory by sending them a SIGBUS on return to user space and umapping the faulty memory, by Tony Luck and Youquan Song. - memcpy_mcsafe() rework by splitting the functionality into copy_mc_to_user() and copy_mc_to_kernel(). This, as a result, enables support for new hardware which can recover from a machine check encountered during a fast string copy and makes that the default and lets the older hardware which does not support that advance recovery, opt in to use the old, fragile, slow variant, by Dan Williams. - New AMD hw enablement, by Yazen Ghannam and Akshay Gupta. - Do not use MSR-tracing accessors in #MC context and flag any fault while accessing MCA architectural MSRs as an architectural violation with the hope that such hw/fw misdesigns are caught early during the hw eval phase and they don't make it into production. - Misc fixes, improvements and cleanups, as always. * tag 'ras_updates_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mce: Allow for copy_mc_fragile symbol checksum to be generated x86/mce: Decode a kernel instruction to determine if it is copying from user x86/mce: Recover from poison found while copying from user space x86/mce: Avoid tail copy when machine check terminated a copy from user x86/mce: Add _ASM_EXTABLE_CPY for copy user access x86/mce: Provide method to find out the type of an exception handler x86/mce: Pass pointer to saved pt_regs to severity calculation routines x86/copy_mc: Introduce copy_mc_enhanced_fast_string() x86, powerpc: Rename memcpy_mcsafe() to copy_mc_to_{user, kernel}() x86/mce: Drop AMD-specific "DEFERRED" case from Intel severity rule list x86/mce: Add Skylake quirk for patrol scrub reported errors RAS/CEC: Convert to DEFINE_SHOW_ATTRIBUTE() x86/mce: Annotate mce_rd/wrmsrl() with noinstr x86/mce/dev-mcelog: Do not update kflags on AMD systems x86/mce: Stop mce_reign() from re-computing severity for every CPU x86/mce: Make mce_rdmsrl() panic on an inaccessible MSR x86/mce: Increase maximum number of banks to 64 x86/mce: Delay clearing IA32_MCG_STATUS to the end of do_machine_check() x86/MCE/AMD, EDAC/mce_amd: Remove struct smca_hwid.xec_bitmap RAS/CEC: Fix cec_init() prototype
2020-10-09Merge branch 'kcsan' of ↵Ingo Molnar1-0/+55
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into locking/core Pull KCSAN updates for v5.10 from Paul E. McKenney: - Improve kernel messages. - Be more permissive with bitops races under KCSAN_ASSUME_PLAIN_WRITES_ATOMIC=y. - Optimize debugfs stat counters. - Introduce the instrument_*read_write() annotations, to provide a finer description of certain ops - using KCSAN's compound instrumentation. Use them for atomic RNW and bitops, where appropriate. Doing this might find new races. (Depends on the compiler having tsan-compound-read-before-write=1 support.) - Support atomic built-ins, which will help certain architectures, such as s390. - Misc enhancements and smaller fixes. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-10-06objtool: Allow nested externs to enable BUILD_BUG()Vasily Gorbik1-1/+1
Currently BUILD_BUG() macro is expanded to smth like the following: do { extern void __compiletime_assert_0(void) __attribute__((error("BUILD_BUG failed"))); if (!(!(1))) __compiletime_assert_0(); } while (0); If used in a function body this obviously would produce build errors with -Wnested-externs and -Werror. Build objtool with -Wno-nested-externs to enable BUILD_BUG() usage. Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
2020-10-06x86/copy_mc: Introduce copy_mc_enhanced_fast_string()Dan Williams1-0/+1
The motivations to go rework memcpy_mcsafe() are that the benefit of doing slow and careful copies is obviated on newer CPUs, and that the current opt-in list of CPUs to instrument recovery is broken relative to those CPUs. There is no need to keep an opt-in list up to date on an ongoing basis if pmem/dax operations are instrumented for recovery by default. With recovery enabled by default the old "mcsafe_key" opt-in to careful copying can be made a "fragile" opt-out. Where the "fragile" list takes steps to not consume poison across cachelines. The discussion with Linus made clear that the current "_mcsafe" suffix was imprecise to a fault. The operations that are needed by pmem/dax are to copy from a source address that might throw #MC to a destination that may write-fault, if it is a user page. So copy_to_user_mcsafe() becomes copy_mc_to_user() to indicate the separate precautions taken on source and destination. copy_mc_to_kernel() is introduced as a non-SMAP version that does not expect write-faults on the destination, but is still prepared to abort with an error code upon taking #MC. The original copy_mc_fragile() implementation had negative performance implications since it did not use the fast-string instruction sequence to perform copies. For this reason copy_mc_to_kernel() fell back to plain memcpy() to preserve performance on platforms that did not indicate the capability to recover from machine check exceptions. However, that capability detection was not architectural and now that some platforms can recover from fast-string consumption of memory errors the memcpy() fallback now causes these more capable platforms to fail. Introduce copy_mc_enhanced_fast_string() as the fast default implementation of copy_mc_to_kernel() and finalize the transition of copy_mc_fragile() to be a platform quirk to indicate 'copy-carefully'. With this in place, copy_mc_to_kernel() is fast and recovery-ready by default regardless of hardware capability. Thanks to Vivek for identifying that copy_user_generic() is not suitable as the copy_mc_to_user() backend since the #MC handler explicitly checks ex_has_fault_handler(). Thanks to the 0day robot for catching a performance bug in the x86/copy_mc_to_user implementation. [ bp: Add the "why" for this change from the 0/2th message, massage. ] Fixes: 92b0729c34ca ("x86/mm, x86/mce: Add memcpy_mcsafe()") Reported-by: Erwin Tsaur <erwin.tsaur@intel.com> Reported-by: 0day robot <lkp@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Tony Luck <tony.luck@intel.com> Tested-by: Erwin Tsaur <erwin.tsaur@intel.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/160195562556.2163339.18063423034951948973.stgit@dwillia2-desk3.amr.corp.intel.com
2020-10-06x86, powerpc: Rename memcpy_mcsafe() to copy_mc_to_{user, kernel}()Dan Williams1-2/+2
In reaction to a proposal to introduce a memcpy_mcsafe_fast() implementation Linus points out that memcpy_mcsafe() is poorly named relative to communicating the scope of the interface. Specifically what addresses are valid to pass as source, destination, and what faults / exceptions are handled. Of particular concern is that even though x86 might be able to handle the semantics of copy_mc_to_user() with its common copy_user_generic() implementation other archs likely need / want an explicit path for this case: On Fri, May 1, 2020 at 11:28 AM Linus Torvalds <torvalds@linux-foundation.org> wrote: > > On Thu, Apr 30, 2020 at 6:21 PM Dan Williams <dan.j.williams@intel.com> wrote: > > > > However now I see that copy_user_generic() works for the wrong reason. > > It works because the exception on the source address due to poison > > looks no different than a write fault on the user address to the > > caller, it's still just a short copy. So it makes copy_to_user() work > > for the wrong reason relative to the name. > > Right. > > And it won't work that way on other architectures. On x86, we have a > generic function that can take faults on either side, and we use it > for both cases (and for the "in_user" case too), but that's an > artifact of the architecture oddity. > > In fact, it's probably wrong even on x86 - because it can hide bugs - > but writing those things is painful enough that everybody prefers > having just one function. Replace a single top-level memcpy_mcsafe() with either copy_mc_to_user(), or copy_mc_to_kernel(). Introduce an x86 copy_mc_fragile() name as the rename for the low-level x86 implementation formerly named memcpy_mcsafe(). It is used as the slow / careful backend that is supplanted by a fast copy_mc_generic() in a follow-on patch. One side-effect of this reorganization is that separating copy_mc_64.S to its own file means that perf no longer needs to track dependencies for its memcpy_64.S benchmarks. [ bp: Massage a bit. ] Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Tony Luck <tony.luck@intel.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Cc: <stable@vger.kernel.org> Link: http://lore.kernel.org/r/CAHk-=wjSqtXAqfUJxFtWNwmguFASTgB0dz1dT3V-78Quiezqbg@mail.gmail.com Link: https://lkml.kernel.org/r/160195561680.2163339.11574962055305783722.stgit@dwillia2-desk3.amr.corp.intel.com
2020-10-02objtool: Permit __kasan_check_{read,write} under UACCESSJann Horn1-0/+2
Building linux-next with JUMP_LABEL=n and KASAN=y, I got this objtool warning: arch/x86/lib/copy_mc.o: warning: objtool: copy_mc_to_user()+0x22: call to __kasan_check_read() with UACCESS enabled What happens here is that copy_mc_to_user() branches on a static key in a UACCESS region:         __uaccess_begin();         if (static_branch_unlikely(&copy_mc_fragile_key))                 ret = copy_mc_fragile(to, from, len);         ret = copy_mc_generic(to, from, len);         __uaccess_end(); and the !CONFIG_JUMP_LABEL version of static_branch_unlikely() uses static_key_enabled(), which uses static_key_count(), which uses atomic_read(), which calls instrument_atomic_read(), which uses kasan_check_read(), which is __kasan_check_read(). Let's permit these KASAN helpers in UACCESS regions - static keys should probably work under UACCESS, I think. PeterZ adds: It's not a matter of permitting, it's a matter of being safe and correct. In this case it is, because it's a thin wrapper around check_memory_region() which was already marked safe. check_memory_region() is correct because the only thing it ends up calling is kasa_report() and that is also marked safe because that is annotated with user_access_save/restore() before it does anything else. On top of that, all of KASAN is noinstr, so nothing in here will end up in tracing and/or call schedule() before the user_access_save(). Signed-off-by: Jann Horn <jannh@google.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
2020-09-21objtool: Ignore unreachable trap after call to noreturn functionsIlie Halip1-3/+7
With CONFIG_UBSAN_TRAP enabled, the compiler may insert a trap instruction after a call to a noreturn function. In this case, objtool warns that the UD2 instruction is unreachable. This is a behavior seen with Clang, from the oldest version capable of building the mainline x64_64 kernel (9.0), to the latest experimental version (12.0). Objtool silences similar warnings (trap after dead end instructions), so so expand that check to include dead end functions. Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Rong Chen <rong.a.chen@intel.com> Cc: Marco Elver <elver@google.com> Cc: Philip Li <philip.li@intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: kasan-dev@googlegroups.com Cc: x86@kernel.org Cc: clang-built-linux@googlegroups.com BugLink: https://github.com/ClangBuiltLinux/linux/issues/1148 Link: https://lore.kernel.org/lkml/CAKwvOdmptEpi8fiOyWUo=AiZJiX+Z+VHJOM2buLPrWsMTwLnyw@mail.gmail.com Suggested-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Ilie Halip <ilie.halip@gmail.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
2020-09-21objtool: Handle calling non-function symbols in other sectionsJulien Thierry1-5/+14
Relocation for a call destination could point to a symbol that has type STT_NOTYPE. Lookup such a symbol when no function is available. Signed-off-by: Julien Thierry <jthierry@redhat.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
2020-09-18objtool: Fix noreturn detection for ignored functionsJosh Poimboeuf1-1/+1
When a function is annotated with STACK_FRAME_NON_STANDARD, objtool doesn't validate its code paths. It also skips sibling call detection within the function. But sibling call detection is actually needed for the case where the ignored function doesn't have any return instructions. Otherwise objtool naively marks the function as implicit static noreturn, which affects the reachability of its callers, resulting in "unreachable instruction" warnings. Fix it by just enabling sibling call detection for ignored functions. The 'insn->ignore' check in add_jump_destinations() is no longer needed after e6da9567959e ("objtool: Don't use ignore flag for fake jumps"). Fixes the following warning: arch/x86/kvm/vmx/vmx.o: warning: objtool: vmx_handle_exit_irqoff()+0x142: unreachable instruction which triggers on an allmodconfig with CONFIG_GCOV_KERNEL unset. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lkml.kernel.org/r/5b1e2536cdbaa5246b60d7791b76130a74082c62.1599751464.git.jpoimboe@redhat.com