| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Now that we have caches in place to speed up the process of finding
inlined frames and srcline information repeatedly, we can enable this
useful option by default.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20171019113836.5548-6-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Andi reported a performance drop in single threaded perf tools such as
'perf script' due to the growing number of locks being put in place to
allow for multithreaded tools, so wrap the POSIX threads rwlock routines
with the names used for such kinds of locks in the Linux kernel and then
allow for tools to ask for those locks to be used or not.
I.e. a tool may have a multithreaded phase and then switch to single
threaded, like the upcoming patches for the synthesizing of
PERF_RECORD_{FORK,MMAP,etc} for pre-existing processes to then switch to
single threaded mode in 'perf top'.
The init routines will not be conditional, this way starting as single
threaded to then move to multi threaded mode should be possible.
Reported-by: Andi Kleen <ak@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170404161739.GH12903@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
During work on perf report for s390 I ran into the following issue:
0 0x318 [0x78]: PERF_RECORD_MMAP -1/0:
[0x3ff804d6990(0xfffffc007fb2966f) @ 0]:
x /lib/modules/4.12.0perf1+/kernel/drivers/s390/net/qeth_l2.ko
This is a PERF_RECORD_MMAP entry of the perf.data file with an invalid
module size for qeth_l2.ko (the s390 ethernet device driver).
Even a mainframe does not have 0xfffffc007fb2966f bytes of main memory.
It turned out that this wrong size is created by the perf record
command. What happens is this function call sequence from
__cmd_record():
perf_session__new():
perf_session__create_kernel_maps():
machine__create_kernel_maps():
machine__create_modules(): Creates map for all loaded kernel modules.
modules__parse(): Reads /proc/modules and extracts module name and
load address (1st and last column)
machine__create_module(): Called for every module found in /proc/modules.
Creates a new map for every module found and enters
module name and start address into the map. Since the
module end address is unknown it is set to zero.
This ends up with a kernel module map list sorted by module start
addresses. All module end addresses are zero.
Last machine__create_kernel_maps() calls function map_groups__fixup_end().
This function iterates through the maps and assigns each map entry's
end address the successor map entry start address. The last entry of the
map group has no successor, so ~0 is used as end to consume the remaining
memory.
Later __cmd_record calls function record__synthesize() which in turn calls
perf_event__synthesize_kernel_mmap() and perf_event__synthesize_modules()
to create PERF_REPORT_MMAP entries into the perf.data file.
On s390 this results in the last module qeth_l2.ko
(which has highest start address, see module table:
[root@s8360047 perf]# cat /proc/modules
qeth_l2 86016 1 - Live 0x000003ff804d6000
qeth 266240 1 qeth_l2, Live 0x000003ff80296000
ccwgroup 24576 1 qeth, Live 0x000003ff80218000
vmur 36864 0 - Live 0x000003ff80182000
qdio 143360 2 qeth_l2,qeth, Live 0x000003ff80002000
[root@s8360047 perf]# )
to be the last entry and its map has an end address of ~0.
When the PERF_RECORD_MMAP entry is created for kernel module qeth_l2.ko
its start address and length is written. The length is calculated in line:
event->mmap.len = pos->end - pos->start;
and results in 0xffffffffffffffff - 0x3ff804d6990(*) = 0xfffffc007fb2966f
(*) On s390 the module start address is actually determined by a __weak function
named arch__fix_module_text_start() in machine__create_module().
I think this improvable. We can use the module size (2nd column of /proc/modules)
to get each loaded kernel module size and calculate its end address.
Only for map entries which do not have a valid end address (end is still zero)
we can use the heuristic we have now, that is use successor start address or ~0.
Signed-off-by: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Cc: Zvonko Kosic <zvonko.kosic@de.ibm.com>
LPU-Reference: 20170803134902.47207-2-tmricht@linux.vnet.ibm.com
Link: http://lkml.kernel.org/n/tip-nmoqij5b5vxx7rq2ckwu8iaj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
If a stripped binary is placed in the cache, the user is in a situation
where there's a cached elf file present, but it doesn't have any symtab
to use for name resolution. Grab the debuginfo for binaries that don't
end in .ko. This yields a better chance of resolving symbols from older
traces.
Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1499305693-1599-7-git-send-email-kjlx@templeofstupid.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Teach buildid-cache how to add, remove, and update binary objects from
other mount namespaces. Allow probe events tracing binaries in
different namespaces to add their objects to the probe and build-id
caches too. As a handy side effect, this also lets us access SDT probes
in binaries from alternate mount namespaces.
Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Tested-by: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1499305693-1599-5-git-send-email-kjlx@templeofstupid.com
[ Add util/namespaces.c to tools/perf/util/python-ext-sources, to fix the python binding 'perf test' ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
If a process is in a mountns and has symbols in /tmp/perf-<pid>.map,
look first in the namespace using the tgid for the pidns that the
process might be in. If the map isn't found there, try looking in the
mountns where perf is running, and use the tgid that's appropriate for
perf's pid namespace. If all else fails, use the original pid.
This allows us to locate a symbol map file in the mount namespace, if it
was generated there. However, we also try the tool's /tmp in case it's
there instead.
Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Tested-by: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1499305693-1599-3-git-send-email-kjlx@templeofstupid.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Teach perf how to resolve symbols from binaries that are in a different
mount namespace from the tool. This allows perf to generate meaningful
stack traces even if the binary resides in a different mount namespace
from the tool.
Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Tested-by: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1499305693-1599-2-git-send-email-kjlx@templeofstupid.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The commit e7ee40475760 ("perf symbols: Fix symbols searching for module
in buildid-cache") added the function to check kernel modules reside in
the build-id cache. This was because there's no way to identify a DSO
which is actually a kernel module. So it searched linkname of the file
and find ".ko" suffix.
But this does not work for compressed kernel modules and now such DSOs
hCcave correct symtab_type now. So no need to check it anymore. This
patch essentially reverts the commit.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170608073109.30699-10-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Symbol versioning, as in glibc, results in symbols being defined as:
<real symbol>@[@]<version>
(Note that "@@" identifies a default symbol, if the symbol name is
repeated.)
perf is currently unable to deal with this, and is unable to create user
probes at such symbols:
--
$ nm /lib/powerpc64le-linux-gnu/libpthread.so.0 | grep pthread_create
0000000000008d30 t __pthread_create_2_1
0000000000008d30 T pthread_create@@GLIBC_2.17
$ /usr/bin/sudo perf probe -v -x /lib/powerpc64le-linux-gnu/libpthread.so.0 pthread_create
probe-definition(0): pthread_create
symbol:pthread_create file:(null) line:0 offset:0 return:0 lazy:(null)
0 arguments
Open Debuginfo file: /usr/lib/debug/lib/powerpc64le-linux-gnu/libpthread-2.19.so
Try to find probe point from debuginfo.
Probe point 'pthread_create' not found.
Error: Failed to add events. Reason: No such file or directory (Code: -2)
--
One is not able to specify the fully versioned symbol, either, due to
syntactic conflicts with other uses of "@" by perf:
--
$ /usr/bin/sudo perf probe -v -x /lib/powerpc64le-linux-gnu/libpthread.so.0 pthread_create@@GLIBC_2.17
probe-definition(0): pthread_create@@GLIBC_2.17
Semantic error :SRC@SRC is not allowed.
0 arguments
Error: Command Parse Error. Reason: Invalid argument (Code: -22)
--
This patch ignores versioning for default symbols, thus allowing probes to be
created for these symbols:
--
$ /usr/bin/sudo ./perf probe -x /lib/powerpc64le-linux-gnu/libpthread.so.0 pthread_create
Added new event:
probe_libpthread:pthread_create (on pthread_create in /lib/powerpc64le-linux-gnu/libpthread-2.19.so)
You can now use it in all perf tools, such as:
perf record -e probe_libpthread:pthread_create -aR sleep 1
$ /usr/bin/sudo ./perf record -e probe_libpthread:pthread_create -aR ./test 2
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.052 MB perf.data (2 samples) ]
$ /usr/bin/sudo ./perf script
test 2915 [000] 19124.260729: probe_libpthread:pthread_create: (3fff99248d38)
test 2916 [000] 19124.260962: probe_libpthread:pthread_create: (3fff99248d38)
$ /usr/bin/sudo ./perf probe --del=probe_libpthread:pthread_create
Removed event: probe_libpthread:pthread_create
--
Committer note:
Change the variable storing the result of strlen() to 'int', to fix the build
on debian:experimental-x-mipsel, fedora:24-x-ARC-uClibc, ubuntu:16.04-x-arm,
etc:
util/symbol.c: In function 'symbol__match_symbol_name':
util/symbol.c:422:11: error: comparison between signed and unsigned integer expressions [-Werror=sign-compare]
if (len < versioning - name)
^
Signed-off-by: Paul A. Clarke <pc@us.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/c2b18d9c-17f8-9285-4868-f58b6359ccac@us.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
That is the case of _text on s390, and we have some functions that return an
address, using address zero to report problems, oops.
This would lead the symbol loading routines to not use "_text" as the reference
relocation symbol, or the first symbol for the kernel, but use instead
"_stext", that is at the same address on x86_64 and others, but not on s390:
[acme@localhost perf-4.11.0-rc6]$ head -15 /proc/kallsyms
0000000000000000 T _text
0000000000000418 t iplstart
0000000000000800 T start
000000000000080a t .base
000000000000082e t .sk8x8
0000000000000834 t .gotr
0000000000000842 t .cmd
0000000000000846 t .parm
000000000000084a t .lowcase
0000000000010000 T startup
0000000000010010 T startup_kdump
0000000000010214 t startup_kdump_relocated
0000000000011000 T startup_continue
00000000000112a0 T _ehead
0000000000100000 T _stext
[acme@localhost perf-4.11.0-rc6]$
Which in turn would make 'perf test vmlinux' to fail because it wouldn't find
the symbols before "_stext" in kallsyms.
Fix it by using the return value only for errors and storing the
address, when the symbol is successfully found, in a provided pointer
arg.
Before this patch:
After:
[acme@localhost perf-4.11.0-rc6]$ tools/perf/perf test -v 1
1: vmlinux symtab matches kallsyms :
--- start ---
test child forked, pid 40693
Looking at the vmlinux_path (8 entries long)
Using /usr/lib/debug/lib/modules/3.10.0-654.el7.s390x/vmlinux for symbols
ERR : 0: _text not on kallsyms
ERR : 0x418: iplstart not on kallsyms
ERR : 0x800: start not on kallsyms
ERR : 0x80a: .base not on kallsyms
ERR : 0x82e: .sk8x8 not on kallsyms
ERR : 0x834: .gotr not on kallsyms
ERR : 0x842: .cmd not on kallsyms
ERR : 0x846: .parm not on kallsyms
ERR : 0x84a: .lowcase not on kallsyms
ERR : 0x10000: startup not on kallsyms
ERR : 0x10010: startup_kdump not on kallsyms
ERR : 0x10214: startup_kdump_relocated not on kallsyms
ERR : 0x11000: startup_continue not on kallsyms
ERR : 0x112a0: _ehead not on kallsyms
<SNIP warnings>
test child finished with -1
---- end ----
vmlinux symtab matches kallsyms: FAILED!
[acme@localhost perf-4.11.0-rc6]$
After:
[acme@localhost perf-4.11.0-rc6]$ tools/perf/perf test -v 1
1: vmlinux symtab matches kallsyms :
--- start ---
test child forked, pid 47160
<SNIP warnings>
test child finished with 0
---- end ----
vmlinux symtab matches kallsyms: Ok
[acme@localhost perf-4.11.0-rc6]$
Reported-by: Michael Petlan <mpetlan@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-9x9bwgd3btwdk1u51xie93fz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Disentangling util.h header mess a bit more.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-aj6je8ly377i4upedmjzdsq6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
More stuff that came from git, out of the hodge-podge that is util.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-e3lana4gctz3ub4hn4y29hkw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pave the way for further cleanups where linux/kernel.h may stop being
included in some header.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-qqxan6tfsl6qx3l0v3nwgjvk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The current symbols__fixup_end() heuristic for the last entry in the rb
tree is suboptimal as it leads to not being able to recognize the symbol
in the call graph in a couple of corner cases, for example:
i) If the symbol has a start address (f.e. exposed via kallsyms)
that is at a page boundary, then the roundup(curr->start, 4096)
for the last entry will result in curr->start == curr->end with
a symbol length of zero.
ii) If the symbol has a start address that is shortly before a page
boundary, then also here, curr->end - curr->start will just be
very few bytes, where it's unrealistic that we could perform a
match against.
Instead, change the heuristic to roundup(curr->start, 4096) + 4096, so
that we can catch such corner cases and have a better chance to find
that specific symbol. It's still just best effort as the real end of the
symbol is unknown to us (and could even be at a larger offset than the
current range), but better than the current situation.
Alexei reported that he recently run into case i) with a JITed eBPF
program (these are all page aligned) as the last symbol which wasn't
properly shown in the call graph (while other eBPF program symbols in
the rb tree were displayed correctly). Since this is a generic issue,
lets try to improve the heuristic a bit.
Reported-and-Tested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Fixes: 2e538c4a1847 ("perf tools: Improve kernel/modules symbol lookup")
Link: http://lkml.kernel.org/r/bb5c80d27743be6f12afc68405f1956a330e1bc9.1489614365.git.daniel@iogearbox.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
After commit 5baecbcd9c9a ("perf symbols: we can now read separate
debug-info files based on a build ID") and when --symfs option is used
perf failed to pick up symbols for file with the same name between host
and sysroot specified by --symfs option. One can see message like this:
bin/bash with build id 26f0062cb6950d4d1ab0fd9c43eae8b10ca42062 not found, continuing without symbols
It happens because code added by 5baecbcd9c9a opens files directly by
dso->long_name without symbol_conf.symfs consideration, which as result
picks one from the host. It reads its build ID and later even code finds
another proper file in directory pointed by --symfs perf ignores it
because build id mismatches.
Fix is to use __symbol__join_symfs to adjust file name according to
--symfs setting. If no --symfs passed the operation would noop and picks
the same host file as before.
Also note in latter tree after 5baecbcd9c9a commit additional check for
'!dso->has_build_id' was added, so to observe error condition 'perf
record' should run with --no-buildid, so perf.data itself would not have
build id for target binary in buildid perf section and 'perf report'
will pass '!dso->has_build_id' condition. Or target binary should not
have build id, but the same binary on host has build id, again
'!dso->has_build_id' will pass in this case and incorrect build id could
be read if --symfs is used.
Signed-off-by: Victor Kamensky <kamensky@cisco.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chris Phlipot <cphlipot0@gmail.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: He Kuang <hekuang@huawei.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: xe-linux-external@cisco.com
Fixes: 5baecbcd9c9a ("perf symbols: we can now read separate debug-info files based on a build ID")
Link: http://lkml.kernel.org/r/1486424908-17094-1-git-send-email-kamensky@cisco.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Fixes a perf diff regression issue which was introduced by commit
5baecbcd9c9a ("perf symbols: we can now read separate debug-info files
based on a build ID")
The binary name could be same when perf diff different binaries. Build
id is used to distinguish between them.
However, the previous patch assumes the same binary name has same build
id. So it overwrites the build id according to the binary name,
regardless of whether the build id is set or not.
Check the has_build_id in dso__load. If the build id is already set, use
it.
Before the fix:
$ perf diff 1.perf.data 2.perf.data
# Event 'cycles'
#
# Baseline Delta Shared Object Symbol
# ........ ....... ................ .............................
#
99.83% -99.80% tchain_edit [.] f2
0.12% +99.81% tchain_edit [.] f3
0.02% -0.01% [ixgbe] [k] ixgbe_read_reg
After the fix:
$ perf diff 1.perf.data 2.perf.data
# Event 'cycles'
#
# Baseline Delta Shared Object Symbol
# ........ ....... ................ .............................
#
99.83% +0.10% tchain_edit [.] f3
0.12% -0.08% tchain_edit [.] f2
Signed-off-by: Kan Liang <kan.liang@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
CC: Dima Kogan <dima@secretsauce.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: 5baecbcd9c9a ("perf symbols: we can now read separate debug-info files based on a build ID")
Link: http://lkml.kernel.org/r/1481642984-13593-1-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Allow user to specify list of symbols which cause the dump of callchains
to stop at that symbol.
Committer notes:
Testing it:
# perf record -ag usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.177 MB perf.data (33 samples) ]
#
# # Without it:
#
# perf script
swapper 0 [000] 9693.370039: 1 cycles:ppp:
2072ad x86_pmu_enable (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
3a29d7 perf_pmu_enable.part.90 (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
3a713a ctx_resched (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
3a76c1 __perf_event_enable (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
3a0390 event_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
3a1cff remote_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
326978 flush_smp_call_function_queue (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
327413 generic_smp_call_function_single_interrupt (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
249b37 smp_call_function_single_interrupt (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
a04b2c call_function_single_interrupt (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
889427 cpuidle_enter (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
2e534a call_cpuidle (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
2e5730 cpu_startup_entry (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
9f5167 rest_init (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
137ffeb start_kernel ([kernel.vmlinux].init.text)
137f2ca x86_64_start_reservations ([kernel.vmlinux].init.text)
137f419 x86_64_start_kernel ([kernel.vmlinux].init.text)
swapper 0 [000] 9693.370044: 1 cycles:ppp:
20ca1b intel_pmu_handle_irq (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
205b0c perf_event_nmi_handler (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
22a14a nmi_handle (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
22a6b3 default_do_nmi (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
22a83c do_nmi (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
a03fb1 end_repeat_nmi (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
3a29d7 perf_pmu_enable.part.90 (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
3a713a ctx_resched (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
3a76c1 __perf_event_enable (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
3a0390 event_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
3a1cff remote_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
326978 flush_smp_call_function_queue (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
327413 generic_smp_call_function_single_interrupt (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
249b37 smp_call_function_single_interrupt (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
a04b2c call_function_single_interrupt (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
889427 cpuidle_enter (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
2e534a call_cpuidle (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
2e5730 cpu_startup_entry (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
9f5167 rest_init (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
137ffeb start_kernel ([kernel.vmlinux].init.text)
137f2ca x86_64_start_reservations ([kernel.vmlinux].init.text)
#
# # Using it to see just what are the calls from the 'remote_function' function:
#
# perf script --stop-bt remote_function
swapper 0 [000] 9693.370039: 1 cycles:ppp:
2072ad x86_pmu_enable (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
3a29d7 perf_pmu_enable.part.90 (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
3a713a ctx_resched (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
3a76c1 __perf_event_enable (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
3a0390 event_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
3a1cff remote_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
swapper 0 [000] 9693.370044: 1 cycles:ppp:
20ca1b intel_pmu_handle_irq (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
205b0c perf_event_nmi_handler (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
22a14a nmi_handle (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
22a6b3 default_do_nmi (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
22a83c do_nmi (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
a03fb1 end_repeat_nmi (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
3a29d7 perf_pmu_enable.part.90 (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
3a713a ctx_resched (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
3a76c1 __perf_event_enable (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
3a0390 event_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
3a1cff remote_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux)
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1480104021-36275-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Before this patch perf panics if kptr_restrict is set to 1 and perf is
owned by root with suid set:
$ whoami
wangnan
$ ls -l ./perf
-rwsr-xr-x 1 root root 19781908 Sep 21 19:29 /home/wangnan/perf
$ cat /proc/sys/kernel/kptr_restrict
1
$ cat /proc/sys/kernel/perf_event_paranoid
-1
$ ./perf record -a
Segmentation fault (core dumped)
$
The reason is that perf assumes it is allowed to read kptr from
/proc/kallsyms when euid is root, but in fact the kernel doesn't allow
reading kptr when euid and uid do not match with each other:
$ cp /bin/cat .
$ sudo chown root:root ./cat
$ sudo chmod u+s ./cat
$ cat /proc/kallsyms | grep do_fork
0000000000000000 T _do_fork <--- kptr is hidden even euid is root
$ sudo cat /proc/kallsyms | grep do_fork
ffffffff81080230 T _do_fork
See lib/vsprintf.c for kernel side code.
This patch fixes this problem by checking both uid and euid.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/20161115040617.69788-3-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add a function to find the last symbol in a DSO. This will be used when
parsing address filters to calculate a region that includes the entire
DSO.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: http://lkml.kernel.org/r/1474641528-18776-7-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
We're not using it anymore, few users were, but we really could do
without it, simplify lots of functions by removing it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-1zng8wdznn00iiz08bb7q3vn@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This was being done just in 'perf top', but grouping idle symbols should
be useful in other places as well, so remove one more symbol_filter_t
user by moving this to the symbol library.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-5r7xitjkzjr9jak1zy3d8u5l@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When we call symbol__fixup_duplicate() we use algorithms to pick the
"best" symbols for cases where there are various functions/aliases to an
address, and those check zero size symbols, which, before calling
symbol__fixup_end() are _all_ symbols in a just parsed kallsyms file.
So first fixup the end, then fixup the duplicates.
Found while trying to figure out why 'perf test vmlinux' failed, see the
output of 'perf test -v vmlinux' to see cases where the symbols picked
as best for vmlinux don't match the ones picked for kallsyms.
Cc: Anton Blanchard <anton@samba.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 694bf407b061 ("perf symbols: Add some heuristics for choosing the best duplicate symbol")
Link: http://lkml.kernel.org/n/tip-rxqvdgr0mqjdxee0kf8i2ufn@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
We can allow aliases to be kept, but we were checking this just when
loading vmlinux files, be consistent, do it for any symbol table loading
code that calls symbol__fixup_duplicate() by making this function check
.allow_aliases instead.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 680d926a8cb0 ("perf symbols: Allow symbol alias when loading map for symbol name")
Link: http://lkml.kernel.org/n/tip-z0avp0s6cfjckc4xj3pdfjdz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
We need to initializa some fields (right now just a mutex) when we
allocate the per symbol annotation struct, so do it at the symbol
constructor instead of (ab)using the filter mechanism for that.
This way we remove one of the few cases we have for that symbol filter,
which will eventually led to removing it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-cvz34avlz1lez888lob95390@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Marc reported use of uninitialized memory:
> In commit "403567217d3f perf symbols: Do not read symbols/data from
> device files" a check to uninitialzied memory was added. This leads to
> the following valgrind output:
>
> ==24515== Syscall param stat(file_name) points to uninitialised byte(s)
> ==24515== at 0x75B26D5: _xstat (in /lib/x86_64-linux-gnu/libc-2.22.so)
> ==24515== by 0x4E548D: stat (stat.h:454)
> ==24515== by 0x4E548D: is_regular_file (util.c:687)
> ==24515== by 0x4A5BEE: dso__load (symbol.c:1435)
> ==24515== by 0x4BB1AE: map__load (map.c:289)
> ==24515== by 0x4BB1AE: map__find_symbol (map.c:333)
> ==24515== by 0x4835B3: thread__find_addr_location (event.c:1300)
> ==24515== by 0x4B5342: add_callchain_ip (machine.c:1652)
> ==24515== by 0x4B5342: thread__resolve_callchain_sample (machine.c:1906)
> ==24515== by 0x4B9E7D: thread__resolve_callchain (machine.c:1958)
> ==24515== by 0x441B3E: process_event (builtin-script.c:795)
> ==24515== by 0x441B3E: process_sample_event (builtin-script.c:920)
> ==24515== by 0x4BEE29: perf_evlist__deliver_sample (session.c:1192)
> ==24515== by 0x4BEE29: machines__deliver_event (session.c:1229)
> ==24515== by 0x4BF770: perf_session__deliver_event (session.c:1286)
> ==24515== by 0x4BF770: ordered_events__deliver_event (session.c:114)
> ==24515== by 0x4C1D17: __ordered_events__flush (ordered-events.c:207)
> ==24515== by 0x4C1D17: ordered_events__flush.part.3 (ordered-events.c:274)
> ==24515== by 0x4BF44C: perf_session__process_user_event (session.c:1325)
> ==24515== by 0x4BF44C: perf_session__process_event (session.c:1451)
> ==24515== Address 0x807c6a0 is 0 bytes inside a block of size 4,096 alloc'd
> ==24515== at 0x4C29C0F: malloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
> ==24515== by 0x4A5BCB: dso__load (symbol.c:1421)
> ==24515== by 0x4BB1AE: map__load (map.c:289)
> ==24515== by 0x4BB1AE: map__find_symbol (map.c:333)
> ==24515== by 0x4835B3: thread__find_addr_location (event.c:1300)
> ==24515== by 0x4B5342: add_callchain_ip (machine.c:1652)
> ==24515== by 0x4B5342: thread__resolve_callchain_sample (machine.c:1906)
> ==24515== by 0x4B9E7D: thread__resolve_callchain (machine.c:1958)
> ==24515== by 0x441B3E: process_event (builtin-script.c:795)
> ==24515== by 0x441B3E: process_sample_event (builtin-script.c:920)
> ==24515== by 0x4BEE29: perf_evlist__deliver_sample (session.c:1192)
> ==24515== by 0x4BEE29: machines__deliver_event (session.c:1229)
> ==24515== by 0x4BF770: perf_session__deliver_event (session.c:1286)
> ==24515== by 0x4BF770: ordered_events__deliver_event (session.c:114)
> ==24515== by 0x4C1D17: __ordered_events__flush (ordered-events.c:207)
> ==24515== by 0x4C1D17: ordered_events__flush.part.3 (ordered-events.c:274)
> ==24515== by 0x4BF44C: perf_session__process_user_event (session.c:1325)
> ==24515== by 0x4BF44C: perf_session__process_event (session.c:1451)
> ==24515== by 0x4C0EAC: __perf_session__process_events (session.c:1804)
> ==24515== by 0x4C0EAC: perf_session__process_events (session.c:1858)
The reason was a typo that passed global 'name' variable as the
is_regular_file argument instead dso->long_name.
Reported-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 403567217d3f ("perf symbols: Do not read symbols/data from device files")
Link: http://lkml.kernel.org/r/1466772025-17471-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To match the semantics for list.h in the kernel, that are the
interface we use in them.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-0b5i2ki9c3di6706fxpticsb@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Use path/to/bin/buildid/elf instead of path/to/bin/buildid
to store corresponding elf binary.
This also stores vdso in buildid/vdso, kallsyms in buildid/kallsyms.
Note that the existing caches are not updated until user adds
or updates the cache. Anyway, if there is the old style build-id
cache it falls back to use it. (IOW, it is backward compatible)
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20160528151537.16098.85815.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Cleanup the code flow of dso__find_kallsyms() to remove redundant
checking code and add some comment for readability.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20160528151522.16098.43446.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Introduce filename__readable to check readability by opening the file
directly. Since the access(R_OK) just checks the readability based on
real UID/GID, it is ignored that the effective UID/GID and capabilities
for some special file (e.g. /proc/kcore).
filename__readable() directly opens given file with O_RDONLY so that the
kernel checks it by effective UID/GID and capabilities.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20160528151513.16098.97576.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
If kptr_restrict is set to 2, even root is not allowed to see pointers.
This patch checks kptr_restrict even if euid == 0. For root, report
error if kptr_restrict is 2.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1464081688-167940-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This patch moves the reference of buildid dir to 'symfs/.debug' and
skips the local buildid dir when '--symfs' is given, so that every
single file opened by perf is relative to symfs directory now.
Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: David Ahern <dsahern@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1463658462-85131-2-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Instead of using a raw string, use DSO__NAME_KALLSYMS and
DSO__NAME_KCORE macros for kallsyms and kcore.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20160515031935.4017.50971.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Use lsdir() to search in kcore cache directory. This also avoids
checking hidden dot directory entries, because kcore cache directories
must always have the name from timestamps when taking the kcore
snapshots, and it never start with dot.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20160511135208.23943.68071.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Use the existing SBUILD_ID_SIZE macro instead of the equivalent
BUILD_ID_SIZE * 2 + 1 expression for allocating a buffer for build-id
strings.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20160511135159.23943.57120.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The current method for inserting symbols is to use the symbols__insert()
function. However symbols__insert() does not update the dso symbol
cache. This causes problems in the following scenario:
1. symbol not found at addr using dso__find_symbol
2. symbol inserted at addr using the existing symbols__insert function
3. symbol still not found at addr using dso__find_symbol() because cache isn't
updated. This is undesired behavior.
The undesired behavior in (3) is addressed by creating a new function,
dso__insert_symbol() to both insert the symbol and update the symbol
cache if necessary.
If dso__insert_symbol() is used in (2) instead of symbols__insert(),
then the undesired behavior in (3) is avoided.
Signed-off-by: Chris Phlipot <cphlipot0@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1462937209-6032-2-git-send-email-cphlipot0@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This change introduces a fix to symbols__find, so that it is able to
find symbols of length zero (where start == end).
The current code has the following problem:
- The current implementation of symbols__find is unable to find any symbols
of length zero.
- The db-export framework explicitly creates zero length symbols at
locations where no symbol currently exists.
The combination of the two above behaviors results in behavior similar
to the example below.
1. addr_location is created for a sample, but symbol is unable to be
resolved.
2. db export creates an "unknown" symbol of length zero at that address
and inserts it into the dso.
3. A new sample comes in at the same address, but symbol__find is unable
to find the zero length symbol, so it is still unresolved.
4. db export sees the symbol is unresolved, and allocated a duplicate
symbol, even though it already did this in step 2.
This behavior continues every time an address without symbol information
is seen, which causes a very large number of these symbols to be
allocated.
The effect of this fix can be observed by looking at the contents of an
exported database before/after the fix (generated with
scripts/python/export-to-postgresql.py)
Ex.
BEFORE THE CHANGE:
example_db=# select count(*) from symbols;
count
--------
900213
(1 row)
example_db=# select count(*) from symbols where symbols.name='unknown';
count
--------
897355
(1 row)
example_db=# select count(*) from symbols where symbols.name!='unknown';
count
-------
2858
(1 row)
AFTER THE CHANGE:
example_db=# select count(*) from symbols;
count
-------
25217
(1 row)
example_db=# select count(*) from symbols where name='unknown';
count
-------
22359
(1 row)
example_db=# select count(*) from symbols where name!='unknown';
count
-------
2858
(1 row)
Signed-off-by: Chris Phlipot <cphlipot0@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1462612620-25008-1-git-send-email-cphlipot0@gmail.com
[ Moved the test to later in the rb_tree tests, as this not the likely case ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Before the support for using /proc/kcore was introduced, the kallsyms
routines used /proc/modules and the first 'perf test' entry expected
finding maps for each module in the system, which is not the case with
the kcore code. Provide a way to ignore kcore files so that the test can
have its expectations met.
Improving the test to cover kcore files as well needs to be done.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ek5urnu103dlhfk4l6pcw041@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To disentangle symbol printing from all the code related to symbol
tables, resolution of addresses to symbols, etc.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-eik9g3hbtdc7ddv57f1d4v3p@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The fprintf_sym() and fprintf_callchain() methods now allow users to
change the existing behaviour of showing "[unknown]" as the name of
unresolved symbols to instead show "[0x123456]", i.e. its address.
The current patch doesn't change tools to use this facility, the results
from 'perf trace' and 'perf script' cotinue like:
70.109 ( 0.001 ms): qemu-system-x8/10153 poll(ufds: 0x7f2d93ffe870, nfds: 1) = 0 Timeout
[unknown] (/usr/lib64/libc-2.22.so)
[unknown] (/usr/lib64/libspice-server.so.1.10.0)
[unknown] (/usr/lib64/libspice-server.so.1.10.0)
[unknown] (/usr/lib64/libspice-server.so.1.10.0)
start_thread+0xca (/usr/lib64/libpthread-2.22.so)
__clone+0x6d (/usr/lib64/libc-2.22.so)
The next patch will make 'perf trace' use the new formatting.
Suggested-by: Milian Wolff <milian.wolff@kdab.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-fja1ods5vqpg42mdz09xcz3r@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Before this patch, if a sample is triggered inside a module not in
/lib/modules/`uname -r`/, even if the module is in buildid-cache, 'perf
report' will still be unable to find the correct symbol. For example:
# rm -rf ~/.debug/
# perf buildid-cache -a ./mymodule.ko
# perf probe -m ./mymodule.ko -a get_mymodule_val
Added new event:
probe:get_mymodule_val (on get_mymodule_val in mymodule)
You can now use it in all perf tools, such as:
perf record -e probe:get_mymodule_val -aR sleep 1
# perf record -e probe:get_mymodule_val cat /proc/mymodule
mymodule:3
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.011 MB perf.data (1 samples) ]
# perf report --stdio
[SNIP]
#
# Overhead Command Shared Object Symbol
# ........ ....... ................ ......................
#
100.00% cat [mymodule] [k] 0x0000000000000001
# perf report -vvvv --stdio
dso__load_sym: adjusting symbol: st_value: 0 sh_addr: 0 sh_offset: 0x70
symbol__new: get_mymodule_val 0x70-0x8a
[SNIP]
This is caused by dso__load() -> dso__load_sym(). In dso__load(), kmod
is true only when its file is found in some well know directories. All
files loaded from buildid-cache are treated as user programs. Following
dso__load_sym() set map->pgoff incorrectly.
This patch gives kernel modules in buildid-cache a chance to adjust
value of kmod. After dso__load() get the type of symbols, if it is
buildid, check the last 3 chars of original filename against '.ko', and
adjust the value of kmod if the file is a kernel module.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1454680939-24963-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
With mem sampling we could get data source within mapped device file.
Processing such sample would block during report phase on trying to read
the device file.
Chacking for device files and skip the processing if it's detected.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453290995-18485-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
We need to use the long name (the filename) when reading the build-id
from a DSO. Using the short name doesn't work for (at least) vDSOs.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20160113172301.GT28542@decadent.org.uk
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The event group view feature is to see related events together. To use
the group view, events should be recorded as a group with a dedicated
syntax of surrounding events by braces (-e '{ evt1, evt2, ... }').
Also 'perf report' also requires the --group option to enable it.
However it's almost always beneficial to use the group view to see the
group events as it's more expressive. And I think it's more natural to
see events together if they are recorded as a group.
Thus this patch changes the default value to enable it. If users don't
want to see like it and keep the original behavior, they can set the
report.group config variable to false and/or use --no-group option in
the 'perf report' command line.
Requested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Taeung Song <treeze.taeung@gmail.com>
Link: http://lkml.kernel.org/r/1448807057-3506-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Currently when debuginfo is separated to vmlinux.debug, it's contents
get ignored. Let's change that and add it to the vmlinux_path list.
Signed-off-by: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>
Acked-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1448469166-61363-3-git-send-email-tumanova@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Refactor vmlinux_path__init() to ease subsequent additions of new
vmlinux locations.
Signed-off-by: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>
Acked-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1448469166-61363-2-git-send-email-tumanova@linux.vnet.ibm.com
[ Rename vmlinux_path__update() to vmlinux_path__add() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When the root user tries to read a file owned by some other user we get:
# ls -la perf.data
-rw-------. 1 acme acme 20032 Nov 12 15:50 perf.data
# perf report
File perf.data not owned by current user or root (use -f to override)
# perf report -f | grep -v ^# | head -2
30.96% ls [kernel.vmlinux] [k] do_set_pte
28.24% ls libc-2.20.so [.] intel_check_word
#
That wasn't happening when the symbol code tried to read a JIT map,
where the same check was done but no forcing was possible, fix it.
Reported-by: Brendan Gregg <brendan.d.gregg@gmail.com>
Tested-by: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://permalink.gmane.org/gmane.linux.kernel.perf.user/2380
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Normally symbols are read from the DSO and adjusted, if need be, so that
the symbol start matches the file offset in the DSO file (we want the
file offset because that is what we know from MMAP events). That is done
by dso__load_sym() which inserts the symbols *after* adjusting them.
In the case of kcore, the symbols have been read from kallsyms and the
symbol start is the memory address. The symbols have to be adjusted to
match the kcore file offsets. dso__split_kallsyms_for_kcore() does that,
but now the adjustment is being done *after* the symbols have been
inserted. It appears dso__split_kallsyms_for_kcore() was assuming that
changing the symbol start would not change the order in the rbtree -
which is, of course, not guaranteed.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Wang Nan <wangnan0@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/563CB241.2090701@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Currently we split symbols based on the map comparison, but symbols are stored
within dso objects and maps could point into same dso objects (kernel maps).
Hence we could end up changing rbtree we are currently iterating and mess it
up. It's easily reproduced on s390x by running:
$ perf record -a -- sleep 3
$ perf buildid-list -i perf.data --with-hits
The fix is to compare dso objects instead.
Reported-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20151026135130.GA26003@krava.brq.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Recent GDB (at least on a vanilla Debian box) looks for debug information in
/usr/lib/debug/.build-id/nn/nnnnnnn
where nn/nnnnnn is the build-id of the stripped ELF binary. This is
documented here:
https://sourceware.org/gdb/onlinedocs/gdb/Separate-Debug-Files.html
This was not working in perf because we didn't read the build id until
AFTER we searched for the separate debug information file. This patch
reads the build ID and THEN does the search.
Signed-off-by: Dima Kogan <dima@secretsauce.net>
Link: http://lkml.kernel.org/r/87si6pfwz4.fsf@secretsauce.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Not as the first attempt at finding a vmlinux for the running kernel,
this way we get a more informative filename to present in tools, it will
check that the build-id is the same as the one previously loaded in the
DSO in dso->build_id, reading from /sys/kernel/notes, for instance.
E.g. in the annotation TUI, going from 'perf top', for the scsi_sg_alloc
kernel function, in the first line:
Before:
scsi_sg_alloc /root/.debug/.build-id/28/2777c262e6b3c0451375163c9a81c893218ab1
After:
scsi_sg_alloc /lib/modules/4.3.0-rc1+/build/vmlinux
And:
# ls -la /root/.debug/.build-id/28/2777c262e6b3c0451375163c9a81c893218ab1
lrwxrwxrwx. 1 root root 81 Sep 22 16:11 /root/.debug/.build-id/28/2777c262e6b3c0451375163c9a81c893218ab1 -> ../../home/git/build/v4.3.0-rc1+/vmlinux/282777c262e6b3c0451375163c9a81c893218ab1
# file ~/.debug/home/git/build/v4.3.0-rc1+/vmlinux/282777c262e6b3c0451375163c9a81c893218ab1
/root/.debug/home/git/build/v4.3.0-rc1+/vmlinux/282777c262e6b3c0451375163c9a81c893218ab1: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), statically linked, BuildID[sha1]=282777c262e6b3c0451375163c9a81c893218ab1, not stripped
#
The same as:
# file /lib/modules/4.3.0-rc1+/build/vmlinux
/lib/modules/4.3.0-rc1+/build/vmlinux: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), statically linked, BuildID[sha1]=282777c262e6b3c0451375163c9a81c893218ab1, not stripped
Furthermore:
# sha256sum /lib/modules/4.3.0-rc1+/build/vmlinux
e7a789bbdc61029ec09140c228e1dd651271f38ef0b8416c0b7d5ff727b98be2 /lib/modules/4.3.0-rc1+/build/vmlinux
# sha256sum ~/.debug/home/git/build/v4.3.0-rc1+/vmlinux/282777c262e6b3c0451375163c9a81c893218ab1
e7a789bbdc61029ec09140c228e1dd651271f38ef0b8416c0b7d5ff727b98be2 /root/.debug/home/git/build/v4.3.0-rc1+/vmlinux/282777c262e6b3c0451375163c9a81c893218ab1
[root@zoo new]#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-9y42ikzq3jisiddoi6f07n8z@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
