summaryrefslogtreecommitdiff
path: root/tools/testing/selftests/efivarfs
AgeCommit message (Collapse)AuthorFilesLines
2023-10-18selftests/efivarfs: create-read: fix a resource leakzhujun21-0/+2
The opened file should be closed in main(), otherwise resource leak will occur that this problem was discovered by code reading Signed-off-by: zhujun2 <zhujun2@cmss.chinamobile.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-11-22selftests/efivarfs: Add checking of the test return valueZhao Gongyi1-0/+5
Add checking of the test return value, otherwise it will report success forever for test_create_read(). Fixes: dff6d2ae56d0 ("selftests/efivarfs: clean up test files from test_create*()") Signed-off-by: Zhao Gongyi <zhaogongyi@huawei.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-03-25.gitignore: add SPDX License IdentifierMasahiro Yamada1-0/+1
Add SPDX License Identifier to all .gitignore files. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-20selftests/efivarfs: clean up test files from test_create*()Po-Hsu Lin1-19/+13
Test files created by test_create() and test_create_empty() tests will stay in the $efivarfs_mount directory until the system was rebooted. When the tester tries to run this efivarfs test again on the same system, the immutable characteristics in that directory will cause some "Operation not permitted" noises, and a false-positve test result as the file was created in previous run. -------------------- running test_create -------------------- ./efivarfs.sh: line 59: /sys/firmware/efi/efivars/test_create-210be57c-9849-4fc7-a635-e6382d1aec27: Operation not permitted [PASS] -------------------- running test_create_empty -------------------- ./efivarfs.sh: line 78: /sys/firmware/efi/efivars/test_create_empty-210be57c-9849-4fc7-a635-e6382d1aec27: Operation not permitted [PASS] -------------------- Create a file_cleanup() to remove those test files in the end of each test to solve this issue. For the test_create_read, we can move the clean up task to the end of the test to ensure the system is clean. Also, use this function to replace the existing file removal code. Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2019-04-09selftests: efivarfs: remove the test_create_read file if it was existZhangXiaoxu1-0/+4
After the first run, the test case 'test_create_read' will always fail because the file is exist and file's attr is 'S_IMMUTABLE', open with 'O_RDWR' will always return -EPERM. Signed-off-by: ZhangXiaoxu <zhangxiaoxu5@huawei.com> Signed-off-by: Shuah Khan <shuah@kernel.org>
2018-09-05selftests/efivarfs: add required kernel configsLei Yang1-0/+1
add config file Signed-off-by: Lei Yang <Lei.Yang@windriver.com> Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2018-05-31selftests: efivarfs: return Kselftest Skip code for skipped testsShuah Khan (Samsung OSG)1-2/+5
When efivarfs test is skipped because of unmet dependencies and/or unsupported configuration, it returns 0 which is treated as a pass by the Kselftest framework. This leads to false positive result even when the test could not be run. Change it to return kselftest skip code when a test gets skipped to clearly report that the test could not be run. Kselftest framework SKIP code is 4 and the framework prints appropriate messages to indicate that the test is skipped. Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman3-0/+3
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-05selftests: remove duplicated all and clean targetbamvor.zhangjian@huawei.com1-7/+1
Currently, kselftest use TEST_PROGS, TEST_PROGS_EXTENDED, TEST_FILES to indicate the test program, extended test program and test files. It is easy to understand the purpose of these files. But mix of compiled and uncompiled files lead to duplicated "all" and "clean" targets. In order to remove the duplicated targets, introduce TEST_GEN_PROGS, TEST_GEN_PROGS_EXTENDED, TEST_GEN_FILES to indicate the compiled objects. Also, the later patch will make use of TEST_GEN_XXX to redirect these files to output directory indicated by KBUILD_OUTPUT or O. And add this changes to "Contributing new tests(details)" of Documentation/kselftest.txt. Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2016-02-10efi: Make efivarfs entries immutable by defaultPeter Jones2-4/+87
"rm -rf" is bricking some peoples' laptops because of variables being used to store non-reinitializable firmware driver data that's required to POST the hardware. These are 100% bugs, and they need to be fixed, but in the mean time it shouldn't be easy to *accidentally* brick machines. We have to have delete working, and picking which variables do and don't work for deletion is quite intractable, so instead make everything immutable by default (except for a whitelist), and make tools that aren't quite so broad-spectrum unset the immutable flag. Signed-off-by: Peter Jones <pjones@redhat.com> Tested-by: Lee, Chun-Yi <jlee@suse.com> Acked-by: Matthew Garrett <mjg59@coreos.com> Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
2015-10-16selftests: add .gitignore for efivarfsYuan Sun1-0/+2
Signed-off-by: Yuan Sun <sunyuan3@huawei.com> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-03-20selftests: Set CC using CROSS_COMPILE once in lib.mkMichael Ellerman1-1/+0
This avoids repeating the logic in every Makefile. We mimic the top-level Makefile and use $(CROSS_COMPILE)gcc. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-03-14selftests: Add install targetMichael Ellerman1-0/+1
This adds make install support to selftests. The basic usage is: $ cd tools/testing/selftests $ make install That installs into tools/testing/selftests/install, which can then be copied where ever necessary. The install destination is also configurable using eg: $ INSTALL_PATH=/mnt/selftests make install The implementation uses two targets in the child makefiles. The first "install" is expected to install all files into $(INSTALL_PATH). The second, "emit_tests", is expected to emit the test instructions (ie. bash script) on stdout. Separating this from install means the child makefiles need no knowledge of the location of the test script. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-03-14selftests: Introduce minimal shared logic for running testsMichael Ellerman2-2/+3
This adds a Make include file which most selftests can then include to get the run_tests logic. On its own this has the advantage of some reduction in repetition, and also means the pass/fail message is defined in fewer places. However the key advantage is it will allow us to implement install very simply in a subsequent patch. The default implementation just executes each program in $(TEST_PROGS). We use a variable to hold the default implementation of $(RUN_TESTS) because that gives us a clean way to override it if necessary, ie. using override. The mount, memory-hotplug and mqueue tests use that to provide a different implementation. Tests are not run via /bin/bash, so if they are scripts they must be executable, we add a+x to several. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2013-03-06efivars: efivarfs_valid_name() should handle pstore syntaxMatt Fleming1-0/+59
Stricter validation was introduced with commit da27a24383b2b ("efivarfs: guid part of filenames are case-insensitive") and commit 47f531e8ba3b ("efivarfs: Validate filenames much more aggressively"), which is necessary for the guid portion of efivarfs filenames, but we don't need to be so strict with the first part, the variable name. The UEFI specification doesn't impose any constraints on variable names other than they be a NULL-terminated string. The above commits caused a regression that resulted in users seeing the following message, $ sudo mount -v /sys/firmware/efi/efivars mount: Cannot allocate memory whenever pstore EFI variables were present in the variable store, since their variable names failed to pass the following check, /* GUID should be right after the first '-' */ if (s - 1 != strchr(str, '-')) as a typical pstore filename is of the form, dump-type0-10-1-<guid>. The fix is trivial since the guid portion of the filename is GUID_LEN bytes, we can use (len - GUID_LEN) to ensure the '-' character is where we expect it to be. (The bogus ENOMEM error value will be fixed in a separate patch.) Reported-by: Joseph Yasi <joe.yasi@gmail.com> Tested-by: Joseph Yasi <joe.yasi@gmail.com> Reported-by: Lingzhu Xiang <lxiang@redhat.com> Cc: Josh Boyer <jwboyer@redhat.com> Cc: Jeremy Kerr <jk@ozlabs.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: <stable@vger.kernel.org> # v3.8 Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2013-02-28selftests/efivarfs: add create-read testJeremy Kerr3-1/+46
Test that reads from a newly-created efivarfs file (with no data written) will return EOF. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Cc: Matt Fleming <matt.fleming@intel.com> Cc: Lingzhu Xiang <lxiang@redhat.com> Cc: Dave Young <dyoung@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-28selftests/efivarfs: add empty file creation testJeremy Kerr1-0/+13
Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Cc: Matt Fleming <matt.fleming@intel.com> Cc: Lingzhu Xiang <lxiang@redhat.com> Cc: Dave Young <dyoung@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-28selftests: add tests for efivarfsJeremy Kerr3-0/+194
This change adds a few initial efivarfs tests to the tools/testing/selftests directory. The open-unlink test is based on code from Lingzhu Xiang. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Cc: Matt Fleming <matt.fleming@intel.com> Cc: Lingzhu Xiang <lxiang@redhat.com> Cc: Dave Young <dyoung@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>