| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Just to slightly improve the precision of the duration of the first
test.
In mptcp_join.sh, the last append_prev_results is now done as soon as
the last test is over: this will add the last result in the list, and
get a more precise time for this last test.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240906-net-next-mptcp-ksft-subtest-time-v2-3-31d5ee4f3bdf@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
These tests are flaky since their introduction. This might be less or
not visible depending on the CI running the tests, especially if it is
also busy doing other tasks in parallel.
A first analysis shown that the transfer can be slowed down when there
are some re-injections at the MPTCP level. Such re-injections can of
course happen, and disturb the transfer, but it looks strange to have
them in this lab. That could be caused by the kernel having access to
less CPU cycles -- e.g. when other activities are executed in parallel
-- or by a misinterpretation on the MPTCP packet scheduler side.
While this is being investigated, the tests are marked as flaky not to
create noises in other CIs.
Fixes: 219d04992b68 ("mptcp: push pending frames when subflow has free space")
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/475
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240524-upstream-net-20240524-selftests-mptcp-flaky-v1-2-a352362f3f8e@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch adds '-i' option for mptcp_sockopt.sh, pm_netlink.sh, and
simult_flows.sh, to use 'ip mptcp' command in the tests instead of
'pm_nl_ctl'. Update usage() correspondingly.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use those newly added pm_nl endpoint ops helpers to replace all 'pm_nl_ctl'
commands with 'limits', 'add', 'del', 'flush', 'show' and 'set' arguments
in scripts mptcp_sockopt.sh and simult_flows.sh.
In pm_netlink.sh, add wrappers of there helpers to make the function names
shorter. Then use the wrappers to replace all 'pm_nl_ctl' commands.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
'delay 1' in tc-netem is confusing, not sure if it's a delay of 1 second or
1 millisecond. This patch explicitly adds millisecond units to make these
commands clearer.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
tc are used in some test scripts: mptcp_connect.sh, mptcp_join.sh and
simult_flows.sh. It makes sense to check if tc is installed before running
these scripts, just like other tools. So this patch add 'tc' check for
mptcp_lib_check_tools(), and check it in these test scripts.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch uses the public var KSFT_SKIP in mptcp_lib.sh instead of
ksft_skip, and drop 'ksft_skip=4' in mptcp_join.sh.
Use KSFT_PASS and KSFT_FAIL macros instead of 0 and 1 after 'exit '
and 'ret=' in all scripts:
exit 0 -> exit ${KSFT_PASS}
exit 1 -> exit ${KSFT_FAIL}
ret=0 -> ret=${KSFT_PASS}
ret=1 -> ret=${KSFT_FAIL}
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-15-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To unify the output formats of all test scripts, this patch adds
four more helpers:
mptcp_lib_pr_ok()
mptcp_lib_pr_skip()
mptcp_lib_pr_fail()
mptcp_lib_pr_info()
to print out [ OK ], [SKIP], [FAIL] and 'INFO: ' with colors. Use them
in all scripts to print the "ok/skip/fail/info' using the same 'format'.
Having colors helps to quickly identify issues when looking at a long
list of output logs and results.
Note that now all print the same keywords, which was not the case
before, but it is good to uniform that.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-9-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch adds a new helper mptcp_lib_print_title(), a wrapper of
mptcp_lib_inc_test_counter() and mptcp_lib_pr_title_counter(), to
print out test counter in each test result and increase the counter.
Use this helper to print out test counters for every tests in diag.sh,
mptcp_connect.sh, mptcp_sockopt.sh, pm_netlink.sh, simult_flows.sh,
and userspace_pm.sh.
diag.sh:
01 no msk on netns creation [ ok ]
02 listen match for dport 10000 [ ok ]
03 listen match for sport 10000 [ ok ]
04 listen match for saddr and sport [ ok ]
05 all listen sockets [ ok ]
mptcp_connect.sh:
01 New MPTCP socket can be blocked via sysctl [ OK ]
02 Validating network environment with pings [ OK ]
INFO: Using loss of 0.85% delay 31 ms reorder .. with delay 7ms on ns3eth4
03 ns1 MPTCP -> ns1 (10.0.1.1:10000 ) MPTCP (duration 69ms) [ OK ]
04 ns1 MPTCP -> ns1 (10.0.1.1:10001 ) TCP (duration 20ms) [ OK ]
05 ns1 TCP -> ns1 (10.0.1.1:10002 ) MPTCP (duration 16ms) [ OK ]
mptcp_sockopt.sh:
01 Transfer v4 [ OK ]
02 Mark v4 [ OK ]
03 Transfer v6 [ OK ]
04 Mark v6 [ OK ]
05 SOL_MPTCP sockopt v4 [ OK ]
pm_netlink.sh:
01 defaults addr list [ OK ]
02 simple add/get addr [ OK ]
03 dump addrs [ OK ]
04 simple del addr [ OK ]
05 dump addrs after del [ OK ]
simult_flows.sh:
01 balanced bwidth 7391 max 8456 [ OK ]
02 balanced bwidth - reverse direction 7403 max 8456 [ OK ]
03 balanced bwidth with unbalanced delay 7429 max 8456 [ OK ]
04 balanced bwidth with unbalanced delay - reverse ... 7485 max 8456 [ OK ]
05 unbalanced bwidth 7549 max 8456 [ OK ]
userspace_pm.sh:
01 Created network namespaces ns1, ns2 [ OK ]
INFO: Make connections
02 Established IPv4 MPTCP Connection ns2 => ns1 [ OK ]
03 Established IPv6 MPTCP Connection ns2 => ns1 [ OK ]
INFO: Announce tests
04 ADD_ADDR 10.0.2.2 (ns2) => ns1, invalid token [ OK ]
05 ADD_ADDR id:67 10.0.2.2 (ns2) => ns1, reuse port [ OK ]
Having test counters helps to quickly identify issues when looking at a
long list of output logs and results.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-7-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Variable TEST_COUNT are used in mptcp_connect.sh and mptcp_join.sh as
test counters, which are initialized to 0, while variable test_cnt are used
in diag.sh and simult_flows.sh, which are initialized to 1. To maintain
consistency, this patch renames them all as MPTCP_LIB_TEST_COUNTER,
initializes it to 1, and exports it into mptcp_lib.sh.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-5-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
shellcheck recently helped to prevent issues. It is then good to fix the
other harmless issues in order to spot "real" ones later.
Here, two categories of warnings are now ignored:
- SC2317: Command appears to be unreachable. The cleanup() function is
invoked indirectly via the EXIT trap.
- SC2086: Double quote to prevent globbing and word splitting. This is
recommended, but the current usage is correct and there is no need to
do all these modifications to be compliant with this rule.
For the modifications:
- SC2034: ksft_skip appears unused.
- SC2004: $/${} is unnecessary on arithmetic variables.
Now this script is shellcheck (0.9.0) compliant. We can easily spot new
issues.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240306-upstream-net-next-20240304-selftests-mptcp-shared-code-shellcheck-v2-11-bc79e6e5e6a0@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Set more the default sysctl values in mptcp_lib_ns_init(). It is fine to
do that everywhere, because they could be overridden latter if needed.
mptcp_lib_ns_exit() now also try to remove temp netns files used for the
stats even for selftests not using them. That's fine to do that because
these files have a unique name.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240306-upstream-net-next-20240304-selftests-mptcp-shared-code-shellcheck-v2-5-bc79e6e5e6a0@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add helpers mptcp_lib_ns_init() and mptcp_lib_ns_exit() in mptcp_lib.sh
to initialize and delete the given namespaces. Then every test script
can invoke these helpers and use all namespaces.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240306-upstream-net-next-20240304-selftests-mptcp-shared-code-shellcheck-v2-4-bc79e6e5e6a0@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch adds local variables rndh in do_transfer() functions both in
mptcp_connect.sh and simult_flows.sh, setting it with ${ns1:4}, not the
global variable rndh. The global one is hidden in the next commit.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240306-upstream-net-next-20240304-selftests-mptcp-shared-code-shellcheck-v2-3-bc79e6e5e6a0@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch exports check_tools() helper from mptcp_join.sh into
mptcp_lib.sh as a public one mptcp_lib_check_tools(). The arguments
"ip", "ss", "iptables" and "ip6tables" are passed into this helper
to indicate whether to check ip tool, ss tool, iptables and ip6tables
tools.
This helper can be used in every scripts.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240306-upstream-net-next-20240304-selftests-mptcp-shared-code-shellcheck-v2-2-bc79e6e5e6a0@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The variables 'large', 'small', 'sout', 'cout', 'capout' and 'size' are
used in multiple functions, so they should be clearly defined as global
variables at the top of the file.
This patch redefines them at the beginning of simult_flows.sh.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-next-20240223-misc-improvements-v1-6-b6c8a10396bd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The selftest was correctly recording all the results, but the 'reverse
direction' part was missing in the name when needed.
It is important to have a unique (sub)test name in TAP, because some CI
environments drop tests with duplicated name.
Fixes: 675d99338e7a ("selftests: mptcp: simult flows: format subtests results in TAP")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When running the simult_flow selftest in slow environments -- e.g. QEmu
without KVM support --, the results can be unstable. This selftest
checks if the aggregated bandwidth is (almost) fully used as expected.
To help improving the stability while still keeping the same validation
in place, the BW and the delay are reduced to lower the pressure on the
CPU.
Fixes: 1a418cb8e888 ("mptcp: simult flow self-tests")
Fixes: 219d04992b68 ("mptcp: push pending frames when subflow has free space")
Cc: stable@vger.kernel.org
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1-6-4c1c11e571ff@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To avoid duplicated code in different MPTCP selftests, we can add
and use helpers defined in mptcp_lib.sh.
wait_local_port_listen() helper is defined in diag.sh, mptcp_connect.sh,
mptcp_join.sh and simult_flows.sh, export it into mptcp_lib.sh and
rename it with mptcp_lib_ prefix. Use this new helper in all these
scripts.
Note: We only have IPv4 connections in this helper, not looking at IPv6
(tcp6) but that's OK because we only have IPv4 connections here in diag.sh.
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231128-send-net-next-2023107-v4-15-8d6b94150f6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The current selftests infrastructure formats the results in TAP 13. This
version doesn't support subtests and only the end result of each
selftest is taken into account. It means that a single issue in a
subtest of a selftest containing multiple subtests forces the whole
selftest to be marked as failed. It also means that subtests results are
not tracked by CIs executing selftests.
MPTCP selftests run hundreds of various subtests. It is then important
to track each of them and not one result per selftest.
It is particularly interesting to do that when validating stable kernels
with the last version of the test suite: tests might fail because a
feature is not supported but the test didn't skip that part. In this
case, if subtests are not tracked, the whole selftest will be marked as
failed making the other subtests useless because their results are
ignored.
This patch formats subtests results in TAP in simult_flows.sh selftest.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Selftests are supposed to run on any kernels, including the old ones not
supporting MPTCP.
A new check is then added to make sure MPTCP is supported. If not, the
test stops and is marked as "skipped".
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 1a418cb8e888 ("mptcp: simult flow self-tests")
Cc: stable@vger.kernel.org
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The definition of 'rndh' was probably copied from one script to another
but some times, 'sec' was not defined, not used and/or not spelled
properly.
Here all the 'rndh' are now defined the same way.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some variables were set but never used.
This was not causing any issues except adding some confusion and having
shellcheck complaining about them.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tools/lib/bpf/ringbuf.c
927cbb478adf ("libbpf: Handle size overflow for ringbuf mmap")
b486d19a0ab0 ("libbpf: checkpatch: Fixed code alignments in ringbuf.c")
https://lore.kernel.org/all/20221121122707.44d1446a@canb.auug.org.au/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The estimated time was supposing the rate was expressed in mibit
(bit * 1024^2) but it is in mbit (bit * 1000^2).
This makes the threshold higher but in a more realistic way to avoid
false positives reported by CI instances.
Before this patch, the thresholds were at 7561/4005ms and now they are
at 7906/4178ms.
While at it, also fix a typo in the linked comment, spotted by Mat.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/310
Fixes: 1a418cb8e888 ("mptcp: simult flow self-tests")
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
'time' is the local variable of run_test() function, while 'max_time' is
the local variable of do_transfer() function. So in do_transfer(),
$max_time should be used, not $time.
Please note that here $time == $max_time so the behaviour is not changed
but the right variable is used.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The mentioned test measures the transfer run-time to verify
that the user-space program is able to use the full aggregate B/W.
Even on (virtual) link-speed-bound tests, debug kernel can slow
down the transfer enough to cause sporadic test failures.
Instead of unconditionally raising the maximum allowed run-time,
tweak when the running kernel is a debug one, and use some simple/
rough heuristic to guess such scenarios.
Note: this intentionally avoids looking for /boot/config-<version> as
the latter file is not always available in our reference CI
environments.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Co-developed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently the simult_flows.sh self-tests are not very stable,
especially when running on slow VMs.
The tests measure runtime for transfers on multiple subflows
and check that the time is near the theoretical maximum.
The current test infra introduces a bit of jitter in test
runtime, due to multiple explicit delays. Additionally the
runtime is measured by the shell script wrapper. On a slow
VM, the script overhead is measurable and subject to relevant
jitter.
One solution to make the test more stable would be adding more
slack to the expected time; that could possibly hide real
regressions. Instead move the measurement inside the command
doing the transfer, and drop most unneeded sleeps.
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
'$cin' and '$sin' variables are local to a function: they are then not
available from the cleanup trap.
Instead, we need to use '$large' and '$small' that are not local and
defined just before setting the trap.
Without this patch, running this script in a loop might cause a:
write: No space left on device
issue.
Fixes: 1a418cb8e888 ("mptcp: simult flow self-tests")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To turn rp_filter off we should:
echo 0 > /proc/sys/net/ipv4/conf/default/rp_filter
and
echo 0 > /proc/sys/net/ipv4/conf/all/rp_filter
before NIC created.
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Yonglong Li <liyonglong@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
'mptcp_connect' already has a timeout for poll() but in some cases, it
is not enough.
With "timeout" tool, we will force the command to fail if it doesn't
finish on time. Thanks to that, the script will continue and display
details about the current state before marking the test as failed.
Displaying this state is very important to be able to understand the
issue. Best to have our CI reporting the issue than just "the test
hanged".
Note that in mptcp_connect.sh, we were using a long timeout to validate
the fact we cannot create a socket if a sysctl is set. We don't need
this timeout.
In diag.sh, we want to send signals to mptcp_connect instances that have
been started in the netns. But we cannot send this signal to 'timeout'
otherwise that will stop the timeout and messages telling us SIGUSR1 has
been received will be printed. Instead of trying to find the right PID
and storing them in an array, we can simply use the output of
'ip netns pids' which is all the PIDs we want to send signal to.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/160
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When multiple subflows are active, we can receive a
window update on subflow with no write space available.
MPTCP will try to push frames on such subflow and will
fail. Pending frames will be pushed only after receiving
a window update on a subflow with some wspace available.
Overall the above could lead to suboptimal aggregate
bandwidth usage.
Instead, we should try to push pending frames as soon as
the subflow reaches both conditions mentioned above.
We can finally enable self-tests with asymmetric links,
as the above makes them finally pass.
Fixes: 6f8a612a33e4 ("mptcp: keep track of advertised windows right edge")
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In case of errors, this message was printed:
(...)
balanced bwidth with unbalanced delay 5233 max 5005 [ fail ]
client exit code 0, server 0
\nnetns ns3-0-EwnkPH socket stat for 10003:
(...)
Obviously, the idea was to add a new line before the socket stat and not
print "\nnetns".
The commit 8b974778f998 ("selftests: mptcp: interpret \n as a new line")
is very similar to this one. But the modification in simult_flows.sh was
missed because this commit above was done in parallel to one here below.
Fixes: 1a418cb8e888 ("mptcp: simult flow self-tests")
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a bunch of test-cases for multiple subflow xmit:
create multiple subflows simulating different links
condition via netem and verify that the msk is able
to use completely the aggregated bandwidth.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
