summaryrefslogtreecommitdiff
path: root/tools/testing
AgeCommit message (Collapse)AuthorFilesLines
2023-06-04Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds2-0/+75
Pull kvm fixes from Paolo Bonzini: "ARM: - Address some fallout of the locking rework, this time affecting the way the vgic is configured - Fix an issue where the page table walker frees a subtree and then proceeds with walking what it has just freed... - Check that a given PA donated to the guest is actually memory (only affecting pKVM) - Correctly handle MTE CMOs by Set/Way - Fix the reported address of a watchpoint forwarded to userspace - Fix the freeing of the root of stage-2 page tables - Stop creating spurious PMU events to perform detection of the default PMU and use the existing PMU list instead x86: - Fix a memslot lookup bug in the NX recovery thread that could theoretically let userspace bypass the NX hugepage mitigation - Fix a s/BLOCKING/PENDING bug in SVM's vNMI support - Account exit stats for fastpath VM-Exits that never leave the super tight run-loop - Fix an out-of-bounds bug in the optimized APIC map code, and add a regression test for the race" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: selftests: Add test for race in kvm_recalculate_apic_map() KVM: x86: Bail from kvm_recalculate_phys_map() if x2APIC ID is out-of-bounds KVM: x86: Account fastpath-only VM-Exits in vCPU stats KVM: SVM: vNMI pending bit is V_NMI_PENDING_MASK not V_NMI_BLOCKING_MASK KVM: x86/mmu: Grab memslot for correct address space in NX recovery worker KVM: arm64: Document default vPMU behavior on heterogeneous systems KVM: arm64: Iterate arm_pmus list to probe for default PMU KVM: arm64: Drop last page ref in kvm_pgtable_stage2_free_removed() KVM: arm64: Populate fault info for watchpoint KVM: arm64: Reload PTE after invoking walker callback on preorder traversal KVM: arm64: Handle trap of tagged Set/Way CMOs arm64: Add missing Set/Way CMO encodings KVM: arm64: Prevent unconditional donation of unmapped regions from the host KVM: arm64: vgic: Fix a comment KVM: arm64: vgic: Fix locking comment KVM: arm64: vgic: Wrap vgic_its_create() with config_lock KVM: arm64: vgic: Fix a circular locking issue
2023-06-03Merge tag 'probes-fixes-6.4-rc4' of ↵Linus Torvalds1-18/+27
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull probes fixes from Masami Hiramatsu: - Return NULL if the trace_probe list on trace_probe_event is empty - selftests/ftrace: Choose testing symbol name for filtering feature from sample data instead of fixed symbol * tag 'probes-fixes-6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: selftests/ftrace: Choose target function for filter test from samples tracing/probe: trace_probe_primary_from_call(): checked list_first_entry
2023-06-03selftests/ftrace: Choose target function for filter test from samplesMasami Hiramatsu (Google)1-18/+27
Since the event-filter-function.tc expects the 'exit_mmap()' directly calls 'kmem_cache_free()', this is vulnerable to code modifications. Choose the target function for the filter test from the sample event data so that it can keep test running correctly even if the caller function name will be changed. Link: https://lore.kernel.org/linux-trace-kernel/167919441260.1922645.18355804179347364057.stgit@mhiramat.roam.corp.google.com/ Link: https://lore.kernel.org/all/CA+G9fYtF-XEKi9YNGgR=Kf==7iRb2FrmEC7qtwAeQbfyah-UhA@mail.gmail.com/ Reported-by: Linux Kernel Functional Testing <lkft@linaro.org> Fixes: 7f09d639b8c4 ("tracing/selftests: Add test for event filtering on function name") Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-06-03KVM: selftests: Add test for race in kvm_recalculate_apic_map()Michal Luczaj2-0/+75
Keep switching between LAPIC_MODE_X2APIC and LAPIC_MODE_DISABLED during APIC map construction to hunt for TOCTOU bugs in KVM. KVM's optimized map recalc makes multiple passes over the list of vCPUs, and the calculations ignore vCPU's whose APIC is hardware-disabled, i.e. there's a window where toggling LAPIC_MODE_DISABLED is quite interesting. Signed-off-by: Michal Luczaj <mhal@rbox.co> Co-developed-by: Sean Christopherson <seanjc@google.com> Link: https://lore.kernel.org/r/20230602233250.1014316-4-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com>
2023-06-02Merge tag 'net-6.4-rc5' of ↵Linus Torvalds9-3/+80
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Happy Wear a Dress Day. Fairly standard-sized batch of fixes, accounting for the lack of sub-tree submissions this week. The mlx5 IRQ fixes are notable, people were complaining about that. No fires burning. Current release - regressions: - eth: mlx5e: - multiple fixes for dynamic IRQ allocation - prevent encap offload when neigh update is running - eth: mana: fix perf regression: remove rx_cqes, tx_cqes counters Current release - new code bugs: - eth: mlx5e: DR, add missing mutex init/destroy in pattern manager Previous releases - always broken: - tcp: deny tcp_disconnect() when threads are waiting - sched: prevent ingress Qdiscs from getting installed in random locations in the hierarchy and moving around - sched: flower: fix possible OOB write in fl_set_geneve_opt() - netlink: fix NETLINK_LIST_MEMBERSHIPS length report - udp6: fix race condition in udp6_sendmsg & connect - tcp: fix mishandling when the sack compression is deferred - rtnetlink: validate link attributes set at creation time - mptcp: fix connect timeout handling - eth: stmmac: fix call trace when stmmac_xdp_xmit() is invoked - eth: amd-xgbe: fix the false linkup in xgbe_phy_status - eth: mlx5e: - fix corner cases in internal buffer configuration - drain health before unregistering devlink - usb: qmi_wwan: set DTR quirk for BroadMobi BM818 Misc: - tcp: return user_mss for TCP_MAXSEG in CLOSE/LISTEN state if user_mss set" * tag 'net-6.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (71 commits) mptcp: fix active subflow finalization mptcp: add annotations around sk->sk_shutdown accesses mptcp: fix data race around msk->first access mptcp: consolidate passive msk socket initialization mptcp: add annotations around msk->subflow accesses mptcp: fix connect timeout handling rtnetlink: add the missing IFLA_GRO_ tb check in validate_linkmsg rtnetlink: move IFLA_GSO_ tb check to validate_linkmsg rtnetlink: call validate_linkmsg in rtnl_create_link ice: recycle/free all of the fragments from multi-buffer frame net: phy: mxl-gpy: extend interrupt fix to all impacted variants net: renesas: rswitch: Fix return value in error path of xmit net: dsa: mv88e6xxx: Increase wait after reset deactivation net: ipa: Use correct value for IPA_STATUS_SIZE tcp: fix mishandling when the sack compression is deferred. net/sched: flower: fix possible OOB write in fl_set_geneve_opt() sfc: fix error unwinds in TC offload net/mlx5: Read embedded cpu after init bit cleared net/mlx5e: Fix error handling in mlx5e_refresh_tirs net/mlx5: Ensure af_desc.mask is properly initialized ...
2023-05-30selftests: mptcp: userspace pm: skip if MPTCP is not supportedMatthieu Baerts1-0/+4
Selftests are supposed to run on any kernels, including the old ones not supporting MPTCP. A new check is then added to make sure MPTCP is supported. If not, the test stops and is marked as "skipped". Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 259a834fadda ("selftests: mptcp: functional tests for the userspace PM type") Cc: stable@vger.kernel.org Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-05-30selftests: mptcp: sockopt: skip if MPTCP is not supportedMatthieu Baerts1-0/+4
Selftests are supposed to run on any kernels, including the old ones not supporting MPTCP. A new check is then added to make sure MPTCP is supported. If not, the test stops and is marked as "skipped". Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: dc65fe82fb07 ("selftests: mptcp: add packet mark test case") Cc: stable@vger.kernel.org Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-05-30selftests: mptcp: simult flows: skip if MPTCP is not supportedMatthieu Baerts1-0/+4
Selftests are supposed to run on any kernels, including the old ones not supporting MPTCP. A new check is then added to make sure MPTCP is supported. If not, the test stops and is marked as "skipped". Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 1a418cb8e888 ("mptcp: simult flow self-tests") Cc: stable@vger.kernel.org Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-05-30selftests: mptcp: diag: skip if MPTCP is not supportedMatthieu Baerts1-0/+4
Selftests are supposed to run on any kernels, including the old ones not supporting MPTCP. A new check is then added to make sure MPTCP is supported. If not, the test stops and is marked as "skipped". Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: df62f2ec3df6 ("selftests/mptcp: add diag interface tests") Cc: stable@vger.kernel.org Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-05-30selftests: mptcp: join: skip if MPTCP is not supportedMatthieu Baerts1-0/+4
Selftests are supposed to run on any kernels, including the old ones not supporting MPTCP. A new check is then added to make sure MPTCP is supported. If not, the test stops and is marked as "skipped". Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: b08fbf241064 ("selftests: add test-cases for MPTCP MP_JOIN") Cc: stable@vger.kernel.org Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-05-30selftests: mptcp: pm nl: skip if MPTCP is not supportedMatthieu Baerts1-0/+4
Selftests are supposed to run on any kernels, including the old ones not supporting MPTCP. A new check is then added to make sure MPTCP is supported. If not, the test stops and is marked as "skipped". Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: eedbc685321b ("selftests: add PM netlink functional tests") Cc: stable@vger.kernel.org Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-05-30selftests: mptcp: connect: skip if MPTCP is not supportedMatthieu Baerts3-1/+45
Selftests are supposed to run on any kernels, including the old ones not supporting MPTCP. A new check is then added to make sure MPTCP is supported. If not, the test stops and is marked as "skipped". Note that this check can also mark the test as failed if 'SELFTESTS_MPTCP_LIB_EXPECT_ALL_FEATURES' env var is set to 1: by doing that, we can make sure a test is not being skipped by mistake. A new shared file is added here to be able to re-used the same check in the different selftests we have. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 048d19d444be ("mptcp: add basic kselftest for mptcp") Cc: stable@vger.kernel.org Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-05-30selftests: mptcp: join: avoid using 'cmp --bytes'Matthieu Baerts1-2/+11
BusyBox's 'cmp' command doesn't support the '--bytes' parameter. Some CIs -- i.e. LKFT -- use BusyBox and have the mptcp_join.sh test failing [1] because their 'cmp' command doesn't support this '--bytes' option: cmp: unrecognized option '--bytes=1024' BusyBox v1.35.0 () multi-call binary. Usage: cmp [-ls] [-n NUM] FILE1 [FILE2] Instead, 'head --bytes' can be used as this option is supported by BusyBox. A temporary file is needed for this operation. Because it is apparently quite common to use BusyBox, it is certainly better to backport this fix to impacted kernels. Fixes: 6bf41020b72b ("selftests: mptcp: update and extend fastclose test-cases") Cc: stable@vger.kernel.org Link: https://qa-reports.linaro.org/lkft/linux-mainline-master/build/v6.3-rc5-5-g148341f0a2f5/testrun/16088933/suite/kselftest-net-mptcp/test/net_mptcp_userspace_pm_sh/log [1] Suggested-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-05-29Merge tag 'trace-v6.4-rc3' of ↵Linus Torvalds2-3/+26
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing fixes from Steven Rostedt: "User events: - Use long instead of int for storing the enable set/clear bit, as it was found that big endian machines could end up using the wrong bits. - Split allocating mm and attaching it. This keeps the allocation separate from the registration and avoids various races. - Remove RCU locking around pin_user_pages_remote() as that can schedule. The RCU protection is no longer needed with the above split of mm allocation and attaching. - Rename the "link" fields of the various structs to something more meaningful. - Add comments around user_event_mm struct usage and locking requirements. Timerlat tracer: - Fix missed wakeup of timerlat thread caused by the timerlat interrupt triggering when tracing is off. The timer interrupt handler needs to always wake up the timerlat thread regardless if tracing is enabled or not, otherwise, it will never wake up. Histograms: - Fix regression of breaking the "stacktrace" modifier for variables. That modifier cannot be used for values, but can be used for variables that are passed from one histogram to the next. This was broken when adding the restriction to values as the variable logic used the same code. - Rename the special field "stacktrace" to "common_stacktrace". Special fields (that are not actually part of the event, but can act just like event fields, like 'comm' and 'timestamp') should be prefixed with 'common_' for consistency. To keep backward compatibility, 'stacktrace' can still be used (as with the special field 'cpu'), but can be overridden if the event has a field called 'stacktrace'. - Update the synthetic event selftests to use the new name (synthetic events are created by histograms) Tracing bootup selftests: - Reorganize the code to keep artifacts of the selftests not compiled in when selftests are not configured. - Add various cond_resched() around the selftest code, as the softlock watchdog was triggering much more often. It appears that the kernel runs slower now with full debugging enabled. - While debugging ftrace with ftrace (using an instance ring buffer instead of the top level one), I found that the selftests were disabling prints to the debug instance. This should not happen, as the selftests only disable printing to the main buffer as the selftests examine the main buffer to see if it has what it expects, and prints can make the tests fail. Make the selftests only disable printing to the toplevel buffer, and leave the instance buffers alone" * tag 'trace-v6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing: Have function_graph selftest call cond_resched() tracing: Only make selftest conditionals affect the global_trace tracing: Make tracing_selftest_running/delete nops when not used tracing: Have tracer selftests call cond_resched() before running tracing: Move setting of tracing_selftest_running out of register_tracer() tracing/selftests: Update synthetic event selftest to use common_stacktrace tracing: Rename stacktrace field to common_stacktrace tracing/histograms: Allow variables to have some modifiers tracing/user_events: Document user_event_mm one-shot list usage tracing/user_events: Rename link fields for clarity tracing/user_events: Remove RCU lock while pinning pages tracing/user_events: Split up mm alloc and attach tracing/timerlat: Always wakeup the timerlat thread tracing/user_events: Use long vs int for atomic bit ops
2023-05-27Merge tag 'cxl-fixes-6.4-rc4' of ↵Linus Torvalds3-0/+17
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl Pull compute express link fixes from Dan Williams: "The 'media ready' series prevents the driver from acting on bad capacity information, and it moves some checks earlier in the init sequence which impacts topics in the queue for 6.5. Additional hotplug testing uncovered a missing enable for memory decode. A debug crash fix is also included. Summary: - Stop trusting capacity data before the "media ready" indication - Add missing HDM decoder capability enable for the cold-plug case - Fix a debug message induced crash" * tag 'cxl-fixes-6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: cxl: Explicitly initialize resources when media is not ready cxl/port: Fix NULL pointer access in devm_cxl_add_port() cxl: Move cxl_await_media_ready() to before capacity info retrieval cxl: Wait Memory_Info_Valid before access memory related info cxl/port: Enable the HDM decoder capability for switch ports
2023-05-26Merge tag 'gpio-fixes-for-v6.4-rc4' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fixes from Bartosz Golaszewski: - fix incorrect output in in-tree gpio tools - fix a shell coding issue in gpio-sim selftests - correctly set the permissions for debugfs attributes exposed by gpio-mockup - fix chip name and pin count in gpio-f7188x for one of the supported models - fix numberspace pollution when using dynamically and statically allocated GPIOs together * tag 'gpio-fixes-for-v6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpio-f7188x: fix chip name and pin count on Nuvoton chip gpiolib: fix allocation of mixed dynamic/static GPIOs gpio: mockup: Fix mode of debugfs files selftests: gpio: gpio-sim: Fix BUG: test FAILED due to recent change tools: gpio: fix debounce_period_us output of lsgpio
2023-05-25Merge tag 'for-netdev' of ↵Jakub Kicinski7-372/+597
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Daniel Borkmann says: ==================== pull-request: bpf 2023-05-24 We've added 19 non-merge commits during the last 10 day(s) which contain a total of 20 files changed, 738 insertions(+), 448 deletions(-). The main changes are: 1) Batch of BPF sockmap fixes found when running against NGINX TCP tests, from John Fastabend. 2) Fix a memleak in the LRU{,_PERCPU} hash map when bucket locking fails, from Anton Protopopov. 3) Init the BPF offload table earlier than just late_initcall, from Jakub Kicinski. 4) Fix ctx access mask generation for 32-bit narrow loads of 64-bit fields, from Will Deacon. 5) Remove a now unsupported __fallthrough in BPF samples, from Andrii Nakryiko. 6) Fix a typo in pkg-config call for building sign-file, from Jeremy Sowden. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf, sockmap: Test progs verifier error with latest clang bpf, sockmap: Test FIONREAD returns correct bytes in rx buffer with drops bpf, sockmap: Test FIONREAD returns correct bytes in rx buffer bpf, sockmap: Test shutdown() correctly exits epoll and recv()=0 bpf, sockmap: Build helper to create connected socket pair bpf, sockmap: Pull socket helpers out of listen test for general use bpf, sockmap: Incorrectly handling copied_seq bpf, sockmap: Wake up polling after data copy bpf, sockmap: TCP data stall on recv before accept bpf, sockmap: Handle fin correctly bpf, sockmap: Improved check for empty queue bpf, sockmap: Reschedule is now done through backlog bpf, sockmap: Convert schedule_work into delayed_work bpf, sockmap: Pass skb ownership through read_skb bpf: fix a memory leak in the LRU and LRU_PERCPU hash maps bpf: Fix mask generation for 32-bit narrow loads of 64-bit fields samples/bpf: Drop unnecessary fallthrough bpf: netdev: init the offload table earlier selftests/bpf: Fix pkg-config call building sign-file ==================== Link: https://lore.kernel.org/r/20230524170839.13905-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-24tracing/selftests: Update synthetic event selftest to use common_stacktraceSteven Rostedt (Google)2-3/+26
With the rename of the stacktrace field to common_stacktrace, update the selftests to reflect this change. Copy the current selftest to test the backward compatibility "stacktrace" keyword. Also the "requires" of that test was incorrect, so it would never actually ran before. That is fixed now. Link: https://lore.kernel.org/linux-trace-kernel/20230523225402.55951f2f@rorschach.local.home Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Tom Zanussi <zanussi@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-05-23bpf, sockmap: Test progs verifier error with latest clangJohn Fastabend1-7/+5
With a relatively recent clang (7090c10273119) and with this commit to fix warnings in selftests (c8ed668593972) that uses __sink(err) to resolve unused variables. We get the following verifier error. root@6e731a24b33a:/host/tools/testing/selftests/bpf# ./test_sockmap libbpf: prog 'bpf_sockmap': BPF program load failed: Permission denied libbpf: prog 'bpf_sockmap': -- BEGIN PROG LOAD LOG -- 0: R1=ctx(off=0,imm=0) R10=fp0 ; op = (int) skops->op; 0: (61) r2 = *(u32 *)(r1 +0) ; R1=ctx(off=0,imm=0) R2_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff)) ; switch (op) { 1: (16) if w2 == 0x4 goto pc+5 ; R2_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff)) 2: (56) if w2 != 0x5 goto pc+15 ; R2_w=5 ; lport = skops->local_port; 3: (61) r2 = *(u32 *)(r1 +68) ; R1=ctx(off=0,imm=0) R2_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff)) ; if (lport == 10000) { 4: (56) if w2 != 0x2710 goto pc+13 18: R1=ctx(off=0,imm=0) R2=scalar(umax=4294967295,var_off=(0x0; 0xffffffff)) R10=fp0 ; __sink(err); 18: (bc) w1 = w0 R0 !read_ok processed 18 insns (limit 1000000) max_states_per_insn 0 total_states 2 peak_states 2 mark_read 1 -- END PROG LOAD LOG -- libbpf: prog 'bpf_sockmap': failed to load: -13 libbpf: failed to load object 'test_sockmap_kern.bpf.o' load_bpf_file: (-1) No such file or directory ERROR: (-1) load bpf failed libbpf: prog 'bpf_sockmap': BPF program load failed: Permission denied libbpf: prog 'bpf_sockmap': -- BEGIN PROG LOAD LOG -- 0: R1=ctx(off=0,imm=0) R10=fp0 ; op = (int) skops->op; 0: (61) r2 = *(u32 *)(r1 +0) ; R1=ctx(off=0,imm=0) R2_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff)) ; switch (op) { 1: (16) if w2 == 0x4 goto pc+5 ; R2_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff)) 2: (56) if w2 != 0x5 goto pc+15 ; R2_w=5 ; lport = skops->local_port; 3: (61) r2 = *(u32 *)(r1 +68) ; R1=ctx(off=0,imm=0) R2_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff)) ; if (lport == 10000) { 4: (56) if w2 != 0x2710 goto pc+13 18: R1=ctx(off=0,imm=0) R2=scalar(umax=4294967295,var_off=(0x0; 0xffffffff)) R10=fp0 ; __sink(err); 18: (bc) w1 = w0 R0 !read_ok processed 18 insns (limit 1000000) max_states_per_insn 0 total_states 2 peak_states 2 mark_read 1 -- END PROG LOAD LOG -- libbpf: prog 'bpf_sockmap': failed to load: -13 libbpf: failed to load object 'test_sockhash_kern.bpf.o' load_bpf_file: (-1) No such file or directory ERROR: (-1) load bpf failed libbpf: prog 'bpf_sockmap': BPF program load failed: Permission denied libbpf: prog 'bpf_sockmap': -- BEGIN PROG LOAD LOG -- 0: R1=ctx(off=0,imm=0) R10=fp0 ; op = (int) skops->op; 0: (61) r2 = *(u32 *)(r1 +0) ; R1=ctx(off=0,imm=0) R2_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff)) ; switch (op) { 1: (16) if w2 == 0x4 goto pc+5 ; R2_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff)) 2: (56) if w2 != 0x5 goto pc+15 ; R2_w=5 ; lport = skops->local_port; 3: (61) r2 = *(u32 *)(r1 +68) ; R1=ctx(off=0,imm=0) R2_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff)) ; if (lport == 10000) { 4: (56) if w2 != 0x2710 goto pc+13 18: R1=ctx(off=0,imm=0) R2=scalar(umax=4294967295,var_off=(0x0; 0xffffffff)) R10=fp0 ; __sink(err); 18: (bc) w1 = w0 R0 !read_ok processed 18 insns (limit 1000000) max_states_per_insn 0 total_states 2 peak_states 2 mark_read 1 -- END PROG LOAD LOG -- To fix simply remove the err value because its not actually used anywhere in the testing. We can investigate the root cause later. Future patch should probably actually test the err value as well. Although if the map updates fail they will get caught eventually by userspace. Fixes: c8ed668593972 ("selftests/bpf: fix lots of silly mistakes pointed out by compiler") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/20230523025618.113937-15-john.fastabend@gmail.com
2023-05-23bpf, sockmap: Test FIONREAD returns correct bytes in rx buffer with dropsJohn Fastabend2-13/+66
When BPF program drops pkts the sockmap logic 'eats' the packet and updates copied_seq. In the PASS case where the sk_buff is accepted we update copied_seq from recvmsg path so we need a new test to handle the drop case. Original patch series broke this resulting in test_sockmap_skb_verdict_fionread:PASS:ioctl(FIONREAD) error 0 nsec test_sockmap_skb_verdict_fionread:FAIL:ioctl(FIONREAD) unexpected ioctl(FIONREAD): actual 1503041772 != expected 256 After updated patch with fix. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/20230523025618.113937-14-john.fastabend@gmail.com
2023-05-23bpf, sockmap: Test FIONREAD returns correct bytes in rx bufferJohn Fastabend1-0/+48
A bug was reported where ioctl(FIONREAD) returned zero even though the socket with a SK_SKB verdict program attached had bytes in the msg queue. The result is programs may hang or more likely try to recover, but use suboptimal buffer sizes. Add a test to check that ioctl(FIONREAD) returns the correct number of bytes. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/20230523025618.113937-13-john.fastabend@gmail.com
2023-05-23bpf, sockmap: Test shutdown() correctly exits epoll and recv()=0John Fastabend2-0/+94
When session gracefully shutdowns epoll needs to wake up and any recv() readers should return 0 not the -EAGAIN they previously returned. Note we use epoll instead of select to test the epoll wake on shutdown event as well. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/20230523025618.113937-12-john.fastabend@gmail.com
2023-05-23bpf, sockmap: Build helper to create connected socket pairJohn Fastabend2-102/+123
A common operation for testing is to spin up a pair of sockets that are connected. Then we can use these to run specific tests that need to send data, check BPF programs and so on. The sockmap_listen programs already have this logic lets move it into the new sockmap_helpers header file for general use. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/20230523025618.113937-11-john.fastabend@gmail.com
2023-05-23bpf, sockmap: Pull socket helpers out of listen test for general useJohn Fastabend2-262/+273
No functional change here we merely pull the helpers in sockmap_listen.c into a header file so we can use these in other programs. The tests we are about to add aren't really _listen tests so doesn't make sense to add them here. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/20230523025618.113937-10-john.fastabend@gmail.com
2023-05-19selftests: fib_tests: mute cleanup error messagePo-Hsu Lin1-1/+1
In the end of the test, there will be an error message induced by the `ip netns del ns1` command in cleanup() Tests passed: 201 Tests failed: 0 Cannot remove namespace file "/run/netns/ns1": No such file or directory This can even be reproduced with just `./fib_tests.sh -h` as we're calling cleanup() on exit. Redirect the error message to /dev/null to mute it. V2: Update commit message and fixes tag. V3: resubmit due to missing netdev ML in V2 Fixes: b60417a9f2b8 ("selftest: fib_tests: Always cleanup before exit") Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-19cxl: Move cxl_await_media_ready() to before capacity info retrievalDave Jiang1-0/+1
Move cxl_await_media_ready() to cxl_pci probe before driver starts issuing IDENTIFY and retrieving memory device information to ensure that the device is ready to provide the information. Allow cxl_pci_probe() to succeed even if media is not ready. Cache the media failure in cxlds and don't ask the device for any media information. The rationale for proceeding in the !media_ready case is to allow for mailbox operations to interrogate and/or remediate the device. After media is repaired then rebinding the cxl_pci driver is expected to restart the capacity scan. Suggested-by: Dan Williams <dan.j.williams@intel.com> Fixes: b39cb1052a5c ("cxl/mem: Register CXL memX devices") Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/168445310026.3251520.8124296540679268206.stgit@djiang5-mobl3 [djbw: fixup cxl_test] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-05-18cxl/port: Enable the HDM decoder capability for switch portsDan Williams2-0/+16
Derick noticed, when testing hot plug, that hot-add behaves nominally after a removal. However, if the hot-add is done without a prior removal, CXL.mem accesses fail. It turns out that the original implementation of the port driver and region programming wrongly assumed that platform-firmware always enables the host-bridge HDM decoder capability. Add support turning on switch-level HDM decoders in the case where platform-firmware has not. The implementation is careful to only arrange for the enable to be undone if the current instance of the driver was the one that did the enable. This is to interoperate with platform-firmware that may expect CXL.mem to remain active after the driver is shutdown. This comes at the cost of potentially not shutting down the enable on kexec flows, but it is mitigated by the fact that the related HDM decoders still need to be enabled on an individual basis. Cc: <stable@vger.kernel.org> Reported-by: Derick Marks <derick.w.marks@intel.com> Fixes: 54cdbf845cf7 ("cxl/port: Add a driver for 'struct cxl_port' objects") Reviewed-by: Ira Weiny <ira.weiny@intel.com> Link: https://lore.kernel.org/r/168437998331.403037.15719879757678389217.stgit@dwillia2-xfh.jf.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-05-18Merge tag 'net-6.4-rc3' of ↵Linus Torvalds2-7/+12
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from can, xfrm, bluetooth and netfilter. Current release - regressions: - ipv6: fix RCU splat in ipv6_route_seq_show() - wifi: iwlwifi: disable RFI feature Previous releases - regressions: - tcp: fix possible sk_priority leak in tcp_v4_send_reset() - tipc: do not update mtu if msg_max is too small in mtu negotiation - netfilter: fix null deref on element insertion - devlink: change per-devlink netdev notifier to static one - phylink: fix ksettings_set() ethtool call - wifi: mac80211: fortify the spinlock against deadlock by interrupt - wifi: brcmfmac: check for probe() id argument being NULL - eth: ice: - fix undersized tx_flags variable - fix ice VF reset during iavf initialization - eth: hns3: fix sending pfc frames after reset issue Previous releases - always broken: - xfrm: release all offloaded policy memory - nsh: use correct mac_offset to unwind gso skb in nsh_gso_segment() - vsock: avoid to close connected socket after the timeout - dsa: rzn1-a5psw: enable management frames for CPU port - eth: virtio_net: fix error unwinding of XDP initialization - eth: tun: fix memory leak for detached NAPI queue. Misc: - MAINTAINERS: sctp: move Neil to CREDITS" * tag 'net-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (107 commits) MAINTAINERS: skip CCing netdev for Bluetooth patches mdio_bus: unhide mdio_bus_init prototype bridge: always declare tunnel functions atm: hide unused procfs functions net: isa: include net/Space.h Revert "ARM: dts: stm32: add CAN support on stm32f746" netfilter: nft_set_rbtree: fix null deref on element insertion netfilter: nf_tables: fix nft_trans type confusion netfilter: conntrack: define variables exp_nat_nla_policy and any_addr with CONFIG_NF_NAT net: wwan: t7xx: Ensure init is completed before system sleep net: selftests: Fix optstring net: pcs: xpcs: fix C73 AN not getting enabled net: wwan: iosm: fix NULL pointer dereference when removing device vlan: fix a potential uninit-value in vlan_dev_hard_start_xmit() mailmap: add entries for Nikolay Aleksandrov igb: fix bit_shift to be in [1..8] range net: dsa: mv88e6xxx: Fix mv88e6393x EPC write command offset cassini: Fix a memory leak in the error handling path of cas_init_one() tun: Fix memory leak for detached NAPI queue. can: kvaser_pciefd: Disable interrupts in probe error path ...
2023-05-17Merge tag 'linux-kselftest-fixes-6.4-rc3' of ↵Linus Torvalds4-4/+71
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest fixes from Shuah Khan: - sgx test fix for false negatives - ftrace output is hard to parses and it masks inappropriate skips etc. This fix addresses the problems by integrating with kselftest runner * tag 'linux-kselftest-fixes-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests/ftrace: Improve integration with kselftest runner selftests/sgx: Add "test_encl.elf" to TEST_FILES
2023-05-17net: selftests: Fix optstringBenjamin Poirier1-1/+1
The cited commit added a stray colon to the 'v' option. That makes the option work incorrectly. ex: tools/testing/selftests/net# ./fib_nexthops.sh -v (should enable verbose mode, instead it shows help text due to missing arg) Fixes: 5feba4727395 ("selftests: fib_nexthops: Make ping timeout configurable") Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-15selftests/bpf: Fix pkg-config call building sign-fileJeremy Sowden1-1/+1
When building sign-file, the call to get the CFLAGS for libcrypto is missing white-space between `pkg-config` and `--cflags`: $(shell $(HOSTPKG_CONFIG)--cflags libcrypto 2> /dev/null) Removing the redirection of stderr, we see: $ make -C tools/testing/selftests/bpf sign-file make: Entering directory '[...]/tools/testing/selftests/bpf' make: pkg-config--cflags: No such file or directory SIGN-FILE sign-file make: Leaving directory '[...]/tools/testing/selftests/bpf' Add the missing space. Fixes: fc97590668ae ("selftests/bpf: Add test for bpf_verify_pkcs7_signature() kfunc") Signed-off-by: Jeremy Sowden <jeremy@azazel.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com> Link: https://lore.kernel.org/bpf/20230426215032.415792-1-jeremy@azazel.net Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-05-14Merge tag 'cxl-fixes-6.4-rc2' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl Pull compute express link fixes from Dan Williams: - Fix a compilation issue with DEFINE_STATIC_SRCU() in the unit tests - Fix leaking kernel memory to a root-only sysfs attribute * tag 'cxl-fixes-6.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: cxl: Add missing return to cdat read error path tools/testing/cxl: Use DEFINE_STATIC_SRCU()
2023-05-13tools/testing/cxl: Use DEFINE_STATIC_SRCU()Dan Williams1-1/+1
Starting with commit: 95433f726301 ("srcu: Begin offloading srcu_struct fields to srcu_update") ...it is no longer possible to do: static DEFINE_SRCU(x) Switch to DEFINE_STATIC_SRCU(x) to fix: tools/testing/cxl/test/mock.c:22:1: error: duplicate ‘static’ 22 | static DEFINE_SRCU(cxl_mock_srcu); | ^~~~~~ Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/168392709546.1135523.10424917245934547117.stgit@dwillia2-xfh.jf.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-05-12selftets: seg6: disable rp_filter by default in srv6_end_dt4_l3vpn_testAndrea Mayer1-5/+6
On some distributions, the rp_filter is automatically set (=1) by default on a netdev basis (also on VRFs). In an SRv6 End.DT4 behavior, decapsulated IPv4 packets are routed using the table associated with the VRF bound to that tunnel. During lookup operations, the rp_filter can lead to packet loss when activated on the VRF. Therefore, we chose to make this selftest more robust by explicitly disabling the rp_filter during tests (as it is automatically set by some Linux distributions). Fixes: 2195444e09b4 ("selftests: add selftest for the SRv6 End.DT4 behavior") Reported-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it> Tested-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-12selftests: seg6: disable DAD on IPv6 router cfg for srv6_end_dt4_l3vpn_testAndrea Mayer1-1/+5
The srv6_end_dt4_l3vpn_test instantiates a virtual network consisting of several routers (rt-1, rt-2) and hosts. When the IPv6 addresses of rt-{1,2} routers are configured, the Deduplicate Address Detection (DAD) kicks in when enabled in the Linux distros running the selftests. DAD is used to check whether an IPv6 address is already assigned in a network. Such a mechanism consists of sending an ICMPv6 Echo Request and waiting for a reply. As the DAD process could take too long to complete, it may cause the failing of some tests carried out by the srv6_end_dt4_l3vpn_test script. To make the srv6_end_dt4_l3vpn_test more robust, we disable DAD on routers since we configure the virtual network manually and do not need any address deduplication mechanism at all. Fixes: 2195444e09b4 ("selftests: add selftest for the SRv6 End.DT4 behavior") Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-11Merge tag 'net-6.4-rc2' of ↵Linus Torvalds4-7/+193
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from netfilter. Current release - regressions: - mtk_eth_soc: fix NULL pointer dereference Previous releases - regressions: - core: - skb_partial_csum_set() fix against transport header magic value - fix load-tearing on sk->sk_stamp in sock_recv_cmsgs(). - annotate sk->sk_err write from do_recvmmsg() - add vlan_get_protocol_and_depth() helper - netlink: annotate accesses to nlk->cb_running - netfilter: always release netdev hooks from notifier Previous releases - always broken: - core: deal with most data-races in sk_wait_event() - netfilter: fix possible bug_on with enable_hooks=1 - eth: bonding: fix send_peer_notif overflow - eth: xpcs: fix incorrect number of interfaces - eth: ipvlan: fix out-of-bounds caused by unclear skb->cb - eth: stmmac: Initialize MAC_ONEUS_TIC_COUNTER register" * tag 'net-6.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (31 commits) af_unix: Fix data races around sk->sk_shutdown. af_unix: Fix a data race of sk->sk_receive_queue->qlen. net: datagram: fix data-races in datagram_poll() net: mscc: ocelot: fix stat counter register values ipvlan:Fix out-of-bounds caused by unclear skb->cb docs: networking: fix x25-iface.rst heading & index order gve: Remove the code of clearing PBA bit tcp: add annotations around sk->sk_shutdown accesses net: add vlan_get_protocol_and_depth() helper net: pcs: xpcs: fix incorrect number of interfaces net: deal with most data-races in sk_wait_event() net: annotate sk->sk_err write from do_recvmmsg() netlink: annotate accesses to nlk->cb_running kselftest: bonding: add num_grat_arp test selftests: forwarding: lib: add netns support for tc rule handle stats get Documentation: bonding: fix the doc of peer_notif_delay bonding: fix send_peer_notif overflow net: ethernet: mtk_eth_soc: fix NULL pointer dereference selftests: nft_flowtable.sh: check ingress/egress chain too selftests: nft_flowtable.sh: monitor result file sizes ...
2023-05-11selftests: gpio: gpio-sim: Fix BUG: test FAILED due to recent changeMirsad Todorovac1-0/+3
According to Mirsad the gpio-sim.sh test appears to FAIL in a wrong way due to missing initialisation of shell variables: 4.2. Bias settings work correctly cat: /sys/devices/platform/gpio-sim.0/gpiochip18/sim_gpio0/value: No such file or directory ./gpio-sim.sh: line 393: test: =: unary operator expected bias setting does not work GPIO gpio-sim test FAIL After this change the test passed: 4.2. Bias settings work correctly GPIO gpio-sim test PASS His testing environment is AlmaLinux 8.7 on Lenovo desktop box with the latest Linux kernel based on v6.2: Linux 6.2.0-mglru-kmlk-andy-09238-gd2980d8d8265 x86_64 Suggested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr> Signed-off-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-05-11Merge tag 'nf-23-05-10' of ↵Jakub Kicinski1-6/+139
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter updates for net The following patchset contains Netfilter fixes for net: 1) Fix UAF when releasing netnamespace, from Florian Westphal. 2) Fix possible BUG_ON when nf_conntrack is enabled with enable_hooks, from Florian Westphal. 3) Fixes for nft_flowtable.sh selftest, from Boris Sukholitko. 4) Extend nft_flowtable.sh selftest to cover integration with ingress/egress hooks, from Florian Westphal. * tag 'nf-23-05-10' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: selftests: nft_flowtable.sh: check ingress/egress chain too selftests: nft_flowtable.sh: monitor result file sizes selftests: nft_flowtable.sh: wait for specific nc pids selftests: nft_flowtable.sh: no need for ps -x option selftests: nft_flowtable.sh: use /proc for pid checking netfilter: conntrack: fix possible bug_on with enable_hooks=1 netfilter: nf_tables: always release netdev hooks from notifier ==================== Link: https://lore.kernel.org/r/20230510083313.152961-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-10kselftest: bonding: add num_grat_arp testHangbin Liu2-0/+52
TEST: num_grat_arp (active-backup miimon num_grat_arp 10) [ OK ] TEST: num_grat_arp (active-backup miimon num_grat_arp 20) [ OK ] TEST: num_grat_arp (active-backup miimon num_grat_arp 30) [ OK ] TEST: num_grat_arp (active-backup miimon num_grat_arp 50) [ OK ] Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-10selftests: forwarding: lib: add netns support for tc rule handle stats getHangbin Liu1-1/+2
When run the test in netns, it's not easy to get the tc stats via tc_rule_handle_stats_get(). With the new netns parameter, we can get stats from specific netns like num=$(tc_rule_handle_stats_get "dev eth0 ingress" 101 ".packets" "-n ns") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-10selftests: nft_flowtable.sh: check ingress/egress chain tooFlorian Westphal1-0/+124
Make sure flowtable interacts correctly with ingress and egress chains, i.e. those get handled before and after flow table respectively. Adds three more tests: 1. repeat flowtable test, but with 'ip dscp set cs3' done in inet forward chain. Expect that some packets have been mangled (before flowtable offload became effective) while some pass without mangling (after offload succeeds). 2. repeat flowtable test, but with 'ip dscp set cs3' done in veth0:ingress. Expect that all packets pass with cs3 dscp field. 3. same as 2, but use veth1:egress. Expect the same outcome. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2023-05-10selftests: nft_flowtable.sh: monitor result file sizesBoris Sukholitko1-1/+9
When running nft_flowtable.sh in VM on a busy server we've found that the time of the netcat file transfers vary wildly. Therefore replace hardcoded 3 second sleep with the loop checking for a change in the file sizes. Once no change in detected we test the results. Nice side effect is that we shave 1 second sleep in the fast case (hard-coded 3 second sleep vs two 1 second sleeps). Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2023-05-10selftests: nft_flowtable.sh: wait for specific nc pidsBoris Sukholitko1-1/+2
Doing wait with no parameters may interfere with some of the tests having their own background processes. Although no such test is currently present, the cleanup is useful to rely on the nft_flowtable.sh for local development (e.g. running background tcpdump command during the tests). Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2023-05-10selftests: nft_flowtable.sh: no need for ps -x optionBoris Sukholitko1-2/+2
Some ps commands (e.g. busybox derived) have no -x option. For the purposes of hash calculation of the list of processes this option is inessential. Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2023-05-10selftests: nft_flowtable.sh: use /proc for pid checkingBoris Sukholitko1-2/+2
Some ps commands (e.g. busybox derived) have no -p option. Use /proc for pid existence check. Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2023-05-08selftests/ftrace: Improve integration with kselftest runnerMark Brown3-4/+70
The ftrace selftests do not currently produce KTAP output, they produce a custom format much nicer for human consumption. This means that when run in automated test systems we just get a single result for the suite as a whole rather than recording results for individual test cases, making it harder to look at the test data and masking things like inappropriate skips. Address this by adding support for KTAP output to the ftracetest script and providing a trivial wrapper which will be invoked by the kselftest runner to generate output in this format by default, users using ftracetest directly will continue to get the existing output. This is not the most elegant solution but it is simple and effective. I did consider implementing this by post processing the existing output format but that felt more complex and likely to result in all output being lost if something goes seriously wrong during the run which would not be helpful. I did also consider just writing a separate runner script but there's enough going on with things like the signal handling for that to seem like it would be duplicating too much. Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Tested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-05-08selftests/sgx: Add "test_encl.elf" to TEST_FILESYi Lai1-0/+1
The "test_encl.elf" file used by test_sgx is not installed in INSTALL_PATH. Attempting to execute test_sgx causes false negative: " enclave executable open(): No such file or directory main.c:188:unclobbered_vdso:Failed to load the test enclave. " Add "test_encl.elf" to TEST_FILES so that it will be installed. Fixes: 2adcba79e69d ("selftests/x86: Add a selftest for SGX") Signed-off-by: Yi Lai <yi1.lai@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-05-07Merge tag 'perf-tools-for-v6.4-3-2023-05-06' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tool updates from Arnaldo Carvalho de Melo: "Third version of perf tool updates, with the build problems with with using a 'vmlinux.h' generated from the main build fixed, and the bpf skeleton build disabled by default. Build: - Require libtraceevent to build, one can disable it using NO_LIBTRACEEVENT=1. It is required for tools like 'perf sched', 'perf kvm', 'perf trace', etc. libtraceevent is available in most distros so installing 'libtraceevent-devel' should be a one-time event to continue building perf as usual. Using NO_LIBTRACEEVENT=1 produces tooling that is functional and sufficient for lots of users not interested in those libtraceevent dependent features. - Allow Python support in 'perf script' when libtraceevent isn't linked, as not all features requires it, for instance Intel PT does not use tracepoints. - Error if the python interpreter needed for jevents to work isn't available and NO_JEVENTS=1 isn't set, preventing a build without support for JSON vendor events, which is a rare but possible condition. The two check error messages: $(error ERROR: No python interpreter needed for jevents generation. Install python or build with NO_JEVENTS=1.) $(error ERROR: Python interpreter needed for jevents generation too old (older than 3.6). Install a newer python or build with NO_JEVENTS=1.) - Make libbpf 1.0 the minimum required when building with out of tree, distro provided libbpf. - Use libsdtc++'s and LLVM's libcxx's __cxa_demangle, a portable C++ demangler, add 'perf test' entry for it. - Make binutils libraries opt in, as distros disable building with it due to licensing, they were used for C++ demangling, for instance. - Switch libpfm4 to opt-out rather than opt-in, if libpfm-devel (or equivalent) isn't installed, we'll just have a build warning: Makefile.config:1144: libpfm4 not found, disables libpfm4 support. Please install libpfm4-dev - Add a feature test for scandirat(), that is not implemented so far in musl and uclibc, disabling features that need it, such as scanning for tracepoints in /sys/kernel/tracing/events. perf BPF filters: - New feature where BPF can be used to filter samples, for instance: $ sudo ./perf record -e cycles --filter 'period > 1000' true $ sudo ./perf script perf-exec 2273949 546850.708501: 5029 cycles: ffffffff826f9e25 finish_wait+0x5 ([kernel.kallsyms]) perf-exec 2273949 546850.708508: 32409 cycles: ffffffff826f9e25 finish_wait+0x5 ([kernel.kallsyms]) perf-exec 2273949 546850.708526: 143369 cycles: ffffffff82b4cdbf xas_start+0x5f ([kernel.kallsyms]) perf-exec 2273949 546850.708600: 372650 cycles: ffffffff8286b8f7 __pagevec_lru_add+0x117 ([kernel.kallsyms]) perf-exec 2273949 546850.708791: 482953 cycles: ffffffff829190de __mod_memcg_lruvec_state+0x4e ([kernel.kallsyms]) true 2273949 546850.709036: 501985 cycles: ffffffff828add7c tlb_gather_mmu+0x4c ([kernel.kallsyms]) true 2273949 546850.709292: 503065 cycles: 7f2446d97c03 _dl_map_object_deps+0x973 (/usr/lib/x86_64-linux-gnu/ld-linux-x86-64.so.2) - In addition to 'period' (PERF_SAMPLE_PERIOD), the other PERF_SAMPLE_ can be used for filtering, and also some other sample accessible values, from tools/perf/Documentation/perf-record.txt: Essentially the BPF filter expression is: <term> <operator> <value> (("," | "||") <term> <operator> <value>)* The <term> can be one of: ip, id, tid, pid, cpu, time, addr, period, txn, weight, phys_addr, code_pgsz, data_pgsz, weight1, weight2, weight3, ins_lat, retire_lat, p_stage_cyc, mem_op, mem_lvl, mem_snoop, mem_remote, mem_lock, mem_dtlb, mem_blk, mem_hops The <operator> can be one of: ==, !=, >, >=, <, <=, & The <value> can be one of: <number> (for any term) na, load, store, pfetch, exec (for mem_op) l1, l2, l3, l4, cxl, io, any_cache, lfb, ram, pmem (for mem_lvl) na, none, hit, miss, hitm, fwd, peer (for mem_snoop) remote (for mem_remote) na, locked (for mem_locked) na, l1_hit, l1_miss, l2_hit, l2_miss, any_hit, any_miss, walk, fault (for mem_dtlb) na, by_data, by_addr (for mem_blk) hops0, hops1, hops2, hops3 (for mem_hops) perf lock contention: - Show lock type with address. - Track and show mmap_lock, siglock and per-cpu rq_lock with address. This is done for mmap_lock by following the current->mm pointer: $ sudo ./perf lock con -abl -- sleep 10 contended total wait max wait avg wait address symbol ... 16344 312.30 ms 2.22 ms 19.11 us ffff8cc702595640 17686 310.08 ms 1.49 ms 17.53 us ffff8cc7025952c0 3 84.14 ms 45.79 ms 28.05 ms ffff8cc78114c478 mmap_lock 3557 76.80 ms 68.75 us 21.59 us ffff8cc77ca3af58 1 68.27 ms 68.27 ms 68.27 ms ffff8cda745dfd70 9 54.53 ms 7.96 ms 6.06 ms ffff8cc7642a48b8 mmap_lock 14629 44.01 ms 60.00 us 3.01 us ffff8cc7625f9ca0 3481 42.63 ms 140.71 us 12.24 us ffffffff937906ac vmap_area_lock 16194 38.73 ms 42.15 us 2.39 us ffff8cd397cbc560 11 38.44 ms 10.39 ms 3.49 ms ffff8ccd6d12fbb8 mmap_lock 1 5.43 ms 5.43 ms 5.43 ms ffff8cd70018f0d8 1674 5.38 ms 422.93 us 3.21 us ffffffff92e06080 tasklist_lock 581 4.51 ms 130.68 us 7.75 us ffff8cc9b1259058 5 3.52 ms 1.27 ms 703.23 us ffff8cc754510070 112 3.47 ms 56.47 us 31.02 us ffff8ccee38b3120 381 3.31 ms 73.44 us 8.69 us ffffffff93790690 purge_vmap_area_lock 255 3.19 ms 36.35 us 12.49 us ffff8d053ce30c80 - Update default map size to 16384. - Allocate single letter option -M for --map-nr-entries, as it is proving being frequently used. - Fix struct rq lock access for older kernels with BPF's CO-RE (Compile once, run everywhere). - Fix problems found with MSAn. perf report/top: - Add inline information when using --call-graph=fp or lbr, as was already done to the --call-graph=dwarf callchain mode. - Improve the 'srcfile' sort key performance by really using an optimization introduced in 6.2 for the 'srcline' sort key that avoids calling addr2line for comparision with each sample. perf sched: - Make 'perf sched latency/map/replay' to use "sched:sched_waking" instead of "sched:sched_waking", consistent with 'perf record' since d566a9c2d482 ("perf sched: Prefer sched_waking event when it exists"). perf ftrace: - Make system wide the default target for latency subcommand, run the following command then generate some network traffic and press control+C: # perf ftrace latency -T __kfree_skb ^C DURATION | COUNT | GRAPH | 0 - 1 us | 27 | ############# | 1 - 2 us | 22 | ########### | 2 - 4 us | 8 | #### | 4 - 8 us | 5 | ## | 8 - 16 us | 24 | ############ | 16 - 32 us | 2 | # | 32 - 64 us | 1 | | 64 - 128 us | 0 | | 128 - 256 us | 0 | | 256 - 512 us | 0 | | 512 - 1024 us | 0 | | 1 - 2 ms | 0 | | 2 - 4 ms | 0 | | 4 - 8 ms | 0 | | 8 - 16 ms | 0 | | 16 - 32 ms | 0 | | 32 - 64 ms | 0 | | 64 - 128 ms | 0 | | 128 - 256 ms | 0 | | 256 - 512 ms | 0 | | 512 - 1024 ms | 0 | | 1 - ... s | 0 | | # perf top: - Add --branch-history (LBR: Last Branch Record) option, just like already available for 'perf record'. - Fix segfault in thread__comm_len() where thread->comm was being used outside thread->comm_lock. perf annotate: - Allow configuring objdump and addr2line in ~/.perfconfig., so that you can use alternative binaries, such as llvm's. perf kvm: - Add TUI mode for 'perf kvm stat report'. Reference counting: - Add reference count checking infrastructure to check for use after free, done to the 'cpumap', 'namespaces', 'maps' and 'map' structs, more to come. To build with it use -DREFCNT_CHECKING=1 in the make command line to build tools/perf. Documented at: https://perf.wiki.kernel.org/index.php/Reference_Count_Checking - The above caught, for instance, fix, present in this series: - Fix maps use after put in 'perf test "Share thread maps"': 'maps' is copied from leader, but the leader is put on line 79 and then 'maps' is used to read the reference count below - so a use after put, with the put of maps happening within thread__put. Fixed by reversing the order of puts so that the leader is put last. - Also several fixes were made to places where reference counts were not being held. - Make this one of the tests in 'make -C tools/perf build-test' to regularly build test it and to make sure no direct access to the reference counted structs are made, doing that via accessors to check the validity of the struct pointer. ARM64: - Fix 'perf report' segfault when filtering coresight traces by sparse lists of CPUs. - Add support for 'simd' as a sort field for 'perf report', to show ARM's NEON SIMD's predicate flags: "partial" and "empty". arm64 vendor events: - Add N1 metrics. Intel vendor events: - Add graniterapids, grandridge and sierraforrest events. - Refresh events for: alderlake, aldernaken, broadwell, broadwellde, broadwellx, cascadelakx, haswell, haswellx, icelake, icelakex, jaketown, meteorlake, knightslanding, sandybridge, sapphirerapids, silvermont, skylake, tigerlake and westmereep-dp - Refresh metrics for alderlake-n, broadwell, broadwellde, broadwellx, haswell, haswellx, icelakex, ivybridge, ivytown and skylakex. perf stat: - Implement --topdown using JSON metrics. - Add TopdownL1 JSON metric as a default if present, but disable it for now for some Intel hybrid architectures, a series of patches addressing this is being reviewed and will be submitted for v6.5. - Use metrics for --smi-cost. - Update topdown documentation. Vendor events (JSON) infrastructure: - Add support for computing and printing metric threshold values. For instance, here is one found in thesapphirerapids json file: { "BriefDescription": "Percentage of cycles spent in System Management Interrupts.", "MetricExpr": "((msr@aperf@ - cycles) / msr@aperf@ if msr@smi@ > 0 else 0)", "MetricGroup": "smi", "MetricName": "smi_cycles", "MetricThreshold": "smi_cycles > 0.1", "ScaleUnit": "100%" }, - Test parsing metric thresholds with the fake PMU in 'perf test pmu-events'. - Support for printing metric thresholds in 'perf list'. - Add --metric-no-threshold option to 'perf stat'. - Add rand (reverse and) and has_pmem (optane memory) support to metrics. - Sort list of input files to avoid depending on the order from readdir() helping in obtaining reproducible builds. S/390: - Add common metrics: - CPI (cycles per instruction), prbstate (ratio of instructions executed in problem state compared to total number of instructions), l1mp (Level one instruction and data cache misses per 100 instructions). - Add cache metrics for z13, z14, z15 and z16. - Add metric for TLB and cache. ARM: - Add raw decoding for SPE (Statistical Profiling Extension) v1.3 MTE (Memory Tagging Extension) and MOPS (Memory Operations) load/store. Intel PT hardware tracing: - Add event type names UINTR (User interrupt delivered) and UIRET (Exiting from user interrupt routine), documented in table 32-50 "CFE Packet Type and Vector Fields Details" in the Intel Processor Trace chapter of The Intel SDM Volume 3 version 078. - Add support for new branch instructions ERETS and ERETU. - Fix CYC timestamps after standalone CBR ARM CoreSight hardware tracing: - Allow user to override timestamp and contextid settings. - Fix segfault in dso lookup. - Fix timeless decode mode detection. - Add separate decode paths for timeless and per-thread modes. auxtrace: - Fix address filter entire kernel size. Miscellaneous: - Fix use-after-free and unaligned bugs in the PLT handling routines. - Use zfree() to reduce chances of use after free. - Add missing 0x prefix for addresses printed in hexadecimal in 'perf probe'. - Suppress massive unsupported target platform errors in the unwind code. - Fix return incorrect build_id size in elf_read_build_id(). - Fix 'perf scripts intel-pt-events.py' IPC output for Python 2 . - Add missing new parameter in kfree_skb tracepoint to the python scripts using it. - Add 'perf bench syscall fork' benchmark. - Add support for printing PERF_MEM_LVLNUM_UNC (Uncached access) in 'perf mem'. - Fix wrong size expectation for perf test 'Setup struct perf_event_attr' caused by the patch adding perf_event_attr::config3. - Fix some spelling mistakes" * tag 'perf-tools-for-v6.4-3-2023-05-06' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (365 commits) Revert "perf build: Make BUILD_BPF_SKEL default, rename to NO_BPF_SKEL" Revert "perf build: Warn for BPF skeletons if endian mismatches" perf metrics: Fix SEGV with --for-each-cgroup perf bpf skels: Stop using vmlinux.h generated from BTF, use subset of used structs + CO-RE perf stat: Separate bperf from bpf_profiler perf test record+probe_libc_inet_pton: Fix call chain match on x86_64 perf test record+probe_libc_inet_pton: Fix call chain match on s390 perf tracepoint: Fix memory leak in is_valid_tracepoint() perf cs-etm: Add fix for coresight trace for any range of CPUs perf build: Fix unescaped # in perf build-test perf unwind: Suppress massive unsupported target platform errors perf script: Add new parameter in kfree_skb tracepoint to the python scripts using it perf script: Print raw ip instead of binary offset for callchain perf symbols: Fix return incorrect build_id size in elf_read_build_id() perf list: Modify the warning message about scandirat(3) perf list: Fix memory leaks in print_tracepoint_events() perf lock contention: Rework offset calculation with BPF CO-RE perf lock contention: Fix struct rq lock access perf stat: Disable TopdownL1 on hybrid perf stat: Avoid SEGV on counter->name ...
2023-05-06Merge tag 'net-6.4-rc1' of ↵Linus Torvalds2-7/+10
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from netfilter. Current release - regressions: - sched: act_pedit: free pedit keys on bail from offset check Current release - new code bugs: - pds_core: - Kconfig fixes (DEBUGFS and AUXILIARY_BUS) - fix mutex double unlock in error path Previous releases - regressions: - sched: cls_api: remove block_cb from driver_list before freeing - nf_tables: fix ct untracked match breakage - eth: mtk_eth_soc: drop generic vlan rx offload - sched: flower: fix error handler on replace Previous releases - always broken: - tcp: fix skb_copy_ubufs() vs BIG TCP - ipv6: fix skb hash for some RST packets - af_packet: don't send zero-byte data in packet_sendmsg_spkt() - rxrpc: timeout handling fixes after moving client call connection to the I/O thread - ixgbe: fix panic during XDP_TX with > 64 CPUs - igc: RMW the SRRCTL register to prevent losing timestamp config - dsa: mt7530: fix corrupt frames using TRGMII on 40 MHz XTAL MT7621 - r8152: - fix flow control issue of RTL8156A - fix the poor throughput for 2.5G devices - move setting r8153b_rx_agg_chg_indicate() to fix coalescing - enable autosuspend - ncsi: clear Tx enable mode when handling a Config required AEN - octeontx2-pf: macsec: fixes for CN10KB ASIC rev Misc: - 9p: remove INET dependency" * tag 'net-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits) net: bcmgenet: Remove phy_stop() from bcmgenet_netif_stop() pds_core: fix mutex double unlock in error path net/sched: flower: fix error handler on replace Revert "net/sched: flower: Fix wrong handle assignment during filter change" net/sched: flower: fix filter idr initialization net: fec: correct the counting of XDP sent frames bonding: add xdp_features support net: enetc: check the index of the SFI rather than the handle sfc: Add back mailing list virtio_net: suppress cpu stall when free_unused_bufs ice: block LAN in case of VF to VF offload net: dsa: mt7530: fix network connectivity with multiple CPU ports net: dsa: mt7530: fix corrupt frames using trgmii on 40 MHz XTAL MT7621 9p: Remove INET dependency netfilter: nf_tables: fix ct untracked match breakage af_packet: Don't send zero-byte data in packet_sendmsg_spkt(). igc: read before write to SRRCTL register pds_core: add AUXILIARY_BUS and NET_DEVLINK to Kconfig pds_core: remove CONFIG_DEBUG_FS from makefile ionic: catch failure from devlink_alloc ...
2023-05-04Merge tag 'mm-stable-2023-05-03-16-22' of ↵Linus Torvalds1-6/+40
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull more MM updates from Andrew Morton: - Some DAMON cleanups from Kefeng Wang - Some KSM work from David Hildenbrand, to make the PR_SET_MEMORY_MERGE ioctl's behavior more similar to KSM's behavior. [ Andrew called these "final", but I suspect we'll have a series fixing up the fact that the last commit in the dmapools series in the previous pull seems to have unintentionally just reverted all the other commits in the same series.. - Linus ] * tag 'mm-stable-2023-05-03-16-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: mm: hwpoison: coredump: support recovery from dump_user_range() mm/page_alloc: add some comments to explain the possible hole in __pageblock_pfn_to_page() mm/ksm: move disabling KSM from s390/gmap code to KSM code selftests/ksm: ksm_functional_tests: add prctl unmerge test mm/ksm: unmerge and clear VM_MERGEABLE when setting PR_SET_MEMORY_MERGE=0 mm/damon/paddr: fix missing folio_sz update in damon_pa_young() mm/damon/paddr: minor refactor of damon_pa_mark_accessed_or_deactivate() mm/damon/paddr: minor refactor of damon_pa_pageout()
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-31 10:32:59 +0300