Age | Commit message (Collapse) | Author | Files | Lines |
|
[ Upstream commit 498d3486376befe4e82b5334d44bbc86b1982ee4 ]
L3PMCx0AC and L3PMCx0AD, used in l3_xi_sampled_latency* events, have a
quirk that requires them to be programmed with SliceId set to 0x3.
Without this, the events do not count at all and affects dependent
metrics such as l3_read_miss_latency.
If ThreadMask is not specified, the amd-uncore driver internally sets
ThreadMask to 0x3, EnAllCores to 0x1 and EnAllSlices to 0x1 but does
not set SliceId. Since SliceId must also be set to 0x3 in this case,
specify all the other fields explicitly.
E.g.
$ sudo perf stat -e l3_xi_sampled_latency.all,l3_xi_sampled_latency_requests.all -a sleep 1
Before:
Performance counter stats for 'system wide':
0 l3_xi_sampled_latency.all
0 l3_xi_sampled_latency_requests.all
1.005155399 seconds time elapsed
After:
Performance counter stats for 'system wide':
921,446 l3_xi_sampled_latency.all
54,210 l3_xi_sampled_latency_requests.all
1.005664472 seconds time elapsed
Fixes: 5b2ca349c313 ("perf vendor events amd: Add Zen 4 uncore events")
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: ananth.narayan@amd.com
Cc: ravi.bangoria@amd.com
Cc: eranian@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240301084431.646221-1-sandipan.das@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ef5de1613d7d92bdc975e6beb34bb0fa94f34078 ]
The commit in Fixes has reordered some code, but missed an error handling
path.
'goto err' now, in order to avoid a memory leak in case of error.
Fixes: f63a536f03a2 ("perf pmu: Merge JSON events with sysfs at load time")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: kernel-janitors@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/9538b2b634894c33168dfe9d848d4df31fd4d801.1693085544.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 25412c0364f7110faa6053c73e3fd47ca956b8c3 ]
Currently the perf tool doesn't detect support for extended event types
on Apple M1/M2 systems, and will not auto-expand plain PERF_EVENT_TYPE
hardware events into per-PMU events. This is due to the detection of
extended event types not handling mandatory filters required by the
M1/M2 PMU driver.
PMU drivers and the core perf_events code can require that
perf_event_attr::exclude_* filters are configured in a specific way and
may reject certain configurations of filters, for example:
(a) Many PMUs lack support for any event filtering, and require all
perf_event_attr::exclude_* bits to be clear. This includes Alpha's
CPU PMU, and ARM CPU PMUs prior to the introduction of PMUv2 in
ARMv7,
(b) When /proc/sys/kernel/perf_event_paranoid >= 2, the perf core
requires that perf_event_attr::exclude_kernel is set.
(c) The Apple M1/M2 PMU requires that perf_event_attr::exclude_guest is
set as the hardware PMU does not count while a guest is running (but
might be extended in future to do so).
In is_event_supported(), we try to account for cases (a) and (b), first
attempting to open an event without any filters, and if this fails,
retrying with perf_event_attr::exclude_kernel set. We do not account for
case (c), or any other filters that drivers could theoretically require
to be set.
Thus is_event_supported() will fail to detect support for any events
targeting an Apple M1/M2 PMU, even where events would be supported with
perf_event_attr:::exclude_guest set.
Since commit:
82fe2e45cdb00de4 ("perf pmus: Check if we can encode the PMU number in perf_event_attr.type")
... we use is_event_supported() to detect support for extended types,
with the PMU ID encoded into the perf_event_attr::type. As above, on an
Apple M1/M2 system this will always fail to detect that the event is
supported, and consequently we fail to detect support for extended types
even when these are supported, as they have been since commit:
5c816728651ae425 ("arm_pmu: Add PERF_PMU_CAP_EXTENDED_HW_TYPE capability")
Due to this, the perf tool will not automatically expand plain
PERF_TYPE_HARDWARE events into per-PMU events, even when all the
necessary kernel support is present.
This patch updates is_event_supported() to additionally try opening
events with perf_event_attr::exclude_guest set, allowing support for
events to be detected on Apple M1/M2 systems. I believe that this is
sufficient for all contemporary CPU PMU drivers, though in future it may
be necessary to check for other combinations of filter bits.
I've deliberately changed the check to not expect a specific error code
for missing filters, as today ;the kernel may return a number of
different error codes for missing filters (e.g. -EACCESS, -EINVAL, or
-EOPNOTSUPP) depending on why and where the filter configuration is
rejected, and retrying for any error is more robust.
Note that this does not remove the need for commit:
a24d9d9dc096fc0d ("perf parse-events: Make legacy events lower priority than sysfs/JSON")
... which is still necessary so that named-pmu/event/ events work on
kernels without extended type support, even if the event name happens to
be the same as a PERF_EVENT_TYPE_HARDWARE event (e.g. as is the case for
the M1/M2 PMU's 'cycles' and 'instructions' events).
Fixes: 82fe2e45cdb00de4 ("perf pmus: Check if we can encode the PMU number in perf_event_attr.type")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Ian Rogers <irogers@google.com>
Tested-by: James Clark <james.clark@arm.com>
Tested-by: Marc Zyngier <maz@kernel.org>
Cc: Hector Martin <marcan@marcan.st>
Cc: James Clark <james.clark@arm.com>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240126145605.1005472-1-mark.rutland@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6d6be5eb45b423a37d746d3ee0fd0c78f76ead9f ]
Counts were switched from the scaled saved value form to the
aggregated count to avoid double accounting. When this happened the
removing of scaling for a count should have been removed, however, it
wasn't and this wasn't observed as it normally doesn't matter because
a counter's scale is 1. A problem was observed with RAPL events that
are scaled.
Fixes: 37cc8ad77cf8 ("perf metric: Directly use counts rather than saved_value")
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Kaige Ye <ye@kaige.org>
Cc: John Garry <john.g.garry@oracle.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240209204947.3873294-5-irogers@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2543947c77e0e224bda86b4e7220c2f6714da463 ]
Cycles is recognized as part of a hard coded metric in stat-shadow.c,
it may call print_metric_only with a NULL fmt string leading to a
segfault. Handle the NULL fmt explicitly.
Fixes: 088519f318be ("perf stat: Move the display functions to stat-display.c")
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Kaige Ye <ye@kaige.org>
Cc: John Garry <john.g.garry@oracle.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240209204947.3873294-4-irogers@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6dd76680b925228312756c13b9b983661b552a64 ]
Events in metrics cannot use '/' as a separator, it would be
recognized as a divide, so they use '@'. The '@' is recognized in the
metricgroups code and changed to '/', do the same in the has_event
function so that the parsing is only tried without the @s.
Fixes: 4a4a9bf9075f ("perf expr: Add has_event function")
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Kaige Ye <ye@kaige.org>
Cc: John Garry <john.g.garry@oracle.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240209204947.3873294-3-irogers@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c7ba9d18ae47924a6ea6a47ca139779f58eb83c0 ]
The child_process for addr2line sets in and out to -1 so that pipes
get created. It is the caller's responsibility to close the pipes,
finish_command doesn't do it. Add the missed closes.
Fixes: b3801e791231 ("perf srcline: Simplify addr2line subprocess")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Tom Rix <trix@redhat.com>
Cc: llvm@lists.linux.dev
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240201001504.1348511-8-irogers@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1eb3d924e3c0b8c27388b0583a989d757866efb6 ]
slist needs to be freed in both error path and normal path in
thread_map__new_by_tid_str().
Fixes: b52956c961be3a04 ("perf tools: Allow multiple threads or processes in record, stat, top")
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240206083228.172607-6-yangjihong1@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ffd856537b95dd65facb4e0c78ca1cb92c2048ff ]
When building perf with BPF skels we either copy the minimalistic
tools/perf/util/bpf_skel/vmlinux/vmlinux.h or use bpftool to generate a
vmlinux from BTF, storing the result in $(SKEL_OUT)/vmlinux.h.
We need to remove that when doing a 'make -C tools/perf clean', fix it.
Fixes: b7a2d774c9c5a9a3 ("perf build: Add ability to build with a generated vmlinux.h")
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: bpf@vger.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/Zbz89KK5wHfZ82jv@x1
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4962aec0d684c8edb14574ccd0da53e4926ff834 ]
data->id has been initialized at line 2362, remove duplicate initialization.
Fixes: 3ad31d8a0df2 ("perf evsel: Centralize perf_sample initialization")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240127025756.4041808-1-yangjihong1@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 24852ef2e2d5c555c2da05baff112ea414b6e0f5 ]
The msr PMU is a software one, meaning msr events may be grouped
with events in a hardware context. As the msr PMU isn't marked as a
software PMU by perf_pmu__is_software, groups with the msr PMU in
are broken and the msr events placed in a different group. This
may lead to multiplexing errors where a hardware event isn't
counted while the msr event, such as tsc, is. Fix all of this by
marking the msr PMU as software, which agrees with the driver.
Before:
```
$ perf stat -e '{slots,tsc}' -a true
WARNING: events were regrouped to match PMUs
Performance counter stats for 'system wide':
1,750,335 slots
4,243,557 tsc
0.001456717 seconds time elapsed
```
After:
```
$ perf stat -e '{slots,tsc}' -a true
Performance counter stats for 'system wide':
12,526,380 slots
3,415,163 tsc
0.001488360 seconds time elapsed
```
Fixes: 251aa040244a ("perf parse-events: Wildcard most "numeric" events")
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: James Clark <james.clark@arm.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Samantha Alt <samantha.alt@intel.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Link: https://lore.kernel.org/r/20240124234200.1510417-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
mode before recording
[ Upstream commit 02f9b50e04812782fd006ed21c6da1c5e3e373da ]
In pipe mode, no need to switch perf data output, therefore,
'--timestamp-filename' option should not take effect.
Check the conflict before recording and output WARNING.
In this case, the check pipe mode in perf_data__switch() can be removed.
Before:
# perf record --timestamp-filename -o- perf test -w noploop | perf report -i- --percent-limit=1
# To display the perf.data header info, please use --header/--header-only options.
#
[ perf record: Woken up 1 times to write data ]
[ perf record: Dump -.2024011812110182 ]
#
# Total Lost Samples: 0
#
# Samples: 4K of event 'cycles:P'
# Event count (approx.): 2176784359
#
# Overhead Command Shared Object Symbol
# ........ ....... .................... ......................................
#
97.83% perf perf [.] noploop
#
# (Tip: Print event counts in CSV format with: perf stat -x,)
#
After:
# perf record --timestamp-filename -o- perf test -w noploop | perf report -i- --percent-limit=1
WARNING: --timestamp-filename option is not available in pipe mode.
# To display the perf.data header info, please use --header/--header-only options.
#
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.000 MB - ]
#
# Total Lost Samples: 0
#
# Samples: 4K of event 'cycles:P'
# Event count (approx.): 2185575421
#
# Overhead Command Shared Object Symbol
# ........ ....... ..................... .............................................
#
97.75% perf perf [.] noploop
#
# (Tip: Profiling branch (mis)predictions with: perf record -b / perf report)
#
Fixes: ecfd7a9c044e ("perf record: Add '--timestamp-filename' option to append timestamp to output file name")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240119040304.3708522-3-yangjihong1@huawei.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit aff10a165201f6f60cff225083ce301ad3f5d8f1 ]
perf_data__switch() may not assign a legal value to 'new_filename'.
In this case, 'new_filename' uses the on-stack value, which may cause a
incorrect free and unexpected result.
Fixes: 03724b2e9c45 ("perf record: Allow to limit number of reported perf.data files")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240119040304.3708522-2-yangjihong1@huawei.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 10b4c4bce3f5541f54bcc2039720b11d2bc96d79 ]
If SAVE and RESTORE unwind hints are in different basic blocks, and
objtool sees the RESTORE before the SAVE, it errors out with:
vmlinux.o: warning: objtool: vmw_port_hb_in+0x242: objtool isn't smart enough to handle this CFI save/restore combo
In such a case, defer following the RESTORE block until the
straight-line path gets followed later.
Fixes: 8faea26e6111 ("objtool: Re-add UNWIND_HINT_{SAVE_RESTORE}")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202402240702.zJFNmahW-lkp@intel.com/
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20240227073527.avcm5naavbv3cj5s@treble
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f0ddf15f0a74c27eb4b2271a90e69948acc3fa2c ]
The two tests that make use of multicast routig (router.sh and
router_multicast.sh) are currently failing in the netdev CI because the
kernel is missing multicast routing support.
Fix by adding the required config entries.
Fixes: 6d4efada3b82 ("selftests: forwarding: Add multicast routing test")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240208165538.1303021-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4acf4e62cd572b0c806035046b3698f5585ab821 ]
The config file contains a partial kernel configuration to be used by
`virtme-configkernel --custom'. The presumption is that the config file
contains all Kconfig options needed by the selftests from the directory.
In net/forwarding/config, many are missing, which manifests as spurious
failures when running the selftests, with messages about unknown device
types, qdisc kinds or classifier actions. Add the missing configurations.
Tested the resulting configuration using virtme-ng as follows:
# vng -b -f tools/testing/selftests/net/forwarding/config
# vng --user root
(within the VM:)
# make -C tools/testing/selftests TARGETS=net/forwarding run_tests
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/025abded7ff9cea5874a7fe35dcd3fd41bf5e6ac.1706286755.git.petrm@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: f0ddf15f0a74 ("selftests: forwarding: Add missing multicast routing config entries")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 903fad4394666bc23975c93fb58f137ce64b5192 ]
The .BTF_ids section is pre-filled with zeroed BTF ID entries during the
build and afterwards patched by resolve_btfids with correct values.
Since resolve_btfids always writes in host-native endianness, it relies
on libelf to do the translation when the target ELF is cross-compiled to
a different endianness (this was introduced in commit 61e8aeda9398
("bpf: Fix libelf endian handling in resolv_btfids")).
Unfortunately, the translation will corrupt the flags fields of SET8
entries because these were written during vmlinux compilation and are in
the correct endianness already. This will lead to numerous selftests
failures such as:
$ sudo ./test_verifier 502 502
#502/p sleepable fentry accept FAIL
Failed to load prog 'Invalid argument'!
bpf_fentry_test1 is not sleepable
verification time 34 usec
stack depth 0
processed 0 insns (limit 1000000) max_states_per_insn 0 total_states 0 peak_states 0 mark_read 0
Summary: 0 PASSED, 0 SKIPPED, 1 FAILED
Since it's not possible to instruct libelf to translate just certain
values, let's manually bswap the flags (both global and entry flags) in
resolve_btfids when needed, so that libelf then translates everything
correctly.
Fixes: ef2c6f370a63 ("tools/resolve_btfids: Add support for 8-byte BTF sets")
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/7b6bff690919555574ce0f13d2a5996cacf7bf69.1707223196.git.vmalik@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9707ac4fe2f5bac6406d2403f8b8a64d7b3d8e43 ]
Instead of using magic offsets to access BTF ID set data, leverage types
from btf_ids.h (btf_id_set and btf_id_set8) which define the actual
layout of the data. Thanks to this change, set sorting should also
continue working if the layout changes.
This requires to sync the definition of 'struct btf_id_set8' from
include/linux/btf_ids.h to tools/include/linux/btf_ids.h. We don't sync
the rest of the file at the moment, b/c that would require to also sync
multiple dependent headers and we don't need any other defs from
btf_ids.h.
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/bpf/ff7f062ddf6a00815fda3087957c4ce667f50532.1707223196.git.vmalik@redhat.com
Stable-dep-of: 903fad439466 ("tools/resolve_btfids: Fix cross-compilation to non-host endianness")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 92a871ab9fa59a74d013bc04f321026a057618e7 ]
When the feature_flags and xdp_zc_max_segs fields were added to the libbpf
bpf_xdp_query_opts, the code writing them did not use the OPTS_SET() macro.
This causes libbpf to write to those fields unconditionally, which means
that programs compiled against an older version of libbpf (with a smaller
size of the bpf_xdp_query_opts struct) will have its stack corrupted by
libbpf writing out of bounds.
The patch adding the feature_flags field has an early bail out if the
feature_flags field is not part of the opts struct (via the OPTS_HAS)
macro, but the patch adding xdp_zc_max_segs does not. For consistency, this
fix just changes the assignments to both fields to use the OPTS_SET()
macro.
Fixes: 13ce2daa259a ("xsk: add new netlink attribute dedicated for ZC max frags")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240206125922.1992815-1-toke@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d7bc416aa5cc183691287e8f0b1d5b182a7ce9c3 ]
If PERF_EVENT program has __arg_ctx argument with matching
architecture-specific pt_regs/user_pt_regs/user_regs_struct pointer
type, libbpf should still perform type rewrite for old kernels, but not
emit the warning. Fix copy/paste from kernel code where 0 is meant to
signify "no error" condition. For libbpf we need to return "true" to
proceed with type rewrite (which for PERF_EVENT program will be
a canonical `struct bpf_perf_event_data *` type).
Fixes: 9eea8fafe33e ("libbpf: fix __arg_ctx type enforcement for perf_event programs")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240206002243.1439450-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a68b50f47bec8bd6a33b07b7e1562db2553981a7 ]
After commit c698eaebdf47 ("selftests/bpf: trace_helpers.c: Optimize
kallsyms cache") trace_helpers.c now includes libbpf_internal.h, and
thus can no longer use the u32 type (among others) since they are poison
in libbpf_internal.h. Replace u32 with __u32 to fix the following error
when building trace_helpers.c on powerpc:
error: attempt to use poisoned "u32"
Fixes: c698eaebdf47 ("selftests/bpf: trace_helpers.c: Optimize kallsyms cache")
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20240202095559.12900-1-shung-hsi.yu@suse.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 93ee1eb85e28d1e35bb059c1f5965d65d5fc83c2 ]
LIBBPF_API annotation seems missing on libbpf_set_memlock_rlim API, so
add it to make this API callable from libbpf's shared library version.
Fixes: e542f2c4cd16 ("libbpf: Auto-bump RLIMIT_MEMLOCK if kernel needs it for BPF")
Fixes: ab9a5a05dc48 ("libbpf: fix up few libbpf.map problems")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20240201172027.604869-3-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2ef61296d2844c6a4211e07ab70ef2fb412b2c30 ]
After a recent change in the vmtest runner, this test started failing
sporadically.
Investigation showed that this test was subject to race condition which
got exacerbated after the vm runner change. The symptoms being that the
logic that waited for an ICMPv4 packet is naive and will break if 5 or
more non-ICMPv4 packets make it to tap0.
When ICMPv6 is enabled, the kernel will generate traffic such as ICMPv6
router solicitation...
On a system with good performance, the expected ICMPv4 packet would very
likely make it to the network interface promptly, but on a system with
poor performance, those "guarantees" do not hold true anymore.
Given that the test is IPv4 only, this change disable IPv6 in the test
netns by setting `net.ipv6.conf.all.disable_ipv6` to 1.
This essentially leaves "ping" as the sole generator of traffic in the
network namespace.
If this test was to be made IPv6 compatible, the logic in
`wait_for_packet` would need to be modified.
In more details...
At a high level, the test does:
- create a new namespace
- in `setup_redirect_target` set up lo, tap0, and link_err interfaces as
well as add 2 routes that attaches ingress/egress sections of
`test_lwt_redirect.bpf.o` to the xmit path.
- in `send_and_capture_test_packets` send an ICMP packet and read off
the tap interface (using `wait_for_packet`) to check that a ICMP packet
with the right size is read.
`wait_for_packet` will try to read `max_retry` (5) times from the tap0
fd looking for an ICMPv4 packet matching some criteria.
The problem is that when we set up the `tap0` interface, because IPv6 is
enabled by default, traffic such as Router solicitation is sent through
tap0, as in:
# tcpdump -r /tmp/lwt_redirect.pc
reading from file /tmp/lwt_redirect.pcap, link-type EN10MB (Ethernet)
04:46:23.578352 IP6 :: > ff02::1:ffc0:4427: ICMP6, neighbor solicitation, who has fe80::fcba:dff:fec0:4427, length 32
04:46:23.659522 IP6 :: > ff02::16: HBH ICMP6, multicast listener report v2, 1 group record(s), length 28
04:46:24.389169 IP 10.0.0.1 > 20.0.0.9: ICMP echo request, id 122, seq 1, length 108
04:46:24.618599 IP6 fe80::fcba:dff:fec0:4427 > ff02::16: HBH ICMP6, multicast listener report v2, 1 group record(s), length 28
04:46:24.619985 IP6 fe80::fcba:dff:fec0:4427 > ff02::2: ICMP6, router solicitation, length 16
04:46:24.767326 IP6 fe80::fcba:dff:fec0:4427 > ff02::16: HBH ICMP6, multicast listener report v2, 1 group record(s), length 28
04:46:28.936402 IP6 fe80::fcba:dff:fec0:4427 > ff02::2: ICMP6, router solicitation, length 16
If `wait_for_packet` sees 5 non-ICMPv4 packets, it will return 0, which is what we see in:
2024-01-31T03:51:25.0336992Z test_lwt_redirect_run:PASS:netns_create 0 nsec
2024-01-31T03:51:25.0341309Z open_netns:PASS:malloc token 0 nsec
2024-01-31T03:51:25.0344844Z open_netns:PASS:open /proc/self/ns/net 0 nsec
2024-01-31T03:51:25.0350071Z open_netns:PASS:open netns fd 0 nsec
2024-01-31T03:51:25.0353516Z open_netns:PASS:setns 0 nsec
2024-01-31T03:51:25.0356560Z test_lwt_redirect_run:PASS:setns 0 nsec
2024-01-31T03:51:25.0360140Z open_tuntap:PASS:open(/dev/net/tun) 0 nsec
2024-01-31T03:51:25.0363822Z open_tuntap:PASS:ioctl(TUNSETIFF) 0 nsec
2024-01-31T03:51:25.0367402Z open_tuntap:PASS:fcntl(O_NONBLOCK) 0 nsec
2024-01-31T03:51:25.0371167Z setup_redirect_target:PASS:open_tuntap 0 nsec
2024-01-31T03:51:25.0375180Z setup_redirect_target:PASS:if_nametoindex 0 nsec
2024-01-31T03:51:25.0379929Z setup_redirect_target:PASS:ip link add link_err type dummy 0 nsec
2024-01-31T03:51:25.0384874Z setup_redirect_target:PASS:ip link set lo up 0 nsec
2024-01-31T03:51:25.0389678Z setup_redirect_target:PASS:ip addr add dev lo 10.0.0.1/32 0 nsec
2024-01-31T03:51:25.0394814Z setup_redirect_target:PASS:ip link set link_err up 0 nsec
2024-01-31T03:51:25.0399874Z setup_redirect_target:PASS:ip link set tap0 up 0 nsec
2024-01-31T03:51:25.0407731Z setup_redirect_target:PASS:ip route add 10.0.0.0/24 dev link_err encap bpf xmit obj test_lwt_redirect.bpf.o sec redir_ingress 0 nsec
2024-01-31T03:51:25.0419105Z setup_redirect_target:PASS:ip route add 20.0.0.0/24 dev link_err encap bpf xmit obj test_lwt_redirect.bpf.o sec redir_egress 0 nsec
2024-01-31T03:51:25.0427209Z test_lwt_redirect_normal:PASS:setup_redirect_target 0 nsec
2024-01-31T03:51:25.0431424Z ping_dev:PASS:if_nametoindex 0 nsec
2024-01-31T03:51:25.0437222Z send_and_capture_test_packets:FAIL:wait_for_epacket unexpected wait_for_epacket: actual 0 != expected 1
2024-01-31T03:51:25.0448298Z (/tmp/work/bpf/bpf/tools/testing/selftests/bpf/prog_tests/lwt_redirect.c:175: errno: Success) test_lwt_redirect_normal egress test fails
2024-01-31T03:51:25.0457124Z close_netns:PASS:setns 0 nsec
When running in a VM which potential resource contrains, the odds that calling
`ping` is not scheduled very soon after bringing `tap0` up increases,
and with this the chances to get our ICMP packet pushed to position 6+
in the network trace.
To confirm this indeed solves the issue, I ran the test 100 times in a
row with:
errors=0
successes=0
for i in `seq 1 100`
do
./test_progs -t lwt_redirect/lwt_redirect_normal
if [ $? -eq 0 ]; then
successes=$((successes+1))
else
errors=$((errors+1))
fi
done
echo "successes: $successes/errors: $errors"
While this test would at least fail a couple of time every 10 runs, here
it ran 100 times with no error.
Fixes: 43a7c3ef8a15 ("selftests/bpf: Add lwt_xmit tests for BPF_REDIRECT")
Signed-off-by: Manu Bretelle <chantr4@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240131053212.2247527-1-chantr4@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9eea8fafe33eb70868f6ace2fc1e17c4ff5539c3 ]
Adjust PERF_EVENT type enforcement around __arg_ctx to match exactly
what kernel is doing.
Fixes: 76ec90a996e3 ("libbpf: warn on unexpected __arg_ctx type when rewriting BTF")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240125205510.3642094-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ad57654053805bf9a62602aaec74cc78edb6f235 ]
Android implementation of libc errors out with -EINVAL in faccessat() if
passed AT_EACCESS ([0]), this leads to ridiculous issue with libbpf
refusing to load /sys/kernel/btf/vmlinux on Androids ([1]). Fix by
detecting Android and redefining AT_EACCESS to 0, it's equivalent on
Android.
[0] https://android.googlesource.com/platform/bionic/+/refs/heads/android13-release/libc/bionic/faccessat.cpp#50
[1] https://github.com/libbpf/libbpf-bootstrap/issues/250#issuecomment-1911324250
Fixes: 6a4ab8869d0b ("libbpf: Fix the case of running as non-root with capabilities")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20240126220944.2497665-1-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ce6f6cffaeaa0a3bcdafcae7fe03c68c3afae631 ]
After the previous patch that speeded up the test (by avoiding neigh
discovery in IPv6), the BPF CI occasionally hits this error:
rcv tstamp unexpected pkt rcv tstamp: actual 0 == expected 0
The test complains about the cmsg returned from the recvmsg() does not
have the rcv timestamp. Setting skb->tstamp or not is
controlled by a kernel static key "netstamp_needed_key". The static
key is enabled whenever this is at least one sk with the SOCK_TIMESTAMP
set.
The test_redirect_dtime does use setsockopt() to turn on
the SOCK_TIMESTAMP for the reading sk. In the kernel
net_enable_timestamp() has a delay to enable the "netstamp_needed_key"
when CONFIG_JUMP_LABEL is set. This potential delay is the likely reason
for packet missing rcv timestamp occasionally.
This patch is to create udp sockets with SOCK_TIMESTAMP set.
It sends and receives some packets until the received packet
has a rcv timestamp. It currently retries at most 5 times with 1s
in between. This should be enough to wait for the "netstamp_needed_key".
It then holds on to the socket and only closes it at the end of the test.
This guarantees that the test has the "netstamp_needed_key" key turned
on from the beginning.
To simplify the udp sockets setup, they are sending/receiving packets
in the same netns (ns_dst is used) and communicate over the "lo" dev.
Hence, the patch enables the "lo" dev in the ns_dst.
Fixes: c803475fd8dd ("bpf: selftests: test skb->tstamp in redirect_neigh")
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240120060518.3604920-2-martin.lau@linux.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 177f1d083a19af58f4b1206d299ed73689249fd8 ]
BPF CI has been reporting the tc_redirect_dtime test failing
from time to time:
test_inet_dtime:PASS:setns src 0 nsec
(network_helpers.c:253: errno: No route to host) Failed to connect to server
close_netns:PASS:setns 0 nsec
test_inet_dtime:FAIL:connect_to_fd unexpected connect_to_fd: actual -1 < expected 0
test_tcp_clear_dtime:PASS:tcp ip6 clear dtime ingress_fwdns_p100 0 nsec
The connect_to_fd failure (EHOSTUNREACH) is from the
test_tcp_clear_dtime() test and it is the very first IPv6 traffic
after setting up all the links, addresses, and routes.
The symptom is this first connect() is always slow. In my setup, it
could take ~3s.
After some tracing and tcpdump, the slowness is mostly spent in
the neighbor solicitation in the "ns_fwd" namespace while
the "ns_src" and "ns_dst" are fine.
I forced the kernel to drop the neighbor solicitation messages.
I can then reproduce EHOSTUNREACH. What actually happen could be:
- the neighbor advertisement came back a little slow.
- the "ns_fwd" namespace concluded a neighbor discovery failure
and triggered the ndisc_error_report() => ip6_link_failure() =>
icmpv6_send(skb, ICMPV6_DEST_UNREACH, ICMPV6_ADDR_UNREACH, 0)
- the client's connect() reports EHOSTUNREACH after receiving
the ICMPV6_DEST_UNREACH message.
The neigh table of both "ns_src" and "ns_dst" namespace has already
been manually populated but not the "ns_fwd" namespace. This patch
fixes it by manually populating the neigh table also in the "ns_fwd"
namespace.
Although the namespace configuration part had been existed before
the tc_redirect_dtime test, still Fixes-tagging the patch when
the tc_redirect_dtime test was added since it is the only test
hitting it so far.
Fixes: c803475fd8dd ("bpf: selftests: test skb->tstamp in redirect_neigh")
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240120060518.3604920-1-martin.lau@linux.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2adb2e0fcdf3c6d8e28a5a9c33e458e1037ae5ad ]
The error path frees wrong array, it should be ref_ctr_offsets.
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Fixes: a7795698f8b6 ("bpftool: Add support to display uprobe_multi links")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240119110505.400573-4-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 40628f9fff73adecac77a9aa390f8016724cad99 ]
Check that bpf_object__load() successfully creates map_in_maps
with BPF_MAP_TYPE_PERF_EVENT_ARRAY values.
These changes cover fix in the previous patch
"libbpf: Apply map_set_def_max_entries() for inner_maps on creation".
A command line output is:
- w/o fix
$ sudo ./test_maps
libbpf: map 'mim_array_pe': failed to create inner map: -22
libbpf: map 'mim_array_pe': failed to create: Invalid argument(-22)
libbpf: failed to load object './test_map_in_map.bpf.o'
Failed to load test prog
- with fix
$ sudo ./test_maps
...
test_maps: OK, 0 SKIPPED
Fixes: 646f02ffdd49 ("libbpf: Add BTF-defined map-in-map support")
Signed-off-by: Andrey Grafin <conquistador@yandex-team.ru>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/bpf/20240117130619.9403-2-conquistador@yandex-team.ru
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f04deb90e516e8e48bf8693397529bc942a9e80b ]
This patch allows to auto create BPF_MAP_TYPE_ARRAY_OF_MAPS and
BPF_MAP_TYPE_HASH_OF_MAPS with values of BPF_MAP_TYPE_PERF_EVENT_ARRAY
by bpf_object__load().
Previous behaviour created a zero filled btf_map_def for inner maps and
tried to use it for a map creation but the linux kernel forbids to create
a BPF_MAP_TYPE_PERF_EVENT_ARRAY map with max_entries=0.
Fixes: 646f02ffdd49 ("libbpf: Add BTF-defined map-in-map support")
Signed-off-by: Andrey Grafin <conquistador@yandex-team.ru>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/bpf/20240117130619.9403-1-conquistador@yandex-team.ru
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d177c1be06ce28aa8c8710ac55be1b5ad3f314c6 ]
It is possible for bpf_kfunc_call_test_release() to be called from
bpf_map_free_deferred() when bpf_testmod is already unloaded and
perf_test_stuct.cnt which it tries to decrease is no longer in memory.
This patch tries to fix the issue by waiting for all references to be
dropped in bpf_testmod_exit().
The issue can be triggered by running 'test_progs -t map_kptr' in 6.5,
but is obscured in 6.6 by d119357d07435 ("rcu-tasks: Treat only
synchronous grace periods urgently").
Fixes: 65eb006d85a2 ("bpf: Move kernel test kfuncs to bpf_testmod")
Signed-off-by: Artem Savkov <asavkov@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/82f55c0e-0ec8-4fe1-8d8c-b1de07558ad9@linux.dev
Link: https://lore.kernel.org/bpf/20240110085737.8895-1-asavkov@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f5f30386c78105cba520e443a6a9ee945ec1d066 ]
There exists the following warning when building bpftool:
CC prog.o
prog.c: In function ‘profile_open_perf_events’:
prog.c:2301:24: warning: ‘calloc’ sizes specified with ‘sizeof’ in the earlier argument and not in the later argument [-Wcalloc-transposed-args]
2301 | sizeof(int), obj->rodata->num_cpu * obj->rodata->num_metric);
| ^~~
prog.c:2301:24: note: earlier argument should specify number of elements, later size of each element
Tested with the latest upstream GCC which contains a new warning option
-Wcalloc-transposed-args. The first argument to calloc is documented to
be number of elements in array, while the second argument is size of each
element, just switch the first and second arguments of calloc() to silence
the build warning, compile tested only.
Fixes: 47c09d6a9f67 ("bpftool: Introduce "prog profile" command")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20240116061920.31172-1-yangtiezhu@loongson.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
Pull kvm fixes from Paolo Bonzini:
"KVM GUEST_MEMFD fixes for 6.8:
- Make KVM_MEM_GUEST_MEMFD mutually exclusive with KVM_MEM_READONLY
to avoid creating an inconsistent ABI (KVM_MEM_GUEST_MEMFD is not
writable from userspace, so there would be no way to write to a
read-only guest_memfd).
- Update documentation for KVM_SW_PROTECTED_VM to make it abundantly
clear that such VMs are purely for development and testing.
- Limit KVM_SW_PROTECTED_VM guests to the TDP MMU, as the long term
plan is to support confidential VMs with deterministic private
memory (SNP and TDX) only in the TDP MMU.
- Fix a bug in a GUEST_MEMFD dirty logging test that caused false
passes.
x86 fixes:
- Fix missing marking of a guest page as dirty when emulating an
atomic access.
- Check for mmu_notifier invalidation events before faulting in the
pfn, and before acquiring mmu_lock, to avoid unnecessary work and
lock contention with preemptible kernels (including
CONFIG_PREEMPT_DYNAMIC in non-preemptible mode).
- Disable AMD DebugSwap by default, it breaks VMSA signing and will
be re-enabled with a better VM creation API in 6.10.
- Do the cache flush of converted pages in svm_register_enc_region()
before dropping kvm->lock, to avoid a race with unregistering of
the same region and the consequent use-after-free issue"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
SEV: disable SEV-ES DebugSwap by default
KVM: x86/mmu: Retry fault before acquiring mmu_lock if mapping is changing
KVM: SVM: Flush pages under kvm->lock to fix UAF in svm_register_enc_region()
KVM: selftests: Add a testcase to verify GUEST_MEMFD and READONLY are exclusive
KVM: selftests: Create GUEST_MEMFD for relevant invalid flags testcases
KVM: x86/mmu: Restrict KVM_SW_PROTECTED_VM to the TDP MMU
KVM: x86: Update KVM_SW_PROTECTED_VM docs to make it clear they're a WIP
KVM: Make KVM_MEM_GUEST_MEMFD mutually exclusive with KVM_MEM_READONLY
KVM: x86: Mark target gfn of emulated atomic instruction as dirty
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf, ipsec and netfilter.
No solution yet for the stmmac issue mentioned in the last PR, but it
proved to be a lockdep false positive, not a blocker.
Current release - regressions:
- dpll: move all dpll<>netdev helpers to dpll code, fix build
regression with old compilers
Current release - new code bugs:
- page_pool: fix netlink dump stop/resume
Previous releases - regressions:
- bpf: fix verifier to check bpf_func_state->callback_depth when
pruning states as otherwise unsafe programs could get accepted
- ipv6: avoid possible UAF in ip6_route_mpath_notify()
- ice: reconfig host after changing MSI-X on VF
- mlx5:
- e-switch, change flow rule destination checking
- add a memory barrier to prevent a possible null-ptr-deref
- switch to using _bh variant of of spinlock where needed
Previous releases - always broken:
- netfilter: nf_conntrack_h323: add protection for bmp length out of
range
- bpf: fix to zero-initialise xdp_rxq_info struct before running XDP
program in CPU map which led to random xdp_md fields
- xfrm: fix UDP encapsulation in TX packet offload
- netrom: fix data-races around sysctls
- ice:
- fix potential NULL pointer dereference in ice_bridge_setlink()
- fix uninitialized dplls mutex usage
- igc: avoid returning frame twice in XDP_REDIRECT
- i40e: disable NAPI right after disabling irqs when handling
xsk_pool
- geneve: make sure to pull inner header in geneve_rx()
- sparx5: fix use after free inside sparx5_del_mact_entry
- dsa: microchip: fix register write order in ksz8_ind_write8()
Misc:
- selftests: mptcp: fixes for diag.sh"
* tag 'net-6.8-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (63 commits)
net: pds_core: Fix possible double free in error handling path
netrom: Fix data-races around sysctl_net_busy_read
netrom: Fix a data-race around sysctl_netrom_link_fails_count
netrom: Fix a data-race around sysctl_netrom_routing_control
netrom: Fix a data-race around sysctl_netrom_transport_no_activity_timeout
netrom: Fix a data-race around sysctl_netrom_transport_requested_window_size
netrom: Fix a data-race around sysctl_netrom_transport_busy_delay
netrom: Fix a data-race around sysctl_netrom_transport_acknowledge_delay
netrom: Fix a data-race around sysctl_netrom_transport_maximum_tries
netrom: Fix a data-race around sysctl_netrom_transport_timeout
netrom: Fix data-races around sysctl_netrom_network_ttl_initialiser
netrom: Fix a data-race around sysctl_netrom_obsolescence_count_initialiser
netrom: Fix a data-race around sysctl_netrom_default_path_quality
netfilter: nf_conntrack_h323: Add protection for bmp length out of range
netfilter: nf_tables: mark set as dead when unbinding anonymous set with timeout
netfilter: nft_ct: fix l3num expectations with inet pseudo family
netfilter: nf_tables: reject constant set with timeout
netfilter: nf_tables: disallow anonymous set with timeout flag
net/rds: fix WARNING in rds_conn_connect_if_down
net: dsa: microchip: fix register write order in ksz8_ind_write8()
...
|
|
Adjust the XDP feature flags for the bond device when no bond slave
devices are attached. After 9b0ed890ac2a ("bonding: do not report
NETDEV_XDP_ACT_XSK_ZEROCOPY"), the empty bond device must report 0
as flags instead of NETDEV_XDP_ACT_MASK.
# ./vmtest.sh -- ./test_progs -t xdp_bond
[...]
[ 3.983311] bond1 (unregistering): (slave veth1_1): Releasing backup interface
[ 3.995434] bond1 (unregistering): Released all slaves
[ 4.022311] bond2: (slave veth2_1): Releasing backup interface
#507/1 xdp_bonding/xdp_bonding_attach:OK
#507/2 xdp_bonding/xdp_bonding_nested:OK
#507/3 xdp_bonding/xdp_bonding_features:OK
#507/4 xdp_bonding/xdp_bonding_roundrobin:OK
#507/5 xdp_bonding/xdp_bonding_activebackup:OK
#507/6 xdp_bonding/xdp_bonding_xor_layer2:OK
#507/7 xdp_bonding/xdp_bonding_xor_layer23:OK
#507/8 xdp_bonding/xdp_bonding_xor_layer34:OK
#507/9 xdp_bonding/xdp_bonding_redirect_multi:OK
#507 xdp_bonding:OK
Summary: 1/9 PASSED, 0 SKIPPED, 0 FAILED
[ 4.185255] bond2 (unregistering): Released all slaves
[...]
Fixes: 9b0ed890ac2a ("bonding: do not report NETDEV_XDP_ACT_XSK_ZEROCOPY")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Message-ID: <20240305090829.17131-2-daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The test case was minimized from mailing list discussion [0].
It is equivalent to the following C program:
struct iter_limit_bug_ctx { __u64 a; __u64 b; __u64 c; };
static __naked void iter_limit_bug_cb(void)
{
switch (bpf_get_prandom_u32()) {
case 1: ctx->a = 42; break;
case 2: ctx->b = 42; break;
default: ctx->c = 42; break;
}
}
int iter_limit_bug(struct __sk_buff *skb)
{
struct iter_limit_bug_ctx ctx = { 7, 7, 7 };
bpf_loop(2, iter_limit_bug_cb, &ctx, 0);
if (ctx.a == 42 && ctx.b == 42 && ctx.c == 7)
asm volatile("r1 /= 0;":::"r1");
return 0;
}
The main idea is that each loop iteration changes one of the state
variables in a non-deterministic manner. Hence it is premature to
prune the states that have two iterations left comparing them to
states with one iteration left.
E.g. {{7,7,7}, callback_depth=0} can reach state {42,42,7},
while {{7,7,7}, callback_depth=1} can't.
[0] https://lore.kernel.org/bpf/9b251840-7cb8-4d17-bd23-1fc8071d8eef@linux.dev/
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240222154121.6991-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
When creating a lot of listener sockets, it is enough to wait only for
the last one, like we are doing before in diag.sh for other subtests.
If we do a check for each listener sockets, each time listing all
available sockets, it can take a very long time in very slow
environments, at the point we can reach some timeout.
When using the debug kconfig, the waiting time switches from more than
8 sec to 0.1 sec on my side. In slow/busy environments, and with a poll
timeout set to 30 ms, the waiting time could go up to ~100 sec because
the listener socket would timeout and stop, while the script would still
be checking one by one if all sockets are ready. The result is that
after having waited for everything to be ready, all sockets have been
stopped due to a timeout, and it is too late for the script to check how
many there were.
While at it, also removed ss options we don't need: we only need the
filtering options, to count how many listener sockets have been created.
We don't need to ask ss to display internal TCP information, and the
memory if the output is dropped by the 'wc -l' command anyway.
Fixes: b4b51d36bbaa ("selftests: mptcp: explicitly trigger the listener diag code-path")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/r/20240301063754.2ecefecf@kernel.org
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The test counter 'test_cnt' should not be returned in diag.sh, e.g. what
if only the 4th test fail? Will do 'exit 4' which is 'exit ${KSFT_SKIP}',
the whole test will be marked as skipped instead of 'failed'!
So we should do ret=${KSFT_FAIL} instead.
Fixes: df62f2ec3df6 ("selftests/mptcp: add diag interface tests")
Cc: stable@vger.kernel.org
Fixes: 42fb6cddec3b ("selftests: mptcp: more stable diag tests")
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix IOMMU table initialisation when doing kdump over SR-IOV
- Fix incorrect RTAS function name for resetting TCE tables
- Fix fpu_signal selftest failures since a recent change
Thanks to Gaurav Batra and Nathan Lynch.
* tag 'powerpc-6.8-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
selftests/powerpc: Fix fpu_signal failures
powerpc/rtas: use correct function name for resetting TCE tables
powerpc/pseries/iommu: IOMMU table is not initialized for kdump over SR-IOV
|
|
My recent commit e5d00aaac651 ("selftests/powerpc: Check all FPRs in
fpu_preempt") inadvertently broke the fpu_signal test.
It needs to take into account that fpu_preempt now loads 32 FPRs, so
enlarge darray.
Also use the newly added randomise_darray() to properly randomise darray.
Finally the checking done in signal_fpu_sig() needs to skip checking
f30/f31, because they are used as scratch registers in check_all_fprs(),
called by preempt_fpu(), and so could hold other values when the signal
is taken.
Fixes: e5d00aaac651 ("selftests/powerpc: Check all FPRs in fpu_preempt")
Reported-by: Spoorthy <spoorthy@linux.ibm.com>
Depends-on: 2ba107f6795d ("selftests/powerpc: Generate better bit patterns for FPU tests")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240301101035.1230024-1-mpe@ellerman.id.au
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, WiFi and netfilter.
We have one outstanding issue with the stmmac driver, which may be a
LOCKDEP false positive, not a blocker.
Current release - regressions:
- netfilter: nf_tables: re-allow NFPROTO_INET in
nft_(match/target)_validate()
- eth: ionic: fix error handling in PCI reset code
Current release - new code bugs:
- eth: stmmac: complete meta data only when enabled, fix null-deref
- kunit: fix again checksum tests on big endian CPUs
Previous releases - regressions:
- veth: try harder when allocating queue memory
- Bluetooth:
- hci_bcm4377: do not mark valid bd_addr as invalid
- hci_event: fix handling of HCI_EV_IO_CAPA_REQUEST
Previous releases - always broken:
- info leak in __skb_datagram_iter() on netlink socket
- mptcp:
- map v4 address to v6 when destroying subflow
- fix potential wake-up event loss due to sndbuf auto-tuning
- fix double-free on socket dismantle
- wifi: nl80211: reject iftype change with mesh ID change
- fix small out-of-bound read when validating netlink be16/32 types
- rtnetlink: fix error logic of IFLA_BRIDGE_FLAGS writing back
- ipv6: fix potential "struct net" ref-leak in inet6_rtm_getaddr()
- ip_tunnel: prevent perpetual headroom growth with huge number of
tunnels on top of each other
- mctp: fix skb leaks on error paths of mctp_local_output()
- eth: ice: fixes for DPLL state reporting
- dpll: rely on rcu for netdev_dpll_pin() to prevent UaF
- eth: dpaa: accept phy-interface-type = '10gbase-r' in the device
tree"
* tag 'net-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (73 commits)
dpll: fix build failure due to rcu_dereference_check() on unknown type
kunit: Fix again checksum tests on big endian CPUs
tls: fix use-after-free on failed backlog decryption
tls: separate no-async decryption request handling from async
tls: fix peeking with sync+async decryption
tls: decrement decrypt_pending if no async completion will be called
gtp: fix use-after-free and null-ptr-deref in gtp_newlink()
net: hsr: Use correct offset for HSR TLV values in supervisory HSR frames
igb: extend PTP timestamp adjustments to i211
rtnetlink: fix error logic of IFLA_BRIDGE_FLAGS writing back
tools: ynl: fix handling of multiple mcast groups
selftests: netfilter: add bridge conntrack + multicast test case
netfilter: bridge: confirm multicast packets before passing them up the stack
netfilter: nf_tables: allow NFPROTO_INET in nft_(match/target)_validate()
Bluetooth: qca: Fix triggering coredump implementation
Bluetooth: hci_qca: Set BDA quirk bit if fwnode exists in DT
Bluetooth: qca: Fix wrong event type for patch config command
Bluetooth: Enforce validation on max value of connection interval
Bluetooth: hci_event: Fix handling of HCI_EV_IO_CAPA_REQUEST
Bluetooth: mgmt: Fix limited discoverable off timeout
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
Patch #1 restores NFPROTO_INET with nft_compat, from Ignat Korchagin.
Patch #2 fixes an issue with bridge netfilter and broadcast/multicast
packets.
There is a day 0 bug in br_netfilter when used with connection tracking.
Conntrack assumes that an nf_conn structure that is not yet added to
hash table ("unconfirmed"), is only visible by the current cpu that is
processing the sk_buff.
For bridge this isn't true, sk_buff can get cloned in between, and
clones can be processed in parallel on different cpu.
This patch disables NAT and conntrack helpers for multicast packets.
Patch #3 adds a selftest to cover for the br_netfilter bug.
netfilter pull request 24-02-29
* tag 'nf-24-02-29' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
selftests: netfilter: add bridge conntrack + multicast test case
netfilter: bridge: confirm multicast packets before passing them up the stack
netfilter: nf_tables: allow NFPROTO_INET in nft_(match/target)_validate()
====================
Link: https://lore.kernel.org/r/20240229000135.8780-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
We never increment the group number iterator, so all groups
get recorded into index 0 of the mcast_groups[] array.
As a result YNL can only handle using the last group.
For example using the "netdev" sample on kernel with
page pool commands results in:
$ ./samples/netdev
YNL: Multicast group 'mgmt' not found
Most families have only one multicast group, so this hasn't
been noticed. Plus perhaps developers usually test the last
group which would have worked.
Fixes: 86878f14d71a ("tools: ynl: user space helpers")
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240226214019.1255242-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add test case for multicast packet confirm race.
Without preceding patch, this should result in:
WARNING: CPU: 0 PID: 38 at net/netfilter/nf_conntrack_core.c:1198 __nf_conntrack_confirm+0x3ed/0x5f0
Workqueue: events_unbound macvlan_process_broadcast
RIP: 0010:__nf_conntrack_confirm+0x3ed/0x5f0
? __nf_conntrack_confirm+0x3ed/0x5f0
nf_confirm+0x2ad/0x2d0
nf_hook_slow+0x36/0xd0
ip_local_deliver+0xce/0x110
__netif_receive_skb_one_core+0x4f/0x70
process_backlog+0x8c/0x130
[..]
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The mptcp diag interface already experienced a few locking bugs
that lockdep and appropriate coverage have detected in advance.
Let's add a test-case triggering the relevant code path, to prevent
similar issues in the future.
Be careful to cope with very slow environments.
Note that we don't need an explicit timeout on the mptcp_connect
subprocess to cope with eventual bug/hang-up as the final cleanup
terminating the child processes will take care of that.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-10-162e87e48497@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commands 'ss -M' are used in script mptcp_join.sh to display only MPTCP
sockets. So it must be checked if ss tool supports MPTCP in this script.
Fixes: e274f7154008 ("selftests: mptcp: add subflow limits test-cases")
Cc: stable@vger.kernel.org
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-7-162e87e48497@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now both a v4 address and a v4-mapped address are supported when
destroying a userspace pm subflow, this patch adds a second subflow
to "userspace pm add & remove address" test, and two subflows could
be removed two different ways, one with the v4mapped and one with v4.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/387
Fixes: 48d73f609dcc ("selftests: mptcp: update userspace pm addr tests")
Cc: stable@vger.kernel.org
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-2-162e87e48497@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Test that we keep GRO flag in sync when XDP is disabled while
the device is closed.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl fixes from Dan Williams:
"A collection of significant fixes for the CXL subsystem.
The largest change in this set, that bordered on "new development", is
the fix for the fact that the location of the new qos_class attribute
did not match the Documentation. The fix ends up deleting more code
than it added, and it has a new unit test to backstop basic errors in
this interface going forward. So the "red-diff" and unit test saved
the "rip it out and try again" response.
In contrast, the new notification path for firmware reported CXL
errors (CXL CPER notifications) has a locking context bug that can not
be fixed with a red-diff. Given where the release cycle stands, it is
not comfortable to squeeze in that fix in these waning days. So, that
receives the "back it out and try again later" treatment.
There is a regression fix in the code that establishes memory NUMA
nodes for platform CXL regions. That has an ack from x86 folks. There
are a couple more fixups for Linux to understand (reassemble) CXL
regions instantiated by platform firmware. The policy around platforms
that do not match host-physical-address with system-physical-address
(i.e. systems that have an address translation mechanism between the
address range reported in the ACPI CEDT.CFMWS and endpoint decoders)
has been softened to abort driver load rather than teardown the memory
range (can cause system hangs). Lastly, there is a robustness /
regression fix for cases where the driver would previously continue in
the face of error, and a fixup for PCI error notification handling.
Summary:
- Fix NUMA initialization from ACPI CEDT.CFMWS
- Fix region assembly failures due to async init order
- Fix / simplify export of qos_class information
- Fix cxl_acpi initialization vs single-window-init failures
- Fix handling of repeated 'pci_channel_io_frozen' notifications
- Workaround platforms that violate host-physical-address ==
system-physical address assumptions
- Defer CXL CPER notification handling to v6.9"
* tag 'cxl-fixes-6.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/acpi: Fix load failures due to single window creation failure
acpi/ghes: Remove CXL CPER notifications
cxl/pci: Fix disabling memory if DVSEC CXL Range does not match a CFMWS window
cxl/test: Add support for qos_class checking
cxl: Fix sysfs export of qos_class for memdev
cxl: Remove unnecessary type cast in cxl_qos_class_verify()
cxl: Change 'struct cxl_memdev_state' *_perf_list to single 'struct cxl_dpa_perf'
cxl/region: Allow out of order assembly of autodiscovered regions
cxl/region: Handle endpoint decoders in cxl_region_find_decoder()
x86/numa: Fix the sort compare func used in numa_fill_memblks()
x86/numa: Fix the address overlap check in numa_fill_memblks()
cxl/pci: Skip to handle RAS errors if CXL.mem device is detached
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"A batch of MM (and one non-MM) hotfixes.
Ten are cc:stable and the remainder address post-6.7 issues or aren't
considered appropriate for backporting"
* tag 'mm-hotfixes-stable-2024-02-22-15-02' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
kasan: guard release_free_meta() shadow access with kasan_arch_is_ready()
mm/damon/lru_sort: fix quota status loss due to online tunings
mm/damon/reclaim: fix quota stauts loss due to online tunings
MAINTAINERS: mailmap: update Shakeel's email address
mm/damon/sysfs-schemes: handle schemes sysfs dir removal before commit_schemes_quota_goals
mm: memcontrol: clarify swapaccount=0 deprecation warning
mm/memblock: add MEMBLOCK_RSRV_NOINIT into flagname[] array
mm/zswap: invalidate duplicate entry when !zswap_enabled
lib/Kconfig.debug: TEST_IOV_ITER depends on MMU
mm/swap: fix race when skipping swapcache
mm/swap_state: update zswap LRU's protection range with the folio locked
selftests/mm: uffd-unit-test check if huge page size is 0
mm/damon/core: check apply interval in damon_do_apply_schemes()
mm: zswap: fix missing folio cleanup in writeback race path
|