| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Remove comparing pointer to 0 to avoid this warning from coccinelle:
./tools/testing/selftests/mm/map_populate.c:80:16-17: WARNING comparing pointer to 0, suggest !E
./tools/testing/selftests/mm/map_populate.c:80:16-17: WARNING comparing pointer to 0
Link: https://lkml.kernel.org/r/20230817160033.90079-1-tuananhlfc@gmail.com
Signed-off-by: Anh Tuan Phan <tuananhlfc@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently, not all kernel memory usage is being accounted for. This
commit switches to using the kernel entry within memory.stat which
already includes kernel_stack, pagetables, and slab. The kernel entry
also includes vmalloc and other additional kernel memory use cases which
were missing.
Link: https://lkml.kernel.org/r/bvrhe2tpsts2azaroq4ubp2slawmop6orndsswrewuscw3ugvk@kmemmrttsnc7
Signed-off-by: Lucas Karpinski <lkarpins@redhat.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "New page table range API", v6.
This patchset changes the API used by the MM to set up page table entries.
The four APIs are:
set_ptes(mm, addr, ptep, pte, nr)
update_mmu_cache_range(vma, addr, ptep, nr)
flush_dcache_folio(folio)
flush_icache_pages(vma, page, nr)
flush_dcache_folio() isn't technically new, but no architecture
implemented it, so I've done that for them. The old APIs remain around
but are mostly implemented by calling the new interfaces.
The new APIs are based around setting up N page table entries at once.
The N entries belong to the same PMD, the same folio and the same VMA, so
ptep++ is a legitimate operation, and locking is taken care of for you.
Some architectures can do a better job of it than just a loop, but I have
hesitated to make too deep a change to architectures I don't understand
well.
One thing I have changed in every architecture is that PG_arch_1 is now a
per-folio bit instead of a per-page bit when used for dcache clean/dirty
tracking. This was something that would have to happen eventually, and it
makes sense to do it now rather than iterate over every page involved in a
cache flush and figure out if it needs to happen.
The point of all this is better performance, and Fengwei Yin has measured
improvement on x86. I suspect you'll see improvement on your architecture
too. Try the new will-it-scale test mentioned here:
https://lore.kernel.org/linux-mm/20230206140639.538867-5-fengwei.yin@intel.com/
You'll need to run it on an XFS filesystem and have
CONFIG_TRANSPARENT_HUGEPAGE set.
This patchset is the basis for much of the anonymous large folio work
being done by Ryan, so it's received quite a lot of testing over the last
few months.
This patch (of 38):
Determine if a value lies within a range more efficiently (subtraction +
comparison vs two comparisons and an AND). It also has useful (under some
circumstances) behaviour if the range exceeds the maximum value of the
type. Convert all the conflicting definitions of in_range() within the
kernel; some can use the generic definition while others need their own
definition.
Link: https://lkml.kernel.org/r/20230802151406.3735276-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20230802151406.3735276-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
|
|
The cachestat kselftest runs a test on a normal file, which is created
temporarily in the current directory. Among the tests it runs there is a
call to fsync(), which is expected to clean all dirty pages used by the
file.
However the tmpfs filesystem implements fsync() as noop_fsync(), so the
call will not even attempt to clean anything when this test file happens
to live on a tmpfs instance. This happens in an initramfs, or when the
current directory is in /dev/shm or sometimes /tmp.
To avoid this test failing wrongly, use statfs() to check which filesystem
the test file lives on. If that is "tmpfs", we skip the fsync() test.
Since the fsync test is only one part of the "normal file" test, we now
execute this twice, skipping the fsync part on the first call. This way
only the second test, including the fsync part, would be skipped.
Link: https://lkml.kernel.org/r/20230821160534.3414911-3-andre.przywara@arm.com
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "selftests: cachestat: fix run on older kernels", v2.
I ran all kernel selftests on some test machine, and stumbled upon
cachestat failing (among others). These patches fix the run on older
kernels and when the current directory is on a tmpfs instance.
This patch (of 2):
As cachestat is a new syscall, it won't be available on older kernels, for
instance those running on a development machine. At the moment the test
reports all tests as "not ok" in this case.
Test for the cachestat syscall availability first, before doing further
tests, and bail out early with a TAP SKIP comment.
This also uses the opportunity to add the proper TAP headers, and add one
check for proper error handling (illegal file descriptor).
Link: https://lkml.kernel.org/r/20230821160534.3414911-1-andre.przywara@arm.com
Link: https://lkml.kernel.org/r/20230821160534.3414911-2-andre.przywara@arm.com
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Nhat Pham <nphamcs@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Let's test whether merging and unmerging in PROT_NONE areas works as
expected.
Pass a page protection to mmap_and_merge_range(), which will trigger
an mprotect() after writing to the pages, but before enabling merging.
Make sure that unsharing works as expected, by performing a ptrace write
(using /proc/self/mem) and by setting MADV_UNMERGEABLE.
Note that this implicitly tests that ptrace writes in an inaccessible
(PROT_NONE) mapping work as expected.
[david@redhat.com: use sizeof(i) in test_prot_none(), per Peter]
Link: https://lkml.kernel.org/r/e9cdb144-70c7-6596-2377-e675635c94e0@redhat.com
Link: https://lkml.kernel.org/r/20230803143208.383663-8-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: liubo <liubo254@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
anything got merged
Let's extend mmap_and_merge_range() to test if anything in the current
process was merged. range_maps_duplicates() is too unreliable for that
use case, so instead look at KSM stats.
Trigger a complete unmerge first, to cleanup the stable tree and
stabilize accounting of merged pages.
Note that we're using /proc/self/ksm_merging_pages instead of
/proc/self/ksm_stat, because that one is available in more existing
kernels.
If /proc/self/ksm_merging_pages can't be opened, we can't perform any
checks and simply skip them.
We have to special-case the shared zeropage for now. But the only user
-- test_unmerge_zero_pages() -- performs its own merge checks.
Link: https://lkml.kernel.org/r/20230803143208.383663-7-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: liubo <liubo254@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
|
|
Extract from current /proc/self/smaps output:
Swap: 0 kB
SwapPss: 0 kB
Locked: 0 kB
THPeligible: 0
ProtectionKey: 0
That's not the alignment shown in Documentation/filesystems/proc.rst: it's
an ugly artifact from missing out the %8 other fields are using; but
there's even one selftest which expects it to look that way. Hoping no
other smaps parsers depend on THPeligible to look so ugly, fix these.
Link: https://lkml.kernel.org/r/cfb81f7a-f448-5bc2-b0e1-8136fcd1dd8c@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This adds proper tests for the nesting functionality of vm.memfd_noexec as
well as some minor cleanups to spawn_*_thread().
Link: https://lkml.kernel.org/r/20230814-memfd-vm-noexec-uapi-fixes-v2-5-7ff9e3e10ba6@cyphar.com
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Daniel Verkamp <dverkamp@chromium.org>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Jeff Xu <jeffxu@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Given the difficulty of auditing all of userspace to figure out whether
every memfd_create() user has switched to passing MFD_EXEC and
MFD_NOEXEC_SEAL flags, it seems far less distruptive to make it possible
for older programs that don't make use of executable memfds to run under
vm.memfd_noexec=2. Otherwise, a small dependency change can result in
spurious errors. For programs that don't use executable memfds, passing
MFD_NOEXEC_SEAL is functionally a no-op and thus having the same
In addition, every failure under vm.memfd_noexec=2 needs to print to the
kernel log so that userspace can figure out where the error came from.
The concerns about pr_warn_ratelimited() spam that caused the switch to
pr_warn_once()[1,2] do not apply to the vm.memfd_noexec=2 case.
This is a user-visible API change, but as it allows programs to do
something that would be blocked before, and the sysctl itself was broken
and recently released, it seems unlikely this will cause any issues.
[1]: https://lore.kernel.org/Y5yS8wCnuYGLHMj4@x1n/
[2]: https://lore.kernel.org/202212161233.85C9783FB@keescook/
Link: https://lkml.kernel.org/r/20230814-memfd-vm-noexec-uapi-fixes-v2-2-7ff9e3e10ba6@cyphar.com
Fixes: 105ff5339f49 ("mm/memfd: add MFD_NOEXEC_SEAL and MFD_EXEC")
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Daniel Verkamp <dverkamp@chromium.org>
Cc: Jeff Xu <jeffxu@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "memfd: cleanups for vm.memfd_noexec", v2.
The most critical issue with vm.memfd_noexec=2 (the fact that passing
MFD_EXEC would bypass it entirely[1]) has been fixed in Andrew's
tree[2], but there are still some outstanding issues that need to be
addressed:
* vm.memfd_noexec=2 shouldn't reject old-style memfd_create(2) syscalls
because it will make it far to difficult to ever migrate. Instead it
should imply MFD_EXEC.
* The dmesg warnings are pr_warn_once(), which on most systems means
that they will be used up by systemd or some other boot process and
userspace developers will never see it.
- For the !(flags & (MFD_EXEC | MFD_NOEXEC_SEAL)) case, outputting a
rate-limited message to the kernel log is necessary to tell
userspace that they should add the new flags.
Arguably the most ideal way to deal with the spam concern[3,4]
while still prompting userspace to switch to the new flags would be
to only log the warning once per task or something similar.
However, adding something to task_struct for tracking this would be
needless bloat for a single pr_warn_ratelimited().
So just switch to pr_info_ratelimited() to avoid spamming the log
with something that isn't a real warning. There's lots of
info-level stuff in dmesg, it seems really unlikely that this
should be an actual problem. Most programs are already switching to
the new flags anyway.
- For the vm.memfd_noexec=2 case, we need to log a warning for every
failure because otherwise userspace will have no idea why their
previously working program started returning -EACCES (previously
-EINVAL) from memfd_create(2). pr_warn_once() is simply wrong here.
* The racheting mechanism for vm.memfd_noexec makes it incredibly
unappealing for most users to enable the sysctl because enabling it
on &init_pid_ns means you need a system reboot to unset it. Given the
actual security threat being protected against, CAP_SYS_ADMIN users
being restricted in this way makes little sense.
The argument for this ratcheting by the original author was that it
allows you to have a hierarchical setting that cannot be unset by
child pidnses, but this is not accurate -- changing the parent
pidns's vm.memfd_noexec setting to be more restrictive didn't affect
children.
Instead, switch the vm.memfd_noexec sysctl to be properly
hierarchical and allow CAP_SYS_ADMIN users (in the pidns's owning
userns) to lower the setting as long as it is not lower than the
parent's effective setting. This change also makes it so that
changing a parent pidns's vm.memfd_noexec will affect all
descendants, providing a properly hierarchical setting. The
performance impact of this is incredibly minimal since the maximum
depth of pidns is 32 and it is only checked during memfd_create(2)
and unshare(CLONE_NEWPID).
* The memfd selftests would not exit with a non-zero error code when
certain tests that ran in a forked process (specifically the ones
related to MFD_EXEC and MFD_NOEXEC_SEAL) failed.
[1]: https://lore.kernel.org/all/ZJwcsU0vI-nzgOB_@codewreck.org/
[2]: https://lore.kernel.org/all/20230705063315.3680666-1-jeffxu@google.com/
[3]: https://lore.kernel.org/Y5yS8wCnuYGLHMj4@x1n/
[4]: https://lore.kernel.org/f185bb42-b29c-977e-312e-3349eea15383@linuxfoundation.org/
This patch (of 5):
Before this change, a test runner using this self test would see a return
code of 0 when the tests using a child process (namely the MFD_NOEXEC_SEAL
and MFD_EXEC tests) failed, masking test failures.
Link: https://lkml.kernel.org/r/20230814-memfd-vm-noexec-uapi-fixes-v2-0-7ff9e3e10ba6@cyphar.com
Link: https://lkml.kernel.org/r/20230814-memfd-vm-noexec-uapi-fixes-v2-1-7ff9e3e10ba6@cyphar.com
Fixes: 11f75a01448f ("selftests/memfd: add tests for MFD_NOEXEC_SEAL MFD_EXEC")
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Reviewed-by: Jeff Xu <jeffxu@google.com>
Cc: "Christian Brauner (Microsoft)" <brauner@kernel.org>
Cc: Daniel Verkamp <dverkamp@chromium.org>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
commit 686a8bb72349("selftests/mm: split uffd tests into uffd-stress and
uffd-unit-tests") split uffd tests into uffd-stress and uffd-unit-tests,
obviously we need to modify the help information synchronously.
Also modify code indentation.
Link: https://lkml.kernel.org/r/tencent_64FC724AC5F05568F41BD1C68058E83CEB05@qq.com
Signed-off-by: Rong Tao <rongtao@cestc.cn>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Test existence of files and validity of input keyword for DAMON monitoring
target based DAMOS filter on DAMON sysfs interface.
Link: https://lkml.kernel.org/r/20230802214312.110532-11-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add a selftest for checking existence of addr_{start,end} files under
DAMOS filter directory, and 'addr' damos filter type input of DAMON sysfs
interface.
Link: https://lkml.kernel.org/r/20230802214312.110532-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Update sysfs.sh DAMON selftest for checking existence of 'total_bytes'
file under the 'tried_regions' directory of DAMON sysfs interface.
Link: https://lkml.kernel.org/r/20230802213222.109841-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add KSM_MERGE_TIME and KSM_MERGE_TIME_HUGE_PAGES tests with
size of 100.
./run_vmtests.sh -t ksm
-----------------------------
running ./ksm_tests -H -s 100
-----------------------------
Number of normal pages: 0
Number of huge pages: 50
Total size: 100 MiB
Total time: 0.399844662 s
Average speed: 250.097 MiB/s
[PASS]
-----------------------------
running ./ksm_tests -P -s 100
-----------------------------
Total size: 100 MiB
Total time: 0.451931496 s
Average speed: 221.272 MiB/s
[PASS]
Link: https://lkml.kernel.org/r/20230728164102.4655-1-ayush.jain3@amd.com
Signed-off-by: Ayush Jain <ayush.jain3@amd.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Stefan Roesch <shr@devkernel.io>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
After commit 2c2241081f7d ("mm/gup: move private gup FOLL_ flags to
internal.h") FOLL_LONGTERM flag value got updated from 0x10000 to 0x100 at
include/linux/mm_types.h.
As hmm.hmm_device_private.hmm_gup_test uses FOLL_LONGTERM Updating same
here as well.
Before this change test goes in an infinite assert loop in
hmm.hmm_device_private.hmm_gup_test
==========================================================
RUN hmm.hmm_device_private.hmm_gup_test ...
hmm-tests.c:1962:hmm_gup_test:Expected HMM_DMIRROR_PROT_WRITE..
..(2) == m[2] (34)
hmm-tests.c:157:hmm_gup_test:Expected ret (-1) == 0 (0)
hmm-tests.c:157:hmm_gup_test:Expected ret (-1) == 0 (0)
...
==========================================================
Call Trace:
<TASK>
? sched_clock+0xd/0x20
? __lock_acquire.constprop.0+0x120/0x6c0
? ktime_get+0x2c/0xd0
? sched_clock+0xd/0x20
? local_clock+0x12/0xd0
? lock_release+0x26e/0x3b0
pin_user_pages_fast+0x4c/0x70
gup_test_ioctl+0x4ff/0xbb0
? gup_test_ioctl+0x68c/0xbb0
__x64_sys_ioctl+0x99/0xd0
do_syscall_64+0x60/0x90
? syscall_exit_to_user_mode+0x2a/0x50
? do_syscall_64+0x6d/0x90
? syscall_exit_to_user_mode+0x2a/0x50
? do_syscall_64+0x6d/0x90
? irqentry_exit_to_user_mode+0xd/0x20
? irqentry_exit+0x3f/0x50
? exc_page_fault+0x96/0x200
entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7f6aaa31aaff
After this change test is able to pass successfully.
Link: https://lkml.kernel.org/r/20230808124347.79163-1-ayush.jain3@amd.com
Fixes: 2c2241081f7d ("mm/gup: move private gup FOLL_ flags to internal.h")
Signed-off-by: Ayush Jain <ayush.jain3@amd.com>
Reviewed-by: Raghavendra K T <raghavendra.kt@amd.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
test_kmem_basic creates 100,000 negative dentries, with each one mapping
to a slab object. After memory.high is set, these are reclaimed through
the shrink_slab function call which reclaims all 100,000 entries. The
test passes the majority of the time because when slab1 or current is
calculated, it is often above 0, however, 0 is also an acceptable value.
Link: https://lkml.kernel.org/r/7d6gcuyzdjcice6qbphrmpmv5skr5jtglg375unnjxqhstvhxc@qkn6dw6bao6v
Signed-off-by: Lucas Karpinski <lkarpins@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Since the mas_preallocate() calculation has been updated to be more
precise, the testing must also be updated to check for what is expected.
Link: https://lkml.kernel.org/r/20230724183157.3939892-13-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The current preallocation strategy is to preallocate the absolute
worst-case allocation for a tree modification. The entry (or NULL) is
needed to know how many nodes are needed to write to the tree. Start by
adding the argument to the mas_preallocate() definition.
Link: https://lkml.kernel.org/r/20230724183157.3939892-8-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
It is very unclear to me how one is supposed to run all the mm selftests
consistently and get clear results.
Most of the test programs are launched by both run_vmtests.sh and
run_kselftest.sh:
hugepage-mmap
hugepage-shm
map_hugetlb
hugepage-mremap
hugepage-vmemmap
hugetlb-madvise
map_fixed_noreplace
gup_test
gup_longterm
uffd-unit-tests
uffd-stress
compaction_test
on-fault-limit
map_populate
mlock-random-test
mlock2-tests
mrelease_test
mremap_test
thuge-gen
virtual_address_range
va_high_addr_switch
mremap_dontunmap
hmm-tests
madv_populate
memfd_secret
ksm_tests
ksm_functional_tests
soft-dirty
cow
However, of this set, when launched by run_vmtests.sh, some of the
programs are invoked multiple times with different arguments. When
invoked by run_kselftest.sh, they are invoked without arguments (and as
a consequence, some fail immediately).
Some test programs are only launched by run_vmtests.sh:
test_vmalloc.sh
And some test programs and only launched by run_kselftest.sh:
khugepaged
migration
mkdirty
transhuge-stress
split_huge_page_test
mdwe_test
write_to_hugetlbfs
Furthermore, run_vmtests.sh is invoked by run_kselftest.sh, so in this
case all the test programs invoked by both scripts are run twice!
Needless to say, this is a bit of a mess. In the absence of fully
understanding the history here, it looks to me like the best solution is
to launch ALL test programs from run_vmtests.sh, and ONLY invoke
run_vmtests.sh from run_kselftest.sh. This way, we get full control over
the parameters, each program is only invoked the intended number of
times, and regardless of which script is used, the same tests get run in
the same way.
The only drawback is that if using run_kselftest.sh, it's top-level tap
result reporting reports only a single test and it fails if any of the
contained tests fail. I don't see this as a big deal though since we
still see all the nested reporting from multiple layers. The other issue
with this is that all of run_vmtests.sh must execute within a single
kselftest timeout period, so let's increase that to something more
suitable.
In the Makefile, TEST_GEN_PROGS will compile and install the tests and
will add them to the list of tests that run_kselftest.sh will run.
TEST_GEN_FILES will compile and install the tests but will not add them
to the test list. So let's move all the programs from TEST_GEN_PROGS to
TEST_GEN_FILES so that they are built but not executed by
run_kselftest.sh. Note that run_vmtests.sh is added to TEST_PROGS, which
means it ends up in the test list. (the lack of "_GEN" means it won't be
compiled, but simply copied).
Link: https://lkml.kernel.org/r/20230724082522.1202616-9-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Until now, transhuge-stress runs until its explicitly killed, so when
invoked by run_kselftest.sh, it would run until the test timeout, then it
would be killed and the test would be marked as failed.
Add a new, optional command line parameter that allows the user to specify
the duration in seconds that the program should run. The program exits
after this duration with a success (0) exit code. If the argument is
omitted the old behacvior remains.
On it's own, this doesn't quite solve our problem because run_kselftest.sh
does not allow passing parameters to the program under test. But we will
shortly move this to run_vmtests.sh, which does allow parameter passing.
Link: https://lkml.kernel.org/r/20230724082522.1202616-8-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The `migration` test currently has a number of robustness problems that
cause it to hang and leak resources.
Timeout: There are 3 tests, which each previously ran for 60 seconds.
However, the timeout in mm/settings for a single test binary was set to 45
seconds. So when run using run_kselftest.sh, the top level timeout would
trigger before the test binary was finished. Solve this by meeting in the
middle; each of the 3 tests now runs for 20 seconds (for a total of 60),
and the top level timeout is set to 90 seconds.
Leaking child processes: the `shared_anon` test fork()s some children but
then an ASSERT() fires before the test kills those children. The assert
causes immediate exit of the parent and leaking of the children.
Furthermore, if run using the run_kselftest.sh wrapper, the wrapper would
get stuck waiting for those children to exit, which never happens. Solve
this by setting the "parent death signal" to SIGHUP in the child, so that
the child is killed automatically if the parent dies.
With these changes, the test binary now runs to completion on arm64, with
2 tests passing and the `shared_anon` test failing.
Link: https://lkml.kernel.org/r/20230724082522.1202616-7-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
va_high_addr_switch has a mechanism to determine if the tests should be
run or skipped (supported_arch()). This currently returns unconditionally
true for arm64. However, va_high_addr_switch also requires a large
virtual address space for the tests to run, otherwise they spuriously
fail.
Since arm64 can only support VA > 48 bits when the page size is 64K, let's
decide whether we should skip the test suite based on the page size. This
reduces noise when running on 4K and 16K kernels.
Link: https://lkml.kernel.org/r/20230724082522.1202616-6-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
thuge-gen was previously only munmapping part of the mmapped buffer, which
caused us to run out of 1G huge pages for a later part of the test. Fix
this by munmapping the whole buffer. Based on the code, it looks like a
typo rather than an intention to keep some of the buffer mapped.
thuge-gen was also calling mmap with SHM_HUGETLB flag (bit 11 set), which
is actually MAP_DENYWRITE in mmap context. The man page says this flag is
ignored in modern kernels. I'm pretty sure from the context that the
author intended to pass the MAP_HUGETLB flag so I've fixed that up too.
Link: https://lkml.kernel.org/r/20230724082522.1202616-5-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
mrelease_test defaults to defining __NR_pidfd_open and
__NR_process_mrelease syscall numbers to -1, if they are not defined
anywhere else, and the suite would then be marked as skipped as a result.
arm64 (at least the stock debian toolchain that I'm using) requires
including <sys/syscall.h> to pull in the defines for these syscalls. So
let's add this header. With this in place, the test is passing on arm64.
Link: https://lkml.kernel.org/r/20230724082522.1202616-4-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
arm64 does not support the soft-dirty PTE bit. However, the `soft-dirty`
test suite is currently run unconditionally and therefore generates
spurious test failures on arm64. There are also some tests in
`madv_populate` which assume it is supported.
For `soft-dirty` lets disable the whole suite for arm64; it is no longer
built and run_vmtests.sh will skip it if its not present.
For `madv_populate`, we need a runtime mechanism so that the remaining
tests continue to be run. Unfortunately, the only way to determine if the
soft-dirty dirty bit is supported is to write to a page, then see if the
bit is set in /proc/self/pagemap. But the tests that we want to
conditionally execute are testing precicesly this. So if we introduced
this feature check, we could accedentally turn a real failure (on a system
that claims to support soft-dirty) into a skip. So instead, do the check
based on architecture; for arm64, we report that soft-dirty is not
supported.
Link: https://lkml.kernel.org/r/20230724082522.1202616-3-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "selftests/mm fixes for arm64", v3.
Given my on-going work on large anon folios and contpte mappings, I
decided it would be a good idea to start running mm selftests to help
guard against regressions. However, it soon became clear that I
couldn't get the suite to run cleanly on arm64 with a vanilla v6.5-rc1
kernel (perhaps I'm just doing it wrong??), so got stuck in a rabbit
hole trying to debug and fix all the issues. Some were down to
misconfigurations, but I also found a number of issues with the tests
and even a couple of issues with the kernel.
This patch (of 8):
The selftests runner pipes the test program's stdout to tap_prefix. The
presence of the pipe means that the test program sets its stdout to be
fully buffered (as aposed to line buffered when directly connected to the
terminal). The block buffering means that there is often content in the
buffer at fork() time, which causes the output to end up duplicated. This
was causing problems for mm:cow where test results were duplicated 20-30x.
Solve this by using `stdbuf`, when available to force the test program to
use line buffered mode. This means previously printf'ed results are
flushed out of the program before any fork().
Additionally, explicitly set line buffer mode in ksft_print_header(),
which means that all test programs that use the ksft framework will
benefit even if stdbuf is not present on the system.
[ryan.roberts@arm.com: add setvbuf() to set buffering mode]
Link: https://lkml.kernel.org/r/20230726070655.2713530-1-ryan.roberts@arm.com
Link: https://lkml.kernel.org/r/20230724082522.1202616-1-ryan.roberts@arm.com
Link: https://lkml.kernel.org/r/20230724082522.1202616-2-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add tests for the improvement made to read operation on HWPOISON
hugetlb page with different read granularities. For each chunk size,
three read scenarios are tested:
1. Simple regression test on read without HWPOISON.
2. Sequential read page by page should succeed until encounters the 1st
raw HWPOISON subpage.
3. After skip a raw HWPOISON subpage by lseek, read()s always succeed.
Link: https://lkml.kernel.org/r/20230713001833.3778937-5-jiaqiyan@google.com
Signed-off-by: Jiaqi Yan <jiaqiyan@google.com>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The test is pretty basic, and exercises UFFDIO_POISON straightforwardly.
We register a region with userfaultfd, in missing fault mode. For each
fault, we either UFFDIO_COPY a zeroed page (odd pages) or UFFDIO_POISON
(even pages). We do this mix to test "something like a real use case",
where guest memory would be some mix of poisoned and non-poisoned pages.
We read each page in the region, and assert that the odd pages are zeroed
as expected, and the even pages yield a SIGBUS as expected.
Why UFFDIO_COPY instead of UFFDIO_ZEROPAGE? Because hugetlb doesn't
support UFFDIO_ZEROPAGE, and we don't want to have special case code.
Link: https://lkml.kernel.org/r/20230707215540.2324998-9-axelrasmussen@google.com
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Gaosheng Cui <cuigaosheng1@huawei.com>
Cc: Huang, Ying <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Cc: Jiaqi Yan <jiaqiyan@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: T.J. Alumbaugh <talumbau@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: ZhangPeng <zhangpeng362@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Previously, we had "one fault handler to rule them all", which used
several branches to deal with all of the scenarios required by all of the
various tests.
In upcoming patches, I plan to add a new test, which has its own slightly
different fault handling logic. Instead of continuing to add cruft to the
existing fault handler, let's allow tests to define custom ones, separate
from other tests.
Link: https://lkml.kernel.org/r/20230707215540.2324998-8-axelrasmussen@google.com
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Gaosheng Cui <cuigaosheng1@huawei.com>
Cc: Huang, Ying <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Cc: Jiaqi Yan <jiaqiyan@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: T.J. Alumbaugh <talumbau@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: ZhangPeng <zhangpeng362@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add selftest for sysctl vm.memfd_noexec is 2
(MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED)
memfd_create(.., MFD_EXEC) should fail in this case.
Link: https://lkml.kernel.org/r/20230705063315.3680666-3-jeffxu@google.com
Reported-by: Dominique Martinet <asmadeus@codewreck.org>
Closes: https://lore.kernel.org/linux-mm/CABi2SkXUX_QqTQ10Yx9bBUGpN1wByOi_=gZU6WEy5a8MaQY3Jw@mail.gmail.com/T/
Signed-off-by: Jeff Xu <jeffxu@google.com>
Cc: Daniel Verkamp <dverkamp@chromium.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jorge Lucangeli Obes <jorgelo@chromium.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: kernel test robot <lkp@intel.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add a function test_unmerge_zero_page() to test the functionality on
unsharing and counting ksm-placed zero pages and counting of this patch
series.
test_unmerge_zero_page() actually contains four subjct test objects:
(1) whether the count of ksm zero pages can update correctly after merging;
(2) whether the count of ksm zero pages can update correctly after
unmerging by madvise(...MADV_UNMERGEABLE);
(3) whether the count of ksm zero pages can update correctly after
unmerging by triggering write fault.
(4) whether ksm zero pages are really unmerged.
Link: https://lkml.kernel.org/r/20230613030947.186089-1-yang.yang29@zte.com.cn
Signed-off-by: xu xin <xu.xin16@zte.com.cn>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Xiaokai Ran <ran.xiaokai@zte.com.cn>
Reviewed-by: Yang Yang <yang.yang29@zte.com.cn>
Cc: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: Xuexin Jiang <jiang.xuexin@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add a test to verify that when a memcg hits its limit in zswap, it doesn't
trigger an unwanted writeback that would result in pages not owned by that
memcg to be sent to disk, even if zswap isn't full. This was fixed by
commit 0bdf0efa180a("zswap: do not shrink if cgroup may not zswap").
Link: https://lkml.kernel.org/r/20230621153548.428093-4-cerasuolodomenico@gmail.com
Signed-off-by: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add a cgroup selftest that verifies memcg charging in zswap. The original
issue was that kmem bypass was applied to pages swapped out to zswap by
kswapd, resulting in zswapped memory not being charged. It was fixed by
commit cd08d80ecdac("mm: correctly charge compressed memory to its
memcg").
Link: https://lkml.kernel.org/r/20230621153548.428093-3-cerasuolodomenico@gmail.com
Signed-off-by: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "selftests: cgroup: add zswap test program".
This series adds 2 zswap related selftests that verify known and fixed
issues. A new dedicated test program (test_zswap) is proposed since the
test cases are specific to zswap and hosts specific helpers.
The first patch adds the (empty) test program, while the other 2 add an
actual test function each.
This patch (of 3):
Add empty cgroup-zswap self test scaffold program, test functions to be
added in the next commits.
Link: https://lkml.kernel.org/r/20230621153548.428093-1-cerasuolodomenico@gmail.com
Link: https://lkml.kernel.org/r/20230621153548.428093-2-cerasuolodomenico@gmail.com
Signed-off-by: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add test for expanding range in RCU mode. If we use the fast path of the
slot store to expand range in RCU mode, this test will fail.
Link: https://lkml.kernel.org/r/20230628073657.75314-3-zhangpeng.00@bytedance.com
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add a matrix for testing gup based on the current gup_test. Only run the
matrix when -a is specified because it's a bit slow.
It covers:
- Different types of huge pages: thp, hugetlb, or no huge page
- Permissions: Write / Read-only
- Fast-gup, with/without
- Types of the GUP: pin / gup / longterm pins
- Shared / Private memories
- GUP size: 1 / 512 / random page sizes
Link: https://lkml.kernel.org/r/20230628215310.73782-9-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kirill A . Shutemov <kirill@shutemov.name>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Allows to specify optional tests in run_vmtests.sh, where we can run time
consuming test matrix only when user specified "-a".
Link: https://lkml.kernel.org/r/20230628215310.73782-8-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kirill A . Shutemov <kirill@shutemov.name>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This test fails routinely in our prod testing environment, and I can
reproduce it locally as well.
The test allocates dcache inside a cgroup, then drops the memory limit
and checks that usage drops correspondingly. The reason it fails is
because dentries are freed with an RCU delay - a debugging sleep shows
that usage drops as expected shortly after.
Insert a 1s sleep after dropping the limit. This should be good
enough, assuming that machines running those tests are otherwise not
very busy.
Link: https://lkml.kernel.org/r/20230801135632.1768830-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
A missing break in kms_tests leads to kselftest hang when the parameter -s
is used.
In current code flow because of missing break in -s, -t parses args
spilled from -s and as -t accepts only valid values as 0,1 so any arg in
-s >1 or <0, gets in ksm_test failure
This went undetected since, before the addition of option -t, the next
case -M would immediately break out of the switch statement but that is no
longer the case
Add the missing break statement.
----Before----
./ksm_tests -H -s 100
Invalid merge type
----After----
./ksm_tests -H -s 100
Number of normal pages: 0
Number of huge pages: 50
Total size: 100 MiB
Total time: 0.401732682 s
Average speed: 248.922 MiB/s
Link: https://lkml.kernel.org/r/20230728163952.4634-1-ayush.jain3@amd.com
Fixes: 07115fcc15b4 ("selftests/mm: add new selftests for KSM")
Signed-off-by: Ayush Jain <ayush.jain3@amd.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Stefan Roesch <shr@devkernel.io>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently the pthread allocation for each array item is based on the size
of a pthread_t pointer and should be the size of the pthread_t structure,
so the allocation is under-allocating the correct size. Fix this by using
the size of each element in the pthreads array.
Static analysis cppcheck reported:
tools/testing/radix-tree/regression1.c:180:2: warning: Size of pointer
'threads' used instead of size of its data. [pointerSize]
Link: https://lkml.kernel.org/r/20230727160930.632674-1-colin.i.king@gmail.com
Fixes: 1366c37ed84b ("radix tree test harness")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probe fixes from Masami Hiramatsu:
- probe-events: add NULL check for some BTF API calls which can return
error code and NULL.
- ftrace selftests: check fprobe and kprobe event correctly. This fixes
a miss condition of the test command.
- kprobes: do not allow probing functions that start with "__cfi_" or
"__pfx_" since those are auto generated for kernel CFI and not
executed.
* tag 'probes-fixes-v6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
kprobes: Prohibit probing on CFI preamble symbol
selftests/ftrace: Fix to check fprobe event eneblement
tracing/probes: Fix to add NULL check for BTF APIs
|
|
Pull kvm fixes from Paolo Bonzini:
"x86:
- Do not register IRQ bypass consumer if posted interrupts not
supported
- Fix missed device interrupt due to non-atomic update of IRR
- Use GFP_KERNEL_ACCOUNT for pid_table in ipiv
- Make VMREAD error path play nice with noinstr
- x86: Acquire SRCU read lock when handling fastpath MSR writes
- Support linking rseq tests statically against glibc 2.35+
- Fix reference count for stats file descriptors
- Detect userspace setting invalid CR0
Non-KVM:
- Remove coccinelle script that has caused multiple confusion
("debugfs, coccinelle: check for obsolete DEFINE_SIMPLE_ATTRIBUTE()
usage", acked by Greg)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (21 commits)
KVM: selftests: Expand x86's sregs test to cover illegal CR0 values
KVM: VMX: Don't fudge CR0 and CR4 for restricted L2 guest
KVM: x86: Disallow KVM_SET_SREGS{2} if incoming CR0 is invalid
Revert "debugfs, coccinelle: check for obsolete DEFINE_SIMPLE_ATTRIBUTE() usage"
KVM: selftests: Verify stats fd is usable after VM fd has been closed
KVM: selftests: Verify stats fd can be dup()'d and read
KVM: selftests: Verify userspace can create "redundant" binary stats files
KVM: selftests: Explicitly free vcpus array in binary stats test
KVM: selftests: Clean up stats fd in common stats_test() helper
KVM: selftests: Use pread() to read binary stats header
KVM: Grab a reference to KVM for VM and vCPU stats file descriptors
selftests/rseq: Play nice with binaries statically linked against glibc 2.35+
Revert "KVM: SVM: Skip WRMSR fastpath on VM-Exit if next RIP isn't valid"
KVM: x86: Acquire SRCU read lock when handling fastpath MSR writes
KVM: VMX: Use vmread_error() to report VM-Fail in "goto" path
KVM: VMX: Make VMREAD error path play nice with noinstr
KVM: x86/irq: Conditionally register IRQ bypass consumer again
KVM: X86: Use GFP_KERNEL_ACCOUNT for pid_table in ipiv
KVM: x86: check the kvm_cpu_get_interrupt result before using it
KVM: x86: VMX: set irr_pending in kvm_apic_update_irr
...
|
|
Add coverage to x86's set_sregs_test to verify KVM rejects vendor-agnostic
illegal CR0 values, i.e. CR0 values whose legality doesn't depend on the
current VMX mode. KVM historically has neglected to reject bad CR0s from
userspace, i.e. would happily accept a completely bogus CR0 via
KVM_SET_SREGS{2}.
Punt VMX specific subtests to future work, as they would require quite a
bit more effort, and KVM gets coverage for CR0 checks in general through
other means, e.g. KVM-Unit-Tests.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230613203037.1968489-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Verify that VM and vCPU binary stats files are usable even after userspace
has put its last direct reference to the VM. This is a regression test
for a UAF bug where KVM didn't gift the stats files a reference to the VM.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230711230131.648752-8-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Expand the binary stats test to verify that a stats fd can be dup()'d
and read, to (very) roughly simulate userspace passing around the file.
Adding the dup() test is primarily an intermediate step towards verifying
that userspace can read VM/vCPU stats before _and_ after userspace closes
its copy of the VM fd; the dup() test itself is only mildly interesting.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230711230131.648752-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Verify that KVM doesn't artificially limit KVM_GET_STATS_FD to a single
file per VM/vCPU. There's no known use case for getting multiple stats
fds, but it should work, and more importantly creating multiple files will
make it easier to test that KVM correct manages VM refcounts for stats
files.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230711230131.648752-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
