Age | Commit message (Collapse) | Author | Files | Lines |
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/ti/icssg/icssg_prueth.c
net/mac80211/chan.c
89884459a0b9 ("wifi: mac80211: fix idle calculation with multi-link")
87f5500285fb ("wifi: mac80211: simplify ieee80211_assign_link_chanctx()")
https://lore.kernel.org/all/20240422105623.7b1fbda2@canb.auug.org.au/
net/unix/garbage.c
1971d13ffa84 ("af_unix: Suppress false-positive lockdep splat for spin_lock() in __unix_gc().")
4090fa373f0e ("af_unix: Replace garbage collection algorithm.")
drivers/net/ethernet/ti/icssg/icssg_prueth.c
drivers/net/ethernet/ti/icssg/icssg_common.c
4dcd0e83ea1d ("net: ti: icssg-prueth: Fix signedness bug in prueth_init_rx_chns()")
e2dc7bfd677f ("net: ti: icssg-prueth: Move common functions into a separate file")
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, wireless and bluetooth.
Nothing major, regression fixes are mostly in drivers, two more of
those are flowing towards us thru various trees. I wish some of the
changes went into -rc5, we'll try to keep an eye on frequency of PRs
from sub-trees.
Also disproportional number of fixes for bugs added in v6.4, strange
coincidence.
Current release - regressions:
- igc: fix LED-related deadlock on driver unbind
- wifi: mac80211: small fixes to recent clean up of the connection
process
- Revert "wifi: iwlwifi: bump FW API to 90 for BZ/SC devices", kernel
doesn't have all the code to deal with that version, yet
- Bluetooth:
- set power_ctrl_enabled on NULL returned by gpiod_get_optional()
- qca: fix invalid device address check, again
- eth: ravb: fix registered interrupt names
Current release - new code bugs:
- wifi: mac80211: check EHT/TTLM action frame length
Previous releases - regressions:
- fix sk_memory_allocated_{add|sub} for architectures where
__this_cpu_{add|sub}* are not IRQ-safe
- dsa: mv88e6xx: fix link setup for 88E6250
Previous releases - always broken:
- ip: validate dev returned from __in_dev_get_rcu(), prevent possible
null-derefs in a few places
- switch number of for_each_rcu() loops using call_rcu() on the
iterator to for_each_safe()
- macsec: fix isolation of broadcast traffic in presence of offload
- vxlan: drop packets from invalid source address
- eth: mlxsw: trap and ACL programming fixes
- eth: bnxt: PCIe error recovery fixes, fix counting dropped packets
- Bluetooth:
- lots of fixes for the command submission rework from v6.4
- qca: fix NULL-deref on non-serdev suspend
Misc:
- tools: ynl: don't ignore errors in NLMSG_DONE messages"
* tag 'net-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (88 commits)
af_unix: Suppress false-positive lockdep splat for spin_lock() in __unix_gc().
net: b44: set pause params only when interface is up
tls: fix lockless read of strp->msg_ready in ->poll
dpll: fix dpll_pin_on_pin_register() for multiple parent pins
net: ravb: Fix registered interrupt names
octeontx2-af: fix the double free in rvu_npc_freemem()
net: ethernet: ti: am65-cpts: Fix PTPv1 message type on TX packets
ice: fix LAG and VF lock dependency in ice_reset_vf()
iavf: Fix TC config comparison with existing adapter TC config
i40e: Report MFS in decimal base instead of hex
i40e: Do not use WQ_MEM_RECLAIM flag for workqueue
net: ti: icssg-prueth: Fix signedness bug in prueth_init_rx_chns()
net/mlx5e: Advertise mlx5 ethernet driver updates sk_buff md_dst for MACsec
macsec: Detect if Rx skb is macsec-related for offloading devices that update md_dst
ethernet: Add helper for assigning packet type when dest address does not match device address
macsec: Enable devices to advertise whether they update sk_buff md_dst during offloads
net: phy: dp83869: Fix MII mode failure
netfilter: nf_tables: honor table dormant flag from netdev release event path
eth: bnxt: fix counting packets discarded due to OOM and netpoll
igc: Fix LED-related deadlock on driver unbind
...
|
|
Currently conntrack_dump_flush test program always runs when passing
TEST_PROGS argument:
% make -C tools/testing/selftests TARGETS=net/netfilter \
TEST_PROGS=conntrack_ipip_mtu.sh run_tests
make: Entering [..]
TAP version 13
1..2 [..]
selftests: net/netfilter: conntrack_dump_flush [..]
Move away from TEST_CUSTOM_PROGS to avoid this. After this,
above command will only run the program specified in TEST_PROGS.
Link: https://lore.kernel.org/netdev/20240423191609.70c14c42@kernel.org/
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240424095824.5555-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The BPF sample building code looks a little bit spaghetti-ish
so move it out to its own Makefile snippet. Similar in the spirit
to how we include lib.mk. libynl will soon get a similar snippet.
There is a small change hiding in the move, the relative
paths (../../.., ../.. etc) are replaced with variables
from lib.mk such as top_srcdir and selfdir.
Link: https://lore.kernel.org/r/20240423183542.3807234-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The BPF sources moved with bpf_offload.py have a suffix of .bpf.c
which seems to be useful convention. Rename the 2 other BPF sources
we had. Use wildcard in the Makefile, since we can match all those
files easily now.
Link: https://lore.kernel.org/r/20240423183542.3807234-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With CONFIG_NETFILTER=n test passes instead of skip. Before:
./run_kselftest.sh -t net/netfilter:conntrack_dump_flush
[..]
# Starting 3 tests from 1 test cases.
# RUN conntrack_dump_flush.test_dump_by_zone ...
mnl_socket_open: Protocol not supported
[..]
ok 3 conntrack_dump_flush.test_flush_by_zone_default
# PASSED: 3 / 3 tests passed.
# Totals: pass:3 fail:0 xfail:0 xpass:0 skip:0 error:0
After:
mnl_socket_open: Protocol not supported
[..]
ok 3 conntrack_dump_flush.test_flush_by_zone_default # SKIP cannot open netlink_netfilter socket
# PASSED: 3 / 3 tests passed.
# Totals: pass:0 fail:0 xfail:0 xpass:0 skip:3 error:0
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240422103358.3511-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
nf_conntrack_udp_timeout sysctl only exist once conntrack module is loaded,
if this test runs standalone on a modular kernel sysctl setting fails,
this can result in test failure as udp conntrack entries expire too fast.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240422102546.2494-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use socat, like most of the other scripts already do. This also makes
the script complete slightly faster (3s -> 1s).
iperf3 establishes two connections (1 control connection, and 1+x
depending on test), so adjust expected counter values as well.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240423130604.7013-8-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
br_netfilter: If we can't add the needed initial nftables ruleset skip the
test, kernel doesn't support a required feature.
rpath: run a subset of the tests if possible, but make sure we return
the skip return value so they are marked appropriately by the kselftest
framework.
nft_audit.sh: provide version information when skipping, this should
help catching kernel problem (feature not available in kernel) vs.
userspace issue (parser doesn't support keyword).
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240423130604.7013-7-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
no functional changes intended except that test will now SKIP in
case kernel lacks bridge support and initial rule load failure provides
nft version information.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240423130604.7013-6-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that the test runs much faster, also re-run it with random MTU sizes
for the different link legs. flowtable should pass ip fragments, if
any, up to the normal forwarding path.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240423130604.7013-5-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
no functional changes intended.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240423130604.7013-4-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Tests fail on my workstation with netcat 110, instead of debugging+more
workarounds just remove this.
Tests will fall back to bash or socat.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240423130604.7013-3-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use busywait helper instead of unconditional sleep, reduces run time
from 6m to 2:30 on my system.
The busywait helper calls the function passed to it as argument; disable
the shellcheck test for unreachable code, it generates many (false)
warnings here.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240423130604.7013-2-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Wrap typical checks like whether given command used by the test
is available in helpers.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240420025237.3309296-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
More complex tests often have to spawn a background process,
like a server which will respond to requests or tcpdump.
Add support for creating such processes using the with keyword:
with bkg("my-daemon", ..):
# my-daemon is alive in this block
My initial thought was to add this support to cmd() directly
but it runs the command in the constructor, so by the time
we __enter__ it's too late to make sure we used "background=True".
Second useful helper transplanted from net_helper.sh is
wait_port_listen().
The test itself uses socat, which insists on v6 addresses
being wrapped in [], it's not the only command which requires
this format, so add the wrapped address to env. The hope
is to save test code from checking if address is v6.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240420025237.3309296-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
While writing tests with a lot more cases I got tired of having
to jump back and forth to add the name of the test to the ksft_run()
list. Most unittest frameworks do some name matching, e.g. assume
that functions with names starting with test_ are test cases.
Support similar flow in ksft_run(). Let the author list the desired
prefixes. globals() need to be passed explicitly, IDK how to work
around that.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240420025237.3309296-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a very simple test for testing with a remote system.
Both IPv4 and IPv6 connectivity is optional, later change
will add checks to skip tests based on available addresses.
Using netdevsim:
$ ./run_kselftest.sh -t drivers/net:ping.py
TAP version 13
1..1
# timeout set to 45
# selftests: drivers/net: ping.py
# KTAP version 1
# 1..2
# ok 1 ping.test_v4
# ok 2 ping.test_v6
# # Totals: pass:2 fail:0 xfail:0 xpass:0 skip:0 error:0
ok 1 selftests: drivers/net: ping.py
Command line SSH:
$ NETIF=virbr0 REMOTE_TYPE=ssh REMOTE_ARGS=root@192.168.122.123 \
LOCAL_V4=192.168.122.1 REMOTE_V4=192.168.122.123 \
./tools/testing/selftests/drivers/net/ping.py
KTAP version 1
1..2
ok 1 ping.test_v4
ok 2 ping.test_v6 # SKIP Test requires IPv6 connectivity
# Totals: pass:1 fail:0 xfail:1 xpass:0 skip:0 error:0
Existing devices placed in netns (and using net.config):
$ cat drivers/net/net.config
NETIF=veth0
REMOTE_TYPE=netns
REMOTE_ARGS=red
LOCAL_V4="192.168.1.1"
REMOTE_V4="192.168.1.2"
$ ./run_kselftest.sh -t drivers/net:ping.py
TAP version 13
1..1
# timeout set to 45
# selftests: drivers/net: ping.py
# KTAP version 1
# 1..2
# ok 1 ping.test_v4
# ok 2 ping.test_v6 # SKIP Test requires IPv6 connectivity
# # Totals: pass:1 fail:0 xfail:1 xpass:0 skip:0 error:0
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240420025237.3309296-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
endpoint
Nothing surprising here, hopefully. Wrap the variables from
the environment into a class or spawn a netdevsim based env
and pass it to the tests.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240420025237.3309296-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The tests with a remote end will use a different class,
for clarity, but will also need to parse the env.
So factor parsing the env out to a function.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240420025237.3309296-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Define the remote endpoint "model". To execute most meaningful device
driver tests we need to be able to communicate with a remote system,
and have it send traffic to the device under test.
Various test environments will have different requirements.
0) "Local" netdevsim-based testing can simply use net namespaces.
netdevsim supports connecting two devices now, to form a veth-like
construct.
1) Similarly on hosts with multiple NICs, the NICs may be connected
together with a loopback cable or internal device loopback.
One interface may be placed into separate netns, and tests
would proceed much like in the netdevsim case. Note that
the loopback config or the moving of one interface
into a netns is not expected to be part of selftest code.
2) Some systems may need to communicate with the remote endpoint
via SSH.
3) Last but not least environment may have its own custom communication
method.
Fundamentally we only need two operations:
- run a command remotely
- deploy a binary (if some tool we need is built as part of kselftests)
Wrap these two in a class. Use dynamic loading to load the Remote
class. This will allow very easy definition of other communication
methods without bothering upstream code base.
Stick to the "simple" / "no unnecessary abstractions" model for
referring to the remote endpoints. The host / remote object are
passed as an argument to the usual cmd() or ip() invocation.
For example:
ip("link show", json=True, host=remote)
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240420025237.3309296-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a test for dumping qstats device by device.
ksft framework grows a ksft_raises() helper, to be used
under with, which should be familiar to unittest users.
Link: https://lore.kernel.org/r/20240420023543.3300306-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
NLMSG_DONE contains an error code, it has to be extracted.
Prior to this change all dumps will end in success,
and in case of failure the result is silently truncated.
Fixes: e4b48ed460d3 ("tools: ynl: add a completely generic client")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240420020827.3288615-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a "--multi <do-op> <json>" command line to ynl that makes it
possible to add several operations to a single netlink request payload.
The --multi command line option is repeated for each operation.
This is used by the nftables family for transaction batches. For
example:
./tools/net/ynl/cli.py \
--spec Documentation/netlink/specs/nftables.yaml \
--multi batch-begin '{"res-id": 10}' \
--multi newtable '{"name": "test", "nfgen-family": 1}' \
--multi newchain '{"name": "chain", "table": "test", "nfgen-family": 1}' \
--multi batch-end '{"res-id": 10}'
[None, None, None, None]
It can also be used for bundling get requests:
./tools/net/ynl/cli.py \
--spec Documentation/netlink/specs/nftables.yaml \
--multi gettable '{"name": "test", "nfgen-family": 1}' \
--multi getchain '{"name": "chain", "table": "test", "nfgen-family": 1}' \
--output-json
[{"name": "test", "use": 1, "handle": 1, "flags": [],
"nfgen-family": 1, "version": 0, "res-id": 2},
{"table": "test", "name": "chain", "handle": 1, "use": 0,
"nfgen-family": 1, "version": 0, "res-id": 2}]
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240418104737.77914-4-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
NetlinkProtocol.decode() was looking up ops by response value which breaks
when it is used for extack decoding of directional ops. Instead, pass
the op to decode().
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240418104737.77914-3-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull kvm fixes from Paolo Bonzini:
"This is a bit on the large side, mostly due to two changes:
- Changes to disable some broken PMU virtualization (see below for
details under "x86 PMU")
- Clean up SVM's enter/exit assembly code so that it can be compiled
without OBJECT_FILES_NON_STANDARD. This fixes a warning "Unpatched
return thunk in use. This should not happen!" when running KVM
selftests.
Everything else is small bugfixes and selftest changes:
- Fix a mostly benign bug in the gfn_to_pfn_cache infrastructure
where KVM would allow userspace to refresh the cache with a bogus
GPA. The bug has existed for quite some time, but was exposed by a
new sanity check added in 6.9 (to ensure a cache is either
GPA-based or HVA-based).
- Drop an unused param from gfn_to_pfn_cache_invalidate_start() that
got left behind during a 6.9 cleanup.
- Fix a math goof in x86's hugepage logic for
KVM_SET_MEMORY_ATTRIBUTES that results in an array overflow
(detected by KASAN).
- Fix a bug where KVM incorrectly clears root_role.direct when
userspace sets guest CPUID.
- Fix a dirty logging bug in the where KVM fails to write-protect
SPTEs used by a nested guest, if KVM is using Page-Modification
Logging and the nested hypervisor is NOT using EPT.
x86 PMU:
- Drop support for virtualizing adaptive PEBS, as KVM's
implementation is architecturally broken without an obvious/easy
path forward, and because exposing adaptive PEBS can leak host LBRs
to the guest, i.e. can leak host kernel addresses to the guest.
- Set the enable bits for general purpose counters in
PERF_GLOBAL_CTRL at RESET time, as done by both Intel and AMD
processors.
- Disable LBR virtualization on CPUs that don't support LBR
callstacks, as KVM unconditionally uses
PERF_SAMPLE_BRANCH_CALL_STACK when creating the perf event, and
would fail on such CPUs.
Tests:
- Fix a flaw in the max_guest_memory selftest that results in it
exhausting the supply of ucall structures when run with more than
256 vCPUs.
- Mark KVM_MEM_READONLY as supported for RISC-V in
set_memory_region_test"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (30 commits)
KVM: Drop unused @may_block param from gfn_to_pfn_cache_invalidate_start()
KVM: selftests: Add coverage of EPT-disabled to vmx_dirty_log_test
KVM: x86/mmu: Fix and clarify comments about clearing D-bit vs. write-protecting
KVM: x86/mmu: Remove function comments above clear_dirty_{gfn_range,pt_masked}()
KVM: x86/mmu: Write-protect L2 SPTEs in TDP MMU when clearing dirty status
KVM: x86/mmu: Precisely invalidate MMU root_role during CPUID update
KVM: VMX: Disable LBR virtualization if the CPU doesn't support LBR callstacks
perf/x86/intel: Expose existence of callback support to KVM
KVM: VMX: Snapshot LBR capabilities during module initialization
KVM: x86/pmu: Do not mask LVTPC when handling a PMI on AMD platforms
KVM: x86: Snapshot if a vCPU's vendor model is AMD vs. Intel compatible
KVM: x86: Stop compiling vmenter.S with OBJECT_FILES_NON_STANDARD
KVM: SVM: Create a stack frame in __svm_sev_es_vcpu_run()
KVM: SVM: Save/restore args across SEV-ES VMRUN via host save area
KVM: SVM: Save/restore non-volatile GPRs in SEV-ES VMRUN via host save area
KVM: SVM: Clobber RAX instead of RBX when discarding spec_ctrl_intercepted
KVM: SVM: Drop 32-bit "support" from __svm_sev_es_vcpu_run()
KVM: SVM: Wrap __svm_sev_es_vcpu_run() with #ifdef CONFIG_KVM_AMD_SEV
KVM: SVM: Create a stack frame in __svm_vcpu_run() for unwinding
KVM: SVM: Remove a useless zeroing of allocated memory
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix wireguard loading failure on pre-Power10 due to Power10 crypto
routines
- Fix papr-vpd selftest failure due to missing variable initialization
- Avoid unnecessary get/put in spapr_tce_platform_iommu_attach_dev()
Thanks to Geetika Moolchandani, Jason Gunthorpe, Michal Suchánek, Nathan
Lynch, and Shivaprasad G Bhat.
* tag 'powerpc-6.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
selftests/powerpc/papr-vpd: Fix missing variable initialization
powerpc/crypto/chacha-p10: Fix failure on non Power10
powerpc/iommu: Refactor spapr_tce_platform_iommu_attach_dev()
|
|
Jakub reports the Makefile missed a few updates to make kselftest-install
work for the netfilter tests and points out that config file lacks many
dependencies such as VETH support.
The settings file (timeout 8m) is added for nft_concat_range.sh script
which can take several minutes to complete.
Fixes: 3f189349e52a ("selftests: netfilter: move to net subdir")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/all/20240412175413.04e5e616@kernel.org/
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240418152744.15105-13-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This testcase doesn't work if auditd is running, audit_logread will not
receive any data in that case.
Add a nftables feature test for the reset keyword and skip this test
if that fails.
While at it, do a few minor shellcheck cleanups.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240418152744.15105-12-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
shellcheck complains about missing "", so add those.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240418152744.15105-11-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
no functional change intended.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240418152744.15105-10-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
No functional change intended.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240418152744.15105-9-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
While at it: No need for iperf here, use socat.
This also reduces the script runtime.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240418152744.15105-8-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
no functional change intended.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240418152744.15105-7-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Intentional changes:
- Use socat instead of netcat
- Use a temporary file instead of pipe, else packets do not match
"-m string" rules, multiple writes to the pipe cause multiple packets,
but this needs only one to work.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240418152744.15105-6-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Also do shellcheck cleanups here, no functional changes intended.
When running tests via vng tool, the packetpath insertion test fails:
dd: failed to open '/dev/stdout': Device or resource busy
Just omit 'of=' and this will work as intended.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240418152744.15105-5-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
use checktool helper where applicable.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240418152744.15105-4-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
No functional change intended. Disable frequent shellcheck warnings wrt.
"unreachable" code, those helpers get called indirectly from busywait helper.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240418152744.15105-3-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
- switch to socat, like other tests
- use buswait helper to test once listener netns is ready
- do not generate multiple input test files, only generate
one and use cleanup hook to remove it, like other temporary files.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240418152744.15105-2-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Namhyung Kim:
"A random set of small bug fixes:
- Fix perf annotate TUI when used with data type profiling
- Work around BPF verifier about sighand lock checking
And a set of kernel header synchronization"
* tag 'perf-tools-fixes-for-v6.9-2024-04-19' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
tools/include: Sync arm64 asm/cputype.h with the kernel sources
tools/include: Sync asm-generic/bitops/fls.h with the kernel sources
tools/include: Sync x86 asm/msr-index.h with the kernel sources
tools/include: Sync x86 asm/irq_vectors.h with the kernel sources
tools/include: Sync x86 CPU feature headers with the kernel sources
tools/include: Sync uapi/sound/asound.h with the kernel sources
tools/include: Sync uapi/linux/kvm.h and asm/kvm.h with the kernel sources
tools/include: Sync uapi/linux/fs.h with the kernel sources
tools/include: Sync uapi/drm/i915_drm.h with the kernel sources
perf lock contention: Add a missing NULL check
perf annotate: Make sure to call symbol__annotate2() in TUI
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd fixes from Jason Gunthorpe:
"Two fixes for the selftests:
- CONFIG_IOMMUFD_TEST needs CONFIG_IOMMUFD_DRIVER to work
- The kconfig fragment sshould include fault injection so the fault
injection test can work"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd: Add config needed for iommufd_fail_nth
iommufd: Add missing IOMMUFD_DRIVER kconfig for the selftest
|
|
Test cases need to exit with non-zero status if they failed,
we currently don't do that:
# KTAP version 1
# 1..3
# # At /root/ksft-net-drv/drivers/net/./ping.py line 18:
# # Check failed 1 != 2
# not ok 1 ping.test_v4
# ok 2 ping.test_v6
# ok 3 ping.test_tcp
# # Totals: pass:2 fail:1 xfail:0 xpass:0 skip:0 error:0
ok 1 selftests: drivers/net: ping.py
^^^^
It's a bit tempting to make the exit part of ksft_run(),
but that only works well for very trivial setups. We can
revisit this later, if people forget to call ksft_exit().
Link: https://lore.kernel.org/r/20240417231146.2435572-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Totals currently only pay attention to exceptions, if check fails
(say ksft_eq()) the test case will be counted as pass:
# At /ksft/drivers/net/./ping.py line 18:
# Check failed 1 != 2
not ok 1 ping.test_v4
ok 2 ping.test_v6
ok 3 ping.test_tcp
# Totals: pass:3 fail:0 xfail:0 xpass:0 skip:0 error:0
^^^^^^^^^^^^^
Pay attention to the result.
Fixes: b86761ff6374 ("selftests: net: add scaffolding for Netlink tests in Python")
Link: https://lore.kernel.org/r/20240417231146.2435572-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
include/trace/events/rpcgss.h
386f4a737964 ("trace: events: cleanup deprecated strncpy uses")
a4833e3abae1 ("SUNRPC: Fix rpcgss_context trace event acceptor field")
Adjacent changes:
drivers/net/ethernet/intel/ice/ice_tc_lib.c
2cca35f5dd78 ("ice: Fix checking for unsupported keys on non-tunnel device")
784feaa65dfd ("ice: Add support for PFCP hardware offload in switchdev")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"A little calmer than usual, probably just the timing of sub-tree PRs.
Including fixes from netfilter.
Current release - regressions:
- inet: bring NLM_DONE out to a separate recv() again, fix user space
which assumes multiple recv()s will happen and gets blocked forever
- drv: mlx5:
- restore mistakenly dropped parts in register devlink flow
- use channel mdev reference instead of global mdev instance for
coalescing
- acquire RTNL lock before RQs/SQs activation/deactivation
Previous releases - regressions:
- net: change maximum number of UDP segments to 128, fix virtio
compatibility with Windows peers
- usb: ax88179_178a: avoid writing the mac address before first
reading
Previous releases - always broken:
- sched: fix mirred deadlock on device recursion
- netfilter:
- br_netfilter: skip conntrack input hook for promisc packets
- fixes removal of duplicate elements in the pipapo set backend
- various fixes for abort paths and error handling
- af_unix: don't peek OOB data without MSG_OOB
- drv: flower: fix fragment flags handling in multiple drivers
- drv: ravb: fix jumbo frames and packet stats accounting
Misc:
- kselftest_harness: fix Clang warning about zero-length format
- tun: limit printing rate when illegal packet received by tun dev"
* tag 'net-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (46 commits)
net: ethernet: ti: am65-cpsw-nuss: cleanup DMA Channels before using them
net: usb: ax88179_178a: avoid writing the mac address before first reading
net: ravb: Fix RX byte accounting for jumbo packets
net: ravb: Fix GbEth jumbo packet RX checksum handling
net: ravb: Allow RX loop to move past DMA mapping errors
net: ravb: Count packets instead of descriptors in R-Car RX path
net: ethernet: mtk_eth_soc: fix WED + wifi reset
net:usb:qmi_wwan: support Rolling modules
selftests: kselftest_harness: fix Clang warning about zero-length format
net/sched: Fix mirred deadlock on device recursion
netfilter: nf_tables: fix memleak in map from abort path
netfilter: nf_tables: restore set elements when delete set fails
netfilter: nf_tables: missing iterator type in lookup walk
s390/ism: Properly fix receive message buffer allocation
net: dsa: mt7530: fix port mirroring for MT7988 SoC switch
net: dsa: mt7530: fix mirroring frames received on local port
tun: limit printing rate when illegal packet received by tun dev
ice: Fix checking for unsupported keys on non-tunnel device
ice: tc: allow zero flags in parsing tc flower
ice: tc: check src_vsi in case of traffic from VF
...
|
|
Apparently it's more legal to pass the format as NULL, than
it is to use an empty string. Clang complains about empty
formats:
./../kselftest_harness.h:1207:30: warning: format string is empty
[-Wformat-zero-length]
1207 | diagnostic ? "%s" : "", diagnostic);
| ^~
1 warning generated.
Reported-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/all/20240409224256.1581292-1-seanjc@google.com
Fixes: 378193eff339 ("selftests: kselftest_harness: let PASS / FAIL provide diagnostic")
Tested-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/20240416151048.1682352-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Character sequences starting with `\` are interpreted by python as
escaped Unicode characters. However, they have other meaning in
regular expressions (e.g: "\d").
It seems Python >= 3.12 starts emitting a SyntaxWarning when these
escaped sequences are not recognized as valid Unicode characters.
An example of these warnings:
tools/testing/selftests/net/openvswitch/ovs-dpctl.py:505:
SyntaxWarning: invalid escape sequence '\d'
Fix all the warnings by flagging literals as raw strings.
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://lore.kernel.org/r/20240416090913.2028475-1-amorenoz@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
selftest build is fairly noisy, it's easy to miss warnings.
It's standard practice to add alternative messages in
the Makefile. I was grepping for existing solutions,
and found that bpf already has the right knobs.
Move them to lib.mk and adopt in net.
Convert the basic rules in lib.mk.
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20240411190534.444918-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Netfilter tests have been moved to a subdir under selftests/net by
patch series [1]. Fix the path in selftests/Makefile accordingly.
This helps fix the following error:
tools/testing/selftests$ make
...
make[1]: Entering directory 'tools/testing/selftests'
make[1]: *** netfilter: No such file or directory. Stop.
make[1]: Leaving directory 'tools/testing/selftests'
[1] https://lore.kernel.org/all/20240411233624.8129-1-fw@strlen.de/
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Yujie Liu <yujie.liu@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Real driver testing will obviously require enabling more
options, but will require more manual setup in the first
place. For CIs running purely software tests we need
to enable netdevsim.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240416004556.1618804-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|