summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)AuthorFilesLines
2020-10-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski5-29/+761
Minor conflicts in net/mptcp/protocol.h and tools/testing/selftests/net/Makefile. In both cases code was added on both sides in the same place so just keep both. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-15bpf, selftest: Fix flaky tcp_hdr_options test when adding addr to loMartin KaFai Lau2-26/+2
The tcp_hdr_options test adds a "::eB9F" addr to the lo dev. However, this non loopback address will have a race on ipv6 dad which may lead to EADDRNOTAVAIL error from time to time. Even nodad is used in the iproute2 command, there is still a race in when the route will be added. This will then lead to ENETUNREACH from time to time. To avoid the above, this patch uses the default loopback address "::1" to do the test. Fixes: ad2f8eb0095e ("bpf: selftests: Tcp header options") Reported-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20201012234940.1707941-1-kafai@fb.com
2020-10-15Merge tag 'char-misc-5.10-rc1' of ↵Linus Torvalds2-1/+92
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big set of char, misc, and other assorted driver subsystem patches for 5.10-rc1. There's a lot of different things in here, all over the drivers/ directory. Some summaries: - soundwire driver updates - habanalabs driver updates - extcon driver updates - nitro_enclaves new driver - fsl-mc driver and core updates - mhi core and bus updates - nvmem driver updates - eeprom driver updates - binder driver updates and fixes - vbox minor bugfixes - fsi driver updates - w1 driver updates - coresight driver updates - interconnect driver updates - misc driver updates - other minor driver updates All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (396 commits) binder: fix UAF when releasing todo list docs: w1: w1_therm: Fix broken xref, mistakes, clarify text misc: Kconfig: fix a HISI_HIKEY_USB dependency LSM: Fix type of id parameter in kernel_post_load_data prototype misc: Kconfig: add a new dependency for HISI_HIKEY_USB firmware_loader: fix a kernel-doc markup w1: w1_therm: make w1_poll_completion static binder: simplify the return expression of binder_mmap test_firmware: Test partial read support firmware: Add request_partial_firmware_into_buf() firmware: Store opt_flags in fw_priv fs/kernel_file_read: Add "offset" arg for partial reads IMA: Add support for file reads without contents LSM: Add "contents" flag to kernel_read_file hook module: Call security_kernel_post_load_data() firmware_loader: Use security_post_load_data() LSM: Introduce kernel_post_load_data() hook fs/kernel_read_file: Add file_size output argument fs/kernel_read_file: Switch buffer size arg to size_t fs/kernel_read_file: Remove redundant size argument ...
2020-10-15Merge tag 'staging-5.10-rc1' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging / IIO driver updates from Greg KH: "Here is the large set of staging and IIO driver updates for 5.10-rc1. Included in here are: - new IIO drivers - new IIO driver frameworks - various IIO driver fixes and updates - IIO device tree conversions to yaml - so many minor staging driver coding style cleanups - most cdev driver moved out of staging - no staging drivers added or removed Full details are in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'staging-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (476 commits) staging: comedi: check validity of wMaxPacketSize of usb endpoints found staging: wfx: improve robustness of wfx_get_hw_rate() staging: wfx: drop unicode characters from strings staging: wfx: gpiod_get_value() can return an error staging: wfx: increase robustness of hif_generic_confirm() staging: wfx: wfx_init_common() returns NULL on error staging: wfx: standardize the error when vif does not exist staging: wfx: check memory allocation staging: wfx: improve error handling of hif_join() staging: dpaa2-switch: add a dpaa2_switch prefix to all functions in ethsw.c staging: dpaa2-switch: add a dpaa2_switch_ prefix to all functions in ethsw-ethtool.c staging: rtl8188eu: Fix long lines dt-bindings: staging: wfx: silabs,wfx yaml conversion staging: wfx: update copyrights dates staging: wfx: fix QoS priority for slow buses staging: wfx: fix BA sessions for older firmwares staging: wfx: remove remaining code of 'secure link' feature staging: wfx: fix handling of MMIC error staging: vchiq: Fix list_for_each exit tests staging: greybus: use __force when assigning __u8 value to snd_ctl_elem_type_t ...
2020-10-15selftests/ftrace: Add test case for synthetic event syntax errorsTom Zanussi1-0/+19
Add a selftest that verifies that the syntax error messages and caret positions are correct for most of the possible synthetic event syntax error cases. Link: https://lkml.kernel.org/r/af611928ce79f86eaf0af8654f1d7802d5cc21ff.1602598160.git.zanussi@kernel.org Tested-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Tom Zanussi <zanussi@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-10-15selftests/ftrace: Change synthetic event name for inter-event-combined testTom Zanussi1-4/+4
This test uses waking+wakeup_latency as an event name, which doesn't make sense since it includes an operator. Illegal names are now detected by the synthetic event command parsing, which causes this test to fail. Change the name to 'waking_plus_wakeup_latency' to prevent this. Link: https://lkml.kernel.org/r/a1ee2f76ff28ef7166fb788ca8be968887808920.1602598160.git.zanussi@kernel.org Fixes: f06eec4d0f2c (selftests: ftrace: Add inter-event hist triggers testcases) Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Tested-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Tom Zanussi <zanussi@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-10-15perf c2c: Update documentation for metrics reorganizationLeo Yan1-16/+18
The output format for metrics has been reorganized, update documentation to reflect the changes for it. Signed-off-by: Leo Yan <leo.yan@linaro.org> Cc: Al Grant <al.grant@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Ian Rogers <irogers@google.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Joe Mario <jmario@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20201015144548.18482-10-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-10-15bpf: Fix register equivalence tracking.Alexei Starovoitov1-0/+26
The 64-bit JEQ/JNE handling in reg_set_min_max() was clearing reg->id in either true or false branch. In the case 'if (reg->id)' check was done on the other branch the counter part register would have reg->id == 0 when called into find_equal_scalars(). In such case the helper would incorrectly identify other registers with id == 0 as equivalent and propagate the state incorrectly. Fix it by preserving ID across reg_set_min_max(). In other words any kind of comparison operator on the scalar register should preserve its ID to recognize: r1 = r2 if (r1 == 20) { #1 here both r1 and r2 == 20 } else if (r2 < 20) { #2 here both r1 and r2 < 20 } The patch is addressing #1 case. The #2 was working correctly already. Fixes: 75748837b7e5 ("bpf: Propagate scalar ranges through register assignments.") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Tested-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20201014175608.1416-1-alexei.starovoitov@gmail.com
2020-10-15perf c2c: Add metrics "RMT Load Hit"Leo Yan1-50/+2
The metrics "LLC Ld Miss" and "Load Dram" overlap with each other for accouting items: "LLC Ld Miss" = "lcl_dram" + "rmt_dram" + "rmt_hit" + "rmt_hitm" "Load Dram" = "lcl_dram" + "rmt_dram" Furthermore, the metrics "LLC Ld Miss" is not directive to show statistics due to it contains summary value and cannot give out breakdown details. For this reason, add a new metrics "RMT Load Hit" which is used to present the remote cache hit; it contains two items: "RMT Load Hit" = remote hit ("rmt_hit") + remote hitm ("rmt_hitm") As result, the metrics "LLC Ld Miss" is perfectly divided into two metrics "RMT Load Hit" and "Load Dram". It's not necessary to keep metrics "LLC Ld Miss", so remove it. Before: # ----------- Cacheline ---------- Tot ------- Load Hitm ------- Total Total Total ---- Stores ---- ----- Core Load Hit ----- - LLC Load Hit -- LLC --- Load Dram ---- # Index Address Node PA cnt Hitm Total LclHitm RmtHitm records Loads Stores L1Hit L1Miss FB L1 L2 LclHit LclHitm Ld Miss Lcl Rmt # ..... .................. .... ...... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ........ ....... ....... ........ ........ # 0 0x55f07d580100 0 1499 85.89% 481 481 0 7243 3879 3364 2599 765 548 2615 66 169 481 0 0 0 1 0x55f07d580080 0 1 13.93% 78 78 0 664 664 0 0 0 187 361 27 11 78 0 0 0 2 0x55f07d5800c0 0 1 0.18% 1 1 0 405 405 0 0 0 131 0 10 263 1 0 0 0 After: # ----------- Cacheline ---------- Tot ------- Load Hitm ------- Total Total Total ---- Stores ---- ----- Core Load Hit ----- - LLC Load Hit -- - RMT Load Hit -- --- Load Dram ---- # Index Address Node PA cnt Hitm Total LclHitm RmtHitm records Loads Stores L1Hit L1Miss FB L1 L2 LclHit LclHitm RmtHit RmtHitm Lcl Rmt # ..... .................. .... ...... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ........ ....... ........ ....... ........ ........ # 0 0x55f07d580100 0 1499 85.89% 481 481 0 7243 3879 3364 2599 765 548 2615 66 169 481 0 0 0 0 1 0x55f07d580080 0 1 13.93% 78 78 0 664 664 0 0 0 187 361 27 11 78 0 0 0 0 2 0x55f07d5800c0 0 1 0.18% 1 1 0 405 405 0 0 0 131 0 10 263 1 0 0 0 0 Signed-off-by: Leo Yan <leo.yan@linaro.org> Tested-by: Joe Mario <jmario@redhat.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Link: https://lore.kernel.org/r/20201014050921.5591-9-leo.yan@linaro.org
2020-10-15perf c2c: Correct LLC load hit metricsLeo Yan1-2/+2
"rmt_hit" is accounted into two metrics: one is accounted into the metrics "LLC Ld Miss" (see the function llc_miss() for calculation "llcmiss"); and it's accounted into metrics "LLC Load Hit". Thus, for the literal meaning, it is contradictory that "rmt_hit" is accounted for both "LLC Ld Miss" (LLC miss) and "LLC Load Hit" (LLC hit). Thus this is easily to introduce confusion: "LLC Load Hit" gives impression that all items belong to it are LLC hit; in fact "rmt_hit" is LLC miss and remote cache hit. To give out clear semantics for metric "LLC Load Hit", "rmt_hit" is moved out from it and changes "LLC Load Hit" to contain two items: LLC Load Hit = LLC's hit ("ld_llchit") + LLC's hitm ("lcl_hitm") For output alignment, adjusts the header for "LLC Load Hit". Signed-off-by: Leo Yan <leo.yan@linaro.org> Tested-by: Joe Mario <jmario@redhat.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Link: https://lore.kernel.org/r/20201014050921.5591-8-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-10-15perf c2c: Change header for LLC local hitLeo Yan1-1/+1
Replace the header string "Lcl" with "LclHit", which is more explicit to express the event type is LLC local hit. Signed-off-by: Leo Yan <leo.yan@linaro.org> Tested-by: Joe Mario <jmario@redhat.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Link: https://lore.kernel.org/r/20201014050921.5591-7-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-10-15perf c2c: Use more explicit headers for HITMLeo Yan1-4/+4
Local and remote HITM use the headers 'Lcl' and 'Rmt' respectively, suppose if we want to extend the tool to display these two dimensions under any one metrics, users cannot understand the semantics if only based on the header string 'Lcl' or 'Rmt'. To explicit express the meaning for HITM items, this patch changes the headers string as "LclHitm" and "RmtHitm", the strings are more readable and this allows to extend metrics for using HITM items. Signed-off-by: Leo Yan <leo.yan@linaro.org> Tested-by: Joe Mario <jmario@redhat.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Link: https://lore.kernel.org/r/20201014050921.5591-6-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-10-15perf c2c: Change header from "LLC Load Hitm" to "Load Hitm"Leo Yan1-1/+1
The metrics "LLC Load Hitm" contains two items: one is "local Hitm" and another is "remote Hitm". "local Hitm" means: L3 HIT and was serviced by another processor core with a cross core snoop where modified copies were found; it's no doubt that "local Hitm" belongs to LLC access. But for "remote Hitm", based on the code in util/mem-events, it's the event for remote cache HIT and was serviced by another processor core with modified copies. Thus the remote Hitm is a remote cache's hit and actually it's LLC load miss. Now the display format gives users the impression that "local Hitm" and "remote Hitm" both belong to the LLC load, but this is not the fact as described. This patch changes the header from "LLC Load Hitm" to "Load Hitm", this can avoid the give the wrong impression that all Hitm belong to LLC. Signed-off-by: Leo Yan <leo.yan@linaro.org> Tested-by: Joe Mario <jmario@redhat.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Link: https://lore.kernel.org/r/20201014050921.5591-5-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-10-15perf c2c: Organize metrics based on memory hierarchyLeo Yan1-3/+3
The metrics are not organized based on memory hierarchy, e.g. the tool doesn't organize the metrics order based on memory nodes from the close node (e.g. L1/L2 cache) to far node (e.g. L3 cache and DRAM). To output metrics with more friendly form, this patch refines the metrics order based on memory hierarchy: "Core Load Hit" => "LLC Load Hit" => "LLC Ld Miss" => "Load Dram" Signed-off-by: Leo Yan <leo.yan@linaro.org> Tested-by: Joe Mario <jmario@redhat.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Link: https://lore.kernel.org/r/20201014050921.5591-4-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-10-15perf c2c: Display "Total Stores" as a standalone metricsLeo Yan1-6/+7
The total stores is displayed under the metrics "Store Reference", to output the same format with total records and all loads, extract the total stores number as a standalone metrics "Total Stores". After this patch, the tool shows the summary numbers ("Total records", "Total loads", "Total Stores") in the unified form. Before: # ----------- Cacheline ---------- Tot ----- LLC Load Hitm ----- Total Total ---- Store Reference ---- --- Load Dram ---- LLC ----- Core Load Hit ----- -- LLC Load Hit -- # Index Address Node PA cnt Hitm Total Lcl Rmt records Loads Total L1Hit L1Miss Lcl Rmt Ld Miss FB L1 L2 Llc Rmt # ..... .................. .... ...... ....... ....... ....... ....... ....... ....... ....... ....... ....... ........ ........ ....... ....... ....... ....... ........ ........ # 0 0x55f07d580100 0 1499 85.89% 481 481 0 7243 3879 3364 2599 765 0 0 0 548 2615 66 169 0 1 0x55f07d580080 0 1 13.93% 78 78 0 664 664 0 0 0 0 0 0 187 361 27 11 0 2 0x55f07d5800c0 0 1 0.18% 1 1 0 405 405 0 0 0 0 0 0 131 0 10 263 0 After: # ----------- Cacheline ---------- Tot ----- LLC Load Hitm ----- Total Total Total ---- Stores ---- --- Load Dram ---- LLC ----- Core Load Hit ----- -- LLC Load Hit -- # Index Address Node PA cnt Hitm Total Lcl Rmt records Loads Stores L1Hit L1Miss Lcl Rmt Ld Miss FB L1 L2 Llc Rmt # ..... .................. .... ...... ....... ....... ....... ....... ....... ....... ....... ....... ....... ........ ........ ....... ....... ....... ....... ........ ........ # 0 0x55f07d580100 0 1499 85.89% 481 481 0 7243 3879 3364 2599 765 0 0 0 548 2615 66 169 0 1 0x55f07d580080 0 1 13.93% 78 78 0 664 664 0 0 0 0 0 0 187 361 27 11 0 2 0x55f07d5800c0 0 1 0.18% 1 1 0 405 405 0 0 0 0 0 0 131 0 10 263 0 Signed-off-by: Leo Yan <leo.yan@linaro.org> Tested-by: Joe Mario <jmario@redhat.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Link: https://lore.kernel.org/r/20201014050921.5591-3-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-10-15perf c2c: Display the total numbers continuouslyLeo Yan1-2/+2
To view the statistics with "breakdown" mode, it's good to show the summary numbers for the total records, all stores and all loads, then the sequential conlumns can be used to break into more detailed items. To achieve this purpose, this patch displays the summary numbers for records/stores/loads continuously and places them before breakdown items, this can allow uses to easily read the summarized statistics. Signed-off-by: Leo Yan <leo.yan@linaro.org> Tested-by: Joe Mario <jmario@redhat.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Link: https://lore.kernel.org/r/20201014050921.5591-2-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-10-15parisc: Add MAP_UNINITIALIZED defineHelge Deller1-1/+0
We will not allow unitialized anon mmaps, but we need this define to prevent build errors, e.g. the debian foot package. Suggested-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Helge Deller <deller@gmx.de>
2020-10-15selftests: Add VRF route leaking testsMichael Jeanson2-0/+627
The objective of the tests is to check that ICMP errors generated while crossing between VRFs are properly routed back to the source host. The first ttl test sends a ping with a ttl of 1 from h1 to h2 and parses the output of the command to check that a ttl expired error is received. The second ttl test runs traceroute from h1 to h2 and parses the output to check for a hop on r1. The mtu test sends a ping with a payload of 1450 from h1 to h2, through r1 which has an interface with a mtu of 1400 and parses the output of the command to check that a fragmentation needed error is received. [ The IPv6 MTU test still fails with the symmetric routing setup. It appears to be caused by source address selection picking ::1. Fixing this is beyond the scope of this series. ] Signed-off-by: Michael Jeanson <mjeanson@efficios.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-15Merge tag 'threads-v5.10' of ↵Linus Torvalds2-175/+133
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull pidfd updates from Christian Brauner: "This introduces a new extension to the pidfd_open() syscall. Users can now raise the new PIDFD_NONBLOCK flag to support non-blocking pidfd file descriptors. This has been requested for uses in async process management libraries such as async-pidfd in Rust. Ever since the introduction of pidfds and more advanced async io various programming languages such as Rust have grown support for async event libraries. These libraries are created to help build epoll-based event loops around file descriptors. A common pattern is to automatically make all file descriptors they manage to O_NONBLOCK. For such libraries the EAGAIN error code is treated specially. When a function is called that returns EAGAIN the function isn't called again until the event loop indicates the the file descriptor is ready. Supporting EAGAIN when waiting on pidfds makes such libraries just work with little effort. This introduces a new flag PIDFD_NONBLOCK that is equivalent to O_NONBLOCK. This follows the same patterns we have for other (anon inode) file descriptors such as EFD_NONBLOCK, IN_NONBLOCK, SFD_NONBLOCK, TFD_NONBLOCK and the same for close-on-exec flags. Passing a non-blocking pidfd to waitid() currently has no effect, i.e. is not supported. There are users which would like to use waitid() on pidfds that are O_NONBLOCK and mix it with pidfds that are blocking and both pass them to waitid(). The expected behavior is to have waitid() return -EAGAIN for non-blocking pidfds and to block for blocking pidfds without needing to perform any additional checks for flags set on the pidfd before passing it to waitid(). Non-blocking pidfds will return EAGAIN from waitid() when no child process is ready yet. Returning -EAGAIN for non-blocking pidfds makes it easier for event loops that handle EAGAIN specially. It also makes the API more consistent and uniform. In essence, waitid() is treated like a read on a non-blocking pidfd or a recvmsg() on a non-blocking socket. With the addition of support for non-blocking pidfds we support the same functionality that sockets do. For sockets() recvmsg() supports MSG_DONTWAIT for pidfds waitid() supports WNOHANG. Both flags are per-call options. In contrast non-blocking pidfds and non-blocking sockets are a setting on an open file description affecting all threads in the calling process as well as other processes that hold file descriptors referring to the same open file description. Both behaviors, per call and per open file description, have genuine use-cases. The interaction with the WNOHANG flag is documented as follows: - If a non-blocking pidfd is passed and WNOHANG is not raised we simply raise the WNOHANG flag internally. When do_wait() returns indicating that there are eligible child processes but none have exited yet we set EAGAIN. If no child process exists we continue returning ECHILD. - If a non-blocking pidfd is passed and WNOHANG is raised waitid() will continue returning 0, i.e. it will not set EAGAIN. This ensure backwards compatibility with applications passing WNOHANG explicitly with pidfds" * tag 'threads-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: tests: remove O_NONBLOCK before waiting for WSTOPPED tests: add waitid() tests for non-blocking pidfds tests: port pidfd_wait to kselftest harness pidfd: support PIDFD_NONBLOCK in pidfd_open() exit: support non-blocking pidfds
2020-10-15Merge tag 'kernel-clone-v5.9' of ↵Linus Torvalds16-35/+35
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull kernel_clone() updates from Christian Brauner: "During the v5.9 merge window we reworked the process creation codepaths across multiple architectures. After this work we were only left with the _do_fork() helper based on the struct kernel_clone_args calling convention. As was pointed out _do_fork() isn't valid kernelese especially for a helper that isn't just static. This series removes the _do_fork() helper and introduces the new kernel_clone() helper. The process creation cleanup didn't change the name to something more reasonable mainly because _do_fork() was used in quite a few places. So sending this as a separate series seemed the better strategy. I originally intended to send this early in the v5.9 development cycle after the merge window had closed but given that this was touching quite a few places I decided to defer this until the v5.10 merge window" * tag 'kernel-clone-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: sched: remove _do_fork() tracing: switch to kernel_clone() kgdbts: switch to kernel_clone() kprobes: switch to kernel_clone() x86: switch to kernel_clone() sparc: switch to kernel_clone() nios2: switch to kernel_clone() m68k: switch to kernel_clone() ia64: switch to kernel_clone() h8300: switch to kernel_clone() fork: introduce kernel_clone()
2020-10-15Merge tag 'linux-kselftest-fixes-5.10-rc1' of ↵Linus Torvalds5-128/+215
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest updates from Shuah Khan: - a selftests harness fix to flush stdout before forking to avoid parent and child printing duplicates messages. This is evident when test output is redirected to a file. - a tools/ wide change to avoid comma separated statements from Joe Perches. This fix spans tools/lib, tools/power/cpupower, and selftests. * tag 'linux-kselftest-fixes-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: tools: Avoid comma separated statements selftests/harness: Flush stdout before forking
2020-10-14Merge tag 'acpi-5.10-rc1' of ↵Linus Torvalds2-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "These add support for generic initiator-only proximity domains to the ACPI NUMA code and the architectures using it, clean up some non-ACPICA code referring to debug facilities from ACPICA, reduce the overhead related to accessing GPE registers, add a new DPTF (Dynamic Power and Thermal Framework) participant driver, update the ACPICA code in the kernel to upstream revision 20200925, add a new ACPI backlight whitelist entry, fix a few assorted issues and clean up some code. Specifics: - Add support for generic initiator-only proximity domains to the ACPI NUMA code and the architectures using it (Jonathan Cameron) - Clean up some non-ACPICA code referring to debug facilities from ACPICA that are not actually used in there (Hanjun Guo) - Add new DPTF driver for the PCH FIVR participant (Srinivas Pandruvada) - Reduce overhead related to accessing GPE registers in ACPICA and the OS interface layer and make it possible to access GPE registers using logical addresses if they are memory-mapped (Rafael Wysocki) - Update the ACPICA code in the kernel to upstream revision 20200925 including changes as follows: + Add predefined names from the SMBus sepcification (Bob Moore) + Update acpi_help UUID list (Bob Moore) + Return exceptions for string-to-integer conversions in iASL (Bob Moore) + Add a new "ALL <NameSeg>" debugger command (Bob Moore) + Add support for 64 bit risc-v compilation (Colin Ian King) + Do assorted cleanups (Bob Moore, Colin Ian King, Randy Dunlap) - Add new ACPI backlight whitelist entry for HP 635 Notebook (Alex Hung) - Move TPS68470 OpRegion driver to drivers/acpi/pmic/ and split out Kconfig and Makefile specific for ACPI PMIC (Andy Shevchenko) - Clean up the ACPI SoC driver for AMD SoCs (Hanjun Guo) - Add missing config_item_put() to fix refcount leak (Hanjun Guo) - Drop lefrover field from struct acpi_memory_device (Hanjun Guo) - Make the ACPI extlog driver check for RDMSR failures (Ben Hutchings) - Fix handling of lid state changes in the ACPI button driver when input device is closed (Dmitry Torokhov) - Fix several assorted build issues (Barnabás Pőcze, John Garry, Nathan Chancellor, Tian Tao) - Drop unused inline functions and reduce code duplication by using kobj_to_dev() in the NFIT parsing code (YueHaibing, Wang Qing) - Serialize tools/power/acpi Makefile (Thomas Renninger)" * tag 'acpi-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (64 commits) ACPICA: Update version to 20200925 Version 20200925 ACPICA: Remove unnecessary semicolon ACPICA: Debugger: Add a new command: "ALL <NameSeg>" ACPICA: iASL: Return exceptions for string-to-integer conversions ACPICA: acpi_help: Update UUID list ACPICA: Add predefined names found in the SMBus sepcification ACPICA: Tree-wide: fix various typos and spelling mistakes ACPICA: Drop the repeated word "an" in a comment ACPICA: Add support for 64 bit risc-v compilation ACPI: button: fix handling lid state changes when input device closed tools/power/acpi: Serialize Makefile ACPI: scan: Replace ACPI_DEBUG_PRINT() with pr_debug() ACPI: memhotplug: Remove 'state' from struct acpi_memory_device ACPI / extlog: Check for RDMSR failure ACPI: Make acpi_evaluate_dsm() prototype consistent docs: mm: numaperf.rst Add brief description for access class 1. node: Add access1 class to represent CPU to memory characteristics ACPI: HMAT: Fix handling of changes from ACPI 6.2 to ACPI 6.3 ACPI: Let ACPI know we support Generic Initiator Affinity Structures x86: Support Generic Initiator only proximity domains ...
2020-10-14Merge tag 'platform-drivers-x86-v5.10-1' of ↵Linus Torvalds3-15/+18
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver updates from Hans de Goede: "Rather calm cycle for x86 platform drivers, all these have been in for-next for a couple of days with no bot complaints. Highlights: - PMC TigerLake fixes and new RocketLake support - various small fixes / updates in other drivers/tools" * tag 'platform-drivers-x86-v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: MAINTAINERS: update X86 PLATFORM DRIVERS entry with new kernel.org git repo platform/x86: mlx-platform: Add capability field to platform FAN description platform_data/mlxreg: Extend core platform structure platform_data/mlxreg: Update module license platform/x86: mlx-platform: Remove PSU EEPROM configuration MAINTAINERS: Update maintainers for pmc_core driver platform/x86: intel_pmc_core: fix: Replace dev_dbg macro with dev_info() platform/x86: intel_pmc_core: Add Intel RocketLake (RKL) support platform/x86: intel_pmc_core: Clean up: Remove the duplicate comments and reorganize platform/x86: intel_pmc_core: Fix the slp_s0 counter displayed value platform/x86: intel_pmc_core: Fix TigerLake power gating status map platform/x86: pmc_core: Use descriptive names for LPM registers tools/power/x86/intel-speed-select: Update version for v5.10 tools/power/x86/intel-speed-select: Fix missing base-freq core IDs platform/x86: hp-wmi: add support for thermal policy
2020-10-14perf bench: Use condition variables in numa.Ian Rogers1-21/+46
The existing approach to synchronization between threads in the numa benchmark is unbalanced mutexes. This synchronization causes thread sanitizer to warn of locks being taken twice on a thread without an unlock, as well as unlocks with no corresponding locks. This change replaces the synchronization with more regular condition variables. While this fixes one class of thread sanitizer warnings, there still remain warnings of data races due to threads reading and writing shared memory without any atomics. Committer testing: Basic run on a non-NUMA machine. # perf bench numa # List of available benchmarks for collection 'numa': mem: Benchmark for NUMA workloads all: Run all NUMA benchmarks # perf bench numa all # Running numa/mem benchmark... # Running main, "perf bench numa numa-mem" # # Running test on: Linux five 5.8.12-200.fc32.x86_64 #1 SMP Mon Sep 28 12:17:31 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux # # Running RAM-bw-local, "perf bench numa mem -p 1 -t 1 -P 1024 -C 0 -M 0 -s 20 -zZq --thp 1 --no-data_rand_walk" 20.076 secs slowest (max) thread-runtime 20.000 secs fastest (min) thread-runtime 20.073 secs average thread-runtime 0.190 % difference between max/avg runtime 241.828 GB data processed, per thread 241.828 GB data processed, total 0.083 nsecs/byte/thread runtime 12.045 GB/sec/thread speed 12.045 GB/sec total speed # Running RAM-bw-local-NOTHP, "perf bench numa mem -p 1 -t 1 -P 1024 -C 0 -M 0 -s 20 -zZq --thp 1 --no-data_rand_walk --thp -1" 20.045 secs slowest (max) thread-runtime 20.000 secs fastest (min) thread-runtime 20.014 secs average thread-runtime 0.111 % difference between max/avg runtime 234.304 GB data processed, per thread 234.304 GB data processed, total 0.086 nsecs/byte/thread runtime 11.689 GB/sec/thread speed 11.689 GB/sec total speed # Running RAM-bw-remote, "perf bench numa mem -p 1 -t 1 -P 1024 -C 0 -M 1 -s 20 -zZq --thp 1 --no-data_rand_walk" Test not applicable, system has only 1 nodes. # Running RAM-bw-local-2x, "perf bench numa mem -p 2 -t 1 -P 1024 -C 0,2 -M 0x2 -s 20 -zZq --thp 1 --no-data_rand_walk" 20.138 secs slowest (max) thread-runtime 20.000 secs fastest (min) thread-runtime 20.121 secs average thread-runtime 0.342 % difference between max/avg runtime 135.961 GB data processed, per thread 271.922 GB data processed, total 0.148 nsecs/byte/thread runtime 6.752 GB/sec/thread speed 13.503 GB/sec total speed # Running RAM-bw-remote-2x, "perf bench numa mem -p 2 -t 1 -P 1024 -C 0,2 -M 1x2 -s 20 -zZq --thp 1 --no-data_rand_walk" Test not applicable, system has only 1 nodes. # Running RAM-bw-cross, "perf bench numa mem -p 2 -t 1 -P 1024 -C 0,8 -M 1,0 -s 20 -zZq --thp 1 --no-data_rand_walk" Test not applicable, system has only 1 nodes. # Running 1x3-convergence, "perf bench numa mem -p 1 -t 3 -P 512 -s 100 -zZ0qcm --thp 1" 0.747 secs latency to NUMA-converge 0.747 secs slowest (max) thread-runtime 0.000 secs fastest (min) thread-runtime 0.714 secs average thread-runtime 50.000 % difference between max/avg runtime 3.228 GB data processed, per thread 9.683 GB data processed, total 0.231 nsecs/byte/thread runtime 4.321 GB/sec/thread speed 12.964 GB/sec total speed # Running 1x4-convergence, "perf bench numa mem -p 1 -t 4 -P 512 -s 100 -zZ0qcm --thp 1" 1.127 secs latency to NUMA-converge 1.127 secs slowest (max) thread-runtime 1.000 secs fastest (min) thread-runtime 1.089 secs average thread-runtime 5.624 % difference between max/avg runtime 3.765 GB data processed, per thread 15.062 GB data processed, total 0.299 nsecs/byte/thread runtime 3.342 GB/sec/thread speed 13.368 GB/sec total speed # Running 1x6-convergence, "perf bench numa mem -p 1 -t 6 -P 1020 -s 100 -zZ0qcm --thp 1" 1.003 secs latency to NUMA-converge 1.003 secs slowest (max) thread-runtime 0.000 secs fastest (min) thread-runtime 0.889 secs average thread-runtime 50.000 % difference between max/avg runtime 2.141 GB data processed, per thread 12.847 GB data processed, total 0.469 nsecs/byte/thread runtime 2.134 GB/sec/thread speed 12.805 GB/sec total speed # Running 2x3-convergence, "perf bench numa mem -p 2 -t 3 -P 1020 -s 100 -zZ0qcm --thp 1" 1.814 secs latency to NUMA-converge 1.814 secs slowest (max) thread-runtime 1.000 secs fastest (min) thread-runtime 1.716 secs average thread-runtime 22.440 % difference between max/avg runtime 3.747 GB data processed, per thread 22.483 GB data processed, total 0.484 nsecs/byte/thread runtime 2.065 GB/sec/thread speed 12.393 GB/sec total speed # Running 3x3-convergence, "perf bench numa mem -p 3 -t 3 -P 1020 -s 100 -zZ0qcm --thp 1" 2.065 secs latency to NUMA-converge 2.065 secs slowest (max) thread-runtime 1.000 secs fastest (min) thread-runtime 1.947 secs average thread-runtime 25.788 % difference between max/avg runtime 2.855 GB data processed, per thread 25.694 GB data processed, total 0.723 nsecs/byte/thread runtime 1.382 GB/sec/thread speed 12.442 GB/sec total speed # Running 4x4-convergence, "perf bench numa mem -p 4 -t 4 -P 512 -s 100 -zZ0qcm --thp 1" 1.912 secs latency to NUMA-converge 1.912 secs slowest (max) thread-runtime 1.000 secs fastest (min) thread-runtime 1.775 secs average thread-runtime 23.852 % difference between max/avg runtime 1.479 GB data processed, per thread 23.668 GB data processed, total 1.293 nsecs/byte/thread runtime 0.774 GB/sec/thread speed 12.378 GB/sec total speed # Running 4x4-convergence-NOTHP, "perf bench numa mem -p 4 -t 4 -P 512 -s 100 -zZ0qcm --thp 1 --thp -1" 1.783 secs latency to NUMA-converge 1.783 secs slowest (max) thread-runtime 1.000 secs fastest (min) thread-runtime 1.633 secs average thread-runtime 21.960 % difference between max/avg runtime 1.345 GB data processed, per thread 21.517 GB data processed, total 1.326 nsecs/byte/thread runtime 0.754 GB/sec/thread speed 12.067 GB/sec total speed # Running 4x6-convergence, "perf bench numa mem -p 4 -t 6 -P 1020 -s 100 -zZ0qcm --thp 1" 5.396 secs latency to NUMA-converge 5.396 secs slowest (max) thread-runtime 4.000 secs fastest (min) thread-runtime 4.928 secs average thread-runtime 12.937 % difference between max/avg runtime 2.721 GB data processed, per thread 65.306 GB data processed, total 1.983 nsecs/byte/thread runtime 0.504 GB/sec/thread speed 12.102 GB/sec total speed # Running 4x8-convergence, "perf bench numa mem -p 4 -t 8 -P 512 -s 100 -zZ0qcm --thp 1" 3.121 secs latency to NUMA-converge 3.121 secs slowest (max) thread-runtime 2.000 secs fastest (min) thread-runtime 2.836 secs average thread-runtime 17.962 % difference between max/avg runtime 1.194 GB data processed, per thread 38.192 GB data processed, total 2.615 nsecs/byte/thread runtime 0.382 GB/sec/thread speed 12.236 GB/sec total speed # Running 8x4-convergence, "perf bench numa mem -p 8 -t 4 -P 512 -s 100 -zZ0qcm --thp 1" 4.302 secs latency to NUMA-converge 4.302 secs slowest (max) thread-runtime 3.000 secs fastest (min) thread-runtime 4.045 secs average thread-runtime 15.133 % difference between max/avg runtime 1.631 GB data processed, per thread 52.178 GB data processed, total 2.638 nsecs/byte/thread runtime 0.379 GB/sec/thread speed 12.128 GB/sec total speed # Running 8x4-convergence-NOTHP, "perf bench numa mem -p 8 -t 4 -P 512 -s 100 -zZ0qcm --thp 1 --thp -1" 4.418 secs latency to NUMA-converge 4.418 secs slowest (max) thread-runtime 3.000 secs fastest (min) thread-runtime 4.104 secs average thread-runtime 16.045 % difference between max/avg runtime 1.664 GB data processed, per thread 53.254 GB data processed, total 2.655 nsecs/byte/thread runtime 0.377 GB/sec/thread speed 12.055 GB/sec total speed # Running 3x1-convergence, "perf bench numa mem -p 3 -t 1 -P 512 -s 100 -zZ0qcm --thp 1" 0.973 secs latency to NUMA-converge 0.973 secs slowest (max) thread-runtime 0.000 secs fastest (min) thread-runtime 0.955 secs average thread-runtime 50.000 % difference between max/avg runtime 4.124 GB data processed, per thread 12.372 GB data processed, total 0.236 nsecs/byte/thread runtime 4.238 GB/sec/thread speed 12.715 GB/sec total speed # Running 4x1-convergence, "perf bench numa mem -p 4 -t 1 -P 512 -s 100 -zZ0qcm --thp 1" 0.820 secs latency to NUMA-converge 0.820 secs slowest (max) thread-runtime 0.000 secs fastest (min) thread-runtime 0.808 secs average thread-runtime 50.000 % difference between max/avg runtime 2.555 GB data processed, per thread 10.220 GB data processed, total 0.321 nsecs/byte/thread runtime 3.117 GB/sec/thread speed 12.468 GB/sec total speed # Running 8x1-convergence, "perf bench numa mem -p 8 -t 1 -P 512 -s 100 -zZ0qcm --thp 1" 0.667 secs latency to NUMA-converge 0.667 secs slowest (max) thread-runtime 0.000 secs fastest (min) thread-runtime 0.607 secs average thread-runtime 50.000 % difference between max/avg runtime 1.009 GB data processed, per thread 8.069 GB data processed, total 0.661 nsecs/byte/thread runtime 1.512 GB/sec/thread speed 12.095 GB/sec total speed # Running 16x1-convergence, "perf bench numa mem -p 16 -t 1 -P 256 -s 100 -zZ0qcm --thp 1" 1.546 secs latency to NUMA-converge 1.546 secs slowest (max) thread-runtime 1.000 secs fastest (min) thread-runtime 1.485 secs average thread-runtime 17.664 % difference between max/avg runtime 1.162 GB data processed, per thread 18.594 GB data processed, total 1.331 nsecs/byte/thread runtime 0.752 GB/sec/thread speed 12.025 GB/sec total speed # Running 32x1-convergence, "perf bench numa mem -p 32 -t 1 -P 128 -s 100 -zZ0qcm --thp 1" 0.812 secs latency to NUMA-converge 0.812 secs slowest (max) thread-runtime 0.000 secs fastest (min) thread-runtime 0.739 secs average thread-runtime 50.000 % difference between max/avg runtime 0.309 GB data processed, per thread 9.874 GB data processed, total 2.630 nsecs/byte/thread runtime 0.380 GB/sec/thread speed 12.166 GB/sec total speed # Running 2x1-bw-process, "perf bench numa mem -p 2 -t 1 -P 1024 -s 20 -zZ0q --thp 1" 20.044 secs slowest (max) thread-runtime 20.000 secs fastest (min) thread-runtime 20.020 secs average thread-runtime 0.109 % difference between max/avg runtime 125.750 GB data processed, per thread 251.501 GB data processed, total 0.159 nsecs/byte/thread runtime 6.274 GB/sec/thread speed 12.548 GB/sec total speed # Running 3x1-bw-process, "perf bench numa mem -p 3 -t 1 -P 1024 -s 20 -zZ0q --thp 1" 20.148 secs slowest (max) thread-runtime 20.000 secs fastest (min) thread-runtime 20.090 secs average thread-runtime 0.367 % difference between max/avg runtime 85.267 GB data processed, per thread 255.800 GB data processed, total 0.236 nsecs/byte/thread runtime 4.232 GB/sec/thread speed 12.696 GB/sec total speed # Running 4x1-bw-process, "perf bench numa mem -p 4 -t 1 -P 1024 -s 20 -zZ0q --thp 1" 20.169 secs slowest (max) thread-runtime 20.000 secs fastest (min) thread-runtime 20.100 secs average thread-runtime 0.419 % difference between max/avg runtime 63.144 GB data processed, per thread 252.576 GB data processed, total 0.319 nsecs/byte/thread runtime 3.131 GB/sec/thread speed 12.523 GB/sec total speed # Running 8x1-bw-process, "perf bench numa mem -p 8 -t 1 -P 512 -s 20 -zZ0q --thp 1" 20.175 secs slowest (max) thread-runtime 20.000 secs fastest (min) thread-runtime 20.107 secs average thread-runtime 0.433 % difference between max/avg runtime 31.267 GB data processed, per thread 250.133 GB data processed, total 0.645 nsecs/byte/thread runtime 1.550 GB/sec/thread speed 12.398 GB/sec total speed # Running 8x1-bw-process-NOTHP, "perf bench numa mem -p 8 -t 1 -P 512 -s 20 -zZ0q --thp 1 --thp -1" 20.216 secs slowest (max) thread-runtime 20.000 secs fastest (min) thread-runtime 20.113 secs average thread-runtime 0.535 % difference between max/avg runtime 30.998 GB data processed, per thread 247.981 GB data processed, total 0.652 nsecs/byte/thread runtime 1.533 GB/sec/thread speed 12.266 GB/sec total speed # Running 16x1-bw-process, "perf bench numa mem -p 16 -t 1 -P 256 -s 20 -zZ0q --thp 1" 20.234 secs slowest (max) thread-runtime 20.000 secs fastest (min) thread-runtime 20.174 secs average thread-runtime 0.577 % difference between max/avg runtime 15.377 GB data processed, per thread 246.039 GB data processed, total 1.316 nsecs/byte/thread runtime 0.760 GB/sec/thread speed 12.160 GB/sec total speed # Running 1x4-bw-thread, "perf bench numa mem -p 1 -t 4 -T 256 -s 20 -zZ0q --thp 1" 20.040 secs slowest (max) thread-runtime 20.000 secs fastest (min) thread-runtime 20.028 secs average thread-runtime 0.099 % difference between max/avg runtime 66.832 GB data processed, per thread 267.328 GB data processed, total 0.300 nsecs/byte/thread runtime 3.335 GB/sec/thread speed 13.340 GB/sec total speed # Running 1x8-bw-thread, "perf bench numa mem -p 1 -t 8 -T 256 -s 20 -zZ0q --thp 1" 20.064 secs slowest (max) thread-runtime 20.000 secs fastest (min) thread-runtime 20.034 secs average thread-runtime 0.160 % difference between max/avg runtime 32.911 GB data processed, per thread 263.286 GB data processed, total 0.610 nsecs/byte/thread runtime 1.640 GB/sec/thread speed 13.122 GB/sec total speed # Running 1x16-bw-thread, "perf bench numa mem -p 1 -t 16 -T 128 -s 20 -zZ0q --thp 1" 20.092 secs slowest (max) thread-runtime 20.000 secs fastest (min) thread-runtime 20.052 secs average thread-runtime 0.230 % difference between max/avg runtime 16.131 GB data processed, per thread 258.088 GB data processed, total 1.246 nsecs/byte/thread runtime 0.803 GB/sec/thread speed 12.845 GB/sec total speed # Running 1x32-bw-thread, "perf bench numa mem -p 1 -t 32 -T 64 -s 20 -zZ0q --thp 1" 20.099 secs slowest (max) thread-runtime 20.000 secs fastest (min) thread-runtime 20.063 secs average thread-runtime 0.247 % difference between max/avg runtime 7.962 GB data processed, per thread 254.773 GB data processed, total 2.525 nsecs/byte/thread runtime 0.396 GB/sec/thread speed 12.676 GB/sec total speed # Running 2x3-bw-process, "perf bench numa mem -p 2 -t 3 -P 512 -s 20 -zZ0q --thp 1" 20.150 secs slowest (max) thread-runtime 20.000 secs fastest (min) thread-runtime 20.120 secs average thread-runtime 0.372 % difference between max/avg runtime 44.827 GB data processed, per thread 268.960 GB data processed, total 0.450 nsecs/byte/thread runtime 2.225 GB/sec/thread speed 13.348 GB/sec total speed # Running 4x4-bw-process, "perf bench numa mem -p 4 -t 4 -P 512 -s 20 -zZ0q --thp 1" 20.258 secs slowest (max) thread-runtime 20.000 secs fastest (min) thread-runtime 20.168 secs average thread-runtime 0.636 % difference between max/avg runtime 17.079 GB data processed, per thread 273.263 GB data processed, total 1.186 nsecs/byte/thread runtime 0.843 GB/sec/thread speed 13.489 GB/sec total speed # Running 4x6-bw-process, "perf bench numa mem -p 4 -t 6 -P 512 -s 20 -zZ0q --thp 1" 20.559 secs slowest (max) thread-runtime 20.000 secs fastest (min) thread-runtime 20.382 secs average thread-runtime 1.359 % difference between max/avg runtime 10.758 GB data processed, per thread 258.201 GB data processed, total 1.911 nsecs/byte/thread runtime 0.523 GB/sec/thread speed 12.559 GB/sec total speed # Running 4x8-bw-process, "perf bench numa mem -p 4 -t 8 -P 512 -s 20 -zZ0q --thp 1" 20.744 secs slowest (max) thread-runtime 20.000 secs fastest (min) thread-runtime 20.516 secs average thread-runtime 1.792 % difference between max/avg runtime 8.069 GB data processed, per thread 258.201 GB data processed, total 2.571 nsecs/byte/thread runtime 0.389 GB/sec/thread speed 12.447 GB/sec total speed # Running 4x8-bw-process-NOTHP, "perf bench numa mem -p 4 -t 8 -P 512 -s 20 -zZ0q --thp 1 --thp -1" 20.855 secs slowest (max) thread-runtime 20.000 secs fastest (min) thread-runtime 20.561 secs average thread-runtime 2.050 % difference between max/avg runtime 8.069 GB data processed, per thread 258.201 GB data processed, total 2.585 nsecs/byte/thread runtime 0.387 GB/sec/thread speed 12.381 GB/sec total speed # Running 3x3-bw-process, "perf bench numa mem -p 3 -t 3 -P 512 -s 20 -zZ0q --thp 1" 20.134 secs slowest (max) thread-runtime 20.000 secs fastest (min) thread-runtime 20.077 secs average thread-runtime 0.333 % difference between max/avg runtime 28.091 GB data processed, per thread 252.822 GB data processed, total 0.717 nsecs/byte/thread runtime 1.395 GB/sec/thread speed 12.557 GB/sec total speed # Running 5x5-bw-process, "perf bench numa mem -p 5 -t 5 -P 512 -s 20 -zZ0q --thp 1" 20.588 secs slowest (max) thread-runtime 20.000 secs fastest (min) thread-runtime 20.375 secs average thread-runtime 1.427 % difference between max/avg runtime 10.177 GB data processed, per thread 254.436 GB data processed, total 2.023 nsecs/byte/thread runtime 0.494 GB/sec/thread speed 12.359 GB/sec total speed # Running 2x16-bw-process, "perf bench numa mem -p 2 -t 16 -P 512 -s 20 -zZ0q --thp 1" 20.657 secs slowest (max) thread-runtime 20.000 secs fastest (min) thread-runtime 20.429 secs average thread-runtime 1.589 % difference between max/avg runtime 8.170 GB data processed, per thread 261.429 GB data processed, total 2.528 nsecs/byte/thread runtime 0.395 GB/sec/thread speed 12.656 GB/sec total speed # Running 1x32-bw-process, "perf bench numa mem -p 1 -t 32 -P 2048 -s 20 -zZ0q --thp 1" 22.981 secs slowest (max) thread-runtime 20.000 secs fastest (min) thread-runtime 21.996 secs average thread-runtime 6.486 % difference between max/avg runtime 8.863 GB data processed, per thread 283.606 GB data processed, total 2.593 nsecs/byte/thread runtime 0.386 GB/sec/thread speed 12.341 GB/sec total speed # Running numa02-bw, "perf bench numa mem -p 1 -t 32 -T 32 -s 20 -zZ0q --thp 1" 20.047 secs slowest (max) thread-runtime 19.000 secs fastest (min) thread-runtime 20.026 secs average thread-runtime 2.611 % difference between max/avg runtime 8.441 GB data processed, per thread 270.111 GB data processed, total 2.375 nsecs/byte/thread runtime 0.421 GB/sec/thread speed 13.474 GB/sec total speed # Running numa02-bw-NOTHP, "perf bench numa mem -p 1 -t 32 -T 32 -s 20 -zZ0q --thp 1 --thp -1" 20.088 secs slowest (max) thread-runtime 19.000 secs fastest (min) thread-runtime 20.025 secs average thread-runtime 2.709 % difference between max/avg runtime 8.411 GB data processed, per thread 269.142 GB data processed, total 2.388 nsecs/byte/thread runtime 0.419 GB/sec/thread speed 13.398 GB/sec total speed # Running numa01-bw-thread, "perf bench numa mem -p 2 -t 16 -T 192 -s 20 -zZ0q --thp 1" 20.293 secs slowest (max) thread-runtime 20.000 secs fastest (min) thread-runtime 20.175 secs average thread-runtime 0.721 % difference between max/avg runtime 7.918 GB data processed, per thread 253.374 GB data processed, total 2.563 nsecs/byte/thread runtime 0.390 GB/sec/thread speed 12.486 GB/sec total speed # Running numa01-bw-thread-NOTHP, "perf bench numa mem -p 2 -t 16 -T 192 -s 20 -zZ0q --thp 1 --thp -1" 20.411 secs slowest (max) thread-runtime 20.000 secs fastest (min) thread-runtime 20.226 secs average thread-runtime 1.006 % difference between max/avg runtime 7.931 GB data processed, per thread 253.778 GB data processed, total 2.574 nsecs/byte/thread runtime 0.389 GB/sec/thread speed 12.434 GB/sec total speed # Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Link: https://lore.kernel.org/r/20201012161611.366482-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-10-14Merge tag 'x86_seves_for_v5.10' of ↵Linus Torvalds1-1/+49
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 SEV-ES support from Borislav Petkov: "SEV-ES enhances the current guest memory encryption support called SEV by also encrypting the guest register state, making the registers inaccessible to the hypervisor by en-/decrypting them on world switches. Thus, it adds additional protection to Linux guests against exfiltration, control flow and rollback attacks. With SEV-ES, the guest is in full control of what registers the hypervisor can access. This is provided by a guest-host exchange mechanism based on a new exception vector called VMM Communication Exception (#VC), a new instruction called VMGEXIT and a shared Guest-Host Communication Block which is a decrypted page shared between the guest and the hypervisor. Intercepts to the hypervisor become #VC exceptions in an SEV-ES guest so in order for that exception mechanism to work, the early x86 init code needed to be made able to handle exceptions, which, in itself, brings a bunch of very nice cleanups and improvements to the early boot code like an early page fault handler, allowing for on-demand building of the identity mapping. With that, !KASLR configurations do not use the EFI page table anymore but switch to a kernel-controlled one. The main part of this series adds the support for that new exchange mechanism. The goal has been to keep this as much as possibly separate from the core x86 code by concentrating the machinery in two SEV-ES-specific files: arch/x86/kernel/sev-es-shared.c arch/x86/kernel/sev-es.c Other interaction with core x86 code has been kept at minimum and behind static keys to minimize the performance impact on !SEV-ES setups. Work by Joerg Roedel and Thomas Lendacky and others" * tag 'x86_seves_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (73 commits) x86/sev-es: Use GHCB accessor for setting the MMIO scratch buffer x86/sev-es: Check required CPU features for SEV-ES x86/efi: Add GHCB mappings when SEV-ES is active x86/sev-es: Handle NMI State x86/sev-es: Support CPU offline/online x86/head/64: Don't call verify_cpu() on starting APs x86/smpboot: Load TSS and getcpu GDT entry before loading IDT x86/realmode: Setup AP jump table x86/realmode: Add SEV-ES specific trampoline entry point x86/vmware: Add VMware-specific handling for VMMCALL under SEV-ES x86/kvm: Add KVM-specific VMMCALL handling under SEV-ES x86/paravirt: Allow hypervisor-specific VMMCALL handling under SEV-ES x86/sev-es: Handle #DB Events x86/sev-es: Handle #AC Events x86/sev-es: Handle VMMCALL Events x86/sev-es: Handle MWAIT/MWAITX Events x86/sev-es: Handle MONITOR/MONITORX Events x86/sev-es: Handle INVD Events x86/sev-es: Handle RDPMC Events x86/sev-es: Handle RDTSC(P) Events ...
2020-10-14Merge tag 'objtool-core-2020-10-13' of ↵Linus Torvalds21-280/+528
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool updates from Ingo Molnar: "Most of the changes are cleanups and reorganization to make the objtool code more arch-agnostic. This is in preparation for non-x86 support. Other changes: - KASAN fixes - Handle unreachable trap after call to noreturn functions better - Ignore unreachable fake jumps - Misc smaller fixes & cleanups" * tag 'objtool-core-2020-10-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits) perf build: Allow nested externs to enable BUILD_BUG() usage objtool: Allow nested externs to enable BUILD_BUG() objtool: Permit __kasan_check_{read,write} under UACCESS objtool: Ignore unreachable trap after call to noreturn functions objtool: Handle calling non-function symbols in other sections objtool: Ignore unreachable fake jumps objtool: Remove useless tests before save_reg() objtool: Decode unwind hint register depending on architecture objtool: Make unwind hint definitions available to other architectures objtool: Only include valid definitions depending on source file type objtool: Rename frame.h -> objtool.h objtool: Refactor jump table code to support other architectures objtool: Make relocation in alternative handling arch dependent objtool: Abstract alternative special case handling objtool: Move macros describing structures to arch-dependent code objtool: Make sync-check consider the target architecture objtool: Group headers to check in a single list objtool: Define 'struct orc_entry' only when needed objtool: Skip ORC entry creation for non-text sections objtool: Move ORC logic out of check() ...
2020-10-14Merge branch 'akpm' (patches from Andrew)Linus Torvalds6-22/+48
Merge misc updates from Andrew Morton: "181 patches. Subsystems affected by this patch series: kbuild, scripts, ntfs, ocfs2, vfs, mm (slab, slub, kmemleak, dax, debug, pagecache, fadvise, gup, swap, memremap, memcg, selftests, pagemap, mincore, hmm, dma, memory-failure, vmallo and migration)" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (181 commits) mm/migrate: remove obsolete comment about device public mm/migrate: remove cpages-- in migrate_vma_finalize() mm, oom_adj: don't loop through tasks in __set_oom_adj when not necessary memblock: use separate iterators for memory and reserved regions memblock: implement for_each_reserved_mem_region() using __next_mem_region() memblock: remove unused memblock_mem_size() x86/setup: simplify reserve_crashkernel() x86/setup: simplify initrd relocation and reservation arch, drivers: replace for_each_membock() with for_each_mem_range() arch, mm: replace for_each_memblock() with for_each_mem_pfn_range() memblock: reduce number of parameters in for_each_mem_range() memblock: make memblock_debug and related functionality private memblock: make for_each_memblock_type() iterator private mircoblaze: drop unneeded NUMA and sparsemem initializations riscv: drop unneeded node initialization h8300, nds32, openrisc: simplify detection of memory extents arm64: numa: simplify dummy_numa_init() arm, xtensa: simplify initialization of high memory pages dma-contiguous: simplify cma_early_percent_memory() KVM: PPC: Book3S HV: simplify kvm_cma_reserve() ...
2020-10-14perf jevents: Fix event code for events referencing std arch eventsJohn Garry1-8/+3
The event code for events referencing std arch events is incorrectly evaluated in json_events(). The issue is that je.event is evaluated properly from try_fixup(), but later NULLified from the real_event() call, as "event" may be NULL. Fix by setting "event" same je.event in try_fixup(). Also remove support for overwriting event code for events using std arch events, as it is not used. Signed-off-by: John Garry <john.garry@huawei.com> Reviewed-By: Kajol Jain<kjain@linux.ibm.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Link: https://lore.kernel.org/r/1602170368-11892-1-git-send-email-john.garry@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-10-14perf diff: Support hot streams comparisonJin Yao2-13/+110
This patch enables perf-diff with "--stream" option. "--stream": Enable hot streams comparison Now let's see example. perf record -b ... Generate perf.data.old with branch data perf record -b ... Generate perf.data with branch data perf diff --stream [ Matched hot streams ] hot chain pair 1: cycles: 1, hits: 27.77% cycles: 1, hits: 9.24% --------------------------- -------------------------- main div.c:39 main div.c:39 main div.c:44 main div.c:44 hot chain pair 2: cycles: 34, hits: 20.06% cycles: 27, hits: 16.98% --------------------------- -------------------------- __random_r random_r.c:360 __random_r random_r.c:360 __random_r random_r.c:388 __random_r random_r.c:388 __random_r random_r.c:388 __random_r random_r.c:388 __random_r random_r.c:380 __random_r random_r.c:380 __random_r random_r.c:357 __random_r random_r.c:357 __random random.c:293 __random random.c:293 __random random.c:293 __random random.c:293 __random random.c:291 __random random.c:291 __random random.c:291 __random random.c:291 __random random.c:291 __random random.c:291 __random random.c:288 __random random.c:288 rand rand.c:27 rand rand.c:27 rand rand.c:26 rand rand.c:26 rand@plt rand@plt rand@plt rand@plt compute_flag div.c:25 compute_flag div.c:25 compute_flag div.c:22 compute_flag div.c:22 main div.c:40 main div.c:40 main div.c:40 main div.c:40 main div.c:39 main div.c:39 hot chain pair 3: cycles: 9, hits: 4.48% cycles: 6, hits: 4.51% --------------------------- -------------------------- __random_r random_r.c:360 __random_r random_r.c:360 __random_r random_r.c:388 __random_r random_r.c:388 __random_r random_r.c:388 __random_r random_r.c:388 __random_r random_r.c:380 __random_r random_r.c:380 [ Hot streams in old perf data only ] hot chain 1: cycles: 18, hits: 6.75% -------------------------- __random_r random_r.c:360 __random_r random_r.c:388 __random_r random_r.c:388 __random_r random_r.c:380 __random_r random_r.c:357 __random random.c:293 __random random.c:293 __random random.c:291 __random random.c:291 __random random.c:291 __random random.c:288 rand rand.c:27 rand rand.c:26 rand@plt rand@plt compute_flag div.c:25 compute_flag div.c:22 main div.c:40 hot chain 2: cycles: 29, hits: 2.78% -------------------------- compute_flag div.c:22 main div.c:40 main div.c:40 main div.c:39 [ Hot streams in new perf data only ] hot chain 1: cycles: 4, hits: 4.54% -------------------------- main div.c:42 compute_flag div.c:28 hot chain 2: cycles: 5, hits: 3.51% -------------------------- main div.c:39 main div.c:44 main div.c:42 compute_flag div.c:28 Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/r/20201009022845.13141-8-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-10-14perf streams: Report hot streamsJin Yao4-0/+141
We show the streams separately. They are divided into different sections. 1. "Matched hot streams" 2. "Hot streams in old perf data only" 3. "Hot streams in new perf data only". For each stream, we report the cycles and hot percent (hits%). For example, cycles: 2, hits: 4.08% -------------------------- main div.c:42 compute_flag div.c:28 Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/r/20201009022845.13141-7-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-10-14perf streams: Calculate the sum of total streams hitsJin Yao4-0/+38
We have used callchain_node->hit to measure the hot level of one stream. This patch calculates the sum of hits of total streams. Thus in next patch, we can use following formula to report hot percent for one stream. hot percent = callchain_node->hit / sum of total hits Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/r/20201009022845.13141-6-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-10-14perf streams: Link stream pairJin Yao2-0/+44
In previous patch, we have created an evsel_streams for one event, and top N hottest streams will be saved in a stream array in evsel_streams. This patch compares total streams among two evsel_streams. Once two streams are fully matched, they will be linked as a pair. From the pair, we can know which streams are matched. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/r/20201009022845.13141-5-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-10-14perf streams: Compare two streamsJin Yao2-0/+58
Stream is the branch history which is aggregated by the branch records from perf samples. Now we support the callchain as stream. If the callchain entries of one stream are fully matched with the callchain entries of another stream, we think two streams are matched. For example, cycles: 1, hits: 26.80% cycles: 1, hits: 27.30% ----------------------- ----------------------- main div.c:39 main div.c:39 main div.c:44 main div.c:44 Above two streams are matched (we don't consider the case that source code is changed). The matching logic is, compare the chain string first. If it's not matched, fallback to dso address comparison. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/r/20201009022845.13141-4-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-10-14perf streams: Get the evsel_streams by evsel_idxJin Yao2-0/+16
In previous patch, we have created evsel_streams array. This patch returns the specified evsel_streams according to the evsel_idx. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/r/20201009022845.13141-3-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-10-14perf streams: Introduce branch history "streams"Jin Yao3-0/+195
We define a stream as the branch history which is aggregated by the branch records from perf samples. For example, the callchains aggregated from the branch records are considered as streams. By browsing the hot stream, we can understand the hot code path. Now we only support the callchain for stream. For measuring the hot level for a stream, we use the callchain_node->hit, higher is hotter. There may be many callchains sampled so we only focus on the top N hottest callchains. N is a user defined parameter or predefined default value (nr_streams_max). This patch creates an evsel_streams array per event, and saves the top N hottest streams in a stream array. So now we can get the per-event top N hottest streams. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/r/20201009022845.13141-2-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-10-14perf intel-pt: Improve PT documentation slightlyAndi Kleen1-0/+30
Document the higher level --insn-trace etc. perf script options. Include the howto how to build xed into the manpage Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Link: http://lore.kernel.org/lkml/20201014035346.4772-1-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-10-14perf tools: Add support for exclusive groups/eventsAndi Kleen4-4/+68
Peter suggested that using the exclusive mode in perf could avoid some problems with bad scheduling of groups. Exclusive is implemented in the kernel, but wasn't exposed by the perf tool, so hard to use without custom low level API users. Add support for marking groups or events with :e for exclusive in the perf tool. The implementation is basically the same as the existing pinned attribute. Committer testing: # perf test "parse event" 6: Parse event definition strings : Ok # perf test -v "parse event" |& grep :u*e running test 56 'instructions:uep' running test 57 '{cycles,cache-misses,branch-misses}:e' # # # grep "model name" -m1 /proc/cpuinfo model name : AMD Ryzen 9 3900X 12-Core Processor # # perf stat -a -e '{cycles,cache-misses,branch-misses}:e' sleep 1 Performance counter stats for 'system wide': <not counted> cycles (0.00%) <not counted> cache-misses (0.00%) <not counted> branch-misses (0.00%) 1.001269893 seconds time elapsed Some events weren't counted. Try disabling the NMI watchdog: echo 0 > /proc/sys/kernel/nmi_watchdog perf stat ... echo 1 > /proc/sys/kernel/nmi_watchdog # echo 0 > /proc/sys/kernel/nmi_watchdog # perf stat -a -e '{cycles,cache-misses,branch-misses}:e' sleep 1 Performance counter stats for 'system wide': 1,298,663,141 cycles 30,962,215 cache-misses 5,325,150 branch-misses 1.001474934 seconds time elapsed # # The output for asking for precise events on AMD needs to improve, it # supposedly works only for system wide or per CPU # # perf stat -a -e '{cycles,cache-misses,branch-misses}:uep' sleep 1 Error: The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (cycles). /bin/dmesg | grep -i perf may provide additional information. # perf stat -a -e '{cycles,cache-misses,branch-misses}:ue' sleep 1 Performance counter stats for 'system wide': 746,363,126 cycles 16,881,611 cache-misses 2,871,259 branch-misses 1.001636066 seconds time elapsed # Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20201014144255.22699-1-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-10-14perf test: Add build id shell testJiri Olsa1-0/+101
Add a test for the build id cache that adds a binary with sha1 and md5 build ids and verifies it's added properly. The test updates build id cache with 'perf record' and 'perf buildid-cache -a'. Committer testing: # perf test "build id" 82: build id cache operations : Ok # # perf test -v "build id" 82: build id cache operations : --- start --- test child forked, pid 447218 test binaries: /tmp/perf.ex.SHA1.B8I /tmp/perf.ex.MD5.7Nv Adding d1abc1eb7568358cf23c959566f23462461834d1 /tmp/perf.ex.SHA1.B8I: Ok build id: d1abc1eb7568358cf23c959566f23462461834d1 link: /tmp/perf.debug.sS2/.build-id/d1/abc1eb7568358cf23c959566f23462461834d1 file: /tmp/perf.debug.sS2/.build-id/d1/../../tmp/perf.ex.SHA1.B8I/d1abc1eb7568358cf23c959566f23462461834d1/elf OK for /tmp/perf.ex.SHA1.B8I Adding a50e350e97c43b4708d09bcd85ebfff7 /tmp/perf.ex.MD5.7Nv: Ok build id: a50e350e97c43b4708d09bcd85ebfff7 link: /tmp/perf.debug.IuW/.build-id/a5/0e350e97c43b4708d09bcd85ebfff7 file: /tmp/perf.debug.IuW/.build-id/a5/../../tmp/perf.ex.MD5.7Nv/a50e350e97c43b4708d09bcd85ebfff7/elf OK for /tmp/perf.ex.MD5.7Nv [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.034 MB /tmp/perf.data.xrH ] build id: d1abc1eb7568358cf23c959566f23462461834d1 link: /tmp/perf.debug.eGR/.build-id/d1/abc1eb7568358cf23c959566f23462461834d1 file: /tmp/perf.debug.eGR/.build-id/d1/../../tmp/perf.ex.SHA1.B8I/d1abc1eb7568358cf23c959566f23462461834d1/elf OK for /tmp/perf.ex.SHA1.B8I [ perf record: Woken up 2 times to write data ] [ perf record: Captured and wrote 0.034 MB /tmp/perf.data.cbE ] build id: a50e350e97c43b4708d09bcd85ebfff7 link: /tmp/perf.debug.82t/.build-id/a5/0e350e97c43b4708d09bcd85ebfff7 file: /tmp/perf.debug.82t/.build-id/a5/../../tmp/perf.ex.MD5.7Nv/a50e350e97c43b4708d09bcd85ebfff7/elf OK for /tmp/perf.ex.MD5.7Nv test child finished with 0 ---- end ---- build id cache operations: Ok # Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Ian Rogers <irogers@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Link: https://lore.kernel.org/r/20201013192441.1299447-10-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-10-14perf tools: Align buildid list output for short build idsJiri Olsa3-4/+5
With shorter md5 build ids we need to align their paths properly with other build ids: $ perf buildid-list 17f4e448cc746582ea1881528deb549f7fdb3fd5 [kernel.kallsyms] a50e350e97c43b4708d09bcd85ebfff7 .../tools/perf/buildid-ex-md5 1805c738c8f3ec0f47b7ea09080c28f34d18a82b /usr/lib64/ld-2.31.so $ Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20201013192441.1299447-9-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-10-14perf tools: Add size to 'struct perf_record_header_build_id'Jiri Olsa3-7/+23
We do not store size with build ids in perf data, but there's enough space to do it. Adding misc bit PERF_RECORD_MISC_BUILD_ID_SIZE to mark build id event with size. With this fix the dso with md5 build id will have correct build id data and will be usable for debuginfod processing if needed (coming in following patches). Committer notes: Use %zu with size_t to fix this error on 32-bit arches: util/header.c: In function '__event_process_build_id': util/header.c:2105:3: error: format '%lu' expects argument of type 'long unsigned int', but argument 6 has type 'size_t' [-Werror=format=] pr_debug("build id event received for %s: %s [%lu]\n", ^ Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20201013192441.1299447-8-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-10-14perf tools: Pass build_id object to dso__build_id_equal()Jiri Olsa4-6/+11
Passing build_id object to dso__build_id_equal(), so we can properly check build id with different size than sha1. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20201013192441.1299447-7-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-10-14perf tools: Pass build_id object to dso__set_build_id()Jiri Olsa5-6/+8
Passing build_id object to dso__set_build_id(), so it's easier to initialize dos's build id object. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20201013192441.1299447-6-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-10-14perf tools: Pass build_id object to build_id__sprintf()Jiri Olsa12-35/+43
Passing build_id object to build_id__sprintf function, so it can operate with the proper size of build id. This will create proper md5 build id readable names, like following: a50e350e97c43b4708d09bcd85ebfff7 instead of: a50e350e97c43b4708d09bcd85ebfff700000000 Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20201013192441.1299447-5-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-10-14perf tools: Pass build id object to sysfs__read_build_id()Jiri Olsa6-23/+16
Passing build id object to sysfs__read_build_id function, so it can populate the size of the build_id object. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20201013192441.1299447-4-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-10-14perf tools: Pass build_id object to filename__read_build_id()Jiri Olsa11-57/+60
Pass a build_id object to filename__read_build_id function, so it can populate the size of the build_id object. Changing filename__read_build_id() code for both ELF/non-ELF code. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20201013192441.1299447-3-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-10-14perf tools: Use build_id object in dsoJiri Olsa15-29/+34
Replace build_id byte array with struct build_id object and all the code that references it. The objective is to carry size together with build id array, so it's better to keep both together. This is preparatory change for following patches, and there's no functional change. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20201013192441.1299447-2-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-10-14selftests/powerpc: Fix eeh-basic.sh exit codesOliver O'Halloran1-3/+6
The kselftests test running infrastructure expects tests to finish with an exit code of 4 if the test decided it should be skipped. Currently eeh-basic.sh exits with the number of devices that failed to recover, so if four devices didn't recover we'll report a skip instead of a fail. Fix this by checking if the return code is non-zero and report success and failure by returning 0 or 1 respectively. For the cases where should actually skip return 4. Fixes: 85d86c8aa52e ("selftests/powerpc: Add basic EEH selftest") Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201014024711.1138386-1-oohall@gmail.com
2020-10-14selftests/vm: 8x compaction_test speedupJohn Hubbard1-5/+6
This patch reduces the running time for compaction_test from about 27 sec, to 3.3 sec, which is about an 8x speedup. These numbers are for an Intel x86_64 system with 32 GB of DRAM. The compaction_test.c program was spending most of its time doing mmap(), 1 MB at a time, on about 25 GB of memory. Instead, do the mmaps 100 MB at a time. (Going past 100 MB doesn't make things go much faster, because other parts of the program are using the remaining time.) Signed-off-by: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Sri Jayaramappa <sjayaram@akamai.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Mel Gorman <mgorman@techsingularity.net> Link: https://lkml.kernel.org/r/20201002080621.551044-2-jhubbard@nvidia.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-14tools/testing/selftests/vm/hmm-tests.c: use the new SKIP() macroRalph Campbell1-2/+2
Some tests might not be able to be run if resources like huge pages are not available. Mark these tests as skipped instead of simply passing. Signed-off-by: Ralph Campbell <rcampbell@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Shuah Khan <shuah@kernel.org> Link: http://lkml.kernel.org/r/20200827190400.12608-1-rcampbell@nvidia.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-14selftests/vm: fix incorrect gcc invocation in some casesJohn Hubbard1-0/+12
Avoid accidental wrong builds, due to built-in rules working just a little bit too well--but not quite as well as required for our situation here. In other words, "make userfaultfd" (for example) is supposed to fail to build at all, because this Makefile only supports either "make" (all), or "make /full/path". However, the built-in rules, if not suppressed, will pick up CFLAGS and the initial LDLIBS (but not the target-specific LDLIBS, because those are only set for the full path target!). This causes it to get pretty far into building things despite using incorrect values such as an *occasionally* incomplete LDLIBS value. Signed-off-by: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Shuah Khan <shuah@kernel.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Link: https://lkml.kernel.org/r/20200915012901.1655280-3-jhubbard@nvidia.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-11 12:37:09 +0300