summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)AuthorFilesLines
2014-03-18Merge tag 'perf-urgent-for-mingo' of ↵Ingo Molnar2-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull two 'perf bench' fixes from Arnaldo: * Make 'perf bench mem' (i.e. no args) mean 'run all tests' so that we can run all tests, not stopping at the numa ones. (Arnaldo Carvalho de Melo) * Fix NULL pointer dereference after last test in in "perf bench all" (Patrick Palka) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-03-16Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds3-5/+13
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Misc smaller fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86: Fix leak in uncore_type_init failure paths perf machine: Use map as success in ip__resolve_ams perf symbols: Fix crash in elf_section_by_name perf trace: Decode architecture-specific signal numbers
2014-03-14perf bench: Fix NULL pointer dereference in "perf bench all"Patrick Palka1-1/+1
The for_each_bench() macro must check that the "benchmarks" field of a collection is not NULL before dereferencing it because the "all" collection in particular has a NULL "benchmarks" field (signifying that it has no benchmarks to iterate over). This fixes this NULL pointer dereference when running "perf bench all": [root@ssdandy ~]# perf bench all <SNIP> # Running mem/memset benchmark... # Copying 1MB Bytes ... 2.453675 GB/Sec 12.056327 GB/Sec (with prefault) Segmentation fault (core dumped) [root@ssdandy ~]# Signed-off-by: Patrick Palka <patrick@parcs.ath.cx> Cc: Ingo Molnar <mingo@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1394664051-6037-1-git-send-email-patrick@parcs.ath.cx Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-03-14perf bench numa: Make no args mean 'run all tests'Arnaldo Carvalho de Melo1-0/+1
If we call just: perf bench numa mem it will present the same output as: perf bench numa mem -h i.e. ask for instructions about what to run. While that is kinda ok, using 'run all tests' as the default, i.e. making 'no parms' be equivalent to: perf bench numa mem -a Will allow: perf bench numa all to actually do what is asked: i.e. run all the 'bench' tests, instead of responding to that by asking what to do. That, in turn, allows: perf bench all to actually complete, for the same reasons. And after that, the tests that come after that, and that at some point hit a NULL deref, will run, allowing me to reproduce a recently reported problem. That when you have the needed numa libraries, which wasn't the case for the reporter, making me a bit confused after trying to reproduce his report. So make no parms mean -a. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Patrick Palka <patrick@parcs.ath.cx> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-x7h0ghx4pef4n0brywg21krk@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-03-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds1-1/+1
Pull networking fixes from David Miller: "I know this is a bit more than you want to see, and I've told the wireless folks under no uncertain terms that they must severely scale back the extent of the fixes they are submitting this late in the game. Anyways: 1) vmxnet3's netpoll doesn't perform the equivalent of an ISR, which is the correct implementation, like it should. Instead it does something like a NAPI poll operation. This leads to crashes. From Neil Horman and Arnd Bergmann. 2) Segmentation of SKBs requires proper socket orphaning of the fragments, otherwise we might access stale state released by the release callbacks. This is a 5 patch fix, but the initial patches are giving variables and such significantly clearer names such that the actual fix itself at the end looks trivial. From Michael S. Tsirkin. 3) TCP control block release can deadlock if invoked from a timer on an already "owned" socket. Fix from Eric Dumazet. 4) In the bridge multicast code, we must validate that the destination address of general queries is the link local all-nodes multicast address. From Linus Lüssing. 5) The x86 BPF JIT support for negative offsets puts the parameter for the helper function call in the wrong register. Fix from Alexei Starovoitov. 6) The descriptor type used for RTL_GIGA_MAC_VER_17 chips in the r8169 driver is incorrect. Fix from Hayes Wang. 7) The xen-netback driver tests skb_shinfo(skb)->gso_type bits to see if a packet is a GSO frame, but that's not the correct test. It should use skb_is_gso(skb) instead. Fix from Wei Liu. 8) Negative msg->msg_namelen values should generate an error, from Matthew Leach. 9) at86rf230 can deadlock because it takes the same lock from it's ISR and it's hard_start_xmit method, without disabling interrupts in the latter. Fix from Alexander Aring. 10) The FEC driver's restart doesn't perform operations in the correct order, so promiscuous settings can get lost. Fix from Stefan Wahren. 11) Fix SKB leak in SCTP cookie handling, from Daniel Borkmann. 12) Reference count and memory leak fixes in TIPC from Ying Xue and Erik Hugne. 13) Forced eviction in inet_frag_evictor() must strictly make sure all frags are deleted, otherwise module unload (f.e. 6lowpan) can crash. Fix from Florian Westphal. 14) Remove assumptions in AF_UNIX's use of csum_partial() (which it uses as a hash function), which breaks on PowerPC. From Anton Blanchard. The main gist of the issue is that csum_partial() is defined only as a value that, once folded (f.e. via csum_fold()) produces a correct 16-bit checksum. It is legitimate, therefore, for csum_partial() to produce two different 32-bit values over the same data if their respective alignments are different. 15) Fix endiannes bug in MAC address handling of ibmveth driver, also from Anton Blanchard. 16) Error checks for ipv6 exthdrs offload registration are reversed, from Anton Nayshtut. 17) Externally triggered ipv6 addrconf routes should count against the garbage collection threshold. Fix from Sabrina Dubroca. 18) The PCI shutdown handler added to the bnx2 driver can wedge the chip if it was not brought up earlier already, which in particular causes the firmware to shut down the PHY. Fix from Michael Chan. 19) Adjust the sanity WARN_ON_ONCE() in qdisc_list_add() because as currently coded it can and does trigger in legitimate situations. From Eric Dumazet. 20) BNA driver fails to build on ARM because of a too large udelay() call, fix from Ben Hutchings. 21) Fair-Queue qdisc holds locks during GFP_KERNEL allocations, fix from Eric Dumazet. 22) The vlan passthrough ops added in the previous release causes a regression in source MAC address setting of outgoing headers in some circumstances. Fix from Peter Boström" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (70 commits) ipv6: Avoid unnecessary temporary addresses being generated eth: fec: Fix lost promiscuous mode after reconnecting cable bonding: set correct vlan id for alb xmit path at86rf230: fix lockdep splats net/mlx4_en: Deregister multicast vxlan steering rules when going down vmxnet3: fix building without CONFIG_PCI_MSI MAINTAINERS: add networking selftests to NETWORKING net: socket: error on a negative msg_namelen MAINTAINERS: Add tools/net to NETWORKING [GENERAL] packet: doc: Spelling s/than/that/ net/mlx4_core: Load the IB driver when the device supports IBoE net/mlx4_en: Handle vxlan steering rules for mac address changes net/mlx4_core: Fix wrong dump of the vxlan offloads device capability xen-netback: use skb_is_gso in xenvif_start_xmit r8169: fix the incorrect tx descriptor version tools/net/Makefile: Define PACKAGE to fix build problems x86: bpf_jit: support negative offsets bridge: multicast: enable snooping on general queries only bridge: multicast: add sanity check for general query destination tcp: tcp_release_cb() should release socket ownership ...
2014-03-12tools/net/Makefile: Define PACKAGE to fix build problemsMarkos Chandras1-1/+1
Fixes the following build problem with binutils-2.24 gcc -Wall -O2 -c -o bpf_jit_disasm.o bpf_jit_disasm.c In file included from bpf_jit_disasm.c:25:0: /usr/include/bfd.h:35:2: error: #error config.h must be included before this header #error config.h must be included before this header This is similar to commit 3ce711a6abc27abce1554e1d671a8762b7187690 "perf tools: bfd.h/libbfd detection fails with recent binutils" See: https://sourceware.org/bugzilla/show_bug.cgi?id=14243 CC: David S. Miller <davem@davemloft.net> CC: Daniel Borkmann <dborkman@redhat.com> CC: netdev@vger.kernel.org Acked-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-11Merge tag 'perf-urgent-for-mingo' of ↵Ingo Molnar3-5/+13
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: * Fix build of 'trace' in some systems due to using some architecture-specific signal numbers (Ben Hutchings) * Stop resolving when finding a map in in ip__resolve_ams, this way at least the DSO will be resolved when a symbol isn't (Don Zickus) * Fix crash in elf_section_by_name when not checking if some section string index is valid (Jiri Olsa) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-03-11tools/testing/selftests/ipc/msgque.c: handle msgget failure return correctlyColin Ian King1-0/+1
A failed msgget causes the test to return an uninitialised value in ret. Assign ret to -errno on error exit. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Davidlohr Bueso <davidlohr@hp.com> Cc: Stanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-03-10perf machine: Use map as success in ip__resolve_amsDon Zickus1-1/+1
When trying to map a bunch of instruction addresses to their respective threads, I kept getting a lot of bogus entries [I forget the exact reason as I patched my code months ago]. Looking through ip__resolve_ams, I noticed the check for if (al.sym) and realized, most times I have an al.map definition but sometimes an al.sym is undefined. In the cases where al.sym is undefined, the loop keeps going even though a valid al.map exists. Modify this check to use the more reliable al.map. This fixed my bogus entries. Signed-off-by: Don Zickus <dzickus@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1393386227-149412-2-git-send-email-dzickus@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-03-10perf symbols: Fix crash in elf_section_by_nameJiri Olsa1-3/+3
Fixing crash in elf_section_by_name function caused by missing section name in elf binary. Reported-by: Albert Strasheim <albert@cloudflare.com> Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Albert Strasheim <albert@cloudflare.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1393767127-599-1-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-03-10perf trace: Decode architecture-specific signal numbersBen Hutchings1-1/+9
SIGSTKFLT is not defined on alpha, mips or sparc. SIGEMT and SIGSWI are defined on some architectures and should be decoded here if so. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Fixes: 8bad5b0abfdb ('perf trace: Beautify signal number arg in several syscalls') Cc: Ingo Molnar <mingo@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1391648441.3003.101.camel@deadeye.wl.decadent.org.uk Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-03-03Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds5-4/+15
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull liblockdep fixes from Ingo Molnar: "A handful of build fixes for liblockdep" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tools/liblockdep: Use realpath for srctree and objtree tools/liblockdep: Add a stub for new rcu_is_watching tools/liblockdep: Mark runtests.sh as executable tools/liblockdep: Add include directory to allow tests to compile tools/liblockdep: Fix include of asm/hash.h tools/liblockdep: Fix initialization code path
2014-02-28perf tools: Fix strict alias issue for find_first_bitJiri Olsa1-1/+3
When compiling perf tool code with gcc 4.4.7 I'm getting following error: CC util/session.o cc1: warnings being treated as errors util/session.c: In function ‘perf_session_deliver_event’: tools/perf/util/include/linux/bitops.h:109: error: dereferencing pointer ‘p’ does break strict-aliasing rules tools/perf/util/include/linux/bitops.h:101: error: dereferencing pointer ‘p’ does break strict-aliasing rules util/session.c:697: note: initialized from here tools/perf/util/include/linux/bitops.h:101: note: initialized from here make[1]: *** [util/session.o] Error 1 make: *** [util/session.o] Error 2 The aliased types here are u64 and unsigned long pointers, which is safe for the find_first_bit processing. This error shows up for me only for gcc 4.4 on 32bit x86, even for -Wstrict-aliasing=3, while newer gcc are quiet and scream here for -Wstrict-aliasing={2,1}. Looks like newer gcc changed the rules for strict alias warnings. The gcc documentation offers workaround for valid aliasing by using __may_alias__ attribute: http://gcc.gnu.org/onlinedocs/gcc-4.4.0/gcc/Type-Attributes.html Using this workaround for the find_first_bit function. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1393434867-20271-1-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-02-28perf tools: fix BFD detection on opensuseAndi Kleen2-2/+2
opensuse libbfd requires -lz -liberty to build. Add those to the BFD feature detection. Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: David Ahern <dsahern@gmail.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1389469379-13340-2-git-send-email-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-02-27Merge branch 'liblockdep-fixes' of https://github.com/sashalevin/liblockdep ↵Ingo Molnar5-4/+15
into core/urgent Pull tools/lib/lockdep/ fixes from Sasha Levin. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-02-27Merge tag 'perf-urgent-for-mingo' of ↵Ingo Molnar5-19/+40
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: * Fix annotation on stdio/GTK+ interfaces (Namhyung Kim) * Fix file descriptor leaking while searching DSOs for suitable symtab (Namhyung Kim). Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-02-27tools/liblockdep: Use realpath for srctree and objtreeWang Nan1-2/+2
If BUILD_SRC or CURDIR contains tailing '/', the file names passed to gcc will contain '//'. It will be contained .o's in debuginfo, then confuse debugedit: https://bugzilla.redhat.com/show_bug.cgi?id=304121 This patch uses realpath command to makesure potential tailing '/'s are removed. Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Geng Hui <hui.geng@huawei.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2014-02-27tools/liblockdep: Add a stub for new rcu_is_watchingSasha Levin1-0/+5
Stub out rcu_is_watching(), prevents build error with the updated tree. Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2014-02-27tools/liblockdep: Mark runtests.sh as executableSasha Levin1-0/+0
runtests.sh is used to run the sanity tests for liblockdep and should be set +x. Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2014-02-27tools/liblockdep: Add include directory to allow tests to compileIra W. Snyder1-1/+1
All of the programs in the tests directory require the liblockdep/mutex.h header in order to compile. Add the include directory to the compiler options so that the tests can be built with the provided Makefile. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2014-02-27tools/liblockdep: Fix include of asm/hash.hIra W. Snyder1-0/+6
Commit 71ae8aac ("lib: introduce arch optimized hash library") added an include to <linux/hash.h> for setting up an architecture specific fast hash. This patch mirrors the fix used for perf, titled "tools: perf: util: fix include for non x86 architectures". Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2014-02-27tools/liblockdep: Fix initialization code pathIra W. Snyder1-1/+1
This makes initialization actually happen. Without it, initialization is always skipped due to an incorrect conditional statement. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2014-02-24perf symbols: Destroy unused symsrcsNamhyung Kim1-0/+2
Stephane reported that perf report and annotate failed to process data using lots of (> 500) shared libraries. It was because of the limit on number of open files (ulimit -n). Currently when perf loads a DSO, it'll look for normal and dynamic symbol tables. And if it fails to find out both tables, it'll iterate all of possible symtab types. But many of them are useless since they have no additional information and the problem is that it's not closing those files even though they're not used. Fix it. Reported-by: Stephane Eranian <eranian@google.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Cody P Schafer <cody@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1392859976-32760-2-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-02-24perf annotate: Check availability of annotate when processing samplesNamhyung Kim4-19/+38
The TUI of perf report and top support annotation, but stdio and GTK don't. So it should be checked before calling hist_entry__inc_addr_ samples() to avoid wasting resources that will never be used. perf annotate need it regardless of UI and sort keys, so the check of whether to allocate resources should be on the tools that have annotate as an option in the TUI, 'report' and 'top', not on the function called by all of them. It caused perf annotate on ppc64 to produce zero output, since the buckets were not being allocated. Reported-by: Anton Blanchard <anton@samba.org> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Anton Blanchard <anton@samba.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1392859976-32760-1-git-send-email-namhyung@kernel.org [ Renamed (report,top)__needs_annotate() to ui__has_annotation() ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-02-23Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds4-3/+44
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Misc fixlets from all around the place" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/uncore: Fix IVT/SNB-EP uncore CBOX NID filter table perf/x86: Correctly use FEATURE_PDCM perf, nmi: Fix unknown NMI warning perf trace: Fix ioctl 'request' beautifier build problems on !(i386 || x86_64) arches perf trace: Add fallback definition of EFD_SEMAPHORE perf list: Fix checking for supported events on older kernels perf tools: Handle PERF_RECORD_HEADER_EVENT_TYPE properly perf probe: Do not add offset twice to uprobe address perf/x86: Fix Userspace RDPMC switch perf/x86/intel/p6: Add userspace RDPMC quirk for PPro
2014-02-14perf trace: Fix ioctl 'request' beautifier build problems on !(i386 || ↵Arnaldo Carvalho de Melo1-0/+18
x86_64) arches Supporting decoding the ioctl 'request' parameter needs more work to properly support more architectures, the current approach doesn't work on at least powerpc and sparc, as reported by Ben Hutchings in http://lkml.kernel.org/r/1391593985.3003.48.camel@deadeye.wl.decadent.org.uk . Work around that by making it to be ifdefed for the architectures known to work with the current, limited approach, i386 and x86_64 till better code is written. Reported-by: Ben Hutchings <ben@decadent.org.uk> Acked-by: Ben Hutchings <ben@decadent.org.uk> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: <stable@vger.kernel.org> # 3.13 Fixes: 78645cf3ed32 ("perf trace: Initial beautifier for ioctl's 'cmd' arg") Link: http://lkml.kernel.org/n/tip-ss04k11insqlu329xh5g02q0@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-02-10perf trace: Add fallback definition of EFD_SEMAPHOREBen Hutchings1-0/+4
glibc 2.17 is missing this on sparc, despite the fact that it's not architecture-specific. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Fixes: 49af9e93adfa ('perf trace: Beautify eventfd2 'flags' arg') Cc: <stable@vger.kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1391648435.3003.100.camel@deadeye.wl.decadent.org.uk Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-02-10perf list: Fix checking for supported events on older kernelsVince Weaver1-2/+15
"perf list" listing of hardware events doesn't work on older ARM devices. The change enabling event detection: commit b41f1cec91c37eeea6fdb15effbfa24ea0a5536b Author: Namhyung Kim <namhyung.kim@lge.com> Date: Tue Aug 27 11:41:53 2013 +0900 perf list: Skip unsupported events uses the following code in tools/perf/util/parse-events.c: struct perf_event_attr attr = { .type = type, .config = config, .disabled = 1, .exclude_kernel = 1, }; On ARM machines pre-dating the Cortex-A15 this doesn't work, as these machines don't support .exclude_kernel. So starting with 3.12 "perf list" does not report any hardware events at all on older machines (seen on Rasp-Pi, Pandaboard, Beagleboard, etc). This version of the patch makes changes suggested by Namhyung Kim to check for EACCESS and retry (instead of just dropping the exclude_kernel) so we can properly handle machines where /proc/sys/kernel/perf_event_paranoid is set to 2. Reported-by: Chad Paradis <chad.paradis@umit.maine.edu> Signed-off-by: Vince Weaver <vincent.weaver@maine.edu> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Chad Paradis <chad.paradis@umit.maine.edu> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1312301536150.28814@vincent-weaver-1.um.maine.edu Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-02-10perf tools: Handle PERF_RECORD_HEADER_EVENT_TYPE properlyJiri Olsa1-0/+6
We removed event types from data file in following commits: 6065210 perf tools: Remove event types framework completely 44b3c57 perf tools: Remove event types from perf data file We no longer need this information, because we can get it directly from tracepoints. But we still need to handle PERF_RECORD_HEADER_EVENT_TYPE event for the sake of old perf data files created in pipe mode like: $ perf.3.4 record -o - foo >perf.data $ perf.312 report -i - < perf.data Reported-by: Stephane Eranian <eranian@google.com> Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1391524668-12546-1-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-02-10perf probe: Do not add offset twice to uprobe addressMasami Hiramatsu1-1/+1
Fix perf-probe not to add offset value twice to uprobe probe address when post processing. The tevs[i].point.address struct member is the address of symbol+offset, but current perf-probe adjusts the point.address by adding the offset. As a result, the probe address becomes symbol+offset+offset. This may cause unexpected code corruption. Urgent fix is needed. Without this fix: --- # ./perf probe -x ./perf dso__load_vmlinux+4 # ./perf probe -l probe_perf:dso__load_vmlinux (on 0x000000000006d2b8) # nm ./perf.orig | grep dso__load_vmlinux\$ 000000000046d0a0 T dso__load_vmlinux --- You can see the given offset is 3 but the actual probed address is dso__load_vmlinux+8. With this fix: --- # ./perf probe -x ./perf dso__load_vmlinux+4 # ./perf probe -l probe_perf:dso__load_vmlinux (on 0x000000000006d2b4) --- Now the problem is fixed. Note: This bug is introduced by commit fb7345bbf7fad9bf72ef63a19c707970b9685812 Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: "David A. Long" <dave.long@linaro.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: yrl.pp-manager.tt@hitachi.com Link: http://lkml.kernel.org/r/20140205051858.6519.27314.stgit@kbuild-fedora.yrl.intra.hitachi.co.jp Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-02-09Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds14-63/+162
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Tooling fixes, mostly related to the KASLR fallout, but also other fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf buildid-cache: Check relocation when checking for existing kcore perf tools: Adjust kallsyms for relocated kernel perf tests: No need to set up ref_reloc_sym perf symbols: Prevent the use of kcore if the kernel has moved perf record: Get ref_reloc_sym from kernel map perf machine: Set up ref_reloc_sym in machine__create_kernel_maps() perf machine: Add machine__get_kallsyms_filename() perf tools: Add kallsyms__get_function_start() perf symbols: Fix symbol annotation for relocated kernel perf tools: Fix include for non x86 architectures perf tools: Fix AAAAARGH64 memory barriers perf tools: Demangle kernel and kernel module symbols too perf/doc: Remove mention of non-existent set_perf_event_pending() from design.txt
2014-02-02Merge branch 'release' of ↵Linus Torvalds3-200/+244
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull turbostat updates from Len Brown. * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: tools/power turbostat: introduce -s to dump counters tools/power turbostat: remove unused command line option turbostat: Add option to report joules consumed per sample turbostat: run on HSX turbostat: Add a .gitignore to ignore the compiled turbostat binary turbostat: Clean up error handling; disambiguate error messages; use err and errx turbostat: Factor out common function to open file and exit on failure turbostat: Add a helper to parse a single int out of a file turbostat: Check return value of fscanf turbostat: Use GCC's CPUID functions to support PIC turbostat: Don't attempt to printf an off_t with %zx turbostat: Don't put unprocessed uapi headers in the include path
2014-02-02tools/power turbostat: introduce -s to dump countersAndy Shevchenko1-33/+65
The new option allows just run turbostat and get dump of counter values. It's useful when we have something more than one program to test. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2014-02-02tools/power turbostat: remove unused command line optionAndy Shevchenko1-3/+3
The -s is not used, let's remove it, and update quick help accordingly. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2014-02-01perf buildid-cache: Check relocation when checking for existing kcoreAdrian Hunter1-4/+29
perf buildid-cache does not make another copy of kcore if the buildid and modules match an existing copy. That does not take into account the possibility that the kernel has been relocated. Extend the check to check if the reference relocation symbol matches too, otherwise do make a copy. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Jiri Olsa <jolsa@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1391004884-10334-10-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-02-01perf tools: Adjust kallsyms for relocated kernelAdrian Hunter1-2/+38
If the kernel is relocated at boot time, kallsyms will not match data recorded previously. That does not matter for modules because they are corrected anyway. It also does not matter if vmlinux is being used for symbols. But if perf tools has only kallsyms then the symbols will not match. Fix by applying the delta gained by comparing the old and current addresses of the relocation reference symbol. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Jiri Olsa <jolsa@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1391004884-10334-9-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-02-01perf tests: No need to set up ref_reloc_symAdrian Hunter1-10/+0
Now that ref_reloc_sym is set up by machine__create_kernel_maps(), the "vmlinux symtab matches kallsyms" test does have to do it. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Jiri Olsa <jolsa@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1391004884-10334-8-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-02-01perf symbols: Prevent the use of kcore if the kernel has movedAdrian Hunter1-4/+21
Use of kcore is predicated upon it matching the recorded data. If the kernel has been relocated at boot time (i.e. since the data was recorded) then do not use kcore. Note that it is possible to make a copy of kcore at the time the data is recorded using 'perf buildid-cache'. Then the perf tools will use the copy because it does match the data. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Jiri Olsa <jolsa@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1391004884-10334-7-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-02-01perf record: Get ref_reloc_sym from kernel mapAdrian Hunter3-30/+9
Now that ref_reloc_sym is set up when the kernel map is created, 'perf record' does not need to pass the symbol names to perf_event__synthesize_kernel_mmap() which can read the values needed from ref_reloc_sym directly. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Jiri Olsa <jolsa@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1391004884-10334-6-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-02-01perf machine: Set up ref_reloc_sym in machine__create_kernel_maps()Adrian Hunter2-0/+25
The ref_reloc_sym is always needed for the kernel map in order to check for relocation. Consequently set it up when the kernel map is created. Otherwise it was only being set up by 'perf record'. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Jiri Olsa <jolsa@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1391004884-10334-5-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-02-01perf machine: Add machine__get_kallsyms_filename()Adrian Hunter1-8/+11
Separate out the logic used to make the kallsyms full path name for a machine. It will be reused in a subsequent patch. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Jiri Olsa <jolsa@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1391004884-10334-4-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-02-01perf tools: Add kallsyms__get_function_start()Adrian Hunter2-3/+18
Separate out the logic used to find the start address of the reference symbol used to track kernel relocation. kallsyms__get_function_start() is used in subsequent patches. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Jiri Olsa <jolsa@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1391004884-10334-3-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-02-01perf symbols: Fix symbol annotation for relocated kernelAdrian Hunter3-2/+6
Kernel maps map memory addresses to file offsets. For symbol annotation, objdump needs the object VMA addresses. For an unrelocated kernel, that is the same as the memory address. The addresses passed to objdump for symbol annotation did not take into account kernel relocation. This patch fixes that. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Jiri Olsa <jolsa@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1391004884-10334-2-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-02-01perf tools: Fix include for non x86 architecturesFrancesco Fusco1-0/+6
Commit 71ae8aac ("lib: introduce arch optimized hash library") added an include to <linux/hash.h> for setting up an architecture specific fast hash. Since perf includes directly the non-uapi kernel header, it cannot find <asm/hash.h> on non-x86 and thus prevents perf to be compiled on every architecture other than x86. The problem is the inclusion of <asm/hash.h> in hash.h that results in the following error originating from util/evlist.c: fatal error: asm/hash.h: No such file or directory This commit simply adds an empty <asm/hash.h> stub/file to fix the compile issue on non-x86 architectures. As perf does not use any of these new functions, it fixes the compilation and therefore seems to be the most appropriate solution to go with. Signed-off-by: Francesco Fusco <ffusco@redhat.com> Link: http://lkml.kernel.org/r/2cf8143aad65a6aa6fe30325ef8a65847141afa2.1390829373.git.ffusco@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-01-29perf tools: Fix AAAAARGH64 memory barriersPeter Zijlstra1-2/+2
Someone got the load and store barriers mixed up for AAAAARGH64. Turn them the right side up. Reported-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Fixes: a94d342b9cb0 ("tools/perf: Add required memory barriers") Cc: Ingo Molnar <mingo@kernel.org> Cc: Will Deacon <will.deacon@arm.com> Link: http://lkml.kernel.org/r/20140124154002.GF31570@twins.programming.kicks-ass.net Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-01-27perf tools: Demangle kernel and kernel module symbols tooAvi Kivity1-1/+1
Some kernels contain C++ code, and thus their symbols need to be demangled. This allows 'perf kvm top' to generate readable output. Signed-off-by: Avi Kivity <avi@cloudius-systems.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/26f71bf5bf7ee1408e3f1a803556d5df18223ef1.1390420726.git.avi@cloudius-systems.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-01-26perf/doc: Remove mention of non-existent set_perf_event_pending() from ↵Baruch Siach1-1/+0
design.txt set_perf_event_pending() was removed in e360adbe ("irq_work: Add generic hardirq context callbacks"). Signed-off-by: Baruch Siach <baruch@tkos.co.il> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Link: http://lkml.kernel.org/r/4c54761865d40210be0628cb84701afc5d57b5d8.1390686193.git.baruch@tkos.co.il Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds5-2/+2382
Pull networking updates from David Miller: 1) BPF debugger and asm tool by Daniel Borkmann. 2) Speed up create/bind in AF_PACKET, also from Daniel Borkmann. 3) Correct reciprocal_divide and update users, from Hannes Frederic Sowa and Daniel Borkmann. 4) Currently we only have a "set" operation for the hw timestamp socket ioctl, add a "get" operation to match. From Ben Hutchings. 5) Add better trace events for debugging driver datapath problems, also from Ben Hutchings. 6) Implement auto corking in TCP, from Eric Dumazet. Basically, if we have a small send and a previous packet is already in the qdisc or device queue, defer until TX completion or we get more data. 7) Allow userspace to manage ipv6 temporary addresses, from Jiri Pirko. 8) Add a qdisc bypass option for AF_PACKET sockets, from Daniel Borkmann. 9) Share IP header compression code between Bluetooth and IEEE802154 layers, from Jukka Rissanen. 10) Fix ipv6 router reachability probing, from Jiri Benc. 11) Allow packets to be captured on macvtap devices, from Vlad Yasevich. 12) Support tunneling in GRO layer, from Jerry Chu. 13) Allow bonding to be configured fully using netlink, from Scott Feldman. 14) Allow AF_PACKET users to obtain the VLAN TPID, just like they can already get the TCI. From Atzm Watanabe. 15) New "Heavy Hitter" qdisc, from Terry Lam. 16) Significantly improve the IPSEC support in pktgen, from Fan Du. 17) Allow ipv4 tunnels to cache routes, just like sockets. From Tom Herbert. 18) Add Proportional Integral Enhanced packet scheduler, from Vijay Subramanian. 19) Allow openvswitch to mmap'd netlink, from Thomas Graf. 20) Key TCP metrics blobs also by source address, not just destination address. From Christoph Paasch. 21) Support 10G in generic phylib. From Andy Fleming. 22) Try to short-circuit GRO flow compares using device provided RX hash, if provided. From Tom Herbert. The wireless and netfilter folks have been busy little bees too. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2064 commits) net/cxgb4: Fix referencing freed adapter ipv6: reallocate addrconf router for ipv6 address when lo device up fib_frontend: fix possible NULL pointer dereference rtnetlink: remove IFLA_BOND_SLAVE definition rtnetlink: remove check for fill_slave_info in rtnl_have_link_slave_info qlcnic: update version to 5.3.55 qlcnic: Enhance logic to calculate msix vectors. qlcnic: Refactor interrupt coalescing code for all adapters. qlcnic: Update poll controller code path qlcnic: Interrupt code cleanup qlcnic: Enhance Tx timeout debugging. qlcnic: Use bool for rx_mac_learn. bonding: fix u64 division rtnetlink: add missing IFLA_BOND_AD_INFO_UNSPEC sfc: Use the correct maximum TX DMA ring size for SFC9100 Add Shradha Shah as the sfc driver maintainer. net/vxlan: Share RX skb de-marking and checksum checks with ovs tulip: cleanup by using ARRAY_SIZE() ip_tunnel: clear IPCB in ip_tunnel_xmit() in case dst_link_failure() is called net/cxgb4: Don't retrieve stats during recovery ...
2014-01-25Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds12-18/+51
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "A handful of tooling fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf symbols: Load map before using map->map_ip() perf tools: Fix traceevent plugin path definitions perf symbols: Fix JIT symbol resolution on heap perf stat: Fix memory corruption of xyarray when cpumask is used perf evsel: Remove duplicate member zeroing after free perf tools: Ensure sscanf does not overrun the "mem" field perf stat: fix NULL pointer reference bug with event unit perf tools: Add support for the xtensa architecture perf session: Free cpu_map in perf_session__cpu_bitmap perf timechart: Fix wrong SVG height
2014-01-25Merge tag 'pm+acpi-3.14-rc1' of ↵Linus Torvalds6-20/+152
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management updates from Rafael Wysocki: "As far as the number of commits goes, the top spot belongs to ACPI this time with cpufreq in the second position and a handful of PM core, PNP and cpuidle updates. They are fixes and cleanups mostly, as usual, with a couple of new features in the mix. The most visible change is probably that we will create struct acpi_device objects (visible in sysfs) for all devices represented in the ACPI tables regardless of their status and there will be a new sysfs attribute under those objects allowing user space to check that status via _STA. Consequently, ACPI device eject or generally hot-removal will not delete those objects, unless the table containing the corresponding namespace nodes is unloaded, which is extremely rare. Also ACPI container hotplug will be handled quite a bit differently and cpufreq will support CPU boost ("turbo") generically and not only in the acpi-cpufreq driver. Specifics: - ACPI core changes to make it create a struct acpi_device object for every device represented in the ACPI tables during all namespace scans regardless of the current status of that device. In accordance with this, ACPI hotplug operations will not delete those objects, unless the underlying ACPI tables go away. - On top of the above, new sysfs attribute for ACPI device objects allowing user space to check device status by triggering the execution of _STA for its ACPI object. From Srinivas Pandruvada. - ACPI core hotplug changes reducing code duplication, integrating the PCI root hotplug with the core and reworking container hotplug. - ACPI core simplifications making it use ACPI_COMPANION() in the code "glueing" ACPI device objects to "physical" devices. - ACPICA update to upstream version 20131218. This adds support for the DBG2 and PCCT tables to ACPICA, fixes some bugs and improves debug facilities. From Bob Moore, Lv Zheng and Betty Dall. - Init code change to carry out the early ACPI initialization earlier. That should allow us to use ACPI during the timekeeping initialization and possibly to simplify the EFI initialization too. From Chun-Yi Lee. - Clenups of the inclusions of ACPI headers in many places all over from Lv Zheng and Rashika Kheria (work in progress). - New helper for ACPI _DSM execution and rework of the code in drivers that uses _DSM to execute it via the new helper. From Jiang Liu. - New Win8 OSI blacklist entries from Takashi Iwai. - Assorted ACPI fixes and cleanups from Al Stone, Emil Goode, Hanjun Guo, Lan Tianyu, Masanari Iida, Oliver Neukum, Prarit Bhargava, Rashika Kheria, Tang Chen, Zhang Rui. - intel_pstate driver updates, including proper Baytrail support, from Dirk Brandewie and intel_pstate documentation from Ramkumar Ramachandra. - Generic CPU boost ("turbo") support for cpufreq from Lukasz Majewski. - powernow-k6 cpufreq driver fixes from Mikulas Patocka. - cpufreq core fixes and cleanups from Viresh Kumar, Jane Li, Mark Brown. - Assorted cpufreq drivers fixes and cleanups from Anson Huang, John Tobias, Paul Bolle, Paul Walmsley, Sachin Kamat, Shawn Guo, Viresh Kumar. - cpuidle cleanups from Bartlomiej Zolnierkiewicz. - Support for hibernation APM events from Bin Shi. - Hibernation fix to avoid bringing up nonboot CPUs with ACPI EC disabled during thaw transitions from Bjørn Mork. - PM core fixes and cleanups from Ben Dooks, Leonardo Potenza, Ulf Hansson. - PNP subsystem fixes and cleanups from Dmitry Torokhov, Levente Kurusa, Rashika Kheria. - New tool for profiling system suspend from Todd E Brandt and a cpupower tool cleanup from One Thousand Gnomes" * tag 'pm+acpi-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (153 commits) thermal: exynos: boost: Automatic enable/disable of BOOST feature (at Exynos4412) cpufreq: exynos4x12: Change L0 driver data to CPUFREQ_BOOST_FREQ Documentation: cpufreq / boost: Update BOOST documentation cpufreq: exynos: Extend Exynos cpufreq driver to support boost cpufreq / boost: Kconfig: Support for software-managed BOOST acpi-cpufreq: Adjust the code to use the common boost attribute cpufreq: Add boost frequency support in core intel_pstate: Add trace point to report internal state. cpufreq: introduce cpufreq_generic_get() routine ARM: SA1100: Create dummy clk_get_rate() to avoid build failures cpufreq: stats: create sysfs entries when cpufreq_stats is a module cpufreq: stats: free table and remove sysfs entry in a single routine cpufreq: stats: remove hotplug notifiers cpufreq: stats: handle cpufreq_unregister_driver() and suspend/resume properly cpufreq: speedstep: remove unused speedstep_get_state platform: introduce OF style 'modalias' support for platform bus PM / tools: new tool for suspend/resume performance optimization ACPI: fix module autoloading for ACPI enumerated devices ACPI: add module autoloading support for ACPI enumerated devices ACPI: fix create_modalias() return value handling ...