| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Most of the tests run by fcnal-test.sh relies on the nettest command.
Rather than trying to cover all of the individual tests, check for the
binary only at the beginning.
Also removes the need for log_error which is undefined.
Fixes: 6f9d5cacfe07 ("selftests: Setup for functional tests for fib and socket lookups")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add IPv4 and IPv6 l2tp tests. Current set is over IP and with
IPsec.
v2
- add l2tp.sh to TEST_PROGS in Makefile
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Just minor overlapping changes in the conflicts here.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull networking fixes from David Miller:
"Yeah I should have sent a pull request last week, so there is a lot
more here than usual:
1) Fix memory leak in ebtables compat code, from Wenwen Wang.
2) Several kTLS bug fixes from Jakub Kicinski (circular close on
disconnect etc.)
3) Force slave speed check on link state recovery in bonding 802.3ad
mode, from Thomas Falcon.
4) Clear RX descriptor bits before assigning buffers to them in
stmmac, from Jose Abreu.
5) Several missing of_node_put() calls, mostly wrt. for_each_*() OF
loops, from Nishka Dasgupta.
6) Double kfree_skb() in peak_usb can driver, from Stephane Grosjean.
7) Need to hold sock across skb->destructor invocation, from Cong
Wang.
8) IP header length needs to be validated in ipip tunnel xmit, from
Haishuang Yan.
9) Use after free in ip6 tunnel driver, also from Haishuang Yan.
10) Do not use MSI interrupts on r8169 chips before RTL8168d, from
Heiner Kallweit.
11) Upon bridge device init failure, we need to delete the local fdb.
From Nikolay Aleksandrov.
12) Handle erros from of_get_mac_address() properly in stmmac, from
Martin Blumenstingl.
13) Handle concurrent rename vs. dump in netfilter ipset, from Jozsef
Kadlecsik.
14) Setting NETIF_F_LLTX on mac80211 causes complete breakage with
some devices, so revert. From Johannes Berg.
15) Fix deadlock in rxrpc, from David Howells.
16) Fix Kconfig deps of enetc driver, we must have PHYLIB. From Yue
Haibing.
17) Fix mvpp2 crash on module removal, from Matteo Croce.
18) Fix race in genphy_update_link, from Heiner Kallweit.
19) bpf_xdp_adjust_head() stopped working with generic XDP when we
fixes generic XDP to support stacked devices properly, fix from
Jesper Dangaard Brouer.
20) Unbalanced RCU locking in rt6_update_exception_stamp_rt(), from
David Ahern.
21) Several memory leaks in new sja1105 driver, from Vladimir Oltean"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (214 commits)
net: dsa: sja1105: Fix memory leak on meta state machine error path
net: dsa: sja1105: Fix memory leak on meta state machine normal path
net: dsa: sja1105: Really fix panic on unregistering PTP clock
net: dsa: sja1105: Use the LOCKEDS bit for SJA1105 E/T as well
net: dsa: sja1105: Fix broken learning with vlan_filtering disabled
net: dsa: qca8k: Add of_node_put() in qca8k_setup_mdio_bus()
net: sched: sample: allow accessing psample_group with rtnl
net: sched: police: allow accessing police->params with rtnl
net: hisilicon: Fix dma_map_single failed on arm64
net: hisilicon: fix hip04-xmit never return TX_BUSY
net: hisilicon: make hip04_tx_reclaim non-reentrant
tc-testing: updated vlan action tests with batch create/delete
net sched: update vlan action for batched events operations
net: stmmac: tc: Do not return a fragment entry
net: stmmac: Fix issues when number of Queues >= 4
net: stmmac: xgmac: Fix XGMAC selftests
be2net: disable bh with spin_lock in be_process_mcc
net: cxgb3_main: Fix a resource leak in a error path in 'init_one()'
net: ethernet: sun4i-emac: Support phy-handle property for finding PHYs
net: bridge: move default pvid init/deinit to NETDEV_REGISTER/UNREGISTER
...
|
|
Update TDC tests with cases varifying ability of TC to install or delete
batches of vlan actions.
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make sure that shutdown never works, and at the same time document how
I tested to came to the conclusion that currently reuse is not possible.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"A fix to the Kselftest framework to save and restore errno and a fix
to livepatch to push and pop dynamic debug config"
* tag 'linux-kselftest-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/livepatch: push and pop dynamic debug config
kselftest: save-and-restore errno to allow for %m formatting
|
|
Given the increasing number of BPF selftests, it makes sense to
reduce the time to execute these tests. The ping parameters are
adjusted to reduce the time from measures 9 sec to approx 2.8 sec.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In-order to test both native-XDP (xdpdrv) and generic-XDP (xdpgeneric)
create two wrapper test scripts, that start the test_xdp_vlan.sh script
with these modes.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Change BPF selftest test_xdp_vlan.sh to (default) use generic XDP.
This selftest was created together with a fix for generic XDP, in commit
297249569932 ("net: fix generic XDP to handle if eth header was
mangled"). And was suppose to catch if generic XDP was broken again.
The tests are using veth and assumed that veth driver didn't support
native driver XDP, thus it used the (ip link set) 'xdp' attach that fell
back to generic-XDP. But veth gained native-XDP support in 948d4f214fde
("veth: Add driver XDP"), which caused this test script to use
native-XDP.
Fixes: 948d4f214fde ("veth: Add driver XDP")
Fixes: 97396ff0bc2d ("selftests/bpf: add XDP selftests for modifying and popping VLAN headers")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is a spelling mistake in an error messgae. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf tooling fixes from Thomas Gleixner:
"A set of updates for perf tools and documentation:
perf header:
- Prevent a division by zero
- Deal with an uninitialized warning proper
libbpf:
- Fix the missiong __WORDSIZE definition for musl & al
UAPI headers:
- Synchronize kernel headers
Documentation:
- Fix the memory units for perf.data size"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
libbpf: fix missing __WORDSIZE definition
perf tools: Fix perf.data documentation units for memory size
perf header: Fix use of unitialized value warning
perf header: Fix divide by zero error if f_header.attr_size==0
tools headers UAPI: Sync if_link.h with the kernel
tools headers UAPI: Sync sched.h with the kernel
tools headers UAPI: Sync usbdevice_fs.h with the kernels to get new ioctl
tools perf beauty: Fix usbdevfs_ioctl table generator to handle _IOC()
tools headers UAPI: Update tools's copy of drm.h headers
tools headers UAPI: Update tools's copy of mman.h headers
tools headers UAPI: Update tools's copy of kvm.h headers
tools include UAPI: Sync x86's syscalls_64.tbl and generic unistd.h to pick up clone3 and pidfd_open
|
|
Add use case section to fcnal-test.
Initial test is VRF based with a bridge and vlans. The commands
stem from bug reports fixed by:
a173f066c7cf ("netfilter: bridge: Don't sabotage nf_hook calls from an l3mdev")
cd6428988bf4 ("netfilter: bridge: Don't sabotage nf_hook calls for an l3mdev slave")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add IPv6 netfilter tests to send tcp reset or icmp unreachable for a
port. Initial tests are VRF only.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add netfilter tests to send tcp reset or icmp unreachable for a port.
Initial tests are VRF only.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add IPv6 runtime tests where passive (no traffic flowing) and active
(with traffic) sockets are expected to be reset on device deletes.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add runtime tests where passive (no traffic flowing) and active (with
traffic) sockets are expected to be reset on device deletes.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add IPv6 address bind tests to fcnal-test.sh. Verifies socket binding to
local addresses for raw, tcp and udp including device and VRF cases.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add address bind tests to fcnal-test.sh. Verifies socket binding to
local addresses for raw, tcp and udp including device and VRF cases.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add IPv6 udp tests to fcnal-test.sh. Covers the permutations of directly
connected addresses, routed destinations, VRF and non-VRF, and expected
failures for both clients and servers. Includes permutations with
net.ipv4.udp_l3mdev_accept set to 0 and 1.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add udp tests to fcnal-test.sh. Covers the permutations of directly
connected addresses, routed destinations, VRF and non-VRF, and expected
failures for both clients and servers. Includes permutations with
net.ipv4.udp_l3mdev_accept set to 0 and 1.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add IPv6 tcp tests to fcnal-test.sh. Covers the permutations of directly
connected addresses, routed destinations, VRF and non-VRF, and expected
failures for both clients and servers. Includes permutations with
net.ipv4.tcp_l3mdev_accept set to 0 and 1.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add tcp tests to fcnal-test.sh. Covers the permutations of directly
connected addresses, routed destinations, VRF and non-VRF, and expected
failures for both clients and servers. Includes permutations with
net.ipv4.tcp_l3mdev_accept set to 0 and 1.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add IPv6 ping tests to fcnal-test.sh. Covers the permutations of directly
connected addresses, routed destinations, VRF and non-VRF, and expected
failures.
Setup includes unreachable routes and fib rules blocking traffic.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add ping tests to fcnal-test.sh. Covers the permutations of directly
connected addresses, routed destinations, VRF and non-VRF, and expected
failures.
Setup includes unreachable routes and fib rules blocking traffic.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Initial commit for functional test suite for fib and socket lookups.
This commit contains the namespace setup, networking config, test options
and other basic infrastructure.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add nettest - a simple program with an implementation for various networking
APIs. nettest is used for tcp, udp and raw functional tests for both IPv4
and IPv6.
Point of this command versus existing utilities:
- controlled implementation of the APIs and the order in which they
are called,
- ability to verify ingress device, local and remote addresses,
- timeout for controlled test length,
- ability to discriminate a timeout from a system call failure, and
- simplicity with test scripts.
The command returns:
0 on success,
1 for any system call failure, and
2 on timeout.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
On my laptop most memcg kselftests were being skipped because it claimed
cgroup v2 hierarchy wasn't mounted, but this isn't correct. Instead, it
seems current systemd HEAD mounts it with the name "cgroup2" instead of
"cgroup":
% grep cgroup /proc/mounts
cgroup2 /sys/fs/cgroup cgroup2 rw,nosuid,nodev,noexec,relatime,nsdelegate 0 0
I can't think of a reason to need to check fs_spec explicitly
since it's arbitrary, so we can just rely on fs_vfstype.
After these changes, `make TARGETS=cgroup kselftest` actually runs the
cgroup v2 tests in more cases.
Link: http://lkml.kernel.org/r/20190723210737.GA487@chrisdown.name
Signed-off-by: Chris Down <chris@chrisdown.name>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The -d command line argument to tdc requires the name of a physical device
on the system where the tests will be run. If -d has not been used, tdc
will skip tests that require a physical device.
This patch is intended to better document what the -d option does and how
it is used.
Signed-off-by: Lucas Bates <lucasb@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Build bot reports some recent TLS tests are failing
with CONFIG_TLS=n. Correct the expected return code
and skip TLS installation if not supported.
Tested with CONFIG_TLS=n and CONFIG_TLS=m.
Reported-by: kernel test robot <rong.a.chen@intel.com>
Fixes: cf32526c8842 ("selftests/tls: add a test for ULP but no keys")
Fixes: 65d41fb317c6 ("selftests/tls: add a bidirectional test")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit dedfde2fe1c4 ("mlxsw: spectrum_dcb: Configure DSCP map as the last
rule is removed") fixed a problem in mlxsw where last DSCP rule to be
removed remained in effect when DSCP rewrite was applied.
Add a selftest that covers this problem.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
These two tests have some problems in the global scope pollution and on
contrary, contain unnecessary local declarations. Fix them.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The livepatching self-tests tweak the dynamic debug config to verify
the kernel log during the tests. Enhance set_dynamic_debug() so that
the config changes are restored when the script exits.
Note this functionality needs to keep in sync with:
- dynamic_debug input/output formatting
- functions affected by set_dynamic_debug()
For example, push_dynamic_debug() transforms:
kernel/livepatch/transition.c:530 [livepatch]klp_init_transition =_ "'%s': initializing %s transition\012"
to the following:
file kernel/livepatch/transition.c line 530 =_
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Tested-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Previously, using "%m" in a ksft_* format string can result in strange
output because the errno value wasn't saved before calling other libc
functions. The solution is to simply save and restore the errno before
we format the user-supplied format string.
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull pidfd fixes from Christian Brauner:
"This makes setting the exit_state in exit_notify() consistent after
fixing the pidfd polling race pre-rc1. Related to the race fix, this
adds a WARN_ON() to do_notify_pidfd() to catch any future exit_state
races.
Last, this removes an obsolete comment from the pidfd tests"
* tag 'for-linus-20190730' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
exit: make setting exit_state consistent
pidfd: Add warning if exit_state is 0 during notification
pidfd: remove obsolete comments from test
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"Minor fixes to tests and one major fix to livepatch test to add skip
handling to avoid false fail reports when livepatch is disabled"
* tag 'linux-kselftest-5.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/livepatch: add test skip handling
selftests: mlxsw: Fix typo in qos_mc_aware.sh
selftests/x86: fix spelling mistake "FAILT" -> "FAIL"
selftests: kmod: Fix typo in kmod.sh
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
perf header:
Vince Weaver:
- Fix divide by zero error if f_header.attr_size==0, found using a perf tool fuzzer.
Numfor Mbiziwo-Tiapo:
- Silence use of uninitialized value warning pointed out by clang's MSAN tool.
libbpf:
Andrii Nakryiko:
- Fix missing __WORDSIZE definition in some systems, such as musl libc (Alpine Linux).
tools header UAPI:
Arnaldo Carvalho de Melo:
- Sync headers to address perf build warnings:
- syscalls_64.tbl and generic unistd.h to pick up clone3 and pidfd_open.
- With new ioctls: kvm.h, drm.h and usbdevice_fs.h.
- No tooling change: mman.h, sched.h and if_link.h.
Documentation:
Vince Weaver:
- Fix perf.data documentation units for memory size, its kB, not bytes.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Since the introduction of CLONE_PIDFD pidfd_send_signal() is independent
of CONFIG_PROC_FS.
Signed-off-by: Christian Brauner <christian@brauner.io>
|
|
hashmap.h depends on __WORDSIZE being defined. It is defined by
glibc/musl in different headers. It's an explicit goal for musl to be
"non-detectable" at compilation time, so instead include glibc header if
glibc is explicitly detected and fall back to musl header otherwise.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Fixes: e3b924224028 ("libbpf: add resizable non-thread safe internal hashmap")
Link: https://lkml.kernel.org/r/20190718173021.2418606-1-andriin@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The perf.data-file-format documentation incorrectly says the
HEADER_TOTAL_MEM results are in bytes. The results are in kilobytes
(perf reads the value from /proc/meminfo)
Signed-off-by: Vince Weaver <vincent.weaver@maine.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/alpine.DEB.2.21.1907251155500.22624@macbook-air
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When building our local version of perf with MSAN (Memory Sanitizer) and
running the perf record command, MSAN throws a use of uninitialized
value warning in "tools/perf/util/util.c:333:6".
This warning stems from the "buf" variable being passed into "write".
It originated as the variable "ev" with the type union perf_event*
defined in the "perf_event__synthesize_attr" function in
"tools/perf/util/header.c".
In the "perf_event__synthesize_attr" function they allocate space with a malloc
call using ev, then go on to only assign some of the member variables before
passing "ev" on as a parameter to the "process" function therefore "ev"
contains uninitialized memory. Changing the malloc call to zalloc to initialize
all the members of "ev" which gets rid of the warning.
To reproduce this warning, build perf by running:
make -C tools/perf CLANG=1 CC=clang EXTRA_CFLAGS="-fsanitize=memory\
-fsanitize-memory-track-origins"
(Additionally, llvm might have to be installed and clang might have to
be specified as the compiler - export CC=/usr/bin/clang)
then running:
tools/perf/perf record -o - ls / | tools/perf/perf --no-pager annotate\
-i - --stdio
Please see the cover letter for why false positive warnings may be
generated.
Signed-off-by: Numfor Mbiziwo-Tiapo <nums@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Drayton <mbd@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20190724234500.253358-2-nums@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
So I have been having lots of trouble with hand-crafted perf.data files
causing segfaults and the like, so I have started fuzzing the perf tool.
First issue found:
If f_header.attr_size is 0 in the perf.data file, then perf will crash
with a divide-by-zero error.
Committer note:
Added a pr_err() to tell the user why the command failed.
Signed-off-by: Vince Weaver <vincent.weaver@maine.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/alpine.DEB.2.21.1907231100440.14532@macbook-air
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the changes in:
07a4ddec3ce9 ("bonding: add an option to specify a delay between peer notifications")
And silence this build warning:
Kernel ABI header at 'tools/include/uapi/linux/if_link.h' differs from latest version at 'include/uapi/linux/if_link.h'
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Vincent Bernat <vincent@bernat.ch>
Link: https://lkml.kernel.org/n/tip-3liw4exxh8goc0rq9xryl2kv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To get the changes in:
a509a7cd7974 ("sched/uclamp: Extend sched_setattr() to support utilization clamping")
1d6362fa0cfc ("sched/core: Allow sched_setattr() to use the current policy")
7f192e3cd316 ("fork: add clone3")
And silence this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/sched.h' differs from latest version at 'include/uapi/linux/sched.h'
diff -u tools/include/uapi/linux/sched.h include/uapi/linux/sched.h
No changes in tools/ due to the above.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Christian Brauner <christian@brauner.io>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Patrick Bellasi <patrick.bellasi@arm.com>
Link: https://lkml.kernel.org/n/tip-mtrpsjrux5hgyr5uf8l1aa46@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To get the changes in:
6d101f24f1dd ("USB: add usbfs ioctl to retrieve the connection parameters")
And address this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/usbdevice_fs.h' differs from latest version at 'include/uapi/linux/usbdevice_fs.h'
diff -u tools/include/uapi/linux/usbdevice_fs.h include/uapi/linux/usbdevice_fs.h
Which ends up autogenerating a ioctl_cmd->string table used by 'perf
trace':
$ tools/perf/trace/beauty/usbdevfs_ioctl.sh > before
$ cp include/uapi/linux/usbdevice_fs.h tools/include/uapi/linux/usbdevice_fs.h
$ tools/perf/trace/beauty/usbdevfs_ioctl.sh > after
$ diff -u before after
--- before 2019-07-26 15:26:55.513636844 -0300
+++ after 2019-07-26 15:29:11.650518677 -0300
@@ -23,6 +23,7 @@
[2] = "BULK",
[30] = "DROP_PRIVILEGES",
[31] = "GET_SPEED",
+ [32] = "CONNINFO_EX",
[3] = "RESETEP",
[4] = "SETINTERFACE",
[5] = "SETCONFIGURATION",
$
Now 'perf trace' ioctl beautifier will translate this new ioctl to a
string and at some point will allow filtering the 'ioctl' syscall with
something like this in a system wide strace-like sessin:
# perf trace -e ioctl/cmd=USBDEVFS_CONNINFO_EX/
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-tkdfbgzqypwco96b309c0ovd@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In addition to _IOW() and _IOR(), to handle this case:
#define USBDEVFS_CONNINFO_EX(len) _IOC(_IOC_READ, 'U', 32, len)
That will happen in the next sync of this header file.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-3br5e4t64e4lp0goo84che3s@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Picking the changes from:
c5d3e39caa45 ("drm/i915: Engine discovery query")
a88b6e4cbafd ("drm/i915: Allow specification of parallel execbuf")
ee1136908e9b ("drm/i915/execlists: Virtual engine bonding")
6d06779e8672 ("drm/i915: Load balancing across a virtual engine")
b81dde719439 ("drm/i915: Allow userspace to clone contexts on creation")
8319f44c0525 ("drm/i915: Re-expose SINGLE_TIMELINE flags for context creation")
e620f7b3a263 ("drm/i915: Extend I915_CONTEXT_PARAM_SSEU to support local ctx->engine[]")
976b55f0e1db ("drm/i915: Allow a context to define its set of engines")
7f3f317a66ca ("drm/i915: Restore control over ppgtt for context creation ABI")
75b3f1cb50bd ("drm: Fix drm.h uapi header for GNU/kFreeBSD")
Silencing these perf build warnings:
Warning: Kernel ABI header at 'tools/include/uapi/drm/drm.h' differs from latest version at 'include/uapi/drm/drm.h'
diff -u tools/include/uapi/drm/drm.h include/uapi/drm/drm.h
Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h'
diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h
Now 'perf trace' and other code that might use the tools/perf/trace/beauty autogenerated
tables will be able to translate this new ioctl code into a string:
$ tools/perf/trace/beauty/drm_ioctl.sh > before
$ cp include/uapi/drm/i915_drm.h tools/include/uapi/drm/i915_drm.h
$ tools/perf/trace/beauty/drm_ioctl.sh > after
$ diff -u before after
--- before 2019-07-26 13:02:22.052723640 -0300
+++ after 2019-07-26 13:02:35.354906036 -0300
@@ -163,4 +163,6 @@
[DRM_COMMAND_BASE + 0x37] = "I915_PERF_ADD_CONFIG",
[DRM_COMMAND_BASE + 0x38] = "I915_PERF_REMOVE_CONFIG",
[DRM_COMMAND_BASE + 0x39] = "I915_QUERY",
+ [DRM_COMMAND_BASE + 0x3a] = "I915_GEM_VM_CREATE",
+ [DRM_COMMAND_BASE + 0x3b] = "I915_GEM_VM_DESTROY",
};
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Eric Anholt <eric@anholt.net>
Cc: James Clarke <jrtc27@jrtc27.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://lkml.kernel.org/n/tip-a9173whgu3h1vo24jgdg5do8@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick up the changes from:
8aa3c927ec10 ("mm/mmap: move common defines to mman-common.h")
22fcea6f85f2 ("mm: move MAP_SYNC to asm-generic/mman-common.h")
0bf5f9492389 ("mm: fix the MAP_UNINITIALIZED flag")
To address the following perf build warnings:
Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/mman-common.h' differs from latest version at 'include/uapi/asm-generic/mman-common.h'
diff -u tools/include/uapi/asm-generic/mman-common.h include/uapi/asm-generic/mman-common.h
Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/mman.h' differs from latest version at 'include/uapi/asm-generic/mman.h'
diff -u tools/include/uapi/asm-generic/mman.h include/uapi/asm-generic/mman.h
That ends up just moving a bit the auto-generated code->string tables:
$ tools/perf/trace/beauty/mmap_flags.sh > before
$ cp include/uapi/asm-generic/mman.h tools/include/uapi/asm-generic/mman.h
$ cp include/uapi/asm-generic/mman-common.h tools/include/uapi/asm-generic/mman-common.h
$ tools/perf/trace/beauty/mmap_flags.sh > after
$ diff -u before after
--- before 2019-07-26 12:45:02.948335904 -0300
+++ after 2019-07-26 12:48:05.342893539 -0300
@@ -4,15 +4,15 @@
[ilog2(0x02) + 1] = "PRIVATE",
[ilog2(0x10) + 1] = "FIXED",
[ilog2(0x20) + 1] = "ANONYMOUS",
+ [ilog2(0x008000) + 1] = "POPULATE",
+ [ilog2(0x010000) + 1] = "NONBLOCK",
+ [ilog2(0x020000) + 1] = "STACK",
+ [ilog2(0x040000) + 1] = "HUGETLB",
+ [ilog2(0x080000) + 1] = "SYNC",
[ilog2(0x100000) + 1] = "FIXED_NOREPLACE",
[ilog2(0x0100) + 1] = "GROWSDOWN",
[ilog2(0x0800) + 1] = "DENYWRITE",
[ilog2(0x1000) + 1] = "EXECUTABLE",
[ilog2(0x2000) + 1] = "LOCKED",
[ilog2(0x4000) + 1] = "NORESERVE",
- [ilog2(0x8000) + 1] = "POPULATE",
- [ilog2(0x10000) + 1] = "NONBLOCK",
- [ilog2(0x20000) + 1] = "STACK",
- [ilog2(0x40000) + 1] = "HUGETLB",
- [ilog2(0x80000) + 1] = "SYNC",
};
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-fzqvzni9megaurmsp0k4vy27@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Thomas Gleixner:
"A pile of perf related fixes:
Kernel:
- Fix SLOTS PEBS event constraints for Icelake CPUs
- Add the missing mask bit to allow counting hardware generated
prefetches on L3 for Icelake CPUs
- Make the test for hypervisor platforms more accurate (as far as
possible)
- Handle PMUs correctly which override event->cpu
- Yet another missing fallthrough annotation
Tools:
perf.data:
- Fix loading of compressed data split across adjacent records
- Fix buffer size setting for processing CPU topology perf.data
header.
perf stat:
- Fix segfault for event group in repeat mode
- Always separate "stalled cycles per insn" line, it was being
appended to the "instructions" line.
perf script:
- Fix --max-blocks man page description.
- Improve man page description of metrics.
- Fix off by one in brstackinsn IPC computation.
perf probe:
- Avoid calling freeing routine multiple times for same pointer.
perf build:
- Do not use -Wshadow on gcc < 4.8, avoiding too strict warnings
treated as errors, breaking the build"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Mark expected switch fall-throughs
perf/core: Fix creating kernel counters for PMUs that override event->cpu
perf/x86: Apply more accurate check on hypervisor platform
perf/x86/intel: Fix invalid Bit 13 for Icelake MSR_OFFCORE_RSP_x register
perf/x86/intel: Fix SLOTS PEBS event constraint
perf build: Do not use -Wshadow on gcc < 4.8
perf probe: Avoid calling freeing routine multiple times for same pointer
perf probe: Set pev->nargs to zero after freeing pev->args entries
perf session: Fix loading of compressed data split across adjacent records
perf stat: Always separate stalled cycles per insn
perf stat: Fix segfault for event group in repeat mode
perf tools: Fix proper buffer size for feature processing
perf script: Fix off by one in brstackinsn IPC computation
perf script: Improve man page description of metrics
perf script: Fix --max-blocks man page description
|
