From ac43c9122e4287bbdbe91e980fc2528acb72cc1e Mon Sep 17 00:00:00 2001 From: Yaxiong Tian Date: Wed, 22 Nov 2023 16:02:43 +0800 Subject: thunderbolt: Fix memory leak in margining_port_remove() The dentry returned by debugfs_lookup() needs to be released by calling dput() which is missing in margining_port_remove(). Fix this by calling debugfs_lookup_and_remove() that combines both and avoids the memory leak. Fixes: d0f1e0c2a699 ("thunderbolt: Add support for receiver lane margining") Cc: stable@vger.kernel.org Signed-off-by: Yaxiong Tian Signed-off-by: Mika Westerberg --- drivers/thunderbolt/debugfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/thunderbolt/debugfs.c b/drivers/thunderbolt/debugfs.c index c9ddd49138d8..e324cd899719 100644 --- a/drivers/thunderbolt/debugfs.c +++ b/drivers/thunderbolt/debugfs.c @@ -959,7 +959,7 @@ static void margining_port_remove(struct tb_port *port) snprintf(dir_name, sizeof(dir_name), "port%d", port->port); parent = debugfs_lookup(dir_name, port->sw->debugfs_dir); if (parent) - debugfs_remove_recursive(debugfs_lookup("margining", parent)); + debugfs_lookup_and_remove("margining", parent); kfree(port->usb4->margining); port->usb4->margining = NULL; -- cgit v1.2.3 From f0b94c1c5c7994a74e487f43c91cfc922105a423 Mon Sep 17 00:00:00 2001 From: Gil Fine Date: Thu, 30 Nov 2023 18:17:13 +0200 Subject: thunderbolt: Fix minimum allocated USB 3.x and PCIe bandwidth With the current bandwidth allocation we end up reserving too much for the USB 3.x and PCIe tunnels that leads to reduced capabilities for the second DisplayPort tunnel. Fix this by decreasing the USB 3.x allocation to 900 Mb/s which then allows both tunnels to get the maximum HBR2 bandwidth. This way, the reserved bandwidth for USB 3.x and PCIe, would be 1350 Mb/s (taking weights of USB 3.x and PCIe into account). So bandwidth allocations on a link are: USB 3.x + PCIe tunnels => 1350 Mb/s DisplayPort tunnel #1 => 17280 Mb/s DisplayPort tunnel #2 => 17280 Mb/s Total consumed bandwidth is 35910 Mb/s. So that all the above can be tunneled on a Gen 3 link (which allows maximum of 36000 Mb/s). Fixes: 582e70b0d3a4 ("thunderbolt: Change bandwidth reservations to comply USB4 v2") Signed-off-by: Gil Fine Signed-off-by: Mika Westerberg --- drivers/thunderbolt/usb4.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/thunderbolt/usb4.c b/drivers/thunderbolt/usb4.c index 4277733d0021..f8f0d24ff6e4 100644 --- a/drivers/thunderbolt/usb4.c +++ b/drivers/thunderbolt/usb4.c @@ -2311,13 +2311,13 @@ int usb4_usb3_port_release_bandwidth(struct tb_port *port, int *upstream_bw, goto err_request; /* - * Always keep 1000 Mb/s to make sure xHCI has at least some + * Always keep 900 Mb/s to make sure xHCI has at least some * bandwidth available for isochronous traffic. */ - if (consumed_up < 1000) - consumed_up = 1000; - if (consumed_down < 1000) - consumed_down = 1000; + if (consumed_up < 900) + consumed_up = 900; + if (consumed_down < 900) + consumed_down = 900; ret = usb4_usb3_port_write_allocated_bandwidth(port, consumed_up, consumed_down); -- cgit v1.2.3 From 13fde9ac23ca8c6d1ac13cc9eefe1f1ac3ee30a4 Mon Sep 17 00:00:00 2001 From: Slark Xiao Date: Fri, 1 Dec 2023 10:09:50 +0800 Subject: USB: serial: option: add Foxconn T99W265 with new baseline This ID was added based on latest SDX12 code base line, and we made some changes with previous 0489:e0db. Test evidence as below: T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 2 P: Vendor=0489 ProdID=e0da Rev=05.04 S: Manufacturer=Qualcomm S: Product=Qualcomm Snapdragon X12 S: SerialNumber=2bda65fb C: #Ifs= 6 Cfg#= 2 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) 0&1: MBIM, 2: Modem, 3:GNSS, 4:Diag, 5:ADB Signed-off-by: Slark Xiao Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 4dffcfefd62d..b46ffe9c8d0d 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -2242,6 +2242,8 @@ static const struct usb_device_id option_ids[] = { .driver_info = RSVD(0) | RSVD(1) | RSVD(6) }, { USB_DEVICE(0x0489, 0xe0b5), /* Foxconn T77W968 ESIM */ .driver_info = RSVD(0) | RSVD(1) | RSVD(6) }, + { USB_DEVICE_INTERFACE_CLASS(0x0489, 0xe0da, 0xff), /* Foxconn T99W265 MBIM variant */ + .driver_info = RSVD(3) | RSVD(5) }, { USB_DEVICE_INTERFACE_CLASS(0x0489, 0xe0db, 0xff), /* Foxconn T99W265 MBIM */ .driver_info = RSVD(3) }, { USB_DEVICE_INTERFACE_CLASS(0x0489, 0xe0ee, 0xff), /* Foxconn T99W368 MBIM */ -- cgit v1.2.3 From 06f22cd6635bdae7d73566fca9879b2026a08e00 Mon Sep 17 00:00:00 2001 From: Reinhard Speyerer Date: Tue, 12 Dec 2023 18:15:38 +0100 Subject: USB: serial: option: add Quectel RM500Q R13 firmware support Add support for Quectel RM500Q R13 firmware which uses Prot=40 for the NMEA port: T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 8 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=2c7c ProdID=0800 Rev= 4.14 S: Manufacturer=Quectel S: Product=RM500Q-AE S: SerialNumber=xxxxxxxx C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=896mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms Signed-off-by: Reinhard Speyerer Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index b46ffe9c8d0d..715d53c33525 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1232,6 +1232,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, 0x0700, 0xff), /* BG95 */ .driver_info = RSVD(3) | ZLP }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0xff, 0x30) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0, 0x40) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0xff, 0x10), .driver_info = ZLP }, -- cgit v1.2.3 From aef05e349bfd81c95adb4489639413fadbb74a83 Mon Sep 17 00:00:00 2001 From: Jose Ignacio Tornos Martinez Date: Thu, 7 Dec 2023 18:50:07 +0100 Subject: net: usb: ax88179_178a: avoid failed operations when device is disconnected When the device is disconnected we get the following messages showing failed operations: Nov 28 20:22:11 localhost kernel: usb 2-3: USB disconnect, device number 2 Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: unregister 'ax88179_178a' usb-0000:02:00.0-3, ASIX AX88179 USB 3.0 Gigabit Ethernet Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: Failed to read reg index 0x0002: -19 Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: Failed to write reg index 0x0002: -19 Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0002: -19 Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0001: -19 Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0002: -19 The reason is that although the device is detached, normal stop and unbind operations are commanded from the driver. These operations are not necessary in this situation, so avoid these logs when the device is detached if the result of the operation is -ENODEV and if the new flag informing about the disconnecting status is enabled. cc: Fixes: e2ca90c276e1f ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver") Signed-off-by: Jose Ignacio Tornos Martinez Acked-by: Alan Stern Link: https://lore.kernel.org/r/20231207175007.263907-1-jtornosm@redhat.com Signed-off-by: Greg Kroah-Hartman --- drivers/net/usb/ax88179_178a.c | 23 ++++++++++++++++++++--- 1 file changed, 20 insertions(+), 3 deletions(-) diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c index 4ea0e155bb0d..5a1bf42ce156 100644 --- a/drivers/net/usb/ax88179_178a.c +++ b/drivers/net/usb/ax88179_178a.c @@ -173,6 +173,7 @@ struct ax88179_data { u8 in_pm; u32 wol_supported; u32 wolopts; + u8 disconnecting; }; struct ax88179_int_data { @@ -208,6 +209,7 @@ static int __ax88179_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index, { int ret; int (*fn)(struct usbnet *, u8, u8, u16, u16, void *, u16); + struct ax88179_data *ax179_data = dev->driver_priv; BUG_ON(!dev); @@ -219,7 +221,7 @@ static int __ax88179_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index, ret = fn(dev, cmd, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, value, index, data, size); - if (unlikely(ret < 0)) + if (unlikely((ret < 0) && !(ret == -ENODEV && ax179_data->disconnecting))) netdev_warn(dev->net, "Failed to read reg index 0x%04x: %d\n", index, ret); @@ -231,6 +233,7 @@ static int __ax88179_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index, { int ret; int (*fn)(struct usbnet *, u8, u8, u16, u16, const void *, u16); + struct ax88179_data *ax179_data = dev->driver_priv; BUG_ON(!dev); @@ -242,7 +245,7 @@ static int __ax88179_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index, ret = fn(dev, cmd, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, value, index, data, size); - if (unlikely(ret < 0)) + if (unlikely((ret < 0) && !(ret == -ENODEV && ax179_data->disconnecting))) netdev_warn(dev->net, "Failed to write reg index 0x%04x: %d\n", index, ret); @@ -492,6 +495,20 @@ static int ax88179_resume(struct usb_interface *intf) return usbnet_resume(intf); } +static void ax88179_disconnect(struct usb_interface *intf) +{ + struct usbnet *dev = usb_get_intfdata(intf); + struct ax88179_data *ax179_data; + + if (!dev) + return; + + ax179_data = dev->driver_priv; + ax179_data->disconnecting = 1; + + usbnet_disconnect(intf); +} + static void ax88179_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo) { @@ -1906,7 +1923,7 @@ static struct usb_driver ax88179_178a_driver = { .suspend = ax88179_suspend, .resume = ax88179_resume, .reset_resume = ax88179_resume, - .disconnect = usbnet_disconnect, + .disconnect = ax88179_disconnect, .supports_autosuspend = 1, .disable_hub_initiated_lpm = 1, }; -- cgit v1.2.3 From c994cb596bf7ef5928f06331c76f46e071b16f09 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Fri, 8 Dec 2023 13:36:02 +0100 Subject: usb: typec: ucsi: fix gpio-based orientation detection Fix the recently added connector sanity check which was off by one and prevented orientation notifications from being handled correctly for the second port when using GPIOs to determine orientation. Fixes: c6165ed2f425 ("usb: ucsi: glink: use the connector orientation GPIO to provide switch events") Cc: stable Cc: Neil Armstrong Signed-off-by: Johan Hovold Reviewed-by: Dmitry Baryshkov Reviewed-by: Heikki Krogerus Link: https://lore.kernel.org/r/20231208123603.29957-1-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/ucsi/ucsi_glink.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/typec/ucsi/ucsi_glink.c b/drivers/usb/typec/ucsi/ucsi_glink.c index db6e248f8208..4853141cd10c 100644 --- a/drivers/usb/typec/ucsi/ucsi_glink.c +++ b/drivers/usb/typec/ucsi/ucsi_glink.c @@ -228,7 +228,7 @@ static void pmic_glink_ucsi_notify(struct work_struct *work) con_num = UCSI_CCI_CONNECTOR(cci); if (con_num) { - if (con_num < PMIC_GLINK_MAX_PORTS && + if (con_num <= PMIC_GLINK_MAX_PORTS && ucsi->port_orientation[con_num - 1]) { int orientation = gpiod_get_value(ucsi->port_orientation[con_num - 1]); -- cgit v1.2.3 From 772685c14743ad565bb271041ad3c262298cd6fc Mon Sep 17 00:00:00 2001 From: Tasos Sahanidis Date: Thu, 7 Dec 2023 15:44:41 +0200 Subject: usb-storage: Add quirk for incorrect WP on Kingston DT Ultimate 3.0 G3 This flash drive reports write protect during the first mode sense. In the past this was not an issue as the kernel called revalidate twice, thus asking the device for its write protect status twice, with write protect being disabled in the second mode sense. However, since commit 1e029397d12f ("scsi: sd: Reorganize DIF/DIX code to avoid calling revalidate twice") that is no longer the case, thus the device shows up read only. [490891.289495] sd 12:0:0:0: [sdl] Write Protect is on [490891.289497] sd 12:0:0:0: [sdl] Mode Sense: 2b 00 80 08 This does not appear to be a timing issue, as enabling the usbcore quirk USB_QUIRK_DELAY_INIT has no effect on write protect. Fixes: 1e029397d12f ("scsi: sd: Reorganize DIF/DIX code to avoid calling revalidate twice") Cc: stable Signed-off-by: Tasos Sahanidis Acked-by: Alan Stern Reviewed-by: Martin K. Petersen Link: https://lore.kernel.org/r/20231207134441.298131-1-tasos@tasossah.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 20dcbccb290b..fd68204374f2 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1305,6 +1305,17 @@ UNUSUAL_DEV( 0x090c, 0x6000, 0x0100, 0x0100, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_INITIAL_READ10 ), +/* + * Patch by Tasos Sahanidis + * This flash drive always shows up with write protect enabled + * during the first mode sense. + */ +UNUSUAL_DEV(0x0951, 0x1697, 0x0100, 0x0100, + "Kingston", + "DT Ultimate G3", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_NO_WP_DETECT), + /* * This Pentax still camera is not conformant * to the USB storage specification: - -- cgit v1.2.3 From 7fbcd195e2b8cc952e4aeaeb50867b798040314c Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 13 Dec 2023 16:22:43 +0300 Subject: usb: fotg210-hcd: delete an incorrect bounds test Here "temp" is the number of characters that we have written and "size" is the size of the buffer. The intent was clearly to say that if we have written to the end of the buffer then stop. However, for that to work the comparison should have been done on the original "size" value instead of the "size -= temp" value. Not only will that not trigger when we want to, but there is a small chance that it will trigger incorrectly before we want it to and we break from the loop slightly earlier than intended. This code was recently changed from using snprintf() to scnprintf(). With snprintf() we likely would have continued looping and passed a negative size parameter to snprintf(). This would have triggered an annoying WARN(). Now that we have converted to scnprintf() "size" will never drop below 1 and there is no real need for this test. We could change the condition to "if (temp <= 1) goto done;" but just deleting the test is cleanest. Fixes: 7d50195f6c50 ("usb: host: Faraday fotg210-hcd driver") Cc: stable Signed-off-by: Dan Carpenter Reviewed-by: Linus Walleij Reviewed-by: Lee Jones Link: https://lore.kernel.org/r/ZXmwIwHe35wGfgzu@suswa Signed-off-by: Greg Kroah-Hartman --- drivers/usb/fotg210/fotg210-hcd.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/usb/fotg210/fotg210-hcd.c b/drivers/usb/fotg210/fotg210-hcd.c index 929106c16b29..7bf810a0c98a 100644 --- a/drivers/usb/fotg210/fotg210-hcd.c +++ b/drivers/usb/fotg210/fotg210-hcd.c @@ -428,8 +428,6 @@ static void qh_lines(struct fotg210_hcd *fotg210, struct fotg210_qh *qh, temp = size; size -= temp; next += temp; - if (temp == size) - goto done; } temp = snprintf(next, size, "\n"); @@ -439,7 +437,6 @@ static void qh_lines(struct fotg210_hcd *fotg210, struct fotg210_qh *qh, size -= temp; next += temp; -done: *sizep = size; *nextp = next; } -- cgit v1.2.3 From 513d88a88e0203188a38f4647dd08170aebd85df Mon Sep 17 00:00:00 2001 From: Mark Glover Date: Wed, 20 Dec 2023 13:57:40 +0000 Subject: USB: serial: ftdi_sio: update Actisense PIDs constant names Update the constant names for unused USB PIDs (product identifiers) to reflect the new products now using the PIDs. Signed-off-by: Mark Glover Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold --- drivers/usb/serial/ftdi_sio.c | 6 +++--- drivers/usb/serial/ftdi_sio_ids.h | 6 +++--- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 1bf23611be12..13a56783830d 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1033,9 +1033,9 @@ static const struct usb_device_id id_table_combined[] = { { USB_DEVICE(FTDI_VID, ACTISENSE_USG_PID) }, { USB_DEVICE(FTDI_VID, ACTISENSE_NGT_PID) }, { USB_DEVICE(FTDI_VID, ACTISENSE_NGW_PID) }, - { USB_DEVICE(FTDI_VID, ACTISENSE_D9AC_PID) }, - { USB_DEVICE(FTDI_VID, ACTISENSE_D9AD_PID) }, - { USB_DEVICE(FTDI_VID, ACTISENSE_D9AE_PID) }, + { USB_DEVICE(FTDI_VID, ACTISENSE_UID_PID) }, + { USB_DEVICE(FTDI_VID, ACTISENSE_USA_PID) }, + { USB_DEVICE(FTDI_VID, ACTISENSE_NGX_PID) }, { USB_DEVICE(FTDI_VID, ACTISENSE_D9AF_PID) }, { USB_DEVICE(FTDI_VID, CHETCO_SEAGAUGE_PID) }, { USB_DEVICE(FTDI_VID, CHETCO_SEASWITCH_PID) }, diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index e2099445db70..21a2b5a25fc0 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -1568,9 +1568,9 @@ #define ACTISENSE_USG_PID 0xD9A9 /* USG USB Serial Adapter */ #define ACTISENSE_NGT_PID 0xD9AA /* NGT NMEA2000 Interface */ #define ACTISENSE_NGW_PID 0xD9AB /* NGW NMEA2000 Gateway */ -#define ACTISENSE_D9AC_PID 0xD9AC /* Actisense Reserved */ -#define ACTISENSE_D9AD_PID 0xD9AD /* Actisense Reserved */ -#define ACTISENSE_D9AE_PID 0xD9AE /* Actisense Reserved */ +#define ACTISENSE_UID_PID 0xD9AC /* USB Isolating Device */ +#define ACTISENSE_USA_PID 0xD9AD /* USB to Serial Adapter */ +#define ACTISENSE_NGX_PID 0xD9AE /* NGX NMEA2000 Gateway */ #define ACTISENSE_D9AF_PID 0xD9AF /* Actisense Reserved */ #define CHETCO_SEAGAUGE_PID 0xA548 /* SeaGauge USB Adapter */ #define CHETCO_SEASWITCH_PID 0xA549 /* SeaSwitch USB Adapter */ -- cgit v1.2.3 From 6d79d9434c69bb8ffa8a631050eb0ad6b83d3e90 Mon Sep 17 00:00:00 2001 From: Alper Ak Date: Tue, 8 Aug 2023 13:51:58 +0300 Subject: USB: serial: option: add Quectel EG912Y module support Add Quectel EG912Y "DIAG, AT, MODEM" 0x6001: ECM / RNDIS + DIAG + AT + MODEM T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=6001 Rev= 3.18 S: Manufacturer=Android S: Product=Android S: SerialNumber=0000 C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=06 Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=4096ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0c(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0b(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=4096ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=88(I) Atr=03(Int.) MxPS= 64 Ivl=4096ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0a(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Alper Ak Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 715d53c33525..72390dbf0769 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -272,6 +272,7 @@ static void option_instat_callback(struct urb *urb); #define QUECTEL_PRODUCT_RM500Q 0x0800 #define QUECTEL_PRODUCT_RM520N 0x0801 #define QUECTEL_PRODUCT_EC200U 0x0901 +#define QUECTEL_PRODUCT_EG912Y 0x6001 #define QUECTEL_PRODUCT_EC200S_CN 0x6002 #define QUECTEL_PRODUCT_EC200A 0x6005 #define QUECTEL_PRODUCT_EM061K_LWW 0x6008 @@ -1245,6 +1246,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200U, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200S_CN, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200T, 0xff, 0, 0) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG912Y, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500K, 0xff, 0x00, 0x00) }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6001) }, -- cgit v1.2.3