From 970e2486492aa1eb47a436a5a4c81e92558986a9 Mon Sep 17 00:00:00 2001 From: Lucas De Marchi Date: Fri, 30 Mar 2012 13:37:16 -0700 Subject: Documentation: remove references to /etc/modprobe.conf Usage of /etc/modprobe.conf file was deprecated by module-init-tools and is no longer parsed by new kmod tool. References to this file are replaced in Documentation, comments and Kconfig according to the context. There are also some references to the old /etc/modules.conf from 2.4 kernels that are being removed. Signed-off-by: Lucas De Marchi Acked-by: Takashi Iwai Acked-by: Mauro Carvalho Chehab Signed-off-by: Randy Dunlap Signed-off-by: Linus Torvalds --- Documentation/aoe/aoe.txt | 2 +- Documentation/aoe/autoload.sh | 4 +-- Documentation/blockdev/floppy.txt | 2 +- Documentation/fb/intel810.txt | 2 +- Documentation/fb/intelfb.txt | 2 +- Documentation/i2c/busses/scx200_acb | 2 +- Documentation/ide/ide.txt | 2 +- Documentation/isdn/README.gigaset | 16 ++++----- Documentation/laptops/sonypi.txt | 2 +- Documentation/mono.txt | 8 ++--- Documentation/networking/baycom.txt | 2 +- Documentation/networking/bonding.txt | 43 +++++++++++-------------- Documentation/networking/dl2k.txt | 11 ++++--- Documentation/networking/e100.txt | 6 ++-- Documentation/networking/ipv6.txt | 6 ++-- Documentation/networking/ixgb.txt | 6 ++-- Documentation/networking/ltpc.txt | 2 +- Documentation/networking/vortex.txt | 6 ++-- Documentation/parport.txt | 13 ++++---- Documentation/s390/3270.txt | 21 ++++++------ Documentation/scsi/aic79xx.txt | 2 +- Documentation/scsi/aic7xxx.txt | 2 +- Documentation/scsi/osst.txt | 2 +- Documentation/serial/computone.txt | 8 ++--- Documentation/serial/rocket.txt | 2 +- Documentation/serial/stallion.txt | 4 +-- Documentation/sound/alsa/ALSA-Configuration.txt | 10 +++--- Documentation/sound/alsa/Audiophile-Usb.txt | 4 +-- Documentation/sound/alsa/MIXART.txt | 6 ++-- Documentation/sound/alsa/OSS-Emulation.txt | 2 +- Documentation/sound/oss/AudioExcelDSP16 | 6 ++-- Documentation/sound/oss/CMI8330 | 5 ++- Documentation/sound/oss/Introduction | 10 +++--- Documentation/sound/oss/Opti | 8 ++--- Documentation/sound/oss/PAS16 | 4 +-- Documentation/sound/oss/README.modules | 8 ++--- Documentation/usb/power-management.txt | 3 +- Documentation/video4linux/CQcam.txt | 14 ++------ Documentation/video4linux/Zoran | 2 +- Documentation/video4linux/bttv/Modules.conf | 2 +- Documentation/video4linux/meye.txt | 2 +- drivers/net/wan/Kconfig | 4 +-- drivers/scsi/aic7xxx/aic79xx_osm.c | 8 ++--- drivers/scsi/aic7xxx/aic7xxx_osm.c | 8 ++--- drivers/staging/asus_oled/README | 2 +- drivers/tty/isicom.c | 2 +- drivers/usb/serial/ftdi_sio.c | 3 +- drivers/usb/storage/Kconfig | 2 +- sound/core/seq/seq_dummy.c | 2 +- sound/drivers/Kconfig | 3 +- 50 files changed, 138 insertions(+), 160 deletions(-) diff --git a/Documentation/aoe/aoe.txt b/Documentation/aoe/aoe.txt index b5aada9f20cc..5f5aa16047ff 100644 --- a/Documentation/aoe/aoe.txt +++ b/Documentation/aoe/aoe.txt @@ -35,7 +35,7 @@ CREATING DEVICE NODES sh Documentation/aoe/mkshelf.sh /dev/etherd 0 There is also an autoload script that shows how to edit - /etc/modprobe.conf to ensure that the aoe module is loaded when + /etc/modprobe.d/aoe.conf to ensure that the aoe module is loaded when necessary. USING DEVICE NODES diff --git a/Documentation/aoe/autoload.sh b/Documentation/aoe/autoload.sh index 78dad1334c6f..815dff4691c9 100644 --- a/Documentation/aoe/autoload.sh +++ b/Documentation/aoe/autoload.sh @@ -1,8 +1,8 @@ #!/bin/sh # set aoe to autoload by installing the -# aliases in /etc/modprobe.conf +# aliases in /etc/modprobe.d/ -f=/etc/modprobe.conf +f=/etc/modprobe.d/aoe.conf if test ! -r $f || test ! -w $f; then echo "cannot configure $f for module autoloading" 1>&2 diff --git a/Documentation/blockdev/floppy.txt b/Documentation/blockdev/floppy.txt index 6ccab88705cb..470fe4b5e379 100644 --- a/Documentation/blockdev/floppy.txt +++ b/Documentation/blockdev/floppy.txt @@ -49,7 +49,7 @@ you can put: options floppy omnibook messages -in /etc/modprobe.conf. +in a configuration file in /etc/modprobe.d/. The floppy driver related options are: diff --git a/Documentation/fb/intel810.txt b/Documentation/fb/intel810.txt index be3e7836abef..a8e9f5bca6f3 100644 --- a/Documentation/fb/intel810.txt +++ b/Documentation/fb/intel810.txt @@ -211,7 +211,7 @@ Using the same setup as described above, load the module like this: modprobe i810fb vram=2 xres=1024 bpp=8 hsync1=30 hsync2=55 vsync1=50 \ vsync2=85 accel=1 mtrr=1 -Or just add the following to /etc/modprobe.conf +Or just add the following to a configuration file in /etc/modprobe.d/ options i810fb vram=2 xres=1024 bpp=16 hsync1=30 hsync2=55 vsync1=50 \ vsync2=85 accel=1 mtrr=1 diff --git a/Documentation/fb/intelfb.txt b/Documentation/fb/intelfb.txt index dd9e944ea628..feac4e4d6968 100644 --- a/Documentation/fb/intelfb.txt +++ b/Documentation/fb/intelfb.txt @@ -120,7 +120,7 @@ Using the same setup as described above, load the module like this: modprobe intelfb mode=800x600-32@75 vram=8 accel=1 hwcursor=1 -Or just add the following to /etc/modprobe.conf +Or just add the following to a configuration file in /etc/modprobe.d/ options intelfb mode=800x600-32@75 vram=8 accel=1 hwcursor=1 diff --git a/Documentation/i2c/busses/scx200_acb b/Documentation/i2c/busses/scx200_acb index 7c07883d4dfc..ce83c871fe95 100644 --- a/Documentation/i2c/busses/scx200_acb +++ b/Documentation/i2c/busses/scx200_acb @@ -28,5 +28,5 @@ If the scx200_acb driver is built into the kernel, add the following parameter to your boot command line: scx200_acb.base=0x810,0x820 If the scx200_acb driver is built as a module, add the following line to -the file /etc/modprobe.conf instead: +a configuration file in /etc/modprobe.d/ instead: options scx200_acb base=0x810,0x820 diff --git a/Documentation/ide/ide.txt b/Documentation/ide/ide.txt index e77bebfa7b0d..7aca987c23d9 100644 --- a/Documentation/ide/ide.txt +++ b/Documentation/ide/ide.txt @@ -169,7 +169,7 @@ When using ide.c as a module in combination with kmod, add: alias block-major-3 ide-probe -to /etc/modprobe.conf. +to a configuration file in /etc/modprobe.d/. When ide.c is used as a module, you can pass command line parameters to the driver using the "options=" keyword to insmod, while replacing any ',' with diff --git a/Documentation/isdn/README.gigaset b/Documentation/isdn/README.gigaset index ef3343eaa002..7534c6039adc 100644 --- a/Documentation/isdn/README.gigaset +++ b/Documentation/isdn/README.gigaset @@ -97,8 +97,7 @@ GigaSet 307x Device Driver 2.5.): 1=on (default), 0=off Depending on your distribution you may want to create a separate module - configuration file /etc/modprobe.d/gigaset for these, or add them to a - custom file like /etc/modprobe.conf.local. + configuration file like /etc/modprobe.d/gigaset.conf for these. 2.2. Device nodes for user space programs ------------------------------------ @@ -212,8 +211,8 @@ GigaSet 307x Device Driver options ppp_async flag_time=0 - to an appropriate module configuration file, like /etc/modprobe.d/gigaset - or /etc/modprobe.conf.local. + to an appropriate module configuration file, like + /etc/modprobe.d/gigaset.conf. Unimodem mode is needed for making some devices [e.g. SX100] work which do not support the regular Gigaset command set. If debug output (see @@ -237,8 +236,8 @@ GigaSet 307x Device Driver modprobe usb_gigaset startmode=0 or by adding a line like options usb_gigaset startmode=0 - to an appropriate module configuration file, like /etc/modprobe.d/gigaset - or /etc/modprobe.conf.local. + to an appropriate module configuration file, like + /etc/modprobe.d/gigaset.conf 2.6. Call-ID (CID) mode ------------------ @@ -310,7 +309,7 @@ GigaSet 307x Device Driver options isdn dialtimeout=15 - to /etc/modprobe.d/gigaset, /etc/modprobe.conf.local or a similar file. + to /etc/modprobe.d/gigaset.conf or a similar file. Problem: The isdnlog program emits error messages or just doesn't work. @@ -350,8 +349,7 @@ GigaSet 307x Device Driver The initial value can be set using the debug parameter when loading the module "gigaset", e.g. by adding a line options gigaset debug=0 - to your module configuration file, eg. /etc/modprobe.d/gigaset or - /etc/modprobe.conf.local. + to your module configuration file, eg. /etc/modprobe.d/gigaset.conf Generated debugging information can be found - as output of the command diff --git a/Documentation/laptops/sonypi.txt b/Documentation/laptops/sonypi.txt index 4857acfc50f1..606bdb9ce036 100644 --- a/Documentation/laptops/sonypi.txt +++ b/Documentation/laptops/sonypi.txt @@ -110,7 +110,7 @@ Module use: ----------- In order to automatically load the sonypi module on use, you can put those -lines in your /etc/modprobe.conf file: +lines a configuration file in /etc/modprobe.d/: alias char-major-10-250 sonypi options sonypi minor=250 diff --git a/Documentation/mono.txt b/Documentation/mono.txt index e8e1758e87da..d01ac6052194 100644 --- a/Documentation/mono.txt +++ b/Documentation/mono.txt @@ -38,11 +38,11 @@ if [ ! -e /proc/sys/fs/binfmt_misc/register ]; then /sbin/modprobe binfmt_misc # Some distributions, like Fedora Core, perform # the following command automatically when the - # binfmt_misc module is loaded into the kernel. + # binfmt_misc module is loaded into the kernel + # or during normal boot up (systemd-based systems). # Thus, it is possible that the following line - # is not needed at all. Look at /etc/modprobe.conf - # to check whether this is applicable or not. - mount -t binfmt_misc none /proc/sys/fs/binfmt_misc + # is not needed at all. + mount -t binfmt_misc none /proc/sys/fs/binfmt_misc fi # Register support for .NET CLR binaries diff --git a/Documentation/networking/baycom.txt b/Documentation/networking/baycom.txt index 4e68849d5639..688f18fd4467 100644 --- a/Documentation/networking/baycom.txt +++ b/Documentation/networking/baycom.txt @@ -93,7 +93,7 @@ Every time a driver is inserted into the kernel, it has to know which modems it should access at which ports. This can be done with the setbaycom utility. If you are only using one modem, you can also configure the driver from the insmod command line (or by means of an option line in -/etc/modprobe.conf). +/etc/modprobe.d/*.conf). Examples: modprobe baycom_ser_fdx mode="ser12*" iobase=0x3f8 irq=4 diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt index 080ad26690ae..d5e869814040 100644 --- a/Documentation/networking/bonding.txt +++ b/Documentation/networking/bonding.txt @@ -173,9 +173,8 @@ bonding module at load time, or are specified via sysfs. Module options may be given as command line arguments to the insmod or modprobe command, but are usually specified in either the -/etc/modules.conf or /etc/modprobe.conf configuration file, or in a -distro-specific configuration file (some of which are detailed in the next -section). +/etc/modrobe.d/*.conf configuration files, or in a distro-specific +configuration file (some of which are detailed in the next section). Details on bonding support for sysfs is provided in the "Configuring Bonding Manually via Sysfs" section, below. @@ -1021,7 +1020,7 @@ ifcfg-bondX files. Because the sysconfig scripts supply the bonding module options in the ifcfg-bondX file, it is not necessary to add them to -the system /etc/modules.conf or /etc/modprobe.conf configuration file. +the system /etc/modules.d/*.conf configuration files. 3.2 Configuration with Initscripts Support ------------------------------------------ @@ -1098,15 +1097,13 @@ queried targets, e.g., arp_ip_target=+192.168.1.1 arp_ip_target=+192.168.1.2 is the proper syntax to specify multiple targets. When specifying -options via BONDING_OPTS, it is not necessary to edit /etc/modules.conf or -/etc/modprobe.conf. +options via BONDING_OPTS, it is not necessary to edit /etc/modprobe.d/*.conf. For even older versions of initscripts that do not support -BONDING_OPTS, it is necessary to edit /etc/modules.conf (or -/etc/modprobe.conf, depending upon your distro) to load the bonding module -with your desired options when the bond0 interface is brought up. The -following lines in /etc/modules.conf (or modprobe.conf) will load the -bonding module, and select its options: +BONDING_OPTS, it is necessary to edit /etc/modprobe.d/*.conf, depending upon +your distro) to load the bonding module with your desired options when the +bond0 interface is brought up. The following lines in /etc/modprobe.d/*.conf +will load the bonding module, and select its options: alias bond0 bonding options bond0 mode=balance-alb miimon=100 @@ -1152,7 +1149,7 @@ knowledge of bonding. One such distro is SuSE Linux Enterprise Server version 8. The general method for these systems is to place the bonding -module parameters into /etc/modules.conf or /etc/modprobe.conf (as +module parameters into a config file in /etc/modprobe.d/ (as appropriate for the installed distro), then add modprobe and/or ifenslave commands to the system's global init script. The name of the global init script differs; for sysconfig, it is @@ -1228,7 +1225,7 @@ network initialization scripts. specify a different name for each instance (the module loading system requires that every loaded module, even multiple instances of the same module, have a unique name). This is accomplished by supplying multiple -sets of bonding options in /etc/modprobe.conf, for example: +sets of bonding options in /etc/modprobe.d/*.conf, for example: alias bond0 bonding options bond0 -o bond0 mode=balance-rr miimon=100 @@ -1793,8 +1790,8 @@ route additions may cause trouble. On systems with network configuration scripts that do not associate physical devices directly with network interface names (so that the same physical device always has the same "ethX" name), it may -be necessary to add some special logic to either /etc/modules.conf or -/etc/modprobe.conf (depending upon which is installed on the system). +be necessary to add some special logic to config files in +/etc/modprobe.d/. For example, given a modules.conf containing the following: @@ -1821,20 +1818,16 @@ add above bonding e1000 tg3 bonding is loaded. This command is fully documented in the modules.conf manual page. - On systems utilizing modprobe.conf (or modprobe.conf.local), -an equivalent problem can occur. In this case, the following can be -added to modprobe.conf (or modprobe.conf.local, as appropriate), as -follows (all on one line; it has been split here for clarity): + On systems utilizing modprobe an equivalent problem can occur. +In this case, the following can be added to config files in +/etc/modprobe.d/ as: install bonding /sbin/modprobe tg3; /sbin/modprobe e1000; /sbin/modprobe --ignore-install bonding - This will, when loading the bonding module, rather than -performing the normal action, instead execute the provided command. -This command loads the device drivers in the order needed, then calls -modprobe with --ignore-install to cause the normal action to then take -place. Full documentation on this can be found in the modprobe.conf -and modprobe manual pages. + This will load tg3 and e1000 modules before loading the bonding one. +Full documentation on this can be found in the modprobe.d and modprobe +manual pages. 8.3. Painfully Slow Or No Failed Link Detection By Miimon --------------------------------------------------------- diff --git a/Documentation/networking/dl2k.txt b/Documentation/networking/dl2k.txt index 10e8490fa406..cba74f7a3abc 100644 --- a/Documentation/networking/dl2k.txt +++ b/Documentation/networking/dl2k.txt @@ -45,12 +45,13 @@ Now eth0 should active, you can test it by "ping" or get more information by "ifconfig". If tested ok, continue the next step. 4. cp dl2k.ko /lib/modules/`uname -r`/kernel/drivers/net -5. Add the following line to /etc/modprobe.conf: +5. Add the following line to /etc/modprobe.d/dl2k.conf: alias eth0 dl2k -6. Run "netconfig" or "netconf" to create configuration script ifcfg-eth0 +6. Run depmod to updated module indexes. +7. Run "netconfig" or "netconf" to create configuration script ifcfg-eth0 located at /etc/sysconfig/network-scripts or create it manually. [see - Configuration Script Sample] -7. Driver will automatically load and configure at next boot time. +8. Driver will automatically load and configure at next boot time. Compiling the Driver ==================== @@ -154,8 +155,8 @@ Installing the Driver ----------------- 1. Copy dl2k.o to the network modules directory, typically /lib/modules/2.x.x-xx/net or /lib/modules/2.x.x/kernel/drivers/net. - 2. Locate the boot module configuration file, most commonly modprobe.conf - or modules.conf (for 2.4) in the /etc directory. Add the following lines: + 2. Locate the boot module configuration file, most commonly in the + /etc/modprobe.d/ directory. Add the following lines: alias ethx dl2k options dl2k diff --git a/Documentation/networking/e100.txt b/Documentation/networking/e100.txt index 162f323a7a1f..fcb6c71cdb69 100644 --- a/Documentation/networking/e100.txt +++ b/Documentation/networking/e100.txt @@ -94,8 +94,8 @@ Additional Configurations Configuring a network driver to load properly when the system is started is distribution dependent. Typically, the configuration process involves adding - an alias line to /etc/modules.conf or /etc/modprobe.conf as well as editing - other system startup scripts and/or configuration files. Many popular Linux + an alias line to /etc/modprobe.d/*.conf as well as editing other system + startup scripts and/or configuration files. Many popular Linux distributions ship with tools to make these changes for you. To learn the proper way to configure a network device for your system, refer to your distribution documentation. If during this process you are asked for the @@ -103,7 +103,7 @@ Additional Configurations PRO/100 Family of Adapters is e100. As an example, if you install the e100 driver for two PRO/100 adapters - (eth0 and eth1), add the following to modules.conf or modprobe.conf: + (eth0 and eth1), add the following to a configuraton file in /etc/modprobe.d/ alias eth0 e100 alias eth1 e100 diff --git a/Documentation/networking/ipv6.txt b/Documentation/networking/ipv6.txt index 9fd7e21296c8..6cd74fa55358 100644 --- a/Documentation/networking/ipv6.txt +++ b/Documentation/networking/ipv6.txt @@ -2,9 +2,9 @@ Options for the ipv6 module are supplied as parameters at load time. Module options may be given as command line arguments to the insmod -or modprobe command, but are usually specified in either the -/etc/modules.conf or /etc/modprobe.conf configuration file, or in a -distro-specific configuration file. +or modprobe command, but are usually specified in either +/etc/modules.d/*.conf configuration files, or in a distro-specific +configuration file. The available ipv6 module parameters are listed below. If a parameter is not specified the default value is used. diff --git a/Documentation/networking/ixgb.txt b/Documentation/networking/ixgb.txt index e196f16df313..d75a1f9565bb 100644 --- a/Documentation/networking/ixgb.txt +++ b/Documentation/networking/ixgb.txt @@ -274,9 +274,9 @@ Additional Configurations ------------------------------------------------- Configuring a network driver to load properly when the system is started is distribution dependent. Typically, the configuration process involves adding - an alias line to /etc/modprobe.conf as well as editing other system startup - scripts and/or configuration files. Many popular Linux distributions ship - with tools to make these changes for you. To learn the proper way to + an alias line to files in /etc/modprobe.d/ as well as editing other system + startup scripts and/or configuration files. Many popular Linux distributions + ship with tools to make these changes for you. To learn the proper way to configure a network device for your system, refer to your distribution documentation. If during this process you are asked for the driver or module name, the name for the Linux Base Driver for the Intel 10GbE Family of diff --git a/Documentation/networking/ltpc.txt b/Documentation/networking/ltpc.txt index fe2a9129d959..0bf3220c715b 100644 --- a/Documentation/networking/ltpc.txt +++ b/Documentation/networking/ltpc.txt @@ -25,7 +25,7 @@ the driver will try to determine them itself. If you load the driver as a module, you can pass the parameters "io=", "irq=", and "dma=" on the command line with insmod or modprobe, or add -them as options in /etc/modprobe.conf: +them as options in a configuration file in /etc/modprobe.d/ directory: alias lt0 ltpc # autoload the module when the interface is configured options ltpc io=0x240 irq=9 dma=1 diff --git a/Documentation/networking/vortex.txt b/Documentation/networking/vortex.txt index bd70976b8160..b4038ffb3bc5 100644 --- a/Documentation/networking/vortex.txt +++ b/Documentation/networking/vortex.txt @@ -67,8 +67,8 @@ Module parameters ================= There are several parameters which may be provided to the driver when -its module is loaded. These are usually placed in /etc/modprobe.conf -(/etc/modules.conf in 2.4). Example: +its module is loaded. These are usually placed in /etc/modprobe.d/*.conf +configuretion files. Example: options 3c59x debug=3 rx_copybreak=300 @@ -425,7 +425,7 @@ steps you should take: 1) Increase the debug level. Usually this is done via: a) modprobe driver debug=7 - b) In /etc/modprobe.conf (or /etc/modules.conf for 2.4): + b) In /etc/modprobe.d/driver.conf: options driver debug=7 2) Recreate the problem with the higher debug level, diff --git a/Documentation/parport.txt b/Documentation/parport.txt index 93a7ceef398d..c208e4366c03 100644 --- a/Documentation/parport.txt +++ b/Documentation/parport.txt @@ -36,18 +36,17 @@ addresses should not be specified for supported PCI cards since they are automatically detected. -KMod ----- +modprobe +-------- -If you use kmod, you will find it useful to edit /etc/modprobe.conf. -Here is an example of the lines that need to be added: +If you use modprobe , you will find it useful to add lines as below to a +configuration file in /etc/modprobe.d/ directory:. alias parport_lowlevel parport_pc options parport_pc io=0x378,0x278 irq=7,auto -KMod will then automatically load parport_pc (with the options -"io=0x378,0x278 irq=7,auto") whenever a parallel port device driver -(such as lp) is loaded. +modprobe will load parport_pc (with the options "io=0x378,0x278 irq=7,auto") +whenever a parallel port device driver (such as lp) is loaded. Note that these are example lines only! You shouldn't in general need to specify any options to parport_pc in order to be able to use a diff --git a/Documentation/s390/3270.txt b/Documentation/s390/3270.txt index 7a5c73a7ed7f..7c715de99774 100644 --- a/Documentation/s390/3270.txt +++ b/Documentation/s390/3270.txt @@ -47,9 +47,9 @@ including the console 3270, changes subchannel identifier relative to one another. ReIPL as soon as possible after running the configuration script and the resulting /tmp/mkdev3270. -If you have chosen to make tub3270 a module, you add a line to -/etc/modprobe.conf. If you are working on a VM virtual machine, you -can use DEF GRAF to define virtual 3270 devices. +If you have chosen to make tub3270 a module, you add a line to a +configuration file under /etc/modprobe.d/. If you are working on a VM +virtual machine, you can use DEF GRAF to define virtual 3270 devices. You may generate both 3270 and 3215 console support, or one or the other, or neither. If you generate both, the console type under VM is @@ -60,7 +60,7 @@ at boot time to a 3270 if it is a 3215. In brief, these are the steps: 1. Install the tub3270 patch - 2. (If a module) add a line to /etc/modprobe.conf + 2. (If a module) add a line to a file in /etc/modprobe.d/*.conf 3. (If VM) define devices with DEF GRAF 4. Reboot 5. Configure @@ -84,13 +84,12 @@ Here are the installation steps in detail: make modules_install 2. (Perform this step only if you have configured tub3270 as a - module.) Add a line to /etc/modprobe.conf to automatically - load the driver when it's needed. With this line added, - you will see login prompts appear on your 3270s as soon as - boot is complete (or with emulated 3270s, as soon as you dial - into your vm guest using the command "DIAL "). - Since the line-mode major number is 227, the line to add to - /etc/modprobe.conf should be: + module.) Add a line to a file /etc/modprobe.d/*.conf to automatically + load the driver when it's needed. With this line added, you will see + login prompts appear on your 3270s as soon as boot is complete (or + with emulated 3270s, as soon as you dial into your vm guest using the + command "DIAL "). Since the line-mode major number is + 227, the line to add should be: alias char-major-227 tub3270 3. Define graphic devices to your vm guest machine, if you diff --git a/Documentation/scsi/aic79xx.txt b/Documentation/scsi/aic79xx.txt index 64ac7093c872..e2d3273000d4 100644 --- a/Documentation/scsi/aic79xx.txt +++ b/Documentation/scsi/aic79xx.txt @@ -215,7 +215,7 @@ The following information is available in this file: INCORRECTLY CAN RENDER YOUR SYSTEM INOPERABLE. USE THEM WITH CAUTION. - Edit the file "modprobe.conf" in the directory /etc and add/edit a + Put a .conf file in the /etc/modprobe.d/ directory and add/edit a line containing 'options aic79xx aic79xx=[command[,command...]]' where 'command' is one or more of the following: ----------------------------------------------------------------- diff --git a/Documentation/scsi/aic7xxx.txt b/Documentation/scsi/aic7xxx.txt index 18f8d1905e6a..7c5d0223d444 100644 --- a/Documentation/scsi/aic7xxx.txt +++ b/Documentation/scsi/aic7xxx.txt @@ -190,7 +190,7 @@ The following information is available in this file: INCORRECTLY CAN RENDER YOUR SYSTEM INOPERABLE. USE THEM WITH CAUTION. - Edit the file "modprobe.conf" in the directory /etc and add/edit a + Put a .conf file in the /etc/modprobe.d directory and add/edit a line containing 'options aic7xxx aic7xxx=[command[,command...]]' where 'command' is one or more of the following: ----------------------------------------------------------------- diff --git a/Documentation/scsi/osst.txt b/Documentation/scsi/osst.txt index ad86c6d1e898..00c8ebb2fd18 100644 --- a/Documentation/scsi/osst.txt +++ b/Documentation/scsi/osst.txt @@ -66,7 +66,7 @@ recognized. If you want to have the module autoloaded on access to /dev/osst, you may add something like alias char-major-206 osst -to your /etc/modprobe.conf (before 2.6: modules.conf). +to a file under /etc/modprobe.d/ directory. You may find it convenient to create a symbolic link ln -s nosst0 /dev/tape diff --git a/Documentation/serial/computone.txt b/Documentation/serial/computone.txt index 39ddcdbeeb85..a6a1158ea2ba 100644 --- a/Documentation/serial/computone.txt +++ b/Documentation/serial/computone.txt @@ -49,7 +49,7 @@ Hardware - If you have an ISA card, find a free interrupt and io port. Note the hardware address from the Computone ISA cards installed into the system. These are required for editing ip2.c or editing - /etc/modprobe.conf, or for specification on the modprobe + /etc/modprobe.d/*.conf, or for specification on the modprobe command line. Note that the /etc/modules.conf should be used for older (pre-2.6) @@ -66,7 +66,7 @@ b) Run "make config" or "make menuconfig" or "make xconfig" c) Set address on ISA cards then: edit /usr/src/linux/drivers/char/ip2.c if needed or - edit /etc/modprobe.conf if needed (module). + edit config file in /etc/modprobe.d/ if needed (module). or both to match this setting. d) Run "make modules" e) Run "make modules_install" @@ -153,11 +153,11 @@ the irqs are not specified the driver uses the default in ip2.c (which selects polled mode). If no base addresses are specified the defaults in ip2.c are used. If you are autoloading the driver module with kerneld or kmod the base addresses and interrupt number must also be set in ip2.c -and recompile or just insert and options line in /etc/modprobe.conf or both. +and recompile or just insert and options line in /etc/modprobe.d/*.conf or both. The options line is equivalent to the command line and takes precedence over what is in ip2.c. -/etc/modprobe.conf sample: +config sample to put /etc/modprobe.d/*.conf: options ip2 io=1,0x328 irq=1,10 alias char-major-71 ip2 alias char-major-72 ip2 diff --git a/Documentation/serial/rocket.txt b/Documentation/serial/rocket.txt index 1d8582990435..60b039891057 100644 --- a/Documentation/serial/rocket.txt +++ b/Documentation/serial/rocket.txt @@ -62,7 +62,7 @@ in the system log at /var/log/messages. If installed as a module, the module must be loaded. This can be done manually by entering "modprobe rocket". To have the module loaded automatically -upon system boot, edit the /etc/modprobe.conf file and add the line +upon system boot, edit a /etc/modprobe.d/*.conf file and add the line "alias char-major-46 rocket". In order to use the ports, their device names (nodes) must be created with mknod. diff --git a/Documentation/serial/stallion.txt b/Documentation/serial/stallion.txt index 5c4902d9a5be..55090914a9c5 100644 --- a/Documentation/serial/stallion.txt +++ b/Documentation/serial/stallion.txt @@ -139,8 +139,8 @@ secondary address 0x280 and IRQ 10. You will probably want to enter this module load and configuration information into your system startup scripts so that the drivers are loaded and configured -on each system boot. Typically the start up script would be something like -/etc/modprobe.conf. +on each system boot. Typically configuration files are put in the +/etc/modprobe.d/ directory. 2.2 STATIC DRIVER CONFIGURATION: diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index 6f75ba3b8a39..8c16d50f6cb6 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -2044,7 +2044,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. Install the necessary firmware files in alsa-firmware package. When no hotplug fw loader is available, you need to load the firmware via vxloader utility in alsa-tools package. To invoke - vxloader automatically, add the following to /etc/modprobe.conf + vxloader automatically, add the following to /etc/modprobe.d/alsa.conf install snd-vx222 /sbin/modprobe --first-time -i snd-vx222 && /usr/bin/vxloader @@ -2168,10 +2168,10 @@ corresponds to the card index of ALSA. Usually, define this as the same card module. An example configuration for a single emu10k1 card is like below: ------ /etc/modprobe.conf +----- /etc/modprobe.d/alsa.conf alias snd-card-0 snd-emu10k1 alias sound-slot-0 snd-emu10k1 ------ /etc/modprobe.conf +----- /etc/modprobe.d/alsa.conf The available number of auto-loaded sound cards depends on the module option "cards_limit" of snd module. As default it's set to 1. @@ -2184,7 +2184,7 @@ cards is kept consistent. An example configuration for two sound cards is like below: ------ /etc/modprobe.conf +----- /etc/modprobe.d/alsa.conf # ALSA portion options snd cards_limit=2 alias snd-card-0 snd-interwave @@ -2194,7 +2194,7 @@ options snd-ens1371 index=1 # OSS/Free portion alias sound-slot-0 snd-interwave alias sound-slot-1 snd-ens1371 ------ /etc/modprobe.conf +----- /etc/modprobe.d/alsa.conf In this example, the interwave card is always loaded as the first card (index 0) and ens1371 as the second (index 1). diff --git a/Documentation/sound/alsa/Audiophile-Usb.txt b/Documentation/sound/alsa/Audiophile-Usb.txt index a4c53d8961e1..654dd3b694a8 100644 --- a/Documentation/sound/alsa/Audiophile-Usb.txt +++ b/Documentation/sound/alsa/Audiophile-Usb.txt @@ -232,7 +232,7 @@ The parameter can be given: # modprobe snd-usb-audio index=1 device_setup=0x09 * Or while configuring the modules options in your modules configuration file - - For Fedora distributions, edit the /etc/modprobe.conf file: + (tipically a .conf file in /etc/modprobe.d/ directory: alias snd-card-1 snd-usb-audio options snd-usb-audio index=1 device_setup=0x09 @@ -253,7 +253,7 @@ CAUTION when initializing the device - first turn off the device - de-register the snd-usb-audio module (modprobe -r) - change the device_setup parameter by changing the device_setup - option in /etc/modprobe.conf + option in /etc/modprobe.d/*.conf - turn on the device * A workaround for this last issue has been applied to kernel 2.6.23, but it may not be enough to ensure the 'stability' of the device initialization. diff --git a/Documentation/sound/alsa/MIXART.txt b/Documentation/sound/alsa/MIXART.txt index ef42c44fa1f2..4ee35b4fbe4a 100644 --- a/Documentation/sound/alsa/MIXART.txt +++ b/Documentation/sound/alsa/MIXART.txt @@ -76,9 +76,9 @@ FIRMWARE when CONFIG_FW_LOADER is set. The mixartloader is necessary only for older versions or when you build the driver into kernel.] -For loading the firmware automatically after the module is loaded, use -the post-install command. For example, add the following entry to -/etc/modprobe.conf for miXart driver: +For loading the firmware automatically after the module is loaded, use a +install command. For example, add the following entry to +/etc/modprobe.d/mixart.conf for miXart driver: install snd-mixart /sbin/modprobe --first-time -i snd-mixart && \ /usr/bin/mixartloader diff --git a/Documentation/sound/alsa/OSS-Emulation.txt b/Documentation/sound/alsa/OSS-Emulation.txt index 022aaeb0e9dd..152ca2a3f1bd 100644 --- a/Documentation/sound/alsa/OSS-Emulation.txt +++ b/Documentation/sound/alsa/OSS-Emulation.txt @@ -19,7 +19,7 @@ the card number and the minor unit number. Usually you don't have to define these aliases by yourself. Only necessary step for auto-loading of OSS modules is to define the -card alias in /etc/modprobe.conf, such as +card alias in /etc/modprobe.d/alsa.conf, such as alias sound-slot-0 snd-emu10k1 diff --git a/Documentation/sound/oss/AudioExcelDSP16 b/Documentation/sound/oss/AudioExcelDSP16 index e0dc0641b480..e863f9cd5941 100644 --- a/Documentation/sound/oss/AudioExcelDSP16 +++ b/Documentation/sound/oss/AudioExcelDSP16 @@ -41,7 +41,7 @@ mpu_base I/O base address for activate MPU-401 mode (0x300, 0x310, 0x320 or 0x330) mpu_irq MPU-401 irq line (5, 7, 9, 10 or 0) -The /etc/modprobe.conf will have lines like this: +A configuration file in /etc/modprobe.d/ directory will have lines like this: options opl3 io=0x388 options ad1848 io=0x530 irq=11 dma=3 @@ -51,8 +51,8 @@ Where the aedsp16 options are the options for this driver while opl3 and ad1848 are the corresponding options for the MSS and OPL3 modules. Loading MSS and OPL3 needs to pre load the aedsp16 module to set up correctly -the sound card. Installation dependencies must be written in the modprobe.conf -file: +the sound card. Installation dependencies must be written in configuration +files under /etc/modprobe.d/ directory: install ad1848 /sbin/modprobe aedsp16 && /sbin/modprobe -i ad1848 install opl3 /sbin/modprobe aedsp16 && /sbin/modprobe -i opl3 diff --git a/Documentation/sound/oss/CMI8330 b/Documentation/sound/oss/CMI8330 index 9c439f1a6dba..8a5fd1611c6f 100644 --- a/Documentation/sound/oss/CMI8330 +++ b/Documentation/sound/oss/CMI8330 @@ -143,11 +143,10 @@ CONFIG_SOUND_MSS=m -Alma Chao suggests the following /etc/modprobe.conf: +Alma Chao suggests the following in +a /etc/modprobe.d/*conf file: alias sound ad1848 alias synth0 opl3 options ad1848 io=0x530 irq=7 dma=0 soundpro=1 options opl3 io=0x388 - - diff --git a/Documentation/sound/oss/Introduction b/Documentation/sound/oss/Introduction index 75d967ff9266..42da2d8fa372 100644 --- a/Documentation/sound/oss/Introduction +++ b/Documentation/sound/oss/Introduction @@ -167,8 +167,8 @@ in a file such as /root/soundon.sh. MODPROBE: ========= -If loading via modprobe, these common files are automatically loaded -when requested by modprobe. For example, my /etc/modprobe.conf contains: +If loading via modprobe, these common files are automatically loaded when +requested by modprobe. For example, my /etc/modprobe.d/oss.conf contains: alias sound sb options sb io=0x240 irq=9 dma=3 dma16=5 mpu_io=0x300 @@ -228,7 +228,7 @@ http://www.opensound.com. Before loading the commercial sound driver, you should do the following: 1. remove sound modules (detailed above) -2. remove the sound modules from /etc/modprobe.conf +2. remove the sound modules from /etc/modprobe.d/*.conf 3. move the sound modules from /lib/modules//misc (for example, I make a /lib/modules//misc/tmp directory and copy the sound module files to that @@ -265,7 +265,7 @@ twice, you need to do the following: sb.o could be copied (or symlinked) to sb1.o for the second SoundBlaster. -2. Make a second entry in /etc/modprobe.conf, for example, +2. Make a second entry in /etc/modprobe.d/*conf, for example, sound1 or sb1. This second entry should refer to the new module names for example sb1, and should include the I/O, etc. for the second sound card. @@ -369,7 +369,7 @@ There are several ways of configuring your sound: 2) On the command line when using insmod or in a bash script using command line calls to load sound. -3) In /etc/modprobe.conf when using modprobe. +3) In /etc/modprobe.d/*conf when using modprobe. 4) Via Red Hat's GPL'd /usr/sbin/sndconfig program (text based). diff --git a/Documentation/sound/oss/Opti b/Documentation/sound/oss/Opti index c15af3c07d46..4cd5d9ab3580 100644 --- a/Documentation/sound/oss/Opti +++ b/Documentation/sound/oss/Opti @@ -18,7 +18,7 @@ force the card into a mode in which it can be programmed. If you have another OS installed on your computer it is recommended that Linux and the other OS use the same resources. -Also, it is recommended that resources specified in /etc/modprobe.conf +Also, it is recommended that resources specified in /etc/modprobe.d/*.conf and resources specified in /etc/isapnp.conf agree. Compiling the sound driver @@ -67,11 +67,7 @@ address is hard-coded into the driver. Using kmod and autoloading the sound driver ------------------------------------------- -Comment: as of linux-2.1.90 kmod is replacing kerneld. -The config file '/etc/modprobe.conf' is used as before. - -This is the sound part of my /etc/modprobe.conf file. -Following that I will explain each line. +Config files in '/etc/modprobe.d/' are used as below: alias mixer0 mad16 alias audio0 mad16 diff --git a/Documentation/sound/oss/PAS16 b/Documentation/sound/oss/PAS16 index 3dca4b75988e..5c27229eec8c 100644 --- a/Documentation/sound/oss/PAS16 +++ b/Documentation/sound/oss/PAS16 @@ -128,7 +128,7 @@ CONFIG_SOUND_YM3812 You can then get OPL3 functionality by issuing the command: insmod opl3 In addition, you must either add the following line to - /etc/modprobe.conf: + /etc/modprobe.d/*.conf: options opl3 io=0x388 or else add the following line to /etc/lilo.conf: opl3=0x388 @@ -158,5 +158,5 @@ following line would be appropriate: append="pas2=0x388,10,3,-1,0,-1,-1,-1 opl3=0x388" If sound is built totally modular, the above options may be -specified in /etc/modprobe.conf for pas2, sb and opl3 +specified in /etc/modprobe.d/*.conf for pas2, sb and opl3 respectively. diff --git a/Documentation/sound/oss/README.modules b/Documentation/sound/oss/README.modules index e691d74e1e5e..bf5142a7be79 100644 --- a/Documentation/sound/oss/README.modules +++ b/Documentation/sound/oss/README.modules @@ -26,7 +26,7 @@ Note that it is no longer necessary or possible to configure sound in the drivers/sound dir. Now one simply configures and makes one's kernel and modules in the usual way. - Then, add to your /etc/modprobe.conf something like: + Then, add to your /etc/modprobe.d/oss.conf something like: alias char-major-14-* sb install sb /sbin/modprobe -i sb && /sbin/modprobe adlib_card @@ -66,12 +66,12 @@ args are expected. Note that at present there is no way to configure the io, irq and other parameters for the modular drivers as one does for the wired drivers.. One needs to pass the modules the necessary parameters as arguments, either -with /etc/modprobe.conf or with command-line args to modprobe, e.g. +with /etc/modprobe.d/*.conf or with command-line args to modprobe, e.g. modprobe sb io=0x220 irq=7 dma=1 dma16=5 mpu_io=0x330 modprobe adlib_card io=0x388 - recommend using /etc/modprobe.conf. + recommend using /etc/modprobe.d/*.conf. Persistent DMA Buffers: @@ -89,7 +89,7 @@ wasteful of RAM, but it guarantees that sound always works. To make the sound driver use persistent DMA buffers we need to pass the sound.o module a "dmabuf=1" command-line argument. This is normally done -in /etc/modprobe.conf like so: +in /etc/modprobe.d/*.conf files like so: options sound dmabuf=1 diff --git a/Documentation/usb/power-management.txt b/Documentation/usb/power-management.txt index 817df299ea07..4204eb01fd38 100644 --- a/Documentation/usb/power-management.txt +++ b/Documentation/usb/power-management.txt @@ -179,7 +179,8 @@ do: modprobe usbcore autosuspend=5 -Equivalently, you could add to /etc/modprobe.conf a line saying: +Equivalently, you could add to a configuration file in /etc/modprobe.d +a line saying: options usbcore autosuspend=5 diff --git a/Documentation/video4linux/CQcam.txt b/Documentation/video4linux/CQcam.txt index 8977e7ce4dab..6e680fec1e9c 100644 --- a/Documentation/video4linux/CQcam.txt +++ b/Documentation/video4linux/CQcam.txt @@ -61,29 +61,19 @@ But that is my personal preference. 2.2 Configuration The configuration requires module configuration and device -configuration. I like kmod or kerneld process with the -/etc/modprobe.conf file so the modules can automatically load/unload as -they are used. The video devices could already exist, be generated -using MAKEDEV, or need to be created. The following sections detail -these procedures. +configuration. The following sections detail these procedures. 2.1 Module Configuration Using modules requires a bit of work to install and pass the -parameters. Understand that entries in /etc/modprobe.conf of: +parameters. Understand that entries in /etc/modprobe.d/*.conf of: alias parport_lowlevel parport_pc options parport_pc io=0x378 irq=none alias char-major-81 videodev alias char-major-81-0 c-qcam -will cause the kmod/modprobe to do certain things. If you are -using kmod, then a request for a 'char-major-81-0' will cause -the 'c-qcam' module to load. If you have other video sources with -modules, you might want to assign the different minor numbers to -different modules. - 2.2 Device Configuration At this point, we need to ensure that the device files exist. diff --git a/Documentation/video4linux/Zoran b/Documentation/video4linux/Zoran index 9ed629d4874b..b5a911fd0602 100644 --- a/Documentation/video4linux/Zoran +++ b/Documentation/video4linux/Zoran @@ -255,7 +255,7 @@ Load zr36067.o. If it can't autodetect your card, use the card=X insmod option with X being the card number as given in the previous section. To have more than one card, use card=X1[,X2[,X3,[X4[..]]]] -To automate this, add the following to your /etc/modprobe.conf: +To automate this, add the following to your /etc/modprobe.d/zoran.conf: options zr36067 card=X1[,X2[,X3[,X4[..]]]] alias char-major-81-0 zr36067 diff --git a/Documentation/video4linux/bttv/Modules.conf b/Documentation/video4linux/bttv/Modules.conf index 753f15956eb8..8f258faf18f1 100644 --- a/Documentation/video4linux/bttv/Modules.conf +++ b/Documentation/video4linux/bttv/Modules.conf @@ -1,4 +1,4 @@ -# For modern kernels (2.6 or above), this belongs in /etc/modprobe.conf +# For modern kernels (2.6 or above), this belongs in /etc/modprobe.d/*.conf # For for 2.4 kernels or earlier, this belongs in /etc/modules.conf. # i2c diff --git a/Documentation/video4linux/meye.txt b/Documentation/video4linux/meye.txt index 34e2842c70ae..a051152ea99c 100644 --- a/Documentation/video4linux/meye.txt +++ b/Documentation/video4linux/meye.txt @@ -55,7 +55,7 @@ Module use: ----------- In order to automatically load the meye module on use, you can put those lines -in your /etc/modprobe.conf file: +in your /etc/modprobe.d/meye.conf file: alias char-major-81 videodev alias char-major-81-0 meye diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig index 423eb26386c8..d70ede7a7f96 100644 --- a/drivers/net/wan/Kconfig +++ b/drivers/net/wan/Kconfig @@ -290,8 +290,8 @@ config FARSYNC Frame Relay or X.25/LAPB. If you want the module to be automatically loaded when the interface - is referenced then you should add "alias hdlcX farsync" to - /etc/modprobe.conf for each interface, where X is 0, 1, 2, ..., or + is referenced then you should add "alias hdlcX farsync" to a file + in /etc/modprobe.d/ for each interface, where X is 0, 1, 2, ..., or simply use "alias hdlc* farsync" to indicate all of them. To compile this driver as a module, choose M here: the diff --git a/drivers/scsi/aic7xxx/aic79xx_osm.c b/drivers/scsi/aic7xxx/aic79xx_osm.c index 7d48700257a7..9328121804bb 100644 --- a/drivers/scsi/aic7xxx/aic79xx_osm.c +++ b/drivers/scsi/aic7xxx/aic79xx_osm.c @@ -341,10 +341,10 @@ MODULE_PARM_DESC(aic79xx, " (0/256ms,1/128ms,2/64ms,3/32ms)\n" " slowcrc Turn on the SLOWCRC bit (Rev B only)\n" "\n" -" Sample /etc/modprobe.conf line:\n" -" Enable verbose logging\n" -" Set tag depth on Controller 2/Target 2 to 10 tags\n" -" Shorten the selection timeout to 128ms\n" +" Sample modprobe configuration file:\n" +" # Enable verbose logging\n" +" # Set tag depth on Controller 2/Target 2 to 10 tags\n" +" # Shorten the selection timeout to 128ms\n" "\n" " options aic79xx 'aic79xx=verbose.tag_info:{{}.{}.{..10}}.seltime:1'\n" ); diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm.c b/drivers/scsi/aic7xxx/aic7xxx_osm.c index c6251bb4f438..5a477cdc780d 100644 --- a/drivers/scsi/aic7xxx/aic7xxx_osm.c +++ b/drivers/scsi/aic7xxx/aic7xxx_osm.c @@ -360,10 +360,10 @@ MODULE_PARM_DESC(aic7xxx, " seltime: Selection Timeout\n" " (0/256ms,1/128ms,2/64ms,3/32ms)\n" "\n" -" Sample /etc/modprobe.conf line:\n" -" Toggle EISA/VLB probing\n" -" Set tag depth on Controller 1/Target 1 to 10 tags\n" -" Shorten the selection timeout to 128ms\n" +" Sample modprobe configuration file:\n" +" # Toggle EISA/VLB probing\n" +" # Set tag depth on Controller 1/Target 1 to 10 tags\n" +" # Shorten the selection timeout to 128ms\n" "\n" " options aic7xxx 'aic7xxx=probe_eisa_vl.tag_info:{{}.{.10}}.seltime:1'\n" ); diff --git a/drivers/staging/asus_oled/README b/drivers/staging/asus_oled/README index 0d82a6d5fa58..2d721232467a 100644 --- a/drivers/staging/asus_oled/README +++ b/drivers/staging/asus_oled/README @@ -52,7 +52,7 @@ Configuration There is only one option: start_off. You can use it by: 'modprobe asus_oled start_off=1', or by adding this - line to /etc/modprobe.conf: + line to /etc/modprobe.d/asus_oled.conf: options asus_oled start_off=1 With this option provided, asus_oled driver will switch off the display diff --git a/drivers/tty/isicom.c b/drivers/tty/isicom.c index 794ecb40017c..e1235accab74 100644 --- a/drivers/tty/isicom.c +++ b/drivers/tty/isicom.c @@ -102,7 +102,7 @@ * You can find the original tools for this direct from Multitech * ftp://ftp.multitech.com/ISI-Cards/ * - * Having installed the cards the module options (/etc/modprobe.conf) + * Having installed the cards the module options (/etc/modprobe.d/) * * options isicom io=card1,card2,card3,card4 irq=card1,card2,card3,card4 * diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 7c229d304684..ff8605b4b4be 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1724,7 +1724,8 @@ static void ftdi_HE_TIRA1_setup(struct ftdi_private *priv) /* * Module parameter to control latency timer for NDI FTDI-based USB devices. - * If this value is not set in modprobe.conf.local its value will be set to 1ms. + * If this value is not set in /etc/modprobe.d/ its value will be set + * to 1ms. */ static int ndi_latency_timer = 1; diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig index fe2d803a6347..7691c866637b 100644 --- a/drivers/usb/storage/Kconfig +++ b/drivers/usb/storage/Kconfig @@ -222,7 +222,7 @@ config USB_LIBUSUAL for usb-storage and ub drivers, and allows to switch binding of these devices without rebuilding modules. - Typical syntax of /etc/modprobe.conf is: + Typical syntax of /etc/modprobe.d/*conf is: options libusual bias="ub" diff --git a/sound/core/seq/seq_dummy.c b/sound/core/seq/seq_dummy.c index bbe32d2177d9..dbc550716790 100644 --- a/sound/core/seq/seq_dummy.c +++ b/sound/core/seq/seq_dummy.c @@ -46,7 +46,7 @@ The number of ports to be created can be specified via the module parameter "ports". For example, to create four ports, add the - following option in /etc/modprobe.conf: + following option in a configuration file under /etc/modprobe.d/: option snd-seq-dummy ports=4 diff --git a/sound/drivers/Kconfig b/sound/drivers/Kconfig index c8961165277c..fe5ae09ffccb 100644 --- a/sound/drivers/Kconfig +++ b/sound/drivers/Kconfig @@ -50,7 +50,8 @@ config SND_PCSP before the other sound driver of yours, making the pc-speaker a default sound device. Which is likely not what you want. To make this driver play nicely with other - sound driver, you can add this into your /etc/modprobe.conf: + sound driver, you can add this in a configuration file under + /etc/modprobe.d/ directory: options snd-pcsp index=2 You don't need this driver if you only want your pc-speaker to beep. -- cgit v1.2.3