From 464ec10a2d7f09784517040fae8de54a39c2765f Mon Sep 17 00:00:00 2001 From: hayeswang Date: Thu, 12 Feb 2015 14:33:46 +0800 Subject: r8152: separate USB_RX_EARLY_AGG Separate USB_RX_EARLY_AGG into USB_RX_EARLY_TIMEOUT and USB_RX_EARLY_SIZE. Replace r8153_set_rx_agg() with r8153_set_rx_early_timeout() and r8153_set_rx_early_size(). Set the default timeout value according to the USB speed. Signed-off-by: Hayes Wang Signed-off-by: David S. Miller --- drivers/net/usb/r8152.c | 58 +++++++++++++++++++++++++++---------------------- 1 file changed, 32 insertions(+), 26 deletions(-) diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index 438fc6bcaef1..8a8d3a3b18bd 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -104,7 +104,8 @@ #define USB_TX_AGG 0xd40a #define USB_RX_BUF_TH 0xd40c #define USB_USB_TIMER 0xd428 -#define USB_RX_EARLY_AGG 0xd42c +#define USB_RX_EARLY_TIMEOUT 0xd42c +#define USB_RX_EARLY_SIZE 0xd42e #define USB_PM_CTRL_STATUS 0xd432 #define USB_TX_DMA 0xd434 #define USB_TOLERANCE 0xd490 @@ -349,10 +350,10 @@ /* USB_MISC_0 */ #define PCUT_STATUS 0x0001 -/* USB_RX_EARLY_AGG */ -#define EARLY_AGG_SUPPER 0x0e832981 -#define EARLY_AGG_HIGH 0x0e837a12 -#define EARLY_AGG_SLOW 0x0e83ffff +/* USB_RX_EARLY_TIMEOUT */ +#define COALESCE_SUPER 85000U +#define COALESCE_HIGH 250000U +#define COALESCE_SLOW 524280U /* USB_WDT11_CTRL */ #define TIMER11_EN 0x0001 @@ -606,6 +607,7 @@ struct r8152 { u32 saved_wolopts; u32 msg_enable; u32 tx_qlen; + u32 coalesce; u16 ocp_base; u8 *intr_buff; u8 version; @@ -2142,28 +2144,19 @@ static int rtl8152_enable(struct r8152 *tp) return rtl_enable(tp); } -static void r8153_set_rx_agg(struct r8152 *tp) +static void r8153_set_rx_early_timeout(struct r8152 *tp) { - u8 speed; + u32 ocp_data = tp->coalesce / 8; - speed = rtl8152_get_speed(tp); - if (speed & _1000bps) { - if (tp->udev->speed == USB_SPEED_SUPER) { - ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH, - RX_THR_SUPPER); - ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_EARLY_AGG, - EARLY_AGG_SUPPER); - } else { - ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH, - RX_THR_HIGH); - ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_EARLY_AGG, - EARLY_AGG_HIGH); - } - } else { - ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH, RX_THR_SLOW); - ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_EARLY_AGG, - EARLY_AGG_SLOW); - } + ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EARLY_TIMEOUT, ocp_data); +} + +static void r8153_set_rx_early_size(struct r8152 *tp) +{ + u32 mtu = tp->netdev->mtu; + u32 ocp_data = (agg_buf_sz - mtu - VLAN_ETH_HLEN - VLAN_HLEN) / 4; + + ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EARLY_SIZE, ocp_data); } static int rtl8153_enable(struct r8152 *tp) @@ -2173,7 +2166,8 @@ static int rtl8153_enable(struct r8152 *tp) set_tx_qlen(tp); rtl_set_eee_plus(tp); - r8153_set_rx_agg(tp); + r8153_set_rx_early_timeout(tp); + r8153_set_rx_early_size(tp); return rtl_enable(tp); } @@ -3966,6 +3960,18 @@ static int rtl8152_probe(struct usb_interface *intf, tp->mii.reg_num_mask = 0x1f; tp->mii.phy_id = R8152_PHY_ID; + switch (udev->speed) { + case USB_SPEED_SUPER: + tp->coalesce = COALESCE_SUPER; + break; + case USB_SPEED_HIGH: + tp->coalesce = COALESCE_HIGH; + break; + default: + tp->coalesce = COALESCE_SLOW; + break; + } + intf->needs_remote_wakeup = 1; tp->rtl_ops.init(tp); -- cgit v1.2.3 From 396e2e235af79b39d605ad6259f366e502e21959 Mon Sep 17 00:00:00 2001 From: hayeswang Date: Thu, 12 Feb 2015 14:33:47 +0800 Subject: r8152: change rx early size when the mtu is changed The rx early size is calculated with the mtu, so it has to be re-calculated when the mtu is changed. Signed-off-by: Hayes Wang Signed-off-by: David S. Miller --- drivers/net/usb/r8152.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index 8a8d3a3b18bd..5a3a689b3a60 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -3777,6 +3777,7 @@ out: static int rtl8152_change_mtu(struct net_device *dev, int new_mtu) { struct r8152 *tp = netdev_priv(dev); + int ret; switch (tp->version) { case RTL_VER_01: @@ -3789,9 +3790,22 @@ static int rtl8152_change_mtu(struct net_device *dev, int new_mtu) if (new_mtu < 68 || new_mtu > RTL8153_MAX_MTU) return -EINVAL; + ret = usb_autopm_get_interface(tp->intf); + if (ret < 0) + return ret; + + mutex_lock(&tp->control); + dev->mtu = new_mtu; - return 0; + if (netif_running(dev) && netif_carrier_ok(dev)) + r8153_set_rx_early_size(tp); + + mutex_unlock(&tp->control); + + usb_autopm_put_interface(tp->intf); + + return ret; } static const struct net_device_ops rtl8152_netdev_ops = { -- cgit v1.2.3 From efb3dd88f4490b752e3c26bbc3e40391758426d6 Mon Sep 17 00:00:00 2001 From: hayeswang Date: Thu, 12 Feb 2015 14:33:48 +0800 Subject: r8152: support setting rx coalesce Support setting the rx coalesce. Then someone could change the rx agg timeout value through ethtool. Signed-off-by: Hayes Wang Signed-off-by: David S. Miller --- drivers/net/usb/r8152.c | 57 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 57 insertions(+) diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index 5a3a689b3a60..5065538dd03b 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -3713,6 +3713,61 @@ out: return ret; } +static int rtl8152_get_coalesce(struct net_device *netdev, + struct ethtool_coalesce *coalesce) +{ + struct r8152 *tp = netdev_priv(netdev); + + switch (tp->version) { + case RTL_VER_01: + case RTL_VER_02: + return -EOPNOTSUPP; + default: + break; + } + + coalesce->rx_coalesce_usecs = tp->coalesce; + + return 0; +} + +static int rtl8152_set_coalesce(struct net_device *netdev, + struct ethtool_coalesce *coalesce) +{ + struct r8152 *tp = netdev_priv(netdev); + int ret; + + switch (tp->version) { + case RTL_VER_01: + case RTL_VER_02: + return -EOPNOTSUPP; + default: + break; + } + + if (coalesce->rx_coalesce_usecs > COALESCE_SLOW) + return -EINVAL; + + ret = usb_autopm_get_interface(tp->intf); + if (ret < 0) + return ret; + + mutex_lock(&tp->control); + + if (tp->coalesce != coalesce->rx_coalesce_usecs) { + tp->coalesce = coalesce->rx_coalesce_usecs; + + if (netif_running(tp->netdev) && netif_carrier_ok(netdev)) + r8153_set_rx_early_timeout(tp); + } + + mutex_unlock(&tp->control); + + usb_autopm_put_interface(tp->intf); + + return ret; +} + static struct ethtool_ops ops = { .get_drvinfo = rtl8152_get_drvinfo, .get_settings = rtl8152_get_settings, @@ -3726,6 +3781,8 @@ static struct ethtool_ops ops = { .get_strings = rtl8152_get_strings, .get_sset_count = rtl8152_get_sset_count, .get_ethtool_stats = rtl8152_get_ethtool_stats, + .get_coalesce = rtl8152_get_coalesce, + .set_coalesce = rtl8152_set_coalesce, .get_eee = rtl_ethtool_get_eee, .set_eee = rtl_ethtool_set_eee, }; -- cgit v1.2.3