From eaebdedc61ac7bc3dd6ef6eb508097c4aaabef0c Mon Sep 17 00:00:00 2001 From: Fabian Frederick Date: Wed, 2 Jul 2014 22:08:46 +0200 Subject: GFS2: fs/gfs2/super.c: replace seq_printf by seq_puts fix checkpatch warnings: "WARNING: Prefer seq_puts to seq_printf" Cc: cluster-devel@redhat.com Signed-off-by: Fabian Frederick Signed-off-by: Steven Whitehouse --- fs/gfs2/super.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/fs/gfs2/super.c b/fs/gfs2/super.c index 2607ff13d486..a346f56c4c6d 100644 --- a/fs/gfs2/super.c +++ b/fs/gfs2/super.c @@ -1294,7 +1294,7 @@ static int gfs2_show_options(struct seq_file *s, struct dentry *root) int val; if (is_ancestor(root, sdp->sd_master_dir)) - seq_printf(s, ",meta"); + seq_puts(s, ",meta"); if (args->ar_lockproto[0]) seq_printf(s, ",lockproto=%s", args->ar_lockproto); if (args->ar_locktable[0]) @@ -1302,13 +1302,13 @@ static int gfs2_show_options(struct seq_file *s, struct dentry *root) if (args->ar_hostdata[0]) seq_printf(s, ",hostdata=%s", args->ar_hostdata); if (args->ar_spectator) - seq_printf(s, ",spectator"); + seq_puts(s, ",spectator"); if (args->ar_localflocks) - seq_printf(s, ",localflocks"); + seq_puts(s, ",localflocks"); if (args->ar_debug) - seq_printf(s, ",debug"); + seq_puts(s, ",debug"); if (args->ar_posix_acl) - seq_printf(s, ",acl"); + seq_puts(s, ",acl"); if (args->ar_quota != GFS2_QUOTA_DEFAULT) { char *state; switch (args->ar_quota) { @@ -1328,7 +1328,7 @@ static int gfs2_show_options(struct seq_file *s, struct dentry *root) seq_printf(s, ",quota=%s", state); } if (args->ar_suiddir) - seq_printf(s, ",suiddir"); + seq_puts(s, ",suiddir"); if (args->ar_data != GFS2_DATA_DEFAULT) { char *state; switch (args->ar_data) { @@ -1345,7 +1345,7 @@ static int gfs2_show_options(struct seq_file *s, struct dentry *root) seq_printf(s, ",data=%s", state); } if (args->ar_discard) - seq_printf(s, ",discard"); + seq_puts(s, ",discard"); val = sdp->sd_tune.gt_logd_secs; if (val != 30) seq_printf(s, ",commit=%d", val); @@ -1376,11 +1376,11 @@ static int gfs2_show_options(struct seq_file *s, struct dentry *root) seq_printf(s, ",errors=%s", state); } if (test_bit(SDF_NOBARRIERS, &sdp->sd_flags)) - seq_printf(s, ",nobarrier"); + seq_puts(s, ",nobarrier"); if (test_bit(SDF_DEMOTE, &sdp->sd_flags)) - seq_printf(s, ",demote_interface_used"); + seq_puts(s, ",demote_interface_used"); if (args->ar_rgrplvb) - seq_printf(s, ",rgrplvb"); + seq_puts(s, ",rgrplvb"); return 0; } -- cgit v1.2.3 From b650738cd093a9f9e9551db9ce5cd68acd842dc0 Mon Sep 17 00:00:00 2001 From: Bob Peterson Date: Wed, 6 Aug 2014 09:08:36 -0400 Subject: GFS2: Change maxlen variables to size_t This patch changes some variables (especially maxlen in function gfs2_block_map) from unsigned int to size_t. We need 64-bit arithmetic for very large files (e.g. 1PB) where the variables otherwise get shifted to all 0's. Signed-off-by: Bob Peterson Signed-off-by: Steven Whitehouse --- fs/gfs2/bmap.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/fs/gfs2/bmap.c b/fs/gfs2/bmap.c index e6ee5b6e8d99..f0b945ab853e 100644 --- a/fs/gfs2/bmap.c +++ b/fs/gfs2/bmap.c @@ -359,7 +359,7 @@ static inline void release_metapath(struct metapath *mp) * Returns: The length of the extent (minimum of one block) */ -static inline unsigned int gfs2_extent_length(void *start, unsigned int len, __be64 *ptr, unsigned limit, int *eob) +static inline unsigned int gfs2_extent_length(void *start, unsigned int len, __be64 *ptr, size_t limit, int *eob) { const __be64 *end = (start + len); const __be64 *first = ptr; @@ -449,7 +449,7 @@ static int gfs2_bmap_alloc(struct inode *inode, const sector_t lblock, struct buffer_head *bh_map, struct metapath *mp, const unsigned int sheight, const unsigned int height, - const unsigned int maxlen) + const size_t maxlen) { struct gfs2_inode *ip = GFS2_I(inode); struct gfs2_sbd *sdp = GFS2_SB(inode); @@ -483,7 +483,8 @@ static int gfs2_bmap_alloc(struct inode *inode, const sector_t lblock, } else { /* Need to allocate indirect blocks */ ptrs_per_blk = height > 1 ? sdp->sd_inptrs : sdp->sd_diptrs; - dblks = min(maxlen, ptrs_per_blk - mp->mp_list[end_of_metadata]); + dblks = min(maxlen, (size_t)(ptrs_per_blk - + mp->mp_list[end_of_metadata])); if (height == ip->i_height) { /* Writing into existing tree, extend tree down */ iblks = height - sheight; @@ -605,7 +606,7 @@ int gfs2_block_map(struct inode *inode, sector_t lblock, struct gfs2_inode *ip = GFS2_I(inode); struct gfs2_sbd *sdp = GFS2_SB(inode); unsigned int bsize = sdp->sd_sb.sb_bsize; - const unsigned int maxlen = bh_map->b_size >> inode->i_blkbits; + const size_t maxlen = bh_map->b_size >> inode->i_blkbits; const u64 *arr = sdp->sd_heightsize; __be64 *ptr; u64 size; -- cgit v1.2.3 From 2ddfbdd6848d496d8088b28992d257fd02e58c9d Mon Sep 17 00:00:00 2001 From: Bob Peterson Date: Wed, 20 Aug 2014 12:44:45 -0400 Subject: GFS2: Request demote when a "try" flock fails This patch changes the flock code so that it uses the TRY_1CB flag instead of the TRY flag on the first attempt. That forces any holding nodes to issue a dlm callback, which requests a demote of the glock. Then, if the "try" failed, it sleeps a small amount of time for the demote to occur. Then it tries again, for an increasing amount of time. Subsequent attempts to gain the "try" lock don't use "_1CB" so that only one callback is issued. Signed-off-by: Bob Peterson Signed-off-by: Steven Whitehouse --- fs/gfs2/file.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/fs/gfs2/file.c b/fs/gfs2/file.c index 26b3f952e6b1..7f4ed3daa38c 100644 --- a/fs/gfs2/file.c +++ b/fs/gfs2/file.c @@ -26,6 +26,7 @@ #include #include #include +#include #include "gfs2.h" #include "incore.h" @@ -979,9 +980,10 @@ static int do_flock(struct file *file, int cmd, struct file_lock *fl) unsigned int state; int flags; int error = 0; + int sleeptime; state = (fl->fl_type == F_WRLCK) ? LM_ST_EXCLUSIVE : LM_ST_SHARED; - flags = (IS_SETLKW(cmd) ? 0 : LM_FLAG_TRY) | GL_EXACT; + flags = (IS_SETLKW(cmd) ? 0 : LM_FLAG_TRY_1CB) | GL_EXACT; mutex_lock(&fp->f_fl_mutex); @@ -1001,7 +1003,14 @@ static int do_flock(struct file *file, int cmd, struct file_lock *fl) gfs2_holder_init(gl, state, flags, fl_gh); gfs2_glock_put(gl); } - error = gfs2_glock_nq(fl_gh); + for (sleeptime = 1; sleeptime <= 4; sleeptime <<= 1) { + error = gfs2_glock_nq(fl_gh); + if (error != GLR_TRYFAILED) + break; + fl_gh->gh_flags = LM_FLAG_TRY | GL_EXACT; + fl_gh->gh_error = 0; + msleep(sleeptime); + } if (error) { gfs2_holder_uninit(fl_gh); if (error == GLR_TRYFAILED) @@ -1024,7 +1033,7 @@ static void do_unflock(struct file *file, struct file_lock *fl) mutex_lock(&fp->f_fl_mutex); flock_lock_file_wait(file, fl); if (fl_gh->gh_gl) { - gfs2_glock_dq_wait(fl_gh); + gfs2_glock_dq(fl_gh); gfs2_holder_uninit(fl_gh); } mutex_unlock(&fp->f_fl_mutex); -- cgit v1.2.3 From 91ffaa27834b69dc23dfe14a0358f1c70d2938e2 Mon Sep 17 00:00:00 2001 From: Yang Wei Date: Thu, 31 Jul 2014 19:42:29 +0800 Subject: MIPS: kdump: Set correct value to kexec_indirection_page variable Since there is not indirection page in crash type, so the vaule of the head field of kimage structure is not equal to the address of indirection page but IND_DONE. so we have to set kexec_indirection_page variable to the address of the head field of image structure. [ralf@linux-mips.org: Don't add pointless empty line, fix trailing whitespace damage.] Signed-off-by: Yang Wei Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7499/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/machine_kexec.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/arch/mips/kernel/machine_kexec.c b/arch/mips/kernel/machine_kexec.c index 992e18474da5..50980bf3983e 100644 --- a/arch/mips/kernel/machine_kexec.c +++ b/arch/mips/kernel/machine_kexec.c @@ -71,8 +71,12 @@ machine_kexec(struct kimage *image) kexec_start_address = (unsigned long) phys_to_virt(image->start); - kexec_indirection_page = - (unsigned long) phys_to_virt(image->head & PAGE_MASK); + if (image->type == KEXEC_TYPE_DEFAULT) { + kexec_indirection_page = + (unsigned long) phys_to_virt(image->head & PAGE_MASK); + } else { + kexec_indirection_page = (unsigned long)&image->head; + } memcpy((void*)reboot_code_buffer, relocate_new_kernel, relocate_new_kernel_size); -- cgit v1.2.3 From 872687f626e033b4ddfaec1e410057cfc6636d77 Mon Sep 17 00:00:00 2001 From: Johannes Pointner Date: Mon, 25 Aug 2014 09:04:00 +0100 Subject: iio:inkern: fix overwritten -EPROBE_DEFER in of_iio_channel_get_by_name Fixes: a2c12493ed7e ('iio: of_iio_channel_get_by_name() returns non-null pointers for error legs') which improperly assumes that of_iio_channel_get_by_name must always return NULL and thus now hides -EPROBE_DEFER. Signed-off-by: Johannes Pointner Reviewed-by: Guenter Roeck Signed-off-by: Jonathan Cameron Cc: Stable@vger.kernel.org --- drivers/iio/inkern.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/inkern.c b/drivers/iio/inkern.c index c7497009d60a..f0846108d006 100644 --- a/drivers/iio/inkern.c +++ b/drivers/iio/inkern.c @@ -178,7 +178,7 @@ static struct iio_channel *of_iio_channel_get_by_name(struct device_node *np, index = of_property_match_string(np, "io-channel-names", name); chan = of_iio_channel_get(np, index); - if (!IS_ERR(chan)) + if (!IS_ERR(chan) || PTR_ERR(chan) == -EPROBE_DEFER) break; else if (name && index >= 0) { pr_err("ERROR: could not get IIO channel %s:%s(%i)\n", -- cgit v1.2.3 From f153566570fb9e32c2f59182883f4f66048788fb Mon Sep 17 00:00:00 2001 From: Srinivas Pandruvada Date: Fri, 22 Aug 2014 21:48:00 +0100 Subject: iio:trigger: modify return value for iio_trigger_get Instead of a void function, return the trigger pointer. Whilst not in of itself a fix, this makes the following set of 7 fixes cleaner than they would otherwise be. Signed-off-by: Srinivas Pandruvada Signed-off-by: Jonathan Cameron Cc: Stable@vger.kernel.org --- include/linux/iio/trigger.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/include/linux/iio/trigger.h b/include/linux/iio/trigger.h index 4b79ffe7b188..fa76c79a52a1 100644 --- a/include/linux/iio/trigger.h +++ b/include/linux/iio/trigger.h @@ -84,10 +84,12 @@ static inline void iio_trigger_put(struct iio_trigger *trig) put_device(&trig->dev); } -static inline void iio_trigger_get(struct iio_trigger *trig) +static inline struct iio_trigger *iio_trigger_get(struct iio_trigger *trig) { get_device(&trig->dev); __module_get(trig->ops->owner); + + return trig; } /** -- cgit v1.2.3 From 0668a4e4d297328ce08b44d91d160537596115e2 Mon Sep 17 00:00:00 2001 From: Srinivas Pandruvada Date: Fri, 22 Aug 2014 21:48:00 +0100 Subject: iio: accel: bma180: Fix indio_dev->trig assignment This can result in wrong reference count for trigger device, call iio_trigger_get to increment reference. Refer to http://www.spinics.net/lists/linux-iio/msg13669.html for discussion with Jonathan. Signed-off-by: Srinivas Pandruvada Signed-off-by: Jonathan Cameron Cc: Stable@vger.kernel.org --- drivers/iio/accel/bma180.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/accel/bma180.c b/drivers/iio/accel/bma180.c index a077cc86421b..19100fddd2ed 100644 --- a/drivers/iio/accel/bma180.c +++ b/drivers/iio/accel/bma180.c @@ -571,7 +571,7 @@ static int bma180_probe(struct i2c_client *client, trig->ops = &bma180_trigger_ops; iio_trigger_set_drvdata(trig, indio_dev); data->trig = trig; - indio_dev->trig = trig; + indio_dev->trig = iio_trigger_get(trig); ret = iio_trigger_register(trig); if (ret) -- cgit v1.2.3 From 9e5846be33277802c0c76e5c12825d0e4d27f639 Mon Sep 17 00:00:00 2001 From: Srinivas Pandruvada Date: Fri, 22 Aug 2014 21:48:00 +0100 Subject: iio: adc: ad_sigma_delta: Fix indio_dev->trig assignment This can result in wrong reference count for trigger device, call iio_trigger_get to increment reference. Refer to http://www.spinics.net/lists/linux-iio/msg13669.html for discussion with Jonathan. Signed-off-by: Srinivas Pandruvada Acked-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron Cc: Stable@vger.kernel.org --- drivers/iio/adc/ad_sigma_delta.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/adc/ad_sigma_delta.c b/drivers/iio/adc/ad_sigma_delta.c index c55b81f7f970..d10bd0c97233 100644 --- a/drivers/iio/adc/ad_sigma_delta.c +++ b/drivers/iio/adc/ad_sigma_delta.c @@ -472,7 +472,7 @@ static int ad_sd_probe_trigger(struct iio_dev *indio_dev) goto error_free_irq; /* select default trigger */ - indio_dev->trig = sigma_delta->trig; + indio_dev->trig = iio_trigger_get(sigma_delta->trig); return 0; -- cgit v1.2.3 From 55a6f9ddfdea0d2d343cd1b39baf8aa752664b6e Mon Sep 17 00:00:00 2001 From: Srinivas Pandruvada Date: Fri, 22 Aug 2014 21:48:00 +0100 Subject: iio: hid_sensor_hub: Fix indio_dev->trig assignment This can result in wrong reference count for trigger device, call iio_trigger_get to increment reference. Refer to http://www.spinics.net/lists/linux-iio/msg13669.html for discussion with Jonathan. Signed-off-by: Srinivas Pandruvada Signed-off-by: Jonathan Cameron Cc: Stable@vger.kernel.org --- drivers/iio/common/hid-sensors/hid-sensor-trigger.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/iio/common/hid-sensors/hid-sensor-trigger.c b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c index a3109a6f4d86..92068cdbf8c7 100644 --- a/drivers/iio/common/hid-sensors/hid-sensor-trigger.c +++ b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c @@ -122,7 +122,8 @@ int hid_sensor_setup_trigger(struct iio_dev *indio_dev, const char *name, dev_err(&indio_dev->dev, "Trigger Register Failed\n"); goto error_free_trig; } - indio_dev->trig = attrb->trigger = trig; + attrb->trigger = trig; + indio_dev->trig = iio_trigger_get(trig); return ret; -- cgit v1.2.3 From f0e84acd7056e6d7ade551c6439531606ae30a46 Mon Sep 17 00:00:00 2001 From: Srinivas Pandruvada Date: Fri, 22 Aug 2014 21:48:00 +0100 Subject: iio: st_sensors: Fix indio_dev->trig assignment This can result in wrong reference count for trigger device, call iio_trigger_get to increment reference. Refer to http://www.spinics.net/lists/linux-iio/msg13669.html for discussion with Jonathan. Signed-off-by: Srinivas Pandruvada Signed-off-by: Jonathan Cameron Cc: Stable@vger.kernel.org --- drivers/iio/common/st_sensors/st_sensors_trigger.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/common/st_sensors/st_sensors_trigger.c b/drivers/iio/common/st_sensors/st_sensors_trigger.c index 8fc3a97eb266..8d8ca6f1e16a 100644 --- a/drivers/iio/common/st_sensors/st_sensors_trigger.c +++ b/drivers/iio/common/st_sensors/st_sensors_trigger.c @@ -49,7 +49,7 @@ int st_sensors_allocate_trigger(struct iio_dev *indio_dev, dev_err(&indio_dev->dev, "failed to register iio trigger.\n"); goto iio_trigger_register_error; } - indio_dev->trig = sdata->trig; + indio_dev->trig = iio_trigger_get(sdata->trig); return 0; -- cgit v1.2.3 From 0b4dce2ee694a991ef38203ec5ff91a738518cb3 Mon Sep 17 00:00:00 2001 From: Srinivas Pandruvada Date: Fri, 22 Aug 2014 21:48:00 +0100 Subject: iio: gyro: itg3200: Fix indio_dev->trig assignment This can result in wrong reference count for trigger device, call iio_trigger_get to increment reference. Refer to http://www.spinics.net/lists/linux-iio/msg13669.html for discussion with Jonathan. Signed-off-by: Srinivas Pandruvada Signed-off-by: Jonathan Cameron Cc: Stable@vger.kernel.org --- drivers/iio/gyro/itg3200_buffer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/gyro/itg3200_buffer.c b/drivers/iio/gyro/itg3200_buffer.c index e3b3c5084070..eef50e91f17c 100644 --- a/drivers/iio/gyro/itg3200_buffer.c +++ b/drivers/iio/gyro/itg3200_buffer.c @@ -132,7 +132,7 @@ int itg3200_probe_trigger(struct iio_dev *indio_dev) goto error_free_irq; /* select default trigger */ - indio_dev->trig = st->trig; + indio_dev->trig = iio_trigger_get(st->trig); return 0; -- cgit v1.2.3 From b07e3b3850b2e1f09c19f54d3ed7210d9f529e2c Mon Sep 17 00:00:00 2001 From: Srinivas Pandruvada Date: Fri, 22 Aug 2014 21:48:00 +0100 Subject: iio: inv_mpu6050: Fix indio_dev->trig assignment This can result in wrong reference count for trigger device, call iio_trigger_get to increment reference. Refer to http://www.spinics.net/lists/linux-iio/msg13669.html for discussion with Jonathan. Signed-off-by: Srinivas Pandruvada Signed-off-by: Jonathan Cameron Cc: Stable@vger.kernel.org --- drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c index 03b9372c1212..926fccea8de0 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c @@ -135,7 +135,7 @@ int inv_mpu6050_probe_trigger(struct iio_dev *indio_dev) ret = iio_trigger_register(st->trig); if (ret) goto error_free_irq; - indio_dev->trig = st->trig; + indio_dev->trig = iio_trigger_get(st->trig); return 0; -- cgit v1.2.3 From 0495081179212b758775df752e657ea71dcae020 Mon Sep 17 00:00:00 2001 From: Srinivas Pandruvada Date: Fri, 22 Aug 2014 21:48:00 +0100 Subject: iio: meter: ade7758: Fix indio_dev->trig assignment This can result in wrong reference count for trigger device, call iio_trigger_get to increment reference. Refer to http://www.spinics.net/lists/linux-iio/msg13669.html for discussion with Jonathan. Signed-off-by: Srinivas Pandruvada Acked-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron Cc: Stable@vger.kernel.org --- drivers/staging/iio/meter/ade7758_trigger.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/iio/meter/ade7758_trigger.c b/drivers/staging/iio/meter/ade7758_trigger.c index ea01b8f7a2c3..6f45ce0478d7 100644 --- a/drivers/staging/iio/meter/ade7758_trigger.c +++ b/drivers/staging/iio/meter/ade7758_trigger.c @@ -85,7 +85,7 @@ int ade7758_probe_trigger(struct iio_dev *indio_dev) ret = iio_trigger_register(st->trig); /* select default trigger */ - indio_dev->trig = st->trig; + indio_dev->trig = iio_trigger_get(st->trig); if (ret) goto error_free_irq; -- cgit v1.2.3 From 014365f5831dc993ac02b8871a165c9a7bde56cc Mon Sep 17 00:00:00 2001 From: Yang Wei Date: Tue, 5 Aug 2014 13:37:47 +0800 Subject: MIPS: perf: Mark pmu interupt IRQF_NO_THREAD In RT kernel, I ran into the following calltrace, so PMU interrupts cannot be threaded in_atomic(): 1, irqs_disabled(): 1, pid: 0, name: swapper/0 INFO: lockdep is turned off. Call Trace: [] dump_stack+0x1c/0x50 [] __might_sleep+0x13c/0x148 [] rt_spin_lock+0x3c/0xb0 [] __wake_up+0x3c/0x80 [] perf_event_wakeup+0x8c/0xf8 [] perf_pending_event+0x40/0x78 [] irq_work_run+0x74/0xc0 [] mipsxx_pmu_handle_shared_irq+0x110/0x228 [] mipsxx_pmu_handle_irq+0x14/0x30 [] handle_irq_event_percpu+0xbc/0x470 [] handle_percpu_irq+0x98/0xc8 [] generic_handle_irq+0x4c/0x68 [] do_IRQ+0x2c/0x48 [] plat_irq_dispatch+0x64/0xd0 [ralf@linux-mips.org: I don't see why based on this register dump the handler should be marked IRQF_NO_THREAD - but the handler is manipulating per-CPU resources so we don't want it to be rescheduled to another CPU.] Signed-off-by: Yang Wei Cc: a.p.zijlstra@chello.nl Cc: paulus@samba.org Cc: mingo@redhat.com Cc: acme@kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7506/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/perf_event_mipsxx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/kernel/perf_event_mipsxx.c b/arch/mips/kernel/perf_event_mipsxx.c index 14bf74b0f51c..b63f2482f288 100644 --- a/arch/mips/kernel/perf_event_mipsxx.c +++ b/arch/mips/kernel/perf_event_mipsxx.c @@ -558,7 +558,7 @@ static int mipspmu_get_irq(void) if (mipspmu.irq >= 0) { /* Request my own irq handler. */ err = request_irq(mipspmu.irq, mipsxx_pmu_handle_irq, - IRQF_PERCPU | IRQF_NOBALANCING, + IRQF_PERCPU | IRQF_NOBALANCING | IRQF_NO_THREAD, "mips_perf_pmu", NULL); if (err) { pr_warning("Unable to request IRQ%d for MIPS " -- cgit v1.2.3 From 7b626d93453903e36cbc0189f4cbf7b195e2c037 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Fri, 8 Aug 2014 15:09:40 +0200 Subject: MIPS: GIC: Remove useless parens from GICBIS(). Signed-off-by: Ralf Baechle --- arch/mips/include/asm/gic.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/include/asm/gic.h b/arch/mips/include/asm/gic.h index 3f20b2111d56..d7699cf7e135 100644 --- a/arch/mips/include/asm/gic.h +++ b/arch/mips/include/asm/gic.h @@ -49,7 +49,7 @@ #endif #define GICBIS(reg, mask, bits) \ do { u32 data; \ - GICREAD((reg), data); \ + GICREAD(reg, data); \ data &= ~(mask); \ data |= ((bits) & (mask)); \ GICWRITE((reg), data); \ -- cgit v1.2.3 From d610c7ee402a07687a9644ab688fbb9e10c03672 Mon Sep 17 00:00:00 2001 From: Sergey Ryazanov Date: Thu, 14 Aug 2014 02:09:35 +0400 Subject: MIPS: MSP71xx: remove unused plat_irq_dispatch() argument Remove unused argument to make the plat_irq_dispatch() function declaration similar to the realization of other platforms. Signed-off-by: Sergey Ryazanov Cc: Linux MIPS Patchwork: https://patchwork.linux-mips.org/patch/7538/ Signed-off-by: Ralf Baechle --- arch/mips/pmcs-msp71xx/msp_irq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/pmcs-msp71xx/msp_irq.c b/arch/mips/pmcs-msp71xx/msp_irq.c index 941744aabb51..f914c753de21 100644 --- a/arch/mips/pmcs-msp71xx/msp_irq.c +++ b/arch/mips/pmcs-msp71xx/msp_irq.c @@ -51,7 +51,7 @@ static inline void sec_int_dispatch(void) { do_IRQ(MSP_INT_SEC); } * the range 40-71. */ -asmlinkage void plat_irq_dispatch(struct pt_regs *regs) +asmlinkage void plat_irq_dispatch(void) { u32 pending; -- cgit v1.2.3 From 26d551b2454318f0677b2b9b17396cb1ba9975b5 Mon Sep 17 00:00:00 2001 From: Sergey Ryazanov Date: Thu, 14 Aug 2014 02:09:36 +0400 Subject: MIPS: Add common plat_irq_dispatch declaration Add common declaration to get rid of following sparse warning: "symbol 'plat_irq_dispatch' was not declared. Should it be static?" Signed-off-by: Sergey Ryazanov Cc: Linux MIPS Patchwork: https://patchwork.linux-mips.org/patch/7539/ Signed-off-by: Ralf Baechle --- arch/mips/cavium-octeon/setup.c | 1 - arch/mips/include/asm/irq.h | 2 ++ 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/mips/cavium-octeon/setup.c b/arch/mips/cavium-octeon/setup.c index 008e9c8b8eac..dba7cf7656c7 100644 --- a/arch/mips/cavium-octeon/setup.c +++ b/arch/mips/cavium-octeon/setup.c @@ -263,7 +263,6 @@ static uint64_t crashk_size, crashk_base; static int octeon_uart; extern asmlinkage void handle_int(void); -extern asmlinkage void plat_irq_dispatch(void); /** * Return non zero if we are currently running in the Octeon simulator diff --git a/arch/mips/include/asm/irq.h b/arch/mips/include/asm/irq.h index ae1f7b24dd1a..39f07aec640c 100644 --- a/arch/mips/include/asm/irq.h +++ b/arch/mips/include/asm/irq.h @@ -26,6 +26,8 @@ static inline int irq_canonicalize(int irq) #define irq_canonicalize(irq) (irq) /* Sane hardware, sane code ... */ #endif +asmlinkage void plat_irq_dispatch(void); + extern void do_IRQ(unsigned int irq); extern void arch_init_irq(void); -- cgit v1.2.3 From 42e0767145902f578ab92731c90b5c1d1a24974c Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Tue, 12 Aug 2014 20:26:22 +0800 Subject: MIPS: Remove duplicated include from numa.c Signed-off-by: Wei Yongjun Cc: Huacai Chen Cc: Wei Yongjun Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7537/ Signed-off-by: Ralf Baechle --- arch/mips/loongson/loongson-3/numa.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/mips/loongson/loongson-3/numa.c b/arch/mips/loongson/loongson-3/numa.c index ca025a6ba559..37ed184398c6 100644 --- a/arch/mips/loongson/loongson-3/numa.c +++ b/arch/mips/loongson/loongson-3/numa.c @@ -24,8 +24,6 @@ #include #include #include -#include -#include #include #include #include -- cgit v1.2.3 From 4588b58d95c08880d5c67ad277ba534ffb37e7ba Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Mon, 18 Aug 2014 22:01:16 +0200 Subject: MIPS: BCM47XX: Fix reboot problem on BCM4705/BCM4785 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This adds some code based on code from the Broadcom GPL tar to fix the reboot problems on BCM4705/BCM4785. I tried rebooting my device for ~10 times and have never seen a problem. This reverts the changes in the previous commit and adds the real fix as suggested by Rafał. Setting bit 22 in Reg 22, sel 4 puts the BIU (Bus Interface Unit) into async mode. The previous commit was 316cad5c1d4daee998cd1f83ccdb437f6f20d45c [MIPS: BCM47XX: make reboot more relaiable] Signed-off-by: Hauke Mehrtens Cc: jogo@openwrt.org Cc: zajec5@gmail.com Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7545/ Signed-off-by: Ralf Baechle --- arch/mips/bcm47xx/setup.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/arch/mips/bcm47xx/setup.c b/arch/mips/bcm47xx/setup.c index 2b63e7e7d3d3..ad439c273003 100644 --- a/arch/mips/bcm47xx/setup.c +++ b/arch/mips/bcm47xx/setup.c @@ -59,12 +59,21 @@ static void bcm47xx_machine_restart(char *command) switch (bcm47xx_bus_type) { #ifdef CONFIG_BCM47XX_SSB case BCM47XX_BUS_TYPE_SSB: - ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 3); + if (bcm47xx_bus.ssb.chip_id == 0x4785) + write_c0_diag4(1 << 22); + ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 1); + if (bcm47xx_bus.ssb.chip_id == 0x4785) { + __asm__ __volatile__( + ".set\tmips3\n\t" + "sync\n\t" + "wait\n\t" + ".set\tmips0"); + } break; #endif #ifdef CONFIG_BCM47XX_BCMA case BCM47XX_BUS_TYPE_BCMA: - bcma_chipco_watchdog_timer_set(&bcm47xx_bus.bcma.bus.drv_cc, 3); + bcma_chipco_watchdog_timer_set(&bcm47xx_bus.bcma.bus.drv_cc, 1); break; #endif } -- cgit v1.2.3 From c6c7d7c343d97720f4e12678f661d262dafec6f7 Mon Sep 17 00:00:00 2001 From: Manuel Lauss Date: Mon, 18 Aug 2014 17:10:32 +0200 Subject: MIPS: Alchemy: Fix db1200 PSC clock enablement Enable PSC0 (I2C/SPI) clock and leave PSC1 (Audio) alone. This patch restores functionality to both Audio and I2C/SPI. Signed-off-by: Manuel Lauss Cc: Linux-MIPS Patchwork: https://patchwork.linux-mips.org/patch/7544/ Signed-off-by: Ralf Baechle --- arch/mips/alchemy/devboards/db1200.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/arch/mips/alchemy/devboards/db1200.c b/arch/mips/alchemy/devboards/db1200.c index 776188908dfc..8c13675a12e7 100644 --- a/arch/mips/alchemy/devboards/db1200.c +++ b/arch/mips/alchemy/devboards/db1200.c @@ -847,6 +847,7 @@ int __init db1200_dev_setup(void) pr_warn("DB1200: cant get I2C close to 50MHz\n"); else clk_set_rate(c, pfc); + clk_prepare_enable(c); clk_put(c); } @@ -922,11 +923,6 @@ int __init db1200_dev_setup(void) } /* Audio PSC clock is supplied externally. (FIXME: platdata!!) */ - c = clk_get(NULL, "psc1_intclk"); - if (!IS_ERR(c)) { - clk_prepare_enable(c); - clk_put(c); - } __raw_writel(PSC_SEL_CLK_SERCLK, (void __iomem *)KSEG1ADDR(AU1550_PSC1_PHYS_ADDR) + PSC_SEL_OFFSET); wmb(); -- cgit v1.2.3 From a168dc393dde134c7ac9e542d778ed1ec3e25211 Mon Sep 17 00:00:00 2001 From: Markos Chandras Date: Mon, 18 Aug 2014 15:04:11 +0100 Subject: MIPS: Malta: Improve system memory detection for '{e, }memsize' >= 2G Using kstrtol to parse the "{e,}memsize" variables was wrong because this parses signed long numbers. In case of '{e,}memsize' >= 2G, the top bit is set, resulting to -ERANGE errors and possibly random system memory boundaries. We fix this by replacing "kstrtol" with "kstrtoul". We also improve the code to check the kstrtoul return value and print a warning if an error was returned. Signed-off-by: Markos Chandras Cc: # v3.15+ Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7543/ Signed-off-by: Ralf Baechle --- arch/mips/mti-malta/malta-memory.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/arch/mips/mti-malta/malta-memory.c b/arch/mips/mti-malta/malta-memory.c index 0c35dee0a215..8fddd2cdbff7 100644 --- a/arch/mips/mti-malta/malta-memory.c +++ b/arch/mips/mti-malta/malta-memory.c @@ -35,13 +35,19 @@ fw_memblock_t * __init fw_getmdesc(int eva) /* otherwise look in the environment */ memsize_str = fw_getenv("memsize"); - if (memsize_str) - tmp = kstrtol(memsize_str, 0, &memsize); + if (memsize_str) { + tmp = kstrtoul(memsize_str, 0, &memsize); + if (tmp) + pr_warn("Failed to read the 'memsize' env variable.\n"); + } if (eva) { /* Look for ememsize for EVA */ ememsize_str = fw_getenv("ememsize"); - if (ememsize_str) - tmp = kstrtol(ememsize_str, 0, &ememsize); + if (ememsize_str) { + tmp = kstrtoul(ememsize_str, 0, &ememsize); + if (tmp) + pr_warn("Failed to read the 'ememsize' env variable.\n"); + } } if (!memsize && !ememsize) { pr_warn("memsize not set in YAMON, set to default (32Mb)\n"); -- cgit v1.2.3 From 4b34cdde9074b593d5bb82aa3d79b0f73c808889 Mon Sep 17 00:00:00 2001 From: Lars Persson Date: Fri, 8 Aug 2014 15:47:48 +0200 Subject: MIPS: Remove race window in page fault handling Multicore MIPSes without I/D hardware coherency suffered from a race condition in the page fault handler. The page table entry was published before any pending lazy D-cache flush was committed, hence it allowed execution of stale page cache data by other VPEs in the system. To make the cache handling safe we need to perform flushing already in the set_pte_at function. MIPSes without coherent I-caches can get a small increase in flushes due to the unavailability of the execute flag in set_pte_at. [ralf@linux-mips.org: outlining set_pte_at() saves a good k in a test build, so I moved its definition from pgtable.h to cache.c.] Signed-off-by: Lars Persson Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7511/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/pgtable.h | 8 +++----- arch/mips/mm/cache.c | 27 +++++++++++++++++++-------- 2 files changed, 22 insertions(+), 13 deletions(-) diff --git a/arch/mips/include/asm/pgtable.h b/arch/mips/include/asm/pgtable.h index 027c74db13f9..df49a308085c 100644 --- a/arch/mips/include/asm/pgtable.h +++ b/arch/mips/include/asm/pgtable.h @@ -122,6 +122,9 @@ do { \ } \ } while(0) +extern void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, + pte_t pteval); + #if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) #define pte_none(pte) (!(((pte).pte_low | (pte).pte_high) & ~_PAGE_GLOBAL)) @@ -145,7 +148,6 @@ static inline void set_pte(pte_t *ptep, pte_t pte) } } } -#define set_pte_at(mm, addr, ptep, pteval) set_pte(ptep, pteval) static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) { @@ -183,7 +185,6 @@ static inline void set_pte(pte_t *ptep, pte_t pteval) } #endif } -#define set_pte_at(mm, addr, ptep, pteval) set_pte(ptep, pteval) static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) { @@ -390,15 +391,12 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) extern void __update_tlb(struct vm_area_struct *vma, unsigned long address, pte_t pte); -extern void __update_cache(struct vm_area_struct *vma, unsigned long address, - pte_t pte); static inline void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t *ptep) { pte_t pte = *ptep; __update_tlb(vma, address, pte); - __update_cache(vma, address, pte); } static inline void update_mmu_cache_pmd(struct vm_area_struct *vma, diff --git a/arch/mips/mm/cache.c b/arch/mips/mm/cache.c index f7b91d3a371d..7e3ea7766822 100644 --- a/arch/mips/mm/cache.c +++ b/arch/mips/mm/cache.c @@ -119,25 +119,36 @@ void __flush_anon_page(struct page *page, unsigned long vmaddr) EXPORT_SYMBOL(__flush_anon_page); -void __update_cache(struct vm_area_struct *vma, unsigned long address, - pte_t pte) +static void mips_flush_dcache_from_pte(pte_t pteval, unsigned long address) { struct page *page; - unsigned long pfn, addr; - int exec = (vma->vm_flags & VM_EXEC) && !cpu_has_ic_fills_f_dc; + unsigned long pfn = pte_pfn(pteval); - pfn = pte_pfn(pte); if (unlikely(!pfn_valid(pfn))) return; + page = pfn_to_page(pfn); if (page_mapping(page) && Page_dcache_dirty(page)) { - addr = (unsigned long) page_address(page); - if (exec || pages_do_alias(addr, address & PAGE_MASK)) - flush_data_cache_page(addr); + unsigned long page_addr = (unsigned long) page_address(page); + + if (!cpu_has_ic_fills_f_dc || + pages_do_alias(page_addr, address & PAGE_MASK)) + flush_data_cache_page(page_addr); ClearPageDcacheDirty(page); } } +void set_pte_at(struct mm_struct *mm, unsigned long addr, + pte_t *ptep, pte_t pteval) +{ + if (cpu_has_dc_aliases || !cpu_has_ic_fills_f_dc) { + if (pte_present(pteval)) + mips_flush_dcache_from_pte(pteval, addr); + } + + set_pte(ptep, pteval); +} + unsigned long _page_cachable_default; EXPORT_SYMBOL(_page_cachable_default); -- cgit v1.2.3 From 4a2083f004210b526137e05677623344ad154556 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Sat, 9 Aug 2014 10:54:03 -0700 Subject: MIPS: NL: Fix nlm_xlp_defconfig build error The nlm_xlp_defconfig build fails with ./arch/mips/include/asm/mach-netlogic/topology.h:15:0: error: "topology_core_id" redefined [-Werror] In file included from include/linux/smp.h:59:0, [ ...] from arch/mips/mm/dma-default.c:12: ./arch/mips/include/asm/smp.h:41:0: note: this is the location of the previous definition and similar errors. This is caused by commit bda4584cd943d7 ("MIPS: Support CPU topology files in sysfs") which adds the defines to arch/mips/include/asm/smp.h. Remove the defines from arch/mips/include/asm/mach-netlogic/topology.h as no longer necessary. Signed-off-by: Guenter Roeck Cc: Huacai Chen Cc: Andreas Herrmann Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7513/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/mach-netlogic/topology.h | 7 ------- 1 file changed, 7 deletions(-) diff --git a/arch/mips/include/asm/mach-netlogic/topology.h b/arch/mips/include/asm/mach-netlogic/topology.h index ceeb1f5e7129..0eb43c832b25 100644 --- a/arch/mips/include/asm/mach-netlogic/topology.h +++ b/arch/mips/include/asm/mach-netlogic/topology.h @@ -10,13 +10,6 @@ #include -#ifdef CONFIG_SMP -#define topology_physical_package_id(cpu) cpu_to_node(cpu) -#define topology_core_id(cpu) (cpu_logical_map(cpu) / NLM_THREADS_PER_CORE) -#define topology_thread_cpumask(cpu) (&cpu_sibling_map[cpu]) -#define topology_core_cpumask(cpu) cpumask_of_node(cpu_to_node(cpu)) -#endif - #include #endif /* _ASM_MACH_NETLOGIC_TOPOLOGY_H */ -- cgit v1.2.3 From 7ff1740fa48c277628181a047177e0a53f09f682 Mon Sep 17 00:00:00 2001 From: Huacai Chen Date: Mon, 11 Aug 2014 17:10:38 +0800 Subject: MIPS: Loongson: Fix COP2 usage for preemptible kernel In preemptible kernel, only TIF_USEDFPU flag is reliable to distinguish whether _init_fpu()/_restore_fp() is needed. Because the value of the CP0_Status.CU1 isn't changed during preemption. V2: Fix coding style. Signed-off-by: Huacai Chen Cc: John Crispin Cc: Steven J. Hill Cc: Aurelien Jarno Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang Cc: Zhangjin Wu Patchwork: https://patchwork.linux-mips.org/patch/7515/ Signed-off-by: Ralf Baechle --- arch/mips/loongson/loongson-3/cop2-ex.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/mips/loongson/loongson-3/cop2-ex.c b/arch/mips/loongson/loongson-3/cop2-ex.c index 9182e8d2967c..b03e37d2071a 100644 --- a/arch/mips/loongson/loongson-3/cop2-ex.c +++ b/arch/mips/loongson/loongson-3/cop2-ex.c @@ -22,13 +22,13 @@ static int loongson_cu2_call(struct notifier_block *nfb, unsigned long action, void *data) { - int fpu_enabled; + int fpu_owned; int fr = !test_thread_flag(TIF_32BIT_FPREGS); switch (action) { case CU2_EXCEPTION: preempt_disable(); - fpu_enabled = read_c0_status() & ST0_CU1; + fpu_owned = __is_fpu_owner(); if (!fr) set_c0_status(ST0_CU1 | ST0_CU2); else @@ -39,8 +39,8 @@ static int loongson_cu2_call(struct notifier_block *nfb, unsigned long action, KSTK_STATUS(current) |= ST0_FR; else KSTK_STATUS(current) &= ~ST0_FR; - /* If FPU is enabled, we needn't init or restore fp */ - if(!fpu_enabled) { + /* If FPU is owned, we needn't init or restore fp */ + if (!fpu_owned) { set_thread_flag(TIF_USEDFPU); if (!used_math()) { _init_fpu(); -- cgit v1.2.3 From 8d74ea0edb83a57f793a55bb7360a17af8ade5d1 Mon Sep 17 00:00:00 2001 From: Markos Chandras Date: Thu, 24 Jul 2014 12:10:01 +0100 Subject: MIPS: syscall: Fix AUDIT value for O32 processes on MIPS64 On MIPS64, O32 processes set both TIF_32BIT_ADDR and TIF_32BIT_REGS so the previous condition treated O32 applications as N32 when evaluating seccomp filters. Fix the condition to check both TIF_32BIT_{REGS, ADDR} for the N32 AUDIT flag. Signed-off-by: Markos Chandras Patchwork: http://patchwork.linux-mips.org/patch/7480/ Cc: # v3.15+ Signed-off-by: James Hogan --- arch/mips/include/asm/syscall.h | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/arch/mips/include/asm/syscall.h b/arch/mips/include/asm/syscall.h index 17960fe7a8ce..cdf68b33bd65 100644 --- a/arch/mips/include/asm/syscall.h +++ b/arch/mips/include/asm/syscall.h @@ -131,10 +131,12 @@ static inline int syscall_get_arch(void) { int arch = EM_MIPS; #ifdef CONFIG_64BIT - if (!test_thread_flag(TIF_32BIT_REGS)) + if (!test_thread_flag(TIF_32BIT_REGS)) { arch |= __AUDIT_ARCH_64BIT; - if (test_thread_flag(TIF_32BIT_ADDR)) - arch |= __AUDIT_ARCH_CONVENTION_MIPS64_N32; + /* N32 sets only TIF_32BIT_ADDR */ + if (test_thread_flag(TIF_32BIT_ADDR)) + arch |= __AUDIT_ARCH_CONVENTION_MIPS64_N32; + } #endif #if defined(__LITTLE_ENDIAN) arch |= __AUDIT_ARCH_LE; -- cgit v1.2.3 From ad61ba23f192f6d87a4e1f665f2d92ba2bae0950 Mon Sep 17 00:00:00 2001 From: Markos Chandras Date: Thu, 24 Jul 2014 12:10:02 +0100 Subject: MIPS: scall64-o32: Fix indirect syscall detection Commit 4c21b8fd8f14 (MIPS: seccomp: Handle indirect system calls (o32)) added indirect syscall detection for O32 processes running on MIPS64 but it did not work as expected. The reason is the the scall64-o32 implementation differs compared to scall32-o32. In the former, the v0 (syscall number) register contains the absolute syscall number (4000 + X) whereas in the latter it contains the relative syscall number (X). Fix the code to avoid doing an extra addition, and load the v0 register directly to the first argument for syscall_trace_enter. Moreover, set the .reorder assembler option in order to have better control on this part of the assembly code. Signed-off-by: Markos Chandras Patchwork: http://patchwork.linux-mips.org/patch/7481/ Cc: # v3.15+ Signed-off-by: James Hogan --- arch/mips/kernel/scall64-o32.S | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S index 13b964fddc4a..25bb8400156d 100644 --- a/arch/mips/kernel/scall64-o32.S +++ b/arch/mips/kernel/scall64-o32.S @@ -113,15 +113,19 @@ trace_a_syscall: move s0, t2 # Save syscall pointer move a0, sp /* - * syscall number is in v0 unless we called syscall(__NR_###) + * absolute syscall number is in v0 unless we called syscall(__NR_###) * where the real syscall number is in a0 * note: NR_syscall is the first O32 syscall but the macro is * only defined when compiling with -mabi=32 (CONFIG_32BIT) * therefore __NR_O32_Linux is used (4000) */ - addiu a1, v0, __NR_O32_Linux - bnez v0, 1f /* __NR_syscall at offset 0 */ - lw a1, PT_R4(sp) + .set push + .set reorder + subu t1, v0, __NR_O32_Linux + move a1, v0 + bnez t1, 1f /* __NR_syscall at offset 0 */ + lw a1, PT_R4(sp) /* Arg1 for __NR_syscall case */ + .set pop 1: jal syscall_trace_enter -- cgit v1.2.3 From 64316467dc99e6b38ed1ca2197aa93535a7750e0 Mon Sep 17 00:00:00 2001 From: Markos Chandras Date: Mon, 21 Jul 2014 14:35:54 +0100 Subject: MIPS: EVA: Add new EVA header Generic code may need to perform certain operations when EVA is enabled, for example, configure the segmentation registers during boot. In order to avoid using more CONFIG_EVA ifdefs in the arch code, such functions will be added in this header instead. Initially this header contains a macro which will be used by generic code later on during VPEs configuration on secondary cores. All it does is to call the platform specific EVA init code in case EVA is enabled. Reviewed-by: Paul Burton Signed-off-by: Markos Chandras Patchwork: http://patchwork.linux-mips.org/patch/7422/ Signed-off-by: James Hogan --- arch/mips/include/asm/eva.h | 43 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+) create mode 100644 arch/mips/include/asm/eva.h diff --git a/arch/mips/include/asm/eva.h b/arch/mips/include/asm/eva.h new file mode 100644 index 000000000000..a3d1807f227c --- /dev/null +++ b/arch/mips/include/asm/eva.h @@ -0,0 +1,43 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2014, Imagination Technologies Ltd. + * + * EVA functions for generic code + */ + +#ifndef _ASM_EVA_H +#define _ASM_EVA_H + +#include + +#ifdef __ASSEMBLY__ + +#ifdef CONFIG_EVA + +/* + * EVA early init code + * + * Platforms must define their own 'platform_eva_init' macro in + * their kernel-entry-init.h header. This macro usually does the + * platform specific configuration of the segmentation registers, + * and it is normally called from assembly code. + * + */ + +.macro eva_init +platform_eva_init +.endm + +#else + +.macro eva_init +.endm + +#endif /* CONFIG_EVA */ + +#endif /* __ASSEMBLY__ */ + +#endif -- cgit v1.2.3 From 43faaa5c97aa222f7f820f7c1e5200a4c44f6e0f Mon Sep 17 00:00:00 2001 From: Markos Chandras Date: Mon, 21 Jul 2014 14:35:55 +0100 Subject: MIPS: Malta: EVA: Rename 'eva_entry' to 'platform_eva_init' Rename 'eva_entry' to 'platform_eva_init' as required by the new 'eva_init' macro in the eva.h header. Since this macro is now used in a platform dependent way, it must not depend on its caller so move the t1 register initialization inside this macro. Also set the .reorder assembler option in case the caller may have previously set .noreorder. This may allow a few assembler optimizations. Finally include missing headers and document the register usage for this macro. Reviewed-by: Paul Burton Signed-off-by: Markos Chandras Patchwork: http://patchwork.linux-mips.org/patch/7423/ Signed-off-by: James Hogan --- .../include/asm/mach-malta/kernel-entry-init.h | 22 ++++++++++++++++------ 1 file changed, 16 insertions(+), 6 deletions(-) diff --git a/arch/mips/include/asm/mach-malta/kernel-entry-init.h b/arch/mips/include/asm/mach-malta/kernel-entry-init.h index 77eeda77e73c..0cf8622db27f 100644 --- a/arch/mips/include/asm/mach-malta/kernel-entry-init.h +++ b/arch/mips/include/asm/mach-malta/kernel-entry-init.h @@ -10,14 +10,15 @@ #ifndef __ASM_MACH_MIPS_KERNEL_ENTRY_INIT_H #define __ASM_MACH_MIPS_KERNEL_ENTRY_INIT_H +#include +#include + /* * Prepare segments for EVA boot: * * This is in case the processor boots in legacy configuration * (SI_EVAReset is de-asserted and CONFIG5.K == 0) * - * On entry, t1 is loaded with CP0_CONFIG - * * ========================= Mappings ============================= * Virtual memory Physical memory Mapping * 0x00000000 - 0x7fffffff 0x80000000 - 0xfffffffff MUSUK (kuseg) @@ -30,12 +31,20 @@ * * * Lowmem is expanded to 2GB + * + * The following code uses the t0, t1, t2 and ra registers without + * previously preserving them. + * */ - .macro eva_entry + .macro platform_eva_init + + .set push + .set reorder /* * Get Config.K0 value and use it to program * the segmentation registers */ + mfc0 t1, CP0_CONFIG andi t1, 0x7 /* CCA */ move t2, t1 ins t2, t1, 16, 3 @@ -77,6 +86,8 @@ mtc0 t0, $16, 5 sync jal mips_ihb + + .set pop .endm .macro kernel_entry_setup @@ -95,7 +106,7 @@ sll t0, t0, 6 /* SC bit */ bgez t0, 9f - eva_entry + platform_eva_init b 0f 9: /* Assume we came from YAMON... */ @@ -127,8 +138,7 @@ nonsc_processor: #ifdef CONFIG_EVA sync ehb - mfc0 t1, CP0_CONFIG - eva_entry + platform_eva_init #endif .endm -- cgit v1.2.3 From 56d2960958f81db9cfd488e530d2206edede5f8f Mon Sep 17 00:00:00 2001 From: Markos Chandras Date: Mon, 21 Jul 2014 14:35:56 +0100 Subject: MIPS: CPS: Initialize EVA before bringing up VPEs from secondary cores The CPS code is doing several memory loads when configuring the VPEs from secondary cores, so the segmentation control registers must be initialized in time otherwise the kernel will crash with strange TLB exceptions. Reviewed-by: Paul Burton Signed-off-by: Markos Chandras Patchwork: http://patchwork.linux-mips.org/patch/7424/ Signed-off-by: James Hogan --- arch/mips/kernel/cps-vec.S | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/mips/kernel/cps-vec.S b/arch/mips/kernel/cps-vec.S index 6f4f739dad96..e6e97d2a5c9e 100644 --- a/arch/mips/kernel/cps-vec.S +++ b/arch/mips/kernel/cps-vec.S @@ -13,6 +13,7 @@ #include #include #include +#include #include #include #include @@ -166,6 +167,9 @@ dcache_done: 1: jal mips_cps_core_init nop + /* Do any EVA initialization if necessary */ + eva_init + /* * Boot any other VPEs within this core that should be online, and * deactivate this VPE if it should be offline. -- cgit v1.2.3 From 33d9a530d4a87c5d645cfc82f23108ca8d89aa78 Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Tue, 22 Jul 2014 14:51:08 +0300 Subject: MIPS: OCTEON: make get_system_type() thread-safe get_system_type() is not thread-safe on OCTEON. It uses static data, also more dangerous issue is that it's calling cvmx_fuse_read_byte() every time without any synchronization. Currently it's possible to get processes stuck looping forever in kernel simply by launching multiple readers of /proc/cpuinfo: (while true; do cat /proc/cpuinfo > /dev/null; done) & (while true; do cat /proc/cpuinfo > /dev/null; done) & ... Fix by initializing the system type string only once during the early boot. Signed-off-by: Aaro Koskinen Cc: stable@vger.kernel.org Reviewed-by: Markos Chandras Patchwork: http://patchwork.linux-mips.org/patch/7437/ Signed-off-by: James Hogan --- arch/mips/cavium-octeon/setup.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) diff --git a/arch/mips/cavium-octeon/setup.c b/arch/mips/cavium-octeon/setup.c index dba7cf7656c7..38f4c32e2816 100644 --- a/arch/mips/cavium-octeon/setup.c +++ b/arch/mips/cavium-octeon/setup.c @@ -457,6 +457,18 @@ static void octeon_halt(void) octeon_kill_core(NULL); } +static char __read_mostly octeon_system_type[80]; + +static int __init init_octeon_system_type(void) +{ + snprintf(octeon_system_type, sizeof(octeon_system_type), "%s (%s)", + cvmx_board_type_to_string(octeon_bootinfo->board_type), + octeon_model_get_string(read_c0_prid())); + + return 0; +} +early_initcall(init_octeon_system_type); + /** * Return a string representing the system type * @@ -464,11 +476,7 @@ static void octeon_halt(void) */ const char *octeon_board_type_string(void) { - static char name[80]; - sprintf(name, "%s (%s)", - cvmx_board_type_to_string(octeon_bootinfo->board_type), - octeon_model_get_string(read_c0_prid())); - return name; + return octeon_system_type; } const char *get_system_type(void) -- cgit v1.2.3 From 91ff7ac0a35fe375caeb649cca17d8c00c79fa32 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 25 Aug 2014 10:50:12 +0200 Subject: MIPS: Spelling s/confugrations/configurations/ Signed-off-by: Geert Uytterhoeven Cc: Jiri Kosina Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7573/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/page.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/include/asm/page.h b/arch/mips/include/asm/page.h index 5699ec3a71af..e4ef8343ad51 100644 --- a/arch/mips/include/asm/page.h +++ b/arch/mips/include/asm/page.h @@ -37,7 +37,7 @@ /* * This is used for calculating the real page sizes - * for FTLB or VTLB + FTLB confugrations. + * for FTLB or VTLB + FTLB configurations. */ static inline unsigned int page_size_ftlb(unsigned int mmuextdef) { -- cgit v1.2.3 From bbc5367f50d930bbe6ad4750d3250614c7babcc0 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sat, 23 Aug 2014 20:33:25 +0200 Subject: MIPS: BCM63xx: delete double assignment Delete successive assignments to the same location. In each case, the duplicated assignment is modified to be in line with other nearby code. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @@ expression i; @@ *i = ...; i = ...; // Signed-off-by: Julia Lawall Cc: joe@perches.com Cc: kernel-janitors@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7565/ Signed-off-by: Ralf Baechle --- arch/mips/bcm63xx/irq.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/mips/bcm63xx/irq.c b/arch/mips/bcm63xx/irq.c index 37eb2d1fa69a..b94bf44d8d8e 100644 --- a/arch/mips/bcm63xx/irq.c +++ b/arch/mips/bcm63xx/irq.c @@ -434,7 +434,7 @@ static void bcm63xx_init_irq(void) irq_stat_addr[0] += PERF_IRQSTAT_3368_REG; irq_mask_addr[0] += PERF_IRQMASK_3368_REG; irq_stat_addr[1] = 0; - irq_stat_addr[1] = 0; + irq_mask_addr[1] = 0; irq_bits = 32; ext_irq_count = 4; ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_3368; @@ -443,7 +443,7 @@ static void bcm63xx_init_irq(void) irq_stat_addr[0] += PERF_IRQSTAT_6328_REG(0); irq_mask_addr[0] += PERF_IRQMASK_6328_REG(0); irq_stat_addr[1] += PERF_IRQSTAT_6328_REG(1); - irq_stat_addr[1] += PERF_IRQMASK_6328_REG(1); + irq_mask_addr[1] += PERF_IRQMASK_6328_REG(1); irq_bits = 64; ext_irq_count = 4; is_ext_irq_cascaded = 1; -- cgit v1.2.3 From dc24d68d5e25a384ad32cc60bbaccd18b3da30d8 Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Tue, 19 Aug 2014 22:00:07 +0200 Subject: MIPS: IP28: Select correct L1_CACHE_SHIFT IP28 has 128 byte cache lines. Signed-off-by: Thomas Bogendoerfer Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7548/ Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index df51e78a72cc..0c57c4b43fd1 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -546,6 +546,7 @@ config SGI_IP28 # select SYS_HAS_EARLY_PRINTK select SYS_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN + select MIPS_L1_CACHE_SHIFT_7 help This is the SGI Indigo2 with R10000 processor. To compile a Linux kernel that runs on these, say Y here. -- cgit v1.2.3 From 0690999e609a04507dec3a2a372b2c805d071c6a Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Tue, 19 Aug 2014 22:00:11 +0200 Subject: MIPS: IP28: Fix/clean spaces.h Broken values for UNCAC_BASE/IO_BASE caused complete breakage of IP28 builds. Only set special PHY_OFFSET and take everything else from generic spaces.h Signed-off-by: Thomas Bogendoerfer Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7549/ Signed-off-by: Ralf Baechle (cherry picked from commit 81832d7e7962a40d08d9fe2e7e71b7887bc30097) --- arch/mips/include/asm/mach-ip28/spaces.h | 7 ------- 1 file changed, 7 deletions(-) diff --git a/arch/mips/include/asm/mach-ip28/spaces.h b/arch/mips/include/asm/mach-ip28/spaces.h index 5d6a76434d00..c4a912733b65 100644 --- a/arch/mips/include/asm/mach-ip28/spaces.h +++ b/arch/mips/include/asm/mach-ip28/spaces.h @@ -11,15 +11,8 @@ #ifndef _ASM_MACH_IP28_SPACES_H #define _ASM_MACH_IP28_SPACES_H -#define CAC_BASE _AC(0xa800000000000000, UL) - -#define HIGHMEM_START (~0UL) - #define PHYS_OFFSET _AC(0x20000000, UL) -#define UNCAC_BASE _AC(0xc0000000, UL) /* 0xa0000000 + PHYS_OFFSET */ -#define IO_BASE UNCAC_BASE - #include #endif /* _ASM_MACH_IP28_SPACES_H */ -- cgit v1.2.3 From 29593fd5a8149462ed6fad0d522234facdaee6c8 Mon Sep 17 00:00:00 2001 From: Aurelien Jarno Date: Sun, 20 Jul 2014 19:58:23 +0200 Subject: MIPS: ZBOOT: add missing include Commit dc4d7b37 (MIPS: ZBOOT: gather string functions into string.c) moved the string related functions into a separate file, which might cause the following build error, depending on the configuration: | CC arch/mips/boot/compressed/decompress.o | In file included from linux/arch/mips/boot/compressed/../../../../lib/decompress_unxz.c:234:0, | from linux/arch/mips/boot/compressed/decompress.c:67: | linux/arch/mips/boot/compressed/../../../../lib/xz/xz_dec_stream.c: In function 'fill_temp': | linux/arch/mips/boot/compressed/../../../../lib/xz/xz_dec_stream.c:162:2: error: implicit declaration of function 'memcpy' [-Werror=implicit-function-declaration] | cc1: some warnings being treated as errors | linux/scripts/Makefile.build:308: recipe for target 'arch/mips/boot/compressed/decompress.o' failed | make[6]: *** [arch/mips/boot/compressed/decompress.o] Error 1 | linux/arch/mips/Makefile:308: recipe for target 'vmlinuz' failed It does not fail with the standard configuration, as when CONFIG_DYNAMIC_DEBUG is not enabled gets included in include/linux/dynamic_debug.h. There might be other ways for it to get indirectly included. We can't add the include directly in xz_dec_stream.c as some architectures might want to use a different version for the boot/ directory (see for example arch/x86/boot/string.h). Signed-off-by: Aurelien Jarno Cc: stable@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7420/ Signed-off-by: Ralf Baechle --- arch/mips/boot/compressed/decompress.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/mips/boot/compressed/decompress.c b/arch/mips/boot/compressed/decompress.c index b49c7adbfa89..31903cf9709d 100644 --- a/arch/mips/boot/compressed/decompress.c +++ b/arch/mips/boot/compressed/decompress.c @@ -13,6 +13,7 @@ #include #include +#include #include -- cgit v1.2.3 From b10b43ba697c6b571a24b626eaab1d6d79acf14c Mon Sep 17 00:00:00 2001 From: Markos Chandras Date: Tue, 22 Jul 2014 09:29:34 +0100 Subject: MIPS: Kconfig: Select SMP symbols for CMP CMP is an SMP implementation, and as a result of which, it needs to select the SYS_SUPPORTS_SMP and SMP symbols. This fixes the following build problem when CMP is enabled but SMP is not. In file included from arch/mips/kernel/smp-cmp.c:34:0: ./arch/mips/include/asm/smp.h:26:0: error: "raw_smp_processor_id" redefined [-Werror] #define raw_smp_processor_id() (current_thread_info()->cpu) [...] In file included from arch/mips/kernel/smp-cmp.c:34:0: ./arch/mips/include/asm/smp.h:59:20: error: redefinition of 'smp_send_reschedule' [...] ./arch/mips/include/asm/smp.h: In function 'smp_send_reschedule': ./arch/mips/include/asm/smp.h:63:8: error: dereferencing pointer to incomplete type Signed-off-by: Markos Chandras Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7436/ Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 0c57c4b43fd1..376befad6856 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -2030,7 +2030,9 @@ config MIPS_CMP bool "MIPS CMP framework support (DEPRECATED)" depends on SYS_SUPPORTS_MIPS_CMP select MIPS_GIC_IPI + select SMP select SYNC_R4K + select SYS_SUPPORTS_SMP select WEAK_ORDERING default n help -- cgit v1.2.3 From 68c77d8a1e1ad6cfe228390702f3e4eb2bf8e17a Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 25 Aug 2014 19:35:53 +0200 Subject: MIPS: COP2: CPP macro safety fixes. - Don't pass things to macros that couldn't be dereferences if that macro was actually a function. - Don't use empty function-like macros. Signed-off-by: Ralf Baechle --- arch/mips/include/asm/cop2.h | 18 +++++++++--------- arch/mips/include/asm/switch_to.h | 4 ++-- 2 files changed, 11 insertions(+), 11 deletions(-) diff --git a/arch/mips/include/asm/cop2.h b/arch/mips/include/asm/cop2.h index d0352983b94d..51f80bd36fcc 100644 --- a/arch/mips/include/asm/cop2.h +++ b/arch/mips/include/asm/cop2.h @@ -16,8 +16,8 @@ extern void octeon_cop2_save(struct octeon_cop2_state *); extern void octeon_cop2_restore(struct octeon_cop2_state *); -#define cop2_save(r) octeon_cop2_save(r) -#define cop2_restore(r) octeon_cop2_restore(r) +#define cop2_save(r) octeon_cop2_save(&(r)->thread.cp2) +#define cop2_restore(r) octeon_cop2_restore(&(r)->thread.cp2) #define cop2_present 1 #define cop2_lazy_restore 1 @@ -26,26 +26,26 @@ extern void octeon_cop2_restore(struct octeon_cop2_state *); extern void nlm_cop2_save(struct nlm_cop2_state *); extern void nlm_cop2_restore(struct nlm_cop2_state *); -#define cop2_save(r) nlm_cop2_save(r) -#define cop2_restore(r) nlm_cop2_restore(r) + +#define cop2_save(r) nlm_cop2_save(&(r)->thread.cp2) +#define cop2_restore(r) nlm_cop2_restore(&(r)->thread.cp2) #define cop2_present 1 #define cop2_lazy_restore 0 #elif defined(CONFIG_CPU_LOONGSON3) -#define cop2_save(r) -#define cop2_restore(r) - #define cop2_present 1 #define cop2_lazy_restore 1 +#define cop2_save(r) do { (r); } while (0) +#define cop2_restore(r) do { (r); } while (0) #else #define cop2_present 0 #define cop2_lazy_restore 0 -#define cop2_save(r) -#define cop2_restore(r) +#define cop2_save(r) do { (r); } while (0) +#define cop2_restore(r) do { (r); } while (0) #endif enum cu2_ops { diff --git a/arch/mips/include/asm/switch_to.h b/arch/mips/include/asm/switch_to.h index 495c1041a2cc..b928b6f898cd 100644 --- a/arch/mips/include/asm/switch_to.h +++ b/arch/mips/include/asm/switch_to.h @@ -92,7 +92,7 @@ do { \ KSTK_STATUS(prev) &= ~ST0_CU2; \ __c0_stat = read_c0_status(); \ write_c0_status(__c0_stat | ST0_CU2); \ - cop2_save(&prev->thread.cp2); \ + cop2_save(prev); \ write_c0_status(__c0_stat & ~ST0_CU2); \ } \ __clear_software_ll_bit(); \ @@ -111,7 +111,7 @@ do { \ (KSTK_STATUS(current) & ST0_CU2)) { \ __c0_stat = read_c0_status(); \ write_c0_status(__c0_stat | ST0_CU2); \ - cop2_restore(¤t->thread.cp2); \ + cop2_restore(current); \ write_c0_status(__c0_stat & ~ST0_CU2); \ } \ if (cpu_has_dsp) \ -- cgit v1.2.3 From 98fb24af5e6885ae5ae6b1598a875922e0d83a36 Mon Sep 17 00:00:00 2001 From: Andrey Utkin Date: Thu, 17 Jul 2014 17:22:38 +0300 Subject: arch/mips/net/bpf_jit.c: fix failure check static int pkt_type_offset(void) returned -1 in case of failure, and actual (positive) offset value in case of success. In the only instance of its usage, the result was saved to local "unsigned int off" variable, which is used in a lot of places in the same (large) function, so changing its type could cause many warnings. So new signed int variable was added. Signed-off-by: Andrey Utkin Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=80371 Reported-by: David Binderman Cc: linux-kernel@vger.kernel.org Cc: kernel-janitors@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: dborkman@redhat.com Cc: markos.chandras@imgtec.com Patchwork: https://patchwork.linux-mips.org/patch/7380/ Signed-off-by: Ralf Baechle --- arch/mips/net/bpf_jit.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/mips/net/bpf_jit.c b/arch/mips/net/bpf_jit.c index 05a56619ece2..9f7ecbda250c 100644 --- a/arch/mips/net/bpf_jit.c +++ b/arch/mips/net/bpf_jit.c @@ -793,6 +793,7 @@ static int build_body(struct jit_ctx *ctx) const struct sock_filter *inst; unsigned int i, off, load_order, condt; u32 k, b_off __maybe_unused; + int tmp; for (i = 0; i < prog->len; i++) { u16 code; @@ -1332,9 +1333,9 @@ jmp_cmp: case BPF_ANC | SKF_AD_PKTTYPE: ctx->flags |= SEEN_SKB; - off = pkt_type_offset(); + tmp = off = pkt_type_offset(); - if (off < 0) + if (tmp < 0) return -1; emit_load_byte(r_tmp, r_skb, off, ctx); /* Keep only the last 3 bits */ -- cgit v1.2.3 From 4d5b3bdc0ecb0cf5b1e1598eeaaac4b5cb33868d Mon Sep 17 00:00:00 2001 From: Zubair Lutfullah Kakakhel Date: Mon, 14 Jul 2014 16:39:19 +0100 Subject: MIPS: Fix a warning for virt_to_page Compiling mm/highmem.c gives a warning: passing argument 1 of 'virt_to_phys' makes pointer from integer without a cast Fixed by casting to void* Signed-off-by: Zubair Lutfullah Kakakhel Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7337/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/page.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/mips/include/asm/page.h b/arch/mips/include/asm/page.h index e4ef8343ad51..3be81803595d 100644 --- a/arch/mips/include/asm/page.h +++ b/arch/mips/include/asm/page.h @@ -223,7 +223,8 @@ static inline int pfn_valid(unsigned long pfn) #endif -#define virt_to_page(kaddr) pfn_to_page(PFN_DOWN(virt_to_phys(kaddr))) +#define virt_to_page(kaddr) pfn_to_page(PFN_DOWN(virt_to_phys((void *) \ + (kaddr)))) extern int __virt_addr_valid(const volatile void *kaddr); #define virt_addr_valid(kaddr) \ -- cgit v1.2.3 From 42944521af97a3b25516f15f3149aec3779656dc Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 26 Aug 2014 03:03:40 +0200 Subject: MIPS: Wire up new syscalls getrandom and memfd_create. Signed-off-by: Ralf Baechle --- arch/mips/include/uapi/asm/unistd.h | 18 ++++++++++++------ arch/mips/kernel/scall32-o32.S | 2 ++ arch/mips/kernel/scall64-64.S | 2 ++ arch/mips/kernel/scall64-n32.S | 2 ++ arch/mips/kernel/scall64-o32.S | 2 ++ 5 files changed, 20 insertions(+), 6 deletions(-) diff --git a/arch/mips/include/uapi/asm/unistd.h b/arch/mips/include/uapi/asm/unistd.h index 9bc13eaf9d67..fdb4923777d1 100644 --- a/arch/mips/include/uapi/asm/unistd.h +++ b/arch/mips/include/uapi/asm/unistd.h @@ -373,16 +373,18 @@ #define __NR_sched_getattr (__NR_Linux + 350) #define __NR_renameat2 (__NR_Linux + 351) #define __NR_seccomp (__NR_Linux + 352) +#define __NR_getrandom (__NR_Linux + 353) +#define __NR_memfd_create (__NR_Linux + 354) /* * Offset of the last Linux o32 flavoured syscall */ -#define __NR_Linux_syscalls 352 +#define __NR_Linux_syscalls 354 #endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */ #define __NR_O32_Linux 4000 -#define __NR_O32_Linux_syscalls 352 +#define __NR_O32_Linux_syscalls 354 #if _MIPS_SIM == _MIPS_SIM_ABI64 @@ -703,16 +705,18 @@ #define __NR_sched_getattr (__NR_Linux + 310) #define __NR_renameat2 (__NR_Linux + 311) #define __NR_seccomp (__NR_Linux + 312) +#define __NR_getrandom (__NR_Linux + 313) +#define __NR_memfd_create (__NR_Linux + 314) /* * Offset of the last Linux 64-bit flavoured syscall */ -#define __NR_Linux_syscalls 312 +#define __NR_Linux_syscalls 314 #endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */ #define __NR_64_Linux 5000 -#define __NR_64_Linux_syscalls 312 +#define __NR_64_Linux_syscalls 314 #if _MIPS_SIM == _MIPS_SIM_NABI32 @@ -1037,15 +1041,17 @@ #define __NR_sched_getattr (__NR_Linux + 314) #define __NR_renameat2 (__NR_Linux + 315) #define __NR_seccomp (__NR_Linux + 316) +#define __NR_getrandom (__NR_Linux + 317) +#define __NR_memfd_create (__NR_Linux + 318) /* * Offset of the last N32 flavoured syscall */ -#define __NR_Linux_syscalls 316 +#define __NR_Linux_syscalls 318 #endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */ #define __NR_N32_Linux 6000 -#define __NR_N32_Linux_syscalls 316 +#define __NR_N32_Linux_syscalls 318 #endif /* _UAPI_ASM_UNISTD_H */ diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S index f93b4cbec739..744cd10ba599 100644 --- a/arch/mips/kernel/scall32-o32.S +++ b/arch/mips/kernel/scall32-o32.S @@ -577,3 +577,5 @@ EXPORT(sys_call_table) PTR sys_sched_getattr /* 4350 */ PTR sys_renameat2 PTR sys_seccomp + PTR sys_getrandom + PTR sys_memfd_create diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S index 03ebd9979ad2..002b1bc09c38 100644 --- a/arch/mips/kernel/scall64-64.S +++ b/arch/mips/kernel/scall64-64.S @@ -432,4 +432,6 @@ EXPORT(sys_call_table) PTR sys_sched_getattr /* 5310 */ PTR sys_renameat2 PTR sys_seccomp + PTR sys_getrandom + PTR sys_memfd_create .size sys_call_table,.-sys_call_table diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S index ebc9228e2e15..ca6cbbe9805b 100644 --- a/arch/mips/kernel/scall64-n32.S +++ b/arch/mips/kernel/scall64-n32.S @@ -425,4 +425,6 @@ EXPORT(sysn32_call_table) PTR sys_sched_getattr PTR sys_renameat2 /* 6315 */ PTR sys_seccomp + PTR sys_getrandom + PTR sys_memfd_create .size sysn32_call_table,.-sysn32_call_table diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S index 25bb8400156d..9e10d11fbb84 100644 --- a/arch/mips/kernel/scall64-o32.S +++ b/arch/mips/kernel/scall64-o32.S @@ -562,4 +562,6 @@ EXPORT(sys32_call_table) PTR sys_sched_getattr /* 4350 */ PTR sys_renameat2 PTR sys_seccomp + PTR sys_getrandom + PTR sys_memfd_create .size sys32_call_table,.-sys32_call_table -- cgit v1.2.3 From dc578706c43fafb628ea2f23d44e8adb247fc60d Mon Sep 17 00:00:00 2001 From: Huacai Chen Date: Tue, 26 Aug 2014 14:41:31 +0800 Subject: MIPS: Move CPU topology macros to topology.h The correct position is topology.h, and this fix macros redefinition problems for Netlogic. [ralf@linux-mips.org: Fix build - the original patch broke most configurations.] Signed-off-by: Huacai Chen Cc: Jayachandran C. Cc: John Crispin Cc: Steven J. Hill Cc: Aurelien Jarno Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang Cc: Zhangjin Wu Patchwork: https://patchwork.linux-mips.org/patch/7575/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/smp.h | 5 ----- arch/mips/include/asm/topology.h | 8 ++++++++ 2 files changed, 8 insertions(+), 5 deletions(-) diff --git a/arch/mips/include/asm/smp.h b/arch/mips/include/asm/smp.h index 1e0f20a9cdda..eacf865d21c2 100644 --- a/arch/mips/include/asm/smp.h +++ b/arch/mips/include/asm/smp.h @@ -37,11 +37,6 @@ extern int __cpu_logical_map[NR_CPUS]; #define NO_PROC_ID (-1) -#define topology_physical_package_id(cpu) (cpu_data[cpu].package) -#define topology_core_id(cpu) (cpu_data[cpu].core) -#define topology_core_cpumask(cpu) (&cpu_core_map[cpu]) -#define topology_thread_cpumask(cpu) (&cpu_sibling_map[cpu]) - #define SMP_RESCHEDULE_YOURSELF 0x1 /* XXX braindead */ #define SMP_CALL_FUNCTION 0x2 /* Octeon - Tell another core to flush its icache */ diff --git a/arch/mips/include/asm/topology.h b/arch/mips/include/asm/topology.h index 20ea4859c822..3e307ec2afba 100644 --- a/arch/mips/include/asm/topology.h +++ b/arch/mips/include/asm/topology.h @@ -9,5 +9,13 @@ #define __ASM_TOPOLOGY_H #include +#include + +#ifdef CONFIG_SMP +#define topology_physical_package_id(cpu) (cpu_data[cpu].package) +#define topology_core_id(cpu) (cpu_data[cpu].core) +#define topology_core_cpumask(cpu) (&cpu_core_map[cpu]) +#define topology_thread_cpumask(cpu) (&cpu_sibling_map[cpu]) +#endif #endif /* __ASM_TOPOLOGY_H */ -- cgit v1.2.3 From 256aae5eac6d328067d1a986a7c5df6f19bdc8b4 Mon Sep 17 00:00:00 2001 From: Wang Nan Date: Mon, 28 Jul 2014 20:20:19 +0800 Subject: kprobes/x86: Free 'optinsn' cache when range check fails This patch frees the 'optinsn' slot when we get a range check error, to prevent memory leaks. Before this patch, cache entry in kprobe_insn_cache() won't be freed if kprobe optimizing fails due to range check failure. Signed-off-by: Wang Nan Acked-by: Masami Hiramatsu Cc: Pei Feiyue Link: http://lkml.kernel.org/r/1406550019-70935-1-git-send-email-wangnan0@huawei.com Signed-off-by: Ingo Molnar --- arch/x86/kernel/kprobes/opt.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/x86/kernel/kprobes/opt.c b/arch/x86/kernel/kprobes/opt.c index f304773285ae..f1314d0bcf0a 100644 --- a/arch/x86/kernel/kprobes/opt.c +++ b/arch/x86/kernel/kprobes/opt.c @@ -338,8 +338,10 @@ int arch_prepare_optimized_kprobe(struct optimized_kprobe *op) * a relative jump. */ rel = (long)op->optinsn.insn - (long)op->kp.addr + RELATIVEJUMP_SIZE; - if (abs(rel) > 0x7fffffff) + if (abs(rel) > 0x7fffffff) { + __arch_remove_optimized_kprobe(op, 0); return -ERANGE; + } buf = (u8 *)op->optinsn.insn; -- cgit v1.2.3 From f3761db1646d3ccb9ada2df8e27553a73ef43826 Mon Sep 17 00:00:00 2001 From: Jiang Liu Date: Sat, 30 Aug 2014 15:15:16 +0800 Subject: x86, irq: Fix build error caused by 9eabc99a635a77cbf09 Commit 9eabc99a635a77cbf09 causes following build error when IOAPIC is disabled. arch/x86/pci/irq.c: In function 'pirq_disable_irq': >> arch/x86/pci/irq.c:1259:2: error: implicit declaration of function 'mp_should_keep_irq' [-Werror=implicit-function-declaration] if (io_apic_assign_pci_irqs && !mp_should_keep_irq(&dev->dev) && ^ cc1: some warnings being treated as errors Signed-off-by: Jiang Liu Cc: Konrad Rzeszutek Wilk Cc: Tony Luck Cc: Joerg Roedel Cc: Greg Kroah-Hartman Cc: Benjamin Herrenschmidt Cc: Rafael J. Wysocki Cc: Bjorn Helgaas Cc: Randy Dunlap Cc: Yinghai Lu Cc: Borislav Petkov Cc: Grant Likely Link: http://lkml.kernel.org/r/1409382916-10649-1-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner --- arch/x86/include/asm/io_apic.h | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h index 478c490f3654..1733ab49ac5e 100644 --- a/arch/x86/include/asm/io_apic.h +++ b/arch/x86/include/asm/io_apic.h @@ -239,6 +239,7 @@ static inline int mp_find_ioapic(u32 gsi) { return 0; } static inline u32 mp_pin_to_gsi(int ioapic, int pin) { return UINT_MAX; } static inline int mp_map_gsi_to_irq(u32 gsi, unsigned int flags) { return gsi; } static inline void mp_unmap_irq(int irq) { } +static inline bool mp_should_keep_irq(struct device *dev) { return 1; } static inline int save_ioapic_entries(void) { -- cgit v1.2.3 From d9f26748128c73ec6bed2846ca52fb1c2edc3ced Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Sun, 31 Aug 2014 12:44:09 +0800 Subject: spi: fsl: Don't use devm_kzalloc in master->setup callback device_add() expects that any memory allocated via devm_* API is only done in the device's probe function. Fix below boot warning: [ 3.092348] WARNING: at drivers/base/dd.c:286 [ 3.096637] Modules linked in: [ 3.099697] CPU: 0 PID: 25 Comm: kworker/u2:1 Tainted: G W 3.16.1-s3k-drv-999-svn5771_knld-999 #158 [ 3.109610] Workqueue: deferwq deferred_probe_work_func [ 3.114736] task: c787f020 ti: c790c000 task.ti: c790c000 [ 3.120062] NIP: c01df158 LR: c01df144 CTR: 00000000 [ 3.124983] REGS: c790db30 TRAP: 0700 Tainted: G W (3.16.1-s3k-drv-999-svn5771_knld-999) [ 3.134162] MSR: 00029032 CR: 22002082 XER: 20000000 [ 3.140703] [ 3.140703] GPR00: 00000001 c790dbe0 c787f020 00000044 00000054 00000308 c056da0e 20737069 [ 3.140703] GPR08: 33323736 000ebfe0 00000308 000ebfdf 22002082 00000000 c046c5a0 c046c608 [ 3.140703] GPR16: c046c614 c046c620 c046c62c c046c638 c046c648 c046c654 c046c68c c046c6c4 [ 3.140703] GPR24: 00000000 00000000 00000003 c0401aa0 c0596638 c059662c c054e7a8 c7996800 [ 3.170102] NIP [c01df158] driver_probe_device+0xf8/0x334 [ 3.175431] LR [c01df144] driver_probe_device+0xe4/0x334 [ 3.180633] Call Trace: [ 3.183093] [c790dbe0] [c01df144] driver_probe_device+0xe4/0x334 (unreliable) [ 3.190147] [c790dc10] [c01dd15c] bus_for_each_drv+0x7c/0xc0 [ 3.195741] [c790dc40] [c01df5fc] device_attach+0xcc/0xf8 [ 3.201076] [c790dc60] [c01dd6d4] bus_probe_device+0xb4/0xc4 [ 3.206666] [c790dc80] [c01db9f8] device_add+0x270/0x564 [ 3.211923] [c790dcc0] [c0219e84] spi_add_device+0xc0/0x190 [ 3.217427] [c790dce0] [c021a79c] spi_register_master+0x720/0x834 [ 3.223455] [c790dd40] [c021cb48] of_fsl_spi_probe+0x55c/0x614 [ 3.229234] [c790dda0] [c01e0d2c] platform_drv_probe+0x30/0x74 [ 3.234987] [c790ddb0] [c01df18c] driver_probe_device+0x12c/0x334 [ 3.241008] [c790dde0] [c01dd15c] bus_for_each_drv+0x7c/0xc0 [ 3.246602] [c790de10] [c01df5fc] device_attach+0xcc/0xf8 [ 3.251937] [c790de30] [c01dd6d4] bus_probe_device+0xb4/0xc4 [ 3.257536] [c790de50] [c01de9d8] deferred_probe_work_func+0x98/0xe0 [ 3.263816] [c790de70] [c00305b8] process_one_work+0x18c/0x440 [ 3.269577] [c790dea0] [c0030a00] worker_thread+0x194/0x67c [ 3.275105] [c790def0] [c0039198] kthread+0xd0/0xe4 [ 3.279911] [c790df40] [c000c6d0] ret_from_kernel_thread+0x5c/0x64 [ 3.285970] Instruction dump: [ 3.288900] 80de0000 419e01d0 3b7b0038 3c60c046 7f65db78 38635264 48211b99 813f00a0 [ 3.296559] 381f00a0 7d290278 3169ffff 7c0b4910 <0f000000> 93df0044 7fe3fb78 4bfffd4d Reported-by: leroy christophe Signed-off-by: Axel Lin Tested-by: Christophe Leroy Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- drivers/spi/spi-fsl-espi.c | 15 ++++++++++++--- drivers/spi/spi-fsl-spi.c | 10 +++++++--- 2 files changed, 19 insertions(+), 6 deletions(-) diff --git a/drivers/spi/spi-fsl-espi.c b/drivers/spi/spi-fsl-espi.c index 8ebd724e4c59..429e11190265 100644 --- a/drivers/spi/spi-fsl-espi.c +++ b/drivers/spi/spi-fsl-espi.c @@ -452,16 +452,16 @@ static int fsl_espi_setup(struct spi_device *spi) int retval; u32 hw_mode; u32 loop_mode; - struct spi_mpc8xxx_cs *cs = spi->controller_state; + struct spi_mpc8xxx_cs *cs = spi_get_ctldata(spi); if (!spi->max_speed_hz) return -EINVAL; if (!cs) { - cs = devm_kzalloc(&spi->dev, sizeof(*cs), GFP_KERNEL); + cs = kzalloc(sizeof(*cs), GFP_KERNEL); if (!cs) return -ENOMEM; - spi->controller_state = cs; + spi_set_ctldata(spi, cs); } mpc8xxx_spi = spi_master_get_devdata(spi->master); @@ -496,6 +496,14 @@ static int fsl_espi_setup(struct spi_device *spi) return 0; } +static void fsl_espi_cleanup(struct spi_device *spi) +{ + struct spi_mpc8xxx_cs *cs = spi_get_ctldata(spi); + + kfree(cs); + spi_set_ctldata(spi, NULL); +} + void fsl_espi_cpu_irq(struct mpc8xxx_spi *mspi, u32 events) { struct fsl_espi_reg *reg_base = mspi->reg_base; @@ -605,6 +613,7 @@ static struct spi_master * fsl_espi_probe(struct device *dev, master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 16); master->setup = fsl_espi_setup; + master->cleanup = fsl_espi_cleanup; mpc8xxx_spi = spi_master_get_devdata(master); mpc8xxx_spi->spi_do_one_msg = fsl_espi_do_one_msg; diff --git a/drivers/spi/spi-fsl-spi.c b/drivers/spi/spi-fsl-spi.c index 9452f6740997..590f31bc0aba 100644 --- a/drivers/spi/spi-fsl-spi.c +++ b/drivers/spi/spi-fsl-spi.c @@ -425,16 +425,16 @@ static int fsl_spi_setup(struct spi_device *spi) struct fsl_spi_reg *reg_base; int retval; u32 hw_mode; - struct spi_mpc8xxx_cs *cs = spi->controller_state; + struct spi_mpc8xxx_cs *cs = spi_get_ctldata(spi); if (!spi->max_speed_hz) return -EINVAL; if (!cs) { - cs = devm_kzalloc(&spi->dev, sizeof(*cs), GFP_KERNEL); + cs = kzalloc(sizeof(*cs), GFP_KERNEL); if (!cs) return -ENOMEM; - spi->controller_state = cs; + spi_set_ctldata(spi, cs); } mpc8xxx_spi = spi_master_get_devdata(spi->master); @@ -496,9 +496,13 @@ static int fsl_spi_setup(struct spi_device *spi) static void fsl_spi_cleanup(struct spi_device *spi) { struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(spi->master); + struct spi_mpc8xxx_cs *cs = spi_get_ctldata(spi); if (mpc8xxx_spi->type == TYPE_GRLIB && gpio_is_valid(spi->cs_gpio)) gpio_free(spi->cs_gpio); + + kfree(cs); + spi_set_ctldata(spi, NULL); } static void fsl_spi_cpu_irq(struct mpc8xxx_spi *mspi, u32 events) -- cgit v1.2.3 From a97c883a16da7e0691a3be5465926c92a8da4da6 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Sun, 31 Aug 2014 12:47:06 +0800 Subject: spi: dw: Don't use devm_kzalloc in master->setup callback device_add() expects that any memory allocated via devm_* API is only done in the device's probe function. Fix below boot warning: WARNING: CPU: 1 PID: 1 at drivers/base/dd.c:286 driver_probe_device+0x2b4/0x2f4() Modules linked in: CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.16.0-10474-g835c90b-dirty #160 [] (unwind_backtrace) from [] (show_stack+0x20/0x24) [] (show_stack) from [] (dump_stack+0x7c/0x98) [] (dump_stack) from [] (warn_slowpath_common+0x78/0x9c) [] (warn_slowpath_common) from [] (warn_slowpath_null+0x2c/0x34) [] (warn_slowpath_null) from [] (driver_probe_device+0x2b4/0x2f4) [] (driver_probe_device) from [] (__device_attach+0x50/0x54) [] (__device_attach) from [] (bus_for_each_drv+0x54/0x9c) [] (bus_for_each_drv) from [] (device_attach+0x84/0x90) [] (device_attach) from [] (bus_probe_device+0x94/0xb8) [] (bus_probe_device) from [] (device_add+0x434/0x4fc) [] (device_add) from [] (spi_add_device+0x98/0x164) [] (spi_add_device) from [] (spi_register_master+0x598/0x768) [] (spi_register_master) from [] (devm_spi_register_master+0x40/0x80) [] (devm_spi_register_master) from [] (dw_spi_add_host+0x1a8/0x258) [] (dw_spi_add_host) from [] (dw_spi_mmio_probe+0x1d4/0x294) [] (dw_spi_mmio_probe) from [] (platform_drv_probe+0x3c/0x6c) [] (platform_drv_probe) from [] (driver_probe_device+0xec/0x2f4) [] (driver_probe_device) from [] (__driver_attach+0x9c/0xa0) [] (__driver_attach) from [] (bus_for_each_dev+0x64/0x98) [] (bus_for_each_dev) from [] (driver_attach+0x2c/0x30) [] (driver_attach) from [] (bus_add_driver+0xdc/0x1f4) [] (bus_add_driver) from [] (driver_register+0x88/0x104) [] (driver_register) from [] (__platform_driver_register+0x58/0x6c) [] (__platform_driver_register) from [] (dw_spi_mmio_driver_init+0x18/0x20) [] (dw_spi_mmio_driver_init) from [] (do_one_initcall+0x90/0x1d4) [] (do_one_initcall) from [] (kernel_init_freeable+0x178/0x248) [] (kernel_init_freeable) from [] (kernel_init+0x18/0xfc) [] (kernel_init) from [] (ret_from_fork+0x14/0x20) Reported-by: Thor Thayer Signed-off-by: Axel Lin Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- drivers/spi/spi-dw.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c index 29f33143b795..b4508db2edcd 100644 --- a/drivers/spi/spi-dw.c +++ b/drivers/spi/spi-dw.c @@ -547,8 +547,7 @@ static int dw_spi_setup(struct spi_device *spi) /* Only alloc on first setup */ chip = spi_get_ctldata(spi); if (!chip) { - chip = devm_kzalloc(&spi->dev, sizeof(struct chip_data), - GFP_KERNEL); + chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL); if (!chip) return -ENOMEM; spi_set_ctldata(spi, chip); @@ -606,6 +605,14 @@ static int dw_spi_setup(struct spi_device *spi) return 0; } +static void dw_spi_cleanup(struct spi_device *spi) +{ + struct chip_data *chip = spi_get_ctldata(spi); + + kfree(chip); + spi_set_ctldata(spi, NULL); +} + /* Restart the controller, disable all interrupts, clean rx fifo */ static void spi_hw_init(struct dw_spi *dws) { @@ -661,6 +668,7 @@ int dw_spi_add_host(struct device *dev, struct dw_spi *dws) master->bus_num = dws->bus_num; master->num_chipselect = dws->num_cs; master->setup = dw_spi_setup; + master->cleanup = dw_spi_cleanup; master->transfer_one_message = dw_spi_transfer_one_message; master->max_speed_hz = dws->max_freq; -- cgit v1.2.3 From 7e66cbc93f876e24c2f8434cf011b94be242005e Mon Sep 17 00:00:00 2001 From: Konstantin Khlebnikov Date: Thu, 28 Aug 2014 12:49:36 +0100 Subject: ARM: 8132/1: LPAE: drop wrong carry flag correction after adding TTBR1_OFFSET ARM: LPAE: drop wrong carry flag correction after adding TTBR1_OFFSET In commit 7fb00c2fca4b6c58be521eb3676cf4b4ba8dde3b ("ARM: 8114/1: LPAE: load upper bits of early TTBR0/TTBR1") part which fixes carrying in adding TTBR1_OFFSET to TTRR1 was wrong: addls ttbr1, ttbr1, #TTBR1_OFFSET adcls tmp, tmp, #0 addls doesn't update flags, adcls adds carry from cmp above: cmp ttbr1, tmp @ PHYS_OFFSET > PAGE_OFFSET? Condition 'ls' means carry flag is clear or zero flag is set, thus only one case is affected: when PHYS_OFFSET == PAGE_OFFSET. It seems safer to remove this fixup. Bug is here for ages and nobody complained. Let's fix it separately. Reported-and-Tested-by: Jassi Brar Signed-off-by: Konstantin Khlebnikov Signed-off-by: Russell King --- arch/arm/mm/proc-v7-3level.S | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/mm/proc-v7-3level.S b/arch/arm/mm/proc-v7-3level.S index 1a24e9232ec8..b64e67c7f176 100644 --- a/arch/arm/mm/proc-v7-3level.S +++ b/arch/arm/mm/proc-v7-3level.S @@ -146,7 +146,6 @@ ENDPROC(cpu_v7_set_pte_ext) mov \tmp, \ttbr1, lsr #(32 - ARCH_PGD_SHIFT) @ upper bits mov \ttbr1, \ttbr1, lsl #ARCH_PGD_SHIFT @ lower bits addls \ttbr1, \ttbr1, #TTBR1_OFFSET - adcls \tmp, \tmp, #0 mcrr p15, 1, \ttbr1, \tmp, c2 @ load TTBR1 mov \tmp, \ttbr0, lsr #(32 - ARCH_PGD_SHIFT) @ upper bits mov \ttbr0, \ttbr0, lsl #ARCH_PGD_SHIFT @ lower bits -- cgit v1.2.3 From a040803a9d6b8c1876d3487a5cb69602ebcbb82c Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Mon, 1 Sep 2014 17:14:29 +0100 Subject: ARM: 8133/1: use irq_set_affinity with force=false when migrating irqs Since commit 1dbfa187dad ("ARM: irq migration: force migration off CPU going down") the ARM interrupt migration code on cpu offline calls irqchip.irq_set_affinity() with the argument force=true. At the point of this change the argument had no effect because it was not used by any interrupt chip driver and there was no semantics defined. This changed with commit 01f8fa4f01d8 ("genirq: Allow forcing cpu affinity of interrupts") which made the force argument useful to route interrupts to not yet online cpus without checking the target cpu against the cpu online mask. The following commit ffde1de64012 ("irqchip: gic: Support forced affinity setting") implemented this for the GIC interrupt controller. As a consequence the ARM cpu offline irq migration fails if CPU0 is offlined, because CPU0 is still set in the affinity mask and the validataion against cpu online mask is skipped to the force argument being true. The following first_cpu(mask) selection always selects CPU0 as the target. Solve the issue by calling irq_set_affinity() with force=false from the CPU offline irq migration code so the GIC driver validates the affinity mask against CPU online mask and therefore removes CPU0 from the possible target candidates. Tested on TC2 hotpluging CPU0 in and out. Without this patch the system locks up as the IRQs are not migrated away from CPU0. Signed-off-by: Sudeep Holla Acked-by: Thomas Gleixner Acked-by: Mark Rutland Cc: # 3.10.x Signed-off-by: Russell King --- arch/arm/kernel/irq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index 2c4257604513..5c4d38e32a51 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -175,7 +175,7 @@ static bool migrate_one_irq(struct irq_desc *desc) c = irq_data_get_irq_chip(d); if (!c->irq_set_affinity) pr_debug("IRQ%u: unable to set affinity\n", d->irq); - else if (c->irq_set_affinity(d, affinity, true) == IRQ_SET_MASK_OK && ret) + else if (c->irq_set_affinity(d, affinity, false) == IRQ_SET_MASK_OK && ret) cpumask_copy(d->affinity, affinity); return ret; -- cgit v1.2.3 From 58e43d90b9cb75b4dd42ba1481d83011fa7412df Mon Sep 17 00:00:00 2001 From: Sakari Ailus Date: Tue, 5 Aug 2014 08:01:08 -0300 Subject: [media] smiapp: Fix power count handling The sensor may be powered by either one of its sub-devices being accessed from the user space (an open file handle) or by its s_power() op being called with non-zero on argument. The driver counts the users and if any reason to keep the device powered exists it will be powered. However, a faulty condition was used in recognising the need to power off the sensor, leading it to be powered off every time any of its uses went away. Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab --- drivers/media/i2c/smiapp/smiapp-core.c | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-) diff --git a/drivers/media/i2c/smiapp/smiapp-core.c b/drivers/media/i2c/smiapp/smiapp-core.c index 1eaf975d3612..632bd9efdc97 100644 --- a/drivers/media/i2c/smiapp/smiapp-core.c +++ b/drivers/media/i2c/smiapp/smiapp-core.c @@ -1282,19 +1282,12 @@ static int smiapp_set_power(struct v4l2_subdev *subdev, int on) mutex_lock(&sensor->power_mutex); - /* - * If the power count is modified from 0 to != 0 or from != 0 - * to 0, update the power state. - */ - if (!sensor->power_count == !on) - goto out; - - if (on) { + if (on && !sensor->power_count) { /* Power on and perform initialisation. */ ret = smiapp_power_on(sensor); if (ret < 0) goto out; - } else { + } else if (!on && sensor->power_count == 1) { smiapp_power_off(sensor); } -- cgit v1.2.3 From 60b31b72d84b89f638f2d7c93ce5cb6fd53a66e4 Mon Sep 17 00:00:00 2001 From: Sakari Ailus Date: Fri, 28 Mar 2014 11:35:12 -0300 Subject: [media] smiapp: Set sub-device owner The smiapp driver is the owner of the sub-devices exposed by the smiapp driver. This prevents unloading the module whilst it's in use. Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab --- drivers/media/i2c/smiapp/smiapp-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/i2c/smiapp/smiapp-core.c b/drivers/media/i2c/smiapp/smiapp-core.c index 632bd9efdc97..62acb10630f9 100644 --- a/drivers/media/i2c/smiapp/smiapp-core.c +++ b/drivers/media/i2c/smiapp/smiapp-core.c @@ -2565,7 +2565,7 @@ static int smiapp_registered(struct v4l2_subdev *subdev) this->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; this->sd.internal_ops = &smiapp_internal_ops; - this->sd.owner = NULL; + this->sd.owner = THIS_MODULE; v4l2_set_subdevdata(&this->sd, client); rval = media_entity_init(&this->sd.entity, -- cgit v1.2.3 From 6a03dc92cc2edfa2257502557b9f714893987383 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Tue, 26 Aug 2014 02:59:53 -0300 Subject: [media] cx18: fix kernel oops with tda8290 tuner This was caused by an uninitialized setup.config field. Based on a suggestion from Devin Heitmueller. Signed-off-by: Hans Verkuil Thanks-to: Devin Heitmueller Reported-by: Scott Robinson Tested-by: Hans Verkuil Cc: stable@vger.kernel.org # for v3.10 and up Signed-off-by: Mauro Carvalho Chehab --- drivers/media/pci/cx18/cx18-driver.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/pci/cx18/cx18-driver.c b/drivers/media/pci/cx18/cx18-driver.c index 716bdc57fac6..83f5074706f9 100644 --- a/drivers/media/pci/cx18/cx18-driver.c +++ b/drivers/media/pci/cx18/cx18-driver.c @@ -1091,6 +1091,7 @@ static int cx18_probe(struct pci_dev *pci_dev, setup.addr = ADDR_UNSET; setup.type = cx->options.tuner; setup.mode_mask = T_ANALOG_TV; /* matches TV tuners */ + setup.config = NULL; if (cx->options.radio > 0) setup.mode_mask |= T_RADIO; setup.tuner_callback = (setup.type == TUNER_XC2028) ? -- cgit v1.2.3 From 03be88ee4ab3acceddca43f11f4d01bcd6edcb93 Mon Sep 17 00:00:00 2001 From: Jyri Sarha Date: Wed, 3 Sep 2014 15:52:33 +0300 Subject: ASoC: tlv320aic31xx: Fix 24bit samples with I2S format and 12MHz mclk I2S format requires bitclock to have an exact amount of cycles in a frame for audio to work cleanly. With dsp formats that is not so important. Updates aic31xx_setup_pll() to look for a line in aic31xx_divs table that produces the best match for the bitclock and adds lines to aic31xx_divs for 12MHz mclk and 24bit samples. Signed-off-by: Jyri Sarha Tested-by: Peter Ujfalusi Signed-off-by: Mark Brown --- sound/soc/codecs/tlv320aic31xx.c | 51 ++++++++++++++++++++++++++++++---------- 1 file changed, 39 insertions(+), 12 deletions(-) diff --git a/sound/soc/codecs/tlv320aic31xx.c b/sound/soc/codecs/tlv320aic31xx.c index 0f64c7890eed..aea9e1ff9126 100644 --- a/sound/soc/codecs/tlv320aic31xx.c +++ b/sound/soc/codecs/tlv320aic31xx.c @@ -189,46 +189,57 @@ static const struct aic31xx_rate_divs aic31xx_divs[] = { /* mclk rate pll: p j d dosr ndac mdac aors nadc madc */ /* 8k rate */ {12000000, 8000, 1, 8, 1920, 128, 48, 2, 128, 48, 2}, + {12000000, 8000, 1, 8, 1920, 128, 32, 3, 128, 32, 3}, {24000000, 8000, 2, 8, 1920, 128, 48, 2, 128, 48, 2}, {25000000, 8000, 2, 7, 8643, 128, 48, 2, 128, 48, 2}, /* 11.025k rate */ {12000000, 11025, 1, 7, 5264, 128, 32, 2, 128, 32, 2}, + {12000000, 11025, 1, 8, 4672, 128, 24, 3, 128, 24, 3}, {24000000, 11025, 2, 7, 5264, 128, 32, 2, 128, 32, 2}, {25000000, 11025, 2, 7, 2253, 128, 32, 2, 128, 32, 2}, /* 16k rate */ {12000000, 16000, 1, 8, 1920, 128, 24, 2, 128, 24, 2}, + {12000000, 16000, 1, 8, 1920, 128, 16, 3, 128, 16, 3}, {24000000, 16000, 2, 8, 1920, 128, 24, 2, 128, 24, 2}, {25000000, 16000, 2, 7, 8643, 128, 24, 2, 128, 24, 2}, /* 22.05k rate */ {12000000, 22050, 1, 7, 5264, 128, 16, 2, 128, 16, 2}, + {12000000, 22050, 1, 8, 4672, 128, 12, 3, 128, 12, 3}, {24000000, 22050, 2, 7, 5264, 128, 16, 2, 128, 16, 2}, {25000000, 22050, 2, 7, 2253, 128, 16, 2, 128, 16, 2}, /* 32k rate */ {12000000, 32000, 1, 8, 1920, 128, 12, 2, 128, 12, 2}, + {12000000, 32000, 1, 8, 1920, 128, 8, 3, 128, 8, 3}, {24000000, 32000, 2, 8, 1920, 128, 12, 2, 128, 12, 2}, {25000000, 32000, 2, 7, 8643, 128, 12, 2, 128, 12, 2}, /* 44.1k rate */ {12000000, 44100, 1, 7, 5264, 128, 8, 2, 128, 8, 2}, + {12000000, 44100, 1, 8, 4672, 128, 6, 3, 128, 6, 3}, {24000000, 44100, 2, 7, 5264, 128, 8, 2, 128, 8, 2}, {25000000, 44100, 2, 7, 2253, 128, 8, 2, 128, 8, 2}, /* 48k rate */ {12000000, 48000, 1, 8, 1920, 128, 8, 2, 128, 8, 2}, + {12000000, 48000, 1, 7, 6800, 96, 5, 4, 96, 5, 4}, {24000000, 48000, 2, 8, 1920, 128, 8, 2, 128, 8, 2}, {25000000, 48000, 2, 7, 8643, 128, 8, 2, 128, 8, 2}, /* 88.2k rate */ {12000000, 88200, 1, 7, 5264, 64, 8, 2, 64, 8, 2}, + {12000000, 88200, 1, 8, 4672, 64, 6, 3, 64, 6, 3}, {24000000, 88200, 2, 7, 5264, 64, 8, 2, 64, 8, 2}, {25000000, 88200, 2, 7, 2253, 64, 8, 2, 64, 8, 2}, /* 96k rate */ {12000000, 96000, 1, 8, 1920, 64, 8, 2, 64, 8, 2}, + {12000000, 96000, 1, 7, 6800, 48, 5, 4, 48, 5, 4}, {24000000, 96000, 2, 8, 1920, 64, 8, 2, 64, 8, 2}, {25000000, 96000, 2, 7, 8643, 64, 8, 2, 64, 8, 2}, /* 176.4k rate */ {12000000, 176400, 1, 7, 5264, 32, 8, 2, 32, 8, 2}, + {12000000, 176400, 1, 8, 4672, 32, 6, 3, 32, 6, 3}, {24000000, 176400, 2, 7, 5264, 32, 8, 2, 32, 8, 2}, {25000000, 176400, 2, 7, 2253, 32, 8, 2, 32, 8, 2}, /* 192k rate */ {12000000, 192000, 1, 8, 1920, 32, 8, 2, 32, 8, 2}, + {12000000, 192000, 1, 7, 6800, 24, 5, 4, 24, 5, 4}, {24000000, 192000, 2, 8, 1920, 32, 8, 2, 32, 8, 2}, {25000000, 192000, 2, 7, 8643, 32, 8, 2, 32, 8, 2}, }; @@ -680,7 +691,9 @@ static int aic31xx_setup_pll(struct snd_soc_codec *codec, struct snd_pcm_hw_params *params) { struct aic31xx_priv *aic31xx = snd_soc_codec_get_drvdata(codec); + int bclk_score = snd_soc_params_to_frame_size(params); int bclk_n = 0; + int match = -1; int i; /* Use PLL as CODEC_CLKIN and DAC_CLK as BDIV_CLKIN */ @@ -691,15 +704,37 @@ static int aic31xx_setup_pll(struct snd_soc_codec *codec, for (i = 0; i < ARRAY_SIZE(aic31xx_divs); i++) { if (aic31xx_divs[i].rate == params_rate(params) && - aic31xx_divs[i].mclk == aic31xx->sysclk) - break; + aic31xx_divs[i].mclk == aic31xx->sysclk) { + int s = (aic31xx_divs[i].dosr * aic31xx_divs[i].mdac) % + snd_soc_params_to_frame_size(params); + int bn = (aic31xx_divs[i].dosr * aic31xx_divs[i].mdac) / + snd_soc_params_to_frame_size(params); + if (s < bclk_score && bn > 0) { + match = i; + bclk_n = bn; + bclk_score = s; + } + } } - if (i == ARRAY_SIZE(aic31xx_divs)) { - dev_err(codec->dev, "%s: Sampling rate %u not supported\n", + if (match == -1) { + dev_err(codec->dev, + "%s: Sample rate (%u) and format not supported\n", __func__, params_rate(params)); + /* See bellow for details how fix this. */ return -EINVAL; } + if (bclk_score != 0) { + dev_warn(codec->dev, "Can not produce exact bitclock"); + /* This is fine if using dsp format, but if using i2s + there may be trouble. To fix the issue edit the + aic31xx_divs table for your mclk and sample + rate. Details can be found from: + http://www.ti.com/lit/ds/symlink/tlv320aic3100.pdf + Section: 5.6 CLOCK Generation and PLL + */ + } + i = match; /* PLL configuration */ snd_soc_update_bits(codec, AIC31XX_PLLPR, AIC31XX_PLL_MASK, @@ -729,14 +764,6 @@ static int aic31xx_setup_pll(struct snd_soc_codec *codec, snd_soc_write(codec, AIC31XX_AOSR, aic31xx_divs[i].aosr); /* Bit clock divider configuration. */ - bclk_n = (aic31xx_divs[i].dosr * aic31xx_divs[i].mdac) - / snd_soc_params_to_frame_size(params); - if (bclk_n == 0) { - dev_err(codec->dev, "%s: Not enough BLCK bandwidth\n", - __func__); - return -EINVAL; - } - snd_soc_update_bits(codec, AIC31XX_BCLKN, AIC31XX_PLL_MASK, bclk_n); -- cgit v1.2.3 From fe0a29e163a5d045c73faab682a8dac71c2f8012 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Thu, 4 Sep 2014 10:52:53 +0300 Subject: ASoC: davinci-mcasp: Correct rx format unit configuration In case of capture we should not use rotation. The reverse and mask is enough to get the data align correctly from the bus to MCU: Format data from bus after reverse (XRBUF) S16_LE: |LSB|MSB|xxx|xxx| |xxx|xxx|MSB|LSB| S24_3LE: |LSB|DAT|MSB|xxx| |xxx|MSB|DAT|LSB| S24_LE: |LSB|DAT|MSB|xxx| |xxx|MSB|DAT|LSB| S32_LE: |LSB|DAT|DAT|MSB| |MSB|DAT|DAT|LSB| With this patch all supported formats will work for playback and capture. Reported-by: Jyri Sarha (broken S24_3LE capture) Signed-off-by: Peter Ujfalusi Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/davinci/davinci-mcasp.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/sound/soc/davinci/davinci-mcasp.c b/sound/soc/davinci/davinci-mcasp.c index c28508da34cf..0062601a63c2 100644 --- a/sound/soc/davinci/davinci-mcasp.c +++ b/sound/soc/davinci/davinci-mcasp.c @@ -459,8 +459,17 @@ static int davinci_config_channel_size(struct davinci_mcasp *mcasp, { u32 fmt; u32 tx_rotate = (word_length / 4) & 0x7; - u32 rx_rotate = (32 - word_length) / 4; u32 mask = (1ULL << word_length) - 1; + /* + * For captured data we should not rotate, inversion and masking is + * enoguh to get the data to the right position: + * Format data from bus after reverse (XRBUF) + * S16_LE: |LSB|MSB|xxx|xxx| |xxx|xxx|MSB|LSB| + * S24_3LE: |LSB|DAT|MSB|xxx| |xxx|MSB|DAT|LSB| + * S24_LE: |LSB|DAT|MSB|xxx| |xxx|MSB|DAT|LSB| + * S32_LE: |LSB|DAT|DAT|MSB| |MSB|DAT|DAT|LSB| + */ + u32 rx_rotate = 0; /* * if s BCLK-to-LRCLK ratio has been configured via the set_clkdiv() -- cgit v1.2.3 From 1ba55f558cd3131bc1dedc84c53a8d254b55d9cf Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Thu, 31 Jul 2014 20:16:04 +0200 Subject: MAINTAINERS: Add Lucas Stach as co-maintainer for i.MX6 PCI driver Also drop Shawn Guo per his request. Signed-off-by: Lucas Stach Signed-off-by: Bjorn Helgaas Acked-by: Shawn Guo Acked-by: Richard Zhu Acked-by: Jingoo Han --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 1ff06dee651d..db665751099d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6870,7 +6870,7 @@ F: arch/x86/kernel/quirks.c PCI DRIVER FOR IMX6 M: Richard Zhu -M: Shawn Guo +M: Lucas Stach L: linux-pci@vger.kernel.org L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained -- cgit v1.2.3 From 3e3e406e3807235906ee0b7c697664ea6dfd88de Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Thu, 31 Jul 2014 20:16:05 +0200 Subject: PCI: imx6: Put LTSSM in "Detect" state before disabling it This fixes a boot hang observed when the bootloader already enabled the PCIe link for its own use. The fundamental problem is that Freescale forgot to wire up the core reset, so software doesn't have a sane way to get the core into a defined state. According to the DW PCIe core reference manual, configuration of the core may only happen when the LTSSM is disabled, so this is one of the first things we need to do. Apparently this isn't safe to do when the LTSSM is in any state other than "detect" as we observe an instant machine hang when trying to do so while the link is already up. As a workaround, force LTSSM into detect state right before hitting the disable switch. There is still a race window because the LTSSM may transition out of "detect" before we can disable it, but it's the best we can do for now. [bhelgaas: mention race window] Link: http://lkml.kernel.org/r/1406830565-23450-3-git-send-email-l.stach@pengutronix.de Reported-by: Fabio Estevam Signed-off-by: Lucas Stach Signed-off-by: Bjorn Helgaas Acked-by: Tim Harvey --- drivers/pci/host/pci-imx6.c | 38 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+) diff --git a/drivers/pci/host/pci-imx6.c b/drivers/pci/host/pci-imx6.c index a568efaa331c..35fc73a8d0b3 100644 --- a/drivers/pci/host/pci-imx6.c +++ b/drivers/pci/host/pci-imx6.c @@ -49,6 +49,9 @@ struct imx6_pcie { /* PCIe Port Logic registers (memory-mapped) */ #define PL_OFFSET 0x700 +#define PCIE_PL_PFLR (PL_OFFSET + 0x08) +#define PCIE_PL_PFLR_LINK_STATE_MASK (0x3f << 16) +#define PCIE_PL_PFLR_FORCE_LINK (1 << 15) #define PCIE_PHY_DEBUG_R0 (PL_OFFSET + 0x28) #define PCIE_PHY_DEBUG_R1 (PL_OFFSET + 0x2c) #define PCIE_PHY_DEBUG_R1_XMLH_LINK_IN_TRAINING (1 << 29) @@ -214,6 +217,32 @@ static int imx6q_pcie_abort_handler(unsigned long addr, static int imx6_pcie_assert_core_reset(struct pcie_port *pp) { struct imx6_pcie *imx6_pcie = to_imx6_pcie(pp); + u32 val, gpr1, gpr12; + + /* + * If the bootloader already enabled the link we need some special + * handling to get the core back into a state where it is safe to + * touch it for configuration. As there is no dedicated reset signal + * wired up for MX6QDL, we need to manually force LTSSM into "detect" + * state before completely disabling LTSSM, which is a prerequisite + * for core configuration. + * + * If both LTSSM_ENABLE and REF_SSP_ENABLE are active we have a strong + * indication that the bootloader activated the link. + */ + regmap_read(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1, &gpr1); + regmap_read(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, &gpr12); + + if ((gpr1 & IMX6Q_GPR1_PCIE_REF_CLK_EN) && + (gpr12 & IMX6Q_GPR12_PCIE_CTL_2)) { + val = readl(pp->dbi_base + PCIE_PL_PFLR); + val &= ~PCIE_PL_PFLR_LINK_STATE_MASK; + val |= PCIE_PL_PFLR_FORCE_LINK; + writel(val, pp->dbi_base + PCIE_PL_PFLR); + + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, + IMX6Q_GPR12_PCIE_CTL_2, 0 << 10); + } regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1, IMX6Q_GPR1_PCIE_TEST_PD, 1 << 18); @@ -589,6 +618,14 @@ static int __init imx6_pcie_probe(struct platform_device *pdev) return 0; } +static void imx6_pcie_shutdown(struct platform_device *pdev) +{ + struct imx6_pcie *imx6_pcie = platform_get_drvdata(pdev); + + /* bring down link, so bootloader gets clean state in case of reboot */ + imx6_pcie_assert_core_reset(&imx6_pcie->pp); +} + static const struct of_device_id imx6_pcie_of_match[] = { { .compatible = "fsl,imx6q-pcie", }, {}, @@ -601,6 +638,7 @@ static struct platform_driver imx6_pcie_driver = { .owner = THIS_MODULE, .of_match_table = imx6_pcie_of_match, }, + .shutdown = imx6_pcie_shutdown, }; /* Freescale PCIe driver does not allow module unload */ -- cgit v1.2.3 From 7d24c514e8e06c0a2d90f0735fdf8810016a6fea Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Fri, 22 Aug 2014 13:45:05 -0300 Subject: [media] Kconfig: do not select SPI bus on sub-driver auto-select We should not select SPI bus when sub-driver auto-select is selected. That option is meant for auto-selecting all possible ancillary drivers used for selected board driver. Ancillary drivers should define needed dependencies itself. I2C and I2C_MUX are still selected here for a reason described on commit 347f7a3763601d7b466898d1f10080b7083ac4a3 Reverts commit e4462ffc1602d9df21c00a0381dca9080474e27a Reported-by: Jeff Mahoney Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab --- drivers/media/Kconfig | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/media/Kconfig b/drivers/media/Kconfig index f60bad491eb6..3c89fcbc621e 100644 --- a/drivers/media/Kconfig +++ b/drivers/media/Kconfig @@ -182,7 +182,6 @@ config MEDIA_SUBDRV_AUTOSELECT depends on HAS_IOMEM select I2C select I2C_MUX - select SPI default y help By default, a media driver auto-selects all possible ancillary -- cgit v1.2.3 From 0df6580c5fc115034de29aa52af5cf6bd83d37d8 Mon Sep 17 00:00:00 2001 From: Bimow Chen Date: Mon, 4 Aug 2014 23:31:46 -0300 Subject: [media] af9033: update IT9135 tuner inittabs Update IT9135 BX tuner config 60 and 61 inittabs. [crope@iki.fi: removed two reg writes from driver init itself] Cc: # v3.15+ Signed-off-by: Bimow Chen Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb-frontends/af9033_priv.h | 20 +++++++++----------- 1 file changed, 9 insertions(+), 11 deletions(-) diff --git a/drivers/media/dvb-frontends/af9033_priv.h b/drivers/media/dvb-frontends/af9033_priv.h index fc2ad581e302..ded7b67d7526 100644 --- a/drivers/media/dvb-frontends/af9033_priv.h +++ b/drivers/media/dvb-frontends/af9033_priv.h @@ -1418,7 +1418,7 @@ static const struct reg_val tuner_init_it9135_60[] = { { 0x800068, 0x0a }, { 0x80006a, 0x03 }, { 0x800070, 0x0a }, - { 0x800071, 0x05 }, + { 0x800071, 0x0a }, { 0x800072, 0x02 }, { 0x800075, 0x8c }, { 0x800076, 0x8c }, @@ -1484,7 +1484,6 @@ static const struct reg_val tuner_init_it9135_60[] = { { 0x800104, 0x02 }, { 0x800105, 0xbe }, { 0x800106, 0x00 }, - { 0x800109, 0x02 }, { 0x800115, 0x0a }, { 0x800116, 0x03 }, { 0x80011a, 0xbe }, @@ -1510,7 +1509,6 @@ static const struct reg_val tuner_init_it9135_60[] = { { 0x80014b, 0x8c }, { 0x80014d, 0xac }, { 0x80014e, 0xc6 }, - { 0x80014f, 0x03 }, { 0x800151, 0x1e }, { 0x800153, 0xbc }, { 0x800178, 0x09 }, @@ -1522,9 +1520,10 @@ static const struct reg_val tuner_init_it9135_60[] = { { 0x80018d, 0x5f }, { 0x80018f, 0xa0 }, { 0x800190, 0x5a }, - { 0x80ed02, 0xff }, - { 0x80ee42, 0xff }, - { 0x80ee82, 0xff }, + { 0x800191, 0x00 }, + { 0x80ed02, 0x40 }, + { 0x80ee42, 0x40 }, + { 0x80ee82, 0x40 }, { 0x80f000, 0x0f }, { 0x80f01f, 0x8c }, { 0x80f020, 0x00 }, @@ -1699,7 +1698,6 @@ static const struct reg_val tuner_init_it9135_61[] = { { 0x800104, 0x02 }, { 0x800105, 0xc8 }, { 0x800106, 0x00 }, - { 0x800109, 0x02 }, { 0x800115, 0x0a }, { 0x800116, 0x03 }, { 0x80011a, 0xc6 }, @@ -1725,7 +1723,6 @@ static const struct reg_val tuner_init_it9135_61[] = { { 0x80014b, 0x8c }, { 0x80014d, 0xa8 }, { 0x80014e, 0xc6 }, - { 0x80014f, 0x03 }, { 0x800151, 0x28 }, { 0x800153, 0xcc }, { 0x800178, 0x09 }, @@ -1737,9 +1734,10 @@ static const struct reg_val tuner_init_it9135_61[] = { { 0x80018d, 0x5f }, { 0x80018f, 0xfb }, { 0x800190, 0x5c }, - { 0x80ed02, 0xff }, - { 0x80ee42, 0xff }, - { 0x80ee82, 0xff }, + { 0x800191, 0x00 }, + { 0x80ed02, 0x40 }, + { 0x80ee42, 0x40 }, + { 0x80ee82, 0x40 }, { 0x80f000, 0x0f }, { 0x80f01f, 0x8c }, { 0x80f020, 0x00 }, -- cgit v1.2.3 From 01b461bbe74b89da8941f4c95711777d87b9172e Mon Sep 17 00:00:00 2001 From: Bimow Chen Date: Tue, 5 Aug 2014 00:14:47 -0300 Subject: [media] it913x: init tuner on attach That register is needed to program very first in order to operate correctly. [crope@iki.fi: returned sequence back, removed sleep, moved reg write earlier to prevent populating tuner ops in case of failure] Cc: # v3.15+ Signed-off-by: Bimow Chen Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab --- drivers/media/tuners/tuner_it913x.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/media/tuners/tuner_it913x.c b/drivers/media/tuners/tuner_it913x.c index 6f30d7e535b8..3d83c425bccf 100644 --- a/drivers/media/tuners/tuner_it913x.c +++ b/drivers/media/tuners/tuner_it913x.c @@ -396,6 +396,7 @@ struct dvb_frontend *it913x_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c_adap, u8 i2c_addr, u8 config) { struct it913x_state *state = NULL; + int ret; /* allocate memory for the internal state */ state = kzalloc(sizeof(struct it913x_state), GFP_KERNEL); @@ -425,6 +426,11 @@ struct dvb_frontend *it913x_attach(struct dvb_frontend *fe, state->tuner_type = config; state->firmware_ver = 1; + /* tuner RF initial */ + ret = it913x_wr_reg(state, PRO_DMOD, 0xec4c, 0x68); + if (ret < 0) + goto error; + fe->tuner_priv = state; memcpy(&fe->ops.tuner_ops, &it913x_tuner_ops, sizeof(struct dvb_tuner_ops)); -- cgit v1.2.3 From 9dc0f3fe3fe6b83b44e5920a0b143b4f96755b59 Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Sat, 9 Aug 2014 01:03:14 -0300 Subject: [media] af9033: feed clock to RF tuner IT9135 RF tuner clock is coming from demodulator. We need enable it early in demod init, before any tuner I/O. Currently it is enabled by tuner driver itself, but it is too late and performance will be reduced as some registers are not updated correctly. Clock is disabled automatically when demod is put onto sleep. Cc: # v3.15+ Cc: Bimow Chen Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb-frontends/af9033.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/media/dvb-frontends/af9033.c b/drivers/media/dvb-frontends/af9033.c index be4bec2a9640..5c90ea683a7e 100644 --- a/drivers/media/dvb-frontends/af9033.c +++ b/drivers/media/dvb-frontends/af9033.c @@ -314,6 +314,19 @@ static int af9033_init(struct dvb_frontend *fe) goto err; } + /* feed clock to RF tuner */ + switch (state->cfg.tuner) { + case AF9033_TUNER_IT9135_38: + case AF9033_TUNER_IT9135_51: + case AF9033_TUNER_IT9135_52: + case AF9033_TUNER_IT9135_60: + case AF9033_TUNER_IT9135_61: + case AF9033_TUNER_IT9135_62: + ret = af9033_wr_reg(state, 0x80fba8, 0x00); + if (ret < 0) + goto err; + } + /* settings for TS interface */ if (state->cfg.ts_mode == AF9033_TS_MODE_USB) { ret = af9033_wr_reg_mask(state, 0x80f9a5, 0x00, 0x01); -- cgit v1.2.3 From a04646c045cab08a9e62b9be8f01ecbb0632d24e Mon Sep 17 00:00:00 2001 From: Malcolm Priestley Date: Tue, 5 Aug 2014 06:19:16 -0300 Subject: [media] af9035: new IDs: add support for PCTV 78e and PCTV 79e add the following IDs USB_PID_PCTV_78E (0x025a) for PCTV 78e USB_PID_PCTV_79E (0x0262) for PCTV 79e For these it9135 devices. Signed-off-by: Malcolm Priestley Cc: Antti Palosaari Cc: # v3.14+ Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb-core/dvb-usb-ids.h | 2 ++ drivers/media/usb/dvb-usb-v2/af9035.c | 4 ++++ 2 files changed, 6 insertions(+) diff --git a/drivers/media/dvb-core/dvb-usb-ids.h b/drivers/media/dvb-core/dvb-usb-ids.h index 5135a096bfa6..12ce19c98ded 100644 --- a/drivers/media/dvb-core/dvb-usb-ids.h +++ b/drivers/media/dvb-core/dvb-usb-ids.h @@ -280,6 +280,8 @@ #define USB_PID_PCTV_400E 0x020f #define USB_PID_PCTV_450E 0x0222 #define USB_PID_PCTV_452E 0x021f +#define USB_PID_PCTV_78E 0x025a +#define USB_PID_PCTV_79E 0x0262 #define USB_PID_REALTEK_RTL2831U 0x2831 #define USB_PID_REALTEK_RTL2832U 0x2832 #define USB_PID_TECHNOTREND_CONNECT_S2_3600 0x3007 diff --git a/drivers/media/usb/dvb-usb-v2/af9035.c b/drivers/media/usb/dvb-usb-v2/af9035.c index 75ec1c659fdd..c82beac0e0cb 100644 --- a/drivers/media/usb/dvb-usb-v2/af9035.c +++ b/drivers/media/usb/dvb-usb-v2/af9035.c @@ -1575,6 +1575,10 @@ static const struct usb_device_id af9035_id_table[] = { &af9035_props, "Leadtek WinFast DTV Dongle Dual", NULL) }, { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xf900, &af9035_props, "Hauppauge WinTV-MiniStick 2", NULL) }, + { DVB_USB_DEVICE(USB_VID_PCTV, USB_PID_PCTV_78E, + &af9035_props, "PCTV 78e", RC_MAP_IT913X_V1) }, + { DVB_USB_DEVICE(USB_VID_PCTV, USB_PID_PCTV_79E, + &af9035_props, "PCTV 79e", RC_MAP_IT913X_V2) }, { } }; MODULE_DEVICE_TABLE(usb, af9035_id_table); -- cgit v1.2.3 From f2a08b404691ef3e7be6ce81c185335cfc68b6db Mon Sep 17 00:00:00 2001 From: Qipan Li Date: Tue, 2 Sep 2014 17:01:03 +0800 Subject: spi: sirf: enable RX_IO_DMA_INT interrupt in spi interrupt handler, we need check RX_IO_DMA status to ensure rx fifo have received the specify count data. if not set, the while statement in spi isr function will keep loop, at last, make the kernel hang. [The code is actually there in the interrupt handler but apparently it needs the interrupt unmasking so the handler sees the status -- broonie] Signed-off-by: Qipan Li Signed-off-by: Barry Song Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- drivers/spi/spi-sirf.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/spi/spi-sirf.c b/drivers/spi/spi-sirf.c index 95ac276eaafe..1a5161336730 100644 --- a/drivers/spi/spi-sirf.c +++ b/drivers/spi/spi-sirf.c @@ -438,7 +438,8 @@ static void spi_sirfsoc_pio_transfer(struct spi_device *spi, sspi->tx_word(sspi); writel(SIRFSOC_SPI_TXFIFO_EMPTY_INT_EN | SIRFSOC_SPI_TX_UFLOW_INT_EN | - SIRFSOC_SPI_RX_OFLOW_INT_EN, + SIRFSOC_SPI_RX_OFLOW_INT_EN | + SIRFSOC_SPI_RX_IO_DMA_INT_EN, sspi->base + SIRFSOC_SPI_INT_EN); writel(SIRFSOC_SPI_RX_EN | SIRFSOC_SPI_TX_EN, sspi->base + SIRFSOC_SPI_TX_RX_EN); -- cgit v1.2.3 From 810a58b0256b24f194dda5ca1e705204ca703f7b Mon Sep 17 00:00:00 2001 From: Qipan Li Date: Tue, 2 Sep 2014 17:02:34 +0800 Subject: spi: sirf: add fifo reset/start for cmd transfer for command mode spi transfer, HW spec requires to do fifo reset work to clear FIFO status. Signed-off-by: Qipan Li Signed-off-by: Barry Song Signed-off-by: Mark Brown --- drivers/spi/spi-sirf.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/spi/spi-sirf.c b/drivers/spi/spi-sirf.c index 1a5161336730..6f0602fd7401 100644 --- a/drivers/spi/spi-sirf.c +++ b/drivers/spi/spi-sirf.c @@ -312,6 +312,8 @@ static int spi_sirfsoc_cmd_transfer(struct spi_device *spi, u32 cmd; sspi = spi_master_get_devdata(spi->master); + writel(SIRFSOC_SPI_FIFO_RESET, sspi->base + SIRFSOC_SPI_TXFIFO_OP); + writel(SIRFSOC_SPI_FIFO_START, sspi->base + SIRFSOC_SPI_TXFIFO_OP); memcpy(&cmd, sspi->tx, t->len); if (sspi->word_width == 1 && !(spi->mode & SPI_LSB_FIRST)) cmd = cpu_to_be32(cmd) >> -- cgit v1.2.3 From 64bc0110f1ec905b1676b5ef60c1cc5b1799e1b6 Mon Sep 17 00:00:00 2001 From: Doug Anderson Date: Wed, 3 Sep 2014 13:44:25 -0700 Subject: spi/rockchip: Fix the wait_for_idle() timeout The wait_for_idle() could get unlucky and timeout too quickly. Specifically, the old calculation was effectively: timeout = jiffies + 1; if (jiffies >= timeout) print warning; From the above it should be obvious that if jiffies ticks in just the wrong place then we'll have an effective timeout of 0. Fix this by effectively changing the above ">=" to a ">". That gives us an extra jiffy to finish. Signed-off-by: Doug Anderson Signed-off-by: Mark Brown --- drivers/spi/spi-rockchip.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/spi/spi-rockchip.c b/drivers/spi/spi-rockchip.c index c0743604b906..2a31bc2d3fd3 100644 --- a/drivers/spi/spi-rockchip.c +++ b/drivers/spi/spi-rockchip.c @@ -220,7 +220,7 @@ static inline void wait_for_idle(struct rockchip_spi *rs) do { if (!(readl_relaxed(rs->regs + ROCKCHIP_SPI_SR) & SR_BUSY)) return; - } while (time_before(jiffies, timeout)); + } while (!time_after(jiffies, timeout)); dev_warn(rs->dev, "spi controller is in busy state!\n"); } -- cgit v1.2.3 From 62946172c81578477fcbb26478aebaa31353488d Mon Sep 17 00:00:00 2001 From: Doug Anderson Date: Wed, 3 Sep 2014 13:44:26 -0700 Subject: spi/rockchip: Don't warn if SPI is busy but disabled The reference manual from Rockchip claims this about the BSF (SPI Busy Flag): * 0 - SPI is idle or disabled * 1 - SPI is actively transferring data The above doesn't quite appear to be true. Specifically I found the busy bit set when SPI was disabled. Let's change the WARN_ON() so we only check the busy bit if the controller was enabled. Signed-off-by: Doug Anderson Signed-off-by: Mark Brown --- drivers/spi/spi-rockchip.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/spi/spi-rockchip.c b/drivers/spi/spi-rockchip.c index 2a31bc2d3fd3..514f8e73b8e1 100644 --- a/drivers/spi/spi-rockchip.c +++ b/drivers/spi/spi-rockchip.c @@ -529,7 +529,8 @@ static int rockchip_spi_transfer_one( int ret = 0; struct rockchip_spi *rs = spi_master_get_devdata(master); - WARN_ON((readl_relaxed(rs->regs + ROCKCHIP_SPI_SR) & SR_BUSY)); + WARN_ON(readl_relaxed(rs->regs + ROCKCHIP_SPI_SSIENR) && + (readl_relaxed(rs->regs + ROCKCHIP_SPI_SR) & SR_BUSY)); if (!xfer->tx_buf && !xfer->rx_buf) { dev_err(rs->dev, "No buffer for transfer\n"); -- cgit v1.2.3 From 6e3be9bbeaa841eb65fa7570e0c542b2c1483fca Mon Sep 17 00:00:00 2001 From: Doug Anderson Date: Wed, 3 Sep 2014 13:44:27 -0700 Subject: spi/rockchip: Mark DMA as optional The Rockchip SPI controller works fine without DMA (aside from a few warnings). The DMA property even implies this, saying: DMA request names should include "tx" and "rx" if present. Officially mark the properties as optional. Signed-off-by: Doug Anderson Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/spi/spi-rockchip.txt | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/spi/spi-rockchip.txt b/Documentation/devicetree/bindings/spi/spi-rockchip.txt index 7bab35575817..467dec441c62 100644 --- a/Documentation/devicetree/bindings/spi/spi-rockchip.txt +++ b/Documentation/devicetree/bindings/spi/spi-rockchip.txt @@ -16,11 +16,15 @@ Required Properties: - clocks: Must contain an entry for each entry in clock-names. - clock-names: Shall be "spiclk" for the transfer-clock, and "apb_pclk" for the peripheral clock. +- #address-cells: should be 1. +- #size-cells: should be 0. + +Optional Properties: + - dmas: DMA specifiers for tx and rx dma. See the DMA client binding, Documentation/devicetree/bindings/dma/dma.txt - dma-names: DMA request names should include "tx" and "rx" if present. -- #address-cells: should be 1. -- #size-cells: should be 0. + Example: -- cgit v1.2.3 From fb38ab4cd05e11184fd2c3ef916fa106ecc505fc Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Fri, 5 Sep 2014 15:52:28 +0800 Subject: crypto: drbg - backport "fix maximum value checks on 32 bit systems" This is a backport of commit b9347aff91ce4789619168539f08202d8d6a1177. This backport is needed as without it the code will crash on 32-bit systems. The maximum values for additional input string or generated blocks is larger than 1<<32. To ensure a sensible value on 32 bit systems, return SIZE_MAX on 32 bit systems. This value is lower than the maximum allowed values defined in SP800-90A. The standard allow lower maximum values, but not larger values. SIZE_MAX - 1 is used for drbg_max_addtl to allow drbg_healthcheck_sanity to check the enforcement of the variable without wrapping. Reported-by: Stephen Rothwell Reported-by: kbuild test robot Signed-off-by: Herbert Xu --- include/crypto/drbg.h | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/include/crypto/drbg.h b/include/crypto/drbg.h index 831d786976c5..882675e7c055 100644 --- a/include/crypto/drbg.h +++ b/include/crypto/drbg.h @@ -162,12 +162,25 @@ static inline size_t drbg_max_request_bytes(struct drbg_state *drbg) static inline size_t drbg_max_addtl(struct drbg_state *drbg) { +#if (__BITS_PER_LONG == 32) + /* + * SP800-90A allows smaller maximum numbers to be returned -- we + * return SIZE_MAX - 1 to allow the verification of the enforcement + * of this value in drbg_healthcheck_sanity. + */ + return (SIZE_MAX - 1); +#else return (1UL<<(drbg->core->max_addtllen)); +#endif } static inline size_t drbg_max_requests(struct drbg_state *drbg) { +#if (__BITS_PER_LONG == 32) + return SIZE_MAX; +#else return (1UL<<(drbg->core->max_req)); +#endif } /* -- cgit v1.2.3 From 78f543a93473f67a1035949a293b79288e259b6e Mon Sep 17 00:00:00 2001 From: Stephan Mueller Date: Mon, 1 Sep 2014 07:11:20 +0200 Subject: crypto: drbg - remove check for uninitialized DRBG handle The drbg_healthcheck() contained a test to call the DRBG with an uninitialized DRBG cipher handle. As this is an inappropriate use of the kernel crypto API to try to generate random numbers before initialization, checks verifying for an initialized DRBG have been removed in previous patches. Now, the drbg_healthcheck test must also be removed. Changes V2: Added patch marker to email subject line. Signed-off-by: Stephan Mueller Signed-off-by: Herbert Xu --- crypto/drbg.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/crypto/drbg.c b/crypto/drbg.c index 7894db9ca90b..a53ee099e281 100644 --- a/crypto/drbg.c +++ b/crypto/drbg.c @@ -1922,9 +1922,6 @@ static inline int __init drbg_healthcheck_sanity(void) /* overflow max addtllen with personalization string */ ret = drbg_instantiate(drbg, &addtl, coreref, pr); BUG_ON(0 == ret); - /* test uninstantated DRBG */ - len = drbg_generate(drbg, buf, (max_request_bytes + 1), NULL); - BUG_ON(0 < len); /* all tests passed */ rc = 0; -- cgit v1.2.3 From 9a302c32f363e420b6aa6e42c0cd686a495771f6 Mon Sep 17 00:00:00 2001 From: Rajeev Kumar Date: Fri, 5 Sep 2014 16:47:04 +0530 Subject: ASoC: dwc: Update email id of the author I moved from ST Microelectronics and the email-id no longer exists. Update email-id to personal one, Signed-off-by: Rajeev Kumar Signed-off-by: Mark Brown --- sound/soc/dwc/designware_i2s.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/dwc/designware_i2s.c b/sound/soc/dwc/designware_i2s.c index 25c31f1655f6..a97d27f4d19c 100644 --- a/sound/soc/dwc/designware_i2s.c +++ b/sound/soc/dwc/designware_i2s.c @@ -4,7 +4,7 @@ * sound/soc/dwc/designware_i2s.c * * Copyright (C) 2010 ST Microelectronics - * Rajeev Kumar + * Rajeev Kumar * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any -- cgit v1.2.3 From ffff7a12ace24c54220631b79abb02ab65780b5a Mon Sep 17 00:00:00 2001 From: Markus Pargmann Date: Mon, 8 Sep 2014 08:43:37 +0200 Subject: regmap: Fix debugfs-file 'registers' mode The macro "REGMAP_ALLOW_WRITE_DEBUGFS" can be used to enable write support on the registers file in the debugfs. The mode of the file is fixed to 0400 so it is not possible to write the file ever. This patch fixes the mode by setting it to the correct value depending on the macro. Signed-off-by: Markus Pargmann Signed-off-by: Mark Brown --- drivers/base/regmap/regmap-debugfs.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/base/regmap/regmap-debugfs.c b/drivers/base/regmap/regmap-debugfs.c index 45d812c0ea77..9c9255142079 100644 --- a/drivers/base/regmap/regmap-debugfs.c +++ b/drivers/base/regmap/regmap-debugfs.c @@ -512,7 +512,14 @@ void regmap_debugfs_init(struct regmap *map, const char *name) map, ®map_reg_ranges_fops); if (map->max_register || regmap_readable(map, 0)) { - debugfs_create_file("registers", 0400, map->debugfs, + umode_t registers_mode; + + if (IS_ENABLED(REGMAP_ALLOW_WRITE_DEBUGFS)) + registers_mode = 0600; + else + registers_mode = 0400; + + debugfs_create_file("registers", registers_mode, map->debugfs, map, ®map_map_fops); debugfs_create_file("access", 0400, map->debugfs, map, ®map_access_fops); -- cgit v1.2.3 From 8a5a5d1530d55e367ef29c80946d0274717617bb Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Sun, 7 Sep 2014 20:30:29 +0200 Subject: x86-64, ptdump: Mark espfix area only if existent We should classify the espfix area as such only if we actually have enabled the corresponding option. Otherwise the page table dump might look confusing. Signed-off-by: Mathias Krause Link: http://lkml.kernel.org/r/1410114629-24523-1-git-send-email-minipli@googlemail.com Cc: Arjan van de Ven Cc: H. Peter Anvin Signed-off-by: H. Peter Anvin --- arch/x86/mm/dump_pagetables.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/x86/mm/dump_pagetables.c b/arch/x86/mm/dump_pagetables.c index 167ffcac16ed..95a427e57887 100644 --- a/arch/x86/mm/dump_pagetables.c +++ b/arch/x86/mm/dump_pagetables.c @@ -48,7 +48,9 @@ enum address_markers_idx { LOW_KERNEL_NR, VMALLOC_START_NR, VMEMMAP_START_NR, +# ifdef CONFIG_X86_ESPFIX64 ESPFIX_START_NR, +# endif HIGH_KERNEL_NR, MODULES_VADDR_NR, MODULES_END_NR, @@ -71,7 +73,9 @@ static struct addr_marker address_markers[] = { { PAGE_OFFSET, "Low Kernel Mapping" }, { VMALLOC_START, "vmalloc() Area" }, { VMEMMAP_START, "Vmemmap" }, +# ifdef CONFIG_X86_ESPFIX64 { ESPFIX_BASE_ADDR, "ESPfix Area", 16 }, +# endif { __START_KERNEL_map, "High Kernel Mapping" }, { MODULES_VADDR, "Modules" }, { MODULES_END, "End Modules" }, -- cgit v1.2.3 From 47226ad4f4cfd1e91ded7f2ec42f83ff1c624663 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Wed, 3 Sep 2014 21:50:07 -0700 Subject: x86/efi: Only load initrd above 4g on second try MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Mantas found that after commit 4bf7111f5016 ("x86/efi: Support initrd loaded above 4G"), the kernel freezes at the earliest possible moment when trying to boot via UEFI on Asus laptop. Revert to old way to load initrd under 4G on first try, second try will use above 4G buffer when initrd is too big and does not fit under 4G. [ The cause of the freeze appears to be a firmware bug when reading file data into buffers above 4GB, though the exact reason is unknown. Mantas reports that the hang can be avoid if the file size is a multiple of 512 bytes, but I've seen some ASUS firmware simply corrupting the file data rather than freezing. Laszlo fixed an issue in the upstream EDK2 DiskIO code in Aug 2013 which may possibly be related, commit 4e39b75e ("MdeModulePkg/DiskIoDxe: fix source/destination pointer of overrun transfer"). Whatever the cause, it's unlikely that a fix will be forthcoming from the vendor, hence the workaround - Matt ] Cc: Laszlo Ersek Reported-by: Mantas Mikulėnas Reported-by: Harald Hoyer Tested-by: Anders Darander Tested-by: Calvin Walton Signed-off-by: Yinghai Lu Signed-off-by: Matt Fleming --- arch/x86/boot/compressed/eboot.c | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) diff --git a/arch/x86/boot/compressed/eboot.c b/arch/x86/boot/compressed/eboot.c index f277184e2ac1..dca9842d8f91 100644 --- a/arch/x86/boot/compressed/eboot.c +++ b/arch/x86/boot/compressed/eboot.c @@ -1032,7 +1032,6 @@ struct boot_params *make_boot_params(struct efi_config *c) int i; unsigned long ramdisk_addr; unsigned long ramdisk_size; - unsigned long initrd_addr_max; efi_early = c; sys_table = (efi_system_table_t *)(unsigned long)efi_early->table; @@ -1095,15 +1094,20 @@ struct boot_params *make_boot_params(struct efi_config *c) memset(sdt, 0, sizeof(*sdt)); - if (hdr->xloadflags & XLF_CAN_BE_LOADED_ABOVE_4G) - initrd_addr_max = -1UL; - else - initrd_addr_max = hdr->initrd_addr_max; - status = handle_cmdline_files(sys_table, image, (char *)(unsigned long)hdr->cmd_line_ptr, - "initrd=", initrd_addr_max, + "initrd=", hdr->initrd_addr_max, &ramdisk_addr, &ramdisk_size); + + if (status != EFI_SUCCESS && + hdr->xloadflags & XLF_CAN_BE_LOADED_ABOVE_4G) { + efi_printk(sys_table, "Trying to load files to higher address\n"); + status = handle_cmdline_files(sys_table, image, + (char *)(unsigned long)hdr->cmd_line_ptr, + "initrd=", -1UL, + &ramdisk_addr, &ramdisk_size); + } + if (status != EFI_SUCCESS) goto fail2; hdr->ramdisk_image = ramdisk_addr & 0xffffffff; -- cgit v1.2.3 From 9cb0e394234d244fe5a97e743ec9dd7ddff7e64b Mon Sep 17 00:00:00 2001 From: Matt Fleming Date: Fri, 5 Sep 2014 14:52:26 +0100 Subject: x86/efi: Fixup GOT in all boot code paths Maarten reported that his Macbook pro 8.2 stopped booting after commit f23cf8bd5c1f49 ("efi/x86: efistub: Move shared dependencies to "), the main feature of which is changing the visibility of symbol 'efi_early' from local to global. By making 'efi_early' global we end up requiring an entry in the Global Offset Table. Unfortunately, while we do include code to fixup GOT entries in the early boot code, it's only called after we've executed the EFI boot stub. What this amounts to is that references to 'efi_early' in the EFI boot stub don't point to the correct place. Since we've got multiple boot entry points we need to be prepared to fixup the GOT in multiple places, while ensuring that we never do it more than once, otherwise the GOT entries will still point to the wrong place. Reported-by: Maarten Lankhorst Tested-by: Maarten Lankhorst Cc: Ard Biesheuvel Signed-off-by: Matt Fleming --- arch/x86/boot/compressed/head_32.S | 54 ++++++++++++++++++++++++++---------- arch/x86/boot/compressed/head_64.S | 56 ++++++++++++++++++++++++++++---------- 2 files changed, 81 insertions(+), 29 deletions(-) diff --git a/arch/x86/boot/compressed/head_32.S b/arch/x86/boot/compressed/head_32.S index cbed1407a5cd..d6b8aa4c986c 100644 --- a/arch/x86/boot/compressed/head_32.S +++ b/arch/x86/boot/compressed/head_32.S @@ -30,6 +30,33 @@ #include #include +/* + * Adjust our own GOT + * + * The relocation base must be in %ebx + * + * It is safe to call this macro more than once, because in some of the + * code paths multiple invocations are inevitable, e.g. via the efi* + * entry points. + * + * Relocation is only performed the first time. + */ +.macro FIXUP_GOT + cmpb $1, got_fixed(%ebx) + je 2f + + leal _got(%ebx), %edx + leal _egot(%ebx), %ecx +1: + cmpl %ecx, %edx + jae 2f + addl %ebx, (%edx) + addl $4, %edx + jmp 1b +2: + movb $1, got_fixed(%ebx) +.endm + __HEAD ENTRY(startup_32) #ifdef CONFIG_EFI_STUB @@ -56,6 +83,9 @@ ENTRY(efi_pe_entry) add %esi, 88(%eax) pushl %eax + movl %esi, %ebx + FIXUP_GOT + call make_boot_params cmpl $0, %eax je fail @@ -81,6 +111,10 @@ ENTRY(efi32_stub_entry) leal efi32_config(%esi), %eax add %esi, 88(%eax) pushl %eax + + movl %esi, %ebx + FIXUP_GOT + 2: call efi_main cmpl $0, %eax @@ -190,19 +224,7 @@ relocated: shrl $2, %ecx rep stosl -/* - * Adjust our own GOT - */ - leal _got(%ebx), %edx - leal _egot(%ebx), %ecx -1: - cmpl %ecx, %edx - jae 2f - addl %ebx, (%edx) - addl $4, %edx - jmp 1b -2: - + FIXUP_GOT /* * Do the decompression, and jump to the new kernel.. */ @@ -225,8 +247,12 @@ relocated: xorl %ebx, %ebx jmp *%eax -#ifdef CONFIG_EFI_STUB .data +/* Have we relocated the GOT? */ +got_fixed: + .byte 0 + +#ifdef CONFIG_EFI_STUB efi32_config: .fill 11,8,0 .long efi_call_phys diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S index 2884e0c3e8a5..50f69c7eaaf4 100644 --- a/arch/x86/boot/compressed/head_64.S +++ b/arch/x86/boot/compressed/head_64.S @@ -32,6 +32,33 @@ #include #include +/* + * Adjust our own GOT + * + * The relocation base must be in %rbx + * + * It is safe to call this macro more than once, because in some of the + * code paths multiple invocations are inevitable, e.g. via the efi* + * entry points. + * + * Relocation is only performed the first time. + */ +.macro FIXUP_GOT + cmpb $1, got_fixed(%rip) + je 2f + + leaq _got(%rip), %rdx + leaq _egot(%rip), %rcx +1: + cmpq %rcx, %rdx + jae 2f + addq %rbx, (%rdx) + addq $8, %rdx + jmp 1b +2: + movb $1, got_fixed(%rip) +.endm + __HEAD .code32 ENTRY(startup_32) @@ -252,10 +279,13 @@ ENTRY(efi_pe_entry) subq $1b, %rbp /* - * Relocate efi_config->call(). + * Relocate efi_config->call() and the GOT entries. */ addq %rbp, efi64_config+88(%rip) + movq %rbp, %rbx + FIXUP_GOT + movq %rax, %rdi call make_boot_params cmpq $0,%rax @@ -271,10 +301,13 @@ handover_entry: subq $1b, %rbp /* - * Relocate efi_config->call(). + * Relocate efi_config->call() and the GOT entries. */ movq efi_config(%rip), %rax addq %rbp, 88(%rax) + + movq %rbp, %rbx + FIXUP_GOT 2: movq efi_config(%rip), %rdi call efi_main @@ -385,19 +418,8 @@ relocated: shrq $3, %rcx rep stosq -/* - * Adjust our own GOT - */ - leaq _got(%rip), %rdx - leaq _egot(%rip), %rcx -1: - cmpq %rcx, %rdx - jae 2f - addq %rbx, (%rdx) - addq $8, %rdx - jmp 1b -2: - + FIXUP_GOT + /* * Do the decompression, and jump to the new kernel.. */ @@ -437,6 +459,10 @@ gdt: .quad 0x0000000000000000 /* TS continued */ gdt_end: +/* Have we relocated the GOT? */ +got_fixed: + .byte 0 + #ifdef CONFIG_EFI_STUB efi_config: .quad 0 -- cgit v1.2.3 From 3577af70a2ce4853d58e57d832e687d739281479 Mon Sep 17 00:00:00 2001 From: Cong Wang Date: Tue, 2 Sep 2014 15:27:20 -0700 Subject: perf: Fix a race condition in perf_remove_from_context() We saw a kernel soft lockup in perf_remove_from_context(), it looks like the `perf` process, when exiting, could not go out of the retry loop. Meanwhile, the target process was forking a child. So either the target process should execute the smp function call to deactive the event (if it was running) or it should do a context switch which deactives the event. It seems we optimize out a context switch in perf_event_context_sched_out(), and what's more important, we still test an obsolete task pointer when retrying, so no one actually would deactive that event in this situation. Fix it directly by reloading the task pointer in perf_remove_from_context(). This should cure the above soft lockup. Signed-off-by: Cong Wang Signed-off-by: Cong Wang Signed-off-by: Peter Zijlstra Cc: Paul Mackerras Cc: Arnaldo Carvalho de Melo Cc: Linus Torvalds Cc: Link: http://lkml.kernel.org/r/1409696840-843-1-git-send-email-xiyou.wangcong@gmail.com Signed-off-by: Ingo Molnar --- kernel/events/core.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/kernel/events/core.c b/kernel/events/core.c index f9c1ed002dbc..d640a8b4dcbc 100644 --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -1524,6 +1524,11 @@ retry: */ if (ctx->is_active) { raw_spin_unlock_irq(&ctx->lock); + /* + * Reload the task pointer, it might have been changed by + * a concurrent perf_event_context_sched_out(). + */ + task = ctx->task; goto retry; } @@ -1967,6 +1972,11 @@ retry: */ if (ctx->is_active) { raw_spin_unlock_irq(&ctx->lock); + /* + * Reload the task pointer, it might have been changed by + * a concurrent perf_event_context_sched_out(). + */ + task = ctx->task; goto retry; } -- cgit v1.2.3 From cc99535eb4049c730cac421d403d079593cb31ae Mon Sep 17 00:00:00 2001 From: Jan-Simon Möller Date: Fri, 5 Sep 2014 16:16:45 -0700 Subject: x86/mm: Apply the section attribute to the variable, not its type MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This fixes a compilation error in clang in that a linker section attribute can't be added to a type: arch/x86/mm/mmap.c:34:8: error: '__section__' attribute only applies to functions and global variables struct __read_mostly ... By moving the section attribute to the variable declaration, the desired effect is achieved. Signed-off-by: Jan-Simon Möller Signed-off-by: Behan Webster Cc: Linus Torvalds Cc: Andrew Morton Link: http://lkml.kernel.org/r/1409959005-11479-1-git-send-email-behanw@converseincode.com Signed-off-by: Ingo Molnar --- arch/x86/mm/mmap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/mm/mmap.c b/arch/x86/mm/mmap.c index 25e7e1372bb2..919b91205cd4 100644 --- a/arch/x86/mm/mmap.c +++ b/arch/x86/mm/mmap.c @@ -31,7 +31,7 @@ #include #include -struct __read_mostly va_alignment va_align = { +struct va_alignment __read_mostly va_align = { .flags = -1, }; -- cgit v1.2.3 From 0ceac9e094b065fe3fec19669740f338d3480498 Mon Sep 17 00:00:00 2001 From: Mark Salter Date: Mon, 8 Sep 2014 13:01:08 -0400 Subject: efi/arm64: Fix fdt-related memory reservation Commit 86c8b27a01cf: "arm64: ignore DT memreserve entries when booting in UEFI mode prevents early_init_fdt_scan_reserved_mem() from being called for arm64 kernels booting via UEFI. This was done because the kernel will use the UEFI memory map to determine reserved memory regions. That approach has problems in that early_init_fdt_scan_reserved_mem() also reserves the FDT itself and any node-specific reserved memory. By chance of some kernel configs, the FDT may be overwritten before it can be unflattened and the kernel will fail to boot. More subtle problems will result if the FDT has node specific reserved memory which is not really reserved. This patch has the UEFI stub remove the memory reserve map entries from the FDT as it does with the memory nodes. This allows early_init_fdt_scan_reserved_mem() to be called unconditionally so that the other needed reservations are made. Signed-off-by: Mark Salter Acked-by: Ard Biesheuvel Acked-by: Mark Rutland Signed-off-by: Matt Fleming --- arch/arm64/mm/init.c | 3 +-- drivers/firmware/efi/libstub/fdt.c | 10 +++++++++- 2 files changed, 10 insertions(+), 3 deletions(-) diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c index 5472c2401876..a83061f37e43 100644 --- a/arch/arm64/mm/init.c +++ b/arch/arm64/mm/init.c @@ -149,8 +149,7 @@ void __init arm64_memblock_init(void) memblock_reserve(__virt_to_phys(initrd_start), initrd_end - initrd_start); #endif - if (!efi_enabled(EFI_MEMMAP)) - early_init_fdt_scan_reserved_mem(); + early_init_fdt_scan_reserved_mem(); /* 4GB maximum for 32-bit only capable devices */ if (IS_ENABLED(CONFIG_ZONE_DMA)) diff --git a/drivers/firmware/efi/libstub/fdt.c b/drivers/firmware/efi/libstub/fdt.c index a56bb3528755..c846a9608cbd 100644 --- a/drivers/firmware/efi/libstub/fdt.c +++ b/drivers/firmware/efi/libstub/fdt.c @@ -22,7 +22,7 @@ efi_status_t update_fdt(efi_system_table_t *sys_table, void *orig_fdt, unsigned long map_size, unsigned long desc_size, u32 desc_ver) { - int node, prev; + int node, prev, num_rsv; int status; u32 fdt_val32; u64 fdt_val64; @@ -73,6 +73,14 @@ efi_status_t update_fdt(efi_system_table_t *sys_table, void *orig_fdt, prev = node; } + /* + * Delete all memory reserve map entries. When booting via UEFI, + * kernel will use the UEFI memory map to find reserved regions. + */ + num_rsv = fdt_num_mem_rsv(fdt); + while (num_rsv-- > 0) + fdt_del_mem_rsv(fdt, num_rsv); + node = fdt_subnode_offset(fdt, 0, "chosen"); if (node < 0) { node = fdt_add_subnode(fdt, 0, "chosen"); -- cgit v1.2.3 From b794dbcd31c8b19118b7d02a39453576aa8e78fb Mon Sep 17 00:00:00 2001 From: Rajeev Kumar Date: Tue, 9 Sep 2014 12:27:19 +0530 Subject: ASoC: Update email id of the author I moved from ST Microelectronics and so updating email-id to personal one. Signed-off-by: Rajeev Kumar Signed-off-by: Mark Brown --- sound/soc/codecs/sta529.c | 4 ++-- sound/soc/dwc/designware_i2s.c | 2 +- sound/soc/spear/spear_pcm.c | 4 ++-- 3 files changed, 5 insertions(+), 5 deletions(-) diff --git a/sound/soc/codecs/sta529.c b/sound/soc/codecs/sta529.c index 9aa1323fb2ab..89c748dd3d6e 100644 --- a/sound/soc/codecs/sta529.c +++ b/sound/soc/codecs/sta529.c @@ -4,7 +4,7 @@ * sound/soc/codecs/sta529.c -- spear ALSA Soc codec driver * * Copyright (C) 2012 ST Microelectronics - * Rajeev Kumar + * Rajeev Kumar * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any @@ -426,5 +426,5 @@ static struct i2c_driver sta529_i2c_driver = { module_i2c_driver(sta529_i2c_driver); MODULE_DESCRIPTION("ASoC STA529 codec driver"); -MODULE_AUTHOR("Rajeev Kumar "); +MODULE_AUTHOR("Rajeev Kumar "); MODULE_LICENSE("GPL"); diff --git a/sound/soc/dwc/designware_i2s.c b/sound/soc/dwc/designware_i2s.c index a97d27f4d19c..e961388e6e9c 100644 --- a/sound/soc/dwc/designware_i2s.c +++ b/sound/soc/dwc/designware_i2s.c @@ -455,7 +455,7 @@ static struct platform_driver dw_i2s_driver = { module_platform_driver(dw_i2s_driver); -MODULE_AUTHOR("Rajeev Kumar "); +MODULE_AUTHOR("Rajeev Kumar "); MODULE_DESCRIPTION("DESIGNWARE I2S SoC Interface"); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:designware_i2s"); diff --git a/sound/soc/spear/spear_pcm.c b/sound/soc/spear/spear_pcm.c index 0e5a8f35d0ad..a7dc3c56f44d 100644 --- a/sound/soc/spear/spear_pcm.c +++ b/sound/soc/spear/spear_pcm.c @@ -4,7 +4,7 @@ * sound/soc/spear/spear_pcm.c * * Copyright (C) 2012 ST Microelectronics - * Rajeev Kumar + * Rajeev Kumar * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any @@ -50,6 +50,6 @@ int devm_spear_pcm_platform_register(struct device *dev, } EXPORT_SYMBOL_GPL(devm_spear_pcm_platform_register); -MODULE_AUTHOR("Rajeev Kumar "); +MODULE_AUTHOR("Rajeev Kumar "); MODULE_DESCRIPTION("SPEAr PCM DMA module"); MODULE_LICENSE("GPL"); -- cgit v1.2.3 From 61e89e65e31516cae8124599e43be955eb10514c Mon Sep 17 00:00:00 2001 From: Roland Stigge Date: Tue, 9 Sep 2014 15:17:50 +0200 Subject: spi/pl022: Fix error message This patch fixes an error message typo ("not" missing). Signed-off-by: Roland Stigge Signed-off-by: Mark Brown --- drivers/spi/spi-pl022.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c index 1189cfd96477..f1f0a587e4fc 100644 --- a/drivers/spi/spi-pl022.c +++ b/drivers/spi/spi-pl022.c @@ -2136,7 +2136,7 @@ static int pl022_probe(struct amba_device *adev, const struct amba_id *id) cs_gpio); else if (gpio_direction_output(cs_gpio, 1)) dev_err(&adev->dev, - "could set gpio %d as output\n", + "could not set gpio %d as output\n", cs_gpio); } } -- cgit v1.2.3 From 133c2681c4a0c1b589d138c2fdd0f131bdce20ed Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Tue, 9 Sep 2014 16:51:49 +0100 Subject: ASoC: samsung-i2s: Check secondary DAI exists before referencing In a couple of places the driver is missing a check to ensure there is a secondary DAI before it de-references the pointer to it, causing a null pointer de-reference. This patch adds a check to avoid this. Signed-off-by: Charles Keepax Acked-by: Sylwester Nawrocki Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/samsung/i2s.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/sound/soc/samsung/i2s.c b/sound/soc/samsung/i2s.c index 03eec22f0f46..9d513473b300 100644 --- a/sound/soc/samsung/i2s.c +++ b/sound/soc/samsung/i2s.c @@ -462,7 +462,7 @@ static int i2s_set_sysclk(struct snd_soc_dai *dai, if (dir == SND_SOC_CLOCK_IN) rfs = 0; - if ((rfs && other->rfs && (other->rfs != rfs)) || + if ((rfs && other && other->rfs && (other->rfs != rfs)) || (any_active(i2s) && (((dir == SND_SOC_CLOCK_IN) && !(mod & MOD_CDCLKCON)) || @@ -762,7 +762,8 @@ static void i2s_shutdown(struct snd_pcm_substream *substream, } else { u32 mod = readl(i2s->addr + I2SMOD); i2s->cdclk_out = !(mod & MOD_CDCLKCON); - other->cdclk_out = i2s->cdclk_out; + if (other) + other->cdclk_out = i2s->cdclk_out; } /* Reset any constraint on RFS and BFS */ i2s->rfs = 0; -- cgit v1.2.3 From b8b27a44ddf1987e9bae84b99741b0a61192e017 Mon Sep 17 00:00:00 2001 From: Guodong Xu Date: Wed, 10 Sep 2014 11:50:39 +0800 Subject: regulator: remove unnecessary of_node_get() to parent These of_node_get() were added to balance refcount decrements inside of of_find_node_by_name(). See: commit c92f5dd2c42f ("regulator: Add missing of_node_put()") However of_find_node_by_name() was then replaced by of_get_child_by_name(), which doesn't call of_node_put() against its input parameter. So, need to remove these unnecessary of_node_get() calls. Signed-off-by: Guodong Xu Reviewed-by: Axel Lin Signed-off-by: Mark Brown --- drivers/regulator/88pm8607.c | 2 +- drivers/regulator/da9052-regulator.c | 4 ++-- drivers/regulator/max8907-regulator.c | 2 +- drivers/regulator/max8925-regulator.c | 2 +- drivers/regulator/max8997.c | 2 +- drivers/regulator/palmas-regulator.c | 1 - drivers/regulator/tps65910-regulator.c | 2 +- 7 files changed, 7 insertions(+), 8 deletions(-) diff --git a/drivers/regulator/88pm8607.c b/drivers/regulator/88pm8607.c index 337634ad0562..6d77dcd7dcf6 100644 --- a/drivers/regulator/88pm8607.c +++ b/drivers/regulator/88pm8607.c @@ -319,7 +319,7 @@ static int pm8607_regulator_dt_init(struct platform_device *pdev, struct regulator_config *config) { struct device_node *nproot, *np; - nproot = of_node_get(pdev->dev.parent->of_node); + nproot = pdev->dev.parent->of_node; if (!nproot) return -ENODEV; nproot = of_get_child_by_name(nproot, "regulators"); diff --git a/drivers/regulator/da9052-regulator.c b/drivers/regulator/da9052-regulator.c index fdb6ea8ae7e6..00033625a09c 100644 --- a/drivers/regulator/da9052-regulator.c +++ b/drivers/regulator/da9052-regulator.c @@ -422,9 +422,9 @@ static int da9052_regulator_probe(struct platform_device *pdev) config.init_data = pdata->regulators[pdev->id]; } else { #ifdef CONFIG_OF - struct device_node *nproot, *np; + struct device_node *nproot = da9052->dev->of_node; + struct device_node *np; - nproot = of_node_get(da9052->dev->of_node); if (!nproot) return -ENODEV; diff --git a/drivers/regulator/max8907-regulator.c b/drivers/regulator/max8907-regulator.c index 9623e9e290bf..3426be89c9f6 100644 --- a/drivers/regulator/max8907-regulator.c +++ b/drivers/regulator/max8907-regulator.c @@ -226,7 +226,7 @@ static int max8907_regulator_parse_dt(struct platform_device *pdev) struct device_node *np, *regulators; int ret; - np = of_node_get(pdev->dev.parent->of_node); + np = pdev->dev.parent->of_node; if (!np) return 0; diff --git a/drivers/regulator/max8925-regulator.c b/drivers/regulator/max8925-regulator.c index dad2bcd14e96..7770777befc4 100644 --- a/drivers/regulator/max8925-regulator.c +++ b/drivers/regulator/max8925-regulator.c @@ -250,7 +250,7 @@ static int max8925_regulator_dt_init(struct platform_device *pdev, struct device_node *nproot, *np; int rcount; - nproot = of_node_get(pdev->dev.parent->of_node); + nproot = pdev->dev.parent->of_node; if (!nproot) return -ENODEV; np = of_get_child_by_name(nproot, "regulators"); diff --git a/drivers/regulator/max8997.c b/drivers/regulator/max8997.c index 90b4c530dee5..9c31e215a521 100644 --- a/drivers/regulator/max8997.c +++ b/drivers/regulator/max8997.c @@ -917,7 +917,7 @@ static int max8997_pmic_dt_parse_pdata(struct platform_device *pdev, struct max8997_regulator_data *rdata; unsigned int i, dvs_voltage_nr = 1, ret; - pmic_np = of_node_get(iodev->dev->of_node); + pmic_np = iodev->dev->of_node; if (!pmic_np) { dev_err(&pdev->dev, "could not find pmic sub-node\n"); return -ENODEV; diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c index a7ce34d1b5f2..1878e5b567ef 100644 --- a/drivers/regulator/palmas-regulator.c +++ b/drivers/regulator/palmas-regulator.c @@ -1427,7 +1427,6 @@ static void palmas_dt_to_pdata(struct device *dev, u32 prop; int idx, ret; - node = of_node_get(node); regulators = of_get_child_by_name(node, "regulators"); if (!regulators) { dev_info(dev, "regulator node not found\n"); diff --git a/drivers/regulator/tps65910-regulator.c b/drivers/regulator/tps65910-regulator.c index fa7db8847578..e584c998b55f 100644 --- a/drivers/regulator/tps65910-regulator.c +++ b/drivers/regulator/tps65910-regulator.c @@ -1014,7 +1014,7 @@ static struct tps65910_board *tps65910_parse_dt_reg_data( if (!pmic_plat_data) return NULL; - np = of_node_get(pdev->dev.parent->of_node); + np = pdev->dev.parent->of_node; regulators = of_get_child_by_name(np, "regulators"); if (!regulators) { dev_err(&pdev->dev, "regulator node not found\n"); -- cgit v1.2.3 From 8f70e515a8bb6a1908b40b786cb43f6491e8da04 Mon Sep 17 00:00:00 2001 From: Qiao Zhou Date: Wed, 10 Sep 2014 17:54:07 +0800 Subject: ASoC: soc-pcm: fix dpcm_path_get error handling dpcm_path_get may return -ENOMEM when allocating memory for list fails. We should not keep processing path or start up dpcm dai in this case. Signed-off-by: Qiao Zhou Acked-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/soc-compress.c | 6 +++++- sound/soc/soc-pcm.c | 6 +++++- 2 files changed, 10 insertions(+), 2 deletions(-) diff --git a/sound/soc/soc-compress.c b/sound/soc/soc-compress.c index 27c06acce205..3092b58fede6 100644 --- a/sound/soc/soc-compress.c +++ b/sound/soc/soc-compress.c @@ -101,7 +101,11 @@ static int soc_compr_open_fe(struct snd_compr_stream *cstream) fe->dpcm[stream].runtime = fe_substream->runtime; - if (dpcm_path_get(fe, stream, &list) <= 0) { + ret = dpcm_path_get(fe, stream, &list); + if (ret < 0) { + mutex_unlock(&fe->card->mutex); + goto fe_err; + } else if (ret == 0) { dev_dbg(fe->dev, "ASoC: %s no valid %s route\n", fe->dai_link->name, stream ? "capture" : "playback"); } diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c index 731fdb5b5f9b..642c86240752 100644 --- a/sound/soc/soc-pcm.c +++ b/sound/soc/soc-pcm.c @@ -2352,7 +2352,11 @@ static int dpcm_fe_dai_open(struct snd_pcm_substream *fe_substream) mutex_lock_nested(&fe->card->mutex, SND_SOC_CARD_CLASS_RUNTIME); fe->dpcm[stream].runtime = fe_substream->runtime; - if (dpcm_path_get(fe, stream, &list) <= 0) { + ret = dpcm_path_get(fe, stream, &list); + if (ret < 0) { + mutex_unlock(&fe->card->mutex); + return ret; + } else if (ret == 0) { dev_dbg(fe->dev, "ASoC: %s no valid %s route\n", fe->dai_link->name, stream ? "capture" : "playback"); } -- cgit v1.2.3 From b440bde74f043c8ec31081cb59c9a53ade954701 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Wed, 10 Sep 2014 13:45:01 -0600 Subject: PCI: Add pci_ignore_hotplug() to ignore hotplug events for a device Powering off a hot-pluggable device, e.g., with pci_set_power_state(D3cold), normally generates a hot-remove event that unbinds the driver. Some drivers expect to remain bound to a device even while they power it off and back on again. This can be dangerous, because if the device is removed or replaced while it is powered off, the driver doesn't know that anything changed. But some drivers accept that risk. Add pci_ignore_hotplug() for use by drivers that know their device cannot be removed. Using pci_ignore_hotplug() tells the PCI core that hot-plug events for the device should be ignored. The radeon and nouveau drivers use this to switch between a low-power, integrated GPU and a higher-power, higher-performance discrete GPU. They power off the unused GPU, but they want to remain bound to it. This is a reimplementation of f244d8b623da ("ACPIPHP / radeon / nouveau: Fix VGA switcheroo problem related to hotplug") but extends it to work with both acpiphp and pciehp. This fixes a problem where systems with dual GPUs using the radeon drivers become unusable, freezing every few seconds (see bugzillas below). The resume of the radeon device may also fail, e.g., This fixes problems on dual GPU systems where the radeon driver becomes unusable because of problems while suspending the device, as in bug 79701: [drm] radeon: finishing device. radeon 0000:01:00.0: Userspace still has active objects ! radeon 0000:01:00.0: ffff8800cb4ec288 ffff8800cb4ec000 16384 4294967297 force free ... WARNING: CPU: 0 PID: 67 at /home/apw/COD/linux/drivers/gpu/drm/radeon/radeon_gart.c:234 radeon_gart_unbind+0xd2/0xe0 [radeon]() trying to unbind memory from uninitialized GART ! or while resuming it, as in bug 77261: radeon 0000:01:00.0: ring 0 stalled for more than 10158msec radeon 0000:01:00.0: GPU lockup ... radeon 0000:01:00.0: GPU pci config reset pciehp 0000:00:01.0:pcie04: Card not present on Slot(1-1) radeon 0000:01:00.0: GPU reset succeeded, trying to resume *ERROR* radeon: dpm resume failed radeon 0000:01:00.0: Wait for MC idle timedout ! Link: https://bugzilla.kernel.org/show_bug.cgi?id=77261 Link: https://bugzilla.kernel.org/show_bug.cgi?id=79701 Reported-by: Shawn Starr Reported-by: Jose P. Signed-off-by: Bjorn Helgaas Acked-by: Alex Deucher Acked-by: Rajat Jain Acked-by: Rafael J. Wysocki Acked-by: Dave Airlie CC: stable@vger.kernel.org # v3.15+ --- drivers/gpu/drm/nouveau/nouveau_drm.c | 1 + drivers/gpu/drm/radeon/radeon_drv.c | 1 + drivers/pci/hotplug/acpiphp_glue.c | 16 ++++++---------- drivers/pci/hotplug/pciehp_hpc.c | 12 ++++++++++++ include/linux/pci.h | 6 ++++++ 5 files changed, 26 insertions(+), 10 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_drm.c b/drivers/gpu/drm/nouveau/nouveau_drm.c index 250a5e88c751..9c3af96a7153 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drm.c +++ b/drivers/gpu/drm/nouveau/nouveau_drm.c @@ -627,6 +627,7 @@ int nouveau_pmops_suspend(struct device *dev) pci_save_state(pdev); pci_disable_device(pdev); + pci_ignore_hotplug(pdev); pci_set_power_state(pdev, PCI_D3hot); return 0; } diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c index 8df888908833..abbd87adfd75 100644 --- a/drivers/gpu/drm/radeon/radeon_drv.c +++ b/drivers/gpu/drm/radeon/radeon_drv.c @@ -440,6 +440,7 @@ static int radeon_pmops_runtime_suspend(struct device *dev) ret = radeon_suspend_kms(drm_dev, false, false); pci_save_state(pdev); pci_disable_device(pdev); + pci_ignore_hotplug(pdev); pci_set_power_state(pdev, PCI_D3cold); drm_dev->switch_power_state = DRM_SWITCH_POWER_DYNAMIC_OFF; diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c index 70741c8c46a0..6cd5160fc057 100644 --- a/drivers/pci/hotplug/acpiphp_glue.c +++ b/drivers/pci/hotplug/acpiphp_glue.c @@ -560,19 +560,15 @@ static void disable_slot(struct acpiphp_slot *slot) slot->flags &= (~SLOT_ENABLED); } -static bool acpiphp_no_hotplug(struct acpi_device *adev) -{ - return adev && adev->flags.no_hotplug; -} - static bool slot_no_hotplug(struct acpiphp_slot *slot) { - struct acpiphp_func *func; + struct pci_bus *bus = slot->bus; + struct pci_dev *dev; - list_for_each_entry(func, &slot->funcs, sibling) - if (acpiphp_no_hotplug(func_to_acpi_device(func))) + list_for_each_entry(dev, &bus->devices, bus_list) { + if (PCI_SLOT(dev->devfn) == slot->device && dev->ignore_hotplug) return true; - + } return false; } @@ -645,7 +641,7 @@ static void trim_stale_devices(struct pci_dev *dev) status = acpi_evaluate_integer(adev->handle, "_STA", NULL, &sta); alive = (ACPI_SUCCESS(status) && device_status_valid(sta)) - || acpiphp_no_hotplug(adev); + || dev->ignore_hotplug; } if (!alive) alive = pci_device_is_present(dev); diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 9da84b8b27d8..5e01ae39ec46 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -506,6 +506,8 @@ static irqreturn_t pcie_isr(int irq, void *dev_id) { struct controller *ctrl = (struct controller *)dev_id; struct pci_dev *pdev = ctrl_dev(ctrl); + struct pci_bus *subordinate = pdev->subordinate; + struct pci_dev *dev; struct slot *slot = ctrl->slot; u16 detected, intr_loc; @@ -539,6 +541,16 @@ static irqreturn_t pcie_isr(int irq, void *dev_id) wake_up(&ctrl->queue); } + if (subordinate) { + list_for_each_entry(dev, &subordinate->devices, bus_list) { + if (dev->ignore_hotplug) { + ctrl_dbg(ctrl, "ignoring hotplug event %#06x (%s requested no hotplug)\n", + intr_loc, pci_name(dev)); + return IRQ_HANDLED; + } + } + } + if (!(intr_loc & ~PCI_EXP_SLTSTA_CC)) return IRQ_HANDLED; diff --git a/include/linux/pci.h b/include/linux/pci.h index 61978a460841..96453f9bc8ba 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -303,6 +303,7 @@ struct pci_dev { D3cold, not set for devices powered on/off by the corresponding bridge */ + unsigned int ignore_hotplug:1; /* Ignore hotplug events */ unsigned int d3_delay; /* D3->D0 transition time in ms */ unsigned int d3cold_delay; /* D3cold->D0 transition time in ms */ @@ -1021,6 +1022,11 @@ bool pci_dev_run_wake(struct pci_dev *dev); bool pci_check_pme_status(struct pci_dev *dev); void pci_pme_wakeup_bus(struct pci_bus *bus); +static inline void pci_ignore_hotplug(struct pci_dev *dev) +{ + dev->ignore_hotplug = 1; +} + static inline int pci_enable_wake(struct pci_dev *dev, pci_power_t state, bool enable) { -- cgit v1.2.3 From 7b7a91152d3c2ddca95172cac1675625cc8dffaf Mon Sep 17 00:00:00 2001 From: Benjamin Coddington Date: Wed, 10 Sep 2014 14:09:20 -0400 Subject: GFS2: Hash the negative dentry during inode lookup Fix a regression introduced by: 6d4ade986f9c8df31e68 GFS2: Add atomic_open support where an early return misses d_splice_alias() which had been adding the negative dentry. Signed-off-by: Benjamin Coddington Signed-off-by: Bob Peterson Signed-off-by: Steven Whitehouse --- fs/gfs2/inode.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/gfs2/inode.c b/fs/gfs2/inode.c index e62e59477884..9317ddc1b3c3 100644 --- a/fs/gfs2/inode.c +++ b/fs/gfs2/inode.c @@ -840,8 +840,10 @@ static struct dentry *__gfs2_lookup(struct inode *dir, struct dentry *dentry, int error; inode = gfs2_lookupi(dir, &dentry->d_name, 0); - if (!inode) + if (inode == NULL) { + d_add(dentry, NULL); return NULL; + } if (IS_ERR(inode)) return ERR_CAST(inode); -- cgit v1.2.3 From a937cca270c544c4319572b57b196b2251b07dd2 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Wed, 10 Sep 2014 21:22:51 +0200 Subject: GFS2: Don't use MAXQUOTAS value MAXQUOTAS value defines maximum number of quota types VFS supports. This isn't necessarily the number of types gfs2 supports and with addition of project quotas these two numbers stop matching. So make gfs2 use its private definition. CC: cluster-devel@redhat.com Signed-off-by: Jan Kara Signed-off-by: Steven Whitehouse --- fs/gfs2/incore.h | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/fs/gfs2/incore.h b/fs/gfs2/incore.h index 67d310c9ada3..39e7e9959b74 100644 --- a/fs/gfs2/incore.h +++ b/fs/gfs2/incore.h @@ -262,6 +262,9 @@ struct gfs2_holder { unsigned long gh_ip; }; +/* Number of quota types we support */ +#define GFS2_MAXQUOTAS 2 + /* Resource group multi-block reservation, in order of appearance: Step 1. Function prepares to write, allocates a mb, sets the size hint. @@ -282,8 +285,8 @@ struct gfs2_blkreserv { u64 rs_inum; /* Inode number for reservation */ /* ancillary quota stuff */ - struct gfs2_quota_data *rs_qa_qd[2 * MAXQUOTAS]; - struct gfs2_holder rs_qa_qd_ghs[2 * MAXQUOTAS]; + struct gfs2_quota_data *rs_qa_qd[2 * GFS2_MAXQUOTAS]; + struct gfs2_holder rs_qa_qd_ghs[2 * GFS2_MAXQUOTAS]; unsigned int rs_qa_qd_num; }; -- cgit v1.2.3 From 7a9744cb455e6faa287e148394b4b422a6f3c5c4 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 11 Sep 2014 12:59:21 +0200 Subject: ALSA: hda - Fix invalid pin powermap without jack detection When a driver is set up without the jack detection explicitly (either by passing a model option or via a specific fixup), the pin powermap of IDT/STAC codecs is set up wrongly, resulting in the silence output. It's because of a logic failure in stac_init_power_map(). It tries to avoid creating a callback for the pins that have other auto-hp and auto-mic callbacks, but the check is done in a wrong way at a wrong time. The stac_init_power_map() should be called after creating other jack detection ctls, and the jack callback should be created only for jack-detectable widgets. This patch fixes the check in stac_init_power_map() and its callee at the right place, after snd_hda_gen_build_controls(). Reported-by: Adam Richter Cc: Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index ea823e1100da..98cd1908c039 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -566,8 +566,8 @@ static void stac_init_power_map(struct hda_codec *codec) if (snd_hda_jack_tbl_get(codec, nid)) continue; if (def_conf == AC_JACK_PORT_COMPLEX && - !(spec->vref_mute_led_nid == nid || - is_jack_detectable(codec, nid))) { + spec->vref_mute_led_nid != nid && + is_jack_detectable(codec, nid)) { snd_hda_jack_detect_enable_callback(codec, nid, STAC_PWR_EVENT, jack_update_power); @@ -4276,11 +4276,18 @@ static int stac_parse_auto_config(struct hda_codec *codec) return err; } - stac_init_power_map(codec); - return 0; } +static int stac_build_controls(struct hda_codec *codec) +{ + int err = snd_hda_gen_build_controls(codec); + + if (err < 0) + return err; + stac_init_power_map(codec); + return 0; +} static int stac_init(struct hda_codec *codec) { @@ -4392,7 +4399,7 @@ static int stac_suspend(struct hda_codec *codec) #endif /* CONFIG_PM */ static const struct hda_codec_ops stac_patch_ops = { - .build_controls = snd_hda_gen_build_controls, + .build_controls = stac_build_controls, .build_pcms = snd_hda_gen_build_pcms, .init = stac_init, .free = stac_free, -- cgit v1.2.3 From 3856e548372513665670ca5db60d9a74b970fe0d Mon Sep 17 00:00:00 2001 From: Amos Kong Date: Thu, 11 Sep 2014 22:20:39 +0930 Subject: virtio-rng: fix stuck of hot-unplugging busy device When we try to hot-remove a busy virtio-rng device from QEMU monitor, the device can't be hot-removed. Because virtio-rng driver hangs at wait_for_completion_killable(). This patch exits the waiting by completing have_data completion before unregistering, resets data_avail to avoid the hwrng core use wrong buffer bytes. Signed-off-by: Amos Kong Reviewed-by: Amit Shah Cc: stable@vger.kernel.org Signed-off-by: Rusty Russell --- drivers/char/hw_random/virtio-rng.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/char/hw_random/virtio-rng.c b/drivers/char/hw_random/virtio-rng.c index 2e3139eda93b..849b22877196 100644 --- a/drivers/char/hw_random/virtio-rng.c +++ b/drivers/char/hw_random/virtio-rng.c @@ -137,6 +137,8 @@ static void remove_common(struct virtio_device *vdev) { struct virtrng_info *vi = vdev->priv; + vi->data_avail = 0; + complete(&vi->have_data); vdev->config->reset(vdev); vi->busy = false; if (vi->hwrng_register_done) -- cgit v1.2.3 From f49819560f53b7f3a596a8ea2e6764dc86695b62 Mon Sep 17 00:00:00 2001 From: Amos Kong Date: Thu, 11 Sep 2014 22:21:53 +0930 Subject: virtio-rng: skip reading when we start to remove the device Before we really unregister the hwrng device, reading will get stuck if the virtio device is reset. We should return error for reading when we start to remove the device. Signed-off-by: Amos Kong Reviewed-by: Amit Shah Cc: stable@vger.kernel.org Signed-off-by: Rusty Russell --- drivers/char/hw_random/virtio-rng.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/char/hw_random/virtio-rng.c b/drivers/char/hw_random/virtio-rng.c index 849b22877196..132c9ccfdc62 100644 --- a/drivers/char/hw_random/virtio-rng.c +++ b/drivers/char/hw_random/virtio-rng.c @@ -36,6 +36,7 @@ struct virtrng_info { int index; bool busy; bool hwrng_register_done; + bool hwrng_removed; }; @@ -68,6 +69,9 @@ static int virtio_read(struct hwrng *rng, void *buf, size_t size, bool wait) int ret; struct virtrng_info *vi = (struct virtrng_info *)rng->priv; + if (vi->hwrng_removed) + return -ENODEV; + if (!vi->busy) { vi->busy = true; init_completion(&vi->have_data); @@ -137,6 +141,7 @@ static void remove_common(struct virtio_device *vdev) { struct virtrng_info *vi = vdev->priv; + vi->hwrng_removed = true; vi->data_avail = 0; complete(&vi->have_data); vdev->config->reset(vdev); -- cgit v1.2.3 From 774418253e0ec226ad220c6237bba80fd3f4fbc0 Mon Sep 17 00:00:00 2001 From: Paul Handrigan Date: Thu, 11 Sep 2014 09:52:46 -0500 Subject: ASoC: cs4265: Fix register address to set the proper data type. The SPDIF control register must be written to set the data type in hw_params not the ADC control register. Signed-off-by: Paul Handrigan Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/codecs/cs4265.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/soc/codecs/cs4265.c b/sound/soc/codecs/cs4265.c index a20b30ca52c0..367242a2757b 100644 --- a/sound/soc/codecs/cs4265.c +++ b/sound/soc/codecs/cs4265.c @@ -458,12 +458,12 @@ static int cs4265_pcm_hw_params(struct snd_pcm_substream *substream, if (params_width(params) == 16) { snd_soc_update_bits(codec, CS4265_DAC_CTL, CS4265_DAC_CTL_DIF, (1 << 5)); - snd_soc_update_bits(codec, CS4265_ADC_CTL, + snd_soc_update_bits(codec, CS4265_SPDIF_CTL2, CS4265_SPDIF_CTL2_DIF, (1 << 7)); } else { snd_soc_update_bits(codec, CS4265_DAC_CTL, CS4265_DAC_CTL_DIF, (3 << 5)); - snd_soc_update_bits(codec, CS4265_ADC_CTL, + snd_soc_update_bits(codec, CS4265_SPDIF_CTL2, CS4265_SPDIF_CTL2_DIF, (1 << 7)); } break; @@ -472,7 +472,7 @@ static int cs4265_pcm_hw_params(struct snd_pcm_substream *substream, CS4265_DAC_CTL_DIF, 0); snd_soc_update_bits(codec, CS4265_ADC_CTL, CS4265_ADC_DIF, 0); - snd_soc_update_bits(codec, CS4265_ADC_CTL, + snd_soc_update_bits(codec, CS4265_SPDIF_CTL2, CS4265_SPDIF_CTL2_DIF, (1 << 6)); break; -- cgit v1.2.3 From a6cc1b9478e769aca95d3a1bcb071d38b3f6bc30 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Thu, 28 Aug 2014 14:59:50 +0100 Subject: phy: miphy365x: Fix off-by-one error We index the RX/TX speed select values in the following way: rx_tx_spd[miphy_phy->sata_gen]; However rx_tx_spd[] starts at index zero and the SATA_GENx's start at one. In this patch we pad out the first element in rx_tx_spd[] in an attempt to realign the values. Cc: Alexandre Torgue Reported-by: Gabriel Fernandez Signed-off-by: Lee Jones Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/phy-miphy365x.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/phy/phy-miphy365x.c b/drivers/phy/phy-miphy365x.c index e111baf187ce..e0fb7a1e5a5a 100644 --- a/drivers/phy/phy-miphy365x.c +++ b/drivers/phy/phy-miphy365x.c @@ -163,6 +163,7 @@ enum miphy_sata_gen { }; static u8 rx_tx_spd[] = { + 0, /* GEN0 doesn't exist. */ TX_SPDSEL_GEN1_VAL | RX_SPDSEL_GEN1_VAL, TX_SPDSEL_GEN2_VAL | RX_SPDSEL_GEN2_VAL, TX_SPDSEL_GEN3_VAL | RX_SPDSEL_GEN3_VAL -- cgit v1.2.3 From 6100a7c1e9fb4ce6a2c3ed04081d4d5ab8362f0f Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Mon, 1 Sep 2014 17:03:17 +0200 Subject: phy: spear1310-miphy: fix driver dependencies ST SPEAR1310-MIPHY support should be available only on ST SPEAr1310 machine. Signed-off-by: Bartlomiej Zolnierkiewicz Acked-by: Kyungmin Park Cc: Pratyush Anand Cc: Mohit Kumar Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 4ff8cbb620d3..0972c2b5d580 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -214,6 +214,7 @@ config PHY_QCOM_IPQ806X_SATA config PHY_ST_SPEAR1310_MIPHY tristate "ST SPEAR1310-MIPHY driver" select GENERIC_PHY + depends on MACH_SPEAR1310 || COMPILE_TEST help Support for ST SPEAr1310 MIPHY which can be used for PCIe and SATA. -- cgit v1.2.3 From 7652d35f98b5049be370835182a98ba5689f8361 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Mon, 1 Sep 2014 17:04:15 +0200 Subject: phy: spear1340-miphy: fix driver dependencies ST SPEAR1340-MIPHY support should be available only on ST SPEAr1340 machine. Signed-off-by: Bartlomiej Zolnierkiewicz Acked-by: Kyungmin Park Cc: Pratyush Anand Cc: Mohit Kumar Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 0972c2b5d580..f833aa271a2e 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -221,6 +221,7 @@ config PHY_ST_SPEAR1310_MIPHY config PHY_ST_SPEAR1340_MIPHY tristate "ST SPEAR1340-MIPHY driver" select GENERIC_PHY + depends on MACH_SPEAR1340 || COMPILE_TEST help Support for ST SPEAr1340 MIPHY which can be used for PCIe and SATA. -- cgit v1.2.3 From c01206796139e2b1feb7539bc72174fef1c6dc6e Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Wed, 10 Sep 2014 13:50:37 -0700 Subject: Input: atkbd - do not try 'deactivate' keyboard on any LG laptops We are getting more and more reports about LG laptops not having functioning keyboard if we try to deactivate keyboard during probe. Given that having keyboard deactivated is merely "nice to have" instead of a hard requirement for probing, let's disable it on all LG boxes instead of trying to hunt down particular models. This change is prompted by patches trying to add "LG Electronics"/"ROCKY" and "LG Electronics"/"LW60-F27B" to the DMI list. https://bugzilla.kernel.org/show_bug.cgi?id=77051 Cc: stable@vger.kernel.org Reported-by: Jaime Velasco Juan Reported-by: Georgios Tsalikis Tested-by: Jaime Velasco Juan Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/atkbd.c | 8 -------- 1 file changed, 8 deletions(-) diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c index 2dd1d0dd4f7d..6f5d79569136 100644 --- a/drivers/input/keyboard/atkbd.c +++ b/drivers/input/keyboard/atkbd.c @@ -1791,14 +1791,6 @@ static const struct dmi_system_id atkbd_dmi_quirk_table[] __initconst = { { .matches = { DMI_MATCH(DMI_SYS_VENDOR, "LG Electronics"), - DMI_MATCH(DMI_PRODUCT_NAME, "LW25-B7HV"), - }, - .callback = atkbd_deactivate_fixup, - }, - { - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "LG Electronics"), - DMI_MATCH(DMI_PRODUCT_NAME, "P1-J273B"), }, .callback = atkbd_deactivate_fixup, }, -- cgit v1.2.3 From cc18a69c92d0972bc2fc5a047ee3be1e8398171b Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 10 Sep 2014 13:53:37 -0700 Subject: Input: i8042 - add Fujitsu U574 to no_timeout dmi table https://bugzilla.kernel.org/show_bug.cgi?id=69731 Cc: stable@vger.kernel.org Reported-by: Jason Robinson Signed-off-by: Hans de Goede Signed-off-by: Dmitry Torokhov --- drivers/input/serio/i8042-x86ia64io.h | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index 136b7b204f56..2f08daa49f8b 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -608,6 +608,14 @@ static const struct dmi_system_id __initconst i8042_dmi_notimeout_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv4 Notebook PC"), }, }, + { + /* Fujitsu U574 laptop */ + /* https://bugzilla.kernel.org/show_bug.cgi?id=69731 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"), + DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK U574"), + }, + }, { } }; -- cgit v1.2.3 From d2682118f4bb3ceb835f91c1a694407a31bb7378 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 11 Sep 2014 10:10:26 -0700 Subject: Input: i8042 - add nomux quirk for Avatar AVIU-145A6 The sys_vendor / product_name are somewhat generic unfortunately, so this may lead to some false positives. But nomux usually does no harm, where as not having it clearly is causing problems on the Avatar AVIU-145A6. https://bugzilla.kernel.org/show_bug.cgi?id=77391 Cc: stable@vger.kernel.org Reported-by: Hugo P Signed-off-by: Hans de Goede Signed-off-by: Dmitry Torokhov --- drivers/input/serio/i8042-x86ia64io.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index 2f08daa49f8b..713e3ddb43bd 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -465,6 +465,13 @@ static const struct dmi_system_id __initconst i8042_dmi_nomux_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv4 Notebook PC"), }, }, + { + /* Avatar AVIU-145A6 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Intel"), + DMI_MATCH(DMI_PRODUCT_NAME, "IC4I"), + }, + }, { } }; -- cgit v1.2.3 From 266e43c4eb81440e81da6c51bc5d4f9be2b7839c Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 11 Sep 2014 10:13:13 -0700 Subject: Input: i8042 - also set the firmware id for MUXed ports So that firmware-id matching can be used with multiplexed aux ports too. Signed-off-by: Hans de Goede Signed-off-by: Dmitry Torokhov --- drivers/input/serio/i8042.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c index 3807c3e971cc..f5a98af3b325 100644 --- a/drivers/input/serio/i8042.c +++ b/drivers/input/serio/i8042.c @@ -1254,6 +1254,8 @@ static int __init i8042_create_aux_port(int idx) } else { snprintf(serio->name, sizeof(serio->name), "i8042 AUX%d port", idx); snprintf(serio->phys, sizeof(serio->phys), I8042_MUX_PHYS_DESC, idx + 1); + strlcpy(serio->firmware_id, i8042_aux_firmware_id, + sizeof(serio->firmware_id)); } port->serio = serio; -- cgit v1.2.3 From 807362cd960daac415e2c8906750b2472c22c80e Mon Sep 17 00:00:00 2001 From: Nick Dyer Date: Thu, 11 Sep 2014 10:31:45 -0700 Subject: Input: atmel_mxt_ts - fix merge in DT documentation Something went a bit wrong in merging f5940231a - there's a bit of repeated text that's been introduced. Signed-off-by: Nick Dyer Signed-off-by: Dmitry Torokhov --- Documentation/devicetree/bindings/input/atmel,maxtouch.txt | 4 ---- 1 file changed, 4 deletions(-) diff --git a/Documentation/devicetree/bindings/input/atmel,maxtouch.txt b/Documentation/devicetree/bindings/input/atmel,maxtouch.txt index 0ac23f2ed104..1852906517ab 100644 --- a/Documentation/devicetree/bindings/input/atmel,maxtouch.txt +++ b/Documentation/devicetree/bindings/input/atmel,maxtouch.txt @@ -11,10 +11,6 @@ Required properties: Optional properties for main touchpad device: -- linux,gpio-keymap: An array of up to 4 entries indicating the Linux - keycode generated by each GPIO. Linux keycodes are defined in - . - - linux,gpio-keymap: When enabled, the SPT_GPIOPWN_T19 object sends messages on GPIO bit changes. An array of up to 8 entries can be provided indicating the Linux keycode mapped to each bit of the status byte, -- cgit v1.2.3 From 6a73336bde293741026614135419e9b76afb9145 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 12 Sep 2014 08:50:10 -0600 Subject: PCI: Remove "no hotplug settings from platform" warning We print way too many messages like this: pci 0000:00:00.0: no hotplug settings from platform pci 0000:00:00.0: using default PCI settings This usually happens when the platform doesn't supply an ACPI _HPP method, but the method is optional, so there's no point in warning about it. Not only are the messages useless, but we call pci_configure_slot() far too many times, so they're repeated many times. I'll fix the overuse of pci_configure_slot() too, but that will wait until the next merge window. For now, just remove both log messages. Link: https://bugzilla.kernel.org/show_bug.cgi?id=84391 Signed-off-by: Bjorn Helgaas Acked-by: Yinghai Lu --- drivers/pci/hotplug/pcihp_slot.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/drivers/pci/hotplug/pcihp_slot.c b/drivers/pci/hotplug/pcihp_slot.c index e246a10a0d2c..3e36ec8d708a 100644 --- a/drivers/pci/hotplug/pcihp_slot.c +++ b/drivers/pci/hotplug/pcihp_slot.c @@ -46,7 +46,6 @@ static void program_hpp_type0(struct pci_dev *dev, struct hpp_type0 *hpp) */ if (pci_is_pcie(dev)) return; - dev_info(&dev->dev, "using default PCI settings\n"); hpp = &pci_default_type0; } @@ -153,7 +152,6 @@ void pci_configure_slot(struct pci_dev *dev) { struct pci_dev *cdev; struct hotplug_params hpp; - int ret; if (!(dev->hdr_type == PCI_HEADER_TYPE_NORMAL || (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE && @@ -163,9 +161,7 @@ void pci_configure_slot(struct pci_dev *dev) pcie_bus_configure_settings(dev->bus); memset(&hpp, 0, sizeof(hpp)); - ret = pci_get_hp_params(dev, &hpp); - if (ret) - dev_warn(&dev->dev, "no hotplug settings from platform\n"); + pci_get_hp_params(dev, &hpp); program_hpp_type2(dev, hpp.t2); program_hpp_type1(dev, hpp.t1); -- cgit v1.2.3 From e918a62a2ba81d10a3cc2c513dc70034c9524a95 Mon Sep 17 00:00:00 2001 From: Punit Agrawal Date: Mon, 1 Sep 2014 17:16:01 +0100 Subject: ARM: 8135/1: Fix in-correct barrier usage in SWP{B} emulation According to the ARM ARMv7, explicit barriers are necessary when using synchronisation primitives such as SWP{B}. The use of these instructions does not automatically imply a barrier and any ordering requirements by the software must be explicitly expressed with the use of suitable barriers. Based on this, remove the barriers from SWP{B} emulation. Acked-by: Will Deacon Signed-off-by: Punit Agrawal Signed-off-by: Russell King --- arch/arm/kernel/swp_emulate.c | 15 --------------- 1 file changed, 15 deletions(-) diff --git a/arch/arm/kernel/swp_emulate.c b/arch/arm/kernel/swp_emulate.c index 67ca8578c6d8..587fdfe1a72c 100644 --- a/arch/arm/kernel/swp_emulate.c +++ b/arch/arm/kernel/swp_emulate.c @@ -142,14 +142,6 @@ static int emulate_swpX(unsigned int address, unsigned int *data, while (1) { unsigned long temp; - /* - * Barrier required between accessing protected resource and - * releasing a lock for it. Legacy code might not have done - * this, and we cannot determine that this is not the case - * being emulated, so insert always. - */ - smp_mb(); - if (type == TYPE_SWPB) __user_swpb_asm(*data, address, res, temp); else @@ -162,13 +154,6 @@ static int emulate_swpX(unsigned int address, unsigned int *data, } if (res == 0) { - /* - * Barrier also required between acquiring a lock for a - * protected resource and accessing the resource. Inserted for - * same reason as above. - */ - smp_mb(); - if (type == TYPE_SWPB) swpbcounter++; else -- cgit v1.2.3 From d9981380b49b839ecaffbbe131908a342db68980 Mon Sep 17 00:00:00 2001 From: Victor Kamensky Date: Thu, 4 Sep 2014 06:07:33 +0100 Subject: ARM: 8137/1: fix get_user BE behavior for target variable with size of 8 bytes e38361d 'ARM: 8091/2: add get_user() support for 8 byte types' commit broke V7 BE get_user call when target var size is 64 bit, but '*ptr' size is 32 bit or smaller. e38361d changed type of __r2 from 'register unsigned long' to 'register typeof(x) __r2 asm("r2")' i.e before the change even when target variable size was 64 bit, __r2 was still 32 bit. But after e38361d commit, for target var of 64 bit size, __r2 became 64 bit and now it should occupy 2 registers r2, and r3. The issue in BE case that r3 register is least significant word of __r2 and r2 register is most significant word of __r2. But __get_user_4 still copies result into r2 (most significant word of __r2). Subsequent code copies from __r2 into x, but for situation described it will pick up only garbage from r3 register. Special __get_user_64t_(124) functions are introduced. They are similar to corresponding __get_user_(124) function but result stored in r3 register (lsw in case of 64 bit __r2 in BE image). Those function are used by get_user macro in case of BE and target var size is 64bit. Also changed __get_user_lo8 name into __get_user_32t_8 to get consistent naming accross all cases. Signed-off-by: Victor Kamensky Suggested-by: Daniel Thompson Reviewed-by: Daniel Thompson Signed-off-by: Russell King --- arch/arm/include/asm/uaccess.h | 48 ++++++++++++++++++++++++++++++++++-------- arch/arm/lib/getuser.S | 38 +++++++++++++++++++++++++++++++-- 2 files changed, 75 insertions(+), 11 deletions(-) diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h index a4cd7af475e9..4767eb9caa78 100644 --- a/arch/arm/include/asm/uaccess.h +++ b/arch/arm/include/asm/uaccess.h @@ -107,8 +107,11 @@ static inline void set_fs(mm_segment_t fs) extern int __get_user_1(void *); extern int __get_user_2(void *); extern int __get_user_4(void *); -extern int __get_user_lo8(void *); +extern int __get_user_32t_8(void *); extern int __get_user_8(void *); +extern int __get_user_64t_1(void *); +extern int __get_user_64t_2(void *); +extern int __get_user_64t_4(void *); #define __GUP_CLOBBER_1 "lr", "cc" #ifdef CONFIG_CPU_USE_DOMAINS @@ -117,7 +120,7 @@ extern int __get_user_8(void *); #define __GUP_CLOBBER_2 "lr", "cc" #endif #define __GUP_CLOBBER_4 "lr", "cc" -#define __GUP_CLOBBER_lo8 "lr", "cc" +#define __GUP_CLOBBER_32t_8 "lr", "cc" #define __GUP_CLOBBER_8 "lr", "cc" #define __get_user_x(__r2,__p,__e,__l,__s) \ @@ -131,12 +134,30 @@ extern int __get_user_8(void *); /* narrowing a double-word get into a single 32bit word register: */ #ifdef __ARMEB__ -#define __get_user_xb(__r2, __p, __e, __l, __s) \ - __get_user_x(__r2, __p, __e, __l, lo8) +#define __get_user_x_32t(__r2, __p, __e, __l, __s) \ + __get_user_x(__r2, __p, __e, __l, 32t_8) #else -#define __get_user_xb __get_user_x +#define __get_user_x_32t __get_user_x #endif +/* + * storing result into proper least significant word of 64bit target var, + * different only for big endian case where 64 bit __r2 lsw is r3: + */ +#ifdef __ARMEB__ +#define __get_user_x_64t(__r2, __p, __e, __l, __s) \ + __asm__ __volatile__ ( \ + __asmeq("%0", "r0") __asmeq("%1", "r2") \ + __asmeq("%3", "r1") \ + "bl __get_user_64t_" #__s \ + : "=&r" (__e), "=r" (__r2) \ + : "0" (__p), "r" (__l) \ + : __GUP_CLOBBER_##__s) +#else +#define __get_user_x_64t __get_user_x +#endif + + #define __get_user_check(x,p) \ ({ \ unsigned long __limit = current_thread_info()->addr_limit - 1; \ @@ -146,17 +167,26 @@ extern int __get_user_8(void *); register int __e asm("r0"); \ switch (sizeof(*(__p))) { \ case 1: \ - __get_user_x(__r2, __p, __e, __l, 1); \ + if (sizeof((x)) >= 8) \ + __get_user_x_64t(__r2, __p, __e, __l, 1); \ + else \ + __get_user_x(__r2, __p, __e, __l, 1); \ break; \ case 2: \ - __get_user_x(__r2, __p, __e, __l, 2); \ + if (sizeof((x)) >= 8) \ + __get_user_x_64t(__r2, __p, __e, __l, 2); \ + else \ + __get_user_x(__r2, __p, __e, __l, 2); \ break; \ case 4: \ - __get_user_x(__r2, __p, __e, __l, 4); \ + if (sizeof((x)) >= 8) \ + __get_user_x_64t(__r2, __p, __e, __l, 4); \ + else \ + __get_user_x(__r2, __p, __e, __l, 4); \ break; \ case 8: \ if (sizeof((x)) < 8) \ - __get_user_xb(__r2, __p, __e, __l, 4); \ + __get_user_x_32t(__r2, __p, __e, __l, 4); \ else \ __get_user_x(__r2, __p, __e, __l, 8); \ break; \ diff --git a/arch/arm/lib/getuser.S b/arch/arm/lib/getuser.S index 938600098b88..8ecfd15c3a02 100644 --- a/arch/arm/lib/getuser.S +++ b/arch/arm/lib/getuser.S @@ -80,7 +80,7 @@ ENTRY(__get_user_8) ENDPROC(__get_user_8) #ifdef __ARMEB__ -ENTRY(__get_user_lo8) +ENTRY(__get_user_32t_8) check_uaccess r0, 8, r1, r2, __get_user_bad #ifdef CONFIG_CPU_USE_DOMAINS add r0, r0, #4 @@ -90,7 +90,37 @@ ENTRY(__get_user_lo8) #endif mov r0, #0 ret lr -ENDPROC(__get_user_lo8) +ENDPROC(__get_user_32t_8) + +ENTRY(__get_user_64t_1) + check_uaccess r0, 1, r1, r2, __get_user_bad8 +8: TUSER(ldrb) r3, [r0] + mov r0, #0 + ret lr +ENDPROC(__get_user_64t_1) + +ENTRY(__get_user_64t_2) + check_uaccess r0, 2, r1, r2, __get_user_bad8 +#ifdef CONFIG_CPU_USE_DOMAINS +rb .req ip +9: ldrbt r3, [r0], #1 +10: ldrbt rb, [r0], #0 +#else +rb .req r0 +9: ldrb r3, [r0] +10: ldrb rb, [r0, #1] +#endif + orr r3, rb, r3, lsl #8 + mov r0, #0 + ret lr +ENDPROC(__get_user_64t_2) + +ENTRY(__get_user_64t_4) + check_uaccess r0, 4, r1, r2, __get_user_bad8 +11: TUSER(ldr) r3, [r0] + mov r0, #0 + ret lr +ENDPROC(__get_user_64t_4) #endif __get_user_bad8: @@ -111,5 +141,9 @@ ENDPROC(__get_user_bad8) .long 6b, __get_user_bad8 #ifdef __ARMEB__ .long 7b, __get_user_bad + .long 8b, __get_user_bad8 + .long 9b, __get_user_bad8 + .long 10b, __get_user_bad8 + .long 11b, __get_user_bad8 #endif .popsection -- cgit v1.2.3 From f39c01047994e66e7f3d89ddb4c6141f23349d8d Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Thu, 11 Sep 2014 16:19:37 +1000 Subject: NFS: remove BUG possibility in nfs4_open_and_get_state commit 4fa2c54b5198d09607a534e2fd436581064587ed NFS: nfs4_do_open should add negative results to the dcache. used "d_drop(); d_add();" to ensure that a dentry was hashed as a negative cached entry. This is not safe if the dentry has an non-NULL ->d_inode. It will trigger a BUG_ON in d_instantiate(). In that case, d_delete() is needed. Also, only d_add if the dentry is currently unhashed, it seems pointless removed and re-adding it unchanged. Reported-by: Christoph Hellwig Fixes: 4fa2c54b5198d09607a534e2fd436581064587ed Cc: Jeff Layton Link: http://lkml.kernel.org/r/20140908144525.GB19811@infradead.org Signed-off-by: NeilBrown Acked-by: Jeff Layton Signed-off-by: Trond Myklebust --- fs/nfs/nfs4proc.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 7dd8aca31c29..ac2dd953fc18 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -2226,9 +2226,13 @@ static int _nfs4_open_and_get_state(struct nfs4_opendata *opendata, ret = _nfs4_proc_open(opendata); if (ret != 0) { if (ret == -ENOENT) { - d_drop(opendata->dentry); - d_add(opendata->dentry, NULL); - nfs_set_verifier(opendata->dentry, + dentry = opendata->dentry; + if (dentry->d_inode) + d_delete(dentry); + else if (d_unhashed(dentry)) + d_add(dentry, NULL); + + nfs_set_verifier(dentry, nfs_save_change_attribute(opendata->dir->d_inode)); } goto out; -- cgit v1.2.3 From cfb2f9d5c921e38b0f12bb26fed10b877664444d Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 12 Sep 2014 20:56:04 +0100 Subject: GFS2: fix d_splice_alias() misuses Callers of d_splice_alias(dentry, inode) don't need iput(), neither on success nor on failure. Either the reference to inode is stored in a previously negative dentry, or it's dropped. In either case inode reference the caller used to hold is consumed. __gfs2_lookup() does iput() in case when d_splice_alias() has failed. Double iput() if we ever hit that. And gfs2_create_inode() ends up not only with double iput(), but with link count dropped to zero - on an inode it has just found in directory. Cc: stable@vger.kernel.org # v3.14+ Signed-off-by: Al Viro Signed-off-by: Steven Whitehouse --- fs/gfs2/inode.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/fs/gfs2/inode.c b/fs/gfs2/inode.c index 9317ddc1b3c3..fc8ac2ee0667 100644 --- a/fs/gfs2/inode.c +++ b/fs/gfs2/inode.c @@ -626,8 +626,10 @@ static int gfs2_create_inode(struct inode *dir, struct dentry *dentry, if (!IS_ERR(inode)) { d = d_splice_alias(inode, dentry); error = PTR_ERR(d); - if (IS_ERR(d)) + if (IS_ERR(d)) { + inode = ERR_CAST(d); goto fail_gunlock; + } error = 0; if (file) { if (S_ISREG(inode->i_mode)) { @@ -856,7 +858,6 @@ static struct dentry *__gfs2_lookup(struct inode *dir, struct dentry *dentry, d = d_splice_alias(inode, dentry); if (IS_ERR(d)) { - iput(inode); gfs2_glock_dq_uninit(&gh); return d; } -- cgit v1.2.3 From 8936decdd977ee614234153a1aba85d12329fa7a Mon Sep 17 00:00:00 2001 From: Grygorii Strashko Date: Fri, 12 Sep 2014 17:54:00 +0300 Subject: spi: davinci: request cs_gpio's from probe Now CS GPIOs are requested from struct spi_master.setup() callback and that causes failures when Client SPI device is getting accessed through SPIDEV driver. The failure happens, because .setup() callback may be called many times from IOCTL handler and when it's called second time gpio_request() will fail and return -EBUSY. Hence, fix it by moving CS GPIOs requesting code in .probe(). Reported-by: Murali Karicheri Signed-off-by: Grygorii Strashko Signed-off-by: Mark Brown --- drivers/spi/spi-davinci.c | 34 +++++++++++++++++++++++++--------- 1 file changed, 25 insertions(+), 9 deletions(-) diff --git a/drivers/spi/spi-davinci.c b/drivers/spi/spi-davinci.c index 276a3884fb3c..ff54f73dce4b 100644 --- a/drivers/spi/spi-davinci.c +++ b/drivers/spi/spi-davinci.c @@ -397,24 +397,21 @@ static int davinci_spi_setup(struct spi_device *spi) struct spi_master *master = spi->master; struct device_node *np = spi->dev.of_node; bool internal_cs = true; - unsigned long flags = GPIOF_DIR_OUT; dspi = spi_master_get_devdata(spi->master); pdata = &dspi->pdata; - flags |= (spi->mode & SPI_CS_HIGH) ? GPIOF_INIT_LOW : GPIOF_INIT_HIGH; - if (!(spi->mode & SPI_NO_CS)) { if (np && (master->cs_gpios != NULL) && (spi->cs_gpio >= 0)) { - retval = gpio_request_one(spi->cs_gpio, - flags, dev_name(&spi->dev)); + retval = gpio_direction_output( + spi->cs_gpio, !(spi->mode & SPI_CS_HIGH)); internal_cs = false; } else if (pdata->chip_sel && spi->chip_select < pdata->num_chipselect && pdata->chip_sel[spi->chip_select] != SPI_INTERN_CS) { spi->cs_gpio = pdata->chip_sel[spi->chip_select]; - retval = gpio_request_one(spi->cs_gpio, - flags, dev_name(&spi->dev)); + retval = gpio_direction_output( + spi->cs_gpio, !(spi->mode & SPI_CS_HIGH)); internal_cs = false; } } @@ -441,8 +438,6 @@ static int davinci_spi_setup(struct spi_device *spi) static void davinci_spi_cleanup(struct spi_device *spi) { - if (spi->cs_gpio >= 0) - gpio_free(spi->cs_gpio); } static int davinci_spi_check_error(struct davinci_spi *dspi, int int_status) @@ -967,6 +962,27 @@ static int davinci_spi_probe(struct platform_device *pdev) if (dspi->version == SPI_VERSION_2) dspi->bitbang.flags |= SPI_READY; + if (pdev->dev.of_node) { + int i; + + for (i = 0; i < pdata->num_chipselect; i++) { + int cs_gpio = of_get_named_gpio(pdev->dev.of_node, + "cs-gpios", i); + + if (cs_gpio == -EPROBE_DEFER) { + ret = cs_gpio; + goto free_clk; + } + + if (gpio_is_valid(cs_gpio)) { + ret = devm_gpio_request(&pdev->dev, cs_gpio, + dev_name(&pdev->dev)); + if (ret) + goto free_clk; + } + } + } + r = platform_get_resource(pdev, IORESOURCE_DMA, 0); if (r) dma_rx_chan = r->start; -- cgit v1.2.3 From 07833d88314c496f8a136c6e4b4729c69e65b878 Mon Sep 17 00:00:00 2001 From: Jianqun Date: Sat, 13 Sep 2014 08:41:03 +0800 Subject: ASoC: rockchip-i2s: fix master mode set bit error Fix error format set to I2S master or slave mode. Test on RK3288 board with max98090. Signed-off-by: Jianqun Xu Signed-off-by: Mark Brown --- sound/soc/rockchip/rockchip_i2s.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/sound/soc/rockchip/rockchip_i2s.c b/sound/soc/rockchip/rockchip_i2s.c index 8d8e4b59049f..870a6645c782 100644 --- a/sound/soc/rockchip/rockchip_i2s.c +++ b/sound/soc/rockchip/rockchip_i2s.c @@ -165,13 +165,14 @@ static int rockchip_i2s_set_fmt(struct snd_soc_dai *cpu_dai, struct rk_i2s_dev *i2s = to_info(cpu_dai); unsigned int mask = 0, val = 0; - mask = I2S_CKR_MSS_SLAVE; + mask = I2S_CKR_MSS_MASK; switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { case SND_SOC_DAIFMT_CBS_CFS: - val = I2S_CKR_MSS_SLAVE; + /* Set source clock in Master mode */ + val = I2S_CKR_MSS_MASTER; break; case SND_SOC_DAIFMT_CBM_CFM: - val = I2S_CKR_MSS_MASTER; + val = I2S_CKR_MSS_SLAVE; break; default: return -EINVAL; -- cgit v1.2.3 From 2f1e93f81cebfa99b668f27cdb14992ff23480a4 Mon Sep 17 00:00:00 2001 From: Jianqun Date: Sat, 13 Sep 2014 08:42:12 +0800 Subject: ASoC: rockchip-i2s: fix registers' property of rockchip i2s controller Reference rockchip I2S controller TRM, modify some registers' property I2S_FIFOLR: read / write, but not volatile, not precious I2S_INTSR: read / write I2S_CLR: volatile, register value will be cleared by read Test on RK3288 with max98090. Signed-off-by: Jianqun Xu Signed-off-by: Mark Brown --- sound/soc/rockchip/rockchip_i2s.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/soc/rockchip/rockchip_i2s.c b/sound/soc/rockchip/rockchip_i2s.c index 870a6645c782..fb9e05c9f471 100644 --- a/sound/soc/rockchip/rockchip_i2s.c +++ b/sound/soc/rockchip/rockchip_i2s.c @@ -362,6 +362,8 @@ static bool rockchip_i2s_rd_reg(struct device *dev, unsigned int reg) case I2S_XFER: case I2S_CLR: case I2S_RXDR: + case I2S_FIFOLR: + case I2S_INTSR: return true; default: return false; @@ -371,8 +373,8 @@ static bool rockchip_i2s_rd_reg(struct device *dev, unsigned int reg) static bool rockchip_i2s_volatile_reg(struct device *dev, unsigned int reg) { switch (reg) { - case I2S_FIFOLR: case I2S_INTSR: + case I2S_CLR: return true; default: return false; @@ -382,8 +384,6 @@ static bool rockchip_i2s_volatile_reg(struct device *dev, unsigned int reg) static bool rockchip_i2s_precious_reg(struct device *dev, unsigned int reg) { switch (reg) { - case I2S_FIFOLR: - return true; default: return false; } -- cgit v1.2.3 From d67f660edbce696f3fc6bc8c25b869f5a72279bb Mon Sep 17 00:00:00 2001 From: Jianqun Date: Sat, 13 Sep 2014 09:04:41 +0800 Subject: ASoC: rockchip-i2s: dt: swap tx and rx channed request number in example Reference to RK3288 TRM, fix an error channel id for i2s tx and rx Table 10-1 DMAC_BUS Request Mapping Table Req number Source Polarity 0 I2S tx High level 1 I2S rx High level Tested on RK3288 board. Signed-off-by: Jianqun Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/sound/rockchip-i2s.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/sound/rockchip-i2s.txt b/Documentation/devicetree/bindings/sound/rockchip-i2s.txt index 6c55fcfe5e1d..9b82c20b306b 100644 --- a/Documentation/devicetree/bindings/sound/rockchip-i2s.txt +++ b/Documentation/devicetree/bindings/sound/rockchip-i2s.txt @@ -31,7 +31,7 @@ i2s@ff890000 { #address-cells = <1>; #size-cells = <0>; dmas = <&pdma1 0>, <&pdma1 1>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; clock-names = "i2s_hclk", "i2s_clk"; clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>; }; -- cgit v1.2.3 From 1887e724e2b6df06847522fe9dc2ab53639516cc Mon Sep 17 00:00:00 2001 From: Subbaraya Sundeep Bhatta Date: Sun, 9 Nov 2014 09:55:00 +0000 Subject: iio: adc: xilinx-xadc: assign auxiliary channels address correctly This patch fixes incorrect logic for assigning address to auxiliary channels of xilinx xadc. Signed-off-by: Subbaraya Sundeep Bhatta Acked-by: Lars-Peter Clausen Cc: Stable@vger.kernel.org Signed-off-by: Jonathan Cameron --- drivers/iio/adc/xilinx-xadc-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/adc/xilinx-xadc-core.c b/drivers/iio/adc/xilinx-xadc-core.c index fd2745c62943..626b39749767 100644 --- a/drivers/iio/adc/xilinx-xadc-core.c +++ b/drivers/iio/adc/xilinx-xadc-core.c @@ -1126,7 +1126,7 @@ static int xadc_parse_dt(struct iio_dev *indio_dev, struct device_node *np, chan->address = XADC_REG_VPVN; } else { chan->scan_index = 15 + reg; - chan->scan_index = XADC_REG_VAUX(reg - 1); + chan->address = XADC_REG_VAUX(reg - 1); } num_channels++; chan++; -- cgit v1.2.3 From d4f51956ac8ad302db9b0c4e4232775b1baa7b44 Mon Sep 17 00:00:00 2001 From: Ludovic Desroches Date: Thu, 9 Oct 2014 15:02:00 +0100 Subject: iio: adc: at91: don't use the last converted data register If touchscreen mode is enabled and a conversion is requested on another channel, the result in the last converted data register can be a touchscreen relative value. Starting a conversion involves to do a conversion for all active channel. It starts with ADC channels and ends with touchscreen channels. Then if ADC_LCD register is not read quickly, its content may be a touchscreen conversion. To remove this temporal constraint, the conversion value is taken from the channel data register. Signed-off-by: Ludovic Desroches Acked-by: Alexandre Belloni Acked-by: Nicolas Ferre Cc: Stable@vger.kernel.org Signed-off-by: Jonathan Cameron --- drivers/iio/adc/at91_adc.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c index 772e869c280e..7eadaf16adc1 100644 --- a/drivers/iio/adc/at91_adc.c +++ b/drivers/iio/adc/at91_adc.c @@ -196,6 +196,7 @@ struct at91_adc_state { bool done; int irq; u16 last_value; + int chnb; struct mutex lock; u8 num_channels; void __iomem *reg_base; @@ -274,7 +275,7 @@ void handle_adc_eoc_trigger(int irq, struct iio_dev *idev) disable_irq_nosync(irq); iio_trigger_poll(idev->trig); } else { - st->last_value = at91_adc_readl(st, AT91_ADC_LCDR); + st->last_value = at91_adc_readl(st, AT91_ADC_CHAN(st, st->chnb)); st->done = true; wake_up_interruptible(&st->wq_data_avail); } @@ -351,7 +352,7 @@ static irqreturn_t at91_adc_rl_interrupt(int irq, void *private) unsigned int reg; status &= at91_adc_readl(st, AT91_ADC_IMR); - if (status & st->registers->drdy_mask) + if (status & GENMASK(st->num_channels - 1, 0)) handle_adc_eoc_trigger(irq, idev); if (status & AT91RL_ADC_IER_PEN) { @@ -418,7 +419,7 @@ static irqreturn_t at91_adc_9x5_interrupt(int irq, void *private) AT91_ADC_IER_YRDY | AT91_ADC_IER_PRDY; - if (status & st->registers->drdy_mask) + if (status & GENMASK(st->num_channels - 1, 0)) handle_adc_eoc_trigger(irq, idev); if (status & AT91_ADC_IER_PEN) { @@ -689,9 +690,10 @@ static int at91_adc_read_raw(struct iio_dev *idev, case IIO_CHAN_INFO_RAW: mutex_lock(&st->lock); + st->chnb = chan->channel; at91_adc_writel(st, AT91_ADC_CHER, AT91_ADC_CH(chan->channel)); - at91_adc_writel(st, AT91_ADC_IER, st->registers->drdy_mask); + at91_adc_writel(st, AT91_ADC_IER, BIT(chan->channel)); at91_adc_writel(st, AT91_ADC_CR, AT91_ADC_START); ret = wait_event_interruptible_timeout(st->wq_data_avail, @@ -708,7 +710,7 @@ static int at91_adc_read_raw(struct iio_dev *idev, at91_adc_writel(st, AT91_ADC_CHDR, AT91_ADC_CH(chan->channel)); - at91_adc_writel(st, AT91_ADC_IDR, st->registers->drdy_mask); + at91_adc_writel(st, AT91_ADC_IDR, BIT(chan->channel)); st->last_value = 0; st->done = false; -- cgit v1.2.3 From a31d0928999fbf33b3a6042e8bcb7b7f7e07d094 Mon Sep 17 00:00:00 2001 From: Denis CIOCCA Date: Thu, 9 Oct 2014 13:55:00 +0100 Subject: iio:magnetometer: bugfix magnetometers gain values This patch fix gains values. The first driver was designed using engineering samples, in mass production the values are changed. Signed-off-by: Denis Ciocca Cc: Stable@vger.kernel.org Signed-off-by: Jonathan Cameron --- drivers/iio/magnetometer/st_magn_core.c | 52 +++++++++++++++++++-------------- 1 file changed, 30 insertions(+), 22 deletions(-) diff --git a/drivers/iio/magnetometer/st_magn_core.c b/drivers/iio/magnetometer/st_magn_core.c index a4b64130ac2f..68cae86dbd29 100644 --- a/drivers/iio/magnetometer/st_magn_core.c +++ b/drivers/iio/magnetometer/st_magn_core.c @@ -42,7 +42,8 @@ #define ST_MAGN_FS_AVL_5600MG 5600 #define ST_MAGN_FS_AVL_8000MG 8000 #define ST_MAGN_FS_AVL_8100MG 8100 -#define ST_MAGN_FS_AVL_10000MG 10000 +#define ST_MAGN_FS_AVL_12000MG 12000 +#define ST_MAGN_FS_AVL_16000MG 16000 /* CUSTOM VALUES FOR SENSOR 1 */ #define ST_MAGN_1_WAI_EXP 0x3c @@ -69,20 +70,20 @@ #define ST_MAGN_1_FS_AVL_4700_VAL 0x05 #define ST_MAGN_1_FS_AVL_5600_VAL 0x06 #define ST_MAGN_1_FS_AVL_8100_VAL 0x07 -#define ST_MAGN_1_FS_AVL_1300_GAIN_XY 1100 -#define ST_MAGN_1_FS_AVL_1900_GAIN_XY 855 -#define ST_MAGN_1_FS_AVL_2500_GAIN_XY 670 -#define ST_MAGN_1_FS_AVL_4000_GAIN_XY 450 -#define ST_MAGN_1_FS_AVL_4700_GAIN_XY 400 -#define ST_MAGN_1_FS_AVL_5600_GAIN_XY 330 -#define ST_MAGN_1_FS_AVL_8100_GAIN_XY 230 -#define ST_MAGN_1_FS_AVL_1300_GAIN_Z 980 -#define ST_MAGN_1_FS_AVL_1900_GAIN_Z 760 -#define ST_MAGN_1_FS_AVL_2500_GAIN_Z 600 -#define ST_MAGN_1_FS_AVL_4000_GAIN_Z 400 -#define ST_MAGN_1_FS_AVL_4700_GAIN_Z 355 -#define ST_MAGN_1_FS_AVL_5600_GAIN_Z 295 -#define ST_MAGN_1_FS_AVL_8100_GAIN_Z 205 +#define ST_MAGN_1_FS_AVL_1300_GAIN_XY 909 +#define ST_MAGN_1_FS_AVL_1900_GAIN_XY 1169 +#define ST_MAGN_1_FS_AVL_2500_GAIN_XY 1492 +#define ST_MAGN_1_FS_AVL_4000_GAIN_XY 2222 +#define ST_MAGN_1_FS_AVL_4700_GAIN_XY 2500 +#define ST_MAGN_1_FS_AVL_5600_GAIN_XY 3030 +#define ST_MAGN_1_FS_AVL_8100_GAIN_XY 4347 +#define ST_MAGN_1_FS_AVL_1300_GAIN_Z 1020 +#define ST_MAGN_1_FS_AVL_1900_GAIN_Z 1315 +#define ST_MAGN_1_FS_AVL_2500_GAIN_Z 1666 +#define ST_MAGN_1_FS_AVL_4000_GAIN_Z 2500 +#define ST_MAGN_1_FS_AVL_4700_GAIN_Z 2816 +#define ST_MAGN_1_FS_AVL_5600_GAIN_Z 3389 +#define ST_MAGN_1_FS_AVL_8100_GAIN_Z 4878 #define ST_MAGN_1_MULTIREAD_BIT false /* CUSTOM VALUES FOR SENSOR 2 */ @@ -105,10 +106,12 @@ #define ST_MAGN_2_FS_MASK 0x60 #define ST_MAGN_2_FS_AVL_4000_VAL 0x00 #define ST_MAGN_2_FS_AVL_8000_VAL 0x01 -#define ST_MAGN_2_FS_AVL_10000_VAL 0x02 -#define ST_MAGN_2_FS_AVL_4000_GAIN 430 -#define ST_MAGN_2_FS_AVL_8000_GAIN 230 -#define ST_MAGN_2_FS_AVL_10000_GAIN 230 +#define ST_MAGN_2_FS_AVL_12000_VAL 0x02 +#define ST_MAGN_2_FS_AVL_16000_VAL 0x03 +#define ST_MAGN_2_FS_AVL_4000_GAIN 146 +#define ST_MAGN_2_FS_AVL_8000_GAIN 292 +#define ST_MAGN_2_FS_AVL_12000_GAIN 438 +#define ST_MAGN_2_FS_AVL_16000_GAIN 584 #define ST_MAGN_2_MULTIREAD_BIT false #define ST_MAGN_2_OUT_X_L_ADDR 0x28 #define ST_MAGN_2_OUT_Y_L_ADDR 0x2a @@ -266,9 +269,14 @@ static const struct st_sensors st_magn_sensors[] = { .gain = ST_MAGN_2_FS_AVL_8000_GAIN, }, [2] = { - .num = ST_MAGN_FS_AVL_10000MG, - .value = ST_MAGN_2_FS_AVL_10000_VAL, - .gain = ST_MAGN_2_FS_AVL_10000_GAIN, + .num = ST_MAGN_FS_AVL_12000MG, + .value = ST_MAGN_2_FS_AVL_12000_VAL, + .gain = ST_MAGN_2_FS_AVL_12000_GAIN, + }, + [3] = { + .num = ST_MAGN_FS_AVL_16000MG, + .value = ST_MAGN_2_FS_AVL_16000_VAL, + .gain = ST_MAGN_2_FS_AVL_16000_GAIN, }, }, }, -- cgit v1.2.3 From 2ae83bf93882d1ec0cd775c489bd1bee611f792e Mon Sep 17 00:00:00 2001 From: Steve French Date: Sun, 14 Sep 2014 17:06:36 -0500 Subject: [CIFS] Fix setting time before epoch (negative time values) xfstest generic/258 sets the time on a file to a negative value (before 1970) which fails since do_div can not handle negative numbers. In addition 'normal' division of 64 bit values does not build on 32 bit arch so have to workaround this by special casing negative values in cifs_NTtimeToUnix Samba server also has a bug with this (see samba bugzilla 7771) but it works to Windows server. Signed-off-by: Steve French --- fs/cifs/netmisc.c | 20 ++++++++++++++++---- 1 file changed, 16 insertions(+), 4 deletions(-) diff --git a/fs/cifs/netmisc.c b/fs/cifs/netmisc.c index 6834b9c3bec1..b333ff60781d 100644 --- a/fs/cifs/netmisc.c +++ b/fs/cifs/netmisc.c @@ -925,11 +925,23 @@ cifs_NTtimeToUnix(__le64 ntutc) /* BB what about the timezone? BB */ /* Subtract the NTFS time offset, then convert to 1s intervals. */ - u64 t; + s64 t = le64_to_cpu(ntutc) - NTFS_TIME_OFFSET; + + /* + * Unfortunately can not use normal 64 bit division on 32 bit arch, but + * the alternative, do_div, does not work with negative numbers so have + * to special case them + */ + if (t < 0) { + t = -t; + ts.tv_nsec = (long)(do_div(t, 10000000) * 100); + ts.tv_nsec = -ts.tv_nsec; + ts.tv_sec = -t; + } else { + ts.tv_nsec = (long)do_div(t, 10000000) * 100; + ts.tv_sec = t; + } - t = le64_to_cpu(ntutc) - NTFS_TIME_OFFSET; - ts.tv_nsec = do_div(t, 10000000) * 100; - ts.tv_sec = t; return ts; } -- cgit v1.2.3 From 611a7a4fd8b5fb6b25ab1f8bdcde61800a7feacf Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Fri, 12 Sep 2014 07:37:42 +0100 Subject: drm/i915: Fix SRC_COPY width on 830/845g One small change I forgot to make in commit c4d69da167fa967749aeb70bc0e94a457e5d00c1 Author: Chris Wilson Date: Mon Sep 8 14:25:41 2014 +0100 drm/i915: Evict CS TLBs between batches was to update the copy width for the compact BLT copy instruction. Reported-by: Thomas Richter Signed-off-by: Chris Wilson Cc: Thomas Richter Cc: Jani Nikula Cc: stable@vger.kernel.org Tested-by: Thomas Richter Acked-by: Daniel Vetter Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_ringbuffer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c index 2d068edd1adc..47a126a0493f 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.c +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c @@ -1400,7 +1400,7 @@ i830_dispatch_execbuffer(struct intel_engine_cs *ring, */ intel_ring_emit(ring, SRC_COPY_BLT_CMD | BLT_WRITE_RGBA); intel_ring_emit(ring, BLT_DEPTH_32 | BLT_ROP_SRC_COPY | 4096); - intel_ring_emit(ring, DIV_ROUND_UP(len, 4096) << 16 | 1024); + intel_ring_emit(ring, DIV_ROUND_UP(len, 4096) << 16 | 4096); intel_ring_emit(ring, cs_offset); intel_ring_emit(ring, 4096); intel_ring_emit(ring, offset); -- cgit v1.2.3 From da80659d4aa758dc6935b10ec64513f0b67bc969 Mon Sep 17 00:00:00 2001 From: Steve French Date: Sun, 14 Sep 2014 23:27:09 -0500 Subject: [SMB3] Fix oops when creating symlinks on smb3 We were not checking for symlink support properly for SMB2/SMB3 mounts so could oops when mounted with mfsymlinks when try to create symlink when mfsymlinks on smb2/smb3 mounts Signed-off-by: Steve French Cc: # 3.14+ CC: Sachin Prabhu --- fs/cifs/link.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/fs/cifs/link.c b/fs/cifs/link.c index 68559fd557fb..a5c2812ead68 100644 --- a/fs/cifs/link.c +++ b/fs/cifs/link.c @@ -213,8 +213,12 @@ create_mf_symlink(const unsigned int xid, struct cifs_tcon *tcon, if (rc) goto out; - rc = tcon->ses->server->ops->create_mf_symlink(xid, tcon, cifs_sb, - fromName, buf, &bytes_written); + if (tcon->ses->server->ops->create_mf_symlink) + rc = tcon->ses->server->ops->create_mf_symlink(xid, tcon, + cifs_sb, fromName, buf, &bytes_written); + else + rc = -EOPNOTSUPP; + if (rc) goto out; -- cgit v1.2.3 From d6bb3e9075bbcf758d6084bb581f797bb6ea24c6 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 15 Sep 2014 10:51:07 -0700 Subject: vfs: simplify and shrink stack frame of link_path_walk() Commit 9226b5b440f2 ("vfs: avoid non-forwarding large load after small store in path lookup") made link_path_walk() always access the "hash_len" field as a single 64-bit entity, in order to avoid mixed size accesses to the members. However, what I didn't notice was that that effectively means that the whole "struct qstr this" is now basically redundant. We already explicitly track the "const char *name", and if we just use "u64 hash_len" instead of "long len", there is nothing else left of the "struct qstr". We do end up wanting the "struct qstr" if we have a filesystem with a "d_hash()" function, but that's a rare case, and we might as well then just squirrell away the name and hash_len at that point. End result: fewer live variables in the loop, a smaller stack frame, and better code generation. And we don't need to pass in pointers variables to helper functions any more, because the return value contains all the relevant information. So this removes more lines than it adds, and the source code is clearer too. Signed-off-by: Linus Torvalds --- fs/namei.c | 39 ++++++++++++++++++--------------------- 1 file changed, 18 insertions(+), 21 deletions(-) diff --git a/fs/namei.c b/fs/namei.c index 215e44254c53..01d03892316c 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -1674,14 +1674,13 @@ EXPORT_SYMBOL(full_name_hash); /* * Calculate the length and hash of the path component, and - * fill in the qstr. return the "len" as the result. + * return the "hash_len" as the result. */ -static inline unsigned long hash_name(const char *name, struct qstr *res) +static inline u64 hash_name(const char *name) { unsigned long a, b, adata, bdata, mask, hash, len; const struct word_at_a_time constants = WORD_AT_A_TIME_CONSTANTS; - res->name = name; hash = a = 0; len = -sizeof(unsigned long); do { @@ -1698,9 +1697,7 @@ static inline unsigned long hash_name(const char *name, struct qstr *res) hash += a & zero_bytemask(mask); len += find_zero(mask); - res->hash_len = hashlen_create(fold_hash(hash), len); - - return len; + return hashlen_create(fold_hash(hash), len); } #else @@ -1718,20 +1715,18 @@ EXPORT_SYMBOL(full_name_hash); * We know there's a real path component here of at least * one character. */ -static inline long hash_name(const char *name, struct qstr *res) +static inline u64 hash_name(const char *name) { unsigned long hash = init_name_hash(); unsigned long len = 0, c; - res->name = name; c = (unsigned char)*name; do { len++; hash = partial_name_hash(c, hash); c = (unsigned char)name[len]; } while (c && c != '/'); - res->hash_len = hashlen_create(end_name_hash(hash), len); - return len; + return hashlen_create(end_name_hash(hash), len); } #endif @@ -1756,18 +1751,17 @@ static int link_path_walk(const char *name, struct nameidata *nd) /* At this point we know we have a real path component. */ for(;;) { - struct qstr this; - long len; + u64 hash_len; int type; err = may_lookup(nd); if (err) break; - len = hash_name(name, &this); + hash_len = hash_name(name); type = LAST_NORM; - if (name[0] == '.') switch (len) { + if (name[0] == '.') switch (hashlen_len(hash_len)) { case 2: if (name[1] == '.') { type = LAST_DOTDOT; @@ -1781,29 +1775,32 @@ static int link_path_walk(const char *name, struct nameidata *nd) struct dentry *parent = nd->path.dentry; nd->flags &= ~LOOKUP_JUMPED; if (unlikely(parent->d_flags & DCACHE_OP_HASH)) { + struct qstr this = { .hash_len = hash_len, .name = name }; err = parent->d_op->d_hash(parent, &this); if (err < 0) break; + hash_len = this.hash_len; + name = this.name; } } - nd->last = this; + nd->last.hash_len = hash_len; + nd->last.name = name; nd->last_type = type; - if (!name[len]) + name += hashlen_len(hash_len); + if (!*name) return 0; /* * If it wasn't NUL, we know it was '/'. Skip that * slash, and continue until no more slashes. */ do { - len++; - } while (unlikely(name[len] == '/')); - if (!name[len]) + name++; + } while (unlikely(*name == '/')); + if (!*name) return 0; - name += len; - err = walk_component(nd, &next, LOOKUP_FOLLOW); if (err < 0) return err; -- cgit v1.2.3 From f3b5933190c1fc5ad8f3a1dec594e9e849e088c0 Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Mon, 15 Sep 2014 09:32:23 -0700 Subject: ia64: Fix syscall number for memfd_create Cut & paste typo from the line above. Reported-by: Ben Hutchings Signed-off-by: Tony Luck Signed-off-by: Linus Torvalds --- arch/ia64/include/uapi/asm/unistd.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/ia64/include/uapi/asm/unistd.h b/arch/ia64/include/uapi/asm/unistd.h index 6a65bb7d0657..18026b2eb582 100644 --- a/arch/ia64/include/uapi/asm/unistd.h +++ b/arch/ia64/include/uapi/asm/unistd.h @@ -329,6 +329,6 @@ #define __NR_sched_getattr 1337 #define __NR_renameat2 1338 #define __NR_getrandom 1339 -#define __NR_memfd_create 1339 +#define __NR_memfd_create 1340 #endif /* _UAPI_ASM_IA64_UNISTD_H */ -- cgit v1.2.3 From f91ce35e471ae17552ce7bfe355cfd997e3ad781 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Wed, 10 Sep 2014 15:30:08 -0600 Subject: ACPIPHP / radeon / nouveau: Remove acpi_bus_no_hotplug() Revert parts of f244d8b623da ("ACPIPHP / radeon / nouveau: Fix VGA switcheroo problem related to hotplug"). A previous commit 5493b31f0b55 ("PCI: Add pci_ignore_hotplug() to ignore hotplug events for a device") added equivalent functionality implemented in a different way for both acpiphp and pciehp. Signed-off-by: Bjorn Helgaas Acked-by: Alex Deucher Acked-by: Rafael J. Wysocki Acked-by: Dave Airlie Acked-by: Rajat Jain --- drivers/acpi/bus.c | 10 ---------- drivers/gpu/drm/nouveau/nouveau_acpi.c | 16 ++-------------- drivers/gpu/drm/radeon/radeon_atpx_handler.c | 16 ++-------------- include/acpi/acpi_bus.h | 4 +--- 4 files changed, 5 insertions(+), 41 deletions(-) diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index 8581f5b84f48..8b67bd0f6bb5 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -177,16 +177,6 @@ void acpi_bus_detach_private_data(acpi_handle handle) } EXPORT_SYMBOL_GPL(acpi_bus_detach_private_data); -void acpi_bus_no_hotplug(acpi_handle handle) -{ - struct acpi_device *adev = NULL; - - acpi_bus_get_device(handle, &adev); - if (adev) - adev->flags.no_hotplug = true; -} -EXPORT_SYMBOL_GPL(acpi_bus_no_hotplug); - static void acpi_print_osc_error(acpi_handle handle, struct acpi_osc_context *context, char *error) { diff --git a/drivers/gpu/drm/nouveau/nouveau_acpi.c b/drivers/gpu/drm/nouveau/nouveau_acpi.c index 279206997e5c..622424692b3b 100644 --- a/drivers/gpu/drm/nouveau/nouveau_acpi.c +++ b/drivers/gpu/drm/nouveau/nouveau_acpi.c @@ -46,7 +46,6 @@ static struct nouveau_dsm_priv { bool dsm_detected; bool optimus_detected; acpi_handle dhandle; - acpi_handle other_handle; acpi_handle rom_handle; } nouveau_dsm_priv; @@ -222,10 +221,9 @@ static int nouveau_dsm_pci_probe(struct pci_dev *pdev) if (!dhandle) return false; - if (!acpi_has_method(dhandle, "_DSM")) { - nouveau_dsm_priv.other_handle = dhandle; + if (!acpi_has_method(dhandle, "_DSM")) return false; - } + if (acpi_check_dsm(dhandle, nouveau_dsm_muid, 0x00000102, 1 << NOUVEAU_DSM_POWER)) retval |= NOUVEAU_DSM_HAS_MUX; @@ -301,16 +299,6 @@ static bool nouveau_dsm_detect(void) printk(KERN_INFO "VGA switcheroo: detected DSM switching method %s handle\n", acpi_method_name); nouveau_dsm_priv.dsm_detected = true; - /* - * On some systems hotplug events are generated for the device - * being switched off when _DSM is executed. They cause ACPI - * hotplug to trigger and attempt to remove the device from - * the system, which causes it to break down. Prevent that from - * happening by setting the no_hotplug flag for the involved - * ACPI device objects. - */ - acpi_bus_no_hotplug(nouveau_dsm_priv.dhandle); - acpi_bus_no_hotplug(nouveau_dsm_priv.other_handle); ret = true; } diff --git a/drivers/gpu/drm/radeon/radeon_atpx_handler.c b/drivers/gpu/drm/radeon/radeon_atpx_handler.c index a9fb0d016d38..8bc7d0bbd3c8 100644 --- a/drivers/gpu/drm/radeon/radeon_atpx_handler.c +++ b/drivers/gpu/drm/radeon/radeon_atpx_handler.c @@ -33,7 +33,6 @@ static struct radeon_atpx_priv { bool atpx_detected; /* handle for device - and atpx */ acpi_handle dhandle; - acpi_handle other_handle; struct radeon_atpx atpx; } radeon_atpx_priv; @@ -453,10 +452,9 @@ static bool radeon_atpx_pci_probe_handle(struct pci_dev *pdev) return false; status = acpi_get_handle(dhandle, "ATPX", &atpx_handle); - if (ACPI_FAILURE(status)) { - radeon_atpx_priv.other_handle = dhandle; + if (ACPI_FAILURE(status)) return false; - } + radeon_atpx_priv.dhandle = dhandle; radeon_atpx_priv.atpx.handle = atpx_handle; return true; @@ -540,16 +538,6 @@ static bool radeon_atpx_detect(void) printk(KERN_INFO "VGA switcheroo: detected switching method %s handle\n", acpi_method_name); radeon_atpx_priv.atpx_detected = true; - /* - * On some systems hotplug events are generated for the device - * being switched off when ATPX is executed. They cause ACPI - * hotplug to trigger and attempt to remove the device from - * the system, which causes it to break down. Prevent that from - * happening by setting the no_hotplug flag for the involved - * ACPI device objects. - */ - acpi_bus_no_hotplug(radeon_atpx_priv.dhandle); - acpi_bus_no_hotplug(radeon_atpx_priv.other_handle); return true; } return false; diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h index bcfd808b1098..95c506961a13 100644 --- a/include/acpi/acpi_bus.h +++ b/include/acpi/acpi_bus.h @@ -204,10 +204,9 @@ struct acpi_device_flags { u32 match_driver:1; u32 initialized:1; u32 visited:1; - u32 no_hotplug:1; u32 hotplug_notify:1; u32 is_dock_station:1; - u32 reserved:22; + u32 reserved:23; }; /* File System */ @@ -412,7 +411,6 @@ void acpi_bus_private_data_handler(acpi_handle, void *); int acpi_bus_get_private_data(acpi_handle, void **); int acpi_bus_attach_private_data(acpi_handle, void *); void acpi_bus_detach_private_data(acpi_handle); -void acpi_bus_no_hotplug(acpi_handle handle); extern int acpi_notifier_call_chain(struct acpi_device *, u32, u32); extern int register_acpi_notifier(struct notifier_block *); extern int unregister_acpi_notifier(struct notifier_block *); -- cgit v1.2.3 From c2f88b17a1d97ca4ecd96cc22333a7a4f1407d39 Mon Sep 17 00:00:00 2001 From: Sagi Grimberg Date: Wed, 2 Jul 2014 16:19:24 +0300 Subject: Target/iser: Get isert_conn reference once got to connected_handler In case the connection didn't reach connected state, disconnected handler will never be invoked thus the second kref_put on isert_conn will be missing. Signed-off-by: Sagi Grimberg Cc: # v3.10+ Signed-off-by: Nicholas Bellinger --- drivers/infiniband/ulp/isert/ib_isert.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/infiniband/ulp/isert/ib_isert.c b/drivers/infiniband/ulp/isert/ib_isert.c index d4c7928a0f36..e318731ffe98 100644 --- a/drivers/infiniband/ulp/isert/ib_isert.c +++ b/drivers/infiniband/ulp/isert/ib_isert.c @@ -586,7 +586,6 @@ isert_connect_request(struct rdma_cm_id *cma_id, struct rdma_cm_event *event) init_completion(&isert_conn->conn_wait); init_completion(&isert_conn->conn_wait_comp_err); kref_init(&isert_conn->conn_kref); - kref_get(&isert_conn->conn_kref); mutex_init(&isert_conn->conn_mutex); spin_lock_init(&isert_conn->conn_lock); INIT_LIST_HEAD(&isert_conn->conn_fr_pool); @@ -746,7 +745,9 @@ isert_connect_release(struct isert_conn *isert_conn) static void isert_connected_handler(struct rdma_cm_id *cma_id) { - return; + struct isert_conn *isert_conn = cma_id->context; + + kref_get(&isert_conn->conn_kref); } static void -- cgit v1.2.3 From 0fc4ea701fcf5bc51ace4e288af5be741465f776 Mon Sep 17 00:00:00 2001 From: Sagi Grimberg Date: Wed, 2 Jul 2014 16:19:25 +0300 Subject: Target/iser: Don't put isert_conn inside disconnected handler disconnected_handler is invoked on several CM events (such as DISCONNECTED, DEVICE_REMOVAL, TIMEWAIT_EXIT...). Since multiple events can occur while before isert_free_conn is invoked, we might put all isert_conn references and free the connection too early. Signed-off-by: Sagi Grimberg Cc: # v3.10+ Signed-off-by: Nicholas Bellinger --- drivers/infiniband/ulp/isert/ib_isert.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/ulp/isert/ib_isert.c b/drivers/infiniband/ulp/isert/ib_isert.c index e318731ffe98..9959cd1faad9 100644 --- a/drivers/infiniband/ulp/isert/ib_isert.c +++ b/drivers/infiniband/ulp/isert/ib_isert.c @@ -799,7 +799,6 @@ isert_disconnect_work(struct work_struct *work) wake_up: complete(&isert_conn->conn_wait); - isert_put_conn(isert_conn); } static void @@ -3235,6 +3234,7 @@ static void isert_wait_conn(struct iscsi_conn *conn) wait_for_completion(&isert_conn->conn_wait_comp_err); wait_for_completion(&isert_conn->conn_wait); + isert_put_conn(isert_conn); } static void isert_free_conn(struct iscsi_conn *conn) -- cgit v1.2.3 From 38a8316b5d80ddee071d493bae567185c07de359 Mon Sep 17 00:00:00 2001 From: Sagi Grimberg Date: Wed, 2 Jul 2014 16:19:26 +0300 Subject: Target/iser: Avoid calling rdma_disconnect twice rdma_disconnect may be called in 2 code flows: - isert_wait_conn: disconnect initiated be the target - disconnected_handler: disconnect invoked by the initiator In case isert_conn->disconnect is true then rdma_disconnect was called in disconnected handler, no need to call it again from isert_wait_conn. Signed-off-by: Sagi Grimberg Signed-off-by: Nicholas Bellinger --- drivers/infiniband/ulp/isert/ib_isert.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/ulp/isert/ib_isert.c b/drivers/infiniband/ulp/isert/ib_isert.c index 9959cd1faad9..9e21747acce6 100644 --- a/drivers/infiniband/ulp/isert/ib_isert.c +++ b/drivers/infiniband/ulp/isert/ib_isert.c @@ -3215,7 +3215,7 @@ static void isert_wait_conn(struct iscsi_conn *conn) pr_debug("isert_wait_conn: Starting \n"); mutex_lock(&isert_conn->conn_mutex); - if (isert_conn->conn_cm_id) { + if (isert_conn->conn_cm_id && !isert_conn->disconnect) { pr_debug("Calling rdma_disconnect from isert_wait_conn\n"); rdma_disconnect(isert_conn->conn_cm_id); } -- cgit v1.2.3 From 1a92e17e39b9a5d476e0a7aa52280e76321834ee Mon Sep 17 00:00:00 2001 From: Sagi Grimberg Date: Thu, 19 Jun 2014 13:54:19 +0300 Subject: Target/iser: Fix initiator_depth and responder_resources The iser target is the RDMA requester and the iser initiator is the RDMA responder. In order to determine the max inflight RDMA READ requests to set on the QP (initiator_depth), it should take the min between the initiator published initiator_depth and the max inflight rdma read requests its local HCA support (max_qp_init_rd_atom). The target will never handle incoming RDMA READ requests so no need to set responder_resources. Signed-off-by: Sagi Grimberg Signed-off-by: Nicholas Bellinger --- drivers/infiniband/ulp/isert/ib_isert.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/infiniband/ulp/isert/ib_isert.c b/drivers/infiniband/ulp/isert/ib_isert.c index 9e21747acce6..da8ff124762a 100644 --- a/drivers/infiniband/ulp/isert/ib_isert.c +++ b/drivers/infiniband/ulp/isert/ib_isert.c @@ -592,10 +592,6 @@ isert_connect_request(struct rdma_cm_id *cma_id, struct rdma_cm_event *event) cma_id->context = isert_conn; isert_conn->conn_cm_id = cma_id; - isert_conn->responder_resources = event->param.conn.responder_resources; - isert_conn->initiator_depth = event->param.conn.initiator_depth; - pr_debug("Using responder_resources: %u initiator_depth: %u\n", - isert_conn->responder_resources, isert_conn->initiator_depth); isert_conn->login_buf = kzalloc(ISCSI_DEF_MAX_RECV_SEG_LEN + ISER_RX_LOGIN_SIZE, GFP_KERNEL); @@ -642,6 +638,12 @@ isert_connect_request(struct rdma_cm_id *cma_id, struct rdma_cm_event *event) goto out_rsp_dma_map; } + /* Set max inflight RDMA READ requests */ + isert_conn->initiator_depth = min_t(u8, + event->param.conn.initiator_depth, + device->dev_attr.max_qp_init_rd_atom); + pr_debug("Using initiator_depth: %u\n", isert_conn->initiator_depth); + isert_conn->conn_device = device; isert_conn->conn_pd = ib_alloc_pd(isert_conn->conn_device->ib_device); if (IS_ERR(isert_conn->conn_pd)) { @@ -3067,7 +3069,6 @@ isert_rdma_accept(struct isert_conn *isert_conn) int ret; memset(&cp, 0, sizeof(struct rdma_conn_param)); - cp.responder_resources = isert_conn->responder_resources; cp.initiator_depth = isert_conn->initiator_depth; cp.retry_count = 7; cp.rnr_retry_count = 7; -- cgit v1.2.3 From 3687db882d8ec8f0792603ff00c2e80d791e49e8 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Mon, 7 Jul 2014 18:25:04 -0700 Subject: iscsi-target: Ignore ICF_GOT_LAST_DATAOUT during Data-Out ITT lookup This patch adds a explicit check in iscsit_find_cmd_from_itt_or_dump() to ignore commands with ICF_GOT_LAST_DATAOUT set. This is done to address the case where an ITT is being reused for DataOUT, but the previous command with the same ITT has not yet been acknowledged by ExpStatSN and removed from the per connection command list. This issue was originally manifesting itself by referencing the previous command during ITT lookup, and subsequently hitting the check in iscsit_check_dataout_hdr() for ICF_GOT_LAST_DATAOUT, that resulted in the DataOUT PDU + associated payload being silently dumped. Reported-by: Arshad Hussain Tested-by: Arshad Hussain Signed-off-by: Nicholas Bellinger --- drivers/target/iscsi/iscsi_target_util.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/target/iscsi/iscsi_target_util.c b/drivers/target/iscsi/iscsi_target_util.c index fd90b28f1d94..73355f4fca74 100644 --- a/drivers/target/iscsi/iscsi_target_util.c +++ b/drivers/target/iscsi/iscsi_target_util.c @@ -400,6 +400,8 @@ struct iscsi_cmd *iscsit_find_cmd_from_itt_or_dump( spin_lock_bh(&conn->cmd_lock); list_for_each_entry(cmd, &conn->conn_cmd_list, i_conn_node) { + if (cmd->cmd_flags & ICF_GOT_LAST_DATAOUT) + continue; if (cmd->init_task_tag == init_task_tag) { spin_unlock_bh(&conn->cmd_lock); return cmd; -- cgit v1.2.3 From a5c3e1c725af9e84deceb3c33939ca4ffe3fefc8 Mon Sep 17 00:00:00 2001 From: Steve French Date: Tue, 16 Sep 2014 04:16:19 -0500 Subject: Revert "cifs: No need to send SIGKILL to demux_thread during umount" This reverts commit 52a36244443eabb594bdb63622ff2dd7a083f0e2. Causes rmmod to fail for at least 7 seconds after unmount which makes automated testing a little harder when reloading cifs.ko between test runs. Signed-off-by: Namjae Jeon CC: Jeff Layton Signed-off-by: Steve French --- fs/cifs/connect.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 8a9fded7c135..36ca2045009b 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -837,6 +837,7 @@ cifs_demultiplex_thread(void *p) struct TCP_Server_Info *server = p; unsigned int pdu_length; char *buf = NULL; + struct task_struct *task_to_wake = NULL; struct mid_q_entry *mid_entry; current->flags |= PF_MEMALLOC; @@ -927,7 +928,19 @@ cifs_demultiplex_thread(void *p) if (server->smallbuf) /* no sense logging a debug message if NULL */ cifs_small_buf_release(server->smallbuf); + task_to_wake = xchg(&server->tsk, NULL); clean_demultiplex_info(server); + + /* if server->tsk was NULL then wait for a signal before exiting */ + if (!task_to_wake) { + set_current_state(TASK_INTERRUPTIBLE); + while (!signal_pending(current)) { + schedule(); + set_current_state(TASK_INTERRUPTIBLE); + } + set_current_state(TASK_RUNNING); + } + module_put_and_exit(0); } @@ -2050,6 +2063,8 @@ cifs_find_tcp_session(struct smb_vol *vol) static void cifs_put_tcp_session(struct TCP_Server_Info *server) { + struct task_struct *task; + spin_lock(&cifs_tcp_ses_lock); if (--server->srv_count > 0) { spin_unlock(&cifs_tcp_ses_lock); @@ -2073,6 +2088,10 @@ cifs_put_tcp_session(struct TCP_Server_Info *server) kfree(server->session_key.response); server->session_key.response = NULL; server->session_key.len = 0; + + task = xchg(&server->tsk, NULL); + if (task) + force_sig(SIGKILL, task); } static struct TCP_Server_Info * -- cgit v1.2.3 From 116ae5e2b09f7022281c253a6037a74d0446bfaf Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 8 Sep 2014 17:20:56 +0200 Subject: cifs: remove dead code cifs provides two dummy functions 'sess_auth_lanman' and 'sess_auth_kerberos' for the case in which the respective features are not defined. However, the caller is also under an #ifdef, so we just get warnings about unused code: fs/cifs/sess.c:1109:1: warning: 'sess_auth_kerberos' defined but not used [-Wunused-function] sess_auth_kerberos(struct sess_data *sess_data) Removing the dead functions gets rid of the warnings without any downsides that I can see. (Yalin Wang reported the identical problem and fix so added him) Signed-off-by: Arnd Bergmann Signed-off-by: Yalin Wang Signed-off-by: Steve French --- fs/cifs/sess.c | 17 ----------------- 1 file changed, 17 deletions(-) diff --git a/fs/cifs/sess.c b/fs/cifs/sess.c index 3a5e83317683..57db63ff88da 100644 --- a/fs/cifs/sess.c +++ b/fs/cifs/sess.c @@ -745,14 +745,6 @@ out: sess_free_buffer(sess_data); } -#else - -static void -sess_auth_lanman(struct sess_data *sess_data) -{ - sess_data->result = -EOPNOTSUPP; - sess_data->func = NULL; -} #endif static void @@ -1103,15 +1095,6 @@ out: ses->auth_key.response = NULL; } -#else - -static void -sess_auth_kerberos(struct sess_data *sess_data) -{ - cifs_dbg(VFS, "Kerberos negotiated but upcall support disabled!\n"); - sess_data->result = -ENOSYS; - sess_data->func = NULL; -} #endif /* ! CONFIG_CIFS_UPCALL */ /* -- cgit v1.2.3 From 69af38dbc5b44e90dde35af4a1df3f5510809a1a Mon Sep 17 00:00:00 2001 From: Steve French Date: Tue, 16 Sep 2014 04:13:31 -0500 Subject: Update version number displayed by modinfo for cifs.ko Update cifs.ko version to 2.05 Signed-off-by: Steve French w --- fs/cifs/cifsfs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/cifs/cifsfs.h b/fs/cifs/cifsfs.h index b0fafa499505..002e0c173939 100644 --- a/fs/cifs/cifsfs.h +++ b/fs/cifs/cifsfs.h @@ -136,5 +136,5 @@ extern long cifs_ioctl(struct file *filep, unsigned int cmd, unsigned long arg); extern const struct export_operations cifs_export_ops; #endif /* CONFIG_CIFS_NFSD_EXPORT */ -#define CIFS_VERSION "2.04" +#define CIFS_VERSION "2.05" #endif /* _CIFSFS_H */ -- cgit v1.2.3 From 364d42930d96a872b2076deeb9c24f9ff132de34 Mon Sep 17 00:00:00 2001 From: Steve French Date: Tue, 16 Sep 2014 06:40:25 -0500 Subject: Fix mfsymlinks file size check If the mfsymlinks file size has changed (e.g. the file no longer represents an emulated symlink) we were not returning an error properly. Signed-off-by: Steve French Reviewed-by: Stefan Metzmacher --- fs/cifs/link.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/cifs/link.c b/fs/cifs/link.c index a5c2812ead68..5657416d3483 100644 --- a/fs/cifs/link.c +++ b/fs/cifs/link.c @@ -343,9 +343,11 @@ cifs_query_mf_symlink(unsigned int xid, struct cifs_tcon *tcon, if (rc) return rc; - if (file_info.EndOfFile != cpu_to_le64(CIFS_MF_SYMLINK_FILE_SIZE)) + if (file_info.EndOfFile != cpu_to_le64(CIFS_MF_SYMLINK_FILE_SIZE)) { + rc = -ENOENT; /* it's not a symlink */ goto out; + } io_parms.netfid = fid.netfid; io_parms.pid = current->tgid; -- cgit v1.2.3 From a060dc5010ffa32f3a83e5336f6eeb6551fa137a Mon Sep 17 00:00:00 2001 From: James Hogan Date: Tue, 16 Sep 2014 13:07:35 +0100 Subject: vfs: workaround gcc <4.6 build error in link_path_walk() Commit d6bb3e9075bb ("vfs: simplify and shrink stack frame of link_path_walk()") introduced build problems with GCC versions older than 4.6 due to the initialisation of a member of an anonymous union in struct qstr without enclosing braces. This hits GCC bug 10676 [1] (which was fixed in GCC 4.6 by [2]), and causes the following build error: fs/namei.c: In function 'link_path_walk': fs/namei.c:1778: error: unknown field 'hash_len' specified in initializer This is worked around by adding explicit braces. [1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=10676 [2] https://gcc.gnu.org/viewcvs/gcc?view=revision&revision=159206 Fixes: d6bb3e9075bb (vfs: simplify and shrink stack frame of link_path_walk()) Signed-off-by: James Hogan Cc: Linus Torvalds Cc: Alexander Viro Cc: Geert Uytterhoeven Cc: linux-fsdevel@vger.kernel.org Cc: linux-metag@vger.kernel.org Signed-off-by: Linus Torvalds --- fs/namei.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/namei.c b/fs/namei.c index 01d03892316c..a7b05bf82d31 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -1775,7 +1775,7 @@ static int link_path_walk(const char *name, struct nameidata *nd) struct dentry *parent = nd->path.dentry; nd->flags &= ~LOOKUP_JUMPED; if (unlikely(parent->d_flags & DCACHE_OP_HASH)) { - struct qstr this = { .hash_len = hash_len, .name = name }; + struct qstr this = { { .hash_len = hash_len }, .name = name }; err = parent->d_op->d_hash(parent, &this); if (err < 0) break; -- cgit v1.2.3 From 7a0bd49713aca3040099e1413d1cc9f08802d97a Mon Sep 17 00:00:00 2001 From: Victor Kamensky Date: Sat, 13 Sep 2014 23:29:17 +0100 Subject: ARM: 8151/1: add missing exports for asm functions required by get_user macro Previous commits that dealt with get_user for 64bit type missed to export proper functions, so if get_user macro with particular target/value types are used by kernel module modpost would produce 'undefined!' error. Solution is to export all required functions. Signed-off-by: Victor Kamensky Signed-off-by: Russell King --- arch/arm/kernel/armksyms.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c index f7b450f97e68..a88671cfe1ff 100644 --- a/arch/arm/kernel/armksyms.c +++ b/arch/arm/kernel/armksyms.c @@ -98,6 +98,14 @@ EXPORT_SYMBOL(__clear_user); EXPORT_SYMBOL(__get_user_1); EXPORT_SYMBOL(__get_user_2); EXPORT_SYMBOL(__get_user_4); +EXPORT_SYMBOL(__get_user_8); + +#ifdef __ARMEB__ +EXPORT_SYMBOL(__get_user_64t_1); +EXPORT_SYMBOL(__get_user_64t_2); +EXPORT_SYMBOL(__get_user_64t_4); +EXPORT_SYMBOL(__get_user_32t_8); +#endif EXPORT_SYMBOL(__put_user_1); EXPORT_SYMBOL(__put_user_2); -- cgit v1.2.3 From fbfb872f5f417cea48760c535e0ff027c88b507a Mon Sep 17 00:00:00 2001 From: Nathan Lynch Date: Thu, 11 Sep 2014 02:49:08 +0100 Subject: ARM: 8148/1: flush TLS and thumbee register state during exec The TPIDRURO and TPIDRURW registers need to be flushed during exec; otherwise TLS information is potentially leaked. TPIDRURO in particular needs careful treatment. Since flush_thread basically needs the same code used to set the TLS in arm_syscall, pull that into a common set_tls helper in tls.h and use it in both places. Similarly, TEEHBR needs to be cleared during exec as well. Clearing its save slot in thread_info isn't right as there is no guarantee that a thread switch will occur before the new program runs. Just setting the register directly is sufficient. Signed-off-by: Nathan Lynch Acked-by: Will Deacon Cc: Signed-off-by: Russell King --- arch/arm/include/asm/tls.h | 62 ++++++++++++++++++++++++++++++++++++++++++++++ arch/arm/kernel/process.c | 2 ++ arch/arm/kernel/thumbee.c | 2 +- arch/arm/kernel/traps.c | 17 +------------ 4 files changed, 66 insertions(+), 17 deletions(-) diff --git a/arch/arm/include/asm/tls.h b/arch/arm/include/asm/tls.h index 83259b873333..36172adda9d0 100644 --- a/arch/arm/include/asm/tls.h +++ b/arch/arm/include/asm/tls.h @@ -1,6 +1,9 @@ #ifndef __ASMARM_TLS_H #define __ASMARM_TLS_H +#include +#include + #ifdef __ASSEMBLY__ #include .macro switch_tls_none, base, tp, tpuser, tmp1, tmp2 @@ -50,6 +53,47 @@ #endif #ifndef __ASSEMBLY__ + +static inline void set_tls(unsigned long val) +{ + struct thread_info *thread; + + thread = current_thread_info(); + + thread->tp_value[0] = val; + + /* + * This code runs with preemption enabled and therefore must + * be reentrant with respect to switch_tls. + * + * We need to ensure ordering between the shadow state and the + * hardware state, so that we don't corrupt the hardware state + * with a stale shadow state during context switch. + * + * If we're preempted here, switch_tls will load TPIDRURO from + * thread_info upon resuming execution and the following mcr + * is merely redundant. + */ + barrier(); + + if (!tls_emu) { + if (has_tls_reg) { + asm("mcr p15, 0, %0, c13, c0, 3" + : : "r" (val)); + } else { + /* + * User space must never try to access this + * directly. Expect your app to break + * eventually if you do so. The user helper + * at 0xffff0fe0 must be used instead. (see + * entry-armv.S for details) + */ + *((unsigned int *)0xffff0ff0) = val; + } + + } +} + static inline unsigned long get_tpuser(void) { unsigned long reg = 0; @@ -59,5 +103,23 @@ static inline unsigned long get_tpuser(void) return reg; } + +static inline void set_tpuser(unsigned long val) +{ + /* Since TPIDRURW is fully context-switched (unlike TPIDRURO), + * we need not update thread_info. + */ + if (has_tls_reg && !tls_emu) { + asm("mcr p15, 0, %0, c13, c0, 2" + : : "r" (val)); + } +} + +static inline void flush_tls(void) +{ + set_tls(0); + set_tpuser(0); +} + #endif #endif /* __ASMARM_TLS_H */ diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 81ef686a91ca..a35f6ebbd2c2 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -334,6 +334,8 @@ void flush_thread(void) memset(&tsk->thread.debug, 0, sizeof(struct debug_info)); memset(&thread->fpstate, 0, sizeof(union fp_state)); + flush_tls(); + thread_notify(THREAD_NOTIFY_FLUSH, thread); } diff --git a/arch/arm/kernel/thumbee.c b/arch/arm/kernel/thumbee.c index 7b8403b76666..80f0d69205e7 100644 --- a/arch/arm/kernel/thumbee.c +++ b/arch/arm/kernel/thumbee.c @@ -45,7 +45,7 @@ static int thumbee_notifier(struct notifier_block *self, unsigned long cmd, void switch (cmd) { case THREAD_NOTIFY_FLUSH: - thread->thumbee_state = 0; + teehbr_write(0); break; case THREAD_NOTIFY_SWITCH: current_thread_info()->thumbee_state = teehbr_read(); diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index c8e4bb714944..a964c9f40f87 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -581,7 +581,6 @@ do_cache_op(unsigned long start, unsigned long end, int flags) #define NR(x) ((__ARM_NR_##x) - __ARM_NR_BASE) asmlinkage int arm_syscall(int no, struct pt_regs *regs) { - struct thread_info *thread = current_thread_info(); siginfo_t info; if ((no >> 16) != (__ARM_NR_BASE>> 16)) @@ -632,21 +631,7 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs) return regs->ARM_r0; case NR(set_tls): - thread->tp_value[0] = regs->ARM_r0; - if (tls_emu) - return 0; - if (has_tls_reg) { - asm ("mcr p15, 0, %0, c13, c0, 3" - : : "r" (regs->ARM_r0)); - } else { - /* - * User space must never try to access this directly. - * Expect your app to break eventually if you do so. - * The user helper at 0xffff0fe0 must be used instead. - * (see entry-armv.S for details) - */ - *((unsigned int *)0xffff0ff0) = regs->ARM_r0; - } + set_tls(regs->ARM_r0); return 0; #ifdef CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG -- cgit v1.2.3 From 505013bc9065391f09a51d51cd3bf0b06dfb570a Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Thu, 11 Sep 2014 23:25:30 +0100 Subject: ARM: 8149/1: perf: Don't sleep while atomic when enabling per-cpu interrupts Rob Clark reports a sleeping while atomic bug when using perf. BUG: sleeping function called from invalid context at ../kernel/locking/mutex.c:583 in_atomic(): 1, irqs_disabled(): 128, pid: 0, name: swapper/0 ------------[ cut here ]------------ WARNING: CPU: 2 PID: 4828 at ../kernel/locking/mutex.c:479 mutex_lock_nested+0x3a0/0x3e8() DEBUG_LOCKS_WARN_ON(in_interrupt()) Modules linked in: CPU: 2 PID: 4828 Comm: Xorg.bin Tainted: G W 3.17.0-rc3-00234-gd535c45-dirty #819 [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [] (show_stack) from [] (dump_stack+0x98/0xb8) [] (dump_stack) from [] (warn_slowpath_common+0x70/0x8c) [] (warn_slowpath_common) from [] (warn_slowpath_fmt+0x30/0x40) [] (warn_slowpath_fmt) from [] (mutex_lock_nested+0x3a0/0x3e8) [] (mutex_lock_nested) from [] (irq_find_host+0x20/0x9c) [] (irq_find_host) from [] (of_irq_get+0x28/0x48) [] (of_irq_get) from [] (platform_get_irq+0x1c/0x8c) [] (platform_get_irq) from [] (cpu_pmu_enable_percpu_irq+0x14/0x38) [] (cpu_pmu_enable_percpu_irq) from [] (flush_smp_call_function_queue+0x88/0x178) [] (flush_smp_call_function_queue) from [] (handle_IPI+0x88/0x160) [] (handle_IPI) from [] (gic_handle_irq+0x64/0x68) [] (gic_handle_irq) from [] (__irq_svc+0x44/0x5c) Exception stack(0xe63ddea0 to 0xe63ddee8) dea0: 00000001 00000001 00000000 c2f3b200 c16db380 c032d4a0 e63ddf40 60010013 dec0: 00000000 001fbfd4 00000100 00000000 00000001 e63ddee8 c0284770 c02a2e30 dee0: 20010013 ffffffff [] (__irq_svc) from [] (ktime_get_ts64+0x1c8/0x200) [] (ktime_get_ts64) from [] (poll_select_set_timeout+0x60/0xa8) [] (poll_select_set_timeout) from [] (SyS_select+0xa8/0x118) [] (SyS_select) from [] (ret_fast_syscall+0x0/0x48) ---[ end trace 0bb583b46342da6f ]--- INFO: lockdep is turned off. We don't really need to get the platform irq again when we're enabling or disabling the per-cpu irq. Furthermore, we don't really need to set and clear bits in the active_irqs bitmask because that's only used in the non-percpu irq case to figure out when the last CPU PMU has been disabled. Just pass the irq directly to the enable/disable functions to clean all this up. This should be slightly more efficient and also fix the scheduling while atomic bug. Fixes: bbd64559376f "ARM: perf: support percpu irqs for the CPU PMU" Reported-by: Rob Clark Acked-by: Will Deacon Cc: stable@vger.kernel.org Signed-off-by: Stephen Boyd Signed-off-by: Russell King --- arch/arm/kernel/perf_event_cpu.c | 14 ++++---------- 1 file changed, 4 insertions(+), 10 deletions(-) diff --git a/arch/arm/kernel/perf_event_cpu.c b/arch/arm/kernel/perf_event_cpu.c index e6a6edbec613..4bf4cce759fe 100644 --- a/arch/arm/kernel/perf_event_cpu.c +++ b/arch/arm/kernel/perf_event_cpu.c @@ -76,21 +76,15 @@ static struct pmu_hw_events *cpu_pmu_get_cpu_events(void) static void cpu_pmu_enable_percpu_irq(void *data) { - struct arm_pmu *cpu_pmu = data; - struct platform_device *pmu_device = cpu_pmu->plat_device; - int irq = platform_get_irq(pmu_device, 0); + int irq = *(int *)data; enable_percpu_irq(irq, IRQ_TYPE_NONE); - cpumask_set_cpu(smp_processor_id(), &cpu_pmu->active_irqs); } static void cpu_pmu_disable_percpu_irq(void *data) { - struct arm_pmu *cpu_pmu = data; - struct platform_device *pmu_device = cpu_pmu->plat_device; - int irq = platform_get_irq(pmu_device, 0); + int irq = *(int *)data; - cpumask_clear_cpu(smp_processor_id(), &cpu_pmu->active_irqs); disable_percpu_irq(irq); } @@ -103,7 +97,7 @@ static void cpu_pmu_free_irq(struct arm_pmu *cpu_pmu) irq = platform_get_irq(pmu_device, 0); if (irq >= 0 && irq_is_percpu(irq)) { - on_each_cpu(cpu_pmu_disable_percpu_irq, cpu_pmu, 1); + on_each_cpu(cpu_pmu_disable_percpu_irq, &irq, 1); free_percpu_irq(irq, &percpu_pmu); } else { for (i = 0; i < irqs; ++i) { @@ -138,7 +132,7 @@ static int cpu_pmu_request_irq(struct arm_pmu *cpu_pmu, irq_handler_t handler) irq); return err; } - on_each_cpu(cpu_pmu_enable_percpu_irq, cpu_pmu, 1); + on_each_cpu(cpu_pmu_enable_percpu_irq, &irq, 1); } else { for (i = 0; i < irqs; ++i) { err = 0; -- cgit v1.2.3 From 6e7488f8f6f68218bd52283f78f571466280ac96 Mon Sep 17 00:00:00 2001 From: Grygorii Strashko Date: Tue, 16 Sep 2014 14:14:23 +0300 Subject: spi: davinci: remove empty function davinci_spi_cleanup Remove empty function davinci_spi_cleanup(). Signed-off-by: Grygorii Strashko Signed-off-by: Mark Brown --- drivers/spi/spi-davinci.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/spi/spi-davinci.c b/drivers/spi/spi-davinci.c index ff54f73dce4b..84a9fb1ab984 100644 --- a/drivers/spi/spi-davinci.c +++ b/drivers/spi/spi-davinci.c @@ -436,10 +436,6 @@ static int davinci_spi_setup(struct spi_device *spi) return retval; } -static void davinci_spi_cleanup(struct spi_device *spi) -{ -} - static int davinci_spi_check_error(struct davinci_spi *dspi, int int_status) { struct device *sdev = dspi->bitbang.master->dev.parent; @@ -951,7 +947,6 @@ static int davinci_spi_probe(struct platform_device *pdev) master->num_chipselect = pdata->num_chipselect; master->bits_per_word_mask = SPI_BPW_RANGE_MASK(2, 16); master->setup = davinci_spi_setup; - master->cleanup = davinci_spi_cleanup; dspi->bitbang.chipselect = davinci_spi_chipselect; dspi->bitbang.setup_transfer = davinci_spi_setup_transfer; -- cgit v1.2.3 From 86fd887b7fe350819dae5b55e7fef05b511c8656 Mon Sep 17 00:00:00 2001 From: Bruno Prémont Date: Sun, 24 Aug 2014 23:09:53 +0200 Subject: vgaarb: Don't default exclusively to first video device with mem+io MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 20cde694027e ("x86, ia64: Move EFI_FB vga_default_device() initialization to pci_vga_fixup()") moved boot video device detection from efifb to x86 and ia64 pci/fixup.c. For dual-GPU Apple computers above change represents a regression as code in efifb did forcefully override vga_default_device while the merge did not (vgaarb happens prior to PCI fixup). To improve on initial device selection by vgaarb (it cannot know if PCI device not behind bridges see/decode legacy VGA I/O or not), move the screen_info based check from pci_video_fixup() to vgaarb's init function and use it to refine/override decision taken while adding the individual PCI VGA devices. This way PCI fixup has no reason to adjust vga_default_device anymore but can depend on its value for flagging shadowed VBIOS. This has the nice benefit of removing duplicated code but does introduce a #if defined() block in vgaarb. Not all architectures have screen_info and would cause compile to fail without it. Link: https://bugzilla.kernel.org/show_bug.cgi?id=84461 Reported-and-Tested-By: Andreas Noever Signed-off-by: Bruno Prémont Signed-off-by: Bjorn Helgaas CC: Matthew Garrett CC: stable@vger.kernel.org # v3.5+ --- arch/ia64/pci/fixup.c | 24 +----------------------- arch/x86/pci/fixup.c | 24 +----------------------- drivers/gpu/vga/vgaarb.c | 38 +++++++++++++++++++++++++++++++++++++- 3 files changed, 39 insertions(+), 47 deletions(-) diff --git a/arch/ia64/pci/fixup.c b/arch/ia64/pci/fixup.c index ec73b2cf912a..fc505d58f078 100644 --- a/arch/ia64/pci/fixup.c +++ b/arch/ia64/pci/fixup.c @@ -38,27 +38,6 @@ static void pci_fixup_video(struct pci_dev *pdev) return; /* Maybe, this machine supports legacy memory map. */ - if (!vga_default_device()) { - resource_size_t start, end; - int i; - - /* Does firmware framebuffer belong to us? */ - for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { - if (!(pci_resource_flags(pdev, i) & IORESOURCE_MEM)) - continue; - - start = pci_resource_start(pdev, i); - end = pci_resource_end(pdev, i); - - if (!start || !end) - continue; - - if (screen_info.lfb_base >= start && - (screen_info.lfb_base + screen_info.lfb_size) < end) - vga_set_default_device(pdev); - } - } - /* Is VGA routed to us? */ bus = pdev->bus; while (bus) { @@ -83,8 +62,7 @@ static void pci_fixup_video(struct pci_dev *pdev) pci_read_config_word(pdev, PCI_COMMAND, &config); if (config & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) { pdev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_SHADOW; - dev_printk(KERN_DEBUG, &pdev->dev, "Boot video device\n"); - vga_set_default_device(pdev); + dev_printk(KERN_DEBUG, &pdev->dev, "Video device with shadowed ROM\n"); } } } diff --git a/arch/x86/pci/fixup.c b/arch/x86/pci/fixup.c index c61ea57d1ba1..9a2b7101ae8a 100644 --- a/arch/x86/pci/fixup.c +++ b/arch/x86/pci/fixup.c @@ -326,27 +326,6 @@ static void pci_fixup_video(struct pci_dev *pdev) struct pci_bus *bus; u16 config; - if (!vga_default_device()) { - resource_size_t start, end; - int i; - - /* Does firmware framebuffer belong to us? */ - for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { - if (!(pci_resource_flags(pdev, i) & IORESOURCE_MEM)) - continue; - - start = pci_resource_start(pdev, i); - end = pci_resource_end(pdev, i); - - if (!start || !end) - continue; - - if (screen_info.lfb_base >= start && - (screen_info.lfb_base + screen_info.lfb_size) < end) - vga_set_default_device(pdev); - } - } - /* Is VGA routed to us? */ bus = pdev->bus; while (bus) { @@ -371,8 +350,7 @@ static void pci_fixup_video(struct pci_dev *pdev) pci_read_config_word(pdev, PCI_COMMAND, &config); if (config & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) { pdev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_SHADOW; - dev_printk(KERN_DEBUG, &pdev->dev, "Boot video device\n"); - vga_set_default_device(pdev); + dev_printk(KERN_DEBUG, &pdev->dev, "Video device with shadowed ROM\n"); } } } diff --git a/drivers/gpu/vga/vgaarb.c b/drivers/gpu/vga/vgaarb.c index d2077f040f3e..24ac52e6cd41 100644 --- a/drivers/gpu/vga/vgaarb.c +++ b/drivers/gpu/vga/vgaarb.c @@ -41,6 +41,7 @@ #include #include #include +#include #include @@ -585,8 +586,11 @@ static bool vga_arbiter_add_pci_device(struct pci_dev *pdev) */ #ifndef __ARCH_HAS_VGA_DEFAULT_DEVICE if (vga_default == NULL && - ((vgadev->owns & VGA_RSRC_LEGACY_MASK) == VGA_RSRC_LEGACY_MASK)) + ((vgadev->owns & VGA_RSRC_LEGACY_MASK) == VGA_RSRC_LEGACY_MASK)) { + pr_info("vgaarb: setting as boot device: PCI:%s\n", + pci_name(pdev)); vga_set_default_device(pdev); + } #endif vga_arbiter_check_bridge_sharing(vgadev); @@ -1320,6 +1324,38 @@ static int __init vga_arb_device_init(void) pr_info("vgaarb: loaded\n"); list_for_each_entry(vgadev, &vga_list, list) { +#if defined(CONFIG_X86) || defined(CONFIG_IA64) + /* Override I/O based detection done by vga_arbiter_add_pci_device() + * as it may take the wrong device (e.g. on Apple system under EFI). + * + * Select the device owning the boot framebuffer if there is one. + */ + resource_size_t start, end; + int i; + + /* Does firmware framebuffer belong to us? */ + for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { + if (!(pci_resource_flags(vgadev->pdev, i) & IORESOURCE_MEM)) + continue; + + start = pci_resource_start(vgadev->pdev, i); + end = pci_resource_end(vgadev->pdev, i); + + if (!start || !end) + continue; + + if (screen_info.lfb_base < start || + (screen_info.lfb_base + screen_info.lfb_size) >= end) + continue; + if (!vga_default_device()) + pr_info("vgaarb: setting as boot device: PCI:%s\n", + pci_name(vgadev->pdev)); + else if (vgadev->pdev != vga_default_device()) + pr_info("vgaarb: overriding boot device: PCI:%s\n", + pci_name(vgadev->pdev)); + vga_set_default_device(vgadev->pdev); + } +#endif if (vgadev->bridge_has_one_vga) pr_info("vgaarb: bridge control possible %s\n", pci_name(vgadev->pdev)); else -- cgit v1.2.3 From ce6eacb07e287c0c3c8b5c316a9a7f9cecf69e95 Mon Sep 17 00:00:00 2001 From: Bruno Prémont Date: Sun, 24 Aug 2014 23:13:15 +0200 Subject: vgaarb: Drop obsolete #ifndef MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 20cde694027e ("x86, ia64: Move EFI_FB vga_default_device() initialization to pci_vga_fixup()") moved boot video device detection from efifb to x86 and ia64 pci/fixup.c. Remove the left-over #ifndef check that will always match since the corresponding arch-specific define is gone with above patch. Signed-off-by: Bruno Prémont Signed-off-by: Bjorn Helgaas CC: Matthew Garrett --- drivers/gpu/vga/vgaarb.c | 8 -------- include/linux/vgaarb.h | 2 -- 2 files changed, 10 deletions(-) diff --git a/drivers/gpu/vga/vgaarb.c b/drivers/gpu/vga/vgaarb.c index 24ac52e6cd41..77711623b973 100644 --- a/drivers/gpu/vga/vgaarb.c +++ b/drivers/gpu/vga/vgaarb.c @@ -113,10 +113,8 @@ both: return 1; } -#ifndef __ARCH_HAS_VGA_DEFAULT_DEVICE /* this is only used a cookie - it should not be dereferenced */ static struct pci_dev *vga_default; -#endif static void vga_arb_device_card_gone(struct pci_dev *pdev); @@ -132,7 +130,6 @@ static struct vga_device *vgadev_find(struct pci_dev *pdev) } /* Returns the default VGA device (vgacon's babe) */ -#ifndef __ARCH_HAS_VGA_DEFAULT_DEVICE struct pci_dev *vga_default_device(void) { return vga_default; @@ -148,7 +145,6 @@ void vga_set_default_device(struct pci_dev *pdev) pci_dev_put(vga_default); vga_default = pci_dev_get(pdev); } -#endif static inline void vga_irq_set_state(struct vga_device *vgadev, bool state) { @@ -584,14 +580,12 @@ static bool vga_arbiter_add_pci_device(struct pci_dev *pdev) /* Deal with VGA default device. Use first enabled one * by default if arch doesn't have it's own hook */ -#ifndef __ARCH_HAS_VGA_DEFAULT_DEVICE if (vga_default == NULL && ((vgadev->owns & VGA_RSRC_LEGACY_MASK) == VGA_RSRC_LEGACY_MASK)) { pr_info("vgaarb: setting as boot device: PCI:%s\n", pci_name(pdev)); vga_set_default_device(pdev); } -#endif vga_arbiter_check_bridge_sharing(vgadev); @@ -625,10 +619,8 @@ static bool vga_arbiter_del_pci_device(struct pci_dev *pdev) goto bail; } -#ifndef __ARCH_HAS_VGA_DEFAULT_DEVICE if (vga_default == pdev) vga_set_default_device(NULL); -#endif if (vgadev->decodes & (VGA_RSRC_LEGACY_IO | VGA_RSRC_LEGACY_MEM)) vga_decode_count--; diff --git a/include/linux/vgaarb.h b/include/linux/vgaarb.h index 2c02f3a8d2ba..c37bd4d06739 100644 --- a/include/linux/vgaarb.h +++ b/include/linux/vgaarb.h @@ -182,7 +182,6 @@ extern void vga_put(struct pci_dev *pdev, unsigned int rsrc); * vga_get()... */ -#ifndef __ARCH_HAS_VGA_DEFAULT_DEVICE #ifdef CONFIG_VGA_ARB extern struct pci_dev *vga_default_device(void); extern void vga_set_default_device(struct pci_dev *pdev); @@ -190,7 +189,6 @@ extern void vga_set_default_device(struct pci_dev *pdev); static inline struct pci_dev *vga_default_device(void) { return NULL; }; static inline void vga_set_default_device(struct pci_dev *pdev) { }; #endif -#endif /** * vga_conflicts -- cgit v1.2.3 From 125c4cf9f37c98fed2c08229b31358cfec63dcf6 Mon Sep 17 00:00:00 2001 From: Filipe Manana Date: Thu, 11 Sep 2014 21:22:14 +0100 Subject: Btrfs: set inode's logged_trans/last_log_commit after ranged fsync When a ranged fsync finishes if there are still extent maps in the modified list, still set the inode's logged_trans and last_log_commit. This is important in case an inode is fsync'ed and unlinked in the same transaction, to ensure its inode ref gets deleted from the log and the respective dentries in its parent are deleted too from the log (if the parent directory was fsync'ed in the same transaction). Instead make btrfs_inode_in_log() return false if the list of modified extent maps isn't empty. This is an incremental on top of the v4 version of the patch: "Btrfs: fix fsync data loss after a ranged fsync" which was added to its v5, but didn't make it on time. Signed-off-by: Filipe Manana Signed-off-by: Chris Mason --- fs/btrfs/btrfs_inode.h | 13 +++++++++++-- fs/btrfs/tree-log.c | 14 ++------------ 2 files changed, 13 insertions(+), 14 deletions(-) diff --git a/fs/btrfs/btrfs_inode.h b/fs/btrfs/btrfs_inode.h index 43527fd78825..56b8522d5767 100644 --- a/fs/btrfs/btrfs_inode.h +++ b/fs/btrfs/btrfs_inode.h @@ -234,8 +234,17 @@ static inline int btrfs_inode_in_log(struct inode *inode, u64 generation) BTRFS_I(inode)->last_sub_trans <= BTRFS_I(inode)->last_log_commit && BTRFS_I(inode)->last_sub_trans <= - BTRFS_I(inode)->root->last_log_commit) - return 1; + BTRFS_I(inode)->root->last_log_commit) { + /* + * After a ranged fsync we might have left some extent maps + * (that fall outside the fsync's range). So return false + * here if the list isn't empty, to make sure btrfs_log_inode() + * will be called and process those extent maps. + */ + smp_mb(); + if (list_empty(&BTRFS_I(inode)->extent_tree.modified_extents)) + return 1; + } return 0; } diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c index d296efe2d3e7..1d1ba083ca6e 100644 --- a/fs/btrfs/tree-log.c +++ b/fs/btrfs/tree-log.c @@ -4093,18 +4093,8 @@ log_extents: } } - write_lock(&em_tree->lock); - /* - * If we're doing a ranged fsync and there are still modified extents - * in the list, we must run on the next fsync call as it might cover - * those extents (a full fsync or an fsync for other range). - */ - if (list_empty(&em_tree->modified_extents)) { - BTRFS_I(inode)->logged_trans = trans->transid; - BTRFS_I(inode)->last_log_commit = - BTRFS_I(inode)->last_sub_trans; - } - write_unlock(&em_tree->lock); + BTRFS_I(inode)->logged_trans = trans->transid; + BTRFS_I(inode)->last_log_commit = BTRFS_I(inode)->last_sub_trans; out_unlock: if (unlikely(err)) btrfs_put_logged_extents(&logged_list); -- cgit v1.2.3 From 7dc9250f1d08f470f8d4e585a2eaeb951d4356be Mon Sep 17 00:00:00 2001 From: Benjamin Gaignard Date: Wed, 3 Sep 2014 19:04:20 +0200 Subject: drm: sti: do not iterate over the info frame array avi infoframe is a 13 bytes array, do not read after this limite. Signed-off-by: Benjamin Gaignard Signed-off-by: Dave Airlie --- drivers/gpu/drm/sti/sti_hdmi.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/gpu/drm/sti/sti_hdmi.c b/drivers/gpu/drm/sti/sti_hdmi.c index ef93156a69c6..b22968c08d1f 100644 --- a/drivers/gpu/drm/sti/sti_hdmi.c +++ b/drivers/gpu/drm/sti/sti_hdmi.c @@ -298,7 +298,6 @@ static int hdmi_avi_infoframe_config(struct sti_hdmi *hdmi) hdmi_write(hdmi, val, HDMI_SW_DI_N_PKT_WORD2(HDMI_IFRAME_SLOT_AVI)); val = frame[0xC]; - val |= frame[0xD] << 8; hdmi_write(hdmi, val, HDMI_SW_DI_N_PKT_WORD3(HDMI_IFRAME_SLOT_AVI)); /* Enable transmission slot for AVI infoframe -- cgit v1.2.3 From dab1b4450df481f9d18b66fefcea6aef5e4708fb Mon Sep 17 00:00:00 2001 From: Markos Chandras Date: Wed, 16 Jul 2014 14:46:31 +0100 Subject: MIPS: SmartMIPS: Disable assembler warnings The kernel code overrides the default ISA as passed by the compiler in quite a few places. This has unfortunate side effects when smartmips is enabled leading to hundreds of warnings during build such as: {standard input}: Assembler messages: {standard input}:411: Warning: the `smartmips' extension requires MIPS32 revision 1 or greater {standard input}: Assembler messages: {standard input}:43: Warning: the 64-bit MIPS architecture does not support the `smartmips' extension [...] Until the kernel code is fixed properly (if possible), disable all the assembler warning messages to make the build logs readable again. This has no runtime side effects but it makes it easier to spot more critical warnings and problems during build. Signed-off-by: Markos Chandras Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7356/ Signed-off-by: Ralf Baechle --- arch/mips/Makefile | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 9336509f47ad..bbac51e11179 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -113,7 +113,16 @@ predef-le += -DMIPSEL -D_MIPSEL -D__MIPSEL -D__MIPSEL__ cflags-$(CONFIG_CPU_BIG_ENDIAN) += $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' && echo -EB $(undef-all) $(predef-be)) cflags-$(CONFIG_CPU_LITTLE_ENDIAN) += $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' || echo -EL $(undef-all) $(predef-le)) -cflags-$(CONFIG_CPU_HAS_SMARTMIPS) += $(call cc-option,-msmartmips) +# For smartmips configurations, there are hundreds of warnings due to ISA overrides +# in assembly and header files. smartmips is only supported for MIPS32r1 onwards +# and there is no support for 64-bit. Various '.set mips2' or '.set mips3' or +# similar directives in the kernel will spam the build logs with the following warnings: +# Warning: the `smartmips' extension requires MIPS32 revision 1 or greater +# or +# Warning: the 64-bit MIPS architecture does not support the `smartmips' extension +# Pass -Wa,--no-warn to disable all assembler warnings until the kernel code has +# been fixed properly. +cflags-$(CONFIG_CPU_HAS_SMARTMIPS) += $(call cc-option,-msmartmips) -Wa,--no-warn cflags-$(CONFIG_CPU_MICROMIPS) += $(call cc-option,-mmicromips) cflags-$(CONFIG_SB1XXX_CORELIS) += $(call cc-option,-mno-sched-prolog) \ -- cgit v1.2.3 From 8ba4caf1ee1585f018d32ab924244c9589bc9f37 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Wed, 17 Sep 2014 10:57:45 -0400 Subject: Revert "init: make rootdelay=N consistent with rootwait behaviour" This reverts commit 4dfe694f616e00e6fd83e5bbcd7a3c4d7113493d. In that, we did: Here we move the rootdelay code to be right beside the rootwait code, so that their behaviour is consistent. ...which is fine, but in hindsight, perhaps moving the rootwait to be beside the rootdelay would have been better. We also indicated: It should be noted that in doing so, the actions based on the saved_root_name[0] and initrd_load() were previously put on hold by rootdelay=N and now currently will not be delayed. However, I think consistent behaviour is more important than matching historical behaviour of delaying the above two operations. But Pavel reported an instance where an ARM target with root on MMC was failing to mount root, and Russell diagnosed it to the fact that the call to set ROOT_DEV within the saved_root_name[0] processing block mentioned above was no longer being delayed. Rather than moving both wait clauses to the original position of rootdelay and risking unearthing other possible corner case breakage at this point in time, we simply revert now and we can revisit trying the alternate/earlier location in another development cycle. Cc: Pavel Machek Cc: Russell King Cc: Andrew Morton Signed-off-by: Paul Gortmaker Signed-off-by: Linus Torvalds --- init/do_mounts.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/init/do_mounts.c b/init/do_mounts.c index b6237c31b0e2..82f22885c87e 100644 --- a/init/do_mounts.c +++ b/init/do_mounts.c @@ -539,6 +539,12 @@ void __init prepare_namespace(void) { int is_floppy; + if (root_delay) { + printk(KERN_INFO "Waiting %d sec before mounting root device...\n", + root_delay); + ssleep(root_delay); + } + /* * wait for the known devices to complete their probing * @@ -565,12 +571,6 @@ void __init prepare_namespace(void) if (initrd_load()) goto out; - if (root_delay) { - pr_info("Waiting %d sec before mounting root device...\n", - root_delay); - ssleep(root_delay); - } - /* wait for any asynchronous scanning to complete */ if ((ROOT_DEV == 0) && root_wait) { printk(KERN_INFO "Waiting for root device %s...\n", -- cgit v1.2.3 From 096b49951712291824e9f9358a0c46417011098e Mon Sep 17 00:00:00 2001 From: Sebastian Herbszt Date: Sat, 30 Aug 2014 00:31:11 +0200 Subject: target: Fix user data segment multiplier in spc_emulate_evpd_b3() This patch fixes an apparent cut and paste error in spc_emulate_evpd_b3(), where lba_map_segment_size was being used twice for the Referrals VPD. Go ahead and set the correct user data segment multiplier instead of user data segment size. Signed-off-by: Sebastian Herbszt Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_spc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/target/target_core_spc.c b/drivers/target/target_core_spc.c index 6cd7222738fc..bc286a67af7c 100644 --- a/drivers/target/target_core_spc.c +++ b/drivers/target/target_core_spc.c @@ -664,7 +664,7 @@ spc_emulate_evpd_b3(struct se_cmd *cmd, unsigned char *buf) buf[0] = dev->transport->get_device_type(dev); buf[3] = 0x0c; put_unaligned_be32(dev->t10_alua.lba_map_segment_size, &buf[8]); - put_unaligned_be32(dev->t10_alua.lba_map_segment_size, &buf[12]); + put_unaligned_be32(dev->t10_alua.lba_map_segment_multiplier, &buf[12]); return 0; } -- cgit v1.2.3 From 1f0b030c45c781f9fe568e5e2a813d6c8567a051 Mon Sep 17 00:00:00 2001 From: Sebastian Herbszt Date: Mon, 1 Sep 2014 00:17:53 +0200 Subject: target: Fix inverted logic in SE_DEV_ALUA_SUPPORT_STATE_STORE Fix inverted logic in SE_DEV_ALUA_SUPPORT_STATE_STORE for setting the supported ALUA access states via configfs, originally introduced in commit b0a382c5. A value of 1 should enable the support, not disable it. Signed-off-by: Sebastian Herbszt Cc: # v3.14+ Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_configfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/target/target_core_configfs.c b/drivers/target/target_core_configfs.c index bf55c5a04cfa..756def38c77a 100644 --- a/drivers/target/target_core_configfs.c +++ b/drivers/target/target_core_configfs.c @@ -2363,7 +2363,7 @@ static ssize_t target_core_alua_tg_pt_gp_store_attr_alua_support_##_name(\ pr_err("Invalid value '%ld', must be '0' or '1'\n", tmp); \ return -EINVAL; \ } \ - if (!tmp) \ + if (tmp) \ t->_var |= _bit; \ else \ t->_var &= ~_bit; \ -- cgit v1.2.3 From b53b0d99d6fbf7d44330395349a895521cfdbc96 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Wed, 17 Sep 2014 11:45:17 -0700 Subject: iscsi-target: Fix memory corruption in iscsit_logout_post_handler_diffcid This patch fixes a bug in iscsit_logout_post_handler_diffcid() where a pointer used as storage for list_for_each_entry() was incorrectly being used to determine if no matching entry had been found. This patch changes iscsit_logout_post_handler_diffcid() to key off bool conn_found to determine if the function needs to exit early. Reported-by: Joern Engel Cc: # v3.1+ Signed-off-by: Nicholas Bellinger --- drivers/target/iscsi/iscsi_target.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c index 1f4c794f5fcc..260c3e1e312c 100644 --- a/drivers/target/iscsi/iscsi_target.c +++ b/drivers/target/iscsi/iscsi_target.c @@ -4540,6 +4540,7 @@ static void iscsit_logout_post_handler_diffcid( { struct iscsi_conn *l_conn; struct iscsi_session *sess = conn->sess; + bool conn_found = false; if (!sess) return; @@ -4548,12 +4549,13 @@ static void iscsit_logout_post_handler_diffcid( list_for_each_entry(l_conn, &sess->sess_conn_list, conn_list) { if (l_conn->cid == cid) { iscsit_inc_conn_usage_count(l_conn); + conn_found = true; break; } } spin_unlock_bh(&sess->conn_lock); - if (!l_conn) + if (!conn_found) return; if (l_conn->sock) -- cgit v1.2.3 From 8ae757d09c45102b347a1bc2867f54ffc1ab8fda Mon Sep 17 00:00:00 2001 From: Joern Engel Date: Tue, 2 Sep 2014 17:49:54 -0400 Subject: iscsi-target: avoid NULL pointer in iscsi_copy_param_list failure In iscsi_copy_param_list() a failed iscsi_param_list memory allocation currently invokes iscsi_release_param_list() to cleanup, and will promptly trigger a NULL pointer dereference. Instead, go ahead and return for the first iscsi_copy_param_list() failure case. Found by coverity. Signed-off-by: Joern Engel Cc: # v3.1+ Signed-off-by: Nicholas Bellinger --- drivers/target/iscsi/iscsi_target_parameters.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/target/iscsi/iscsi_target_parameters.c b/drivers/target/iscsi/iscsi_target_parameters.c index 02f9de26f38a..18c29260b4a2 100644 --- a/drivers/target/iscsi/iscsi_target_parameters.c +++ b/drivers/target/iscsi/iscsi_target_parameters.c @@ -601,7 +601,7 @@ int iscsi_copy_param_list( param_list = kzalloc(sizeof(struct iscsi_param_list), GFP_KERNEL); if (!param_list) { pr_err("Unable to allocate memory for struct iscsi_param_list.\n"); - goto err_out; + return -1; } INIT_LIST_HEAD(¶m_list->param_list); INIT_LIST_HEAD(¶m_list->extra_response_list); -- cgit v1.2.3 From 8c875fca1a8d76665c60fa141c220cee65f44f5e Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Fri, 12 Sep 2014 15:46:29 +0300 Subject: drm/i915: Add limited color range readout for HDMI/DP ports on g4x/vlv/chv MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The limited color range knob is in the port registers on g4x and vlv/chv for HDMI, and on g4x for DP. Add the relevant code to read out the hardware state into pipe config. On vlv/chv the DP port limited color range knob is in PIPECONF for which we already have readout code. Cc: Chris Clayton Signed-off-by: Ville Syrjälä Tested-by: Chris Clayton Reviewed-by: Daniel Vetter Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_dp.c | 4 ++++ drivers/gpu/drm/i915/intel_hdmi.c | 7 ++++++- 2 files changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 81d7681faa63..fdff1d420c14 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -1631,6 +1631,10 @@ static void intel_dp_get_config(struct intel_encoder *encoder, pipe_config->adjusted_mode.flags |= flags; + if (!HAS_PCH_SPLIT(dev) && !IS_VALLEYVIEW(dev) && + tmp & DP_COLOR_RANGE_16_235) + pipe_config->limited_color_range = true; + pipe_config->has_dp_encoder = true; intel_dp_get_m_n(crtc, pipe_config); diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c index f9151f6641d9..ca34de7f6a7b 100644 --- a/drivers/gpu/drm/i915/intel_hdmi.c +++ b/drivers/gpu/drm/i915/intel_hdmi.c @@ -712,7 +712,8 @@ static void intel_hdmi_get_config(struct intel_encoder *encoder, struct intel_crtc_config *pipe_config) { struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base); - struct drm_i915_private *dev_priv = encoder->base.dev->dev_private; + struct drm_device *dev = encoder->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; u32 tmp, flags = 0; int dotclock; @@ -734,6 +735,10 @@ static void intel_hdmi_get_config(struct intel_encoder *encoder, if (tmp & HDMI_MODE_SELECT_HDMI) pipe_config->has_audio = true; + if (!HAS_PCH_SPLIT(dev) && + tmp & HDMI_COLOR_RANGE_16_235) + pipe_config->limited_color_range = true; + pipe_config->adjusted_mode.flags |= flags; if ((tmp & SDVO_COLOR_FORMAT_MASK) == HDMI_COLOR_FORMAT_12bpc) -- cgit v1.2.3 From 0f23ae74f589304bf33233f85737f4fd368549eb Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Thu, 18 Sep 2014 07:49:05 -0700 Subject: Revert "Btrfs: device_list_add() should not update list when mounted" This reverts commit b96de000bc8bc9688b3a2abea4332bd57648a49f. This commit is triggering failures to mount by subvolume id in some configurations. The main problem is how many different ways this scanning function is used, both for scanning while mounted and unmounted. A proper cleanup is too big for late rcs. For now, just revert the commit and we'll put a better fix into a later merge window. Signed-off-by: Chris Mason --- fs/btrfs/volumes.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index 340a92d08e84..2c2d6d1d8eee 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -529,12 +529,12 @@ static noinline int device_list_add(const char *path, */ /* - * As of now don't allow update to btrfs_fs_device through - * the btrfs dev scan cli, after FS has been mounted. + * For now, we do allow update to btrfs_fs_device through the + * btrfs dev scan cli after FS has been mounted. We're still + * tracking a problem where systems fail mount by subvolume id + * when we reject replacement on a mounted FS. */ - if (fs_devices->opened) { - return -EBUSY; - } else { + if (!fs_devices->opened && found_transid < device->generation) { /* * That is if the FS is _not_ mounted and if you * are here, that means there is more than one @@ -542,8 +542,7 @@ static noinline int device_list_add(const char *path, * with larger generation number or the last-in if * generation are equal. */ - if (found_transid < device->generation) - return -EEXIST; + return -EEXIST; } name = rcu_string_strdup(path, GFP_NOFS); -- cgit v1.2.3 From 080af20cc945d110f9912d01cf6b66f94a375b8d Mon Sep 17 00:00:00 2001 From: Steve Dickson Date: Thu, 18 Sep 2014 09:13:17 -0400 Subject: NFSv4: nfs4_state_manager() vs. nfs_server_remove_lists() There is a race between nfs4_state_manager() and nfs_server_remove_lists() that happens during a nfsv3 mount. The v3 mount notices there is already a supper block so nfs_server_remove_lists() called which uses the nfs_client_lock spin lock to synchronize access to the client list. At the same time nfs4_state_manager() is running through the client list looking for work to do, using the same lock. When nfs4_state_manager() wins the race to the list, a v3 client pointer is found and not ignored properly which causes the panic. Moving some protocol checks before the state checking avoids the panic. CC: Stable Tree Signed-off-by: Steve Dickson Signed-off-by: Trond Myklebust --- fs/nfs/nfs4client.c | 38 ++++++++++++++++++++------------------ 1 file changed, 20 insertions(+), 18 deletions(-) diff --git a/fs/nfs/nfs4client.c b/fs/nfs/nfs4client.c index 53e435a95260..ffdb28d86cf8 100644 --- a/fs/nfs/nfs4client.c +++ b/fs/nfs/nfs4client.c @@ -482,6 +482,16 @@ int nfs40_walk_client_list(struct nfs_client *new, spin_lock(&nn->nfs_client_lock); list_for_each_entry(pos, &nn->nfs_client_list, cl_share_link) { + + if (pos->rpc_ops != new->rpc_ops) + continue; + + if (pos->cl_proto != new->cl_proto) + continue; + + if (pos->cl_minorversion != new->cl_minorversion) + continue; + /* If "pos" isn't marked ready, we can't trust the * remaining fields in "pos" */ if (pos->cl_cons_state > NFS_CS_READY) { @@ -501,15 +511,6 @@ int nfs40_walk_client_list(struct nfs_client *new, if (pos->cl_cons_state != NFS_CS_READY) continue; - if (pos->rpc_ops != new->rpc_ops) - continue; - - if (pos->cl_proto != new->cl_proto) - continue; - - if (pos->cl_minorversion != new->cl_minorversion) - continue; - if (pos->cl_clientid != new->cl_clientid) continue; @@ -622,6 +623,16 @@ int nfs41_walk_client_list(struct nfs_client *new, spin_lock(&nn->nfs_client_lock); list_for_each_entry(pos, &nn->nfs_client_list, cl_share_link) { + + if (pos->rpc_ops != new->rpc_ops) + continue; + + if (pos->cl_proto != new->cl_proto) + continue; + + if (pos->cl_minorversion != new->cl_minorversion) + continue; + /* If "pos" isn't marked ready, we can't trust the * remaining fields in "pos", especially the client * ID and serverowner fields. Wait for CREATE_SESSION @@ -647,15 +658,6 @@ int nfs41_walk_client_list(struct nfs_client *new, if (pos->cl_cons_state != NFS_CS_READY) continue; - if (pos->rpc_ops != new->rpc_ops) - continue; - - if (pos->cl_proto != new->cl_proto) - continue; - - if (pos->cl_minorversion != new->cl_minorversion) - continue; - if (!nfs4_match_clientids(pos, new)) continue; -- cgit v1.2.3 From cd9288ffaea4359d5cfe2b8d264911506aed26a4 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Thu, 18 Sep 2014 11:51:32 -0400 Subject: NFSv4: Fix another bug in the close/open_downgrade code James Drew reports another bug whereby the NFS client is now sending an OPEN_DOWNGRADE in a situation where it should really have sent a CLOSE: the client is opening the file for O_RDWR, but then trying to do a downgrade to O_RDONLY, which is not allowed by the NFSv4 spec. Reported-by: James Drews Link: http://lkml.kernel.org/r/541AD7E5.8020409@engr.wisc.edu Fixes: aee7af356e15 (NFSv4: Fix problems with close in the presence...) Cc: stable@vger.kernel.org # 2.6.33+ Signed-off-by: Trond Myklebust --- fs/nfs/nfs4proc.c | 30 +++++++++++++++--------------- 1 file changed, 15 insertions(+), 15 deletions(-) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index ac2dd953fc18..6ca0c8e7a945 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -2618,23 +2618,23 @@ static void nfs4_close_prepare(struct rpc_task *task, void *data) is_rdwr = test_bit(NFS_O_RDWR_STATE, &state->flags); is_rdonly = test_bit(NFS_O_RDONLY_STATE, &state->flags); is_wronly = test_bit(NFS_O_WRONLY_STATE, &state->flags); - /* Calculate the current open share mode */ - calldata->arg.fmode = 0; - if (is_rdonly || is_rdwr) - calldata->arg.fmode |= FMODE_READ; - if (is_wronly || is_rdwr) - calldata->arg.fmode |= FMODE_WRITE; /* Calculate the change in open mode */ + calldata->arg.fmode = 0; if (state->n_rdwr == 0) { - if (state->n_rdonly == 0) { - call_close |= is_rdonly || is_rdwr; - calldata->arg.fmode &= ~FMODE_READ; - } - if (state->n_wronly == 0) { - call_close |= is_wronly || is_rdwr; - calldata->arg.fmode &= ~FMODE_WRITE; - } - } + if (state->n_rdonly == 0) + call_close |= is_rdonly; + else if (is_rdonly) + calldata->arg.fmode |= FMODE_READ; + if (state->n_wronly == 0) + call_close |= is_wronly; + else if (is_wronly) + calldata->arg.fmode |= FMODE_WRITE; + } else if (is_rdwr) + calldata->arg.fmode |= FMODE_READ|FMODE_WRITE; + + if (calldata->arg.fmode == 0) + call_close |= is_rdwr; + if (!nfs4_valid_open_stateid(state)) call_close = 0; spin_unlock(&state->owner->so_lock); -- cgit v1.2.3 From 153a9f131f50420b7ce008c94f1c6374cbc460d7 Mon Sep 17 00:00:00 2001 From: Krzysztof Hałasa Date: Thu, 18 Sep 2014 15:12:02 +0200 Subject: Fix unbalanced mutex in dma_pool_create(). MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit dma_pool_create() needs to unlock the mutex in error case. The bug was introduced in the 3.16 by commit cc6b664aa26d ("mm/dmapool.c: remove redundant NULL check for dev in dma_pool_create()")/ Signed-off-by: Krzysztof Hałasa Cc: stable@vger.kernel.org # v3.16 Signed-off-by: Linus Torvalds --- mm/dmapool.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/dmapool.c b/mm/dmapool.c index 306baa594f95..ba8019b063e1 100644 --- a/mm/dmapool.c +++ b/mm/dmapool.c @@ -176,7 +176,7 @@ struct dma_pool *dma_pool_create(const char *name, struct device *dev, if (list_empty(&dev->dma_pools) && device_create_file(dev, &dev_attr_pools)) { kfree(retval); - return NULL; + retval = NULL; } else list_add(&retval->pools, &dev->dma_pools); mutex_unlock(&pools_lock); -- cgit v1.2.3 From 64d8ee59577a2b1de73cc40c2ec661bddf71e8b0 Mon Sep 17 00:00:00 2001 From: Kyle McMartin Date: Tue, 16 Sep 2014 15:03:30 -0400 Subject: drm/radeon: delete unused PTE_* defines They don't appear to be used anywhere... elsewhere uses R*_PTE_*. master@linux:U:.% git grep PTE_ -- drivers/gpu/drm/radeon | grep -v _PTE_ master@linux:U:.% (kyle@redacted:~/linux) ./arch/arm64/include/asm/pgtable.h:27:0: note: this is the location of the previous definition #define PTE_VALID (_AT(pteval_t, 1) << 0) ^ In file included from drivers/gpu/drm/radeon/r600_cs.c:31:0: drivers/gpu/drm/radeon/r600d.h:48:0: warning: "PTE_VALID" redefined [enabled by default] #define PTE_VALID (1 << 0) ^ In file included from ./arch/arm64/include/asm/io.h:29:0, from include/linux/clocksource.h:19, from include/clocksource/arm_arch_timer.h:19, from ./arch/arm64/include/asm/arch_timer.h:27, from ./arch/arm64/include/asm/timex.h:19, from include/linux/timex.h:65, from include/drm/drmP.h:51, from drivers/gpu/drm/radeon/r600_cs.c:29: ./arch/arm64/include/asm/pgtable.h:27:0: note: this is the location of the previous definition #define PTE_VALID (_AT(pteval_t, 1) << 0) ^ Signed-off-by: Kyle McMartin Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/r600d.h | 7 ------- 1 file changed, 7 deletions(-) diff --git a/drivers/gpu/drm/radeon/r600d.h b/drivers/gpu/drm/radeon/r600d.h index 0c4a7d8d93e0..31e1052ad3e3 100644 --- a/drivers/gpu/drm/radeon/r600d.h +++ b/drivers/gpu/drm/radeon/r600d.h @@ -44,13 +44,6 @@ #define R6XX_MAX_PIPES 8 #define R6XX_MAX_PIPES_MASK 0xff -/* PTE flags */ -#define PTE_VALID (1 << 0) -#define PTE_SYSTEM (1 << 1) -#define PTE_SNOOPED (1 << 2) -#define PTE_READABLE (1 << 5) -#define PTE_WRITEABLE (1 << 6) - /* tiling bits */ #define ARRAY_LINEAR_GENERAL 0x00000000 #define ARRAY_LINEAR_ALIGNED 0x00000001 -- cgit v1.2.3 From 897eba827e8659a03a1b2f4e74389691f824783f Mon Sep 17 00:00:00 2001 From: Michel Dänzer Date: Wed, 17 Sep 2014 16:25:55 +0900 Subject: drm/radeon: Disable HDP flush before every CS again for < r600 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit It was causing display corruption with R300 generation GPUs at least. Reported-and-Tested-by: Mikael Pettersson Signed-off-by: Michel Dänzer Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/r100.c | 28 ++++++++++++++-------------- drivers/gpu/drm/radeon/radeon_asic.c | 2 -- drivers/gpu/drm/radeon/radeon_asic.h | 3 +-- drivers/gpu/drm/radeon/radeon_drv.c | 2 +- 4 files changed, 16 insertions(+), 19 deletions(-) diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index 4c5ec44ff328..b0098e792e62 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -821,6 +821,20 @@ u32 r100_get_vblank_counter(struct radeon_device *rdev, int crtc) return RREG32(RADEON_CRTC2_CRNT_FRAME); } +/** + * r100_ring_hdp_flush - flush Host Data Path via the ring buffer + * rdev: radeon device structure + * ring: ring buffer struct for emitting packets + */ +static void r100_ring_hdp_flush(struct radeon_device *rdev, struct radeon_ring *ring) +{ + radeon_ring_write(ring, PACKET0(RADEON_HOST_PATH_CNTL, 0)); + radeon_ring_write(ring, rdev->config.r100.hdp_cntl | + RADEON_HDP_READ_BUFFER_INVALIDATE); + radeon_ring_write(ring, PACKET0(RADEON_HOST_PATH_CNTL, 0)); + radeon_ring_write(ring, rdev->config.r100.hdp_cntl); +} + /* Who ever call radeon_fence_emit should call ring_lock and ask * for enough space (today caller are ib schedule and buffer move) */ void r100_fence_ring_emit(struct radeon_device *rdev, @@ -1056,20 +1070,6 @@ void r100_gfx_set_wptr(struct radeon_device *rdev, (void)RREG32(RADEON_CP_RB_WPTR); } -/** - * r100_ring_hdp_flush - flush Host Data Path via the ring buffer - * rdev: radeon device structure - * ring: ring buffer struct for emitting packets - */ -void r100_ring_hdp_flush(struct radeon_device *rdev, struct radeon_ring *ring) -{ - radeon_ring_write(ring, PACKET0(RADEON_HOST_PATH_CNTL, 0)); - radeon_ring_write(ring, rdev->config.r100.hdp_cntl | - RADEON_HDP_READ_BUFFER_INVALIDATE); - radeon_ring_write(ring, PACKET0(RADEON_HOST_PATH_CNTL, 0)); - radeon_ring_write(ring, rdev->config.r100.hdp_cntl); -} - static void r100_cp_load_microcode(struct radeon_device *rdev) { const __be32 *fw_data; diff --git a/drivers/gpu/drm/radeon/radeon_asic.c b/drivers/gpu/drm/radeon/radeon_asic.c index eeeeabe09758..2dd5847f9b98 100644 --- a/drivers/gpu/drm/radeon/radeon_asic.c +++ b/drivers/gpu/drm/radeon/radeon_asic.c @@ -185,7 +185,6 @@ static struct radeon_asic_ring r100_gfx_ring = { .get_rptr = &r100_gfx_get_rptr, .get_wptr = &r100_gfx_get_wptr, .set_wptr = &r100_gfx_set_wptr, - .hdp_flush = &r100_ring_hdp_flush, }; static struct radeon_asic r100_asic = { @@ -332,7 +331,6 @@ static struct radeon_asic_ring r300_gfx_ring = { .get_rptr = &r100_gfx_get_rptr, .get_wptr = &r100_gfx_get_wptr, .set_wptr = &r100_gfx_set_wptr, - .hdp_flush = &r100_ring_hdp_flush, }; static struct radeon_asic r300_asic = { diff --git a/drivers/gpu/drm/radeon/radeon_asic.h b/drivers/gpu/drm/radeon/radeon_asic.h index 275a5dc01780..7756bc1e1cd3 100644 --- a/drivers/gpu/drm/radeon/radeon_asic.h +++ b/drivers/gpu/drm/radeon/radeon_asic.h @@ -148,8 +148,7 @@ u32 r100_gfx_get_wptr(struct radeon_device *rdev, struct radeon_ring *ring); void r100_gfx_set_wptr(struct radeon_device *rdev, struct radeon_ring *ring); -void r100_ring_hdp_flush(struct radeon_device *rdev, - struct radeon_ring *ring); + /* * r200,rv250,rs300,rv280 */ diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c index 8df888908833..e8545be7d584 100644 --- a/drivers/gpu/drm/radeon/radeon_drv.c +++ b/drivers/gpu/drm/radeon/radeon_drv.c @@ -83,7 +83,7 @@ * CIK: 1D and linear tiling modes contain valid PIPE_CONFIG * 2.39.0 - Add INFO query for number of active CUs * 2.40.0 - Add RADEON_GEM_GTT_WC/UC, flush HDP cache before submitting - * CS to GPU + * CS to GPU on >= r600 */ #define KMS_DRIVER_MAJOR 2 #define KMS_DRIVER_MINOR 40 -- cgit v1.2.3 From 39da038479a81a35a7f8af3ab2c90effd5c8eff1 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 18 Sep 2014 11:16:31 -0400 Subject: drm/radeon/dpm: fix resume on mullins Need to properly disable nb dpm on dpm disable. Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/kv_dpm.c | 28 +++++++++++++++++++++------- 1 file changed, 21 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/radeon/kv_dpm.c b/drivers/gpu/drm/radeon/kv_dpm.c index 8b58e11b64fa..67cb472d188c 100644 --- a/drivers/gpu/drm/radeon/kv_dpm.c +++ b/drivers/gpu/drm/radeon/kv_dpm.c @@ -33,6 +33,8 @@ #define KV_MINIMUM_ENGINE_CLOCK 800 #define SMC_RAM_END 0x40000 +static int kv_enable_nb_dpm(struct radeon_device *rdev, + bool enable); static void kv_init_graphics_levels(struct radeon_device *rdev); static int kv_calculate_ds_divider(struct radeon_device *rdev); static int kv_calculate_nbps_level_settings(struct radeon_device *rdev); @@ -1295,6 +1297,9 @@ void kv_dpm_disable(struct radeon_device *rdev) { kv_smc_bapm_enable(rdev, false); + if (rdev->family == CHIP_MULLINS) + kv_enable_nb_dpm(rdev, false); + /* powerup blocks */ kv_dpm_powergate_acp(rdev, false); kv_dpm_powergate_samu(rdev, false); @@ -1769,15 +1774,24 @@ static int kv_update_dfs_bypass_settings(struct radeon_device *rdev, return ret; } -static int kv_enable_nb_dpm(struct radeon_device *rdev) +static int kv_enable_nb_dpm(struct radeon_device *rdev, + bool enable) { struct kv_power_info *pi = kv_get_pi(rdev); int ret = 0; - if (pi->enable_nb_dpm && !pi->nb_dpm_enabled) { - ret = kv_notify_message_to_smu(rdev, PPSMC_MSG_NBDPM_Enable); - if (ret == 0) - pi->nb_dpm_enabled = true; + if (enable) { + if (pi->enable_nb_dpm && !pi->nb_dpm_enabled) { + ret = kv_notify_message_to_smu(rdev, PPSMC_MSG_NBDPM_Enable); + if (ret == 0) + pi->nb_dpm_enabled = true; + } + } else { + if (pi->enable_nb_dpm && pi->nb_dpm_enabled) { + ret = kv_notify_message_to_smu(rdev, PPSMC_MSG_NBDPM_Disable); + if (ret == 0) + pi->nb_dpm_enabled = false; + } } return ret; @@ -1864,7 +1878,7 @@ int kv_dpm_set_power_state(struct radeon_device *rdev) } kv_update_sclk_t(rdev); if (rdev->family == CHIP_MULLINS) - kv_enable_nb_dpm(rdev); + kv_enable_nb_dpm(rdev, true); } } else { if (pi->enable_dpm) { @@ -1889,7 +1903,7 @@ int kv_dpm_set_power_state(struct radeon_device *rdev) } kv_update_acp_boot_level(rdev); kv_update_sclk_t(rdev); - kv_enable_nb_dpm(rdev); + kv_enable_nb_dpm(rdev, true); } } -- cgit v1.2.3 From 31a25e2caf9367365fcb0e57fd8fa5a42e9b73e4 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 17 Sep 2014 17:41:04 -0400 Subject: drm/radeon: don't reset dma on NI/SI init MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Otherwise we may lose the DMA golden settings which can lead to hangs, etc. bug: https://www.libreoffice.org/bugzilla/show_bug.cgi?id=83500 Reviewed-by: Christian König Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/ni_dma.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/drivers/gpu/drm/radeon/ni_dma.c b/drivers/gpu/drm/radeon/ni_dma.c index 8a3e6221cece..f26f0a9fb522 100644 --- a/drivers/gpu/drm/radeon/ni_dma.c +++ b/drivers/gpu/drm/radeon/ni_dma.c @@ -191,12 +191,6 @@ int cayman_dma_resume(struct radeon_device *rdev) u32 reg_offset, wb_offset; int i, r; - /* Reset dma */ - WREG32(SRBM_SOFT_RESET, SOFT_RESET_DMA | SOFT_RESET_DMA1); - RREG32(SRBM_SOFT_RESET); - udelay(50); - WREG32(SRBM_SOFT_RESET, 0); - for (i = 0; i < 2; i++) { if (i == 0) { ring = &rdev->ring[R600_RING_TYPE_DMA_INDEX]; -- cgit v1.2.3 From 799028d5d85384cce140323be633c8d5f079193f Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 18 Sep 2014 10:18:43 -0400 Subject: drm/radeon: don't reset sdma on CIK init MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Otherwise we may lose the DMA golden settings which can lead to hangs, etc. Reviewed-by: Christian König Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/cik_sdma.c | 7 ------- 1 file changed, 7 deletions(-) diff --git a/drivers/gpu/drm/radeon/cik_sdma.c b/drivers/gpu/drm/radeon/cik_sdma.c index 192278bc993c..c4ffa54b1e3d 100644 --- a/drivers/gpu/drm/radeon/cik_sdma.c +++ b/drivers/gpu/drm/radeon/cik_sdma.c @@ -489,13 +489,6 @@ int cik_sdma_resume(struct radeon_device *rdev) { int r; - /* Reset dma */ - WREG32(SRBM_SOFT_RESET, SOFT_RESET_SDMA | SOFT_RESET_SDMA1); - RREG32(SRBM_SOFT_RESET); - udelay(50); - WREG32(SRBM_SOFT_RESET, 0); - RREG32(SRBM_SOFT_RESET); - r = cik_sdma_load_microcode(rdev); if (r) return r; -- cgit v1.2.3 From c1789a2e66a4209fe5035eca11fdd729b2ffdd82 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 18 Sep 2014 10:23:04 -0400 Subject: drm/radeon: don't reset dma on r6xx-evergreen init MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Otherwise we may lose the DMA golden settings which can lead to hangs, etc. Reviewed-by: Christian König Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/r600_dma.c | 9 --------- 1 file changed, 9 deletions(-) diff --git a/drivers/gpu/drm/radeon/r600_dma.c b/drivers/gpu/drm/radeon/r600_dma.c index 51fd98553eaf..a908daa006d2 100644 --- a/drivers/gpu/drm/radeon/r600_dma.c +++ b/drivers/gpu/drm/radeon/r600_dma.c @@ -124,15 +124,6 @@ int r600_dma_resume(struct radeon_device *rdev) u32 rb_bufsz; int r; - /* Reset dma */ - if (rdev->family >= CHIP_RV770) - WREG32(SRBM_SOFT_RESET, RV770_SOFT_RESET_DMA); - else - WREG32(SRBM_SOFT_RESET, SOFT_RESET_DMA); - RREG32(SRBM_SOFT_RESET); - udelay(50); - WREG32(SRBM_SOFT_RESET, 0); - WREG32(DMA_SEM_INCOMPLETE_TIMER_CNTL, 0); WREG32(DMA_SEM_WAIT_FAIL_TIMER_CNTL, 0); -- cgit v1.2.3 From 766a53d059d1500c9755c8af017bd411bd8f1b20 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 12 Sep 2014 17:51:29 -0400 Subject: vgaswitcheroo: add vga_switcheroo_fini_domain_pm_ops MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Drivers should call this on unload to unregister pmops. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=84431 Reviewed-by: Ben Skeggs Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Pali Rohár Cc: Ben Skeggs --- drivers/gpu/vga/vga_switcheroo.c | 6 ++++++ include/linux/vga_switcheroo.h | 2 ++ 2 files changed, 8 insertions(+) diff --git a/drivers/gpu/vga/vga_switcheroo.c b/drivers/gpu/vga/vga_switcheroo.c index 6866448083b2..37ac7b5dbd06 100644 --- a/drivers/gpu/vga/vga_switcheroo.c +++ b/drivers/gpu/vga/vga_switcheroo.c @@ -660,6 +660,12 @@ int vga_switcheroo_init_domain_pm_ops(struct device *dev, struct dev_pm_domain * } EXPORT_SYMBOL(vga_switcheroo_init_domain_pm_ops); +void vga_switcheroo_fini_domain_pm_ops(struct device *dev) +{ + dev->pm_domain = NULL; +} +EXPORT_SYMBOL(vga_switcheroo_fini_domain_pm_ops); + static int vga_switcheroo_runtime_resume_hdmi_audio(struct device *dev) { struct pci_dev *pdev = to_pci_dev(dev); diff --git a/include/linux/vga_switcheroo.h b/include/linux/vga_switcheroo.h index 502073a53dd3..b483abd34493 100644 --- a/include/linux/vga_switcheroo.h +++ b/include/linux/vga_switcheroo.h @@ -64,6 +64,7 @@ int vga_switcheroo_get_client_state(struct pci_dev *dev); void vga_switcheroo_set_dynamic_switch(struct pci_dev *pdev, enum vga_switcheroo_state dynamic); int vga_switcheroo_init_domain_pm_ops(struct device *dev, struct dev_pm_domain *domain); +void vga_switcheroo_fini_domain_pm_ops(struct device *dev); int vga_switcheroo_init_domain_pm_optimus_hdmi_audio(struct device *dev, struct dev_pm_domain *domain); #else @@ -82,6 +83,7 @@ static inline int vga_switcheroo_get_client_state(struct pci_dev *dev) { return static inline void vga_switcheroo_set_dynamic_switch(struct pci_dev *pdev, enum vga_switcheroo_state dynamic) {} static inline int vga_switcheroo_init_domain_pm_ops(struct device *dev, struct dev_pm_domain *domain) { return -EINVAL; } +static inline void vga_switcheroo_fini_domain_pm_ops(struct device *dev) {} static inline int vga_switcheroo_init_domain_pm_optimus_hdmi_audio(struct device *dev, struct dev_pm_domain *domain) { return -EINVAL; } #endif -- cgit v1.2.3 From 2e97140dd58cab8772bf77d73eabda213e45202d Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 12 Sep 2014 18:00:53 -0400 Subject: drm/radeon/px: fix module unload MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Use the new vga_switcheroo_fini_domain_pm_ops function to unregister the pm ops. Based on a patch from: Pali Rohár bug: https://bugzilla.kernel.org/show_bug.cgi?id=84431 Reviewed-by: Ben Skeggs Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Pali Rohár Cc: Ben Skeggs --- drivers/gpu/drm/radeon/radeon_device.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index 6a219bcee66d..75223dd3a8a3 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -1393,7 +1393,7 @@ int radeon_device_init(struct radeon_device *rdev, r = radeon_init(rdev); if (r) - return r; + goto failed; r = radeon_ib_ring_tests(rdev); if (r) @@ -1413,7 +1413,7 @@ int radeon_device_init(struct radeon_device *rdev, radeon_agp_disable(rdev); r = radeon_init(rdev); if (r) - return r; + goto failed; } if ((radeon_testing & 1)) { @@ -1435,6 +1435,11 @@ int radeon_device_init(struct radeon_device *rdev, DRM_INFO("radeon: acceleration disabled, skipping benchmarks\n"); } return 0; + +failed: + if (runtime) + vga_switcheroo_fini_domain_pm_ops(rdev->dev); + return r; } static void radeon_debugfs_remove_files(struct radeon_device *rdev); @@ -1455,6 +1460,8 @@ void radeon_device_fini(struct radeon_device *rdev) radeon_bo_evict_vram(rdev); radeon_fini(rdev); vga_switcheroo_unregister_client(rdev->pdev); + if (rdev->flags & RADEON_IS_PX) + vga_switcheroo_fini_domain_pm_ops(rdev->dev); vga_client_register(rdev->pdev, NULL, NULL, NULL); if (rdev->rio_mem) pci_iounmap(rdev->pdev, rdev->rio_mem); -- cgit v1.2.3 From 53beaa01e0fe8e4202f43485a03b32fcf5dfea74 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 12 Sep 2014 18:06:56 -0400 Subject: drm/nouveau/runpm: fix module unload MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Use the new vga_switcheroo_fini_domain_pm_ops function to unregister the pm ops. Based on a patch from: Pali Rohár bug: https://bugzilla.kernel.org/show_bug.cgi?id=84431 Reviewed-by: Ben Skeggs Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Cc: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_vga.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/gpu/drm/nouveau/nouveau_vga.c b/drivers/gpu/drm/nouveau/nouveau_vga.c index 18d55d447248..c7592ec8ecb8 100644 --- a/drivers/gpu/drm/nouveau/nouveau_vga.c +++ b/drivers/gpu/drm/nouveau/nouveau_vga.c @@ -108,7 +108,16 @@ void nouveau_vga_fini(struct nouveau_drm *drm) { struct drm_device *dev = drm->dev; + bool runtime = false; + + if (nouveau_runtime_pm == 1) + runtime = true; + if ((nouveau_runtime_pm == -1) && (nouveau_is_optimus() || nouveau_is_v1_dsm())) + runtime = true; + vga_switcheroo_unregister_client(dev->pdev); + if (runtime && nouveau_is_v1_dsm() && !nouveau_is_optimus()) + vga_switcheroo_fini_domain_pm_ops(drm->dev->dev); vga_client_register(dev->pdev, NULL, NULL, NULL); } -- cgit v1.2.3 From 226b6d88d0c38bd0817660c79e3bea870dfeee4b Mon Sep 17 00:00:00 2001 From: Michel Dänzer Date: Fri, 19 Sep 2014 10:22:46 +0900 Subject: drm/radeon: Fix typo 'addr' -> 'entry' in rs400_gart_set_page MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=83996 Signed-off-by: Michel Dänzer Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/rs400.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/radeon/rs400.c b/drivers/gpu/drm/radeon/rs400.c index 6c1fc339d228..c5799f16aa4b 100644 --- a/drivers/gpu/drm/radeon/rs400.c +++ b/drivers/gpu/drm/radeon/rs400.c @@ -221,9 +221,9 @@ void rs400_gart_set_page(struct radeon_device *rdev, unsigned i, entry = (lower_32_bits(addr) & PAGE_MASK) | ((upper_32_bits(addr) & 0xff) << 4); if (flags & RADEON_GART_PAGE_READ) - addr |= RS400_PTE_READABLE; + entry |= RS400_PTE_READABLE; if (flags & RADEON_GART_PAGE_WRITE) - addr |= RS400_PTE_WRITEABLE; + entry |= RS400_PTE_WRITEABLE; if (!(flags & RADEON_GART_PAGE_SNOOP)) entry |= RS400_PTE_UNSNOOPED; entry = cpu_to_le32(entry); -- cgit v1.2.3 From db9bfd64b14a3a8f1868d2164518fdeab1b26ad1 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Wed, 3 Sep 2014 00:00:39 -0500 Subject: [SCSI] libiscsi: fix potential buffer overrun in __iscsi_conn_send_pdu This patches fixes a potential buffer overrun in __iscsi_conn_send_pdu. This function is used by iscsi drivers and userspace to send iscsi PDUs/ commands. For login commands, we have a set buffer size. For all other commands we do not support data buffers. This was reported by Dan Carpenter here: http://www.spinics.net/lists/linux-scsi/msg66838.html Reported-by: Dan Carpenter Signed-off-by: Mike Christie Reviewed-by: Sagi Grimberg Signed-off-by: Christoph Hellwig Cc: stable@vger.kernel.org Signed-off-by: James Bottomley --- drivers/scsi/libiscsi.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index ea025e4806b6..191b59793519 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -717,11 +717,21 @@ __iscsi_conn_send_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr, return NULL; } + if (data_size > ISCSI_DEF_MAX_RECV_SEG_LEN) { + iscsi_conn_printk(KERN_ERR, conn, "Invalid buffer len of %u for login task. Max len is %u\n", data_size, ISCSI_DEF_MAX_RECV_SEG_LEN); + return NULL; + } + task = conn->login_task; } else { if (session->state != ISCSI_STATE_LOGGED_IN) return NULL; + if (data_size != 0) { + iscsi_conn_printk(KERN_ERR, conn, "Can not send data buffer of len %u for op 0x%x\n", data_size, opcode); + return NULL; + } + BUG_ON(conn->c_stage == ISCSI_CONN_INITIAL_STAGE); BUG_ON(conn->c_stage == ISCSI_CONN_STOPPED); -- cgit v1.2.3 From e8be1cf58d5b4ddbf8089700df8458f432ed5934 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Fri, 12 Sep 2014 16:00:32 -0700 Subject: [SCSI] fix regression that accidentally disabled block-based tcq The scsi blk-mq support accidentally flipped a conditional, which lead to never enabling block based tcq when using the legacy request path. Fixes: d285203cf647d7c9 scsi: add support for a blk-mq based I/O path. Reported-by: Hans de Goede Signed-off-by: Christoph Hellwig Signed-off-by: James Bottomley --- include/scsi/scsi_tcq.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/scsi/scsi_tcq.h b/include/scsi/scsi_tcq.h index cdcc90b07ecb..e64583560701 100644 --- a/include/scsi/scsi_tcq.h +++ b/include/scsi/scsi_tcq.h @@ -68,7 +68,7 @@ static inline void scsi_activate_tcq(struct scsi_device *sdev, int depth) return; if (!shost_use_blk_mq(sdev->host) && - blk_queue_tagged(sdev->request_queue)) + !blk_queue_tagged(sdev->request_queue)) blk_queue_init_tags(sdev->request_queue, depth, sdev->host->bqt); -- cgit v1.2.3 From f81426a84bef870d26e5e752772d8ca203cd4aed Mon Sep 17 00:00:00 2001 From: Daniel Gryniewicz Date: Tue, 16 Sep 2014 10:41:13 -0400 Subject: [SCSI] fix for bidi use after free When ending a bi-directionional SCSI request, blk_finish_request() cleans up and frees the request, but scsi_release_bidi_buffers() tries to indirect through the request to find it's data buffers. This causes a panic due to a null pointer dereference. Move the call to scsi_release_bidi_buffers() before the call to blk_finish_request(). Signed-off-by: Daniel Gryniewicz Reviewed-by: Webb Scales Signed-off-by: Christoph Hellwig Signed-off-by: James Bottomley --- drivers/scsi/scsi_lib.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index d837dc180522..aaea4b98af16 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -733,12 +733,13 @@ static bool scsi_end_request(struct request *req, int error, } else { unsigned long flags; + if (bidi_bytes) + scsi_release_bidi_buffers(cmd); + spin_lock_irqsave(q->queue_lock, flags); blk_finish_request(req, error); spin_unlock_irqrestore(q->queue_lock, flags); - if (bidi_bytes) - scsi_release_bidi_buffers(cmd); scsi_release_buffers(cmd); scsi_next_command(cmd); } -- cgit v1.2.3 From 7312b5ddd47fee2356baa78c5516ef8e04eed452 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 17 Sep 2014 11:23:54 -0400 Subject: USB: EHCI: unlink QHs even after the controller has stopped Old code in ehci-hcd tries to expedite disabling endpoints after the controller has stopped, by destroying the endpoint's associated QH without first unlinking the QH. This was necessary back when the driver wasn't so careful about keeping track of the controller's state. But now we are careful about it, and the driver knows that when the controller isn't running, no unlinking delay is needed. Furthermore, skipping the unlink step will trigger a BUG() in qh_destroy() when the preceding QH is released, because the link pointer will be non-NULL. Removing the lines that skip the unlinking step and go directly to QH_STATE_IDLE fixes the problem. Signed-off-by: Alan Stern Reported-by: Joe Lawrence Tested-by: Joe Lawrence CC: Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-hcd.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 81cda09b47e3..488a30836c36 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -965,8 +965,6 @@ rescan: } qh->exception = 1; - if (ehci->rh_state < EHCI_RH_RUNNING) - qh->qh_state = QH_STATE_IDLE; switch (qh->qh_state) { case QH_STATE_LINKED: WARN_ON(!list_empty(&qh->qtd_list)); -- cgit v1.2.3 From 67d365a57a51fb9dece6a5ceb504aa381cae1e5b Mon Sep 17 00:00:00 2001 From: Mark Date: Tue, 16 Sep 2014 16:22:50 +0100 Subject: USB: storage: Add quirk for Adaptec USBConnect 2000 USB-to-SCSI Adapter The Adaptec USBConnect 2000 is another SCSI-USB converter which uses Shuttle Technology/SCM Microsystems chips. The US_FL_SCM_MULT_TARG quirk is required to use SCSI devices with ID other than 0. I don't have a USBConnect 2000, but based on the other entries for Shuttle/ SCM-based converters this patch is very likely correct. I used 0x0000 and 0x9999 for bcdDeviceMin and bcdDeviceMax because I'm not sure which bcdDevice value the product uses. Signed-off-by: Mark Knibbs Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 60cfcbc78552..5a95b19c9e7b 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -101,6 +101,12 @@ UNUSUAL_DEV( 0x03f0, 0x4002, 0x0001, 0x0001, "PhotoSmart R707", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_CAPACITY), +UNUSUAL_DEV( 0x03f3, 0x0001, 0x0000, 0x9999, + "Adaptec", + "USBConnect 2000", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init, + US_FL_SCM_MULT_TARG ), + /* Reported by Sebastian Kapfer * and Olaf Hering (different bcd's, same vendor/product) * for USB floppies that need the SINGLE_LUN enforcement. -- cgit v1.2.3 From b6a3ed677991558ce09046397a7c4d70530d15b3 Mon Sep 17 00:00:00 2001 From: Mark Date: Tue, 16 Sep 2014 16:51:41 +0100 Subject: USB: storage: Add quirk for Ariston Technologies iConnect USB to SCSI adapter Hi, The Ariston Technologies iConnect 025 and iConnect 050 (also known as e.g. iSCSI-50) are SCSI-USB converters which use Shuttle Technology/SCM Microsystems chips. Only the connectors differ; both have the same USB ID. The US_FL_SCM_MULT_TARG quirk is required to use SCSI devices with ID other than 0. I don't have one of these, but based on the other entries for Shuttle/ SCM-based converters this patch is very likely correct. I used 0x0000 and 0x9999 for bcdDeviceMin and bcdDeviceMax because I'm not sure which bcdDevice value the products use. Signed-off-by: Mark Knibbs Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 5a95b19c9e7b..b71e0bb1f73c 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1992,6 +1992,12 @@ UNUSUAL_DEV( 0x177f, 0x0400, 0x0000, 0x0000, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_BULK_IGNORE_TAG | US_FL_MAX_SECTORS_64 ), +UNUSUAL_DEV( 0x1822, 0x0001, 0x0000, 0x9999, + "Ariston Technologies", + "iConnect USB to SCSI adapter", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init, + US_FL_SCM_MULT_TARG ), + /* Reported by Hans de Goede * These Appotech controllers are found in Picture Frames, they provide a * (buggy) emulation of a cdrom drive which contains the windows software -- cgit v1.2.3 From c80b4495c61636edc58fe1ce300f09f24db28e10 Mon Sep 17 00:00:00 2001 From: Mark Date: Wed, 17 Sep 2014 19:15:43 +0100 Subject: USB: storage: Add quirks for Entrega/Xircom USB to SCSI converters This patch adds quirks for Entrega Technologies (later Xircom PortGear) USB- SCSI converters. They use Shuttle Technology EUSB-01/EUSB-S1 chips. The US_FL_SCM_MULT_TARG quirk is needed to allow multiple devices on the SCSI chain to be accessed. Without it only the (single) device with SCSI ID 0 can be used. The standalone converter sold by Entrega had model number U1-SC25. Xircom acquired Entrega and re-branded the product line PortGear. The PortGear USB to SCSI Converter (model PGSCSI) is internally identical to the Entrega product, but later models may use a different USB ID. The Entrega-branded units have USB ID 1645:0007, as does my Xircom PGSCSI, but the Windows and Macintosh drivers also support 085A:0028. Entrega also sold the "Mac USB Dock", which provides two USB ports, a Mac (8-pin mini-DIN) serial port and a SCSI port. It appears to the computer as a four-port hub, USB-serial, and USB-SCSI converters. The USB-SCSI part may have initially used the same ID as the standalone U1-SC25 (1645:0007), but later production used 085A:0026. My Xircom PortGear PGSCSI has bcdDevice=0x0100. Units with bcdDevice=0x0133 probably also exist. This patch adds quirks for 1645:0007, 085A:0026 and 085A:0028. The Windows driver INF file also mentions 085A:0032 "PortStation SCSI Module", but I couldn't find any mention of that actually existing in the wild; perhaps it was cancelled before release? Signed-off-by: Mark Knibbs Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index b71e0bb1f73c..4a5c68a47e46 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1131,6 +1131,18 @@ UNUSUAL_DEV( 0x0851, 0x1543, 0x0200, 0x0200, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE), +UNUSUAL_DEV( 0x085a, 0x0026, 0x0100, 0x0133, + "Xircom", + "PortGear USB-SCSI (Mac USB Dock)", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init, + US_FL_SCM_MULT_TARG ), + +UNUSUAL_DEV( 0x085a, 0x0028, 0x0100, 0x0133, + "Xircom", + "PortGear USB to SCSI Converter", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init, + US_FL_SCM_MULT_TARG ), + /* Submitted by Jan De Luyck */ UNUSUAL_DEV( 0x08bd, 0x1100, 0x0000, 0x0000, "CITIZEN", @@ -1970,6 +1982,14 @@ UNUSUAL_DEV( 0x152d, 0x2329, 0x0100, 0x0100, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE | US_FL_SANE_SENSE ), +/* Entrega Technologies U1-SC25 (later Xircom PortGear PGSCSI) + * and Mac USB Dock USB-SCSI */ +UNUSUAL_DEV( 0x1645, 0x0007, 0x0100, 0x0133, + "Entrega Technologies", + "USB to SCSI Converter", + USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init, + US_FL_SCM_MULT_TARG ), + /* Reported by Robert Schedel * Note: this is a 'super top' device like the above 14cd/6600 device */ UNUSUAL_DEV( 0x1652, 0x6600, 0x0201, 0x0201, -- cgit v1.2.3 From ed87c2b2e7dd34016017af183b8f3fbe28179bc1 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 19 Sep 2014 13:43:11 +0300 Subject: staging: vt6655: buffer overflow in ioctl ->u.generic_elem.len is a user controlled number between 0-255. We should limit it to avoid memory corruption. Signed-off-by: Dan Carpenter Signed-off-by: Greg Kroah-Hartman --- drivers/staging/vt6655/hostap.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/staging/vt6655/hostap.c b/drivers/staging/vt6655/hostap.c index f105c2ac091b..164136b07a68 100644 --- a/drivers/staging/vt6655/hostap.c +++ b/drivers/staging/vt6655/hostap.c @@ -350,6 +350,9 @@ static int hostap_set_generic_element(PSDevice pDevice, { PSMgmtObject pMgmt = pDevice->pMgmt; + if (param->u.generic_elem.len > sizeof(pMgmt->abyWPAIE)) + return -EINVAL; + memcpy(pMgmt->abyWPAIE, param->u.generic_elem.data, param->u.generic_elem.len -- cgit v1.2.3 From c52670919c7ffcf839c7665e5a53d8ee68aabfb0 Mon Sep 17 00:00:00 2001 From: Gerd Hoffmann Date: Fri, 19 Sep 2014 10:11:36 +0200 Subject: drm/cirrus: add missing drm_connector_register call Signed-off-by: Gerd Hoffmann Signed-off-by: Dave Airlie --- drivers/gpu/drm/cirrus/cirrus_mode.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/cirrus/cirrus_mode.c b/drivers/gpu/drm/cirrus/cirrus_mode.c index e1c5c3222129..c7c5a9d91fa0 100644 --- a/drivers/gpu/drm/cirrus/cirrus_mode.c +++ b/drivers/gpu/drm/cirrus/cirrus_mode.c @@ -555,6 +555,7 @@ static struct drm_connector *cirrus_vga_init(struct drm_device *dev) drm_connector_helper_add(connector, &cirrus_vga_connector_helper_funcs); + drm_connector_register(connector); return connector; } -- cgit v1.2.3 From b1fb01241b515641e11263fcc628242d9aeb56ff Mon Sep 17 00:00:00 2001 From: Gerd Hoffmann Date: Fri, 19 Sep 2014 10:11:37 +0200 Subject: drm/bochs: add missing drm_connector_register call Signed-off-by: Gerd Hoffmann Signed-off-by: Dave Airlie --- drivers/gpu/drm/bochs/bochs_kms.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/bochs/bochs_kms.c b/drivers/gpu/drm/bochs/bochs_kms.c index 9d7346b92653..6b7efcf363d6 100644 --- a/drivers/gpu/drm/bochs/bochs_kms.c +++ b/drivers/gpu/drm/bochs/bochs_kms.c @@ -250,6 +250,7 @@ static void bochs_connector_init(struct drm_device *dev) DRM_MODE_CONNECTOR_VIRTUAL); drm_connector_helper_add(connector, &bochs_connector_connector_helper_funcs); + drm_connector_register(connector); } -- cgit v1.2.3 From fe3d9c4b87bb98222a502cc585844a0b950786fb Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Sat, 20 Sep 2014 17:39:00 +1000 Subject: drm/nouveau: ltc/gf100-: fix cbc issues on certain boards A mismatch between FB and LTC's idea of how big a large page is causes issues such as black "holes" in rendering to occur on some boards (those where LTC is configured for 64KiB large pages) when compression is used. Confirmed to fix at least the GK107 MBP. Signed-off-by: Ben Skeggs Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/nouveau/core/subdev/bar/nvc0.c | 1 - drivers/gpu/drm/nouveau/core/subdev/fb/nvc0.c | 1 + drivers/gpu/drm/nouveau/core/subdev/ltc/gf100.c | 2 ++ drivers/gpu/drm/nouveau/core/subdev/ltc/gk104.c | 2 ++ drivers/gpu/drm/nouveau/core/subdev/ltc/gm107.c | 2 ++ 5 files changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/core/subdev/bar/nvc0.c b/drivers/gpu/drm/nouveau/core/subdev/bar/nvc0.c index 0a44459844e3..05a278bab247 100644 --- a/drivers/gpu/drm/nouveau/core/subdev/bar/nvc0.c +++ b/drivers/gpu/drm/nouveau/core/subdev/bar/nvc0.c @@ -200,7 +200,6 @@ nvc0_bar_init(struct nouveau_object *object) nv_mask(priv, 0x000200, 0x00000100, 0x00000000); nv_mask(priv, 0x000200, 0x00000100, 0x00000100); - nv_mask(priv, 0x100c80, 0x00000001, 0x00000000); nv_wr32(priv, 0x001704, 0x80000000 | priv->bar[1].mem->addr >> 12); if (priv->bar[0].mem) diff --git a/drivers/gpu/drm/nouveau/core/subdev/fb/nvc0.c b/drivers/gpu/drm/nouveau/core/subdev/fb/nvc0.c index b19a2b3c1081..32f28dc73ef2 100644 --- a/drivers/gpu/drm/nouveau/core/subdev/fb/nvc0.c +++ b/drivers/gpu/drm/nouveau/core/subdev/fb/nvc0.c @@ -60,6 +60,7 @@ nvc0_fb_init(struct nouveau_object *object) if (priv->r100c10_page) nv_wr32(priv, 0x100c10, priv->r100c10 >> 8); + nv_mask(priv, 0x100c80, 0x00000001, 0x00000000); /* 128KiB lpg */ return 0; } diff --git a/drivers/gpu/drm/nouveau/core/subdev/ltc/gf100.c b/drivers/gpu/drm/nouveau/core/subdev/ltc/gf100.c index b54b582e72c4..d5d65285efe5 100644 --- a/drivers/gpu/drm/nouveau/core/subdev/ltc/gf100.c +++ b/drivers/gpu/drm/nouveau/core/subdev/ltc/gf100.c @@ -98,6 +98,7 @@ static int gf100_ltc_init(struct nouveau_object *object) { struct nvkm_ltc_priv *priv = (void *)object; + u32 lpg128 = !(nv_rd32(priv, 0x100c80) & 0x00000001); int ret; ret = nvkm_ltc_init(priv); @@ -107,6 +108,7 @@ gf100_ltc_init(struct nouveau_object *object) nv_mask(priv, 0x17e820, 0x00100000, 0x00000000); /* INTR_EN &= ~0x10 */ nv_wr32(priv, 0x17e8d8, priv->ltc_nr); nv_wr32(priv, 0x17e8d4, priv->tag_base); + nv_mask(priv, 0x17e8c0, 0x00000002, lpg128 ? 0x00000002 : 0x00000000); return 0; } diff --git a/drivers/gpu/drm/nouveau/core/subdev/ltc/gk104.c b/drivers/gpu/drm/nouveau/core/subdev/ltc/gk104.c index ea716569745d..b39b5d0eb8f9 100644 --- a/drivers/gpu/drm/nouveau/core/subdev/ltc/gk104.c +++ b/drivers/gpu/drm/nouveau/core/subdev/ltc/gk104.c @@ -28,6 +28,7 @@ static int gk104_ltc_init(struct nouveau_object *object) { struct nvkm_ltc_priv *priv = (void *)object; + u32 lpg128 = !(nv_rd32(priv, 0x100c80) & 0x00000001); int ret; ret = nvkm_ltc_init(priv); @@ -37,6 +38,7 @@ gk104_ltc_init(struct nouveau_object *object) nv_wr32(priv, 0x17e8d8, priv->ltc_nr); nv_wr32(priv, 0x17e000, priv->ltc_nr); nv_wr32(priv, 0x17e8d4, priv->tag_base); + nv_mask(priv, 0x17e8c0, 0x00000002, lpg128 ? 0x00000002 : 0x00000000); return 0; } diff --git a/drivers/gpu/drm/nouveau/core/subdev/ltc/gm107.c b/drivers/gpu/drm/nouveau/core/subdev/ltc/gm107.c index 4761b2e9af00..a4de64289762 100644 --- a/drivers/gpu/drm/nouveau/core/subdev/ltc/gm107.c +++ b/drivers/gpu/drm/nouveau/core/subdev/ltc/gm107.c @@ -98,6 +98,7 @@ static int gm107_ltc_init(struct nouveau_object *object) { struct nvkm_ltc_priv *priv = (void *)object; + u32 lpg128 = !(nv_rd32(priv, 0x100c80) & 0x00000001); int ret; ret = nvkm_ltc_init(priv); @@ -106,6 +107,7 @@ gm107_ltc_init(struct nouveau_object *object) nv_wr32(priv, 0x17e27c, priv->ltc_nr); nv_wr32(priv, 0x17e278, priv->tag_base); + nv_mask(priv, 0x17e264, 0x00000002, lpg128 ? 0x00000002 : 0x00000000); return 0; } -- cgit v1.2.3 From 0f33be009b89d2268e94194dc4fd01a7851b6d51 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 21 Sep 2014 15:43:02 -0700 Subject: Linux 3.17-rc6 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 036b7331d7b4..a192280a883d 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 17 SUBLEVEL = 0 -EXTRAVERSION = -rc5 +EXTRAVERSION = -rc6 NAME = Shuffling Zombie Juror # *DOCUMENTATION* -- cgit v1.2.3