From e0f6c370f0ad2b02637ba4ead082d39cc9a1b094 Mon Sep 17 00:00:00 2001 From: Aleksa Savic Date: Tue, 31 Jan 2023 11:12:09 +0100 Subject: hwmon: (aquacomputer_d5next) Add support for Aquacomputer Poweradjust 3 Extend aquacomputer_d5next driver to expose the temp sensor of the Aquacomputer Poweradjust 3 fan controller, which communicates through a proprietary USB HID protocol. The Poweradjust 3 is not currently known to expose firmware version and serial number, so don't create debugfs entries if their values can't be retrieved. Tested by a user on Github [1]. [1] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/issues/57 Signed-off-by: Aleksa Savic Link: https://lore.kernel.org/r/20230131101210.8095-1-savicaleksa83@gmail.com Signed-off-by: Guenter Roeck --- Documentation/hwmon/aquacomputer_d5next.rst | 3 + drivers/hwmon/aquacomputer_d5next.c | 88 ++++++++++++++++++++++++++--- 2 files changed, 84 insertions(+), 7 deletions(-) diff --git a/Documentation/hwmon/aquacomputer_d5next.rst b/Documentation/hwmon/aquacomputer_d5next.rst index 3f7880fb8116..527bcd3edda9 100644 --- a/Documentation/hwmon/aquacomputer_d5next.rst +++ b/Documentation/hwmon/aquacomputer_d5next.rst @@ -12,6 +12,7 @@ Supported devices: * Aquacomputer Octo fan controller * Aquacomputer Quadro fan controller * Aquacomputer High Flow Next sensor +* Aquacomputer Poweradjust 3 fan controller Author: Aleksa Savic @@ -53,6 +54,8 @@ The High Flow Next exposes +5V voltages, water quality, conductivity and flow re A temperature sensor can be connected to it, in which case it provides its reading and an estimation of the dissipated/absorbed power in the liquid cooling loop. +The Poweradjust 3 controller exposes a single external temperature sensor. + Depending on the device, not all sysfs and debugfs entries will be available. Writing to virtual temperature sensors is not currently supported. diff --git a/drivers/hwmon/aquacomputer_d5next.c b/drivers/hwmon/aquacomputer_d5next.c index c1b885240ddf..2945b630b4a0 100644 --- a/drivers/hwmon/aquacomputer_d5next.c +++ b/drivers/hwmon/aquacomputer_d5next.c @@ -4,7 +4,8 @@ * Quadro, High Flow Next, Aquaero) * * Aquacomputer devices send HID reports (with ID 0x01) every second to report - * sensor values. + * sensor values, except for devices that communicate through the + * legacy way (currently, Poweradjust 3). * * Copyright 2021 Aleksa Savic * Copyright 2022 Jack Doan @@ -28,8 +29,9 @@ #define USB_PRODUCT_ID_FARBWERK360 0xf010 #define USB_PRODUCT_ID_OCTO 0xf011 #define USB_PRODUCT_ID_HIGHFLOWNEXT 0xf012 +#define USB_PRODUCT_ID_POWERADJUST3 0xf0bd -enum kinds { d5next, farbwerk, farbwerk360, octo, quadro, highflownext, aquaero }; +enum kinds { d5next, farbwerk, farbwerk360, octo, quadro, highflownext, aquaero, poweradjust3 }; static const char *const aqc_device_names[] = { [d5next] = "d5next", @@ -38,7 +40,8 @@ static const char *const aqc_device_names[] = { [octo] = "octo", [quadro] = "quadro", [highflownext] = "highflownext", - [aquaero] = "aquaero" + [aquaero] = "aquaero", + [poweradjust3] = "poweradjust3" }; #define DRIVER_NAME "aquacomputer_d5next" @@ -59,6 +62,9 @@ static u8 secondary_ctrl_report[] = { 0x02, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x34, 0xC6 }; +/* Report IDs for legacy devices */ +#define POWERADJUST3_STATUS_REPORT_ID 0x03 + /* Info, sensor sizes and offsets for most Aquacomputer devices */ #define AQC_SERIAL_START 0x3 #define AQC_FIRMWARE_VERSION 0xD @@ -176,6 +182,13 @@ static u16 quadro_ctrl_fan_offsets[] = { 0x37, 0x8c, 0xe1, 0x136 }; /* Fan speed #define HIGHFLOWNEXT_5V_VOLTAGE 97 #define HIGHFLOWNEXT_5V_VOLTAGE_USB 99 +/* Specs of the Poweradjust 3 */ +#define POWERADJUST3_NUM_SENSORS 1 +#define POWERADJUST3_SENSOR_REPORT_SIZE 0x32 + +/* Sensor report offsets for the Poweradjust 3 */ +#define POWERADJUST3_SENSOR_START 0x03 + /* Labels for D5 Next */ static const char *const label_d5next_temp[] = { "Coolant temp" @@ -326,6 +339,11 @@ static const char *const label_highflownext_voltage[] = { "+5V USB voltage" }; +/* Labels for Poweradjust 3 */ +static const char *const label_poweradjust3_temp_sensors[] = { + "External sensor" +}; + struct aqc_fan_structure_offsets { u8 voltage; u8 curr; @@ -357,6 +375,8 @@ struct aqc_data { enum kinds kind; const char *name; + int status_report_id; /* Used for legacy devices, report is stored in buffer */ + int buffer_size; u8 *buffer; int checksum_start; @@ -615,14 +635,49 @@ static umode_t aqc_is_visible(const void *data, enum hwmon_sensor_types type, u3 return 0; } +/* Read device sensors by manually requesting the sensor report (legacy way) */ +static int aqc_legacy_read(struct aqc_data *priv) +{ + int ret, i, sensor_value; + + mutex_lock(&priv->mutex); + + memset(priv->buffer, 0x00, priv->buffer_size); + ret = hid_hw_raw_request(priv->hdev, priv->status_report_id, priv->buffer, + priv->buffer_size, HID_FEATURE_REPORT, HID_REQ_GET_REPORT); + if (ret < 0) + goto unlock_and_return; + + /* Temperature sensor readings */ + for (i = 0; i < priv->num_temp_sensors; i++) { + sensor_value = get_unaligned_le16(priv->buffer + priv->temp_sensor_start_offset + + i * AQC_SENSOR_SIZE); + priv->temp_input[i] = sensor_value * 10; + } + + priv->updated = jiffies; + +unlock_and_return: + mutex_unlock(&priv->mutex); + return ret; +} + static int aqc_read(struct device *dev, enum hwmon_sensor_types type, u32 attr, int channel, long *val) { int ret; struct aqc_data *priv = dev_get_drvdata(dev); - if (time_after(jiffies, priv->updated + STATUS_UPDATE_INTERVAL)) - return -ENODATA; + if (time_after(jiffies, priv->updated + STATUS_UPDATE_INTERVAL)) { + if (priv->status_report_id != 0) { + /* Legacy devices require manual reads */ + ret = aqc_legacy_read(priv); + if (ret < 0) + return -ENODATA; + } else { + return -ENODATA; + } + } switch (type) { case hwmon_temp: @@ -1014,9 +1069,13 @@ static void aqc_debugfs_init(struct aqc_data *priv) dev_name(&priv->hdev->dev)); priv->debugfs = debugfs_create_dir(name, NULL); - debugfs_create_file("serial_number", 0444, priv->debugfs, priv, &serial_number_fops); - debugfs_create_file("firmware_version", 0444, priv->debugfs, priv, &firmware_version_fops); + if (priv->serial_number_start_offset != 0) + debugfs_create_file("serial_number", 0444, priv->debugfs, priv, + &serial_number_fops); + if (priv->firmware_version_offset != 0) + debugfs_create_file("firmware_version", 0444, priv->debugfs, priv, + &firmware_version_fops); if (priv->power_cycle_count_offset != 0) debugfs_create_file("power_cycles", 0444, priv->debugfs, priv, &power_cycles_fops); } @@ -1214,6 +1273,17 @@ static int aqc_probe(struct hid_device *hdev, const struct hid_device_id *id) priv->power_label = label_highflownext_power; priv->voltage_label = label_highflownext_voltage; break; + case USB_PRODUCT_ID_POWERADJUST3: + priv->kind = poweradjust3; + + priv->num_fans = 0; + + priv->num_temp_sensors = POWERADJUST3_NUM_SENSORS; + priv->temp_sensor_start_offset = POWERADJUST3_SENSOR_START; + priv->buffer_size = POWERADJUST3_SENSOR_REPORT_SIZE; + + priv->temp_label = label_poweradjust3_temp_sensors; + break; default: break; } @@ -1225,6 +1295,9 @@ static int aqc_probe(struct hid_device *hdev, const struct hid_device_id *id) priv->fan_structure = &aqc_aquaero_fan_structure; break; + case poweradjust3: + priv->status_report_id = POWERADJUST3_STATUS_REPORT_ID; + break; default: priv->serial_number_start_offset = AQC_SERIAL_START; priv->firmware_version_offset = AQC_FIRMWARE_VERSION; @@ -1287,6 +1360,7 @@ static const struct hid_device_id aqc_table[] = { { HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_OCTO) }, { HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_QUADRO) }, { HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_HIGHFLOWNEXT) }, + { HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_POWERADJUST3) }, { } }; -- cgit v1.2.3