From f6cd66231aa58599526584ff4df1bdde8d86eac8 Mon Sep 17 00:00:00 2001 From: Valentin Caron Date: Mon, 18 Dec 2023 16:57:15 +0100 Subject: spi: stm32: add st,stm32mp25-spi compatible supporting STM32MP25 soc Add support for the STM32MP25: - Burst should not be enabled with the new DMA used on STM32MP25. - STM32MP25 SPI8 has a limited feature set, it can only send words of 8 or 16 bits and with a maximum words number of 1024. Signed-off-by: Valentin Caron Signed-off-by: Alain Volmat Link: https://msgid.link/r/20231218155721.359198-4-alain.volmat@foss.st.com Signed-off-by: Mark Brown --- drivers/spi/spi-stm32.c | 132 +++++++++++++++++++++++++++++++++++++++++++----- 1 file changed, 120 insertions(+), 12 deletions(-) diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c index af0c27d8d704..e61302ef3c21 100644 --- a/drivers/spi/spi-stm32.c +++ b/drivers/spi/spi-stm32.c @@ -154,6 +154,20 @@ /* STM32H7_SPI_I2SCFGR bit fields */ #define STM32H7_SPI_I2SCFGR_I2SMOD BIT(0) +/* STM32MP25 SPI registers bit fields */ +#define STM32MP25_SPI_HWCFGR1 0x3F0 + +/* STM32MP25_SPI_CR2 bit fields */ +#define STM32MP25_SPI_TSIZE_MAX_LIMITED GENMASK(9, 0) + +/* STM32MP25_SPI_HWCFGR1 */ +#define STM32MP25_SPI_HWCFGR1_FULLCFG GENMASK(27, 24) +#define STM32MP25_SPI_HWCFGR1_FULLCFG_LIMITED 0x0 +#define STM32MP25_SPI_HWCFGR1_FULLCFG_FULL 0x1 +#define STM32MP25_SPI_HWCFGR1_DSCFG GENMASK(19, 16) +#define STM32MP25_SPI_HWCFGR1_DSCFG_16_B 0x0 +#define STM32MP25_SPI_HWCFGR1_DSCFG_32_B 0x1 + /* STM32H7 SPI Master Baud Rate min/max divisor */ #define STM32H7_SPI_MBR_DIV_MIN (2 << STM32H7_SPI_CFG1_MBR_MIN) #define STM32H7_SPI_MBR_DIV_MAX (2 << STM32H7_SPI_CFG1_MBR_MAX) @@ -207,6 +221,7 @@ struct stm32_spi_reg { * @br: baud rate register and bitfields * @rx: SPI RX data register * @tx: SPI TX data register + * @fullcfg: SPI full or limited feature set register */ struct stm32_spi_regspec { const struct stm32_spi_reg en; @@ -219,6 +234,7 @@ struct stm32_spi_regspec { const struct stm32_spi_reg br; const struct stm32_spi_reg rx; const struct stm32_spi_reg tx; + const struct stm32_spi_reg fullcfg; }; struct stm32_spi; @@ -250,6 +266,7 @@ struct stm32_spi; * @has_fifo: boolean to know if fifo is used for driver * @has_device_mode: is this compatible capable to switch on device mode * @flags: compatible specific SPI controller flags used at registration time + * @prevent_dma_burst: boolean to indicate to prevent DMA burst */ struct stm32_spi_cfg { const struct stm32_spi_regspec *regs; @@ -274,6 +291,7 @@ struct stm32_spi_cfg { bool has_fifo; bool has_device_mode; u16 flags; + bool prevent_dma_burst; }; /** @@ -287,6 +305,8 @@ struct stm32_spi_cfg { * @lock: prevent I/O concurrent access * @irq: SPI controller interrupt line * @fifo_size: size of the embedded fifo in bytes + * @t_size_max: maximum number of data of one transfer + * @feature_set: SPI full or limited feature set * @cur_midi: host inter-data idleness in ns * @cur_speed: speed configured in Hz * @cur_half_period: time of a half bit in us @@ -314,6 +334,10 @@ struct stm32_spi { spinlock_t lock; /* prevent I/O concurrent access */ int irq; unsigned int fifo_size; + unsigned int t_size_max; + unsigned int feature_set; +#define STM32_SPI_FEATURE_LIMITED STM32MP25_SPI_HWCFGR1_FULLCFG_LIMITED /* 0x0 */ +#define STM32_SPI_FEATURE_FULL STM32MP25_SPI_HWCFGR1_FULLCFG_FULL /* 0x1 */ unsigned int cur_midi; unsigned int cur_speed; @@ -371,6 +395,28 @@ static const struct stm32_spi_regspec stm32h7_spi_regspec = { .tx = { STM32H7_SPI_TXDR }, }; +static const struct stm32_spi_regspec stm32mp25_spi_regspec = { + /* SPI data transfer is enabled but spi_ker_ck is idle. + * CFG1 and CFG2 registers are write protected when SPE is enabled. + */ + .en = { STM32H7_SPI_CR1, STM32H7_SPI_CR1_SPE }, + + .dma_rx_en = { STM32H7_SPI_CFG1, STM32H7_SPI_CFG1_RXDMAEN }, + .dma_tx_en = { STM32H7_SPI_CFG1, STM32H7_SPI_CFG1_TXDMAEN }, + + .cpol = { STM32H7_SPI_CFG2, STM32H7_SPI_CFG2_CPOL }, + .cpha = { STM32H7_SPI_CFG2, STM32H7_SPI_CFG2_CPHA }, + .lsb_first = { STM32H7_SPI_CFG2, STM32H7_SPI_CFG2_LSBFRST }, + .cs_high = { STM32H7_SPI_CFG2, STM32H7_SPI_CFG2_SSIOP }, + .br = { STM32H7_SPI_CFG1, STM32H7_SPI_CFG1_MBR, + STM32H7_SPI_CFG1_MBR_SHIFT }, + + .rx = { STM32H7_SPI_RXDR }, + .tx = { STM32H7_SPI_TXDR }, + + .fullcfg = { STM32MP25_SPI_HWCFGR1, STM32MP25_SPI_HWCFGR1_FULLCFG }, +}; + static inline void stm32_spi_set_bits(struct stm32_spi *spi, u32 offset, u32 bits) { @@ -457,6 +503,28 @@ static int stm32h7_spi_get_bpw_mask(struct stm32_spi *spi) return SPI_BPW_RANGE_MASK(4, max_bpw); } +/** + * stm32mp25_spi_get_bpw_mask - Return bits per word mask + * @spi: pointer to the spi controller data structure + */ +static int stm32mp25_spi_get_bpw_mask(struct stm32_spi *spi) +{ + u32 dscfg, max_bpw; + + if (spi->feature_set == STM32_SPI_FEATURE_LIMITED) { + dev_dbg(spi->dev, "8-bit or 16-bit data frame supported\n"); + return SPI_BPW_MASK(8) | SPI_BPW_MASK(16); + } + + dscfg = FIELD_GET(STM32MP25_SPI_HWCFGR1_DSCFG, + readl_relaxed(spi->base + STM32MP25_SPI_HWCFGR1)); + max_bpw = 16; + if (dscfg == STM32MP25_SPI_HWCFGR1_DSCFG_32_B) + max_bpw = 32; + dev_dbg(spi->dev, "%d-bit maximum data frame\n", max_bpw); + return SPI_BPW_RANGE_MASK(4, max_bpw); +} + /** * stm32_spi_prepare_mbr - Determine baud rate divisor value * @spi: pointer to the spi controller data structure @@ -1103,7 +1171,7 @@ static int stm32_spi_prepare_msg(struct spi_controller *ctrl, int ret; ret = spi_split_transfers_maxwords(ctrl, msg, - STM32H7_SPI_TSIZE_MAX, + spi->t_size_max, GFP_KERNEL | GFP_DMA); if (ret) return ret; @@ -1168,7 +1236,7 @@ static void stm32_spi_dma_config(struct stm32_spi *spi, { enum dma_slave_buswidth buswidth; struct dma_slave_caps caps; - u32 maxburst; + u32 maxburst = 1; int ret; if (spi->cur_bpw <= 8) @@ -1178,15 +1246,9 @@ static void stm32_spi_dma_config(struct stm32_spi *spi, else buswidth = DMA_SLAVE_BUSWIDTH_4_BYTES; - if (spi->cfg->has_fifo) { - /* Valid for DMA Half or Full Fifo threshold */ - if (spi->cur_fthlv == 2) - maxburst = 1; - else - maxburst = spi->cur_fthlv; - } else { - maxburst = 1; - } + /* Valid for DMA Half or Full Fifo threshold */ + if (!spi->cfg->prevent_dma_burst && spi->cfg->has_fifo && spi->cur_fthlv != 2) + maxburst = spi->cur_fthlv; /* Get the DMA channel caps, and adjust maxburst if possible */ ret = dma_get_slave_caps(dma_chan, &caps); @@ -1671,7 +1733,7 @@ static void stm32h7_spi_data_idleness(struct stm32_spi *spi, u32 len) */ static int stm32h7_spi_number_of_data(struct stm32_spi *spi, u32 nb_words) { - if (nb_words <= STM32H7_SPI_TSIZE_MAX) { + if (nb_words <= spi->t_size_max) { writel_relaxed(FIELD_PREP(STM32H7_SPI_CR2_TSIZE, nb_words), spi->base + STM32H7_SPI_CR2); } else { @@ -1954,7 +2016,37 @@ static const struct stm32_spi_cfg stm32h7_spi_cfg = { .has_device_mode = true, }; +/* + * STM32MP2 is compatible with the STM32H7 except: + * - enforce the DMA maxburst value to 1 + * - spi8 have limited feature set (TSIZE_MAX = 1024, BPW of 8 OR 16) + */ +static const struct stm32_spi_cfg stm32mp25_spi_cfg = { + .regs = &stm32mp25_spi_regspec, + .get_fifo_size = stm32h7_spi_get_fifo_size, + .get_bpw_mask = stm32mp25_spi_get_bpw_mask, + .disable = stm32h7_spi_disable, + .config = stm32h7_spi_config, + .set_bpw = stm32h7_spi_set_bpw, + .set_mode = stm32h7_spi_set_mode, + .set_data_idleness = stm32h7_spi_data_idleness, + .set_number_of_data = stm32h7_spi_number_of_data, + .transfer_one_dma_start = stm32h7_spi_transfer_one_dma_start, + .dma_rx_cb = stm32_spi_dma_rx_cb, + /* + * dma_tx_cb is not necessary since in case of TX, dma is followed by + * SPI access hence handling is performed within the SPI interrupt + */ + .transfer_one_irq = stm32h7_spi_transfer_one_irq, + .irq_handler_thread = stm32h7_spi_irq_thread, + .baud_rate_div_min = STM32H7_SPI_MBR_DIV_MIN, + .baud_rate_div_max = STM32H7_SPI_MBR_DIV_MAX, + .has_fifo = true, + .prevent_dma_burst = true, +}; + static const struct of_device_id stm32_spi_of_match[] = { + { .compatible = "st,stm32mp25-spi", .data = (void *)&stm32mp25_spi_cfg }, { .compatible = "st,stm32h7-spi", .data = (void *)&stm32h7_spi_cfg }, { .compatible = "st,stm32f4-spi", .data = (void *)&stm32f4_spi_cfg }, { .compatible = "st,stm32f7-spi", .data = (void *)&stm32f7_spi_cfg }, @@ -2058,6 +2150,22 @@ static int stm32_spi_probe(struct platform_device *pdev) if (spi->cfg->has_fifo) spi->fifo_size = spi->cfg->get_fifo_size(spi); + spi->feature_set = STM32_SPI_FEATURE_FULL; + if (spi->cfg->regs->fullcfg.reg) { + spi->feature_set = + FIELD_GET(STM32MP25_SPI_HWCFGR1_FULLCFG, + readl_relaxed(spi->base + spi->cfg->regs->fullcfg.reg)); + + dev_dbg(spi->dev, "%s feature set\n", + spi->feature_set == STM32_SPI_FEATURE_FULL ? "full" : "limited"); + } + + /* Only for STM32H7 and after */ + spi->t_size_max = spi->feature_set == STM32_SPI_FEATURE_FULL ? + STM32H7_SPI_TSIZE_MAX : + STM32MP25_SPI_TSIZE_MAX_LIMITED; + dev_dbg(spi->dev, "one message max size %d\n", spi->t_size_max); + ret = spi->cfg->config(spi); if (ret) { dev_err(&pdev->dev, "controller configuration failed: %d\n", -- cgit v1.2.3