From 86116f4d649bec311bbf3ee50a1eb582e3fcfd9c Mon Sep 17 00:00:00 2001 From: Pawel Dembicki Date: Fri, 5 Jul 2019 00:29:04 +0200 Subject: net: dsa: Change DT bindings for Vitesse VSC73xx switches This commit introduce how to use vsc73xx platform driver. Signed-off-by: Pawel Dembicki Reviewed-by: Linus Walleij Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- .../bindings/net/dsa/vitesse,vsc73xx.txt | 58 ++++++++++++++++++++-- 1 file changed, 54 insertions(+), 4 deletions(-) (limited to 'Documentation/devicetree/bindings/net/dsa') diff --git a/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.txt b/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.txt index ed4710c40641..bbf4a13f6d75 100644 --- a/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.txt +++ b/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.txt @@ -2,8 +2,8 @@ Vitesse VSC73xx Switches ======================== This defines device tree bindings for the Vitesse VSC73xx switch chips. -The Vitesse company has been acquired by Microsemi and Microsemi in turn -acquired by Microchip but retains this vendor branding. +The Vitesse company has been acquired by Microsemi and Microsemi has +been acquired Microchip but retains this vendor branding. The currently supported switch chips are: Vitesse VSC7385 SparX-G5 5+1-port Integrated Gigabit Ethernet Switch @@ -11,8 +11,14 @@ Vitesse VSC7388 SparX-G8 8-port Integrated Gigabit Ethernet Switch Vitesse VSC7395 SparX-G5e 5+1-port Integrated Gigabit Ethernet Switch Vitesse VSC7398 SparX-G8e 8-port Integrated Gigabit Ethernet Switch -The device tree node is an SPI device so it must reside inside a SPI bus -device tree node, see spi/spi-bus.txt +This switch could have two different management interface. + +If SPI interface is used, the device tree node is an SPI device so it must +reside inside a SPI bus device tree node, see spi/spi-bus.txt + +When the chip is connected to a parallel memory bus and work in memory-mapped +I/O mode, a platform device is used to represent the vsc73xx. In this case it +must reside inside a platform bus device tree node. Required properties: @@ -38,6 +44,7 @@ and subnodes of DSA switches. Examples: +SPI: switch@0 { compatible = "vitesse,vsc7395"; reg = <0>; @@ -79,3 +86,46 @@ switch@0 { }; }; }; + +Platform: +switch@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "vitesse,vsc7385"; + reg = <0x2 0x0 0x20000>; + reset-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan1"; + }; + port@1 { + reg = <1>; + label = "lan2"; + }; + port@2 { + reg = <2>; + label = "lan3"; + }; + port@3 { + reg = <3>; + label = "lan4"; + }; + vsc: port@6 { + reg = <6>; + label = "cpu"; + ethernet = <&enet0>; + phy-mode = "rgmii"; + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + }; + +}; -- cgit v1.2.3