From 4d521943f76bd0d1e68ea5e02df7aadd30b2838a Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Mon, 26 Oct 2020 16:36:20 +0100 Subject: dt-bindings: net: correct interrupt flags in examples GPIO_ACTIVE_x flags are not correct in the context of interrupt flags. These are simple defines so they could be used in DTS but they will not have the same meaning: 1. GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE 2. GPIO_ACTIVE_LOW = 1 = IRQ_TYPE_EDGE_RISING Correct the interrupt flags, assuming the author of the code wanted same logical behavior behind the name "ACTIVE_xxx", this is: ACTIVE_LOW => IRQ_TYPE_LEVEL_LOW ACTIVE_HIGH => IRQ_TYPE_LEVEL_HIGH Fixes: a1a8b4594f8d ("NFC: pn544: i2c: Add DTS Documentation") Fixes: 6be88670fc59 ("NFC: nxp-nci_i2c: Add I2C support to NXP NCI driver") Fixes: e3b329221567 ("dt-bindings: can: tcan4x5x: Update binding to use interrupt property") Signed-off-by: Krzysztof Kozlowski Acked-by: Rob Herring Acked-by: Marc Kleine-Budde # for tcan4x5x.txt Link: https://lore.kernel.org/r/20201026153620.89268-1-krzk@kernel.org Signed-off-by: Jakub Kicinski --- Documentation/devicetree/bindings/net/can/tcan4x5x.txt | 2 +- Documentation/devicetree/bindings/net/nfc/nxp-nci.txt | 2 +- Documentation/devicetree/bindings/net/nfc/pn544.txt | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt index 3613c2c8f75d..0968b40aef1e 100644 --- a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt +++ b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt @@ -33,7 +33,7 @@ tcan4x5x: tcan4x5x@0 { spi-max-frequency = <10000000>; bosch,mram-cfg = <0x0 0 0 32 0 0 1 1>; interrupt-parent = <&gpio1>; - interrupts = <14 GPIO_ACTIVE_LOW>; + interrupts = <14 IRQ_TYPE_LEVEL_LOW>; device-state-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; device-wake-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; reset-gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>; diff --git a/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt b/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt index cfaf88998918..9e4dc510a40a 100644 --- a/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt +++ b/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt @@ -25,7 +25,7 @@ Example (for ARM-based BeagleBone with NPC100 NFC controller on I2C2): clock-frequency = <100000>; interrupt-parent = <&gpio1>; - interrupts = <29 GPIO_ACTIVE_HIGH>; + interrupts = <29 IRQ_TYPE_LEVEL_HIGH>; enable-gpios = <&gpio0 30 GPIO_ACTIVE_HIGH>; firmware-gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>; diff --git a/Documentation/devicetree/bindings/net/nfc/pn544.txt b/Documentation/devicetree/bindings/net/nfc/pn544.txt index 92f399ec22b8..2bd82562ce8e 100644 --- a/Documentation/devicetree/bindings/net/nfc/pn544.txt +++ b/Documentation/devicetree/bindings/net/nfc/pn544.txt @@ -25,7 +25,7 @@ Example (for ARM-based BeagleBone with PN544 on I2C2): clock-frequency = <400000>; interrupt-parent = <&gpio1>; - interrupts = <17 GPIO_ACTIVE_HIGH>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH>; enable-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; firmware-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; -- cgit v1.2.3