From 8ec8d6c50984ca0f8ee160a9adac4b1c8f88d468 Mon Sep 17 00:00:00 2001 From: Aleksa Savic Date: Sun, 28 Apr 2024 12:48:11 +0200 Subject: hwmon: (nzxt-kraken3) Add support for NZXT Kraken 2023 (standard and Elite) models Add support for NZXT Kraken 2023 (standard) and NZXT Kraken 2023 Elite all-in-one CPU coolers. These models communicate identically to the NZXT Kraken Z-series (Z53 code paths) in all cases except when writing the fan curve, where setting additional bits in the report is needed. Reviewed-by: Jonas Malaco Signed-off-by: Aleksa Savic Link: https://lore.kernel.org/r/20240428104812.14037-3-savicaleksa83@gmail.com Signed-off-by: Guenter Roeck --- Documentation/hwmon/nzxt-kraken3.rst | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-) (limited to 'Documentation/hwmon/nzxt-kraken3.rst') diff --git a/Documentation/hwmon/nzxt-kraken3.rst b/Documentation/hwmon/nzxt-kraken3.rst index 90fd9dec15ff..57fe99d23301 100644 --- a/Documentation/hwmon/nzxt-kraken3.rst +++ b/Documentation/hwmon/nzxt-kraken3.rst @@ -11,17 +11,20 @@ Supported devices: * NZXT Kraken Z53 * NZXT Kraken Z63 * NZXT Kraken Z73 +* NZXT Kraken 2023 +* NZXT Kraken 2023 Elite Author: Jonas Malaco, Aleksa Savic Description ----------- -This driver enables hardware monitoring support for NZXT Kraken X53/X63/X73 and -Z53/Z63/Z73 all-in-one CPU liquid coolers. All models expose liquid temperature -and pump speed (in RPM), as well as PWM control (either as a fixed value -or through a temp-PWM curve). The Z-series models additionally expose the speed -and duty of an optionally connected fan, with the same PWM control capabilities. +This driver enables hardware monitoring support for NZXT Kraken X53/X63/X73, +Z53/Z63/Z73 and Kraken 2023 (standard and Elite) all-in-one CPU liquid coolers. +All models expose liquid temperature and pump speed (in RPM), as well as PWM +control (either as a fixed value or through a temp-PWM curve). The Z-series and +Kraken 2023 models additionally expose the speed and duty of an optionally connected +fan, with the same PWM control capabilities. Pump and fan duty control mode can be set through pwm[1-2]_enable, where 1 is for the manual control mode and 2 is for the liquid temp to PWM curve mode. @@ -39,9 +42,9 @@ The devices can report if they are faulty. The driver supports that situation and will issue a warning. This can also happen when the USB cable is connected, but SATA power is not. -The addressable RGB LEDs and LCD screen (only on Z-series models) are not -supported in this driver, but can be controlled through existing userspace tools, -such as `liquidctl`_. +The addressable RGB LEDs and LCD screen (only on Z-series and Kraken 2023 models) +are not supported in this driver, but can be controlled through existing userspace +tools, such as `liquidctl`_. .. _liquidctl: https://github.com/liquidctl/liquidctl -- cgit v1.2.3