From 9a684e19afc630e0763246ee79c0578c1a8eaee8 Mon Sep 17 00:00:00 2001 From: Antonio Ospite Date: Mon, 4 Apr 2011 15:08:46 -0700 Subject: Documentation: consolidate leds files to leds/ subdir leds: move leds-class documentation under the leds/ subdir. Add also a leds/00-INDEX file describing the files under leds/ Signed-off-by: Antonio Ospite Acked-by: Richard Purdie Cc: Andrew Morton Signed-off-by: Randy Dunlap Signed-off-by: Linus Torvalds --- Documentation/leds/00-INDEX | 8 ++++ Documentation/leds/leds-class.txt | 97 ++++++++++++++++++++++++++++++++++++++ Documentation/leds/leds-lp3944.txt | 50 ++++++++++++++++++++ 3 files changed, 155 insertions(+) create mode 100644 Documentation/leds/00-INDEX create mode 100644 Documentation/leds/leds-class.txt create mode 100644 Documentation/leds/leds-lp3944.txt (limited to 'Documentation/leds') diff --git a/Documentation/leds/00-INDEX b/Documentation/leds/00-INDEX new file mode 100644 index 000000000000..29f481df32c7 --- /dev/null +++ b/Documentation/leds/00-INDEX @@ -0,0 +1,8 @@ +leds-class.txt + - documents LED handling under Linux. +leds-lp3944.txt + - notes on how to use the leds-lp3944 driver. +leds-lp5521.txt + - notes on how to use the leds-lp5521 driver. +leds-lp5523.txt + - notes on how to use the leds-lp5523 driver. diff --git a/Documentation/leds/leds-class.txt b/Documentation/leds/leds-class.txt new file mode 100644 index 000000000000..4996586e27e8 --- /dev/null +++ b/Documentation/leds/leds-class.txt @@ -0,0 +1,97 @@ + +LED handling under Linux +======================== + +If you're reading this and thinking about keyboard leds, these are +handled by the input subsystem and the led class is *not* needed. + +In its simplest form, the LED class just allows control of LEDs from +userspace. LEDs appear in /sys/class/leds/. The maximum brightness of the +LED is defined in max_brightness file. The brightness file will set the brightness +of the LED (taking a value 0-max_brightness). Most LEDs don't have hardware +brightness support so will just be turned on for non-zero brightness settings. + +The class also introduces the optional concept of an LED trigger. A trigger +is a kernel based source of led events. Triggers can either be simple or +complex. A simple trigger isn't configurable and is designed to slot into +existing subsystems with minimal additional code. Examples are the ide-disk, +nand-disk and sharpsl-charge triggers. With led triggers disabled, the code +optimises away. + +Complex triggers whilst available to all LEDs have LED specific +parameters and work on a per LED basis. The timer trigger is an example. +The timer trigger will periodically change the LED brightness between +LED_OFF and the current brightness setting. The "on" and "off" time can +be specified via /sys/class/leds//delay_{on,off} in milliseconds. +You can change the brightness value of a LED independently of the timer +trigger. However, if you set the brightness value to LED_OFF it will +also disable the timer trigger. + +You can change triggers in a similar manner to the way an IO scheduler +is chosen (via /sys/class/leds//trigger). Trigger specific +parameters can appear in /sys/class/leds/ once a given trigger is +selected. + + +Design Philosophy +================= + +The underlying design philosophy is simplicity. LEDs are simple devices +and the aim is to keep a small amount of code giving as much functionality +as possible. Please keep this in mind when suggesting enhancements. + + +LED Device Naming +================= + +Is currently of the form: + +"devicename:colour:function" + +There have been calls for LED properties such as colour to be exported as +individual led class attributes. As a solution which doesn't incur as much +overhead, I suggest these become part of the device name. The naming scheme +above leaves scope for further attributes should they be needed. If sections +of the name don't apply, just leave that section blank. + + +Hardware accelerated blink of LEDs +================================== + +Some LEDs can be programmed to blink without any CPU interaction. To +support this feature, a LED driver can optionally implement the +blink_set() function (see ). To set an LED to blinking, +however, it is better to use use the API function led_blink_set(), +as it will check and implement software fallback if necessary. + +To turn off blinking again, use the API function led_brightness_set() +as that will not just set the LED brightness but also stop any software +timers that may have been required for blinking. + +The blink_set() function should choose a user friendly blinking value +if it is called with *delay_on==0 && *delay_off==0 parameters. In this +case the driver should give back the chosen value through delay_on and +delay_off parameters to the leds subsystem. + +Setting the brightness to zero with brightness_set() callback function +should completely turn off the LED and cancel the previously programmed +hardware blinking function, if any. + + +Known Issues +============ + +The LED Trigger core cannot be a module as the simple trigger functions +would cause nightmare dependency issues. I see this as a minor issue +compared to the benefits the simple trigger functionality brings. The +rest of the LED subsystem can be modular. + + +Future Development +================== + +At the moment, a trigger can't be created specifically for a single LED. +There are a number of cases where a trigger might only be mappable to a +particular LED (ACPI?). The addition of triggers provided by the LED driver +should cover this option and be possible to add without breaking the +current interface. diff --git a/Documentation/leds/leds-lp3944.txt b/Documentation/leds/leds-lp3944.txt new file mode 100644 index 000000000000..c6eda18b15ef --- /dev/null +++ b/Documentation/leds/leds-lp3944.txt @@ -0,0 +1,50 @@ +Kernel driver lp3944 +==================== + + * National Semiconductor LP3944 Fun-light Chip + Prefix: 'lp3944' + Addresses scanned: None (see the Notes section below) + Datasheet: Publicly available at the National Semiconductor website + http://www.national.com/pf/LP/LP3944.html + +Authors: + Antonio Ospite + + +Description +----------- +The LP3944 is a helper chip that can drive up to 8 leds, with two programmable +DIM modes; it could even be used as a gpio expander but this driver assumes it +is used as a led controller. + +The DIM modes are used to set _blink_ patterns for leds, the pattern is +specified supplying two parameters: + - period: from 0s to 1.6s + - duty cycle: percentage of the period the led is on, from 0 to 100 + +Setting a led in DIM0 or DIM1 mode makes it blink according to the pattern. +See the datasheet for details. + +LP3944 can be found on Motorola A910 smartphone, where it drives the rgb +leds, the camera flash light and the lcds power. + + +Notes +----- +The chip is used mainly in embedded contexts, so this driver expects it is +registered using the i2c_board_info mechanism. + +To register the chip at address 0x60 on adapter 0, set the platform data +according to include/linux/leds-lp3944.h, set the i2c board info: + + static struct i2c_board_info __initdata a910_i2c_board_info[] = { + { + I2C_BOARD_INFO("lp3944", 0x60), + .platform_data = &a910_lp3944_leds, + }, + }; + +and register it in the platform init function + + i2c_register_board_info(0, a910_i2c_board_info, + ARRAY_SIZE(a910_i2c_board_info)); -- cgit v1.2.3