From 1f70cb4045cba47287fed3ba98dadc7187f13ef8 Mon Sep 17 00:00:00 2001 From: Rafał Miłecki Date: Fri, 26 Aug 2016 16:19:36 +0200 Subject: Documentation: move oneshot trigger attributes documentation to ABI MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Documentation of sysfs interface should be in ABI in the first place. This moves relevant part of documentation and mentions where to look for it. Fix trivial typos whilst we are at it. Signed-off-by: Rafał Miłecki Signed-off-by: Jacek Anaszewski --- Documentation/leds/ledtrig-oneshot.txt | 20 ++------------------ 1 file changed, 2 insertions(+), 18 deletions(-) (limited to 'Documentation/leds') diff --git a/Documentation/leds/ledtrig-oneshot.txt b/Documentation/leds/ledtrig-oneshot.txt index 07cd1fa41a3a..fe57474a12e2 100644 --- a/Documentation/leds/ledtrig-oneshot.txt +++ b/Documentation/leds/ledtrig-oneshot.txt @@ -21,24 +21,8 @@ below: echo oneshot > trigger -This adds the following sysfs attributes to the LED: - - delay_on - specifies for how many milliseconds the LED has to stay at - LED_FULL brightness after it has been armed. - Default to 100 ms. - - delay_off - specifies for how many milliseconds the LED has to stay at - LED_OFF brightness after it has been armed. - Default to 100 ms. - - invert - reverse the blink logic. If set to 0 (default) blink on for delay_on - ms, then blink off for delay_off ms, leaving the LED normally off. If - set to 1, blink off for delay_off ms, then blink on for delay_on ms, - leaving the LED normally on. - Setting this value also immediately change the LED state. - - shot - write any non-empty string to signal an events, this starts a blink - sequence if not already running. +This adds sysfs attributes to the LED that are documented in: +Documentation/ABI/testing/sysfs-class-led-trigger-oneshot Example use-case: network devices, initialization: -- cgit v1.2.3 From be4fdf99fa4dc95aa01144b207caf2cc9fa074d8 Mon Sep 17 00:00:00 2001 From: Vadim Pasternak Date: Thu, 8 Sep 2016 07:25:53 +0000 Subject: leds: add driver for Mellanox systems LEDs This makes it possible to create a set of LEDs for Mellanox systems: "msx6710", "msx6720", "msb7700", "msn2700", "msx1410", "msn2410", "msb7800", "msn2740", "msn2100". Driver obtains LED devices according to system configuration, provided through system DMI data, like mlxcpld:fan1:green, mlxcpld:fan1:red and creates devices in form: "devicename:colour:function". LED setting is controlled through on board CPLD Lattice device. For setting particular LED off, solid, blink: echo 0 > /sys/class/leds/mlxcpld\:status\:green/brightness echo 1 > /sys/class/leds/mlxcpld\:status\:green/brightness echo timer > /sys/class/leds/mlxcpld\:status\:green/trigger On module probing all LEDs are set green, on removing - off. Last setting overwrites previous, f.e. sequence for changing LED from green - red - green: echo 1 > /sys/class/leds/mlxcpld\:psu\:green/brightness echo 1 > /sys/class/leds/mlxcpld\:psu\:red/brightness echo 1 > /sys/class/leds/mlxcpld\:psu\:green/brightness Note: LEDs cannot be turned on/off simultaneously. The Kconfig currently controlling compilation of this code is: drivers/leds/Kconfig:config LEDS_MLXCPLD Signed-off-by: Vadim Pasternak Reviewed-by: Jiri Pirko Reviewed-by: Wei Yongjun Signed-off-by: Jacek Anaszewski --- Documentation/leds/leds-mlxcpld.txt | 110 +++++++++ MAINTAINERS | 7 + drivers/leds/Kconfig | 8 + drivers/leds/Makefile | 1 + drivers/leds/leds-mlxcpld.c | 430 ++++++++++++++++++++++++++++++++++++ 5 files changed, 556 insertions(+) create mode 100644 Documentation/leds/leds-mlxcpld.txt create mode 100644 drivers/leds/leds-mlxcpld.c (limited to 'Documentation/leds') diff --git a/Documentation/leds/leds-mlxcpld.txt b/Documentation/leds/leds-mlxcpld.txt new file mode 100644 index 000000000000..a0e8fd457117 --- /dev/null +++ b/Documentation/leds/leds-mlxcpld.txt @@ -0,0 +1,110 @@ +Kernel driver for Mellanox systems LEDs +======================================= + +Provide system LED support for the nex Mellanox systems: +"msx6710", "msx6720", "msb7700", "msn2700", "msx1410", +"msn2410", "msb7800", "msn2740", "msn2100". + +Description +----------- +Driver provides the following LEDs for the systems "msx6710", "msx6720", +"msb7700", "msn2700", "msx1410", "msn2410", "msb7800", "msn2740": + mlxcpld:fan1:green + mlxcpld:fan1:red + mlxcpld:fan2:green + mlxcpld:fan2:red + mlxcpld:fan3:green + mlxcpld:fan3:red + mlxcpld:fan4:green + mlxcpld:fan4:red + mlxcpld:psu:green + mlxcpld:psu:red + mlxcpld:status:green + mlxcpld:status:red + + "status" + CPLD reg offset: 0x20 + Bits [3:0] + + "psu" + CPLD reg offset: 0x20 + Bits [7:4] + + "fan1" + CPLD reg offset: 0x21 + Bits [3:0] + + "fan2" + CPLD reg offset: 0x21 + Bits [7:4] + + "fan3" + CPLD reg offset: 0x22 + Bits [3:0] + + "fan4" + CPLD reg offset: 0x22 + Bits [7:4] + + Color mask for all the above LEDs: + [bit3,bit2,bit1,bit0] or + [bit7,bit6,bit5,bit4]: + [0,0,0,0] = LED OFF + [0,1,0,1] = Red static ON + [1,1,0,1] = Green static ON + [0,1,1,0] = Red blink 3Hz + [1,1,1,0] = Green blink 3Hz + [0,1,1,1] = Red blink 6Hz + [1,1,1,1] = Green blink 6Hz + +Driver provides the following LEDs for the system "msn2100": + mlxcpld:fan:green + mlxcpld:fan:red + mlxcpld:psu1:green + mlxcpld:psu1:red + mlxcpld:psu2:green + mlxcpld:psu2:red + mlxcpld:status:green + mlxcpld:status:red + mlxcpld:uid:blue + + "status" + CPLD reg offset: 0x20 + Bits [3:0] + + "fan" + CPLD reg offset: 0x21 + Bits [3:0] + + "psu1" + CPLD reg offset: 0x23 + Bits [3:0] + + "psu2" + CPLD reg offset: 0x23 + Bits [7:4] + + "uid" + CPLD reg offset: 0x24 + Bits [3:0] + + Color mask for all the above LEDs, excepted uid: + [bit3,bit2,bit1,bit0] or + [bit7,bit6,bit5,bit4]: + [0,0,0,0] = LED OFF + [0,1,0,1] = Red static ON + [1,1,0,1] = Green static ON + [0,1,1,0] = Red blink 3Hz + [1,1,1,0] = Green blink 3Hz + [0,1,1,1] = Red blink 6Hz + [1,1,1,1] = Green blink 6Hz + + Color mask for uid LED: + [bit3,bit2,bit1,bit0]: + [0,0,0,0] = LED OFF + [1,1,0,1] = Blue static ON + [1,1,1,0] = Blue blink 3Hz + [1,1,1,1] = Blue blink 6Hz + +Driver supports HW blinking at 3Hz and 6Hz frequency (50% duty cycle). +For 3Hz duty cylce is about 167 msec, for 6Hz is about 83 msec. diff --git a/MAINTAINERS b/MAINTAINERS index a306795a7450..f742e88ccf21 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7649,6 +7649,13 @@ W: http://www.mellanox.com Q: http://patchwork.ozlabs.org/project/netdev/list/ F: drivers/net/ethernet/mellanox/mlxsw/ +MELLANOX MLXCPLD LED DRIVER +M: Vadim Pasternak +L: linux-leds@vger.kernel.org +S: Supported +F: drivers/leds/leds-mlxcpld.c +F: Documentation/leds/leds-mlxcpld.txt + SOFT-ROCE DRIVER (rxe) M: Moni Shoua L: linux-rdma@vger.kernel.org diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index 969c720dfd10..7a628c6516f6 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -651,6 +651,14 @@ config LEDS_PM8058 Choose this option if you want to use the LED drivers in the Qualcomm PM8058 PMIC. +config LEDS_MLXCPLD + tristate "LED support for the Mellanox boards" + depends on X86_64 && DMI + depends on LEDS_CLASS + help + This option enabled support for the LEDs on the Mellanox + boards. Say Y to enabled these. + comment "LED Triggers" source "drivers/leds/trigger/Kconfig" diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile index 06a27ef17554..3965070190f5 100644 --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile @@ -70,6 +70,7 @@ obj-$(CONFIG_LEDS_SEAD3) += leds-sead3.o obj-$(CONFIG_LEDS_IS31FL319X) += leds-is31fl319x.o obj-$(CONFIG_LEDS_IS31FL32XX) += leds-is31fl32xx.o obj-$(CONFIG_LEDS_PM8058) += leds-pm8058.o +obj-$(CONFIG_LEDS_MLXCPLD) += leds-mlxcpld.o # LED SPI Drivers obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o diff --git a/drivers/leds/leds-mlxcpld.c b/drivers/leds/leds-mlxcpld.c new file mode 100644 index 000000000000..197ab9b29a9c --- /dev/null +++ b/drivers/leds/leds-mlxcpld.c @@ -0,0 +1,430 @@ +/* + * drivers/leds/leds-mlxcpld.c + * Copyright (c) 2016 Mellanox Technologies. All rights reserved. + * Copyright (c) 2016 Vadim Pasternak + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the names of the copyright holders nor the names of its + * contributors may be used to endorse or promote products derived from + * this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define MLXPLAT_CPLD_LPC_REG_BASE_ADRR 0x2500 /* LPC bus access */ + +/* Color codes for LEDs */ +#define MLXCPLD_LED_OFFSET_HALF 0x01 /* Offset from solid: 3Hz blink */ +#define MLXCPLD_LED_OFFSET_FULL 0x02 /* Offset from solid: 6Hz blink */ +#define MLXCPLD_LED_IS_OFF 0x00 /* Off */ +#define MLXCPLD_LED_RED_STATIC_ON 0x05 /* Solid red */ +#define MLXCPLD_LED_RED_BLINK_HALF (MLXCPLD_LED_RED_STATIC_ON + \ + MLXCPLD_LED_OFFSET_HALF) +#define MLXCPLD_LED_RED_BLINK_FULL (MLXCPLD_LED_RED_STATIC_ON + \ + MLXCPLD_LED_OFFSET_FULL) +#define MLXCPLD_LED_GREEN_STATIC_ON 0x0D /* Solid green */ +#define MLXCPLD_LED_GREEN_BLINK_HALF (MLXCPLD_LED_GREEN_STATIC_ON + \ + MLXCPLD_LED_OFFSET_HALF) +#define MLXCPLD_LED_GREEN_BLINK_FULL (MLXCPLD_LED_GREEN_STATIC_ON + \ + MLXCPLD_LED_OFFSET_FULL) +#define MLXCPLD_LED_BLINK_3HZ 167 /* ~167 msec off/on */ +#define MLXCPLD_LED_BLINK_6HZ 83 /* ~83 msec off/on */ + +/** + * mlxcpld_param - LED access parameters: + * @offset - offset for LED access in CPLD device + * @mask - mask for LED access in CPLD device + * @base_color - base color code for LED +**/ +struct mlxcpld_param { + u8 offset; + u8 mask; + u8 base_color; +}; + +/** + * mlxcpld_led_priv - LED private data: + * @cled - LED class device instance + * @param - LED CPLD access parameters +**/ +struct mlxcpld_led_priv { + struct led_classdev cdev; + struct mlxcpld_param param; +}; + +#define cdev_to_priv(c) container_of(c, struct mlxcpld_led_priv, cdev) + +/** + * mlxcpld_led_profile - system LED profile (defined per system class): + * @offset - offset for LED access in CPLD device + * @mask - mask for LED access in CPLD device + * @base_color - base color code + * @brightness - default brightness setting (on/off) + * @name - LED name +**/ +struct mlxcpld_led_profile { + u8 offset; + u8 mask; + u8 base_color; + enum led_brightness brightness; + const char *name; +}; + +/** + * mlxcpld_led_pdata - system LED private data + * @pdev - platform device pointer + * @pled - LED class device instance + * @profile - system configuration profile + * @num_led_instances - number of LED instances + * @lock - device access lock +**/ +struct mlxcpld_led_pdata { + struct platform_device *pdev; + struct mlxcpld_led_priv *pled; + struct mlxcpld_led_profile *profile; + int num_led_instances; + spinlock_t lock; +}; + +static struct mlxcpld_led_pdata *mlxcpld_led; + +/* Default profile fit the next Mellanox systems: + * "msx6710", "msx6720", "msb7700", "msn2700", "msx1410", + * "msn2410", "msb7800", "msn2740" + */ +static struct mlxcpld_led_profile mlxcpld_led_default_profile[] = { + { + 0x21, 0xf0, MLXCPLD_LED_GREEN_STATIC_ON, 1, + "mlxcpld:fan1:green", + }, + { + 0x21, 0xf0, MLXCPLD_LED_RED_STATIC_ON, LED_OFF, + "mlxcpld:fan1:red", + }, + { + 0x21, 0x0f, MLXCPLD_LED_GREEN_STATIC_ON, 1, + "mlxcpld:fan2:green", + }, + { + 0x21, 0x0f, MLXCPLD_LED_RED_STATIC_ON, LED_OFF, + "mlxcpld:fan2:red", + }, + { + 0x22, 0xf0, MLXCPLD_LED_GREEN_STATIC_ON, 1, + "mlxcpld:fan3:green", + }, + { + 0x22, 0xf0, MLXCPLD_LED_RED_STATIC_ON, LED_OFF, + "mlxcpld:fan3:red", + }, + { + 0x22, 0x0f, MLXCPLD_LED_GREEN_STATIC_ON, 1, + "mlxcpld:fan4:green", + }, + { + 0x22, 0x0f, MLXCPLD_LED_RED_STATIC_ON, LED_OFF, + "mlxcpld:fan4:red", + }, + { + 0x20, 0x0f, MLXCPLD_LED_GREEN_STATIC_ON, 1, + "mlxcpld:psu:green", + }, + { + 0x20, 0x0f, MLXCPLD_LED_RED_STATIC_ON, LED_OFF, + "mlxcpld:psu:red", + }, + { + 0x20, 0xf0, MLXCPLD_LED_GREEN_STATIC_ON, 1, + "mlxcpld:status:green", + }, + { + 0x20, 0xf0, MLXCPLD_LED_RED_STATIC_ON, LED_OFF, + "mlxcpld:status:red", + }, +}; + +/* Profile fit the Mellanox systems based on "msn2100" */ +static struct mlxcpld_led_profile mlxcpld_led_msn2100_profile[] = { + { + 0x21, 0xf0, MLXCPLD_LED_GREEN_STATIC_ON, 1, + "mlxcpld:fan:green", + }, + { + 0x21, 0xf0, MLXCPLD_LED_RED_STATIC_ON, LED_OFF, + "mlxcpld:fan:red", + }, + { + 0x23, 0xf0, MLXCPLD_LED_GREEN_STATIC_ON, 1, + "mlxcpld:psu1:green", + }, + { + 0x23, 0xf0, MLXCPLD_LED_RED_STATIC_ON, LED_OFF, + "mlxcpld:psu1:red", + }, + { + 0x23, 0x0f, MLXCPLD_LED_GREEN_STATIC_ON, 1, + "mlxcpld:psu2:green", + }, + { + 0x23, 0x0f, MLXCPLD_LED_RED_STATIC_ON, LED_OFF, + "mlxcpld:psu2:red", + }, + { + 0x20, 0xf0, MLXCPLD_LED_GREEN_STATIC_ON, 1, + "mlxcpld:status:green", + }, + { + 0x20, 0xf0, MLXCPLD_LED_RED_STATIC_ON, LED_OFF, + "mlxcpld:status:red", + }, + { + 0x24, 0xf0, MLXCPLD_LED_GREEN_STATIC_ON, LED_OFF, + "mlxcpld:uid:blue", + }, +}; + +enum mlxcpld_led_platform_types { + MLXCPLD_LED_PLATFORM_DEFAULT, + MLXCPLD_LED_PLATFORM_MSN2100, +}; + +static const char *mlx_product_names[] = { + "DEFAULT", + "MSN2100", +}; + +static enum +mlxcpld_led_platform_types mlxcpld_led_platform_check_sys_type(void) +{ + const char *mlx_product_name; + int i; + + mlx_product_name = dmi_get_system_info(DMI_PRODUCT_NAME); + if (!mlx_product_name) + return MLXCPLD_LED_PLATFORM_DEFAULT; + + for (i = 1; i < ARRAY_SIZE(mlx_product_names); i++) { + if (strstr(mlx_product_name, mlx_product_names[i])) + return i; + } + + return MLXCPLD_LED_PLATFORM_DEFAULT; +} + +static void mlxcpld_led_bus_access_func(u16 base, u8 offset, u8 rw_flag, + u8 *data) +{ + u32 addr = base + offset; + + if (rw_flag == 0) + outb(*data, addr); + else + *data = inb(addr); +} + +static void mlxcpld_led_store_hw(u8 mask, u8 off, u8 vset) +{ + u8 nib, val; + + /* + * Each LED is controlled through low or high nibble of the relevant + * CPLD register. Register offset is specified by off parameter. + * Parameter vset provides color code: 0x0 for off, 0x5 for solid red, + * 0x6 for 3Hz blink red, 0xd for solid green, 0xe for 3Hz blink + * green. + * Parameter mask specifies which nibble is used for specific LED: mask + * 0xf0 - lower nibble is to be used (bits from 0 to 3), mask 0x0f - + * higher nibble (bits from 4 to 7). + */ + spin_lock(&mlxcpld_led->lock); + mlxcpld_led_bus_access_func(MLXPLAT_CPLD_LPC_REG_BASE_ADRR, off, 1, + &val); + nib = (mask == 0xf0) ? vset : (vset << 4); + val = (val & mask) | nib; + mlxcpld_led_bus_access_func(MLXPLAT_CPLD_LPC_REG_BASE_ADRR, off, 0, + &val); + spin_unlock(&mlxcpld_led->lock); +} + +static void mlxcpld_led_brightness_set(struct led_classdev *led, + enum led_brightness value) +{ + struct mlxcpld_led_priv *pled = cdev_to_priv(led); + + if (value) { + mlxcpld_led_store_hw(pled->param.mask, pled->param.offset, + pled->param.base_color); + return; + } + + mlxcpld_led_store_hw(pled->param.mask, pled->param.offset, + MLXCPLD_LED_IS_OFF); +} + +static int mlxcpld_led_blink_set(struct led_classdev *led, + unsigned long *delay_on, + unsigned long *delay_off) +{ + struct mlxcpld_led_priv *pled = cdev_to_priv(led); + + /* + * HW supports two types of blinking: full (6Hz) and half (3Hz). + * For delay on/off zero default setting 3Hz is used. + */ + if (!(*delay_on == 0 && *delay_off == 0) && + !(*delay_on == MLXCPLD_LED_BLINK_3HZ && + *delay_off == MLXCPLD_LED_BLINK_3HZ) && + !(*delay_on == MLXCPLD_LED_BLINK_6HZ && + *delay_off == MLXCPLD_LED_BLINK_6HZ)) + return -EINVAL; + + if (*delay_on == MLXCPLD_LED_BLINK_6HZ) + mlxcpld_led_store_hw(pled->param.mask, pled->param.offset, + pled->param.base_color + + MLXCPLD_LED_OFFSET_FULL); + else + mlxcpld_led_store_hw(pled->param.mask, pled->param.offset, + pled->param.base_color + + MLXCPLD_LED_OFFSET_HALF); + + return 0; +} + +static int mlxcpld_led_config(struct device *dev, + struct mlxcpld_led_pdata *cpld) +{ + int i; + int err; + + cpld->pled = devm_kzalloc(dev, sizeof(struct mlxcpld_led_priv) * + cpld->num_led_instances, GFP_KERNEL); + if (!cpld->pled) + return -ENOMEM; + + for (i = 0; i < cpld->num_led_instances; i++) { + cpld->pled[i].cdev.name = cpld->profile[i].name; + cpld->pled[i].cdev.brightness = cpld->profile[i].brightness; + cpld->pled[i].cdev.max_brightness = 1; + cpld->pled[i].cdev.brightness_set = mlxcpld_led_brightness_set; + cpld->pled[i].cdev.blink_set = mlxcpld_led_blink_set; + cpld->pled[i].cdev.flags = LED_CORE_SUSPENDRESUME; + err = devm_led_classdev_register(dev, &cpld->pled[i].cdev); + if (err) + return err; + + cpld->pled[i].param.offset = mlxcpld_led->profile[i].offset; + cpld->pled[i].param.mask = mlxcpld_led->profile[i].mask; + cpld->pled[i].param.base_color = + mlxcpld_led->profile[i].base_color; + + if (mlxcpld_led->profile[i].brightness) + mlxcpld_led_brightness_set(&cpld->pled[i].cdev, + mlxcpld_led->profile[i].brightness); + } + + return 0; +} + +static int __init mlxcpld_led_probe(struct platform_device *pdev) +{ + enum mlxcpld_led_platform_types mlxcpld_led_plat = + mlxcpld_led_platform_check_sys_type(); + + mlxcpld_led = devm_kzalloc(&pdev->dev, sizeof(*mlxcpld_led), + GFP_KERNEL); + if (!mlxcpld_led) + return -ENOMEM; + + mlxcpld_led->pdev = pdev; + + switch (mlxcpld_led_plat) { + case MLXCPLD_LED_PLATFORM_MSN2100: + mlxcpld_led->profile = mlxcpld_led_msn2100_profile; + mlxcpld_led->num_led_instances = + ARRAY_SIZE(mlxcpld_led_msn2100_profile); + break; + + default: + mlxcpld_led->profile = mlxcpld_led_default_profile; + mlxcpld_led->num_led_instances = + ARRAY_SIZE(mlxcpld_led_default_profile); + break; + } + + spin_lock_init(&mlxcpld_led->lock); + + return mlxcpld_led_config(&pdev->dev, mlxcpld_led); +} + +static struct platform_driver mlxcpld_led_driver = { + .driver = { + .name = KBUILD_MODNAME, + }, +}; + +static int __init mlxcpld_led_init(void) +{ + struct platform_device *pdev; + int err; + + pdev = platform_device_register_simple(KBUILD_MODNAME, -1, NULL, 0); + if (IS_ERR(pdev)) { + pr_err("Device allocation failed\n"); + return PTR_ERR(pdev); + } + + err = platform_driver_probe(&mlxcpld_led_driver, mlxcpld_led_probe); + if (err) { + pr_err("Probe platform driver failed\n"); + platform_device_unregister(pdev); + } + + return err; +} + +static void __exit mlxcpld_led_exit(void) +{ + platform_device_unregister(mlxcpld_led->pdev); + platform_driver_unregister(&mlxcpld_led_driver); +} + +module_init(mlxcpld_led_init); +module_exit(mlxcpld_led_exit); + +MODULE_AUTHOR("Vadim Pasternak "); +MODULE_DESCRIPTION("Mellanox board LED driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:leds_mlxcpld"); -- cgit v1.2.3