From 790a6c21c111ba7dcddf762f791fb3178711b82f Mon Sep 17 00:00:00 2001 From: Jonathan Corbet Date: Thu, 30 Mar 2023 13:48:12 -0600 Subject: docs: move m68k architecture documentation under Documentation/arch/ Architecture-specific documentation is being moved into Documentation/arch/ as a way of cleaning up the top-level documentation directory and making the docs hierarchy more closely match the source hierarchy. Move Documentation/m68k into arch/ and fix all in-tree references. Reviewed-by: Geert Uytterhoeven Signed-off-by: Jonathan Corbet --- Documentation/m68k/kernel-options.rst | 911 ---------------------------------- 1 file changed, 911 deletions(-) delete mode 100644 Documentation/m68k/kernel-options.rst (limited to 'Documentation/m68k/kernel-options.rst') diff --git a/Documentation/m68k/kernel-options.rst b/Documentation/m68k/kernel-options.rst deleted file mode 100644 index 2008a20b4329..000000000000 --- a/Documentation/m68k/kernel-options.rst +++ /dev/null @@ -1,911 +0,0 @@ -=================================== -Command Line Options for Linux/m68k -=================================== - -Last Update: 2 May 1999 - -Linux/m68k version: 2.2.6 - -Author: Roman.Hodek@informatik.uni-erlangen.de (Roman Hodek) - -Update: jds@kom.auc.dk (Jes Sorensen) and faq@linux-m68k.org (Chris Lawrence) - -0) Introduction -=============== - -Often I've been asked which command line options the Linux/m68k -kernel understands, or how the exact syntax for the ... option is, or -... about the option ... . I hope, this document supplies all the -answers... - -Note that some options might be outdated, their descriptions being -incomplete or missing. Please update the information and send in the -patches. - - -1) Overview of the Kernel's Option Processing -============================================= - -The kernel knows three kinds of options on its command line: - - 1) kernel options - 2) environment settings - 3) arguments for init - -To which of these classes an argument belongs is determined as -follows: If the option is known to the kernel itself, i.e. if the name -(the part before the '=') or, in some cases, the whole argument string -is known to the kernel, it belongs to class 1. Otherwise, if the -argument contains an '=', it is of class 2, and the definition is put -into init's environment. All other arguments are passed to init as -command line options. - -This document describes the valid kernel options for Linux/m68k in -the version mentioned at the start of this file. Later revisions may -add new such options, and some may be missing in older versions. - -In general, the value (the part after the '=') of an option is a -list of values separated by commas. The interpretation of these values -is up to the driver that "owns" the option. This association of -options with drivers is also the reason that some are further -subdivided. - - -2) General Kernel Options -========================= - -2.1) root= ----------- - -:Syntax: root=/dev/ -:or: root= - -This tells the kernel which device it should mount as the root -filesystem. The device must be a block device with a valid filesystem -on it. - -The first syntax gives the device by name. These names are converted -into a major/minor number internally in the kernel in an unusual way. -Normally, this "conversion" is done by the device files in /dev, but -this isn't possible here, because the root filesystem (with /dev) -isn't mounted yet... So the kernel parses the name itself, with some -hardcoded name to number mappings. The name must always be a -combination of two or three letters, followed by a decimal number. -Valid names are:: - - /dev/ram: -> 0x0100 (initial ramdisk) - /dev/hda: -> 0x0300 (first IDE disk) - /dev/hdb: -> 0x0340 (second IDE disk) - /dev/sda: -> 0x0800 (first SCSI disk) - /dev/sdb: -> 0x0810 (second SCSI disk) - /dev/sdc: -> 0x0820 (third SCSI disk) - /dev/sdd: -> 0x0830 (forth SCSI disk) - /dev/sde: -> 0x0840 (fifth SCSI disk) - /dev/fd : -> 0x0200 (floppy disk) - -The name must be followed by a decimal number, that stands for the -partition number. Internally, the value of the number is just -added to the device number mentioned in the table above. The -exceptions are /dev/ram and /dev/fd, where /dev/ram refers to an -initial ramdisk loaded by your bootstrap program (please consult the -instructions for your bootstrap program to find out how to load an -initial ramdisk). As of kernel version 2.0.18 you must specify -/dev/ram as the root device if you want to boot from an initial -ramdisk. For the floppy devices, /dev/fd, the number stands for the -floppy drive number (there are no partitions on floppy disks). I.e., -/dev/fd0 stands for the first drive, /dev/fd1 for the second, and so -on. Since the number is just added, you can also force the disk format -by adding a number greater than 3. If you look into your /dev -directory, use can see the /dev/fd0D720 has major 2 and minor 16. You -can specify this device for the root FS by writing "root=/dev/fd16" on -the kernel command line. - -[Strange and maybe uninteresting stuff ON] - -This unusual translation of device names has some strange -consequences: If, for example, you have a symbolic link from /dev/fd -to /dev/fd0D720 as an abbreviation for floppy driver #0 in DD format, -you cannot use this name for specifying the root device, because the -kernel cannot see this symlink before mounting the root FS and it -isn't in the table above. If you use it, the root device will not be -set at all, without an error message. Another example: You cannot use a -partition on e.g. the sixth SCSI disk as the root filesystem, if you -want to specify it by name. This is, because only the devices up to -/dev/sde are in the table above, but not /dev/sdf. Although, you can -use the sixth SCSI disk for the root FS, but you have to specify the -device by number... (see below). Or, even more strange, you can use the -fact that there is no range checking of the partition number, and your -knowledge that each disk uses 16 minors, and write "root=/dev/sde17" -(for /dev/sdf1). - -[Strange and maybe uninteresting stuff OFF] - -If the device containing your root partition isn't in the table -above, you can also specify it by major and minor numbers. These are -written in hex, with no prefix and no separator between. E.g., if you -have a CD with contents appropriate as a root filesystem in the first -SCSI CD-ROM drive, you boot from it by "root=0b00". Here, hex "0b" = -decimal 11 is the major of SCSI CD-ROMs, and the minor 0 stands for -the first of these. You can find out all valid major numbers by -looking into include/linux/major.h. - -In addition to major and minor numbers, if the device containing your -root partition uses a partition table format with unique partition -identifiers, then you may use them. For instance, -"root=PARTUUID=00112233-4455-6677-8899-AABBCCDDEEFF". It is also -possible to reference another partition on the same device using a -known partition UUID as the starting point. For example, -if partition 5 of the device has the UUID of -00112233-4455-6677-8899-AABBCCDDEEFF then partition 3 may be found as -follows: - - PARTUUID=00112233-4455-6677-8899-AABBCCDDEEFF/PARTNROFF=-2 - -Authoritative information can be found in -"Documentation/admin-guide/kernel-parameters.rst". - - -2.2) ro, rw ------------ - -:Syntax: ro -:or: rw - -These two options tell the kernel whether it should mount the root -filesystem read-only or read-write. The default is read-only, except -for ramdisks, which default to read-write. - - -2.3) debug ----------- - -:Syntax: debug - -This raises the kernel log level to 10 (the default is 7). This is the -same level as set by the "dmesg" command, just that the maximum level -selectable by dmesg is 8. - - -2.4) debug= ------------ - -:Syntax: debug= - -This option causes certain kernel messages be printed to the selected -debugging device. This can aid debugging the kernel, since the -messages can be captured and analyzed on some other machine. Which -devices are possible depends on the machine type. There are no checks -for the validity of the device name. If the device isn't implemented, -nothing happens. - -Messages logged this way are in general stack dumps after kernel -memory faults or bad kernel traps, and kernel panics. To be exact: all -messages of level 0 (panic messages) and all messages printed while -the log level is 8 or more (their level doesn't matter). Before stack -dumps, the kernel sets the log level to 10 automatically. A level of -at least 8 can also be set by the "debug" command line option (see -2.3) and at run time with "dmesg -n 8". - -Devices possible for Amiga: - - - "ser": - built-in serial port; parameters: 9600bps, 8N1 - - "mem": - Save the messages to a reserved area in chip mem. After - rebooting, they can be read under AmigaOS with the tool - 'dmesg'. - -Devices possible for Atari: - - - "ser1": - ST-MFP serial port ("Modem1"); parameters: 9600bps, 8N1 - - "ser2": - SCC channel B serial port ("Modem2"); parameters: 9600bps, 8N1 - - "ser" : - default serial port - This is "ser2" for a Falcon, and "ser1" for any other machine - - "midi": - The MIDI port; parameters: 31250bps, 8N1 - - "par" : - parallel port - - The printing routine for this implements a timeout for the - case there's no printer connected (else the kernel would - lock up). The timeout is not exact, but usually a few - seconds. - - -2.6) ramdisk_size= ------------------- - -:Syntax: ramdisk_size= - -This option instructs the kernel to set up a ramdisk of the given -size in KBytes. Do not use this option if the ramdisk contents are -passed by bootstrap! In this case, the size is selected automatically -and should not be overwritten. - -The only application is for root filesystems on floppy disks, that -should be loaded into memory. To do that, select the corresponding -size of the disk as ramdisk size, and set the root device to the disk -drive (with "root="). - - -2.7) swap= - - I can't find any sign of this option in 2.2.6. - -2.8) buff= ------------ - - I can't find any sign of this option in 2.2.6. - - -3) General Device Options (Amiga and Atari) -=========================================== - -3.1) ether= ------------ - -:Syntax: ether=[[,[,[,]]]], - - is the name of a net driver, as specified in -drivers/net/Space.c in the Linux source. Most prominent are eth0, ... -eth3, sl0, ... sl3, ppp0, ..., ppp3, dummy, and lo. - -The non-ethernet drivers (sl, ppp, dummy, lo) obviously ignore the -settings by this options. Also, the existing ethernet drivers for -Linux/m68k (ariadne, a2065, hydra) don't use them because Zorro boards -are really Plug-'n-Play, so the "ether=" option is useless altogether -for Linux/m68k. - - -3.2) hd= --------- - -:Syntax: hd=,, - -This option sets the disk geometry of an IDE disk. The first hd= -option is for the first IDE disk, the second for the second one. -(I.e., you can give this option twice.) In most cases, you won't have -to use this option, since the kernel can obtain the geometry data -itself. It exists just for the case that this fails for one of your -disks. - - -3.3) max_scsi_luns= -------------------- - -:Syntax: max_scsi_luns= - -Sets the maximum number of LUNs (logical units) of SCSI devices to -be scanned. Valid values for are between 1 and 8. Default is 8 if -"Probe all LUNs on each SCSI device" was selected during the kernel -configuration, else 1. - - -3.4) st= --------- - -:Syntax: st=,[,[]] - -Sets several parameters of the SCSI tape driver. is -the number of 512-byte buffers reserved for tape operations for each -device. sets the number of blocks which must be filled -to start an actual write operation to the tape. Maximum value is the -total number of buffers. limits the total number of -buffers allocated for all tape devices. - - -3.5) dmasound= --------------- - -:Syntax: dmasound=[,[,]] - -This option controls some configurations of the Linux/m68k DMA sound -driver (Amiga and Atari): is the number of buffers you want -to use (minimum 4, default 4), is the size of each -buffer in kilobytes (minimum 4, default 32) and says -how much percent of error will be tolerated when setting a frequency -(maximum 10, default 0). For example with 3% you can play 8000Hz -AU-Files on the Falcon with its hardware frequency of 8195Hz and thus -don't need to expand the sound. - - - -4) Options for Atari Only -========================= - -4.1) video= ------------ - -:Syntax: video=: - -The parameter specifies the name of the frame buffer, -eg. most atari users will want to specify `atafb` here. The - is a comma-separated list of the sub-options listed -below. - -NB: - Please notice that this option was renamed from `atavideo` to - `video` during the development of the 1.3.x kernels, thus you - might need to update your boot-scripts if upgrading to 2.x from - an 1.2.x kernel. - -NBB: - The behavior of video= was changed in 2.1.57 so the recommended - option is to specify the name of the frame buffer. - -4.1.1) Video Mode ------------------ - -This sub-option may be any of the predefined video modes, as listed -in atari/atafb.c in the Linux/m68k source tree. The kernel will -activate the given video mode at boot time and make it the default -mode, if the hardware allows. Currently defined names are: - - - stlow : 320x200x4 - - stmid, default5 : 640x200x2 - - sthigh, default4: 640x400x1 - - ttlow : 320x480x8, TT only - - ttmid, default1 : 640x480x4, TT only - - tthigh, default2: 1280x960x1, TT only - - vga2 : 640x480x1, Falcon only - - vga4 : 640x480x2, Falcon only - - vga16, default3 : 640x480x4, Falcon only - - vga256 : 640x480x8, Falcon only - - falh2 : 896x608x1, Falcon only - - falh16 : 896x608x4, Falcon only - -If no video mode is given on the command line, the kernel tries the -modes names "default" in turn, until one is possible with the -hardware in use. - -A video mode setting doesn't make sense, if the external driver is -activated by a "external:" sub-option. - -4.1.2) inverse --------------- - -Invert the display. This affects only text consoles. -Usually, the background is chosen to be black. With this -option, you can make the background white. - -4.1.3) font ------------ - -:Syntax: font: - -Specify the font to use in text modes. Currently you can choose only -between `VGA8x8`, `VGA8x16` and `PEARL8x8`. `VGA8x8` is default, if the -vertical size of the display is less than 400 pixel rows. Otherwise, the -`VGA8x16` font is the default. - -4.1.4) `hwscroll_` ------------------- - -:Syntax: `hwscroll_` - -The number of additional lines of video memory to reserve for -speeding up the scrolling ("hardware scrolling"). Hardware scrolling -is possible only if the kernel can set the video base address in steps -fine enough. This is true for STE, MegaSTE, TT, and Falcon. It is not -possible with plain STs and graphics cards (The former because the -base address must be on a 256 byte boundary there, the latter because -the kernel doesn't know how to set the base address at all.) - -By default, is set to the number of visible text lines on the -display. Thus, the amount of video memory is doubled, compared to no -hardware scrolling. You can turn off the hardware scrolling altogether -by setting to 0. - -4.1.5) internal: ----------------- - -:Syntax: internal:;[;;;] - -This option specifies the capabilities of some extended internal video -hardware, like e.g. OverScan. and give the (extended) -dimensions of the screen. - -If your OverScan needs a black border, you have to write the last -three arguments of the "internal:". is the maximum line -length the hardware allows, the maximum number of lines. - is the offset of the visible part of the screen memory to its -physical start, in bytes. - -Often, extended interval video hardware has to be activated somehow. -For this, see the "sw_*" options below. - -4.1.6) external: ----------------- - -:Syntax: - external:;;;;[;[; - [;[;[;]]]]] - -.. I had to break this line... - -This is probably the most complicated parameter... It specifies that -you have some external video hardware (a graphics board), and how to -use it under Linux/m68k. The kernel cannot know more about the hardware -than you tell it here! The kernel also is unable to set or change any -video modes, since it doesn't know about any board internal. So, you -have to switch to that video mode before you start Linux, and cannot -switch to another mode once Linux has started. - -The first 3 parameters of this sub-option should be obvious: , - and give the dimensions of the screen and the number of -planes (depth). The depth is the logarithm to base 2 of the number -of colors possible. (Or, the other way round: The number of colors is -2^depth). - -You have to tell the kernel furthermore how the video memory is -organized. This is done by a letter as parameter: - - 'n': - "normal planes", i.e. one whole plane after another - 'i': - "interleaved planes", i.e. 16 bit of the first plane, than 16 bit - of the next, and so on... This mode is used only with the - built-in Atari video modes, I think there is no card that - supports this mode. - 'p': - "packed pixels", i.e. consecutive bits stand for all - planes of one pixel; this is the most common mode for 8 planes - (256 colors) on graphic cards - 't': - "true color" (more or less packed pixels, but without a color - lookup table); usually depth is 24 - -For monochrome modes (i.e., is 1), the letter has a -different meaning: - - 'n': - normal colors, i.e. 0=white, 1=black - 'i': - inverted colors, i.e. 0=black, 1=white - -The next important information about the video hardware is the base -address of the video memory. That is given in the parameter, -as a hexadecimal number with a "0x" prefix. You have to find out this -address in the documentation of your hardware. - -The next parameter, , tells the kernel about the size of the -video memory. If it's missing, the size is calculated from , -, and . For now, it is not useful to write a value here. -It would be used only for hardware scrolling (which isn't possible -with the external driver, because the kernel cannot set the video base -address), or for virtual resolutions under X (which the X server -doesn't support yet). So, it's currently best to leave this field -empty, either by ending the "external:" after the video address or by -writing two consecutive semicolons, if you want to give a -(it is allowed to leave this parameter empty). - -The parameter is optional. If it is not given, the kernel -cannot read or write any color registers of the video hardware, and -thus you have to set appropriate colors before you start Linux. But if -your card is somehow VGA compatible, you can tell the kernel the base -address of the VGA register set, so it can change the color lookup -table. You have to look up this address in your board's documentation. -To avoid misunderstandings: is the _base_ address, i.e. a 4k -aligned address. For read/writing the color registers, the kernel -uses the addresses vgabase+0x3c7...vgabase+0x3c9. The -parameter is written in hexadecimal with a "0x" prefix, just as -. - - is meaningful only if is specified. It tells the -kernel how wide each of the color register is, i.e. the number of bits -per single color (red/green/blue). Default is 6, another quite usual -value is 8. - -Also is used together with . It tells the kernel -about the color register model of your gfx board. Currently, the types -"vga" (which is also the default) and "mv300" (SANG MV300) are -implemented. - -Parameter is required for ProMST or ET4000 cards where -the physical linelength differs from the visible length. With ProMST, -xres_virtual must be set to 2048. For ET4000, xres_virtual depends on the -initialisation of the video-card. -If you're missing a corresponding yres_virtual: the external part is legacy, -therefore we don't support hardware-dependent functions like hardware-scroll, -panning or blanking. - -4.1.7) eclock: --------------- - -The external pixel clock attached to the Falcon VIDEL shifter. This -currently works only with the ScreenWonder! - -4.1.8) monitorcap: -------------------- - -:Syntax: monitorcap:;;; - -This describes the capabilities of a multisync monitor. Don't use it -with a fixed-frequency monitor! For now, only the Falcon frame buffer -uses the settings of "monitorcap:". - - and are the minimum and maximum, resp., vertical frequencies -your monitor can work with, in Hz. and are the same for -the horizontal frequency, in kHz. - - The defaults are 58;62;31;32 (VGA compatible). - - The defaults for TV/SC1224/SC1435 cover both PAL and NTSC standards. - -4.1.9) keep ------------- - -If this option is given, the framebuffer device doesn't do any video -mode calculations and settings on its own. The only Atari fb device -that does this currently is the Falcon. - -What you reach with this: Settings for unknown video extensions -aren't overridden by the driver, so you can still use the mode found -when booting, when the driver doesn't know to set this mode itself. -But this also means, that you can't switch video modes anymore... - -An example where you may want to use "keep" is the ScreenBlaster for -the Falcon. - - -4.2) atamouse= --------------- - -:Syntax: atamouse=,[] - -With this option, you can set the mouse movement reporting threshold. -This is the number of pixels of mouse movement that have to accumulate -before the IKBD sends a new mouse packet to the kernel. Higher values -reduce the mouse interrupt load and thus reduce the chance of keyboard -overruns. Lower values give a slightly faster mouse responses and -slightly better mouse tracking. - -You can set the threshold in x and y separately, but usually this is -of little practical use. If there's just one number in the option, it -is used for both dimensions. The default value is 2 for both -thresholds. - - -4.3) ataflop= -------------- - -:Syntax: ataflop=[,[,[,]]] - - The drive type may be 0, 1, or 2, for DD, HD, and ED, resp. This - setting affects how many buffers are reserved and which formats are - probed (see also below). The default is 1 (HD). Only one drive type - can be selected. If you have two disk drives, select the "better" - type. - - The second parameter tells the kernel whether to use - track buffering (1) or not (0). The default is machine-dependent: - no for the Medusa and yes for all others. - - With the two following parameters, you can change the default - steprate used for drive A and B, resp. - - -4.4) atascsi= -------------- - -:Syntax: atascsi=[,[,[,[,]]]] - -This option sets some parameters for the Atari native SCSI driver. -Generally, any number of arguments can be omitted from the end. And -for each of the numbers, a negative value means "use default". The -defaults depend on whether TT-style or Falcon-style SCSI is used. -Below, defaults are noted as n/m, where the first value refers to -TT-SCSI and the latter to Falcon-SCSI. If an illegal value is given -for one parameter, an error message is printed and that one setting is -ignored (others aren't affected). - - : - This is the maximum number of SCSI commands queued internally to the - Atari SCSI driver. A value of 1 effectively turns off the driver - internal multitasking (if it causes problems). Legal values are >= - 1. can be as high as you like, but values greater than - times the number of SCSI targets (LUNs) you have - don't make sense. Default: 16/8. - - : - Maximum number of SCSI commands issued to the driver for one - logical unit (LUN, usually one SCSI target). Legal values start - from 1. If tagged queuing (see below) is not used, values greater - than 2 don't make sense, but waste memory. Otherwise, the maximum - is the number of command tags available to the driver (currently - 32). Default: 8/1. (Note: Values > 1 seem to cause problems on a - Falcon, cause not yet known.) - - The value at a great part determines the amount of - memory SCSI reserves for itself. The formula is rather - complicated, but I can give you some hints: - - no scatter-gather: - cmd_per_lun * 232 bytes - full scatter-gather: - cmd_per_lun * approx. 17 Kbytes - - : - Size of the scatter-gather table, i.e. the number of requests - consecutive on the disk that can be merged into one SCSI command. - Legal values are between 0 and 255. Default: 255/0. Note: This - value is forced to 0 on a Falcon, since scatter-gather isn't - possible with the ST-DMA. Not using scatter-gather hurts - performance significantly. - - : - The SCSI ID to be used by the initiator (your Atari). This is - usually 7, the highest possible ID. Every ID on the SCSI bus must - be unique. Default: determined at run time: If the NV-RAM checksum - is valid, and bit 7 in byte 30 of the NV-RAM is set, the lower 3 - bits of this byte are used as the host ID. (This method is defined - by Atari and also used by some TOS HD drivers.) If the above - isn't given, the default ID is 7. (both, TT and Falcon). - - : - 0 means turn off tagged queuing support, all other values > 0 mean - use tagged queuing for targets that support it. Default: currently - off, but this may change when tagged queuing handling has been - proved to be reliable. - - Tagged queuing means that more than one command can be issued to - one LUN, and the SCSI device itself orders the requests so they - can be performed in optimal order. Not all SCSI devices support - tagged queuing (:-(). - -4.5 switches= -------------- - -:Syntax: switches= - -With this option you can switch some hardware lines that are often -used to enable/disable certain hardware extensions. Examples are -OverScan, overclocking, ... - -The is a comma-separated list of the following -items: - - ikbd: - set RTS of the keyboard ACIA high - midi: - set RTS of the MIDI ACIA high - snd6: - set bit 6 of the PSG port A - snd7: - set bit 6 of the PSG port A - -It doesn't make sense to mention a switch more than once (no -difference to only once), but you can give as many switches as you -want to enable different features. The switch lines are set as early -as possible during kernel initialization (even before determining the -present hardware.) - -All of the items can also be prefixed with `ov_`, i.e. `ov_ikbd`, -`ov_midi`, ... These options are meant for switching on an OverScan -video extension. The difference to the bare option is that the -switch-on is done after video initialization, and somehow synchronized -to the HBLANK. A speciality is that ov_ikbd and ov_midi are switched -off before rebooting, so that OverScan is disabled and TOS boots -correctly. - -If you give an option both, with and without the `ov_` prefix, the -earlier initialization (`ov_`-less) takes precedence. But the -switching-off on reset still happens in this case. - -5) Options for Amiga Only: -========================== - -5.1) video= ------------ - -:Syntax: video=: - -The parameter specifies the name of the frame buffer, valid -options are `amifb`, `cyber`, 'virge', `retz3` and `clgen`, provided -that the respective frame buffer devices have been compiled into the -kernel (or compiled as loadable modules). The behavior of the -option was changed in 2.1.57 so it is now recommended to specify this -option. - -The is a comma-separated list of the sub-options listed -below. This option is organized similar to the Atari version of the -"video"-option (4.1), but knows fewer sub-options. - -5.1.1) video mode ------------------ - -Again, similar to the video mode for the Atari (see 4.1.1). Predefined -modes depend on the used frame buffer device. - -OCS, ECS and AGA machines all use the color frame buffer. The following -predefined video modes are available: - -NTSC modes: - - ntsc : 640x200, 15 kHz, 60 Hz - - ntsc-lace : 640x400, 15 kHz, 60 Hz interlaced - -PAL modes: - - pal : 640x256, 15 kHz, 50 Hz - - pal-lace : 640x512, 15 kHz, 50 Hz interlaced - -ECS modes: - - multiscan : 640x480, 29 kHz, 57 Hz - - multiscan-lace : 640x960, 29 kHz, 57 Hz interlaced - - euro36 : 640x200, 15 kHz, 72 Hz - - euro36-lace : 640x400, 15 kHz, 72 Hz interlaced - - euro72 : 640x400, 29 kHz, 68 Hz - - euro72-lace : 640x800, 29 kHz, 68 Hz interlaced - - super72 : 800x300, 23 kHz, 70 Hz - - super72-lace : 800x600, 23 kHz, 70 Hz interlaced - - dblntsc-ff : 640x400, 27 kHz, 57 Hz - - dblntsc-lace : 640x800, 27 kHz, 57 Hz interlaced - - dblpal-ff : 640x512, 27 kHz, 47 Hz - - dblpal-lace : 640x1024, 27 kHz, 47 Hz interlaced - - dblntsc : 640x200, 27 kHz, 57 Hz doublescan - - dblpal : 640x256, 27 kHz, 47 Hz doublescan - -VGA modes: - - vga : 640x480, 31 kHz, 60 Hz - - vga70 : 640x400, 31 kHz, 70 Hz - -Please notice that the ECS and VGA modes require either an ECS or AGA -chipset, and that these modes are limited to 2-bit color for the ECS -chipset and 8-bit color for the AGA chipset. - -5.1.2) depth ------------- - -:Syntax: depth: - -Specify the number of bit-planes for the selected video-mode. - -5.1.3) inverse --------------- - -Use inverted display (black on white). Functionally the same as the -"inverse" sub-option for the Atari. - -5.1.4) font ------------ - -:Syntax: font: - -Specify the font to use in text modes. Functionally the same as the -"font" sub-option for the Atari, except that `PEARL8x8` is used instead -of `VGA8x8` if the vertical size of the display is less than 400 pixel -rows. - -5.1.5) monitorcap: -------------------- - -:Syntax: monitorcap:;;; - -This describes the capabilities of a multisync monitor. For now, only -the color frame buffer uses the settings of "monitorcap:". - - and are the minimum and maximum, resp., vertical frequencies -your monitor can work with, in Hz. and are the same for -the horizontal frequency, in kHz. - -The defaults are 50;90;15;38 (Generic Amiga multisync monitor). - - -5.2) fd_def_df0= ----------------- - -:Syntax: fd_def_df0= - -Sets the df0 value for "silent" floppy drives. The value should be in -hexadecimal with "0x" prefix. - - -5.3) wd33c93= -------------- - -:Syntax: wd33c93= - -These options affect the A590/A2091, A3000 and GVP Series II SCSI -controllers. - -The is a comma-separated list of the sub-options listed -below. - -5.3.1) nosync -------------- - -:Syntax: nosync:bitmask - -bitmask is a byte where the 1st 7 bits correspond with the 7 -possible SCSI devices. Set a bit to prevent sync negotiation on that -device. To maintain backwards compatibility, a command-line such as -"wd33c93=255" will be automatically translated to -"wd33c93=nosync:0xff". The default is to disable sync negotiation for -all devices, eg. nosync:0xff. - -5.3.2) period -------------- - -:Syntax: period:ns - -`ns` is the minimum # of nanoseconds in a SCSI data transfer -period. Default is 500; acceptable values are 250 - 1000. - -5.3.3) disconnect ------------------ - -:Syntax: disconnect:x - -Specify x = 0 to never allow disconnects, 2 to always allow them. -x = 1 does 'adaptive' disconnects, which is the default and generally -the best choice. - -5.3.4) debug ------------- - -:Syntax: debug:x - -If `DEBUGGING_ON` is defined, x is a bit mask that causes various -types of debug output to printed - see the DB_xxx defines in -wd33c93.h. - -5.3.5) clock ------------- - -:Syntax: clock:x - -x = clock input in MHz for WD33c93 chip. Normal values would be from -8 through 20. The default value depends on your hostadapter(s), -default for the A3000 internal controller is 14, for the A2091 it's 8 -and for the GVP hostadapters it's either 8 or 14, depending on the -hostadapter and the SCSI-clock jumper present on some GVP -hostadapters. - -5.3.6) next ------------ - -No argument. Used to separate blocks of keywords when there's more -than one wd33c93-based host adapter in the system. - -5.3.7) nodma ------------- - -:Syntax: nodma:x - -If x is 1 (or if the option is just written as "nodma"), the WD33c93 -controller will not use DMA (= direct memory access) to access the -Amiga's memory. This is useful for some systems (like A3000's and -A4000's with the A3640 accelerator, revision 3.0) that have problems -using DMA to chip memory. The default is 0, i.e. to use DMA if -possible. - - -5.4) gvp11= ------------ - -:Syntax: gvp11= - -The earlier versions of the GVP driver did not handle DMA -address-mask settings correctly which made it necessary for some -people to use this option, in order to get their GVP controller -running under Linux. These problems have hopefully been solved and the -use of this option is now highly unrecommended! - -Incorrect use can lead to unpredictable behavior, so please only use -this option if you *know* what you are doing and have a reason to do -so. In any case if you experience problems and need to use this -option, please inform us about it by mailing to the Linux/68k kernel -mailing list. - -The address mask set by this option specifies which addresses are -valid for DMA with the GVP Series II SCSI controller. An address is -valid, if no bits are set except the bits that are set in the mask, -too. - -Some versions of the GVP can only DMA into a 24 bit address range, -some can address a 25 bit address range while others can use the whole -32 bit address range for DMA. The correct setting depends on your -controller and should be autodetected by the driver. An example is the -24 bit region which is specified by a mask of 0x00fffffe. -- cgit v1.2.3