From 57d1617137dd61825a3a7cebf61015f58afce510 Mon Sep 17 00:00:00 2001 From: Eduardo Valentin Date: Fri, 7 Jun 2013 11:11:53 -0400 Subject: thermal: ti-soc-thermal: use standard GPIO DT bindings This change updates the ti-soc-thermal driver to use standard GPIO DT bindings to read the GPIO number associated to thermal shutdown IRQ, in case the device features it. Previously, the code was using a specific DT bindings. As now OMAP supports the standard way to model GPIOs, there is no point in having a ti specific binding. Cc: Zhang Rui Cc: Grant Likely Cc: Rob Herring Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: devicetree-discuss@lists.ozlabs.org Signed-off-by: Eduardo Valentin --- Documentation/devicetree/bindings/thermal/ti_soc_thermal.txt | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/thermal/ti_soc_thermal.txt b/Documentation/devicetree/bindings/thermal/ti_soc_thermal.txt index 1953b33cad51..0c9222d27fae 100644 --- a/Documentation/devicetree/bindings/thermal/ti_soc_thermal.txt +++ b/Documentation/devicetree/bindings/thermal/ti_soc_thermal.txt @@ -17,8 +17,9 @@ Required properties: - interrupts : this entry should indicate which interrupt line the talert signal is routed to; Specific: -- ti,tshut-gpio : this entry should be used to inform which GPIO -line the tshut signal is routed to; +- gpios : this entry should be used to inform which GPIO +line the tshut signal is routed to. The informed GPIO will +be treated as an IRQ; - regs : this entry must also be specified and it is specific to each bandgap version, because the mapping may change from soc to soc, apart of depending on available features. @@ -37,7 +38,7 @@ bandgap { 0x4a002378 0x18>; compatible = "ti,omap4460-bandgap"; interrupts = <0 126 4>; /* talert */ - ti,tshut-gpio = <86>; + gpios = <&gpio3 22 0>; /* tshut */ }; OMAP4470: @@ -47,7 +48,7 @@ bandgap { 0x4a002378 0x18>; compatible = "ti,omap4470-bandgap"; interrupts = <0 126 4>; /* talert */ - ti,tshut-gpio = <86>; + gpios = <&gpio3 22 0>; /* tshut */ }; OMAP5430: -- cgit v1.2.3