From 6acfcd0d75244178a4a101fe0da888fa3bff29fb Mon Sep 17 00:00:00 2001 From: SeongJae Park Date: Mon, 13 Jun 2022 19:23:01 +0000 Subject: Docs/admin-guide/damon: add a document for DAMON_LRU_SORT This commit documents the usage of DAMON_LRU_SORT for admins. Link: https://lkml.kernel.org/r/20220613192301.8817-10-sj@kernel.org Signed-off-by: SeongJae Park Cc: Jonathan Corbet Signed-off-by: Andrew Morton --- Documentation/admin-guide/mm/damon/index.rst | 1 + Documentation/admin-guide/mm/damon/lru_sort.rst | 294 ++++++++++++++++++++++++ 2 files changed, 295 insertions(+) create mode 100644 Documentation/admin-guide/mm/damon/lru_sort.rst (limited to 'Documentation') diff --git a/Documentation/admin-guide/mm/damon/index.rst b/Documentation/admin-guide/mm/damon/index.rst index c4681fa69b9c..05500042f777 100644 --- a/Documentation/admin-guide/mm/damon/index.rst +++ b/Documentation/admin-guide/mm/damon/index.rst @@ -14,3 +14,4 @@ optimize those. start usage reclaim + lru_sort diff --git a/Documentation/admin-guide/mm/damon/lru_sort.rst b/Documentation/admin-guide/mm/damon/lru_sort.rst new file mode 100644 index 000000000000..c09cace80651 --- /dev/null +++ b/Documentation/admin-guide/mm/damon/lru_sort.rst @@ -0,0 +1,294 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============================= +DAMON-based LRU-lists Sorting +============================= + +DAMON-based LRU-lists Sorting (DAMON_LRU_SORT) is a static kernel module that +aimed to be used for proactive and lightweight data access pattern based +(de)prioritization of pages on their LRU-lists for making LRU-lists a more +trusworthy data access pattern source. + +Where Proactive LRU-lists Sorting is Required? +============================================== + +As page-granularity access checking overhead could be significant on huge +systems, LRU lists are normally not proactively sorted but partially and +reactively sorted for special events including specific user requests, system +calls and memory pressure. As a result, LRU lists are sometimes not so +perfectly prepared to be used as a trustworthy access pattern source for some +situations including reclamation target pages selection under sudden memory +pressure. + +Because DAMON can identify access patterns of best-effort accuracy while +inducing only user-specified range of overhead, proactively running +DAMON_LRU_SORT could be helpful for making LRU lists more trustworthy access +pattern source with low and controlled overhead. + +How It Works? +============= + +DAMON_LRU_SORT finds hot pages (pages of memory regions that showing access +rates that higher than a user-specified threshold) and cold pages (pages of +memory regions that showing no access for a time that longer than a +user-specified threshold) using DAMON, and prioritizes hot pages while +deprioritizing cold pages on their LRU-lists. To avoid it consuming too much +CPU for the prioritizations, a CPU time usage limit can be configured. Under +the limit, it prioritizes and deprioritizes more hot and cold pages first, +respectively. System administrators can also configure under what situation +this scheme should automatically activated and deactivated with three memory +pressure watermarks. + +Its default parameters for hotness/coldness thresholds and CPU quota limit are +conservatively chosen. That is, the module under its default parameters could +be widely used without harm for common situations while providing a level of +benefits for systems having clear hot/cold access patterns under memory +pressure while consuming only a limited small portion of CPU time. + +Interface: Module Parameters +============================ + +To use this feature, you should first ensure your system is running on a kernel +that is built with ``CONFIG_DAMON_LRU_SORT=y``. + +To let sysadmins enable or disable it and tune for the given system, +DAMON_LRU_SORT utilizes module parameters. That is, you can put +``damon_lru_sort.=`` on the kernel boot command line or write +proper values to ``/sys/modules/damon_lru_sort/parameters/`` files. + +Below are the description of each parameter. + +enabled +------- + +Enable or disable DAMON_LRU_SORT. + +You can enable DAMON_LRU_SORT by setting the value of this parameter as ``Y``. +Setting it as ``N`` disables DAMON_LRU_SORT. Note that DAMON_LRU_SORT could do +no real monitoring and LRU-lists sorting due to the watermarks-based activation +condition. Refer to below descriptions for the watermarks parameter for this. + +commit_inputs +------------- + +Make DAMON_LRU_SORT reads the input parameters again, except ``enabled``. + +Input parameters that updated while DAMON_LRU_SORT is running are not applied +by default. Once this parameter is set as ``Y``, DAMON_LRU_SORT reads values +of parametrs except ``enabled`` again. Once the re-reading is done, this +parameter is set as ``N``. If invalid parameters are found while the +re-reading, DAMON_LRU_SORT will be disabled. + +hot_thres_access_freq +--------------------- + +Access frequency threshold for hot memory regions identification in permil. + +If a memory region is accessed in frequency of this or higher, DAMON_LRU_SORT +identifies the region as hot, and mark it as accessed on the LRU list, so that +it could not be reclaimed under memory pressure. 50% by default. + +cold_min_age +------------ + +Time threshold for cold memory regions identification in microseconds. + +If a memory region is not accessed for this or longer time, DAMON_LRU_SORT +identifies the region as cold, and mark it as unaccessed on the LRU list, so +that it could be reclaimed first under memory pressure. 120 seconds by +default. + +quota_ms +-------- + +Limit of time for trying the LRU lists sorting in milliseconds. + +DAMON_LRU_SORT tries to use only up to this time within a time window +(quota_reset_interval_ms) for trying LRU lists sorting. This can be used +for limiting CPU consumption of DAMON_LRU_SORT. If the value is zero, the +limit is disabled. + +10 ms by default. + +quota_reset_interval_ms +----------------------- + +The time quota charge reset interval in milliseconds. + +The charge reset interval for the quota of time (quota_ms). That is, +DAMON_LRU_SORT does not try LRU-lists sorting for more than quota_ms +milliseconds or quota_sz bytes within quota_reset_interval_ms milliseconds. + +1 second by default. + +wmarks_interval +--------------- + +The watermarks check time interval in microseconds. + +Minimal time to wait before checking the watermarks, when DAMON_LRU_SORT is +enabled but inactive due to its watermarks rule. 5 seconds by default. + +wmarks_high +----------- + +Free memory rate (per thousand) for the high watermark. + +If free memory of the system in bytes per thousand bytes is higher than this, +DAMON_LRU_SORT becomes inactive, so it does nothing but periodically checks the +watermarks. 200 (20%) by default. + +wmarks_mid +---------- + +Free memory rate (per thousand) for the middle watermark. + +If free memory of the system in bytes per thousand bytes is between this and +the low watermark, DAMON_LRU_SORT becomes active, so starts the monitoring and +the LRU-lists sorting. 150 (15%) by default. + +wmarks_low +---------- + +Free memory rate (per thousand) for the low watermark. + +If free memory of the system in bytes per thousand bytes is lower than this, +DAMON_LRU_SORT becomes inactive, so it does nothing but periodically checks the +watermarks. 50 (5%) by default. + +sample_interval +--------------- + +Sampling interval for the monitoring in microseconds. + +The sampling interval of DAMON for the cold memory monitoring. Please refer to +the DAMON documentation (:doc:`usage`) for more detail. 5ms by default. + +aggr_interval +------------- + +Aggregation interval for the monitoring in microseconds. + +The aggregation interval of DAMON for the cold memory monitoring. Please +refer to the DAMON documentation (:doc:`usage`) for more detail. 100ms by +default. + +min_nr_regions +-------------- + +Minimum number of monitoring regions. + +The minimal number of monitoring regions of DAMON for the cold memory +monitoring. This can be used to set lower-bound of the monitoring quality. +But, setting this too high could result in increased monitoring overhead. +Please refer to the DAMON documentation (:doc:`usage`) for more detail. 10 by +default. + +max_nr_regions +-------------- + +Maximum number of monitoring regions. + +The maximum number of monitoring regions of DAMON for the cold memory +monitoring. This can be used to set upper-bound of the monitoring overhead. +However, setting this too low could result in bad monitoring quality. Please +refer to the DAMON documentation (:doc:`usage`) for more detail. 1000 by +defaults. + +monitor_region_start +-------------------- + +Start of target memory region in physical address. + +The start physical address of memory region that DAMON_LRU_SORT will do work +against. By default, biggest System RAM is used as the region. + +monitor_region_end +------------------ + +End of target memory region in physical address. + +The end physical address of memory region that DAMON_LRU_SORT will do work +against. By default, biggest System RAM is used as the region. + +kdamond_pid +----------- + +PID of the DAMON thread. + +If DAMON_LRU_SORT is enabled, this becomes the PID of the worker thread. Else, +-1. + +nr_lru_sort_tried_hot_regions +----------------------------- + +Number of hot memory regions that tried to be LRU-sorted. + +bytes_lru_sort_tried_hot_regions +-------------------------------- + +Total bytes of hot memory regions that tried to be LRU-sorted. + +nr_lru_sorted_hot_regions +------------------------- + +Number of hot memory regions that successfully be LRU-sorted. + +bytes_lru_sorted_hot_regions +---------------------------- + +Total bytes of hot memory regions that successfully be LRU-sorted. + +nr_hot_quota_exceeds +-------------------- + +Number of times that the time quota limit for hot regions have exceeded. + +nr_lru_sort_tried_cold_regions +------------------------------ + +Number of cold memory regions that tried to be LRU-sorted. + +bytes_lru_sort_tried_cold_regions +--------------------------------- + +Total bytes of cold memory regions that tried to be LRU-sorted. + +nr_lru_sorted_cold_regions +-------------------------- + +Number of cold memory regions that successfully be LRU-sorted. + +bytes_lru_sorted_cold_regions +----------------------------- + +Total bytes of cold memory regions that successfully be LRU-sorted. + +nr_cold_quota_exceeds +--------------------- + +Number of times that the time quota limit for cold regions have exceeded. + +Example +======= + +Below runtime example commands make DAMON_LRU_SORT to find memory regions +having >=50% access frequency and LRU-prioritize while LRU-deprioritizing +memory regions that not accessed for 120 seconds. The prioritization and +deprioritization is limited to be done using only up to 1% CPU time to avoid +DAMON_LRU_SORT consuming too much CPU time for the (de)prioritization. It also +asks DAMON_LRU_SORT to do nothing if the system's free memory rate is more than +50%, but start the real works if it becomes lower than 40%. If DAMON_RECLAIM +doesn't make progress and therefore the free memory rate becomes lower than +20%, it asks DAMON_LRU_SORT to do nothing again, so that we can fall back to +the LRU-list based page granularity reclamation. :: + + # cd /sys/modules/damon_lru_sort/parameters + # echo 500 > hot_thres_access_freq + # echo 120000000 > cold_min_age + # echo 10 > quota_ms + # echo 1000 > quota_reset_interval_ms + # echo 500 > wmarks_high + # echo 400 > wmarks_mid + # echo 200 > wmarks_low + # echo Y > enabled -- cgit v1.2.3