From d8bdd1e8acd54631a59c56f637b18816c5381f61 Mon Sep 17 00:00:00 2001 From: Kelly Hung Date: Tue, 30 Apr 2024 12:58:53 +0800 Subject: ARM: dts: aspeed: x4tf: Add dts for asus x4tf project Base on aspeed-g6.dtsi and can boot into BMC console. Signed-off-by: Kelly Hung Reviewed-by: Andrew Jeffery Link: https://lore.kernel.org/r/20240430045853.3894633-3-Kelly_Hung@asus.com Signed-off-by: Joel Stanley --- arch/arm/boot/dts/aspeed/aspeed-bmc-asus-x4tf.dts | 581 ++++++++++++++++++++++ 1 file changed, 581 insertions(+) create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-asus-x4tf.dts (limited to 'arch/arm/boot/dts/aspeed/aspeed-bmc-asus-x4tf.dts') diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asus-x4tf.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asus-x4tf.dts new file mode 100644 index 000000000000..64f4ed07c7d2 --- /dev/null +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asus-x4tf.dts @@ -0,0 +1,581 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +// Copyright 2024 ASUS Corp. + +/dts-v1/; + +#include "aspeed-g6.dtsi" +#include "aspeed-g6-pinctrl.dtsi" +#include +#include + +/ { + model = "ASUS-X4TF"; + compatible = "asus,x4tf-bmc", "aspeed,ast2600"; + + aliases { + serial4 = &uart5; + }; + + chosen { + stdout-path = "serial4:115200n8"; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x40000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + video_engine_memory: video { + size = <0x04000000>; + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>, + <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>, + <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>, + <&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>; + }; + + leds { + compatible = "gpio-leds"; + + led-heartbeat { + gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + + led-uid { + gpios = <&gpio0 ASPEED_GPIO(P, 1) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + default-state = "off"; + }; + + led-status_Y { + gpios = <&gpio1 ASPEED_GPIO(B, 1) GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led-sys_boot_status { + gpios = <&gpio1 ASPEED_GPIO(B, 0) GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; +}; + +&adc0 { + vref = <2500>; + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default + &pinctrl_adc2_default &pinctrl_adc3_default + &pinctrl_adc4_default &pinctrl_adc5_default + &pinctrl_adc6_default &pinctrl_adc7_default>; +}; + +&adc1 { + vref = <2500>; + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default + &pinctrl_adc10_default &pinctrl_adc11_default + &pinctrl_adc12_default &pinctrl_adc13_default + &pinctrl_adc14_default &pinctrl_adc15_default>; +}; + +&peci0 { + status = "okay"; +}; + +&lpc_snoop { + snoop-ports = <0x80>; + status = "okay"; +}; + +&mac2 { + status = "okay"; + phy-mode = "rmii"; + use-ncsi; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii3_default>; +}; + +&mac3 { + status = "okay"; + phy-mode = "rmii"; + use-ncsi; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii4_default>; +}; + +&fmc { + status = "okay"; + + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + spi-max-frequency = <50000000>; +#include "openbmc-flash-layout-64.dtsi" + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash@0 { + status = "okay"; + label = "bios"; + spi-max-frequency = <50000000>; + }; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; + + temperature-sensor@48 { + compatible = "ti,tmp75"; + reg = <0x48>; + }; + + temperature-sensor@49 { + compatible = "ti,tmp75"; + reg = <0x49>; + }; + + pca9555_4_20: gpio@20 { + compatible = "nxp,pca9555"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + + pca9555_4_22: gpio@22 { + compatible = "nxp,pca9555"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + }; + + pca9555_4_24: gpio@24 { + compatible = "nxp,pca9555"; + reg = <0x24>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + /*A0 - A3 0*/ "", "STRAP_BMC_BATTERY_GPIO1", "", "", + /*A4 - A7 4*/ "", "", "", "", + /*B0 - B7 8*/ "", "", "", "", "", "", "", ""; + }; + + pca9555_4_26: gpio@26 { + compatible = "nxp,pca9555"; + reg = <0x26>; + gpio-controller; + #gpio-cells = <2>; + }; + + i2c-mux@70 { + compatible = "nxp,pca9546"; + status = "okay"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + channel_1: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + channel_2: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + channel_3: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + channel_4: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; +}; + +&i2c5 { + status = "okay"; + + pca9555_5_24: gpio@24 { + compatible = "nxp,pca9555"; + reg = <0x24>; + gpio-controller; + #gpio-cells = <2>; + }; + + i2c-mux@70 { + compatible = "nxp,pca9546"; + status = "okay"; + reg = <0x70 >; + #address-cells = <1>; + #size-cells = <0>; + + channel_5: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + pca9555_5_5_20: gpio@20 { + compatible = "nxp,pca9555"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "SYS_FAN6", "SYS_FAN5", + "SYS_FAN4", "SYS_FAN3", + "SYS_FAN2", "SYS_FAN1"; + }; + + pca9555_5_5_21: gpio@21 { + compatible = "nxp,pca9555"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; + + power-monitor@44 { + compatible = "ti,ina219"; + reg = <0x44>; + shunt-resistor = <2>; + }; + }; + + channel_6: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + channel_7: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + channel_8: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; +}; + +&i2c6 { + status = "okay"; + + pca9555_6_27: gpio@27 { + compatible = "nxp,pca9555"; + reg = <0x27>; + gpio-controller; + #gpio-cells = <2>; + }; + + pca9555_6_20: gpio@20 { + compatible = "nxp,pca9555"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + /*A0 0*/ "", "", "", "", "", "", "", "", + /*B0 8*/ "Drive_NVMe1", "Drive_NVMe2", "", "", + /*B4 12*/ "", "", "", ""; + }; + + pca9555_6_21: gpio@21 { + compatible = "nxp,pca9555"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&i2c7 { + status = "okay"; + + i2c-mux@70 { + compatible = "nxp,pca9546"; + status = "okay"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + idle-state = <1>; + + channel_9: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + temperature-sensor@48 { + compatible = "ti,tmp75"; + reg = <0x48>; + }; + + temperature-sensor@49 { + compatible = "ti,tmp75"; + reg = <0x49>; + }; + + power-monitor@40 { + compatible = "ti,ina219"; + reg = <0x40>; + shunt-resistor = <2>; + }; + + power-monitor@41 { + compatible = "ti,ina219"; + reg = <0x41>; + shunt-resistor = <5>; + }; + }; + + channel_10: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + channel_11: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + channel_12: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + + i2c-mux@71 { + compatible = "nxp,pca9546"; + status = "okay"; + reg = <0x71>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + channel_13: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + channel_14: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + channel_15: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + channel_16: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; +}; + +&i2c8 { + status = "okay"; + + i2c-mux@70 { + compatible = "nxp,pca9546"; + status = "okay"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + channel_17: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + channel_18: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + temperature-sensor@48 { + compatible = "ti,tmp75"; + reg = <0x48>; + }; + + power-monitor@41 { + compatible = "ti,ina219"; + reg = <0x41>; + shunt-resistor = <5>; + }; + }; + + channel_19: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + channel_20: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; +}; + +&i2c9 { + status = "okay"; +}; + +&i2c10 { + status = "okay"; +}; + +&i2c11 { + status = "okay"; +}; + +&i2c14 { + status = "okay"; + multi-master; + + eeprom@50 { + compatible = "atmel,24c08"; + reg = <0x50>; + }; + + eeprom@51 { + compatible = "atmel,24c08"; + reg = <0x51>; + }; +}; + +&sgpiom0 { + status = "okay"; + ngpios = <128>; +}; + +&video { + status = "okay"; + memory-region = <&video_engine_memory>; +}; + +&sdc { + status = "okay"; +}; + +&lpc_snoop { + status = "okay"; + snoop-ports = <0x80>; +}; + +&kcs1 { + aspeed,lpc-io-reg = <0xca0>; + status = "okay"; +}; + +&kcs2 { + aspeed,lpc-io-reg = <0xca8>; + status = "okay"; +}; + +&kcs3 { + aspeed,lpc-io-reg = <0xca2>; + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; + +&uart_routing { + status = "okay"; +}; + +&vhub { + status = "okay"; +}; + +&gpio0 { + gpio-line-names = + /*A0 0*/ "", "", "", "", "", "", "", "", + /*B0 8*/ "", "", "", "", "", "", "PS_PWROK", "", + /*C0 16*/ "", "", "", "", "", "", "", "", + /*D0 24*/ "", "", "", "", "", "", "", "", + /*E0 32*/ "", "", "", "", "", "", "", "", + /*F0 40*/ "", "", "", "", "", "", "", "", + /*G0 48*/ "", "", "", "", "", "", "", "", + /*H0 56*/ "", "", "", "", "", "", "", "", + /*I0 64*/ "", "", "", "", "", "", "", "", + /*J0 72*/ "", "", "", "", "", "", "", "", + /*K0 80*/ "", "", "", "", "", "", "", "", + /*L0 88*/ "", "", "", "", "", "", "", "", + /*M0 96*/ "", "", "", "", "", "", "", "", + /*N0 104*/ "", "", "", "", + /*N4 108*/ "POST_COMPLETE", "ESR1_GPIO_AST_SPISEL", "", "", + /*O0 112*/ "", "", "", "", "", "", "", "", + /*P0 120*/ "ID_BUTTON", "ID_OUT", "POWER_BUTTON", "POWER_OUT", + /*P4 124*/ "RESET_BUTTON", "RESET_OUT", "", "HEARTBEAT", + /*Q0 128*/ "", "", "", "", "", "", "", "", + /*R0 136*/ "", "", "", "", "", "", "", "", + /*S0 144*/ "", "", "", "", "", "", "", "", + /*T0 152*/ "", "", "", "", "", "", "", "", + /*U0 160*/ "", "", "", "", "", "", "", "", + /*V0 168*/ "", "", "", "", "", "", "", "", + /*W0 176*/ "", "", "", "", "", "", "", "", + /*X0 184*/ "", "", "", "", "", "", "", "", + /*Y0 192*/ "", "", "", "", "", "", "", "", + /*Z0 200*/ "", "", "", "", "", "", "", ""; +}; -- cgit v1.2.3