From 83bd18b46600a37d977e811dca1334e09a6e03eb Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Thu, 7 May 2020 09:59:31 -0700
Subject: ARM: dts: Configure system timers for ti81xx

We can now init system timers using the dmtimer and 32k counter
based on only devicetree data and drivers/clocksource timers.
Let's configure the clocksource and clockevent, and drop the old
unused platform data.

As we're just dropping platform data, and the early platform data
init is based on the custom ti,hwmods property, we want to drop
both the platform data and ti,hwmods property in a single patch.

Since the dmtimer can use both 32k clock and system clock as the
source, let's also configure the SoC specific default values. The
board specific dts files can reconfigure these with assigned-clocks
and assigned-clock-parents as needed.

Note that for ti81xx, also timer1 is of type 2 unlike on am335x
where timer1 is type1 while the rest of the timers are type 2.

Cc: devicetree@vger.kernel.org
Cc: Brian Hutchinson <b.hutchman@gmail.com>
Cc: Graeme Smecher <gsmecher@threespeedlogic.com>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/dm814x.dtsi | 74 ++++++++++++++++++++++++++++++++++++-------
 1 file changed, 63 insertions(+), 11 deletions(-)

(limited to 'arch/arm/boot/dts/dm814x.dtsi')

diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/dm814x.dtsi
index 44ed5a798164..a172cf5cf29c 100644
--- a/arch/arm/boot/dts/dm814x.dtsi
+++ b/arch/arm/boot/dts/dm814x.dtsi
@@ -308,14 +308,30 @@
 				ti,hwmods = "mcspi4";
 			};
 
-			timer1: timer@2e000 {
-				compatible = "ti,dm814-timer";
-				reg = <0x2e000 0x2000>;
-				interrupts = <67>;
-				ti,hwmods = "timer1";
-				ti,timer-alwon;
+			timer1_target: target-module@2e000 {
+				compatible = "ti,sysc-omap4-timer", "ti,sysc";
+				reg = <0x2e000 0x4>,
+				      <0x2e010 0x4>;
+				reg-names = "rev", "sysc";
+				ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+				ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+						<SYSC_IDLE_NO>,
+						<SYSC_IDLE_SMART>,
+						<SYSC_IDLE_SMART_WKUP>;
 				clocks = <&timer1_fck>;
 				clock-names = "fck";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x2e000 0x1000>;
+
+				timer1: timer@0 {
+					compatible = "ti,am335x-timer-1ms";
+					reg = <0x0 0x400>;
+					interrupts = <67>;
+					ti,timer-alwon;
+					clocks = <&timer1_fck>;
+					clock-names = "fck";
+				};
 			};
 
 			uart1: uart@20000 {
@@ -348,13 +364,29 @@
 				dma-names = "tx", "rx";
 			};
 
-			timer2: timer@40000 {
-				compatible = "ti,dm814-timer";
-				reg = <0x40000 0x2000>;
-				interrupts = <68>;
-				ti,hwmods = "timer2";
+			timer2_target: target-module@40000 {
+				compatible = "ti,sysc-omap4-timer", "ti,sysc";
+				reg = <0x40000 0x4>,
+				      <0x40010 0x4>;
+				reg-names = "rev", "sysc";
+				ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+				ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+						<SYSC_IDLE_NO>,
+						<SYSC_IDLE_SMART>,
+						<SYSC_IDLE_SMART_WKUP>;
 				clocks = <&timer2_fck>;
 				clock-names = "fck";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x40000 0x1000>;
+
+				timer2: timer@0 {
+					compatible = "ti,dm814-timer";
+					reg = <0 0x1000>;
+					interrupts = <68>;
+					clocks = <&timer2_fck>;
+					clock-names = "fck";
+				};
 			};
 
 			timer3: timer@42000 {
@@ -735,3 +767,23 @@
 };
 
 #include "dm814x-clocks.dtsi"
+
+/* Preferred always-on timer for clocksource */
+&timer1_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		assigned-clocks = <&timer1_fck>;
+		assigned-clock-parents = <&devosc_ck>;
+	};
+};
+
+/* Preferred timer for clockevent */
+&timer2_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		assigned-clocks = <&timer2_fck>;
+		assigned-clock-parents = <&devosc_ck>;
+	};
+};
-- 
cgit v1.2.3