From 9b483b889da23998f973cf683f0935879a7ff294 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Thu, 29 Mar 2018 00:22:23 +1000 Subject: ARM: dts: imx6ull: add UART5 input select register definitions MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The iMX6ULL UART5_RX_DATA_SELECT_INPUT DAISY Register has some different bit definitions to that same register in the iMX6UL. The bits for the iMX6UL: 000 CSI_DATA00_ALT8 — Selecting Pad: CSI_DATA00 for Mode: ALT8 001 CSI_DATA01_ALT8 — Selecting Pad: CSI_DATA01 for Mode: ALT8 010 GPIO1_IO04_ALT8 — Selecting Pad: GPIO1_IO04 for Mode: ALT8 011 GPIO1_IO05_ALT8 — Selecting Pad: GPIO1_IO05 for Mode: ALT 100 UART5_TX_DATA_ALT0 — Selecting Pad: UART5_TX_DATA for Mode: ALT 101 UART5_RX_DATA_ALT0 — Selecting Pad: UART5_RX_DATA for Mode: ALT But for the iMX6ULL: 000 CSI_DATA00_ALT8 — Selecting Pad: CSI_DATA00 for Mode: ALT8 001 CSI_DATA01_ALT8 — Selecting Pad: CSI_DATA01 for Mode: ALT8 010 GPIO1_IO04_ALT8 — Selecting Pad: GPIO1_IO04 for Mode: ALT8 011 GPIO1_IO05_ALT8 — Selecting Pad: GPIO1_IO05 for Mode: ALT 100 UART1_TX_DATA_ALT9 — Selecting Pad: UART1_TX_DATA for Mode: ALT9 101 UART1_RX_DATA_ALT9 — Selecting Pad: UART1_RX_DATA for Mode: ALT9 110 UART5_TX_DATA_ALT0 — Selecting Pad: UART5_TX_DATA for Mode: ALT0 111 UART5_RX_DATA_ALT0 — Selecting Pad: UART5_RX_DATA for Mode: ALT0 Specifically for a board I am working on with the serial console on UART5 I need to be able to enable UART5_RX_DATA_ALT0 mode. There is no definition for the iMX6ULL version of that in imx6ul-pinfunc.h or imx6ull-pinfunc.h. Add definitions for the missing UART5 input select register bits of the iMX6ULL. Signed-off-by: Greg Ungerer Acked-by: Stefan Wahren Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6ull-pinfunc.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/arm/boot/dts/imx6ull-pinfunc.h') diff --git a/arch/arm/boot/dts/imx6ull-pinfunc.h b/arch/arm/boot/dts/imx6ull-pinfunc.h index 118202336691..090846b97680 100644 --- a/arch/arm/boot/dts/imx6ull-pinfunc.h +++ b/arch/arm/boot/dts/imx6ull-pinfunc.h @@ -14,6 +14,10 @@ * The pin function ID is a tuple of * */ +#define MX6ULL_PAD_UART1_TX_DATA__UART5_DTE_RX 0x0084 0x0310 0x0644 0x9 0x4 +#define MX6ULL_PAD_UART1_RX_DATA__UART5_DCE_RX 0x0088 0x0314 0x0644 0x9 0x5 +#define MX6ULL_PAD_UART5_TX_DATA__UART5_DTE_RX 0x00BC 0x0348 0x0644 0x0 0x6 +#define MX6ULL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x00C0 0x034C 0x0644 0x0 0x7 #define MX6ULL_PAD_ENET2_RX_DATA0__EPDC_SDDO08 0x00E4 0x0370 0x0000 0x9 0x0 #define MX6ULL_PAD_ENET2_RX_DATA1__EPDC_SDDO09 0x00E8 0x0374 0x0000 0x9 0x0 #define MX6ULL_PAD_ENET2_RX_EN__EPDC_SDDO10 0x00EC 0x0378 0x0000 0x9 0x0 -- cgit v1.2.3